Hot Dip Galvanizing Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost And Revenue
|Galvanized coatings are applied to iron and steel primarily to provide protection against corrosion of the basis metal. Hot Dip Galvanizing is a process in which an adherent, protective coating of zinc and zinc compounds is developed on the surfaces of iron and steel products by immersing them in a bath of molten zinc. The protective coatings usually consist of several layers. Those closest to the basis metal are composed of iron-zinc compounds these in turn are covered by an outer layer consisting almost entirely of zinc. The complex structure of layers that comprise a galvanized coating varies greatly in chemical composition and physical and mechanical properties, being affected by chemical activity, diffusion, and subsequent cooling. Small differences in coating composition, bath temperature, time of immersion, and rate of cooling or subsequent reheating can result in significant changes in the appearance and properties of the coating. Hot dip galvanized coatings are produced on a variety of steel mill products, using fully mechanized and mass production methods. Hot dip galvanized zinc coatings have their longest life expectancy in rural areas where sulfur dioxide and other industrial pollutant concentrations are low. These coatings also give satisfactory service in most marine environments. Although the life expectancy of hot dip galvanized coatings in more severe industrial environments is not as long as for less aggressive environments, the coatings are still used extensively in those exposures, because in general, no more effective and economical method of protection is available. India's steel pipe industry is primarily engaged in manufacturing seamless or welded steel pipes or tubes or ferrous metal pipes or tube fittings. Steel pipes are primarily of two types, seamless and welded. Other specific types extend the basic classification to include: (a) cast iron pipes, (b) stainless steel tubes, (c) ERW (electric resistance welding) steel pipes, (d) galvanized pipes, (e) API pipes, (f) SAW (submerged arc welded) pipes, and (g) spun pipes. Welded steel pipes include a wide variety of pipes and tubes. Welded pipes are normally manufactured from HR and CR coils by ERW. Galvanized pipes are zinc-coated to prevent corrosion. ERW tubes are meant for high performance applications, such as trusses and columns in housing, industrial and construction sectors, chassis for two-wheelers and light commercial vehicles, propeller shafts and axles. According to observation of engineering goods statistics, we can conclude about the essentiality of the galvanizing process as companys work or on the job work base. It can be concluded that galvanization process is partially proportional to the increase of demand of the engineering goods or most or ancillary item production the steel base. It can be concluded that demand of galvanizing industries will be increased 10% per annum. On that base it can be predicted that there is good scope for galvanizing industries as job work base.|
|Plant capacity: 3600 MT/Annum||Plant & machinery: 102 Lakhs|
|Working capital: -||T.C.I: Cost of Project : 378 Lakhs|
|Return: 44.00%||Break even: 54.00%|
|Email Us | Add to Inquiry Basket|
We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.
Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.Information
- One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
- One Crore is equivalent to ten million (10,000,000)
- T.C.I is Total Capital Investment
- We can modify the project capacity and project cost as per your requirement.
- We can also prepare project report on any subject as per your requirement.
- Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.
About NIIR PROJECT CONSULTANCY SERVICES
NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.
Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.
NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.
Products & Services