REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Mizoram- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mizoram is a state of India. It is located in the northeastern part of the country and is bounded by Myanmar (Burma) to the east and south and Bangladesh to the west and by the states of Tripura to the northwest, Assam to the north, and Manipur to the northeast. The capital is Aizawl, in the north-central part of the state. Agriculture is the dominant economic activity of Mizoram, engaging more than two-thirds of the workforce. Two types of agriculture are practiced: terrace cultivation, in which crops are planted on relatively permanent, graduated terraces on the sides of hills and mountains to conserve water and reduce soil loss; and shifting agriculture, in which tracts called jhum are cleared by burning, cultivated for a limited period of time. Mizoram has a population of 1,091,014 with 552,339 males and 538,675 females. This reflects a 22.8% growth since 2001 census; still, Mizoram is second least populated state of India. The sex ratio of the state is 976 females per thousand males, higher than the national ratio 940. The density of population is 52 persons per square kilometer. Mizoram gross state domestic product (GSDP) in 2011-2012 was about 6991 crore (US$1.1 billion). The state's gross state domestic product (GSDP) growth rate was nearly 10% annually over 2001-2013 period. With international borders with Bangladesh and Myanmar, it is an important port state for Southeast Asian imports to India, as well as exports from India.

TOURISM

Mizoram, the Land of the Highlanders, is sandwiched between Myanmar, Bangladesh and the states of Tripura, Assam and Manipur. The rivers, peaks, plains and the lakes are the treasures of Mizoram. It is full of high ranges running from north to south covered by greenery throughout the year. The Mizoram State Government begins to recognize tourism as an important sector of the economy which needs to be developed for greater income generation. More emphasis on sustainable eco-tourism, adventure tourism, village tourism and rural tourism would bring in high - value tourism. With the increase of tourist the need for budget hotels has been acutely felt.

Tourism has emerged as an important economic activity and one of the fastest growing industries in the world. Globally, Tourism is the fastest growing industry and in terms of value, it comes third only after petroleum and Transport Industry.

 

As such, Tourism Department in Mizoram is also one of the fastest growing Departments in Mizoram. The Department has achieved these objectives by constructing Tourist Lodge, Tourist Resort and other Tourist amenities in difference places of Mizoram through liberal financing of Ministry of Tourism, Government of India.


INDUSTRIAL POLICY

The Industrial Policy of Mizoram State was first notified on 15.3.1989 to give direction to the strategy for Industrial development of the State. It laid stress on reducing shifting cultivation by encouraging a shift from primary to secondary sectors while protecting the Socio-Cultural and ethnic identity of the indigenous enterprise of Mizoram.

In view of the National Industrial Policy which laid special emphasis for the development of Industries in the North Eastern Region, the Govt. of Mizoram had notified new Industrial Policy 2000 for accelerated Industrial and Economic development of the State. The Government had adopted the approach for identification of thrust areas and promoting them with fiscal and other incentives packages. Broad policy of Foreign Direct Investment (FDI) and Investment from outside the State has been adopted on Joint venture (JV) mode to safeguard the interest of the tribal population of Mizoram. Various administrative support system and market support system are also announced. The Govt. of Mizoram is mandated in giving sustainable employment and introducing better utilization of land by introducing New Land Use Programme (NLUP).

OBJECTIVES

•        To create infrastructure facilities, provide incentives and marketing as well as technical support to industries.

•        To provide skill development and training for educated youth to develop entrepreneurial skills and make them self-employed.

•        To create employment opportunities particularly to the vulnerable section of the society and people in rural area, ensuring inclusive development.

•        To reduce sectoral and regional imbalance in the industrial development in the State by promoting Industries under all sectors.

•        To create proper linkage of processing Industries with the farm produce of agriculture, horticulture, forest and livestock’s.

•        To attract investment in the state.

IDENTIFICATION OF THRUST AREAS

Thrust will be given for those industries based on value addition of locally available resources. Special incentives will be formulated for speedy development of industrial units engaged in any of the following thrust sector Enterprises.

•        Forest-based Industries

The vast bamboo and other forest resources of Mizoram will be optimally harvested for setting up of Industry for manufacturing of various high value bamboo and other forest based products.

•        Food Processing Industries

Primary production of various food items, whether agricultural based, horticultural or livestock based will be linked with processing Industries.

•        Handloom Industries

Handloom sector will continue to receive serious attention of the Govt. Utmost importance will be given for improving quality product by introducing improved design, packaging, branding.

•        Handicraft Industries

The traditional skill of Mizo people will be upgraded and diversified for market competitiveness of handicraft products.

•        Plantain fibre and hill brooms

The Govt. will encourage value addition of hill-brooms. The flow of raw and unprocessed broom outside the state will be discouraged by giving attention towards value addition to help local industry.

•        Textile related industries

Bulk production of readymade garments will be encouraged as this sector is having good potential for market outside the state and export.

•        Animal Feed and poultry feed Industries

The Government is giving thrust towards having sufficient meat and meat products for which farming has been encouraged.

INCENTIVES

The incentives offered under the Rules for the grant of incentives/subsidies under the Industrial Policy of Mizoram State are-

•        Subsidies on the cost of Project Report 

•        Land subsidy

•        Factory rent subsidy

•        Manpower development subsidy

•        Interest subsidy

•        Power subsidy

•        Subsidy on Power Line 

•        Subsidy on Power Generating set

•        State Transport subsidy on Plant and Machinery 

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 39 of 249 | Total 2486 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 39 248 249   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Cosmetics Manufacturing Unit Perfume Gel, Nail Polish Remover Liquid, Hair Gel, Face Wash Gel, Face Cream, Talcum Powder, After Shave Lotion Liquid, Shaving Cream Gel and Hand Wash Gel

Perfume gels are consumer products used in homes, or commercial products used in restrooms, that typically emit fragrance. There are many different methods and brands of air freshener. Nail polish remover is an organic solvent used to remove nail polish from the nails. Painting the nails is very fashionable and easy to do change the color constantly.Hair gel is a hairstyling product that is used to harden hair into a particular hairstyle. Hair gel is a popular product for controlling a person's hair and maintaining the look wants. Gel Cleansers are designed to remove excess surface oils on the skin. This can be helpful for overly oily or acneic skin, as long as it is not stripping your skin of natural oil, but rather cleansing the skin of excess oil. Face cream, Moisturizers prevent and treat dry skin, protect sensitive skin, improve skin tone and texture, and mask imperfections.Talcum powder has medicinal properties too. Talc absorbs moisture and reduces friction, thus minimizing sweat production, and preventing fungal infections. Aftershave is a liquid product applied to skin after shaving. It contains an antiseptic agent such as denatured alcohol, stearate citrate or witch hazel to prevent infection of cuts etc. An aftershave lotion has a watery consistency, which is good for men with an oily skin type.Shaving gel softens the hair on your face for easier removal and may also have a moisturizing effect. Many shaving gels are gentler on the skin than regular soaps. Hand washing, also spelled hand washing and known as hand hygiene, is the act of cleaning one's hands for the purpose of removing soil, dirt, and microorganisms.India’s retail beauty and cosmetics industry, currently estimated at $950 million, is likely to almost treble to $2.68 billion by 2020, experts said. According to a study titled “Prospects in the FMCG sector,” recently made public by the Associated Chambers of Commerce and Industry of India, FMCG sector will witness more than 50 percent growth in rural and semi urban India by 2014.There are different kinds of raw material used in the industries. There is large demand of this consumer item. Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Ajanta India Ltd. • Chemfield Cellulose Pvt. Ltd. • Cholayil Pvt. Ltd. • Givaudan (India) Pvt. Ltd. • Hertz Chemicals Pvt. Ltd. • Hexagon Nutrition Pvt. COST ESTIMATION
Plant capacity: 135,000 Kgs/annumPlant & machinery: 50 lakhs
Working capital: -T.C.I: Cost of Project: 197 lakhs
Return: 26.00%Break even: 73.00%
Add to Inquiry Add to Inquiry Basket

LPG Cylinders (Domestic and Commercial)

LPG Cylinder is an essential item for filling liquefied petroleum gas used for cooking purpose. The body of LPG cylinder is deep drawn in two pieces then these are welded together to make a compact unit without any leak and defect etc. LPG cylinders are in use in 5 Kg., 12 Kg., 14.2 Kg. & 19 Kg. capacities. To ascertain the quality, safety and performance certain regulations are applicable such as BIS standardization and Explosive License etc. While all the cylinders are spray-painted with a signal red colour. BPC cylinders have yellow ring around the bung. HPC cylinders in blue ring and IOC cylinder are fully red. In case of 19 Kg. cylinder the top is painted olive green. The cylinders carry their complete history with regard to their serial number, Tare/Gross weight, water capacity, ISE monogram test date, manufacturer identification and year of manufacturing. For domestic use, cylinders typically will have capacities ranging from 4kg to 15kg whereas for commercial and industrial use, these will range from 45kg to 50kg. Smaller cylinders i.e. 1kg to 3kg capacities are used for camping equipment and in developing countries where they often serve as an entry level for LP Gas applications in low income households - mainly for cooking. LP Gas cylinders will almost always be used in the vertical position although forklift cylinders are typically designed to be used horizontally with capacities ranging from 15kg to 22kg. LPG consumption in India is forecast to surpass 35 MMT by FY26. North region dominated India LPG market over the past few years, and is further forecast to continue dominating the market through FY26. Liquefied petroleum gas (LPG) is a flammable mixture of various hydrocarbons, and majorly consists of propane and butane. LPG gas is colorless and odorless; and emits less quantity of CO2 when compared to petrol or diesel. Thus, LPG is extensively used as a cooking fuel, both in commercial and residential setups throughout the country. Few Indian major players are as under • Balaji Pressure Vessels Pvt. Ltd. • Bhiwadi Cylinders Pvt. Ltd. • Confidence Petroleum India Ltd. • E C P Industries Ltd. • Everest Kanto Cylinder Ltd. • J R Fabricators Ltd. • Jay F E Cylinders Ltd. • Kanyaka Parameshwari Engg. Ltd. • Lizer Cylinders Ltd. • Mahaveer Cylinders Ltd. • Minda Autogas Ltd. • North India Wires Ltd. • Punjab Gas Cylinders Ltd. • Sanmati Metals Ltd. • Sreenidhi Engineering Ltd. • Surya Shakti Vessels Pvt. Ltd. • Tirupati L P G Inds. Pvt. Ltd. • Trend East West Lpg Bottling Ltd. • Universal Cylinders Ltd. • Worthington Nitin Cylinders Pvt. Ltd.
Plant capacity: LPG Cylinders (Domestic 14.2 Kgs Size) 640 nos. per day LPG Cylinders (Commerical 18 Kgs Size) 560 nos. per dayPlant & machinery: 88 lakhs
Working capital: -T.C.I: Cost of Project : 391 lakhs
Return: 32.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

LPG Cylinders (Domestic and Commercial)

LPG Cylinder is an essential item for filling liquefied petroleum gas used for cooking purpose. The body of LPG cylinder is deep drawn in two pieces then these are welded together to make a compact unit without any leak and defect etc. LPG cylinders are in use in 5 Kg., 12 Kg., 14.2 Kg. & 19 Kg. capacities. While all the cylinders are spray-painted with a signal red color. BPC cylinders have yellow ring around the bung. HPC cylinders in blue ring and IOC cylinder are fully red. In case of 19 Kg. cylinders the top is painted olive green. The cylinders carry their complete history with regard to their serial number, Tare/Gross weight, water capacity, ISE monogram test date, manufacturer identification and year of manufacturing. For domestic use, cylinders typically will have capacities ranging from 4kg to 15kg whereas for commercial and industrial use, these will range from 45kg to 50kg. India is the world's second largest consumer of LPG in the domestic sector, doing over 18 million tons each year. This is achieved through more than 200 LPG Bottling plans are operational across the country. On March 27, 2015 PM had officially launched the 'Give-it-Up' campaign, urging the well-off to surrender their LPG subsidy so that it can be targeted for the needy. The aim is also to bring down the country's dependence on energy imports by 10 per cent by 2022. LPG consumption in India is forecast to surpass 35 MMT by FY26. We actively encourage a culture of innovation, which facilitates the development of new technologies and ensure a high quality product. Few Indian major players are as under • Balaji Pressure Vessels Pvt. Ltd. • Bhiwadi Cylinders Pvt. Ltd. • Confidence Petroleum India Ltd. • E C P Industries Ltd. • Everest Kanto Cylinder Ltd. • J R Fabricators Ltd.
Plant capacity: LPG Cylinders (Domestic 14.2 Kgs Size): 640 Nos. /Day LPG Cylinders (Commercial 19 Kgs Size): 560 Nos. /DayPlant & machinery: 88 lakhs
Working capital: -T.C.I: Cost of Project: Rs 392 lakhs
Return: 33.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Roller Flour Mill

Roller Flour Mills involved in commercial milling operations and unorganized sector consisting of mainly Chakkis. Around 800 large Flour Mills in the country convert about 10.5 Million Tons of wheat into wheat products i.e., Coarse Flour, Flour, Semolina, Bran & Wheat Germ. The installed capacity of Flour Mills is more than 21 Million Metric Tons. Roller Flour Milling sector processes around 12 – 15 per cent of the total wheat consumed in the country, the balance being processed through Stone Chakkis. The majority of units have an average installed capacity of 70 tons per day and only around 10 per cent of the mills are above the capacity of 120 Tons per day. Maida is finely milled flour and is usually refined using a fine mesh of 600 mesh per square inch. Sooji/Rava is used in many sweetmeat products. Bran separated on milling is used as cattle feed. The products sold under brand names are very few. The concept for branded cereal flour products is now increasing. The big giants like Hindustan Lever, NEPC Agroand Nirma etc. have jumped in to this lucrative industry. Indian agriculture is now going through critical times. On the one hand, relying on the strength of Green Revolution strategy and having emerged as an exporter of grains and food products, the government is keen to enact a Food Security law to ensure availability of food grains to every individual in the country. India, the second largest producer of the food grain, is estimated to have imported 5.2 lakh tones of wheat in the year ended March 31, 2016, compared with 52,000 tones the year before, the Roller Flour Millers' Federation of India said. According to research, the packaged wheat flour market in India is growing at whooping CAGR of almost 19% since past three years. If the growth trajectory remains the same, market may likely to touch the new height of more than Rs 7500 crore in current fiscal (2015-16) itself. As a whole there is a good scope for new entrepreneur to invest in this business. Few Indian major players are as under • Ambe Agro Inds. Ltd. • Arpan Foods Ltd. • Aruppukottai Shri Ramalinga Roller Flour Mills Ltd. • B P Food Products Pvt. Ltd. • Bambino Food Inds. Ltd. • Bannari Amman Flour Mill Ltd. • Bhawani Roller Flour Mills Ltd.
Plant capacity: Maida: 50 MT /Day Sooji: 12 MT /Day Wheat Flour : 20 MT /Day Wheat BranPlant & machinery: 323 lakhs
Working capital: -T.C.I: Cost of Project : Rs 746 lakhs
Return: 29.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Nuts & Bolts (M.S. Fasteners)

A fastener is a connective mechanism that mechanically joins or affixes two or more objects together. A bolt is an externally threaded fastener designed for insertion through holes in assembled parts, and is normally intended to be tightened or released by torquing a nut. A nut is a type of hardware fastener with a threaded hole nuts and bolts are manufactured from alloy steels having high tensile strength and resistant to continuous wear and tear. Bolt is cylindrical piece of metal that fasten objects together. Bolts and nuts can be zinc or cadmium plating to resist corrosion. Bolt and nut are used to fasten together loose parts mainly in industries and workshops. Nut is device, which rolls on these threads. In nuts internal threading is done through the combination of nuts and bolts combination into appropriate sizes. Screw demonstrates their true merit in smooth movements, during assembly etc. Nuts and Bolts are available in various sizes and shapes. The kind of the classification of bolts and nuts may broadly be those made by the cold and hot process plant. Nuts are plain, square or hexagonal in shape with flat chambered, or washer crowned top. Bolts, nuts may be finished or unfinished, and may be regular or heavy type. Fasteners mainly cover nuts, bolts, screws, studs and rivets and are segmented between MS (mild steel) and HT (high tensile) fasteners. These fasteners are used in engineering systems.The overall fasteners market is estimated at about Rs 28 bn. While the organized sector (HT fasteners) has a share of 65%, the balance of 35% is shared by unorganized sector and imports. In fact there isno assembly complete without fasteners. The automotive industry is the largest end-user of fasteners with the remaining demand coming from sectors like textile machinery, railway locomotives, construction, computer hardware and general engineering. Industrial fasteners, accounting for 40% of the total demand, are more oriented towards the retail markets. Original Equipment Manufacture (OEM) segment is mainly dominated by organized players due to high intensity of capital and technology. As the sectors mentioned above use fasteners extensively and there is a vast replacement market spread across the country, hence the scope of venturing to this sector is highly promising. Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian major players are as under • A V R Fasteners Pvt. Ltd. • Adinath Forging Pvt. Ltd. • Agarwal Bolts Ltd. • Agarwal Fasteners Pvt. Ltd. • Atul Fasteners Pvt. Ltd. • Deepak Fasteners Ltd. • Dev Fasteners Ltd.
Plant capacity: Mild Steel/HT Bolts: 625 Kgs. /DayMild Steel/HT Nuts: 125 Kgs. /DayPlant & machinery: 33 lakhs
Working capital: -T.C.I: Cost of Project : Rs 54 lakhs
Return: 27.00%Break even: 71.00%
Add to Inquiry Add to Inquiry Basket

Wood Plastic Composite (WPC)

WPCs are composites containing a wood component in particle form (wood particles/wood flour) and a polymer matrix. They are used in a variety of structural and non-structural applications ranging from component and product prototyping to outdoor decking. Wood plastic composites (WPCs) are roughly 50:50 mixtures of thermoplastic polymers and small wood particles. WPCs can be formed into almost any shape and thus are used for a wide variety of applications, including windows, door frames, interior panels in cars, railings, fences, landscaping timbers, cladding and siding, park benches, molding and furniture.This product is part of the composites to be named wood polymer composite (WPC), wood fiber composite (WFC), poly wood and pall wood, poly board, wood flex, stock wood and wood plastic. WPC is manufactured by dispersing wood particles into molten plastic with coupling agent or additives to form composite material through various techniques of processing such as extrusion, compression or injection molding. The majority of WPCs are manufactured by profile extrusion, in which molten composite material is forced through a die to make a continuous profile of the desired shape. Wood plastic composites are an important and growing segment of the forest products industry. This industry segment has grown in double digit percentages annually for the past decade. In North America, the WPC market has been dominated by rail and decking products while in Europe more emphasis has been placed on automotive applications. The wood plastic composite market is projected to grow from $ 2579.90 million in last year to $4,601.7 million by 2019, with a CAGR of 12.2%. Automotive industry is the most crucial sector in the Europe and accounts over 4% of European GDP. Germany dominated the premium car production in 2015 accounting over 40% of the total market. As a whole any entrepreneur can venture in this project without risk and earn profit.
Plant capacity: 4800 Kgs /DayPlant & machinery: 146 lakhs
Working capital: -T.C.I: Cost of Project: 391 lakhs
Return: 27.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

HDPE/PP Woven Fabric

Woven is a method by many threads or tapes woven in two directions (warp and weft), to form a fabric for plastic industry needs. In the plastic woven industry, with a plastic film is drawn into filaments, woven into fabric/sheet/cloth. Woven polypropylene is a great fabric to print on and can be choose normal easy printing such as simple brand text and image with three colors, also full color printing with BOPP lamination. HDPE/PP Woven Fabrics are used in various end applications like Grain & Pulses Bags, Foods & Spices Bags, Animal Food Bags and Fertilizers& Chemical Bags etc. Woven fabric is a textile formed by weaving. It is produced on a loom, and made of many threads woven on a warp and a weft. As use of technical textiles is dictated by need, its pricing normally offers good margins. Flexible Intermediate Bulk Containers (FIBC's): The FIBC is a large bag made of woven polypropylene (PP) fabric that is usually extrusion coated to provide additional barrier and leak-proofness. The bag is constructed by stitching the bag and adding accessories like handles or straps/loops to facilitate mechanized handling. Indian FIBC industry is estimated to be about 125,000 MT per year valued at some Rs. 1,350 crores. It has registered a compounded annual growth rate of 15-20 percent over the last 10 years. The demand is growing at around 16-17% YoY for the last three years. Forecasts indicate that this demand in India is likely to increase and reach around 1.5 Mil tones by 2013-14. As a whole entrepreneur can venture in this field will be successful. Few Indian major players are as under • Abdos Polymers Ltd. • Agarwal Polysacks Pvt. Ltd. • Ambica Fab Design Pvt. Ltd. • Anya Polytech & Fertilizers Pvt. Ltd. • Ashoka Poly Laminators Ltd. • Bardanwala Plastics Pvt. Ltd.
Plant capacity: 8.4 MT/DayPlant & machinery: 500 lakhs
Working capital: -T.C.I: Cost of Project: Rs 923 lakhs
Return: 28.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

NPK Compound Fertilizer (Granular Type)

Fertilizers are soil amendments applied to promote plant growth, the main nutrients added in fertilizer are nitrogen, phosphorus, potassium and other nutrients are added in smaller amounts. Collectively, the main nutrients vital to plants by weight are called macronutrients, including: nitrogen (N), phosphorus (P), and potassium (K) (i.e. N- P-K). NPK ratings consist of three numbers separated by dashes (e.g., 10-10-10 or 16-4-8) describing the chemical content of fertilizers. The first number represents the percentage of nitrogen in the product; the second number, P2O5 the third, K2O. Fertilizers do not actually contain P2O5 or K2O, but the system is a conventional shorthand for the amount of the phosphorus (P) or potassium (K) in a fertilizer. A 50-pound (23 kg) bag of fertilizer labeled 16-4-8 contains 8 lb (3.6 kg) of nitrogen (16% of the 50 pounds), an amount of phosphorus equivalent to that in 2 pounds of P2O5 (4% of 50 pounds), and 4 pounds of K2O (8% of 50 pounds). Compound fertilizers are N-P-K fertilizers with other elements purposely intermixed. Fertilizers are classified according to the content of these three elements. Labeling is according to relative amounts of each of the three elements by weight (i.e., mass fraction). The development of the agriculture sector and improvement of the living standards of small-scale farmers are priorities of the Government of Malaysia. A higher level of agricultural production requires an increased and/or more efficient use of inputs, especially fertilizers. The main sources of imported urea were from Indonesia (54.5% valued at RM 286.1 million), China (21.0% valued at RM110.2 million). Urea export by Malaysia, has been trending upward since 2004 (RM492.0 million) to 2008 (RM 900.0 million). The major importing countries of Malaysian urea in 2008 were 8 Thailand (32.5%), Australia (26.8%), Japan (13.5%), India (14.0%) and the Philippines (6.0%). The global trade in NPKs grew from 13mn t in 2010 to16mn t in 2016.Russia has continued to increase export capacity, Moroccan NPK exports leapt from 74kt in 2013 to 840kt by 2016,Belarus NPK exports have also grown strongly from around 250kt in 2009/10 to 800kt in 2016.
Plant capacity: 400 Mt/DayPlant & machinery: 2613 lakhs
Working capital: -T.C.I: Cost of Project: Rs 5581 lakhs
Return: 27.00%Break even: 72.00%
Add to Inquiry Add to Inquiry Basket

Power Transformer

A transformer is a device that transfers electrical energy from one circuit to another through inductively coupled conductors—the transformer's coils. A varying current in the first or primary winding creates a varying magnetic flux in the transformer's core and thus a varying magnetic field through the secondary winding. This varying magnetic field induces a varying electromotive force (EMF), or "voltage", in the secondary winding. This effect is called inductive. Transformers range in size from a thumbnail-sized coupling transformer hidden inside a stage microphone to huge units weighing hundreds of tons used to interconnect portions of power grids. A transformer is a device for transferring energy in a system from one circuit to another. It consists of two independent electric circuits linked with a common magnetic circuit. This energy at low voltage may be transformed to energy at high voltage, or vice versa. In the like manner, current of a given value in one circuit may be transformed into current of another value in a different circuit. Transformers having more than one primary or secondary winding etc. Power transformers are devices that facilitate transfer of power between electrical networks of different voltages. The global power transformers market was estimated to be 11,352 units in 2013 and is expected to reach 16,994 units by 2020, at a CAGR of 5.9% from 2014 to 2020. In terms of revenue, the market is expected to grow from USD 18.55 billion in 2013 to USD 28.22 billion in 2020 at a CAGR of 6.2% from 2014 to 2020. India is known to be an active supplier of transformers to nations worldwide. According to recently published TechSci Research report "India Power and Distribution Transformers Market Forecast and Opportunities, 2020" the market for power and distribution transformers in India is projected to grow at a CAGR of 10.5% during 2015-20. Transformer Market in India had estimated that over 400 GVA of transformer capacity out of the total installed capacity of 1040 GVA would require repair/retrofit/ replacement (as of 2012) and the number is slated to increase to 1548 GVA by 2020 out of estimated installed base of 1548 GVA. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under • Aditya Vidyut Appliances Ltd. • Alfa Transformers Ltd. • Altair Electronics Ltd. • Apex Electricals Ltd. • B R G Energy Ltd. • Bharat Bijlee Ltd. • Calcom Vision Ltd.
Plant capacity: Power Transformer(132/33 KV, 50 MVA Core Type Oil Cooled): 50 Nos. /annumPlant & machinery: 224 lakhs
Working capital: -T.C.I: Cost of Project:1043 lakhs
Return: 29.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

Polymer Pencil

A pencil is a writing instrument or art medium constructed of a narrow, solid pigment core inside a protective casing which prevents the core from being broken and/or from leaving marks on the user’s hand during use. Most pencil cores are made of graphite mixed with a clay binder which leaves grey or black marks that can be easily erased. Polymer graphite's superior mechanical property allows for a wide variety of sizes for mechanical pencils, 0.3mm, 0.5mm, 0.7mm, and 0.9mm being commonly available. Graphite pencils are used for both writing and drawing and result in durable markings. According to the different grades, there is a variety of HB, B, 2B, 3B, 4B, 5B, 6B, 7B, 8B, 9B, and 10B. Writing, drawing, sketching, coloring and shading is the basic applications of the wooden pencil. The market for writing instruments in India is estimated at 1600 to 2400 million pieces a year. The total market for writing instruments is estimated at Rs 22 billion in value and is growing at around 8 to 10% annually. Major Indian players in the ballpoint pen market are Cello, Lexi, Reynolds, Luxor, Flair, Montex, Todays, Linc and so on. Out of these, Cello, Lexi and Reynolds have a major share of the market. There is a growing demand of polymer pencil in the market. The products find application in schools, colleges, government offices, commercial establishments, NGOs and miscellaneous activities. According to the type of carbon used, pencils are classified as soft, medium and hard. There is no doubt about the acceptability of the product and lead pencils still command a respectful demand. The product has a good export potential also. Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian major players are as under • Add Pens Pvt. Ltd. • Excella Pencils Ltd. • Hindustan Pencils Pvt. Ltd. • Luxor Writing Instruments Pvt. Ltd. • Model Sales Agency Ltd. • Ravlon Pen Co. Ltd. • Reynolds Pens India Pvt. Ltd.
Plant capacity: 67 Th. Pcs. /dayPlant & machinery: 116 lakhs
Working capital: -T.C.I: Cost of Project: 282 lakhs
Return: 27.00%Break even: 71.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 39 of 249 | Total 2486 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 39 248 249   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top