REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Investment Opportunities & Business Ideas in Qatar, Middle East - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 22 of 219 | Total 2184 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 22 218 219   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

TMT BARS (SARIYA) PROJECT - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Thermo Mechanical Treatment (TMT) process for reinforcement bars is opening up new vistas in composite RCC, the re-enforcing steel is the costliest constituent (30 to 40% Per Cu. M. of concrete). This cost can be substantially reduced by using higher grades of steel re-enforcing bars. The higher yield strength of re-bars lowers the steel requirement, which results in reduced cost of construction. In India, high strength re-bars of yield strength up to 500 N/sq. mm. are produced either by cold twisting or micro-alloying or a combination of both which adds considerably to the cost of the re-enforcement bars. During the last 30 years, high strength cold twisted deformed bars with yield strength of 415 MPa conforming to IS:1786/85 are widely produced and marketed in our country. These cold twisted bars, though in extensive use at present, continue to have inherent problem of inferior ductility, weld-ability and increased rate of corrosion. Production of re-bars by the addition of micro-alloys gives the desired results of high strengths but at a cost, which is prohibitive. The need for reduction in the steel used for concrete re-enforcement has prompted most countries to switch to re-bars of higher yield strengths of 500 and 550 MPa. The need for cutting down the cost of production of high strength re-bars has initiated the involvement of a more economical and competitive process – the Thermo Mechanical Treatment (TMT) Process. The use of Thermo Mechanical Treatment process has not only helped produce re-bars of high yield strength but also having superior ductility, wild-ability, bend-ability, better corrosion resistance and thermal resistance creating a revolution in re-enforcement engineering. The TMT bars are widely used in construction works such as high rise building, industrial structures, flyovers and bridges etc. The Indian iron and steel industry has come to occupy a dominant position in the socio-economic development of the country and it is certainly a matter of pride that India is the 7th largest crude steel-producing nation in the world. After having gone through the highs and lows of business cycles over time, today the Indian steel industry is on the threshold of a major change as it gears up to give substance to an expansion plan that is ambitious by any standard. Joining forces with the ‘Main Producers’ are the ‘Secondary Producers’ as well, whose emergence in the post-liberalized decade in the Indian steel scene had been initially modest but over the years, they have made a significant contribution to the growth of the domestic iron and steel industry, in terms of spread, capacity, production and commodity basket, necessitation thereby, a fresh look at the segment, traditionally labeled as the ‘Secondary’ Producers, under the Indian context. Steel production in India got a momentum with the announcement of the Industrial Policy Resolution of 1956 when three SAIL plants were set up in the public sector in the late 1950s and the fourth in early 1970. These plants along with IISCO (now, a part of SAIL), VISL and TISCO (now Tata Steel Ltd) were the only integrated steel producers till the eighties. Vizag Steel plant/RINL came into production in the early nineties. The 70s saw the emergence of the Secondary sector – small scale steel producers who opted for the scrap-DRI based electric arc furnace/induction furnace routes – to meet primarily local demand. The semi finished ingots/billets produced by this segment, in turn led to the commissioning of a large number of re-rolling units to convert the semi finished steel into bars and rods, to be used mainly by the construction industry. Moving over the Re-rolling segment, challenges include facing the market downs, specially prices and operational factors like high energy consumption. Prospect for future growth may be considered bright, given the pace and scale of infrastructure / construction activities. Such prospects are captured in the projections for the 11th Five Year Plan of the Government of India, which indicates that share of Secondary Producers in total crude steel production would rise from the present below-50% mark to 53% at the end-of the plan period, as the Secondary sector consolidates their position further. The Indian steel industry has ended 2006-07 on a buoyant note, in the backdrop of Indian economy, growing by a projected 9% growth rate. As the steel industry, including the foreign steel giants setting up steel plants in India, prepares to launch their dream projects, the future of steel in India is awaits a new chapter to be written – a phase which would in all likelihood would witness the Secondary Steel sector further increase their dominance and criticality in the overall operations of the Indian iron and steel industry. If we were to pause for a moment to think about the growth of human civilization, we would find that the pace of social and economic growth has been closely linked to the proficiency with which people have been able to use of shape materials. Steel is one of the critical inputs required to sustain the growth of the economy. In fact it is the basic input for all kinds of economic activity. With the sustained growth of the Indian economy, there has also been a remarkable growth of the Steel Industry. The growth of infrastructures, roads and bridges, civil construction projects, and modern town ship complexes will ensure continued demand of TMT bars.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Water Proofing Compound (Liquid and Powder) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

-
Plant capacity: 300 MT Liquid/year, 300 MT Powder/yearPlant & machinery: 19 Lakh
Working capital: -T.C.I: Cost of Project : Rs. 66.67 Lakhs
Return: 45.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

Alumina from Bauxite (By Calcination Process) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

-
Plant capacity: 66.66 MT/DayPlant & machinery: Rs. 671 Lakhs
Working capital: -T.C.I: Rs. 2112 Lakhs
Return: 46.00%Break even: 38.00%
Add to Inquiry Add to Inquiry Basket

Cement Roofing Tiles - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Roofs are basic element of shelter to protect the people themselves from cold, wind rain and sun. Tiles are thin slabs of baked clay used for construction of roofs, walls or floors. They may be plain or ornamented, and glazed or unglazed. Tiles are also made from marble, cement or plastic materials. The type and designs of tiles are many and they can be conveniently classified into two groups, namely, non roofing and roofing tiles. Roofing tiles made from plastic, clay are usually unglazed. They are of many designs of which the more popular are country, Mangalore, Raniganj, Allahabad, Ridge, ventilation, Sky-light, hourdis and valley. The manufacture of cement tiles are exclusively carried out by small medium scale sectors. The tile industry reoriented itself to changing pattern of internal demand by establishing several units, both in large and small scale sectors for manufacturing of roofing and non-roofing tiles in near future to patch up the gap between demand and supply so this industry is to main fold. The announcement made by govt. to build rural houses, for poor people, will definitely become the counterpart of it and which and should not be allowed to go waste by negligence, here important is that to bring about a change of heart and attitude of the people, inform them of the advisability of casing cement roofing tiles for their houses. Cement roofing tiles meet the styling, long lasting service combined with a flexibility that make this versatile roofing adaptable for residential houses, tiles will definitely push up the demand of cement roofing tiles, so there is wide scope of new entrepreneurs to venture into this project.
Plant capacity: 5000 Nos. /DayPlant & machinery: 39 Lakhs
Working capital: -T.C.I: 163 Lakhs
Return: 43.00%Break even: 43.00%
Add to Inquiry Add to Inquiry Basket

Forging Unit for Automobile Spare Parts - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

The forging industry as it known today, make use of various type of forging equipments for the practical duplication of forged part for commercial use services. The era of modern growth in India has its first foot print on automobile industry. New model of cars, scooter, buses etc not only provided increased oxygen to auto ancillary industry but to many industries like steel forging and casting, automobile, paint etc. However, the trend in steel forging is encouraging in the automobile industry in last ten years. Automobile Industry share 70% of consumption of steel forging. The remaining is consumed by other end use segment mainly by capital goods sector which manufacture machinery, turbine, electric motor etc. The current demand of direct and indirect consumption is estimated at 320 thousand tonnes. In automobile sector, all the vehicle requires forged product for steering, gear etc. It is understood that higher the gross weight of vehicle higher is consumption of steel in tonnage. Today on an average, a heavy and medium duty vehicle require around 300 kg whereas car and jeep require 150 kg. The demand of forged parts in automobile sector is very good, so there is wide scope for new entrepreneurs to venture into this project.
Plant capacity: 6 MT / DayPlant & machinery: 217 Lakhs
Working capital: -T.C.I: Cost of Project : 435 Lakhs
Return: 42.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

HOLLOW BLOCKS & PAVING TILES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Concrete block technology is based on the principle of densification of a lean concrete mix to make a regular shaped, uniform, high performance masonry unit. Concrete blocks are of various types like; hollow, paving, tree-guard blocks. Each of them is available in different shapes and sizes. Hollow block is an excellent replacement of clay blocks. The block masonry is load bearing and there are several advantages of using blocks. More importantly they are widely used in South India, more particularly in Bangalore, Chennai, Mumbai, and Ahmedabad. Paving tile is versatile, aesthetically attractive functional, cost effective and requires little or no maintenance if correctly manufactured and lay. Blocks had many advantages fire resistant, economical, highly durable etc. Due to increase in the price of clay bricks and quality of clay brick detoriating day by day, blocks are gaining popularity, so there will be wide scope for new entrepreneurs to venture into this project.
Plant capacity: 144 Lakhs Hollow Blocks/year, 288 Lakhs Paving Tiles/yearPlant & machinery: 598 Lakhs
Working capital: -T.C.I: Cost of Project : 1234 Lakhs
Return: 46.00%Break even: 34.00%
Add to Inquiry Add to Inquiry Basket

PVC / HDPE PIPES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

PVC/HDPE Pipes are produced by extrusion process followed by calibration to ensure internal diameter with smooth internal boxes. These pipes are generally come in lengths of 6 meter. A wide range of injection moulded fittings, including tee, elbow, reducers, caps, pipe saddler, insert and three adaptors for pipe sizes 15-150 mm are available. The PVC pipes are much lighter than cast iron or A.C. pipes. Because of their light weight properties, PVC pipes are easy to handle, transport and install. Solvent cementing techniques for jointing PVC pipes lengths is cheaper, efficient and simpler. PVC pipes are used widely in a variety of applications such as electric cable for residential buildings, household electrical appliances, cable coverings insulating tapes, switch boxes, wire covering and protecting tubes for power and telecommunications cable. Pipes made from Polyethylene (PE) is a cost effective answer for a number of piping problems in Metropolitan, Municipal, Industrial, Underwater, Mining, Landfill Gas extraction, Cable duct and agricultural applications. It has been tested and proven effective for underground, above ground, surface, under water as well as floating pipe applications. Polyethylene pipes both High Density (HDPE) and Medium Density (MDPE) can carry potable water, wastewater, slurries, chemicals, hazardous wastes, cables and compressed gases as well as oils. Polyethylene pipes have a long and successful service experience to the gas oil, mining and water utility industries. PE pipes have the lowest repair frequency per Kilometer of pipe per year compared with all other pipe materials used for urban water and gas distribution. The use of PVC/HDPE pipes is increasing rapidly, so there is wide scope for new entrepreneurs to venture into this project.
Plant capacity: 115000 Mtr/Annum PVC Pipes, 125000 Mtr/Annum HDPE PipesPlant & machinery: 292 Lakhs
Working capital: -T.C.I: Cost of Project : 640 Lakhs
Return: 45.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

TMT BARs (SARIYA) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Steel is a generic name for a group of ferrous metals due to their abundance, durability, versatility and low cost, are most useful metallic material known to mankind Thermo Mechanical Treatment (TMT) process for reinforcement bars is opening up new vistas in composite RCC; the re-enforcing steel is the costlier constituent .The TMT bars are widely used in construction works such as high rise building, industrial structure, flyovers and bridges etc. The Indian iron and steel industry has come to occupy a dominant position in the socio-economic development of the country and it is certainly matter of pride that India is the 7th largest crude steel producing nation in the world. The industry continues to be fragmented with top 5 players ,today Arcelor (Europe ) is the largest producer of the world followed by LNM- Ispat group, Nippon steel, Jee holdings ,Pasco and Shangai. The growth of infrastructure, road and bridges, civil construction projects and modern town ship complexes will ensure continued demand of TMT Bar. There is wide scope for new entrepreneurs to venture into this project
Plant capacity: 480 M.T/dayPlant & machinery: 332 Lakhs
Working capital: -T.C.I: Cost of Project: 1949 Lakhs
Return: 42.00%Break even: 76.00%
Add to Inquiry Add to Inquiry Basket

Oxygen and Nitrogen Gas Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Oxygen and nitrogen are the most important industrial gases finding its application in large quantities in metal fabrication and cutting industries. It is used in electric arc steel furnaces for decarbonisation and scrap matting. Oxygen is also used in medical treatment and for breathing at high altitude flying. Some quantities of liquid oxygen are used in explosives, chemicals and petrochemicals industries as an oxidizing and catalytic agent. As the quantity of oxygen required in integrated steel plants is huge, the excess of oxygen is compressed and bottled in steel cylinders and supplied to engineering industries such as manufacture of machine tools, industrial machinery, automobiles and component manufacturers, fabricators of chemical plants, storage tanks, and furniture and building elements. Nitrogen gas is used in the production of ammonia which in turn is used for the manufacture of urea and ammonium phosphate, which are fertilizers of great use. Nitrogen gas is used for blanketing hazardous chemicals which is an inert atmosphere. Nitrogen gas is used for purging purposes. Nitrogen gas is used for the purification of other gases with extremely low boiling points, such as hydrogen scrubbing. High purity nitrogen is used in strip steel annealing prior to tin plating. Human blood and cattle sperm cells are pressured by using nitrogen liquid freezing method. Large quantities of liquid nitrogen are employed in the preservation of food by rapid freezing. Liquid nitrogen is also used to maintain low temperatures during the transportation of frozen food. The demand of oxygen and nitrogen gas will increase in future, so new entrepreneurs may venture into this project
Plant capacity: 1200 Cubic Meter/DayPlant & machinery: 21 Lakhs
Working capital: -T.C.I: 68 Lakhs
Return: 40.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Steel Bars (Saria) Size 6 mm to 32 mm - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

-
Plant capacity: 3000 MT/AnnumPlant & machinery: Rs. 332 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 533 Lakhs
Return: 44.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 22 of 219 | Total 2184 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 22 218 219   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top