REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Investment Opportunities & Business Ideas in Qatar, Middle East - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 60 of 219 | Total 2184 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 60 218 219   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

PECTIN FROM RAW PAPAYA

Pectin is a structural heteropolysaccharide contained in the primary cell walls of terrestrial plants. It was first isolated and described in 1825 by Henri Braconnot. It is produced commercially as a white to light brown powder, mainly extracted from citrus fruits, and is used in food as a gelling agent, particularly in jams and jellies. It is also used in dessert fillings, medicines, sweets, as a stabilizer in fruit juices and milk drinks, and as a source of dietary fiber. Pectin is a type of polysaccharide fiber found in the cell walls of plants, specifically in the leaves, roots and fruits. Its main purpose is to bind plant cells together. Pectin is also used in foods to enhance absorption and add fiber to your diet. It’s typically employed as a thickening agent for foods that need to gel or thicken, such as jams and jellies. Lastly, pectin can also be utilized as a fat substitute in some baked goods.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

FARM TOOLS AND IMPLEMENT -KUDALI, FAWRA, GAITI & BELCHA MANUFACTURING (AGRICULTURAL IMPLEMENTS)

The contribution of agriculture and allied sectors to India’s GDP stood at around 13.7% in 2012-13 (at 2004-05 prices) and the sector provides employment to around 58% of the country’s population. Agricultural production was estimated at 264.38 million tonnes in 2013-14 (includes kharif 2013 and rabi 2013-14 crops) and is expected increase further. Albeit still in an early stage, farm mechanization has played a notable role in the increase in agricultural production in the country. Manufacturing of agricultural equipment has the presence of around 250 medium and large scale enterprises, 2,500 small scale and 18,000 tiny units in India.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

PRINTED TIN CONTAINERS (TIN CANS)

A tin can, tin (especially in British English, Australian English and Canadian English), steel can,[1] steel packaging or a can, is a container for the distribution or storage of goods, composed of thin metal. Many cans require opening by cutting the "end" open; others have removable covers. Cans hold diverse contents: foods, beverages, oil, chemicals, etc. Steel cans are made of tinplate (tin-coated steel) or of tin-free steel. In some dialects, even aluminium cans are called "tin cans".Tin is a soft, silvery-white metal that is very light and easy to melt. Being so soft, tin is rarely used as a pure metal; instead, it is combined with other metals in order to make alloys that possess tin's numerous beneficial properties. These include a low toxicity level and a high resistance to corrosion. Tin cans became mass market when the Industrial Revolution made biscuits one of the first industrially made food products. Biscuits were durable, could be made on a large scale by bakeries equipped with new machines and as a relatively clean product, could use a new source of cheap labour –women living in the rapidly growing cities, whose populations also provided a ready market. Tin cans are ideal for packaging food products. The food is preserved, long-life (air tight packaging) and fresh. The nutritive value remains. Tin cans are also easy to transport, also across longer distances. Food cans are used for (olive)oils, vegetables, fish, fruit, meat, soup, ready meals and pet food, this particularly because of the good protection of the filling good and the long conservation. Also the packaging of pharmaceuticals in these cans is possible as long as the production meets the legal requirements.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

BRASS ROLLING SHEET

Brass Sheets are known for its superior finish appearance and finds various uses because of its easily malleable nature that allows the metal to get formed in various shapes and sizes. These brass sheets also find usage in making brass hardware. These brass sheets varies in sizes and thickness and can be provided in either soft or hard finish, thus making these perfect for many commercial and industrial applications.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

BALL PEN MANUFACTURING

Ballpoint pens are made to order in mass quantities. While each manufacturer makes them slightly differently, the basic steps include ink compounding, metal component formation, plastic component molding, piece assembly, packaging, labeling, and shipping. In advanced shops, pens can go from raw material to finished product in less than five minutes. A ballpoint pen is a writing instrument which features a tip that is automatically refreshed with ink. It consists of a precisely formed metal ball seated in a socket below a reservoir of ink. As the pen is moved along a writing surface, ink is delivered. Even though ballpoint pens were first patented in the late nineteenth century, they only started to reach commercial significance in the early 1950s. Now, ballpoint pens dominate the writing instrument market, selling over one hundred million pens each year worldwide.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

C.P. BATH ROOM FITTING (CHROME PLATED)

Chrome plating is used in a number of metallic products to increase its durability, because products which are chrome plated do not get corroded easily. Chrome plating is mostly used in the automotive industry and the bath ware industry. Chrome happens to be frugal, lightweight and attractive making it the best bet to plate luxury bathroom fittings. Most luxury bathrooms are state-of-the art designed sanitary ware which look spotless and attractive. Chrome meaning steel that has undergone several plating processes to endure the temperature changes and weather that a car is subject to outdoors. Triple plating is the most expensive and durable process, which involves plating the steel first with copper and then nickel before the chromium plating is applied. The fact that chrome plating is a method used in electroplating makes it rust resistant. Chrome plating also does not oxidise easily because of which it is mainly used in bathrooms and kitchens. CP fittings are available in a plethora of designs which look exquisite, when placed on the bathroom sink or used as a shower.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Elastic and Rigid Tape

Elastic tape is unique to other types of tape, like traditional athletic tape, in that it has elastic properties. Typically, elastic tape is designed to stretch up to approximately 140% of its original length, thus mimicking the properties of skin and allowing for some “recoil” or pulling force on the skin and underlying structures. These features are opined to provide several benefits including a correction of alignment of weak muscles, facilitation of joint motion, reduction in swelling, enhanced blood flow, and pain reduction. Rigid Strapping Tape is made from a strong rayon cloth with an aggressive sticking zinc oxide adhesive mass. The optimum strength rayon backing material and porosity enables the tape to remain in place during all sporting pursuits involving vigorous exercise and in all conditions. Pinked edges provide quicker tape application whilst eliminating threading. Rigid strapping tapes provide strong support for joints during high-stress sport activity, minimising excessive joint activity that can cause injury. The tapes are suitable for taping ankles, knees, fingers, shoulders and elbows.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Handloom Products (Khes, Bed Sheets, Bed Covers, Furnishing And Tapestry Cloths)

A 'handloom' is a loom that is used to weave cloth without the use of any electricity. Hand weaving is done on pit looms or frame looms generally located in weavers' homes. Weaving is primarily the interlacing of two sets of yarn – the warp (length) and the weft (width). Handlooms also use naturally grown fibers and dyes. Handloom products are created by weavers from all over the country. Khes is a floor spread and bed covering that is traditionally made of cotton. The thinner ones are used as bed coverings in winter and the thicker ones are used in place of shawls during winters. Bed cover is a fabric worn on the bed over the blanket and sheet is used on the bed inside a blanket. They have higher demand especially by the urban population. Current demand is met through local production and import. Bed cover is a fabric worn on the bed over the blanket and sheet is used on the bed inside a blanket. Tapestry is a form of textile art, traditionally woven on a vertical loom. Tapestry is weft-faced weaving, in which all the warp threads are hidden in the completed work, unlike cloth weaving where both the warp and the weft threads may be visible. In tapestry weaving, weft yarns are typically discontinuous; the artisan interlaces each coloured weft back and forth in its own small pattern area. The handloom sector is a very important industry, as it is the second largest employer of the rural population after agriculture. The handloom industry employs 13 million people directly and indirectly and contributes to almost 19% of the total fabric produced in the country. The Indian handloom industry also produces over 70 percent of the world’s handwoven fabrics. In 2013, this sector produced 6.9 billion square meters of cloth.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Hexamine from Formaldehyde

Hexamine is a reaction product of formaldehyde and ammonia widely employed in the production of thermosetting plastic materials. This product is usually obtained by evaporating a mixture of an aqueous solution of formaldehyde and ammonia, by a batch process. Batch processes are quite uneconomical and a Suitable continuous process wherein satisfactory yields are obtained has long been sought. Formaldehyde is also being used in producing home building products. Formaldehyde is also known for its preservative and anti-bacterial properties. Hence, medical laboratories and some consumer products are also using formaldehyde as a preservative. ? The global consumption of formaldehyde is increasing as it is being used on a large scale for construction and remodeling activity and furniture production. Due to the excellent thermal and chemical resistance, formaldehyde-based resins are being used in manufacturing airplane and automobile parts. Formaldehyde is also being used in manufacturing anti-infective drugs, hard-gel capsules, and vaccines.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Extraction of Oil (Jeera, Ajwain, Ginger, Cardamom Oil )

Extraction is the first step in the refining process. Oils and fats are extracted from their original source (the seeds, fruits or other oil-bearing raw materials) using a variety of different methods. In some cases, for example virgin olive oil, the oil is extracted directly from the fruit by means of a simple mechanical press and used without the need for any further processing. This process is known as cold pressing. For most oils however, the process is more complex. Modern oil mills extract oil using a combination of pressing, cooking and solvent extraction. This process is often carried out in the country of origin. The seeds of Ajwain have been popularly used in India by many households in order to treat upset stomach, and used in the preparation of various food items to prevent stomach related issues. The scientific nomenclature name of the ajwan is Trachyspermum ammi (other: Trachyspermum copticum, and Carum copticum). The Ajwain essential oil is extracted from the Ajwain seeds. The color of the Ajwain oil can vary from orange to red, and the oil gives a pungent thyme odor. The global cardamom oil market is expected to grow at a CAGR of 5.3% over the forecast period i.e. 2017-2024. Further, cardamom oil market is anticipated to reach USD 7.2 billion globally by 2024. The growth of cardamom oil market is driven by the increasing consumer awareness regarding health benefits of cardamom oil. Further, its heightening application in personal care products is also envisioned to bolster the growth of cardamom oil market. Ginger is majorly used in spices and thus ginger oils and oleoresins are preferred to prepared dried spices as flavoring in food industry, because they are more stable, contamination free , cleaner, , and can be easily standardized by blending. Thus the growth of food industry and spices demand are another factors driving growth of ginger oil market. The growth of natural personal care products industry is another growth driver for ginger oil market. The global essential oils market has grown steadily in the last few years. The market size is projected to reach USD 11.19 Billion by 2022, at a CAGR of 8.83% from 2017 to 2022.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 60 of 219 | Total 2184 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 60 218 219   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top