Google Search

Search

Already a Member ?

Best Business Opportunities in Karnataka- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Steel industry: Project Opportunities in Karnataka

 

PROFILE:

Steel Industry is a booming industry in the whole world. The increasing demand for it was mainly generated by the development projects that have been going on along the world, especially the infrastructural works and real estate projects that has been on the boom around the developing countries. India’s economic growth is contingent upon the growth of the Indian steel industry. Consumption of steel is taken to be an indicator of economic development. While steel continues to have a stronghold in traditional sectors such as construction, housing and ground transportation, special steels are increasingly used in engineering industries such as power generation, petrochemicals and fertilisers. India occupies a central position on the global steel map, with the establishment of new state-of-the-art steel mills, acquisition of global scale capacities by players, continuous modernisation and up gradation of older plants, improving energy efficiency and backward integration into global raw material sources.

RESOURCES:

Karnataka is the 3rd largest producer of steel in India with a current production level of 10.70 Million Tons per annum. Both alloy and non-alloy steel are produced and the product range includes basic steels like pig iron and sponge iron, ingot, blooms, billets, slabs, finished products like long products CTD & TMT (bars & rods), wire rod, sections, bright bars, CR/HR coils. The export of steel from Karnataka is around 0.96 Million Tons.

It is one among 6 major steel producing states. Karnataka is the 2nd largest in the country in terms of iron ore reserves and largest exporter of iron ore in the country. Hence, it can share more than 40% of the steel demand in India which is estimated as 124 million tons by 2011-12 and 50% of the exports of finished steel products. Based on this estimate, Karnataka can host a manufacturing steel base for more than 100 million tons capacity per annum.

GOVERNMENT POLICIES:

Under the new industrial policy, iron and steel has been made one of the high priority industries. Price and distribution controls have been removed  as well as foreign direct investment up to 100% (under automatic route) has been permitted.  The Trade Policy has also been liberalized and import and export of iron and steel is freely allowed with no quantitative restrictions on import of iron and steel items. Tariffs on various items of iron and steel have drastically come down since 1991-92 levels and the government is committed to bring them down to the international levels.  With the abolishing of price regulation of iron and steel in 92, the steel prices are market determined. The policy devises a multi-pronged strategy to achieve these targets with following focus areas; removal of supply constraints especially availability  of critical inputs like iron ore; improve cost competitiveness by expanding and strengthening the infrastructure in roads, railways, ports and power; increase exports; meet the additional capital requirements by mobilizing financial resources; promote investments by removing  procedural delays. In addition the policy also addresses challenges arising out of environmental concerns, human resource requirements, R&D, volatile steel prices and the secondary sector. 

 

Food processing: Project Opportunities in Karnataka

 

PROFILE:

India is the world's second largest producer of food next to China, and has the potential of being the biggest with the food and agricultural sector. The Indian food processing industry stands at $135 billion and is estimated to grow with a CAGR of 10 per cent to reach $200 billion by 2015. The food processing industry in India is witnessing rapid growth. In addition to the demand side, there are changes happening on the supply side with the growth in organised retail, increasing FDI in food processing and introduction of new products. India's food processing sector covers fruit and vegetables; meat and poultry; milk and milk products, alcoholic beverages, fisheries, plantation, grain processing and other consumer product groups like confectionery, chocolates and cocoa products, Soya-based products, mineral water, high protein foods etc.

 

RESOURCES:

Karnataka is poised to become the leading food processing hub in India. Clearly, the food processing industry is on the threshold of demand-led growth in the country and within the state of Karnataka. It says Karnataka boasts of specific supply strengths, giving the state a comparative advantage to become a leading food processing hub of the country. With 10 agro-climatic zones and land topography highly suitable for agriculture, Karnataka is one of the most agriculturally diverse states in India. It is estimated that about 83 per cent of the geographic area of the state is suitable for agriculture, of which 64.60 per cent is under agricultural cultivation. Consequently, Karnataka is the largest producer of ragi, sunflower, tomato, coffee and arecanut and the second largest producer of maize, safflower, grapes, pomegranate and onion. The state is also the largest producer of spices, aromatic and medicinal plants in the country. In addition, the state has a wealth of livestock and marine resources that augur well for processing of dairy, meat, fish and shrimp. Karnataka, the report points out, also takes pride in having a strong and expanding infrastructure base for setting up food processing facilities in the state.

GOVERNMENT POLICIES:

The promotion of Agro-based industries is among the priorities of the State Government. The state has assured supply of fruits & vegetables grown by applying scientific techniques, investment in post harvest and good transport infrastructure. The National Horticulture Mission (NHM) in the Jharkhand State was launched in late 2005-06 initially in 10 districts with main focus on production of planting materials, vegetable seed production, establishment of new gardens, creation of water resources etc. Establishment of new gardens include perennial and non perennial fruits, spices, floriculture, aromatic and medicinal plants. This scheme was 100 % sponsored by Central Govt. during 2005-06 and 2006-07 (Xth Five Year Plan). However, during 2007-08 and onwards (XIth Five Year Plan) this scheme has been implemented in 15 districts with the pattern of assistance as 85:15 by Central Govt. and State Govt. respectively. The Jharkhand government has decided to set up a food park to kick off the development of the food processing sector in the state and attract investors. In general very few small scale food processing industries are present in the state.

Textile: Project Opportunities in Karnataka

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world

RESOURCES:

In Karnataka, the Textile Industry occupies a unique position in the economy of the state in terms of its contribution to industrial production, employment and exports. The textile sector contributes 0.50% of the GDP of the State. Karnataka under its Textile Policy of 2008-13 has planned to get investment worth Rs 9000 crore. Forty percent of such investments are planned to be directed towards the garment industry. The Karnataka government will establish fashion hubs and assist in market development and brand building. Specific incentives are also provided, like entry tax reimbursement, stamp duty reimbursement, up to 25% waiver on land acquisition charges, subsidy on power and capacity building support.

 

 

GOVERNMENT POLICIES:

The Ministry of Textiles in India has formulated numerous policies and schemes for the development of the textile industry in India. The government of India has been following a policy of promoting and encouraging the handloom sector through a number of programmes. Most of the schematic interventions of the government of India in the ninth and tenth plan period have been through the state agencies and co-operative societies in the handloom industries. Some of the major acts relating to textile industry include: Central Silk Board Act, 1948, The Textiles Committee Act, 1963, The Handlooms Act, 1985, Cotton Control Order, 1986, The Textile Undertakings Act, 1995Government of India is earnestly trying to provide all the relevant facilities for the textile industry to utilize its full potential and achieve the target. The textile industry is presently experiencing an average annual growth rate of 9-10% and is expected to grow at a rate of 16% in value, which will eventually reach the target of US $ 115 billion by 2012. The clothing and apparel sector are expected to grow at a rate of 21 %t in value terms.

 

Biotechnology: Project Opportunities in Karnataka

PROFILE:

The Biotechnology sector in India is one of the fastest growing sectors of the Indian Economy. As the sector is mainly based on knowledge, it is expected that it will play an important part in shaping the Indian Economy, which is developing at a rapid pace. The Indian Biotechnology sector holds immense potential in terms of research and development, skill and cost effectiveness.

RESOURCES:

Karnataka has successfully attracted the BioTech industry. Bengaluru, Karnataka is the capital for Biotech clusters in the country. Bangalore currently houses 92 of India's 180 biotech companies, with total actual investments of over Rs 1,000 crore, of which Rs 140 crore has been venture capital funding. The companies are encouraged to invest thanks to the presence of large R&D institutions like Indian Institute of Science and the National Centre for Biological Resources. However, it is sure to face a lot of competition from media savvy Hyderabad. Bangalore Helix is a biotech cluster being planned by the Karnataka government. Bangalore Helix would support biotech units with common infrastructure. It would comprise eight biotech incubators, covering a total area of 10,000 square feet. Excluding the cost of land (around Rs 60 crore) that has already been acquired, the cluster will involve an investment of Rs 100 crore. The infrastructure support would be comprehensive, right from advance computing facilities to treated water necessary for biotech infrastructure services.

GOVERNMENT POLICIES:

·         The Karnataka government has announced a biotech policy to promote this sector and is setting up an institute for bioinformatics in Banglore.

• In addition the state government is also creating a biotechnology fund that will have inflows from the biotech companies. This could be used for incubation of new projects and promotion of the sector in the state.

• Karnataka government is putting in Rs. 50 million and an equal amount is being brought by ICICI to develop the institute if bioinformatics in Banglore. Karnataka has planned to launch India's first state sponsored biotechnology venture capital fund to boost their initiatives.

·         Three 'biotech parks' are emerging in the state , namely 'university of Agricultural Sciences, Banglore; 'Institute of Agri-biotech in Dharwad ; and Institute of Biotechnology in Karwar.

 

 

 

Automobile: Project Opportunities in Karnataka

 

PROFILE:

The automotive industry in India is one of the largest in the world and one of the fastest growing globally. India's passenger car and commercial vehicle manufacturing industry is the seventh largest in the world, with an annual production of more than 3.7 million units in 2010. Automotive industry is the key driver of any growing economy. It plays a pivotal role in country's rapid economic and industrial development. It caters to the requirement of equipment for basic industries like steel, non-ferrous metals, fertilisers, refineries, petrochemicals, shipping, textiles, plastics, glass, rubber, capital equipments, logistics, paper, cement, sugar, etc. It facilitates the improvement in various infrastructure facilities like power, rail and road transport. Due to its deep forward and backward linkages with almost every segment of the economy, the industry has a strong and positive multiplier effect and thus propels progress of a nation. The automotive industry comprises of the automobile and the auto component sectors.

RESOURCES:

Auto industry is the second fastest growing sector in Karnataka, the automobile and auto component sector has maintained a 15 per cent growth in Karnataka. There is a huge potential of development in the sector of automobiles in Karnataka. The component industry caters to the OEMs (all kinds of automobiles like trucks, cars, SUVs, LCVs, buses, two-wheelers, tractors etc.,) and exports. Termed a priority sector, auto and auto parts hold the key to economic growth of the state.

GOVERNMENT POLICIES:

Government brought out a very innovative Policy "Ultra Mega Policy for Integrated Automobile Projects" that offers a very attractive package of support to automobile projects investing more than Rs.4000 Crores. As a result of this Policy, since May 2006, investments attracted by Tamil Nadu is automobiles & components manufacturing is Rs.21900 Crores, almost 5 times of the Investments attracted during previous 15 years (May 1991-April 2006). The total employment potential in these new projects is: 1.20 lakhs (direct + Indirect). Govt of India is currently implementing a project "National Automotive Testing R&D Infrastructure Project" (NATRIP) in Oragdam near Chennai at a project cost of about Rs.450 Crores. This project aims at facilitating introduction of world-class automotive safety, emission and performance standards in India as also ensure seamless integration of our automotive industry with the global industry.

 

 

Mineral: Project Opportunities in Karnataka

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

 

RESOURCES:

Karnataka is rich in its mineral wealth which is distributed fairly evenly across the state. Karnataka's Geological Survey department started in 1880 is one of the oldest in the country. Rich deposits of asbestos, bauxite, chromite, dolomite, gold, iron ore, kaolin, limestone, magnesite, Manganese, ochre, quartz and silica sand are found in the state. Karnataka is also a major producer of felsite, moulding sand (63%) and fuchsite quartzite (57%) in the country.

Karnataka has two major centers of gold mining in the state at Kolar and Raichur. These mines produce about 3000 kg of gold per annum which accounts for almost 84% of the country's production. Karnataka has very rich deposits of high grade iron and manganese ores to the tune of 1,000 million tonnes. Most of the iron ores are concentrated around the Bellary-Hospet region. Karnataka with a granite rock spread of over 4200 km² is also famous for its Ornamental Granites with different hues.

 

GOVERNMENT POLICIES:

The  role to be played by the Central and State Governments in  regard  to  mineral  development has  been  extensively  dealt in  the  Mines  and Minerals (Development and Regulation)  Act, 1957  and Rules  made under the Act by  the  Central  Government and  the  State  Governments in their  respective  domains.   The provisions  of  the  Act  and the Rules  will  be  reviewed  and  harmonised  with  the basic features of the new  National Mineral  Policy.  In future the core functions of the State in mining will be facilitation and regulation of exploration and mining activities of investors and entrepreneurs, provision of infrastructure and tax collection.  In mining activities, there shall be arms length distance between State agencies (Public Sector Undertakings) that mine and those that regulate.  There shall be transparency and fair play in the reservation of ore bodies to State agencies on such areas where private players are not holding or have not applied for exploration or mining, unless security considerations or specific public interests are involved. Recently, the Union Government after reviewing the current mining sector, mineral development and keeping in view the availability of the valuable finite resource have announced the National Mineral Policy (NMP))- 2010. Research organisations, including the National Mineral Processing Laboratories of the Indian Bureau of Mines should be strengthened for development of processes for beneficiation and mineral and elemental analysis of ores and ore dressing products. There shall be co-operation between and co-ordination among all organisations in public and private sector engaged in this task.

 

Waste management: Project Opportunities in Karnataka

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

As regards municipal waste on an average 40 to 50 % of the total municipal waste is generated in the sic municipal corporation of Karnataka & more than 70 % of municipal waste is generated by the residential & market areas. The domestic waste generated by households comprises mainly of organic, plastic & paper waste & small quantities of the waste. Plastic & glass are segregated at the household level or by rag pickers and sold. The remaining waste is disposed in community bins, discarded ointments and medicine. In addition about 1 to 2% of biomedical waste also gets mixed with municipal solid waste in the community bins.

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 24 of 297 | Total 2970 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 24 296 297   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Dolomite Bricks - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Refractories are necessary in the metallurgical, cement, glass, and machine tools industries where kilns and furnaces are used for value addition process to materials. Dolomite refractories are currently in use in some countries such as China, France, England India etc. Dolomite refractories have wide applications in the steel industry where it is used in open hearth, basic oxygen converters and other steel refining systems. Dolomite is environmentally friendly and can be used for the production of pure and extra low carbon steels. Dolomite that is ceramically bonded exhibit high hot erosion resistance. Good quality dolomite, with low silica content is thermo dynamically stable and has a significantly high heat sink characteristics. These qualities make dolomite refractory preferable to silica, alumina and even magnesite chrome refractories. Dolomite mineral is a double carbonate of calcium and magnesium having the formula CaMg [CO3M4]. It is slightly hard, transparent, and forms rhombohedronas its typical crystal habit. Dolomite used for refractory purpose should be hard and compact with uniform texture containing very low percentages of iron, silica, alumina etc. Few Indian Major Players are as under • Aditya Lime Inds. Ltd. • Bisra Stone Lime Co. Ltd. • Century Plyboards (India) Ltd. • Essel Mining & Inds. Ltd. • Femnor Mineral (India) Ltd. • Kohinoor Steel Pvt. Ltd. • M M T C Ltd. • Maharashtra State Mining Corpn. Ltd. • Mahavir Minerals Ltd. • C L India Ltd. • Rashmi Cement Ltd. • Trimex Industries Pvt. Ltd.
Plant capacity: Dolomite Bricks:100 MT/DayPlant & machinery: Rs 1138 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 1770 Lakhs
Return: 26.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Reclamation of Used Engine Oil by Alkali Refining Process(Caustic Soda)

Huge amounts of used lubricating oils from automotive sources are disposed of as a harmful waste into the environment. The cost and availability of oil and its products will significantly impact our quality of life, the stability of our environment, the health of national economies and even the relationships between nations. Now-a-days engine oil has become an important factor for automobile and other purposes and since the prices of all petroleum products have gone up, it has become extremely necessary to refine used engine oil which could be reused as original. Engine oil becomes contaminated with foreign material in service. In circulating systems, where a substantial quantity of oil is involved, it is desirable to maintain it as clean as possible to provide maximum working efficiency and to keep wear and damage of lubricated parts to a minimum. Reconditioning of used oil may be accomplished by a continuous by pass or batch methods or combination of these. In the continuous system the entire amount of the oil from main pressure line is continuously filtered. In the bypass system a fraction of the total is continuously filtered. Lubricating oil are used to reduce friction on our engine, protection against wear and tear, dust, carry away heat and prevent contamination. Over a period of time, properties of lubricating oils are adversely affected by contamination that we tend to prevent such as: soot, water, acids, dirt and fuel. The lubricating oil and grease market in India is of the order of about 4.6 mn tonne and is growing at around 4.5% annually. The moderate growth is paradoxically due to the supply of better quality of lubricants which have longer servicing capability. Therefore it is a good project to invest.
Plant capacity: Reclaimed Engine Oil :5000 Litres/DayPlant & machinery: Rs 49 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 161 Lakhs
Return: 26.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Wheat Flour - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Wheat is grown in most parts of the world, from near-arctic to near-equatorial latitudes. It is the most important crop among the cereals by area planted and is followed in importance by corn, barley and sorghum. The amount of wheat traded internationally exceeds that of all other grains. Furthermore, the protein and caloric content of wheat is greater than that of any other food crop. Most wheat is consumed in the form of baked goods, mainly bread; therefore, wheat grains must be milled to produce flour prior to consumption. Wheat is also used as an ingredient in compound feedstuffs, starch production and as a feed stock in ethanol production. The purpose of the milling process is to break up the grains of wheat into flour (which comes from the centre of the grain, or endosperm), bran (the skin of the wheat), and pollard (the dusty material created during the grinding process).Whole meal flour is a blend of flour, bran and pollard in the proportions in which they occur in the grain. Wheat flour is a powder made from the grinding of wheat used for human consumption. More wheat flour is produced than any other flour. Wheat varieties are called "clean," "white," or "brown" if they have high gluten content, and they are called "soft" or "weak" flour if gluten content is low. Hard flour, or bread flour, is high in gluten, with 12% to 14% gluten content, and has elastic toughness that holds its shape well once baked. The flour milling industry is growing tremendously with rapid speed and that gives the chance to new entrepreneur to establish their start up unit. Few Indian Major Players are as under • Ambe Agro Inds. Ltd. • Ambuja Flour Mills Ltd. • Anirudh Foods Ltd. • Ankit India Ltd. • Annamallai Industries Ltd. • Aruppukottai Shri Ramalinga Roller Flour Mills Ltd. • Bannari Amman Flour Mill Ltd. • Brindavan Roller Flour Mills Ltd. • Century Flour Mills Ltd. • Delhi Flour Mills Co. Ltd. • Flour & Food Ltd. • Himanshu Flour Mills Ltd. • Jai Mata Foods Ltd. • K L R F Ltd. • Modern Flour Mills Pvt. Ltd. • Parakh Agro Inds. Ltd. • Patiala Flour Mills Co. Ltd. • Puja Food Products Ltd. • S K Roller Flour Mills Ltd. • Sakthi Murugan Agro Foods Ltd. • Shakti Bhog Foods Ltd. • U F M Industries Ltd. • Vrundavan Agro Inds. Ltd. • Zest Gartex Ltd.
Plant capacity: 150 MT/DayPlant & machinery: Rs 385 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 904 Lakhs
Return: 27.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Garlic Oil and Powder - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Garlic is one of the important bulb crops grown and used as spice and condiment throughout India. It possesses a high nutritive value and medicinal property. Allicin, the principle of garlic has antibiotic properties. The plant is a small herb and produces a group of small bulbs called cloves covered with a thin skin. The seed stalks bears both seeds and bulblets in the same head. However, seed is seldom used for propagation as the cloves are more commonly used. Oil is one of the three major classes of food substances; the others are protein and carbohydrates. Garlic oils are naturally occurring esters of glycerol and fatty acids that have commercial uses, some oils are called trimester examples are triglycerides or simple glycerides. The physical and chemical properties of garlic oilsare determined to a large extent by the type of fatty acids in the glycerides. In all commercially important glycerides, the fatty acids are straight chain and nearly all contain even number of carbon atoms. Garlic is taken orally to reduce high blood pressure, prevent heart disease and artherosclerosis, treat earaches, stimulate both the immune and circulatory systems and prevent cancer. Other applications include treating diabetes, arthritis, colds and flu, fighting stress and fatigue and maintaining healthy liver function. Garlic also contains protein and the B vitamins thiamin and riboflavin, and trace minerals such as zinc, tin, calcium, potassium, aluminium, germanium, selenium and of course, sulfur. The increasing importance of natural extracts as pharmaceutical & natural cosmetic aid and their use as nutraceutical ingredients in recent times has opened up new vistas for this sector besides their widespread use as flavour & fragrance ingredients. India will play a dominant role in the production & processing of these natural extracts. Country's biodiversity coupled with competent scientific force, make our country as the best choice to become a foremost leader in aroma business in the coming years. Thus it is a good project for investment. Few Indian Major Players are as under • Aarkay Food Products Ltd. • Absolute Aromatics Ltd. • Aico Foods Ltd. • Basil Chemicals & Additives Ltd. • Bhagat Aromatics Ltd. • Concert Spices & Exports Ltd. • Enjayes Natural Flavours Ltd. • Enjayes Spices & Chemical Oils Ltd. • Kancor Ingredients Ltd. • Keva Biotech Pvt. Ltd. • Privi Organics Ltd. • R K S Agrotech Ltd. • S H Kelkar & Co. Ltd. • Sharp Global Ltd. • Sijmak Oils Ltd. • South East Agro Inds. Ltd. • Tamilnadu Forest Plantation Corpn. Ltd.
Plant capacity: Garlic Oil :10 Kgs/ Day •Garlic Powder:2 MT /DayPlant & machinery: Rs 58 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 241 Lakhs
Return: 25.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

4 Star Hotel -Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project, Break Even Analysis

One of the fastest growing sectors of the economy of our time is the hotel industry. The hotel industry alone is a multi-billion dollar and growing enterprise. It is exciting, never boring and offer unlimited opportunities. The hotel industry is diverse enough for people to work in different areas of interest and still be employed within the hotel industry. This trend is not just in India, but also globally. Modern hotels provide refined services to their guests. The customers or guests are always right. This principle necessitated application of management principles in the hotel industry and the hotel professionals realized the instrumentality of marketing principles in managing the hotel industry. Hotel is an establishment that provides lodging and usually meals and other services for travellers and other paying guests. It provides paid lodging, usually on a short-term basis. Hotels often provide a number of additional guest services such as a restaurant, laundry, a swimming pool or child care. Some hotels have conference services and meeting rooms and encourage groups to hold conventions, functions and meetings at their location. Hotels are found in almost all the cities. Hotels operate twenty four hours a day, seven days a week. The principal factor that determines the guest attitude towards a hotel is service although other amenities such as room, food and beverages are of equal importance a tangible determinants. Few Indian Major Players are as under • 18Th Step Resorts Pvt. Ltd. • Advani Hotels & Resorts (India) Ltd. • Adyar Gate Hotels Ltd. • Alankar Business Corpn. Pvt. Ltd. • Balaji Amines Ltd. • Bekal Resorts Devp. Corpn. Ltd. • Benares Hotels Ltd. • Best Eastern Hotels Ltd. • Bona Sera Hotels Ltd. • Budget Hotels Ltd. • Chalet Hotels Pvt. Ltd. • Express Resorts & Hotels Ltd. • Jungle Lodges & Resorts Ltd. • Mayank Hotels Ltd. • Neotech Solutions & Securities Ltd. • Oasis Hotels Ltd. • Om Metals Infraprojects Ltd. • Pai Vaibhav Hotels (India) Pvt. Ltd. • Prajay Engineers Syndicate Ltd. • Presidency Leisure Ltd. • Ras Resorts & Apart Hotels Ltd. • Sahara Hospitality Ltd.
Plant capacity: 30 Rooms,20 Cottage,Conference Hall & Swimming Pool Plant & machinery: Rs 162 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 988 Lakhs
Return: 27.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Laminated Particle Board - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Particle board is defined as a panel product manufactured from lignocellulosic materials, primarily in the form of discrete particles, combined with a synthetic resin or other suitable binder and bonded together under heat and pressure. The primary difference between particle board and other reconstituted wood products, such as wafer board, oriented strand board, medium density fiber board, and hard board, is the material or particles used in its production. The major types of particles used to manufacture particle board include wood shavings, flakes, wafers, chips, sawdust, strands, slivers, and wood wool. The term particle board sometimes is used generically to include wafer board and oriented strand board, which are manufactured primarily with wood flakes and wafers. However, for the purposes of this report, particle board pertains only to panels manufactured from a mixture of wood particles or otherwise from wood particles other than wafers and flakes. Particle board provide an ideal base for a wide variety of surface treatments. Apart from clear finishes and paints these include wood veneers, high and low pressure laminates, papers, PVC film and fabrics. Particle board is cheaper, denser and more uniform than conventional wood and plywood and is substituted for them when appearance and strength are less important than cost. However, particle board can be made more attractive by painting or the use of wood veneers onto surfaces that will be visible. Though it is denser than conventional wood, it is the lightest and weakest type of fiberboard, except for insulation board. Medium-density fiber board and hardboard, also called high-density fiberboard, are stronger and denser than particle board. Few Indian Major Players are as under • Archidply Industries Ltd. • Bajaj Eco-Tec Products Ltd. • Bajaj Hindusthan Sugar Ltd. • Century Plyboards (India) Ltd. • Ecoboard Industries Ltd. • Feroke Boards Ltd. • Genus Paper Products Ltd. • Kitply Industries Ltd. • Madras Chipboard Ltd. • N C L Industries Ltd. • Rushil Decor Ltd. • Shirdi Industries Ltd. • Western India Plywoods Ltd.
Plant capacity: 1000 Nos/ DayPlant & machinery: Rs 167 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 506 Lakhs
Return: 28.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

Honey Processing - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Honey is a natural product produced by honeybees and consists of a very concentrated solution of a complex mixture of sugars, in which fructose and glucose are the main ingredients. It is the natural sweet substance produced by honey bees from the nectar of flowers. It is also produced from blossoms or secretions of living parts of plants or excretions of plant sucking insects, however, honeybees collect, transform and combine nectar with specific substances of their own, store and leave in the honey comb to ripen and mature. Bees produce blossom honeys from nectar and honeydew honey from honeydew. Honeydew is the product of small plant sucking insects. ? Honey is used as a flavoring agent in honey cakes and gateaux. Its flavor which is distinctive varies with the type of vector. The different flavors are the result of characteristic aroma of flowers from which the nectars are gathered. It is the comb-honey that is stored by the bees in the cells of the wax honeycomb. Honey removed from the honeycomb is by centrifugal force and thus honey called extracted honey. Honey is a functional food and has different biological properties such as antibacterial (bacteriostatic properties), anti-inflammatory, wound and sunburn healing, antioxidant, radical scavenging, anti diabetic and antimicrobial activities. Honey industry in the country can well become a major foreign exchange earner if international standards are met. Beekeeping is an age-old tradition in India but it is considered a no-investment profit giving venture in most areas. Of late it has been recognized that it has the potential to develop as a prime agri-horticultural and forest-based industry. Honey production is a lucrative business and it generates employment.
Plant capacity: 1000 Kgs/ DayPlant & machinery: Rs 16 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 126 Lakhs
Return: 27.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Polyethylene Wax - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Waxes are among the oldest worked materials used by humans. Their value as versatile construction materials (man's first plastic) was discovered very early. Today, waxes are used mostly as additives and active substances. The use of waxes is expected to increase in the future because of their generally favorable toxicological and ecological properties. The word wax usually refers to a variety of organic substances that are solid at ambient temperature but become free-flowing liquids at slightly higher temperatures. The chemical composition of waxes is complex, but normal alkanes are always present in high proportion and molecular weight profiles tend to be wide. The main commercial source of wax is crude oil but not all crude oil refiners produce wax. Mineral wax can also be produced from lignite. Plants, animals and even insects produce materials sold in commerce as wax. Polyethylene is made in a polymerization reaction by building long molecular chains comprised of ethylene monomers, mostly by using catalysts. The type and nature of the catalysts are of great influence on the polymerization. As catalysts became more efficient, the polyethylene products became purer and more versatile and the production process became simplier and more efficient. Demand for polyethylene wax in India will go up in tune with the performance of the application sector. In view of the versatile applications of the product in diversified sector, the demand for PE wax is likely to go up steadily in the coming years. Considering the Indian demand and export opportunities, PE wax project can be favourably viewed in India for investment.
Plant capacity: 20 MT/ DayPlant & machinery: Rs 258 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 704 Lakhs
Return: 27.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Paint Industry (Decorative Paint & Acrylic Emulsion Paint) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Plant Layout

Paint is any liquid, liquefiable, or mastic composition that, after application to a substrate in a thin layer, converts to a solid film. It is most commonly used to protect, color, or provide texture to objects. Paint can be made or purchased in many colors—and in many different types, such as watercolor, synthetic, etc. Paint is typically stored, sold, and applied as a liquid, but dries into a solid. The binder is the film-forming component of paint. It is the only component that must be present if the binder material is suitable for application. Many binders are too thick to be applied and must be thinned. The type of thinner varies with the binder. The thinner is also called the vehicle, because it makes it possible to transfer the binder to the surface with a brush, roller or sprayer. Components listed below are included optionally, depending on the desired properties of the cured film. Paint can be applied as a solid, a gaseous suspension (aerosol) or a liquid. Techniques vary depending on the practical or artistic results desired. The decorative coatings have various applications such as interior and exterior house paints, primers, sealers, varnishes and stains. Industrial paints and coatings are used by several industries, including machinery manufacturing, automotive, and consumer goods. Based on their formulation, industrial paints and coatings can be segmented into four categories: water-based, solvent-based, powder, and UV-based. Few Indian Major Players are as under • Akzo Nobel India Ltd. • Arofine Polymers Ltd. • Asian Paints Ltd. • Bangalore Paints Ltd. • Beepee Coatings Pvt. Ltd. • Berger Paints India Ltd. • Godavari Paints Pvt. Ltd. • Jenson & Nicholson (India) Ltd. • Kansai Nerolac Paints Ltd. • Pelican Paints Ltd. • Rajdoot Paints Ltd. • Rich Paints Ltd. • Shalimar Paints Ltd. • Special Paints Ltd. • Tamil Nadu Paints & Allied Products Ltd.
Plant capacity: Decorative Paint:800 Kgs/Day •Acrylic Emulsion Paint:800 Kgs/DayPlant & machinery: Rs 96 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 303 Lakhs
Return: 24.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Acrylic Emulsion Paints - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Paint is used to decorate, protect and prolong the life of natural and synthetic materials, and acts as a barrier against environmental conditions. Paints may be broadly classified into Decorative paints, applied on site to decorate and protect buildings and other objects, and Industrial coatings which are applied in factories to finish manufactured goods such as cars. Paints contain: pigment(s) - prime pigments to impart color and opacity ;binder (resin) - a polymer, often referred to as resin, forming a matrix to hold the pigment in place; extender - larger pigment particles added to improve adhesion, strengthen the film and save binder; solvent (sometimes called a thinner) - either an organic solvent or water is used to reduce the viscosity of the paint for better application. Water-borne paints are replacing some paints that use volatile organic compounds such as the hydrocarbons which are harmful to the atmosphere; additives - used to modify the properties of the liquid paint or dry film. The binder (resin) and solvent together are sometimes known as the vehicle. The binder may be dissolved as a solution or carried as a dispersion of microscopically small particles in a liquid. Paints are formulated according to their proposed use - primer, undercoat, special finishes (matt, gloss, heat resistance, anti-corrosion, abrasion resistance). The pigment powder is broken down into individual particles which are coated by and dispersed in the binder (resin) - known as 'wetting out'. Solvent is then added to give the required consistency. Each batch of ingredients is thoroughly mixed in large, stirred containers with the required additives. Few Indian Major Players are as under • Akzo Nobel India Ltd. • Arofine Polymers Ltd. • Asian Paints Ltd. • Bangalore Paints Ltd. • Beepee Coatings Pvt. Ltd. • Berger Paints India Ltd. • Godavari Paints Pvt. Ltd. • Jenson & Nicholson (India) Ltd. • Kansai Nerolac Paints Ltd. • Pelican Paints Ltd. • Rajdoot Paints Ltd. • Rich Paints Ltd. • Shalimar Paints Ltd. • Special Paints Ltd. • Tamil Nadu Paints & Allied Products Ltd.
Plant capacity: Pure Acrylic Emulsion Paint :66 MT/Day •Styrene Acrylic Emulsion Paint :50 MT/Day •Vinyl Acrylic Emulsion Paint :50 MT/DayPlant & machinery: Rs 298 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 1874 Lakhs
Return: 28.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 24 of 297 | Total 2970 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 24 296 297   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top