Google Search

Search

Already a Member ?

Investment Opportunities & Business Ideas in Africa- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

How do you identify business opportunities in Africa?

 

Industry experts are beginning to view Africa as the “new Asia” in terms of economic growth and business opportunity. 

Africa is becoming an increasingly attractive hub for investors in light of various economic, political and social reforms that are sweeping through the continent, resulting in a much improved business environment conducive for foreign direct investment. Apart from that, there is widespread development of critical social and physical infrastructure, and there is an increasing pool of well-educated, English-speaking, enterprising workers in most countries across the continent.

It’s true there are lots of amazing business opportunities in Africa. However, it can get very confusing if you don’t know where to look. In this article, I’ll show you some of the hottest business opportunities in Africa that will create more successful entrepreneurs.


Food Processing & Agriculture:  As the world’s population increases rapidly (recently exceeding the 7 billion mark), global agricultural production must rise to feed these growing numbers. Much of that increased agricultural production will come from Africa. The opportunities in Africa’s food and agribusiness space remain huge and will not go out of fashion anytime soon. The demand of quality food is increasing for a growing population, especially in urban areas. This situation presents many business opportunities in food industry sector. It is time for you to seize these business opportunities by starting a small food processing industry and create value-added products from cereals, grains, nuts, fruits and vegetables.

Invest and start a business in Food Processing & Agriculture in Africa. Here’s some projects for investment:

·         Modern Soyabeans Production

·         Modern Vegetables Production

·         Modern Fruits Production

·         Modern Maize Production

·         Modern Cassava Production

·         Small Scale Rice Mill

·         Small Scale Palm Oil Extraction Mill

·         Honey Processing Plant

·         Poultry Feed Plant

·         Water Purification and Bottling Plant

·         Sugar Cane Production Plant 

·         Dairy Processing Plant

 

Pharmaceuticals: Africa may be the only pharmaceutical market where genuinely high growth is still achievable. Business opportunities are also present in the manufacturing and distribution of pharma products, marketing and sales, and investment groups. Africa’s pharmaceutical markets are growing in every sector. Between 2013 and 2020, prescription drugs are forecast to grow at a compound annual growth rate of 6 percent, generics at 9 percent, over-the-counter medicines at 6 percent, and medical devices at 11 percent. Africa’s pharmaceutical industry has great potential for boosting economic growth and creating jobs. Given current sustained and rapid economic growth, the African pharmaceutical industry, like that of other emerging markets, is expected to grow tremendously in the coming years.

Opportunities for investment in the pharmaceutical and medical supplies sub-sector in Ethiopia include :

A.     Production of essential drugs:  Essential drugs that satisfy the priority health care needs of the population are selected with due regard to public health relevance, evidence on safety, efficacy, quality and comparative cost effectiveness.

B.    Production of raw materials:    There is high opportunity for local production of raw materials for pharmaceutical industries in the country.         

  Following are possible potential of raw material production:

      · Maize starch

      · Refined sugar

      · Glucose syrup

      · Rectified sprite and ethanol

      · Sodium chloride

      · Packaging materials

 

Tourism:   An important factor in the expansion of tourism in Africa relates directly to the number of private companies attracting regional and international investment. Evidence of this growth is in the number of global hotel chains that are investing in major projects in Africa. The rapid growth of tourism in many developing countries also introduces new threats to the environment. Water and energy consumption, utilization of natural resources, and increased wastes are just some potential negative environmental impacts. Through sustainable forms of tourism development many of these impacts can be mitigated. Sustainable tourism development is also smart business, as a growing numbers of travelers increasingly seek environmentally friendly vacation destinations.

You're all geared up and you must find some profitable Tourism Investment Opportunities in Africa. You therefore feel it is wise to use some of your saving to start a Tourism business in Africa. You will find Uganda information on these six (6) major Tourism Investment Opportunities

·         Tour Operators

·         Water Sports

·         Hotel Accommodation

·         Serviced Apartments

·         Conference and Incentives Travel, and

·         National Park Concessions

 

 

 

Building and Construction Supplies:  Africa is going through a construction boom, an opportunity that will certainly create a lot of wealth for entrepreneurs on the continent. High building and construction activities are often signs of growing economies. When the economy looks good, the demand for residential, commercial and all kinds of real estate usually goes through the roof. The successful delivery of the government and the private sector infrastructure programs depends on the effective functioning of many stakeholders – including the building and construction materials sector. Against the need for a healthy building and construction materials sector, the cidb has developed this report on the building and construction materials sector. A key focus of this study has been on:

• Opportunities and challenges in the building and construction materials sector, and specifically;

• Opportunities for new job creation, enterprise development, and empowerment in the building and construction materials sector.

Cement is just one example of several building and construction supplies that are growing in demand across Africa. 

 

Fashion & Beauty:  Africa’s fashion and beauty market is developing at an impressive rate. The continent’s overwhelmingly young population provides a ready market for trendy fashion. All kinds of apparel, including locally-made fabrics and imported designer labels have become hot-selling products across Africa’s rapidly expanding urban areas. Africa has hundreds of rising stars who are building successful businesses in the fashion and beauty industry. The beauty industry in the Middle East and Africa was estimated at about $20.4 billion in 2011, according to the market research company Euromonitor International. South Africa alone represented $3.9 billion; Nigeria and Kenya are second and third among sub-Saharan nations, with Kenya’s market totaling more than $260 million. Over all, Africa is the next frontier for global luxury goods brands. African fashion has enjoyed massive media presence in recent times, which means the world is now aware of the industry and the capabilities of its designers.

 

Reasons for buying our reports:

This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, market potential of the product and reasons for investing in the product

This report provides vital information on the product like its characteristics and segmentation

This report helps you market and place the product correctly by identifying the target customer group of the product 

This report helps you understand the viability of the project by disclosing details like machinery required, project costs and snapshot of other project financials

The report provides a glimpse of government regulations applicable on the industry

The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decisions.

 

Our Approach:

Our research reports broadly cover Indian markets, present analysis, outlook and forecast for a period of five years.

The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players

We use reliable sources of information and databases. And information from such sources is processed by us and included in the report

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 64 of 216 | Total 2155 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 64 215 216   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

DISPOSABLE PLASTIC SYRINGES WITH NEEDLES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Disposable syringes are a great innovation in the field of medical equipment. They are used for intramuscular and intravenous injections and are disposed off immediately after usage. The major advantages of using plastic disposable syringes are that no infection is transmitted since the injection is disposed off immediately after use. The open end of the syringe may be fitted with a hypodermic needle, a nozzle, or tubing to help direct the flow into and out of the barrel or cylindrical tube. Disposable needles are becoming more popular in the medical world due to its lower cost and higher accuracy. Plastic can be used in place of metal without any problem. The procedure is also relatively easy and cheaper. Only one disadvantage is that there is not so much heat resistance as compared to hypodermic needle. Even then the disposable needle has widely replaced hypodermic needle because of lower cost, easy compatibility and higher sterilization. Disposable needle is widely used by doctors for injection purpose with the help of syringes. With the increase in population in our country, requirement of medicine and injections has increased. Plastic syringes are typically manufactured by a process called injection molding. The machines used are called injection molding machines. These machines inject liquefied plastic into a mold which is the shape of a syringe. When the plastic cools, it forms a syringe. For quick relief, needles are used by surgeons, dental surgeons, Veterinary Surgeons and by the breeders in the poultry farm, where the farm birds are periodically injected against epidemics. During epidemics, for better control, disposable needles are of much use. Veterinary Surgeons and doctors find it more useful to use needles. With the development of pharmaceutical industries the use of syringes and disposable needles will also develop. About 70% pharmaceutical industries are in small-scale sector. The output of small-scale sector covers a wide spectrum, anti T.B. drugs, antidysentery drugs, unit rhenemsties, haematirines, hormonal preparations, tranquilizers, analagesties and anti-Ryrities. According to McKinsey & Co. a leading industrial and management consulting organization, the Indian healthcare sector, including pharmaceutical, diagnostics and hospital services, is expected to more than double its revenues to Rs 2000 billion by 2010. Expenditure on healthcare services, including diagnostics, hospital occupancy and outpatient consulting, the largest component of this spend is expected to grow more than 125% to Rs 1560 billion by 2012 from Rs 690 billion now. Now production is very low according to demand will be raised. On that basis it can be concluded that there is a good scope for few new entrepreneurs. Few Major players are as under: Albert David Ltd. Kolkata Disposable Medi-Aids Ltd. Chennai H L L Lifecare Ltd. Thiruvananthapuram Hindustan Syringes & Medical Devices Ltd. Central Delhi Iscon Surgicals Ltd. Jodhpur La Medical Devices Ltd. Faridabad Lifeline Injects Ltd. Mahendragarh Lifelong Meditech Ltd. Gurgaon Nirma Ltd. Ahmadabad Raaj Medisafe India Ltd. Dhar Sangam Health Care Products Ltd. Hyderabad Surgiplast Ltd. Gandhinagar Transmedica (India) Ltd. Chennai
Plant capacity: 120 Lakhs/ AnnumPlant & machinery: 90 Lakhs
Working capital: -T.C.I: Cost of Project : 253 Lakhs
Return: 42.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

BLOOD BAGS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Blood bag is a disposable bio-medical device used for collection, storage, transportation and transfusion of human blood and blood components. The system consist of a single or multiple bag connected with tubing’s, needle, needle cover, clamp etc. The Blood Bags are made of plastic-material, which are compatible with blood. Plasticized-PVC blood bags have been used since the 1950s for the collection of whole blood, the processing of this into plasma, platelets etc., and storage. The phthalate plasticizers, when fed in large quantities to rats, can cause cancer. This does not prove that the storage of whole blood in plasticized PVC bags is a health risk. However, there has been a search for alternative polymers for blood bags. Blood Bags can successfully replace the use of glass bottles for collection storage, transportation and transfusion of blood and blood components since bottles require exhaustive cleaning, rinsing and autoclaving procedures and there are chances of breakage at any stage. Further, use of disposable bags eliminates the possibility of any contamination. In recent times, Blood Bags have become a conspicuous item and a dire need of hospitals and nursing homes to meet blood - infusion emergencies. Blood Bags are most ostensibly serving the medical field in crucial hour. As the number of hospital, nursing home & etc are increasing, the demand for the blood bags, too, is increasing tremendously. Technologies advances achieved by medicare in the recent years have been historic. The Indian scenario has not remained immune to these changes. While IT (information technology) has come to the aid of the breakthroughs, the progress recorded in the medicare area is as impressive as it is in the IT sector itself. The changes are in both, form and content, as well as quantitative and qualitative. These have pervaded almost all specialities, from diagnostics to physiotherapy, from cardiology to oncology, from non-invasive surgery to transplants. In India, the emergence of private medicare services, especially through commercialization and corporatization, has contributed to the transformation. Thanks to rapid commercialization of the medical practices with the establishment of multimillion hospitals, nursing homes & diagnostic centres (specialized and general) the demand has registered a very high growth rate in the recent years. There is a good scope and market potential for new entrepreneurs to venture into this field.
Plant capacity: 30000 Nos./Day Each Bag of Capacity – 450 ML.Plant & machinery: 281 Lakhs
Working capital: -T.C.I: 2186 Lakhs
Return: 45.00%Break even: 36.00%
Add to Inquiry Add to Inquiry Basket

DISPOSABLE PLASTIC SYRINGES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Disposable syringes are a great innovation in the field of medical equipment. They are used for intramuscular and intravenous injections and are disposed off immediately after usage. The major advantages of using disposable syringes are that no infection is transmitted since the injection is disposed off immediately after use. Long before in 1960’s glass syringes which were re-useable after sterilization were being replaced with disposable plastic syringes and single-use needles. With the replacement of traditional glass syringes by disposable syringes for convenience, safety, the demand for plastic disposable syringes is growing at very fast rate. The open end of the syringe may be fitted with a hypodermic needle, a nozzle, or tubing to help direct the flow into and out of the barrel or cylindrical tube. Disposable needle is widely used by doctors for injection purpose with the help of syringes. With the increase in population in our country, requirement of medicine and injections has increased. For more strength of people more number of needles is required with syringes. Tablets or capsules also play a great role in the life of human beings but injections are also a must to some extent. The disposable syringes market has now self-destructing or auto-disable (AD) syringe as a safe bet against re-use and spread of HIV, hepatitis and other infections. The national immunization policy has adopted the non-reusable, self-breaking syringes, though many States are yet to follow suit for the curative injections. Disposable surgical caps and mask are used considerably while performing an operation or undergoing surgical measures. Catheters are used for the purpose of passing urine for bed-ridden and emergency patients in hospitals, nursing homes etc. With the development of pharmaceutical industries the use of syringes and disposable needles will also develop. About 70% pharmaceutical industries are in small-scale sector. Disposable syringes are becoming more popular in the medical world due to its lower cost and higher accuracy. Plastic can be used in place of metal without any problem. The procedure is also relatively easy and cheaper. New comer can well venture into this field. There is a good scope in this sector.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 36.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

EXTRACTION OF PECTIN FROM CITRUS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Plant Layout

Pectin is a naturally occurring substance present in all plant tissue, calcium pectin being present between the cell walls and serving as a strengthening or building agent. Fruits naturally possessing relatively large amount of pectin include lemons, bitter oranges, apples, quinees, grooselevvies, currants and plums. It is less plentiful in fruits such as black berries, raspberries, strawberries and cherries. Pectin is a group of complex materials of very high molecular weight, which are able to form a gel in the presence of correct amounts of acidity and sugar. In the presence of fruit juice the gel will usually form when the concentration of sugar, acid and pectin are 68, 1 and 1 percent respectively. The pectin’s in fruits juices are derived from proto pectin, an insoluble form of polygalacturomides whose structure is still to be elucidated. The normal processes of ripening cause the dehydration of insoluble proto pectin into pectin’s (or pectinic acids) and associated polysaccharides, and many of the physical changes in the structure of fruit and vegetable tissues coinciding with ripening are due to these changes in the pectin constituents. The pectin eventually passes into a gelatinous condition slightly soluble in water. It is suggested that pectin fundamentally comprises long-chain polygalacturomide molecules with only minor hydrogen bonding between chains. High jelly grade pectin’s are those where minimum chain dehydration has taken place and about half of the glacturonic acid groups are condensed as methyl esters. Pectin acid is the completely demethylated product possessing no power of forming sugar acid gels as required in the preserving industry. Citrus pectin is usually sold in a finely powdered condition. Pectin is available commercially in both liquid and powdered form. It has generally been extracted from either apples or citrus fruits. Pectin’s are graded for the food industry. Grading is done according to sugar-carrying power. The field of uses and applications of pectin show that there is vast consumption scope of pectin. It is very widely used in food and food processing industries. These are important ingredient and basic raw material for a large number of food products. For example, it is used in preparation of jam, jelly, sauces, pickles, ice cream, confectionery, drinks and a number of various food products. The market potential can be analyzed on the basis of the growth prospects of its users industries. The food processing units have been mushrooming at a rapid pace. Apart from the indigenous consumption, there is a demand of pectin in export market. This industry may prove to be a good foreign exchange earner. The supply is always lagging far behind its production. Its demand is increasing tremendously and the major requirement is being fulfilled through import. There is a good scope to venture into this field for new entrepreneurs.
Plant capacity: 100500 Kg/AnnumPlant & machinery: 52 Lakhs
Working capital: -T.C.I: 232 Lakhs
Return: 45.00%Break even: 47.00%
Add to Inquiry Add to Inquiry Basket

GLUCOSE SALINE - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic

Dextrose is a carbohydrate caloric agent. Glucose, also known as dextrose, is a simple sugar that can be found in nature and are chemically identical. Dextrose is simply in lay terms sugar water and is generally used in those patients who have a very low blood glucose level or are unable to eat for some reason. It is a short term treatment generally. D5NS (Dextrose 5% in normal saline) is hypertonic, meaning it has a higher solute concentration than tissues, so it can be used to help draw fluids out of oedematous (fluid-swollen) tissues. Dextrose (glucose) 5% and normal saline (sodium chloride or common table salt 8.5 grams per 100 ml of distilled water), have the same tonicity or concentration of the rest of the body fluids, that is, they will do no harm to the rest of the fluids of the body whereas Saline or 9%NS IV solution is used as the universal fluid replacement in dehydrated individuals, it is the same composition as the body's normal fluid and most IV medications can safely be mixed with or push through saline. Dosage of dextrose depends on the age, weight, clinical condition, and fluid, electrolyte, and acid-base balance of the patient. Dextrose is readily metabolized; it increases blood glucose concentrations and provides calories. Dextrose may decrease body protein and nitrogen losses, promote glycogen deposition, and decrease or prevent ketosis if sufficient doses are given. Since dextrose is usually metabolized to carbon dioxide and water, administration of a solution of dextrose and water is equivalent to providing the same volume of free water. Following oral administration, dextrose, a monosaccharide, is rapidly absorbed from the small intestine principally by an active mechanism. In patients with hypoglycemia, increases in blood glucose concentration usually occur within 10–20 minutes and peak at about 40 minutes after oral administration of dextrose. In medicine, saline (also saline solution) is a general term referring to a sterile solution of sodium chloride (NaCl, more commonly known as salt) in water but is only sterile when it is to be placed intravenously; otherwise, a saline solution is a salt water solution. Thus, an intravenous infusion, a saline solution is typically mixed with dextrose or glucose to reduce any complications from infusing saline solution and to reduce the amount of sodium circulating through the blood stream. This works particularly well as a water and nutrient supplement to sustain hospitalized patients who are unable to eat or drink or who have suffered dehydration from severe vomiting or diarrhea. In present era, people are becoming very health conscious as the infection through air, water, food is prevailing across the country to the maximum. As hospitals are increasing day by day, doctors also prefer to use distilled water ampoules. There are several in organized and private sectors are engaged in the manufacturing of different grade dextrose saline solution. The demand growth is about 5% in each and every year. The entire demand gap is fulfilled by the domestic manufacturers. There is scope of dextrose saline bottle. New entrepreneur may launch in this field will be successful. Few Indian Major Players are as under: Gulshan Polyols Ltd. Kamala Sugar Mills Ltd. Origin Agrostar Ltd. Rai Agro Inds. Ltd. Sanjeevanee Pharmaceuticals Ltd. Santosh Starch Ltd. Sukhjit Starch & Chemicals Ltd. Unique Sugars Ltd. Universal Starch-Chem Allied Ltd.
Plant capacity: 3600 Thousand Bottles Each Bottles 500 ml/AnnumPlant & machinery: 66 Lakhs
Working capital: -T.C.I: Cost of Project : 153 Lakhs
Return: 42.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

INSTANT GINGER POWDER DRINK - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Ginger is one of the oldest and most important spices used in different kinds of food preparation. Ginger possesses a warm pungent taste and a pleasant odor, hence it has a wide use as a flavoring in numerous food preparation, beverages, ginger bread, soups, pickles and many soft drinks. There are two general types of ginger viz. fresh green ginger used for the preparation of candied ginger (in sugar syrup) and dried or cured ginger applied in the spice trade, for extracts, oleoresins and for the distillation of its volatile oil. The main application of the ginger oil is in confectionery, beverages, and baked products. An instant beverage powder with non-polymer catechins contained at high concentration has improved flavor and taste owing to reductions in bitterness and astringency, and also provides improved flavor and taste and improved stability in external appearance after reconstituted into a beverage. The instant beverage powder contains the following ingredients (A) and (B): (A) from 0.5 to 20.0 wt % of a purified product of green ginger extract powder. Instant Ginger Drink with Creamer made from fresh young roots, peeled and sliced, cooked in heavy sugar syrup, and then air dried. After the process, it mixed with creamer for taste variant. The instant ginger powder in the present is comprised of a powdery concentrate composition containing non-polymer catechins, and is taken as a reconstituted beverage by dissolving it in a liquid such as deionized water or hot water. The instant beverage powder of the present may desirably be taken as a reconstituted beverage containing from 0.01 to 0.5 wt % of non-polymer catechins. the content of non-polymer catechins in the instant beverage powder is set at from 0.5 to 15.0 wt % in the present invention, but may be set preferably at from 0.5 to 12.0 wt %, more preferably at from 0.6 to 10.0 wt %, even more preferably at from 0.6 to 5.0 wt %. The setting of the content of non-polymer catechins within the above-described range makes it possible to readily digest a large amount of non-polymer catechins, and moreover, to expect the physiological effects of non-polymer catechins. The term "non-polymer catechins" as used herein is a generic term, which collectively encompasses non-epi-form catechins such as catechin, gallocatechin, catechin gallate and gallocatechin gallate, and epi-form catechins such as epicatechin, epigallocatechin, epicatechin gallate and epigallocatechin gallate. The concentration of non-polymer catechins is defined based on the total amount of the above-described eight non-polymer catechins. The purified product is next granulated into a powder. The granulation may be conducted by either a dry method or a wet method, but for obtaining a particle size suited for dissolution in water or another drinking medium, wet granulation that granulates by using the adhesive force of water or a binder is preferred. Examples of preferred granulation methods include spray-drying granulation, freeze-drying granulation, fluidized bed granulation and tumbling granulation. The granulation can be conducted by using two or more of these granulation methods in combination. The instant drinks are available in a range of flavours: Orange, Raspberry, Cherry, Kiwi, Mango, Cola, Peach, Tropic, sprite, Apple, Apricot, Fruit Punch, Grape, Strawberry, Lemon, Pineapple, Ice tea Lemon, Ice tea Apple and Ice tea Peach. The demand of ginger based beverage will ever increasing due to its health benefits. It has good export, global and domestic demand. There is good scope for new entrepreneurs.
Plant capacity: 600 MT/Annum (5000 Pouches (400 GMS) per dayPlant & machinery: 50 Lakhs
Working capital: -T.C.I: 348 Lakhs
Return: 49.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

RUBBER SHEET - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Rubber is a collective term for macromolecular substances of natural or synthetic origin (natural rubber or synthetic rubber). Natural rubber (abbreviated to NR) primarily comprises polyisoprene and is harvested from the milky white latex of a number of species of plants which flourish in the tropics, above all from the Spurge family (Euphorbiaceae). The most of the rubber products that are used today is made from synthetic rubber as natural rubber has certain mechanical, chemical and environmental resistance limitations. So synthetic rubbers are formulated in a proper and are used to manufacture a wide range of rubber products. Rubber is a material which is used to produce different objects used for various applications. A popular and a widely demanded use of rubber form are sheets which are used for different purposes. Rubber sheets are available in various lengths and widths. These sheets are cut according to customer requirements. Various types of rubber are used to make sheets. These sheets are very popular and used in an extensive range application. There are a comprehensive range of rubber sheets for general, industrial and mining applications. These sheets are also available in vulcanized black as well as colored sheets for technical uses and industrial applications. There can also be smooth surfaced rubber sheets or with a canvas-type print on one or both sides of the rubber sheets. These sheets insertions are usually designed for use in applications where stresses are generally static and pressures are low. There can be cloth insertion, metal mesh insertion, gauze, nylon cloth, and copper insertion. Moulding is an operation of shaping and vulcanizing the rubber compound by mass of heat and pressure, in mould of appropriate form. The goods thus produced are known as moulded goods. These moulded goods are used in day to day life in household electrical, surgical and automotive and other applications several thousands of types of moulded goods are being produced. There are many types of rubber sheets produced and are available in markets. They are neoprene rubber sheet, nitrile rubber sheet, EPDM rubber sheet, natural rubber sheet, hypalon rubber sheet, viton rubber sheet, silicone rubber sheet, SBR rubber sheet, etc. Global demand for industrial rubber products is estimated to rise to 4.3% annually through 2013 to $97.8 billion. Market advances in developing areas will further increase due to healthy economic growth, rising personal income levels, ongoing industrialization efforts and also due to growth in manufacturing output and fixed investment expenditures. The industrial equipment market, which includes industrial machinery and equipment, off-road vehicles, will continue to hold the largest share of aggregate demand in 2013. India’s production varies between 6 and 7 lakh tons annually which amounts to Rs. 3000 crores. Seventy percent of the total rubber production in India is in the form of Ribbed Smoked Sheets (RSS). This is also imported by India accounting for 45% of the total import of rubber. The Indian rubber industry has a turnover of Rs 12000 crores. Most of the rubber production is consumed by the tyre industry which is almost 52% of the total production of India. Among the states, Kerala is the leading consumer of rubber, followed by Punjab and Maharashtra. Though, India is one of the leading producers of rubber but it still imports rubber from other countries. At present, India is importing around 50000 tons of rubber annually. There is a very good scope in this field. New Entrepreneurs venturing in this field will find immense market potential. Few Indian Major Players are as under: Andaman & Nicobar Islands Forest & Plant. Devp. Corpn. Ltd. Cosmos India Rubber Works Ltd. Enkay (India) Rubber Co. Pvt. Ltd. Hariharaputhra Plantations Ltd. Kerala Cardamom Processing & Mktg. Co. Ltd. Pololight Industries Ltd. Rehabilitation Plantations Ltd. Rubber Products International (India) Ltd. Rubber Products Ltd. Vaniampara Rubber Co. Ltd.
Plant capacity: 600 MT/AnnumPlant & machinery: 73 Lakhs
Working capital: -T.C.I: 238 Lakhs
Return: 40.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

POULTRY FARMING - Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Plant Layout

Poultry farming has occupied an important place in the Indian economy. With the fast food culture an accepted feature, poultry farming is playing a greater role in the eatery business in India. It has emerged as the fastest growing segment in the agri livestock industry. Emergence of poultry as a large scale commercial enterprise took place less than 35 years ago. Poultry industry is producing a large quantity of eggs and nutritious meat for the second largest demography in the world of Indian subcontinent. It is making all efforts to develop the overseas market. The growing poultry industry in recent years has been adopted as a subsidiary or a main occupation which means promotion of economic up gradation. Poultry was a desi birds rearing industry in early fifties. Poultry farming was greatly helped in the economic and employment upliftment of our rural population. We may hope that by the end of century, poultry farming will be recognized as one of the most significant means of eradicating rural poverty and malnutrition. With greater awareness among consumers regarding meat quality, the demand of chicken meat will be much higher than the production. One advantage in rearing poultry is the fact that a small area of land suffices whereas much larger area would be needed for any other livestock enterprise. Marketing of poultry products usually poses no protein rich eggs and poultry meat is continuously on increase near urban areas. There are government and other financial and technical inputs to enthusiastic investors to undertake poultry farming as a vocation. Today, layer units of 100,000 birds and above under the cage system is common. India produces 40,000 million eggs and 1200 million broilers annually. More than 100,000 poultry farms of varying size ranging from few birds exist in rural and tribal areas of the country. There are about 123,000 poultry farmers in India. The value of output from the poultry sector is nearly Rs 330 billion. India has emerged as the fourth largest producer of eggs and ninth largest producer of poultry meat in the world. Andhra Pradesh, Maharashtra, Haryana and Tamil Nadu are the major egg producing states. These states accounted for more than 50 per cent of the eggs produced in the country. There is a very good scope in this sector to venture. Few Indian Major Players are as under: Agritech Hatcheries & Foods Ltd. Agrocorpex India Ltd. Arambagh Hatcheries Ltd. Arora Poultry Products Ltd. Bangalore Fort Farms Ltd. Baramati Agro Ltd. C & M Farming Ltd. Jagat Agriculture & Forest Ltd. Kalanjium Thozhilagam Pvt. Ltd. Paika Farmtech Ltd. S K M Animal Feeds & Foods (India) Ltd. Srinivasa Hatcheries Ltd. Suguna Poultry Farm Ltd. Super Farm Products Ltd. Venco Research & Breeding Farm Pvt. Ltd. Venkateshwara Hatcheries Pvt. Ltd. Venkateshwara Research & Breeding Farm Pvt. Ltd.
Plant capacity: 100000 Birds/Annum, 150000 Eggs/Annum (Poultry Farming)Plant & machinery: 8 Lakhs
Working capital: -T.C.I: 56 Lakhs
Return: 42.00%Break even: 47.00%
Add to Inquiry Add to Inquiry Basket

Rice Bran Based Solvent Extraction Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Rice has been and continues to be the largest source of human nutrition. Rice bran is a by-product of the rice milling process. Rice bran is the most important source of edible oil among the unconventional sources. Rice bran is the brown coating around the white starchy rice kernel, which is obtained by dehusking paddy and polishing the rice. While white rice holds little nutritional value, the bran that is removed contains 65 percent of the rice kernel’s nutrients and boasts a bounty of healthful benefits. The thin brown layer that is milled off in the processing of white rice, rice bran is just as effective as the other bran’s in fighting high cholesterol and providing high-grade fiber. India produces about 80 million tonnes of paddy annually. This can yield about 5 million tonnes of rice bran and to the extent of 8 lakhs tonnes of rice bran oil. Production of rice bran oil is currently estimated at about 2 lakhs tonnes and hardly 10-15 per cent of it is of edible grade, although the potential availability is reckoned at about 8 lakhs tonnes. The wide gap between the actual production and the potential availability of rice bran oil is primarily due to the fact that at present around 70 per cent of the paddy produced in the country is processed through huller mills while only 30 percent is processed by modern sheller mills. It has been estimated that huller mills number about 80,000 while there are only 28,000 modern sheller mills. Rice bran oil is natural oil that is created using the hull or bran of the rice grain. One of the advantages of using rice bran oil in cooking is that the oil has a high smoking point. This means the oil is ideal for frying foods without running the risk of overheating and burning the food before the meat or coated vegetables are cooked all the way through. The creation of rice bran oil involves the pressing of the hull or bran of the rice grain. By pressing on the hull, small amounts of oil can be extracted and collected. The oil released from the rice bran contains a hefty amount of Vitamin E, gamma oryzanol and the essential fatty acids that lend a great deal of taste to the oil. The presence of a number of antioxidants also help to make rice bran oil a healthier alternative for use in salad dressings and as an ingredient in baked goods. Rice Bran Oil alone has the potentiality of wiping out a large part of the deficit oil in the country. India is the biggest producer of rice in the world, next to China. However only a very small proportion of the rice bran is processed and large quantity of oil in rice bran is wasted. According to the solvent Extractor's Association of India, the total production of oil from indigenous sources amounted to 76.2 lakhs tonnes in oil year 2003-2004 and in the current oil year this is expected to rise to around 80.6 lakhs tonnes. The government estimated that the total shortfall in supply was of the order of about 6 lakhs to 7 lakhs tonnes. However, it imported about 11 lakhs tonnes last year, which is expected to go up to about 15 lakhs tonnes in the current year. The government is importing just the double of its own stated shortfall. There is an ample of scope and space for new entrepreneurs to venture into this field. Few Indian Major Players are as under: A G Fats Ltd. Agrawal Oil Extractions Ltd. Balaji Agro Oils Ltd. Boppana Oils Ltd. Cethar Foodoil Ltd. Chaitanya Oils Ltd. Goa Agro Oil Ltd. Godavari Edible Bran Oil Ltd. J R Foods Ltd. J S P Oils & Fats Ltd. K G N Agro Internationals Ltd. Kedia Overseas Ltd. Kirti Dal Mills Ltd. Lakshmi Energy & Foods Ltd. Madras Vanaspati Ltd. Midland Industries Ltd. Modi Naturals Ltd. Morinda Overseas Inds. Ltd. Organic Chemoils Ltd. Patliputra Industries Ltd. Prakash Solvent Extractions Ltd. Raghunath Cotton & Oil Products Ltd. Rasoi Ltd. Ravindra Solvent Oils Ltd. Rice Oil & Foods Ltd. Rom Industries Ltd. S K M Animal Feeds & Foods (India) Ltd. Sambandam Solvent Extraction Ltd. Satyakala Agro Oil Products Ltd. Shanti Kunj Solvent Ltd. Shree Madhav Edible Products Ltd. Shree Shakthi Agro Oils Ltd. Siddaganga Oil Extractions Pvt. Ltd. Sidh Industries Ltd. Sonitpur Solvex Ltd. Sree Tulasi Solvent Extractions Ltd. Sri Murugarajendra Oil Industry Ltd. Srihitha Refineries Ltd. Thapar Agro Mills Ltd. Unique Organics Ltd. Vijay Agro Products Pvt. Ltd.
Plant capacity: 8100 MT/AnnumPlant & machinery: 486 Lakhs
Working capital: -T.C.I: Cost of Project : 804 Lakhs
Return: 42.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

DISPOSABLE PLASTIC SYRINGES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Disposable plastic syringes are a great innovation in the field of medical equipment. Disposable needle is widely used by doctors for injection purpose with the help of syringes. A disposable plastic syringe is one of the fastest ways to administer life saving drugs and vaccinations to a patient. The major advantage of using disposable syringes is that no infection is transmitted since the injection is disposed off immediately after use. With the increase in population in our country, requirement of medicine and injections have increased. For more strength of people more number of needles is required with syringes. Tablets or capsules also play a great role in the life of human beings but injections are also a must to some extent. The disposable syringes market has now self-destructing or auto-disable (AD) syringe as a safe bet against re-use and spread of HIV, hepatitis and other infections. The national immunization policy has adopted the non-reusable, self-breaking syringes, though many States are yet to follow suit for the curative injections. Disposable surgical caps and mask are used considerably while performing an operation or undergoing surgical measures. Catheters are used for the purpose of passing urine for bed-ridden and emergency patients in hospitals, nursing homes etc. With the development of pharmaceutical industries the use of syringes and disposable needles will also develop. About 70% pharmaceutical industries are in small-scale sector. Disposable syringes are becoming more popular in the medical world due to its lower cost and higher accuracy. Plastic can be used in place of metal without any problem. The procedure is also relatively easy and cheaper. New comer can well venture into this field. There is a good scope in this sector. Few Indian Major Players are as under: Albert David Ltd. Disposable Medi-Aids Ltd. H L L Lifecare Ltd. Hindustan Syringes & Medical Devices Ltd. Iscon Surgicals Ltd. La Medical Devices Ltd. Lifeline Injects Ltd. Lifelong Meditech Ltd. Nirma Ltd. Raaj Medisafe India Ltd. Sangam Health Care Products Ltd. Surgiplast Ltd. Transmedica (India) Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 41.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 64 of 216 | Total 2155 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 64 215 216   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top