Google Search

Search

Already a Member ?

Investment Opportunities & Business Ideas in Qatar, Middle East - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 6 of 159 | Total 1590 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 158 159   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Water Park - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project, Profitability Ratios

Plant capacity: 2500 visitor/dayPlant & machinery: 55 Lakhs
Working capital: -T.C.I: Rs. 182 LAKHS
Return: 20.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Seamless M. S. Tubes & Pipes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Seamless M. S. pipes and tubes products may be made better or electric welding formed skelp, piercing, extrusion. Piercing and extrusion methods are used for seamless tubing which is used in high-temperature and pressure applications as well as for transporting gas and chemical liquids. Seamless steel pipe up to 400 mm in diameter has been manufactured. Extruded tubes are also used for gun barrels, since the process can be adapted to internal configurations such as rifling and grooves. But welded pipe is the most common and is used for structural purposes, posts and for conveying gas, water and wastes etc. The electric welded pipe is used primarily for pipelines carrying petroleum produces for water. There will be bright future for new entrepreneurs or the expansion of the existing
Plant capacity: 800 Kg/DayPlant & machinery: 8 Lacs
Working capital: 24 LacsT.C.I: 56 Lacs
Return: 21.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Steel Structural - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

The importance of iron and steel among other materials is well known for industrialization and national economy. Basically all industries depend on iron & steel for their structural, machinery & raw material requirements. Metal fabrication is the group of entire process employed to shape the metals into the desired from by melting & costing down to hot & cold working, joining by welding, brazing, soldering or riveting, bolt fastening & similar other processes. Defence, SEBS (power), public works & irrigation, railways coal sector, petroleum oil, heavy industries, all large, medium/SSI Industries consume iron & steel in a great quantity for their capital equipments, industrial/commercial/residential building structures and raw material requirements. The raw materials for fabrication units are well known steel section, girders, plates, wires & hard ware etc. These raw materials are available through indigenous source with indication production.
Plant capacity: 1.67 MT/dayPlant & machinery: Rs. 47 Lakhs
Working capital: -T.C.I: Rs. 142 Lakhs
Return: 24.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

Water Proofing Liquid And Powder (Concrete And Mortar Admixture) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

The invention of air entraining agents in 1939 has been termed a revolutionary development in concrete technology. The basic function of an air-entraining agent is freeze thaw resistance, which was causing a lot of problems in cold countries. It has been found that there is good increase of construction industry now a days. On the basic it can be predicted that there will be good demand of water proofing compound used in the concrete and mortar admixture. There is good scope for new entrants in this field.
Plant capacity: 2 MT/DayPlant & machinery: Rs. 19 Lakhs
Working capital: Rs. 62.00 LakhsT.C.I: Rs. 123.00 Lakhs
Return: 46.00%Break even: 64.00%
Add to Inquiry Add to Inquiry Basket

Aluminium From Alumina - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Aluminium is the most abundant metal in the world. It makes up 8% of the solid portion of the earth crust. Every country processes large supplies of aluminium containing material, but process for obtaining metallic aluminium from most of these compound are not yet economical. The consumption of aluminium is increasing the main avenues of distribution. The unusual combination of lightness and strength makes aluminium application for many uses that other metals cannot fill. Aluminium is commonly alloyed with other metals, such as copper, magnesium, zinc, silicon, chromium and manganese and its usefulness is increased. Metallic aluminium or aluminium alloys, particularly with magnesium, are employed in structures for aircraft, automobiles, trucks and railways, cars and for cast and forged structural parts.
Plant capacity: 25000 MT/AnnumPlant & machinery: Rs 729 Lakhs
Working capital: -T.C.I: Rs 2571 Lakhs
Return: 38.00%Break even: 79.00%
Add to Inquiry Add to Inquiry Basket

SPONGE IRON - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Steel is produced through two process routes; the ore based Blast Furnace-LD Converter route or scrap or DRI based electric arc furnace route. The ore based process is adopted by large integrated iron and steel plants lassified as primary sector. Electric furnace route so far mainly using scrap as ferrous input material comes under secondary sector. The secondary steel sector, which produces steel through electric arc furnace and induction furnace, contributes 35 - 40% of total steel production of India. The input material for melting to electric furnaces, is mainly recycled scrap. Due to non-availability of scrap in the country, India is importing scrap. The sponge iron is a substitute for scrap in the electric arc furnace (upto 80%), which can be easily manufactured from indigenously available raw materials at very competitive price. Sponge Iron is the iron ore reduced in solid state by a direct reduction process using natural gas or non-cooking coal as reductant. The sponge iron is also known as Direct Reduced Iron (DRI), Hot briquetted Iron (HBI) or Metalized Iron. The term Hot Briquetted Iron (HBI) is generally used for gas based direct reduced iron made in briquette shape in hot condition just after it has been discharged from the shaft furnace. Direct Reduction (DR) is a metallurgical process of producing iron from iron oxide (in the form of lump ore or pellets) directly in the solid state, unlike going through the molten stage in blast furnace. The product DRI produced by this route has a honeycomb structure with minute pores, hence it is known as “Sponge Iron”.
Plant capacity: 50 MT/DayPlant & machinery: Rs 12 Corers
Working capital: -T.C.I: Rs 18 Crores
Return: 41.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Steel Rolling Mill - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The chief departments of a metallurgical plant operating on a complete are to finished product cycle are that operating on a complete are to finished product cycle are that blast furnace, steel making and rolling departments. The finished product of such a plant is rolled stock of various purposes, such as : rails, beams, channels, angles, round, square or strip steel, special purpose shapes,, plate and sheet, tubes etc. These industries can be in India with reasonably small investments (even less than one crore rupees). Straps of rerollable quality are available in abundance and at cheap prices. The metals sector is certainly among the leading polluters of the environmental media (Add the mining sector and a huge chunk of the pollution of the air, water and soil around us, can be attributed to these). India enjoys a cost advantage compared to some countries. According to the world steel dynamics, the total cost of production for steel in the USA is $510 per tones, in Germany $557, Canada $493 and in India it is 497. There is a good scope for new entrants.
Plant capacity: 200.00 MT/DayPlant & machinery: 275 Lacs
Working capital: -T.C.I: 3897 Lacs
Return: 61.00%Break even: 26.00%
Add to Inquiry Add to Inquiry Basket

High Mast Poles - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

High mast poles are newly ventured high pillars for using high mast lighting, flood lighting, sports lighting, traffic signals, street lighting etc. It is machine made or moulded product. It is manufactured by M.S. plate with galvanized uniform coat. It has now largely growing market. Every country now introduces this pole in their multipurpose use. Some organized companies have introduced this product and many companies are available in the European countries who are manufacturing high mast poles and machineries. It has very good market growth 5-8% per annum. Partly plant and machineries are available in India and some are to be imported. As a whole this is a good project for the any entrepreneur.
Plant capacity: 9000 Nos./ANNUMPlant & machinery: 206 Lacs
Working capital: -T.C.I: 484 Lacs
Return: 44.00%Break even: 71.00%
Add to Inquiry Add to Inquiry Basket

Oxygen and Nitrogen Gas Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Oxygen (CO2, gas at 00/1 matm., 1.429g./l, crit. Pressure, 49.7 Matm.) is a colorless, odourless, and tasteless gas, somewhat heavier than air. It is one of the most active elements and plays on essential part in the respiration of living cells and in combustion. Oxygen is required for cutting and welding of steel materials for manufacturing and repairs is various industries. Ship repairing, fabrication works etc. require large amounts of oxygen. It is also required for medication purpose and deep sea driving. Nitrogen gas used in the production of ammonia which in turn is used for the manufacture of urea and ammonium phosphate, which are fertilizers of great use. It is used for blanketing hazardous chemicals which will an inert atmosphere. Liquid Nitrogen is also used to maintain low temperatures during the transportation of frozen food. Oxygen and Nitrogen are the most important industrial gases. At present there are 190 units in the country. As the quantity of oxygen required in integrated steel plants is huge. The excess oxygen is compressed and bottled in steel cylinders and supplied to engineering industries. There is a very good market for new entrepreneur.
Plant capacity: 1440 Cubie Meter/DayPlant & machinery: 50 Lacs
Working capital: 18 LacsT.C.I: 101 Lacs
Return: 18.19%Break even: 75.00%
Add to Inquiry Add to Inquiry Basket

Ferro Chrome Alloy - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

In the manufacture of steel, chromium is added usually in the form of ferro chrome. Pure chromium metal, produced by electrolytic or aluminothermic processes, is used for alloying nonferrous engineering materials. The most common materials are nickel-based and cobalt-based alloys, most of which are used at high temperature. Chromium powder, as well as Ferro chromium Powder, has been used in considerable quantities to produce chromium coatings. The so-called pack chrome coating is applied to cast and wrought steel parts by immersing the article in a mixture of chromium powder, an inert material, e.g. kaolin, alumina, or magnesia and mixtures of various salts. Such as ammonium, iodide or chloride. The gas chromium coating has been used to produce a so-called tin-free steel and to treat sheet steel on a continuous line. The demand for ferro alloys has been increasing with that of alloy and special steels. There are six leading players and over 30 small producers. The industry has tied up with companies in Europe for technology inputs. The major users of alloy steel are : auto industry, railways, forging, tubes, springs and other engineering industries. There is a bright scope. Any entrepreneur can venture to in this project.
Plant capacity: -Plant & machinery: 2998 Lacs
Working capital: -T.C.I: 4490 Lacs
Return: 34.00%Break even: 76.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 6 of 159 | Total 1590 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 158 159   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top