REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Tripura- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Tripura is a state in Northeast India. The third-smallest state in the country, it covers 10,491 km2 (4,051 sq mi) and is bordered by Bangladesh (East Bengal) to the north, south, and west, and the Indian states of Assam and Mizoram to the east. Tripura is a landlocked state in North East India. The state has a tropical savanna climate, designated Aw under the Köppen climate classification. The undulating topography leads to local variations, particularly in the hill ranges. The four main seasons are winter, from December to February; pre-monsoon or summer, from March to April; monsoon, from May to September; and post-monsoon, from October to November.

Tripura's gross state domestic product for 2010–11 was 129.47 billion (US$2.1 billion) at constant price (2004–05), recording 5.71 per cent growth over the previous year. In the same period, the GDP of India was 48778.42 billion (US$790 billion), with a growth rate of 8.55 per cent. Tripura is an agrarian state with more than half of the population dependent on agriculture and allied activities. However, due to hilly terrain and forest cover, only 27 per cent of the land is available for cultivation. Rice, the major crop of the state, is cultivated in 91 per cent of the cropped area.

TOURISM

Tripura has a geographical area of about 10,492 sq. km. almost two-thirds of the state is under hilly terrain and it is surrounded on three sides by the deltaic basin of Bangladesh. The Tripura tribal’s are divided into two groups: Puran Tripuras and Natun Tripuras. The Puran Tripuras are the original inhabitants of the State and constitute a little over 16% of the total and 57% of the tribal population of the State. The Department of Tourism, Govt. of India, under the ministry of Tourism and Culture has been providing liberal financial and technical support for the tourism development in the state based on the projects received from the states. It is quite clear that Tripura has tremendous and quite unique tourism potential. This could be tapped mainly through the concept of Eco-tourism and Heritage tourism. Nature / wildlife tourism, adventure tourism, rural tourism, leisure tourism, pilgrimage tourism, international border tourism could be some special tourist packages. The Tourism Development in the Northeast region will depend on integrated approach, involving various government departments, private entrepreneurs, voluntary organizations and local community. This approach will also help in evolving local people’s perception towards tourism development as a strong tool for socio-economic up liftment.

INDUSTRIAL SECTOR

The State Government offers a package of incentives for setting up of industrial units, which is comparable to other states. Besides, the special incentive package i.e. North East Industrial and Investment Promotion Policy (NEIIP) declared by the Government of India for the North East Region is available to industrial units.

State Package of Incentives under Tripura Industrial Investment Promotion Incentive Scheme-

•                    Capital Investment Subsidy @ 30% and additional subsidy @ 2.5% for enterprises of ST, SC, & women individuals on Fixed Capital Investment.

•                    Full Reimbursement of Standard Certification Fees /Charges / other expenses on account of obtaining a standard Certification.

•                    Provides State Transport Subsidy for covering the portion for which Central Transport Subsidy is not available

•                    85% Exemption from the payment of Earnest Money and Security Deposits on tenders floated by State Govt. Department / Agencies.

Incentives declared by Central Government:

•                    Exemption of Excise Duty on finished products.

•                    Central Transport Subsidy.

•                    Income Tax Benefit.

•                    Capital Investment Subsidy.

•                    Comprehensive Insurance Scheme for insurance coverage. Subsidies to service sector, bio-technology and power generating industries.

INVESTMENT OPPORTUNITIES

Tripura offers an investor-friendly environment. The Government welcomes investments into the State, from both domestic and foreign investors.

•        Natural gas

Tripura has vast reserves of natural gas in non-associate form. The gas is of high quality, with high methane content of up to 97%. The availability of superior quality natural gas, at concessional price, offers a great opportunity to prospective investors, to set up gas-based industrial units, using natural gas

•        Information Technology (IT)

Tripura has been considered the second best IT destination in the North East. IT sector (including IT-enabled services) has been identified as one of the major potential growth sectors by the state. The high literacy rate of the State provides additional advantage for development of the sector.

•        Food Processing

The State government has identified food processing as a major thrust area. There is a vast potential for setting up of food processing units in the State. The agro-climatic conditions in Tripura are ideally suited for production of a large variety of horticultural crops.

•        Handicrafts

From time immemorial, Tripura has carved out a name for itself in the field of handicrafts. The gifted artisans produce wonderful objects of crafts from simple material like cane, bamboo and wood.

•        Tourism

Tripura is an attractive tourist destination. The state has a rich cultural heritage. There are number of historical Hindu and Buddhist sites.


INDUSTRIAL POLICY

•        To improve Basic as well Industrial Infrastructure.

•        Industrial Growth by attracting Private Investment.

•        To improve investment climate towards better regulation by removing barriers to competition.

•        Creation of hassle-free and congenial investment climate.

•        To bring significant increase in the State Domestic Product.

•        Widening of resources base of the state.

•        Development of connectivity (Internal road, railways and air & telecom).

•        Better social infrastructure Enabling Entrepreneurship -building capacities through entrepreneurial and technical skills, training and promotion of self-employment.

 THRUST AREAS

•        Natural Gas

•        Food Processing

•        Rubber

•        Tea

•        Handicraft

•        Bamboo

•        Handloom

•        Tourism

•        Information Technology

•        Education

  •           Healthcare

The Department of Industries & Commerce was established to promote Village and Small-scale industries as well as medium and large scale industries in the State. While efforts are being made to promote entrepreneurship within the State, the outside investors in the public and private sectors are also encouraged both for their financial capabilities and technical expertise, for the medium and large-scale units. The major existing industrial area is the Industrial Growth Centre Complex at Bodhjungnagar which also includes Food Park, Rubber Park and Export Promotion Industrial Park. The other industrial sites near Agartala as the main business and industrial centres are Dukli, Arundhatinagar and Badharghat. The mineral resources are minor amounts of glass sands, limestone, plastic clay and hard rock and all of these materials are being used in varying degrees. Setting up of ceramic tiles unit and other mineral based industries are being encouraged in the private sector.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 24 of 254 | Total 2538 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 24 253 254   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

HDPE / PP Woven Fabric From Tape Line using Circular Looms and Sacks Making with Lamination of BOPP/ BOPET/ LDPE and Printing - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey

Woven is a method by many threads or tapes woven in two directions (warp and weft), to form a fabric for plastic industry needs. Polypropylene, which is also known as PP for short name, is one kind of thermoplastic resin material that produced by the polymerization of propylene. Because of its non toxic, non-staining 100% reusable and durable it is widely used. The polypropylene woven fabric (PP Woven Fabric) provide strong, dependable and economical packaging option for diverse industries across the globe. These fabrics are light in weight and ideally suited for packaging corrugated or wooden boxes, cloth bales, machinery and many other finished goods for complete protection. They are used in making of bags,sacks ,Packing for Textiles, Upholstery, Carpets ,Making Tarpaulin Covers,Open Air Storage . Flexible Intermediate Bulk Containers (FIBC's): The FIBC is a large bag made of woven polypropylene (PP) fabric that is usually extrusion coated to provide additional barrier and leak-proofness. They are cheaper in cost and offer better packaging properties, high resistance towards moisture and insects. There are a little over 30 Indian manufacturers and the present output of the Indian FIBC industry is estimated to be about 125,000 MT per year valued at some Rs. 1,350 crores. The maximum growth potential is seen in the FIBC, woven sacks exports, leno bags & wrapping fabric. Thus, as an entrepreneur this project offers an exciting opportunity to you.
Plant capacity: HDPE/PP Woven Fabric: 7.2MT/day HDPE/PP Woven Bags for fertilizer: 102857 Nos/dayPlant & machinery: Rs 1507 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 2536 Lakhs
Return: 21.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Vacuum Fried Vegetable Chips (Sweet Potato, Beans and Beetroot)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

India is one of the largest producers of potato. Besides being used as a daily food item in various vegetable preparations, potato today increasingly finds use in the form of chips or wafers as snacks food. The potato chips and wafers are popular processed food items that give considerable value addition to potatoes. Mixed Vegetable Chips (Sweet Potato, Pumpkin, Carrot, Taro and Green Beans),mixed fruit chips and beet root chips are processed by a vacuum frying method, the latest technology using the carefully selected raw materials from the best growing regions. The basic chips are cooked and salted, and additional varieties are manufactured using various flavorings and ingredients including seasoning, herbs, spices, cheeses, and artificial additives. Chips are a predominant part of the snack food market in English speaking countries and numerous other Western and Asian nations. Vegetables chips and fruit chips are 100% natural, Low fat, high nutrient, no preservative. India's potato production has seen a phenomenal increase since the 1950s, mainly due to strong demand from the processing industry and remunerative returns. It is grown all over the country with Uttar Pradesh growing the maximum quantity. The overall size of the snack food market is estimated at Rs. 45 to Rs. 50 bn. The market is reported to be growing at 7 to 8 % annually. In India it is being produced not only on large scale by big firms, but also on cottage/home scale in semi-urban and rural areas. Owing to this, there is a number of companies from both the organized as well as unorganized sector who are already catering to the needs of tea stalls, restaurants, railway stations, tourist places etc. Still there is a huge demand to be met for these products in interior and remote places in different parts of the country. As a whole there is a good scope for new entrepreneur with manufacturing of good quality of product.
Plant capacity: Sweet potato: 120 kg/day Beat root: 80 kg/day Beans chips: 266 kg/dayPlant & machinery: Rs 83 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 209 Lakhs
Return: 26.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

Khaini, Zarda & Gutka - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Tobacco is an important commercial crop cultivated in an area of 0.4 million ha producing annually around 700 million kg of cured leaf out of which 260 M kg is Flue-Cured Virginia tobacco (cigarette type). India is the 3rd largest producer of tobacco in the world after China and Brazil. Flue-Cured Virginia (FCV), Bidi, Hookah and Chewing, Cigar filler, Cigar Wrapper, Cheroot, Burley, Oriental, HDBRG, Lanka etc., are the different types of tobacco grown in the country. India ranks 5th largest exporter of tobacco in the world after Brazil, USA, Malawi and Turkey. Gutka is the refined tobacco with catechu, chuna, flavouring agents and perfumery compounds etc. It is now-a-days a very common mouth freshener. Zarda is a mixture of tobacco, lime, spices, and occasionally, silver flakes is also added to pan and chewed. Khaini is not only the cured leaves of tobacco in granular form but it contains toxic, hovouring and soothing antiseptic ingredients which makes the man fresh and free from sullenness laziness. The tobacco industry is one of the most profitable industries in the world. All types of chewing tobacco is used as chewing material by the people which generates some sensation and makes the people fresh and recovering from tiresome. Due to its intoxicant constituent nicotine it serves the purpose of germicide for teeth and so people use it for saving their teeth from various dental diseases. India Tobacco market is expected to reach USD 35 billion by FY’ 2018. Chewing tobacco has been a tradition in India for centuries. Of the total amount of tobacco produced in the country, around 48% is in the form of chewing tobacco, 38% as bidis, and only 14% as cigarettes. Thus, bidis, snuff and chewing tobacco (such as gutka, khaini and zarda) form the bulk (86%) of India’s total tobacco production. In the rest of the world, production of cigarettes is 90% of total production of tobacco related products. The developing countries are expected to further increase their share in world tobacco production, according to the report. Any entrepreneur venture into this field will be successful.
Plant capacity: Khaini: 500 kg/day, Zarda: 500 kg/day, Gutka: 500kg/dayPlant & machinery: Rs 51 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 318 Lakhs
Return: 31.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Autoclaved Aerated Concrete Blocks (AAC Blocks)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Autoclaved Aerated Concrete (AAC) is a non-combustible, lime-based, cementitious building material that is expanding into new worldwide markets. . In our country aerated techniques have been developed for about 40 years, and its technique skills and equipments are becoming mature. The AAC has the features of light bulk density, good thermal insulation properties and sound-absorption, certain strength and process ability, and its raw materials is very rich, especially the reuse of fly ash enables the comprehensive utilization of industrial residue, curbs environmental pollution, no destroy on farmland, create good social and economic benefits. AAC is an ideal alternative of the traditional clay brick wall materials. This is a light- weight building material produced by autoclaving a set mix of fine siliceous materials such as ground sand or fly ash and a binder like Portland cement or lime. AAC products are equally suitable for residential construction, multistory buildings, commercial, and industrial construction. The autoclaved aerated concrete sector of the construction industry is now in the phase of a tremendous growth cycle. AAC Reduces Additional Material Use and Minimizes Waste and Pollution. The main benefits of autoclaved aerated concrete over other cladding materials are its good strength-to-weight ratio, its mobility and, because it is a non-combustible material, its fire performance. There will be phenomenal growth in autoclaved aerated industry in the near future. It is estimated that by 2025 about 66 per cent of the world population will live in urban areas on 7 per cent of the land, which means that urbanization will be on a small portion of land. This will need taller buildings and use of high strength concrete.
Plant capacity: AAC Blocks: 500 Cu.Mtr./dayPlant & machinery: Rs 601 Lakhs
Working capital: -T.C.I: Cost of project: Rs 1415 Lakhs
Return: 25.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Foil - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic

Aluminium plays a major role in the modern world through its innumerable forms of applications- from kitchen ware to electric conductors and from railway wagon to Appollo spacecraft. Because of its intrinsic and versatile properties of lightness, strength to weight ratio, corrosion resistance, electrical and thermal conductivity, non toxicity etc., a wide range of uses has opened up for this metal. Aluminium as a packaging material is unmatched owing to its light weight, hygienic and non-contamination which eventually results in longer shelf-life of end products. Aluminium foil is a thin sheet of metal. As such it can be an absolute barrier to moisture, gases, odors, bacteria and moulds. The high reflectivity of aluminium ensures good protection against radiant heat, whilst its opacity is important in preventing deterioration of a very large range of foods and drinks which are affected by light. It is used for packaging and non packaging uses. The growth of this industry has been in the recent past, owing to the growing application of foil in a variety of products. India is one of the key producers of aluminium foil in the region. Over 70% of aluminium foil used in India is for packaging applications. Pharmaceuticals followed by beverages, personal care and a wide range of food and non-food products, semi rigid containers and house foil are the principal applications of aluminium foil in India in the packaging sector. Indai is the biggest aluminium foil manufacturer in the country. Other major manufacturers include India Foils, Emco, PG Foils and Flex Art. Holding on to the emerging indicators and the future prospects, Hindalco has plans to increase its aluminum smelting capacity three-fold to 1.8 mn tonne and alumina refining capacity four-fold to 6 mn tonne annually. As a whole it is a good project for new entrepreneurs to invest.
Plant capacity: 6 MT/DayPlant & machinery: Rs 58 Lakhs
Working capital: -T.C.I: Cost of project: Rs 312 Lakhs
Return: 28.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

MEDIUM DENSITY FIBERBOARD- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Fiberboard is a type of engineered wood product that is made out of wood fibers. Types of fiberboard (in order of increasing density) include particle board, medium-density fiberboard, and hardboard. Fiberboard, particularly medium-density fiberboard (MDF), is heavily used in the furniture industry. Fiberboard is also used in the auto industry to create free-form shapes such as dashboards, rear parcel shelves, and inner door shells. Fiberboard has many benefits and is used in residential and commercial construction. Different uses and applications include: sound proofing/deadening,structural sheathing,low-slope roofing, and Sound deadening flooring underlayment.MDF is generally cheaper than plywood. MDF does not contain knots or rings, making it more uniform than natural woods during cutting and in service.However, MDF is not entirely isotropic, since the fibres are pressed tightly together through the sheet. Typical MDF has a hard, flat, smooth surface that makes it ideal for veneering, as there is no underlying grain to telegraph through the thin veneer as with plywood. A so-called "Premium" MDF is available that features more uniform density throughout the thickness of the panel. MDF may be glued, doweled or laminated. Typical fasteners are T-nuts and pan-head machine screws. Smooth-shank nails do not hold well, and neither do fine-pitch screws, especially in the edge. Special screws are available with a coarse thread pitch, but sheet-metal screws also work well. Like natural wood, MDF may split when woodscrews are installed without pilot holes. Indian particle board and plywood industry dates back to the First World War. It has come a long way having grown nearly six-fold since its inception. The large producers account for 15% of the total production, producing some 38 mnsqm of plywood and blockboards.There are several SSI units and other informal sector units contributing around 60% of the total production. The Indian market for particle board and plywood is estimated in value terms, at over Rs. 37 bn. Of the total market, particle board including medium density fiberboard (MDF) accounts for nearly a quarter of the market. Nearly 85% of the particle board is supplied by the organized sector. Western India has emerged as the leader in the particle board segment. India organized furniture industry is estimated at around USD 8 bn and expected to grow at a CAGR of over 25% annually. As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Bajaj Eco-Tec Products Ltd. • Best Board Ltd. • Century Plyboards (India) Ltd. • Greenply Industries Ltd. • Mangalam Timber Products Ltd. • Nuchem Ltd. • Shirdi Industries Ltd.
Plant capacity: 400CBM/dayPlant & machinery: 6866 lakhs
Working capital: -T.C.I: Cost of Project: 9559 lakhs
Return: 27.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

Particle Board (Wood Base)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Particle Boards are a relatively new type of engineered wood product.It is cheaper, denser and more uniform than conventional wood and plywood. The main advantage of particle board over solid wood or plywood is that its cost is very low. Compared to plywood furniture of similar dimensions, particle board furniture costs less than half. Particle boards are machine manufactured to desired dimensions, and thus standard pieces of furniture can be mass-produced using these boards. This further brings down the costs since there is no carpenter work involved. This also means ready-to-buy products for customers with zero waiting time. Particle boards are very light in weight, and hence furniture made from these boards is relatively easy to transport and move around. However, particleboard can be made more attractive by painting or the use of wood veneers onto surfaces that will be visible. The resin bonded fibre and particle board industry is of recent origin in India. A number of project proposals have been approved for setting up particle board and MDF board units. The additional approved capacity for particle board is 282,500 TPA and for MDF is 350,000 TPA. There are no proposals for setting up additional hard board and insulation board manufacturing units. The production of hard board and insulation board has been stagnant during the period 1975 to 1990. Particle board registered a growth of 51.5% whereas production of MDF increased by 128% in the same period. Particle board manufacturing technology based on wood and wood wastes is well absorbed in the country. Most of the existing plants have developed the necessary expertise to utilise conventional wood species for production of particle board. However, major items of plant and machinery are being imported for plants of capacities higher than 20 TPD. Indigenisation to the extent of 20-25% has been achieved for the latest plants being set up. So far the sporadic individual efforts by the industry have been inadequate to create sufficient demand growth. As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Archidply Industries Ltd. • Associate Decor Ltd. • Bajaj Eco-Tec Products Ltd. • Bajaj Hindusthan Sugar Ltd. • DarshanBoardlam Ltd. • Ecoboard Industries Ltd. • Genus Paper Products Ltd. • Jolly Board Ltd. • Kitply Industries Ltd. • Madras Chipboard Ltd. • Novopan Industries Ltd. • Nuboard Manufacturing Co. Ltd. • Oriental Veneer Products Ltd. • Rushil Decor Ltd. • Shirdi Industries Ltd. • Western India Plywoods Ltd.
Plant capacity: 600Nos/dayPlant & machinery: 452 lakhs
Working capital: -T.C.I: Cost of Project: 1066 lakhs
Return: 25.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Medium Density Fiberboard (MDF)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Medium-density fibreboard (MDF) is an engineered wood product made by breaking down hardwood or softwood residuals into woodfibres, often in a defibrator, combining it with wax and a resin binder, and forming panels by applying high temperature and pressure.MDF is generally denser than plywood. It is made up of separated fibres, but can be used as a building material similar in application to plywood. It is stronger and much denser than particle board. It can be finished to a smooth surface and grain printed, eliminating the need for veneers and laminates. Most of the thicker MDF panels (1.27 to 1.91 centimeters [cm]) (1/2 to 3/4 inch [in.]) are used as core material in furniture panels. Medium density fiberboard panels thinner than 1.27 cm (1/2 in.) typically are used for siding. MDF does not contain knots or rings, making it more uniform than natural woods during cutting and in service. However, MDF is not entirely isotropic, since the fibres are pressed tightly together through the sheet. Typical MDF has a hard, flat, smooth surface that makes it ideal for veneering, as there is no underlying grain to telegraph through the thin veneer as with plywood. A so-called "Premium" MDF is available that features more uniform density throughout the thickness of the panel. MDF may be glued, doweled or laminated. Typical fasteners are T-nuts and pan-head machine screws. Smooth-shank nails do not hold well, and neither do fine-pitch screws, especially in the edge. Special screws are available with a coarse thread pitch, but sheet-metal screws also work well. Like natural wood, MDF may split when woodscrews are installed without pilot holes. Indian particle board and plywood industry dates back to the First World War. It has come a long way having grown nearly six-fold since its inception. The large producers account for 15% of the total production, producing some 38 mnsqm of plywood and block boards.There are several SSI units and other informal sector units contributing around 60% of the total production. The Indian market for particle board and plywood is estimated in value terms, at over Rs. 37 bn. Of the total market, particle board including medium density fibreboard (MDF board) accounts for nearly a quarter of the market. Nearly 85% of the particle board is supplied by the organized sector. Western India has emerged as the leader in the particle board segment. India organized furniture industry is estimated at around USD 8 bn and expected to grow at a CAGR of over 25% annually. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Bajaj Eco-Tec Products Ltd. • Best Board Ltd. • Century Plyboards (India) Ltd. • Greenply Industries Ltd. • Mangalam Timber Products Ltd. • Nuchem Ltd. • Shirdi Industries Ltd.
Plant capacity: 300CBM/dayPlant & machinery: 3511 lakhs
Working capital: -T.C.I: Cost of Project : 6613 lakhs
Return: 27.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

High Tensile Wire Used in Prestressed Concrete Poles and Railway Sleepers - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

High tensile wires are those which can withstand great strain without breaking or becoming deformed. High tensile wire is made with higher carbon steel. The increased carbon content increases the wire’s strength and elongation. As the carbon percentage content rises, steel has the ability to become harder and stronger through heat treating; however, it becomes less ductile. Regardless of the heat treatment, a higher carbon content reduces weldability. In carbon steels wire, the higher carbon content lowers the melting point. It has high strength, adequate ductility, Bendability, which is required at the harping points and near the anchorage, low relaxation to reduce losses and minimum corrosion. High tensile wire for pre-stresses in concrete structure by virtue of improved proportional limit, higher ductility combines with higher strengths. High Tensile Wires are used in Pre-stressed Concrete Industry, large bridges, Flyovers, Ports and Road Dividers. High tensile wire improves the bond strength between pre-stressed steel wire and concrete. Reduces the frictional losses between pre-stressed wire and concrete and increases the anchorage efficiency. Under the dispensations of the government's Industrial Policy of the post-liberalisation era, four steps changed the direction of the steel industry in India. These were (i) freedom to set up integrated steel plants in the private sector; (ii) placing imports of steel under OGL (open general licence); (iii) reduction of import duties on both steel and scrap; and (iv) decontrol of domestic prices. As a result, India has come to enjoy a cost advantage compared to most countries. The domestic demand is based on the per capita consumption in the urban sector increasing from 77 kg to 165 kg in 2019-20 at an annual growth of 5%. As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Aditya Ispat Ltd. • Bedmutha Industries Ltd. • Bindawala Cables & Conductors Ltd. • Calcast Ferrous Ltd. • D & H India Ltd. • Himachal Tubes & Wires Ltd. • Radiant Wires Ltd. • Rakan Steels Ltd. • S K M Steels Ltd. • Sail Bansal Service Centre Ltd. • Utkarsh Tubes & Pipes Ltd. • VandanaUdyog Ltd.
Plant capacity: 60 MT/dayPlant & machinery: 224 lakhs
Working capital: -T.C.I: Cost of Project : 958 lakhs
Return: 27.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Helmet Manufacturing - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A helmet is a form of protective gear worn to protect the head from injuries. The primary goal of a motorcycle helmet is motorcycle safety-to protect the rider's head during impact, thus preventing or reducing head injury and saving the rider's life. Some helmets provide additional conveniences, such as ventilation, face shields, ear protection, intercom etc. All helmets attempt to protect the user's head by absorbing mechanical energy and protecting against penetration. Their structure and protective capacity are altered in high-energy impacts. Beside their energy-absorption capability, their volume and weight are also important issues, since higher volume and weight increase the injury risk for the user's head and neck. Anatomical helmets adapted to the inner head structure were invented by neurosurgeons at the end of the 20th century. It is estimated that, worldwide each year, 1.24 million deaths and 20 to 50 million injuries are caused by road traffic crashes. The past two decades have seen a complete transformation of motorcycles industry worldwide with demand often beating the market’s expectation. The estimated demand for helmets is around 90 millions pieces per annum while the total capacity of ISI helmets is not more than 10 million pieces. Premium motorcycles helmet are witnessing strong demand, supported by growing preference for luxury motorcycle brands and rise in the number of fashion conscious riders with high disposal incomes.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Aerostar Helmets Ltd. • M S A (India) Ltd. • Mallcom (India) Ltd. • Steelbird Hi Tech (I) Ltd. • Titan Company Ltd.
Plant capacity: 500 Nos/dayPlant & machinery: 57 lakhs
Working capital: -T.C.I: Cost of Project: 326 lakhs
Return: 28.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 24 of 254 | Total 2538 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 24 253 254   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top