Google Search

Search

Already a Member ?

Investment Opportunities & Business Ideas in Oman, Middle East - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 4 of 213 | Total 2130 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 212 213   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Refining of Used Engine Oils for Making Base Oil - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

There is availability of large amount of burnt engine oil and almost 40 % of this oil remains unburnt in the total available burnt oil. It can be used as secondary oil by treating it. Certain series of specific treatment is available which is necessary for manufacturing base oil from used engine oil. The required technology is fully available in India and one may avail the technology by using our indigenous expert. The process of refining of used oil is not pollution free. So necessary step must be taken to remove the pollution. Design of plant and machinery is also available here. This oil can be used in cracking process. It can be used as secondary feed stock in the refinery for a catalytic cracker. It can be also used as marine diesel. So, if the raw materials are available here, then it can be a good project to invest.
Plant capacity: 50.00 MT/DayPlant & machinery: Rs. 257 Lakhs
Working capital: Rs. 344 LakhsT.C.I: Rs. 674 Lakhs
Return: 37.47%Break even: 45.89%
Add to Inquiry Add to Inquiry Basket

Bitumen Emulsion for Road (Cationic Type) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Bitumen Emulsion is one kind of speciality chemicals which has large commercial uses as coating material in the road construction and many other construction field. It is also used as sealing material for the different types of laminated paper. It is a by product of petroleum distillation plant or coal carbonization plant. It may be cationic or anionic type. Bitumen emulsion has very good domestic demand and its demand growth is 5-6% per annum. New entrepreneur may enter into this field will successful.
Plant capacity: 5 MT/DayPlant & machinery: Rs. 18 Lakhs
Working capital: -T.C.I: Rs. 44 Lakhs
Return: 50.34%Break even: 73.35%
Add to Inquiry Add to Inquiry Basket

Naphtha Base Solvent - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

There are various solvents which are present in naphtha. The most commonly available solvents which can be extracted from naphtha are petroleum ether, benzene, ligroin, xylene and solvent naphtha. These are generally classified according to their boiling range through specific distillation process. It is necessary to import raw materials partially for keeping constant production. These solvents have enormous and very important applications in various industries. Petroleum ether is enormously used in the pharmaceutical industry as solvent. Benzene also used for manufacturing of ethyl benzene, dodecylbenzene (for detergents) cyclohexane (for nylon) phenol, maleic anhydride etc. Ligroin is used to make thinner and also is used as solvent. Xylene is used for activation gasoline, protective coatings, solvent for alkyd resins etc. There good scope for this business days to come.
Plant capacity: 50 Tons/DayPlant & machinery: Rs. 82 Lakhs
Working capital: Rs. 297 LakhsT.C.I: Rs. 424 Lakhs
Return: 46.42%Break even: 36.31%
Add to Inquiry Add to Inquiry Basket

Polyethylene Wax - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Polyethylene waxes can be made in two main grades, emulsifiable and non-emulsifiable waxes. Polyethylene wax has excellent stability against polishing, scratch resistance, metal resistance etc. This is being import from different countries. It can be predicted that having setup this unit will be more beneficial for new entrepreneurs.
Plant capacity: 2 MT/DayPlant & machinery: Rs. 104 lacs
Working capital: Rs. 70.00 LacsT.C.I: Rs. 234 Lacs
Return: 31.86%Break even: 55.63%
Add to Inquiry Add to Inquiry Basket

Wax from Slack Wax - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Petroleum waxes are broadly defined as the waxes naturally present in the various fractions of crude petroleum. After separation from lubricating oils, wax constitutes a valuable products with special characteristics for a number of important uses. Petroleum wax, like other petroleum derivatives, is essentially a mixture of hydrocarbons. It is mostly composed of long chain molecule and remains in solid state at room temperature. Wax can be prepared from slacked wax, which is heavy distillate residue, obtained from petroleum refinery. The prepared final product is paraffin wax, which has tremendous industrial applications, used as plasticizers as well as lubricant and as main raw material in candle industry. The on going demand of this product is appreciable and there is no import of this product, but it has tremendous export capability. The new entrepreneur, with having adequate knowledge of government rules and regulations, can invest safely in this sector.
Plant capacity: 50 Tons/DayPlant & machinery: Rs. 174 Lakhs
Working capital: Rs. 1114 LakhsT.C.I: Rs. 1478 Lakhs
Return: 44.73%Break even: 35.55%
Add to Inquiry Add to Inquiry Basket

Dextrin From Starch - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Dextrin is a starch derivative. It is obtained as water-soluble carbohydrate produced by heat and acid depolymerization. It is mostly used in adhesive industry. Dextrin is used in adhesive application. These are used for envelope and labeling adhesives, adhesive for postage-stamp, gummed tape etc. Dextrin manufacture has very good scope for development in the small scale sector and especially in developing and agriculture based country like India. At present dextrin is running in short supply in the market. There is good scope for new investment in this project. The new entrepreneur can well venture in this field.
Plant capacity: 500 Kgs/DayPlant & machinery: -
Working capital: -T.C.I: -
Return: 39.71%Break even: 58.65%
Add to Inquiry Add to Inquiry Basket

Manufacturing of Dextrose Anhydrous, Sorbitol & Vitamin C - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Dextrose anhydrous is generally manufactured from starch, basically maize starch. It is manufactured by vacuum evaporation of the dextrose solution and by crystallization. There is plenty of availability of raw materials. The market demand of the above products is appreciably high and these have good export potential also. But the main barrier to produce these products, that there is no available bacterial culture in India and the manufacturers are solely depended upon the advanced countries for the culture. As a whole, this is a good project provided good commercial bacterial culture available with the manufacture. Once, if one can solve the problem of availability of bacterial culture, then it is very profitable sector for one for investment.
Plant capacity: 17.00 MT /DayPlant & machinery: Rs. 406 Lakhs
Working capital: Rs. 575 LakhsT.C.I: Rs. 1280 Lakhs
Return: 44.07%Break even: 45.54%
Add to Inquiry Add to Inquiry Basket

Dextrose Injection - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Dextrose injection basically is manufactured from the homogeneous solution of dextrose and sterilized water. As raw material, there is abundant availability of dextrose in India. Basic plant and machinery?s as well as good fabricators also are fully available in India. The demand growth of this product is very appreciable. Right now it is increasing at a rate 5 % per annum. Few organized sector are engaged in the production of dextrose. But the demand is gradually increasing. So to meet the gap of demand and production, there require more production units. So this sector may be prospectus one for new entrepreneur. As a whole, this is a good one and one may be successful in this arena.
Plant capacity: 10000 Bottles/DayPlant & machinery: Rs. 82 Lakhs
Working capital: Rs. 151 LakhsT.C.I: Rs. 290 Lakhs
Return: 28.26%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Maize Cultivation & Its Products - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost & Revenue

Amongst cereal crops of India, Maize ranks fifth in area and third in production and productivity. During last year 11.2 million tons grain production was realized in an area of 6.2 million hectare more or less constant in the last one decade. Production increased from less than 6.0 million tonnes to more than 11.2 million tonne during this decade. The yield increases ranged from two times in less productive states like Rajasthan, Uttar Pradesh, Madhya Pradesh and Gujarat to 3-5 times in high productivity states such as Punjab, Himachal Pradesh, Bihar, Andhra Pradesh and Karnataka. In India, Maize cultivated area expanded at an average annual growth rate of 2.9 percent resulting in about 6 million hectare at present. There is good scope for new investment in this field. Any entrepreneur can invest in this project.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Coconut Shell Charcoal - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

In major importing countries coconut shell charcoal is mainly used in the manufacturing of activated carbon. All the production units are enjoy higher growth rate. The demand for coconut shell charcoal and activated carbon will be increased. There is good market potential for this unit. It also have good export potential. Any new entrepreneur can invest in project. He will get good profit margin as well as good market.
Plant capacity: 1.0 MT/DayPlant & machinery: Rs. 6 Lakhs
Working capital: -T.C.I: Rs. 19 Lakhs
Return: 45.25%Break even: 48.36%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 4 of 213 | Total 2130 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 212 213   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top