REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Telangana- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Telangana is a state in the Southern region of India. It has an area of 114,840 km2 and is the twelfth largest state in India. Most of it was part of the princely state of Hyderabad, ruled by the Nizam of Hyderabad during the British Raj, joining the Union of India in 1948. Telangana was separated from Andhra Pradesh as a new 29th state of India, with the city of Hyderabad as its capital. Hyderabad will continue to serve as the joint capital city for Andhra Pradesh and Telangana for a period of not more than ten years. Telangana is situated on the Deccan Plateau, in the central stretch of the eastern seaboard of the Indian Peninsula. It covers 114,800 square kilometers (44,300 sq. mi). The region is drained by two major rivers, with about 79% of the Godavari River catchment area and about 69% of the Krishna River catchment area, but most of the land is arid. Telangana region has rich natural resources. About 45 per cent of the forest area in Andhra Pradesh state is in Telangana region while 20 per cent of the country's coal deposits in the country are also found here. Telangana is also rich in limestone deposits that cater to cement factories. Telangana has other mineral resources like bauxite and mica. Perennial rivers Godavari and Krishna enter Andhra Pradesh in Telangana before flowing down through other regions and ending up in the Bay of Bengal. Telangana region is sitting on potential oil and natural gas reserves, according to a report by Director General of Hydrocarbons (DGH). Telangana has a significant amount of Software export in India. While majority of the Industry is concentrated over Hyderabad, the other cities are also becoming significant IT destinations in the state. Hyderabad's IT exports exceeded $7 billion in 2014.There have been extensive investments in digital infrastructure.

 

AGRICULTURE

Rice is the major food crop and staple food of the state. Other important crops are tobacco, mango, cotton and sugar cane. Agriculture has been the chief source of income for the state's economy. Important rivers of India are the Godavari, Krishna flow through the state, providing irrigation. Telangana agriculture department separated from Andhra Pradesh as part of Andhra Pradesh bifurcation It aims promote agricultural trade and to boost up the agricultural production and productivity in the Telangana.

 

TOURISM IN TELANGANA

Telangana State Tourism Development Corporation (TSTDC) is a state government agency which promotes Tourism in Telangana. Telangana has a variety of tourist attractions including historical places, monuments, forts, water falls, forests and temples. Charminar, Golconda Fort, QutbShahi Tombs, Chowmahalla Palace, Falaknuma Palace and Bhongir Fort, are some of the monuments in the state. The Charminar, built in 1591 CE, is a monument and mosque located in Hyderabad, Telangana, India.

 

DEMOGRAPHIC PROFILE

Telangana with a population of 351.9 lakhs (according to the 2011 census) accounts for about 3.6% percent of the total population of India. Out of this, 177.0 lakhs (50.2%) are males and 174.9 lakhs (49.8%) are females. The sex ratio of the state is 988 as against the national figure of 943. The population density in the state is 307 persons/Sq.Km. In 2012-13, the services sector at Rs.  1, 14,046 crores, contributed 58.1% to the GSDP (at constant prices). It is followed by industry sector, contributing 27.9% (Rs. 54,687 crores) and the agriculture sector’s contribution of 14% (Rs. 27,450 crores). The services sector had fastest growth  of  11.31%  followed  by  industry  sector  (10.04%)  and  agriculture  sector  (6.89%) between 2004-05 and 2012-13.

The Telangana government has proposed to add 230 crore plants in the next three years under a flagship programme which envisages boosting of tree cover in the state by nearly 8%.

 

FOOD AND INDUSTRIAL PROCESSING SECTOR

The Telangana government plans to put greater emphasis on value-addition in the farm sector in its industrial policy. The departments of industry and commerce, agriculture and agro marketing would coordinate together to achieve value maximization for farmers. The government is also keen on encouraging e-marketing activities, which involves networking all agriculture mandis in the state so that farmers get access to prevailing prices across important markets and thereby helping them unlock the right value for their produce. The state in collaboration with research institutes in the country would facilitate an ideal adoption of latest practices ranging from seed technology and farm machinery to improve farm productivity. the state government is also considering specific projects such as setting up a pharmaceutical city near Hyderabad and a cotton hub in Warangal district, the largest producer of long-staple cotton. The Telangana government has begun a survey to identify land that can be offered to new industries in the state. The Telangana government is set to announce its new industrial policy under which scheduled castes and scheduled tribe entrepreneurs would be specially encouraged.

Telangana Government is mulling to set up a 'Pharma City' near the state capital in about 8,000 acres. The City will include industries as well as residential colony, and a power plant with 500 MW capacity will be set up adjacent to the pharma city to provide captive, dedicated and uninterrupted power supply to the industry. The pharma city is expected to accommodate about five lakh employees besides their families in the residential colony touching about twenty lakh over a period. Delegation of Drugs Manufacturers' Association that an international consultancy organisation with expertise in developing in the information technology and pharmaceuticals manufacturing sectors may become backbone of Telangana economy, leaving power production, ports and oil and natural gas to play a pivotal role in driving prosperity in the residuary state. Industrial estates should be contacted to design the pharma city. Telangana's per capita income of Rs 24,409 in 2004-05 has phenomenally grown to a whopping Rs 83,020. While Hyderabad has less number of households using open toilets at 0.9 per cent, Mahabubnagar is at 71.1 per cent. The land-locked state is expected to have nearly Rs 4,000 crore surplus budget, but lingering power deficit may force the new government to spend more on the power purchase. Telangana, spread in 1,14,840 square kilometres, has 66.46 per cent literacy rate with a population of 3.52 crore.

 

ECONOMY OF TELAGANA

The Economy of Telangana is mainly driven by agriculture. Two important rivers of India, the Godavari and Krishna, flow through the state, providing irrigation. Rice, cotton, mango and tobacco are the local crops. Recently, crops used for vegetable oil production such as sunflower and peanuts have gained favour. There are many multi-state irrigation projects in development, including Godavari River Basin Irrigation Projects and NagarjunaSagar Dam, the world's highest masonry dam. Telangana is a mineral-rich state, with coal reserves at SingaerniColleries. The population of Telangana is over 35 million now – much more than 30 million for the whole of Andhra Pradesh, including Telangana, at the time of its formation in 1956. The demands on governance have multiplied over this half a century. Apart from commitment to the development of the region, a smaller state being more easily accessible to the common people can intelligently and speedily grapple with their problems.

 

INDUSTRIAL POLICY FRAMEWORK FOR STATE OF TELANGANA

Industrialization will be the key strategy followed for economic growth and development for Telangana, the 29th state of the country. People of the new state have very high expectations from the Telangana State Government for creating jobs for the youth, promote development of backward areas, maximize growth opportunities by optimum utilization of the available resources, harness the talents and skills of the people etc. The Government of Telangana State realizes that industrial development requires large-scale private sector participation, with the government playing the role of a facilitator and a catalyst. The government is committed to provide a graft-free, hassle-free environment in which the entrepreneurial spirit of local, domestic and international investors will thrive to take up their industrial units in the state of Telangana as the preferred investment destination.

The new Telangana State Industrial Policy will be rooted in certain core values, as follows:

 

                • The Government regulatory framework shall facilitate industrial growth

                • Entrepreneurs will thrive in a peaceful, secure and progressive business regulatory                                        environment

                • Industrial development will lead to massive creation of jobs benefitting local youth

                • Industrialization shall be inclusive and facilitate social equality

 

The new Telangana State Industrial Policy will strive to provide a framework which will not only stabilize and make existing industries more competitive, but also attract and realize new international and national investments in the industrial sector. It is expected that the most significant outcome of this approach will be the production of high quality goods at the most competitive price, which establishes “Made in Telangana-Made in India” as a brand with high global recognition. The Industrial Policy Framework has the following mandate for departments that have any responsibility in the industrialization of the State—Minimum Inspection and Maximum Facilitation.

The Government of Telangana State is determined to create an ecosystem in which the ease of doing business in the state matches and even exceeds the best global standards. Telangana State Government is aware that offering a hassle-free system is considered to be of the highest priority by the industrialists, and accordingly the government will implement a very effective industrial clearance system that will go beyond the traditional single window system.

 

THRUST AREAS AND CORE SECTORS

•             Life Sciences including, bulk drugs, formulations, vaccines, nutraceuticals, biological,   incubation centers, R&D facilities and medical equipment.

•             IT Hardware including bio-medical devices, electronics, cellular communications.

•             Precision engineering, including aviation, aerospace, defence.

•             Food processing and nutrition products including dairy, poultry, meat and fisheries.

•             Automobiles, Transport Vehicles, Auto-components, Tractors and Farm Equipment.

•             Textiles and Apparel, Leather and leather value added products like shoes, purses, bags,         artificial   material infused and coated textiles, paper and paper products.

•             Plastics and Polymers, Chemicals and Petro-chemical, glass and ceramics.

•             FMCG and Domestic Appliances.

•             Engineering and Capital Goods, including castings, foundry and Ferro-alloys and other    metallurgical industries.

•             Waste Management and Green Technologies.

•             Renewable Energy and Solar Parks.

•             Mineral-based and wood-based Industries.

•             Transportation/Logistic Hub/Inland Port/Container Depot.

 

Telangana has emerged as a State that provides that right climate for the growth of IT business and is now one of the most preferred destinations in the Country.

The State of Telangana is poised towards creating a benchmark in Information & Communication Technology (ICT) endowed with a high quality state-of-the-art physical & communication infrastructure of international standards, harnessed human resources, and proactive business friendly policies of the Government.

It is estimated that about 20 lakh acres of land is available in the state that has been identified as unfit for cultivation in Telangana. Based on a detailed survey of these land parcels and identification of those parcels that are fit for industrial use, an industrial land bank for the State of Telangana will be developed.

The development of industrial and related infrastructure will be the responsibility of the Telangana State Industrial Infrastructure Corporation (TSIIC). The financial base of the TSIIC will be strengthened and it will be made to function as an effective organization. All lands in the State identified as fit for industrial use will be transferred to the TSIIC.

To support industrialization, the Government of Telangana will earmark 10% of water from all existing and new irrigation sources for industrial use. Water pipelines will be laid as a part of infrastructure creation for each industrial park by TSIIC. The Government of Telangana State recognizes that quality power and uninterrupted power supply are keys to the growth of the industrial sector. The State has a clear short-, medium-, and long-term plans to first overcome the power shortage and eventually become a power surplus state. Accordingly, uninterrupted power supply will be arranged in each industrial park. The Telangana State Government will encourage usage of non-conventional energy for industrial purposes.

The Telangana State Government is committed to encourage the process of industrialization by making various kinds of incentives available to the entrepreneurs. The Telangana State Government also assures an entrepreneur-friendly and graft-free regime of disbursing the incentives. The Telangana State Government will consider providing incentives to the entrepreneurs in the following areas-

•             Stamp duty reimbursement

•             Land conversion cost

•             Investment subsidy

•             VAT reimbursement

•             Interest subsidy

•             Clean production measures

•             Reimbursement of infrastructure development costs etc.

A sound industrial policy has to ensure that the state taxation structure is conducive to industrial growth and state financial resource augmentation. Distortions in the tax structure leads to evasion of taxes and clandestine transport of industrial inputs and outputs to neighbouring states, which may have advantageous tax rates. The presence of important national and state highways, coupled with the availability of resources and opportunities, provides a great potential for development of industrial corridors in the state along these roadways.

The Industrial Corridors that will be developed initially will be:

 

1) Hyderabad-Warangal Industrial Corridor

2) Hyderabad-Nagpur Industrial Corridor

3) Hyderabad-Bengaluru Industrial Corridor

The new Industrial Policy brought out by the Government of Telangana promises to revolutionise the way industrial sector has been viewed by successive governments in this country. A day is not far when the new Industrial Policy of Telangana will shine as an exemplar among the best in the world.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 44 of 286 | Total 2856 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 44 285 286   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Ductile Iron Pipe Fittings for Water & Sewage with Lost Foam Casting Process - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Cost of Project

Casting other than a pipe, which allows pipeline deviation, change of direction or bore. In addition flanged-sockets, flanged-spigots and collars are also classified as fittings. Iron or steel pipes and tubes are used in a variety of industries. Different types of pipe fittings are used to connect different types of pipe. The type of fitting used will depend on the type of service the pipe being connected must perform. Pipe fittings basically include the range of components that are used to connect pipe ends for in-line, multi-port, offset and mounting configurations. Pipe fitting cross sections are mostly, but not always, circular in shape to match with the pipe section with which they are connected. Pipes can be metallic or plastic and pipe fittings vary depending on the type of pipe used. Pipe fittings are used for various purposes. They can be used to extend or terminate pipe runs, change a pipe's direction, to connect two or more pipes and to change the pipe size.Types of D.I. Pipe : Pipe Adopter , Pipe Elbow, Pipe Coupling, Pipe Union, Pipe Reducer, Pipe Tee . Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Ashutosh Castings Ltd. • Birla Accucast Ltd. • Carnation Industries Ltd. • Chetan Foundries Ltd. • Dee Dee Steel Castings Ltd. • Electrosteel Castings Ltd. • Electrosteel Steels Ltd. • Electrotherm (India) Ltd. • Govind Steel Co. Ltd. • Hindusthan Malleable & Forgings Ltd. • I C L Foundries Ltd. • Indu Engineering & Textiles Ltd. • J K M Ferrotech Ltd. • Jai Balaji Steels (Purulia) Ltd. • Jindal Saw Ltd. • Nelcast Ltd. • Porwal Auto Components Ltd. • Sathavahana Ispat Ltd. • United Foundries Pvt. Ltd. • Yashwant Iron & Steel Works Ltd.
Plant capacity: Pipe Adopter:2 MT/Day •Pipe Elbow :2 MT/Day •Pipe Flange :2 MT/Day •Pipe Union : 2 MT/Day •Pipe Reducer : 2 MT/Day •Pipe Tee:2 MT/DayPlant & machinery: Rs 254 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 946 Lakhs
Return: 26.67%Break even: 60.85%
Add to Inquiry Add to Inquiry Basket

Plastic Optical Lenses - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Optical Lenses are optical components designed to focus or diverge light. Optical Lenses, which may consist of a single or multiple elements, are used in a wide variety of applications from microscopy to laser processing. Many industries utilize Optical Lenses, including life sciences, imaging, industrial, or defense. As light passes through a lens, it is affected by the lens’ profile or substrate. A Plano-Convex (PCX) or Double-Convex (DCX) lens causes light to focus to a point, while a Plano-Concave (PCV) or Double-Concave (DCV) lens causes the light traveling through the lens to diverge. Achromatic Lenses are ideal for applications requiring color correction, while Aspheric Lenses are designed to correct spherical aberration. Germanium (Ge), Silicon (Si), or Zinc Selenide (ZnSe) lenses are ideal for transmitting the Infrared (IR) spectrum, while Fused Silica is well suited for the Ultraviolet (UV). A lens is a transmissive optical device that affects the focus of a light beam through refraction. A simple lens consists of a single piece of material, while a compound lens consists of several simple lenses (elements), usually along a common axis. Lenses are made from transparent materials such as glass, ground and polished to a desired shape. A lens can focus light to form an image, unlike a prism, which refracts light without focusing. Devices that similarly refract radiation other than visible light are also called lenses, such as microwave lenses or acoustic lenses. Most lenses are spherical lenses: their two surfaces are parts of the surfaces of spheres. Each surface can be convex (bulging outwards from the lens), concave (depressed into the lens), or planar (flat). The line joining the centres of the spheres making up the lens surfaces is called the axis of the lens. Typically the lens axis passes through the physical centre of the lens, because of the way they are manufactured. Lenses may be cut or ground after manufacturing to give them a different shape or size. The lens axis may then not pass through the physical centre of the lens. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Bausch & Lomb Eyecare (India) Pvt. Ltd. • G K B Ophthalmics Ltd. • G K B Vision Ltd. • Indo-American Optics Ltd. • Prime Ophthalmic Products Pvt. Ltd. • Techtran Ophthalmics Pvt. Ltd. • Techtran Polylenses Ltd.
Plant capacity: 60,000 Pairs/DayPlant & machinery: Rs 1026 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 2211 Lakhs
Return: 26.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Coir Geotextiles - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Coir as a natural organic product is organically biodegradable. The Fiber is hard and strong and decomposes slowly, making it perfectly suited for use in Geotextiles. Coir Geotextiles provide good support on slopes for about five years and there is no need for post-installation work. Coir Geotextiles is developed by the Coir Board of India. The world has today accepted Coir Geotextiles and acknowledges its effectiveness. Coir Geotextiles, used in many kinds of applications like Slope Stabilisation, Controlling Soil Erosion, Road and Rail Embarkments, River Embarkments, Landscape Areas etc., Coir geotextiles with its Indianised connotation "Coir Bhoovastra", a generic member of the geosynthetic family, are made from the coconut fibre extracted from the husk of the coconut fruit as explained in the following section. Like their polymeric counter parts, coir geotextiles can be synthesised for specific applications in geotechnical engineering practice. Coir geotextiles is not a consumer product, but a technology based product. A range of different mesh matting is available, meeting varying requirements. Coir fibres can be converted into fabric both by woven and non-woven process. Coir mesh matting of different mesh sizes is the most established coir geotextiles. Mesh matting having different specifications is available under quality code numbers H2Ml to H2MIO. These qualities represent coir geotextiles of different mesh sizes ranging from 3.175mm to 25.4mm. Several types of non-woven geotextiles also exist. Most of the non-woven mats are made from loose fibres, which are interlocked by needling or rubberising. Non-woven geotextiles are available in several dimensions and have a minimum thickness of 2mm. Coir geotextiles can be used to stabilize the soil temporarily when construction roads or banks. Coir geotextiles are being used as a separation cum drainage layer in the road. It is also intended to serve as a reinforcement material in the beginning of the project. Geo-synthetics are widely used in the construction of road all over the world, whereas use of coir geotextiles is very limited in such construction. Few Indian Major Players are as under • Amco Industries Ltd. • Amichand Textiles Ltd. • Aspinwall & Co. (Travancore) Ltd. • Delight Handicrafts Palace Ltd. • Dunlop Comforts Pvt. Ltd. • Duroflex Pvt. Ltd. • Eco Wood Ltd. • Karnataka Consumer Products Ltd. • Karnataka State Coir Devp. Corpn. Ltd. • Kerala State Coir Corpn. Ltd. • Kontak Comforts Pvt. Ltd. • Kozylon Coir Products Ltd. • Wires & Fabriks (S.A.) Ltd.
Plant capacity: 6.5 MT/DayPlant & machinery: Rs 654 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 1149 Lakhs
Return: 25.93%Break even: 50.48%
Add to Inquiry Add to Inquiry Basket

Quartz Slabs - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Engineered stone is a composite material made of crushed stone bound together by an adhesive, (most commonly polymer resin, with some newer versions using cement mix). The two common stones used in producing these products are marbles and quartz. The application of these products depends on the original stone used. For engineered marbles the most common application is indoor flooring and walls, while the quartz based product is used primarily for kitchen countertops. Quartz is the most abundant mineral on Earth and one of the hardest, so it is "hardly" surprising that manufacturers saw its great potential for a surface material more than 50 years ago. Since that time, quartz countertops have grown in popularity as homeowners discovered what the earliest quartz pioneers knew - when the natural mineral quartz is improved upon by man's ingenuity, quartz countertops can compete with other natural stone countertops in every way. Engineered quartz (not to be confused with Quartzite, another appealing natural stone used as counters) is a manmade product created mostly from natural materials. It’s made of 90 to 94 percent ground quartz and 6 to 10 percent resins and pigments that are combined into durable and nonporous slabs. The strength of quartz, even in a manufactured form, makes it naturally resistant to abrasion, scratches, dents, and even acids without the need for sealants. And the environmental impact of manufactured quartz is low: Quartz is an abundant material and the finished product is nontoxic and nonallergenic, and will last a lifetime, reducing the need for replacement. Quartz countertops quickly became popular in Italy, and have been featured in European kitchens for decades to follow. It took longer for the trend to catch on in the United States - this may be explained in various ways: trends and fashions that originate abroad often take time to trickle to the U.S., or, more likely, American homeowners were satisfied with our current options at the time (laminate was the predominant surface in the 60s and 70s) and were not inclined to embrace a material that looked so similar to widely available natural stone options like granite, marble and limestone. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Aakash Universal Ltd. • Associated Marmo & Granites Ltd. • Elegant Marbles & Grani Inds. Ltd. • Inani Marbles & Inds. Ltd. • Madhav Marbles & Granites Ltd. • Mahak Marbles Pvt. Ltd. • Mira Textiles & Inds. (India) Ltd. • N C L Marbles & Granites Ltd. • Neelmani Mines & Marbles Ltd. • Pokarna Engineered Stone Ltd. • Polar Marmo Agglomerates Ltd. • Priceless Overseas Ltd. • Rose Marbles Pvt. Ltd. • S V I L Mines Ltd. • Shreeji Industries Ltd. • Shrenik Marbles Ltd. • Sukher Marbles Ltd. • Tamil Nadu Minerals Ltd. • Vineet Udyog Ltd.
Plant capacity: Quartz Slabs (760 x 2440 x 15 mm):60 Nos/DayPlant & machinery: Rs 101 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 350 Lakhs
Return: 26.58%Break even: 51.79%
Add to Inquiry Add to Inquiry Basket

Aluminium Fluoride - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Aluminium fluoride is the chemical compound with the formula AlF3. It has the consistency of a white powder. AlF3 is refractory, in strong contrast to the other halides of aluminium. Adding aluminium fluoride to the production process of primary aluminium lowers the consumption of electricity required in the smelting process and thereby considerably contributes to the reduction of production costs of aluminium. Energy is a major cost factor in aluminium production. Aluminium fluoride is not substitutable by other products in this respect. Aluminium producers (smelters) are the main users of aluminium fluoride. For many years now the production of aluminium has been growing. Every year more than 20 million tons of aluminium is produced world-wide, some 30% of which in Europe. Depending on the type and efficiency of the production process, around 20 kg of aluminium fluoride are used in producing one ton of aluminium. There are two main ways to produce aluminium fluoride. One production process is called the "dry process" in which aluminium fluoride is produced from fluorspar (CaF2) and results in a quality referred to as "high density" aluminium fluoride. High density quality consists of 90-92% of aluminium fluoride. The other main production process is called the "wet process" in which aluminium fluoride is produced from a by-product of fertilizer plants and results in a quality called "low density" aluminium fluoride. Low density quality consists of 97% of aluminium fluoride. All the producers that are addressees of this Decision produce and sell high density aluminium fluoride. Aluminium fluoride is used in many industrial processes. It is one of the minor constituents added to the electrolytic cells during the production of metallic aluminium. Aluminium fluoride is used in turning alumina into aluminium. It lowers the melting point of alumina and boosts its electrical conductivity. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Alufluoride Ltd. • Mafatlal Fine Spg. & Mfg. Co. Ltd. • Navin Fluorine Intl. Ltd. • Southern Petrochemical Inds. Corpn. Ltd. • Tanfac Industries Ltd.
Plant capacity: Aluminium Fluoride : 16.7 MT/Day •Silica as by product: 5.67 MT/Day Plant & machinery: Rs 408 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 1069 Lakhs
Return: 26.69%Break even: 56.04%
Add to Inquiry Add to Inquiry Basket

Toothbrush - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

A toothbrush is a dental instrument used for cleaning teeth, ideally in conjunction with toothpaste or mouthwash. The toothbrush consists of a plastic handle and nylon bristles attached to the head of the brush. Toothbrush occupies a prominent and very important place among the dentifice available today. Toothbrushes are getting more complex and sophisticated every year. New geometries, material combinations and additional functions are the only way to set off from the competition. Today’s consumer expects a dental care system which offers a multitude of preventive dental care measures such as interdental space cleaning, plaque and tartar removal. Due to the increasing awareness and importance of dental hygiene, the use of tooth paste was confined to the upper and upper middle classes of urban society, but with increasing awareness the use of Toothbrush has become well established in even rural house hold. Toothbrush being consumer product and its market being quite competitive and also acceptable. For keeping good health, care of teeth is one of the essential step. The particle of food that sticks to our teeth give birth to fouling smell and many dreadful diseases, which destroy the gums and results in tooth decay. A man, who do not have teeth in his mouth, only know as how important are these. A man having fouling smell coming out from his mouth cannot even get the close company of his companion, and if someone has got a dental diseases, one can blame only one's carelessness in the past. Fortunately people have become conscious of Toothbrushing. Any entrepreneur venture into this field will be successful Few Indian Major Players are as under • Ajay Home Products Ltd. • Anchor Health & Beauty Care Pvt. Ltd. • Andhra Pradesh State Civil Supplies Corpn. Ltd. • Aryan Brush & Estate Developers Ltd. • Camelot Investments Co. Pvt. Ltd. • Colgate-Palmolive (India) Ltd. • Contemporary Targett Ltd. • Dr. Fresh Assets Ltd. (1990) • Gillette India Ltd. • Sinhal Metal Inds. Ltd. • Trim Plastics Ltd. • W H Targett India Ltd. • Warren Pharmaceuticals Ltd.
Plant capacity: 15,000 Nos/DayPlant & machinery: Rs 178 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 316 Lakhs
Return: 26.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Caramel Food Colorant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Caramel colors are amorphous, brown to brownish materials resulting from the carefully controlled heat treatment of food grade carbohydrates in the presence of small amounts of food grade acids, alkalis or salts. Caramel or black jack is a dark brown colour prepared by heating sugar until it is decomposed and then adding boiling water to form a thick syrup. Caramel will impart a distinctive flavour of burnt sugar. Caramel is a well-known simple, brown means flavor and staple commercial material. It is an amorphous, dark-brown material that has been produced by the carefully controlled heat treatment of saccharine materials such as dextrose, invert sugar, lactose, malt syrup, molasses, sucrose, starch hydrolysates and fractions thereof, etc. The heavy-bodied, almost black syrup contains color, components that impart the amber shade found in carbonated beverages, pharmaceutical and flavoring extracts, candies, soups, bakery products, and numerous other foods. Caramelization, the act of breaking up the natural sugar molecules in food to create a different flavor compound, makes everything taste better. Caramelization is one of the most important types of browning processes in foods. It is the interaction between sugar and sugar. Fructose and glucose are reducing sugars so they give their electrons to other molecules developing compounds which give caramel colors and flavors, viz; Diacetyl gives a buttery flavor, Furan gives a nutty flavor, Acetaldehyde gives a rum or cherry components flavor. Few Indian Major Players are as under • Aarkay Food Products Ltd. • Dynemic Products Ltd. • International Flavours & Fragrances (India) Ltd. • Kancor Ingredients Ltd. • Neelikon Food Dyes & Chemicals Ltd. • Universal Starch-Chem Allied Ltd. • Vidhi Dyestuffs Mfg. Ltd.
Plant capacity: Caramel Food Colour:50 MT/DayPlant & machinery: Rs 405 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 1223 Lakhs
Return: 25.82%Break even: 56.62%
Add to Inquiry Add to Inquiry Basket

Beer Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Beer is the world's oldest beverage, possibly dating back to the 6th millennium BC. It is also the most widely consumed alcoholic beverage and the third most popular drink overall after water and tea. Produced by the brewing and fermentation of starches, mainly derived from cereals — the most common of which being barley. Beer forms part of the culture of many nations, and has acquired various social traditions and associations. Beer is consumed in countries all over the world. Sales of beer are four times that of wine and in most societies, beer is the most popular alcoholic beverage. Today, the brewing industry is a global business, consisting of several dominant multinational companies and many thousands of smaller producers ranging from brewpubs to regional breweries. Among the alcoholic drinks, Beer is quite common and popular in almost every Country of the World. People of different Countries take beer in varying much like a soft drink in European Countries it is just a substitute of water. The alcoholic contents and main source stuff also keep varying according to the tests of the major part of population of the particular country although it is a fashion to ask for beer of every origin in every Country. Formulations of beer manufacturing are done with the view of availability of the raw materials in that particular part of the World where the brewery is proposed to be established. In most of the parts of the world, barley is a universal source of beer extraction. But, beers are manufactured from Chamomile flowers and powdered gingers etc. as well. Separate formulations have been adopted for every major ingredient used in brewing & distillation of beer. Few Indian Major Players are as under • Appollo Distilleries & Breweries Pvt. Ltd. • Arlem Breweries Ltd. • Arthos Breweries Ltd. • Associated Breweries & Distilleries Ltd. • Aurangabad Breweries Ltd. • Blossom Industries Ltd. • Buckingham Distilleries & Breweries Ltd. • East Coast Breweries & Distilleries Ltd. • Foster'S India Ltd. • Hindustan Breweries & Bottling Ltd. • Kalyani Breweries Ltd. • Kool Breweries Ltd. • Lilasons Breweries Ltd. • Lilasons Industries Ltd. • Malabar Breweries Ltd. • Molson Coors India Pvt. Ltd. • Mysore Breweries Ltd. • Sabmiller India Ltd. • United Breweries Ltd. • Winsome Breweries Ltd.
Plant capacity: Beer (650 ml size Bottle):10,000 Litres/DayPlant & machinery: Rs 306 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 1055 Lakhs
Return: 27.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

SOLAR PANEL- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Solar Panels are in general Silicon made Rectangular Shaped Glass Covered Products which Produce Electricity when exposed to the Sun. These Panels produce Direct Current (DC) Electricity which has to be converted by a Solar Invertr to Alternating Current (AC) Electricity to be used by Consumers. . Solar Panel produced Electricity usually costs between Rs 15-18 /KwH (much higher than the Rs 3-6/unit paid normally) which makes it uneconomical except in special cases like off grid applications. Replacing expensive Diesel powered Telecom Towers with Solar Panels is also an option. Sharply falling Solar Panel costs should make it competitive with your electricity in 2-3 years. In places like Italy, Solar Electricity is already competitive due to high prices of electricity. Conversion of light energy in electrical energy is based on a phenomenon called photovoltaic effect. Silicon is the most widely used semiconductor material for constructing photovoltaic cell. When semiconductor materials are exposed to light, the some of the photons of light ray are absorbed by the semiconductor crystal which causes significant number of free electrons in the crystal. This is the basic reason of producing electricity due to photovoltaic effect. The heart of the solar energy generation system is the Solar cell. It consists of three major elements, namely:- the semiconductor material, junction formed within the semiconductor, the contacts on the front and back of the cell that allow the current to flow to the external circuit. Uses and Application of photovoltaic are in agriculture, industry, telecommunication and public services. Solar power is attractive because it is abundant and offers a solution to fossil fuel emissions and global climate change. Earth receives solar energy at the rate of approximately 1,73,000 TW. In terms of all renewable energy, currently India is ranked fifth in the world with 15,691.4 MW grid-connected and 367.9 MW off-grid renewable energy based power capacity. India is among top 5 destinations worldwide for solar energy development as per Ernst & Young’s renewable energy attractiveness index. As a whole there is a good scope for entrepreneurs for investment.
Plant capacity: Solar PV Module (240 watt) : 350 Nos/day (25 MW)Plant & machinery: Rs 278 Lakhs
Working capital: -T.C.I: Cost of project: Rs 852 Lakhs
Return: 29.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

MEDIUM DENSITY FIBERBOARD - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Fiberboard is a type of engineered wood product that is made out of wood fibers. Types of fiberboard (in order of increasing density) include particle board, medium-density fiberboard, and hardboard. Fiberboard, particularly medium-density fiberboard (MDF), is heavily used in the furniture industry, auto industry. Medium density fiberboard (MDF) is a generic term for a panel primarily composed of lignocellulosic fibers combined with a synthetic resin or other suitable bonding system and bonded together under heat and pressure. Additives may be introduced during manufacturing to improve certain properties. The entire interfiber bond is formed by a synthetic resin or other suitable organic binder. MDF is generally cheaper than plywood. The surface of MDF is very smooth which makes it great surface for painting. MDF is very consistent throughout, so cut edges appear smooth and won’t have voids or splinters. Indian particle board and plywood industry dates back to the First World War. It has come a long way having grown nearly six-fold since its inception. The large producers account for 15% of the total production, producing some 38 mn sqm of plywood and blockboards.MDF prices have been increase at an estimated average annual rate of 2.6% in 3 years to 2016. The global potential demand for panel board is estimated at 250 million m³ per year and the potential market for MDF alone is 100 million m³. As a whole it is a good project for entrepreneurs.
Plant capacity: Medium Density Fiberboard (MDF) : 50001 CBM/AnnumPlant & machinery: Rs 2034 Lakh
Working capital: -T.C.I: Cost of Project: Rs 3873 Lakh
Return: 28.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 44 of 286 | Total 2856 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 44 285 286   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top