REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Investment Opportunities & Business Ideas in Mozambique, Africa- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 6 of 66 | Total 660 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 65 66   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

MEDICAL DISPOSABLES: Disposable Syringes (Self Destructive) with Needles, Catheters and Mask - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials

Disposable needle is widely used by doctors for injection purpose with the help of syringes. With the increase in population in our country, requirement of medicine and injections has increased. For more strength of people more number of needles is required with syringes. Tablets or capsules also play a great role in the life of human beings but injections are also a must to some extent. the disposable syringes market has now self-destructing or auto-disable (AD) syringe as a safe bet against re-use and spread of HIV, hepatitis and other infections. The national immunization policy has adopted the non-reusable, self-breaking syringes, though many States are yet to follow suit for the curative injections. Disposable surgical caps and mask are used considerably while performing an operation or undergoing surgical measures. Catheters are used for the purpose of passing urine for bed-ridden and emergency patients in hospitals, nursing homes etc. With the development of pharmaceutical industries the use of syringes and disposable needles will also develop. About 70% pharmaceutical industries are in small-scale sector. Disposable syringes are becoming more popular in the medical world due to its lower cost and higher accuracy. Plastic can be used in place of metal without any problem. The procedure is also relatively easy and cheaper. New comer can well venture into this field. Cost Estimation: Capacity : Seamless SS Tubes – 324 MT / Annum Disposable Syringes & Needles – 36,00,000 Nos./Annum Disposable Surgical Masks – 9,00,000 Nos. / Annum Disposable Catheters – 9,00,000 Nos. / Annum
Plant capacity: -Plant & machinery: 147 Lakhs
Working capital: -T.C.I: Cost of Project : 426 Lakhs
Return: 43.00%Break even: 47.00%
Add to Inquiry Add to Inquiry Basket

COPPER INGOT / COPPER ASH FROM COPPER ORE - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Copper is the perfect material for recycling. It is valuable, easy to identify, easy to clean, heavy and can be much use to foundries & other non-ferrous industries as scrap. It has many important alloys e.g. bronze and brass. Copper being very versatile metal, it encompasses a very wide field of applications which comprise electric wiring, switches, plumbing, heating, roofing and building construction, chemical and pharmaceutical machinery etc. The Indian copper industry saw a phenomenal boost in production and consumption. The production capacity has been further increased in phases to 5,00,000 tonnes. The company is also aggressively developing value-enhancing strategies for its existing product. Indias strong economic growth and key priority for the power sector, which is major consumer of copper, will support high demand and price in the near term. The Indian copper industry comprises three percent on the world copper map. It is a lucrative trade with bright future prospects.
Plant capacity: 3000 MT / AnnumPlant & machinery: 279 Lakh
Working capital: -T.C.I: Cost of Project : 684 Lakh
Return: 46.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

COPPER WIRE DRAWING (From Higher Size to Very Thin Size Used in Electrical Cables) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials

Copper wire is an essential material for electrical cables, motor and transformer winding. It is available in different gauges. The gauge of the copper wire depends upon the winding required for the specific motor or transformer. On the basis of high conductivity, strength and ductility, copper wires are adopted as the best known economical material for such purposes. Copper is used mainly in the electrical industry for manufacturing parts of electrical apparatus, bus bars, wires etc. Another reason for its wide use is that the copper has resistance to atmospheric corrosion because of the formation of uniform layer of oxide on the surface of the metal. Besides these factors, copper has good mechanical properties viz. good of copper conductor wire is so high in India that despite a fair increase in installed capacity and actual productions of the units, import is continuing. Thus, some more new units need to enter the field.
Plant capacity: 500 Kg. / DayPlant & machinery: 68 Lakhs
Working capital: -T.C.I: Cost of Project : 167 Lakhs
Return: 43.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

MATCHBOX - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Matchbox is one of the most important items. Though it is looked upon as small and insignificant, earlier it was a big problem. In the 17th century, people used phosphorous and sulfur together using flints or sticks of woods. It was then found in the 19th century that using non-provisions red phosphorous on the match head instead of white phosphorus. The raw materials required for the manufacture of matches are timber paper, flour paste or glue, and chemicals of which amorphous phosphorus and potassium chlorate are the most important. Due to the widespread use of cigar, bidi, Cigarettes and domestic uses, there are huge demand of match boxes. A new entrepreneur can well venture into this field,because it has good future scope.
Plant capacity: 50000 Nos. /DayPlant & machinery: Rs. 5 Lakhs
Working capital: -T.C.I: Rs. 29 Lakhs
Return: 46.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

IRON ORE PELLETIZATION PLANT - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Iron ore pellets are used in blast / electric furnaces for producing sponge iron and steels. Market by high productivity, lower fuel consumption and improved furnace control, pellets are now preferred all over the world for primary steel making. Very fine particles cant be directly used in the furnace for melting due to dust problem and economic considerations. So these fines are bonded together into feed able sizes by various agglomerating processes. Minerals are scare assets and their efficient use and conservation has become vital for future growth India is not fully endowed with requisite mineral resources for sustaining its cherished economic growth.
Plant capacity: 1008000 MT/AnnumPlant & machinery: 138 Crores
Working capital: -T.C.I: Cost of Project : 224 Crore
Return: 46.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

COAL TAR PITCH - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic

Coal tar pitch is the residue from the processing of coal tar. Since pitch constituents over 50% of crude tar, its utilization has a major effect on the economics of tar processing. Coal tar pitch is binder for carbon electrodes base for paints and coating. Pitch is a valuable binder for briquetting and in making electrodes. The aluminium industry of the world depends heavily on electrodes made from petroleum coke, pitch coke and pitch. Because of its valuable water proofing properties, pitch is employed in a number of formulations for treating walls, roofs and floors. The scope of pitch as pitch mixture and creosote constitute road tar and fuels, and end user industries have very good market. There is a good scope for new entrepreneurs.
Plant capacity: 7500 MT/Annum Plant & machinery: 143 Lakhs
Working capital: -T.C.I: Cost of Project : 340 Lakhs
Return: 43.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Detergent cake, Powder and Dish washing Detergent cake and Powder - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Soaps are the earliest form of detergents. Though at present the term detergent is used for synthetic detergent derived from petroleum products. The origin of soap making is unknown. The pheonicians were acquainted with it by at least 600 BC & it was known the gauls not letter than about 300 B.C. These chemical compounds are used for human comfort, cleanliness, and for industrial surface active applications. The success of any cleaning agent is to supply compounds with hydrophobic and hydrophilic groups which will also appreciably decrease surface tension and increase mettability. Synthetic detergents are organic chemicals which promote better surface tension lowering than soaps. Where the use of detergents increases to the point of creating problems in municipal sewerage plants due to excessive foaming and inability to reduce the organic content of the sewage effluent, biodegradation of detergent compounds becomes an important factor, in the U.S., detergent compounds, which can be oxidized to simple end-products, are known as biologically soft syndets and are preferred in detergent compounding. Two of the most prominent detergents in use today. Firstly sulfated fatty alcohols, and secondly is alkyl –Aryl sulfonates. The detergent bar for dish washing is of universal type and can be employed for cleaning of aluminium brass and stainless steel utensils, crockery etc. The product is a very common item in every house from lowest to highest class, detergent cake and detergent powder largely used in the domestic houses, commercial sectors, hotel industries, garments industries and in many other sections of the society. There is high price, medium price and low priced detergent available. India has the 2nd largest market in the world after the U.S. of the market is growing at the rate 10% annually. So we can say that there is good scope for new entrants.
Plant capacity: Detergent Cake, Powder, Dish washing Cake & Powder Each 1 MT/Day = 4 MT/DayPlant & machinery: 28 Lakh
Working capital: -T.C.I: 239 Lakh
Return: 47.00%Break even: 37.00%
Add to Inquiry Add to Inquiry Basket

Growing Prospects for Packaged Drinking Water Industry - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Cost of Project

Water everywhere, not a CLEAN drop to drink! Who would have thought that there will be a day when sanitation of available water would be more of a concern than availability of water itself? Hygiene is of great concern to everyone today, and this is evident with the surging rise in the consumption of packaged/bottled water. India has 16 percent of the world's population, 2.5 percent of the land mass and 4 percent of the world's water resources. These limited water resources are depleting rapidly while the demands on them are increasing. Drinking water supplies in many parts of India are intermittent. Transmission and distribution networks for water are generally old and badly maintained, and as a result, are deteriorating. India is one of the biggest and most attractive water markets in the world. The boom time for Indian bottled water industry is to continue- more so because the economics are sound, the bottom line is fat and the Indian government hardly cares for what happens to the nation's water resources. Corporate control over water and water distribution in India is growing rapidly: the packaged water business is worth $250 million, and it's growing at a huge 40-50% annually. Around 1,200 bottling plants and 100 brands of packaged water across the country are battling over the market, overdrawing groundwater, and robbing local communities of their water resources and livelihoods. Most multinational (MNC) companies view India as the next big market with a lot of potential and growth possibility. Several MNCs are waiting in the wings to expand a $ 287 billion global water market into India. There is a huge market being exploited by the packaged water industry, and it's growing at 40% per annum. With over a thousand bottled water producers, the Indian bottled water industry is big by even international standards. There are more than 200 brands, nearly 80 per cent of which are local. Most of the small-scale producers sell non-branded products and serve small markets. In fact, making bottled water is today a cottage industry in the country. There is investment worthy mid-cap companies in this segment. From being confined to the uppermost echelons of society, packaged water has now become a commonplace commodity and almost a necessity in metros. After witnessing historic growth in recent years, it has become a Rs 3,000-crore industry, one that is slated to only post healthy growth rates to become a Rs 10,000-crore business in just three years, The bulk water industry, or water in 12-, 20- and 25-litre packages, has also witnessed a parallel growth of Rs 700-1,000 crore. Basically, the market can be divided into two segments — the retail consumer market where the pack sizes are 500 ml, one litre, 1.2/1.5/2-litre and five-litre, and the household and institutional market, where the pack size is usually are 20- or 25-litre. The Bureau of Indian Standards (BIS) is the governing authority on all quality and production regulations related to natural mineral water as well as packaged drinking water. The all-India market for packaged water is between $145 million (Rs. 8 billion) and $21 million (Rs. 10 billion) and is growing at the rate of nearly 40 per cent per annum. Even though it accounts for only 5 percent of the total beverage market in India, branded bottled water is the fastest growing industry in the beverage sector. While the single largest share in the mineral water market might still belong to an Indian brand -- Parle's $52 million (Rs. 2.5 billion) Bisleri brand has a 40 percent share -- multinational corporations are not far behind. Nestle and Danone are vying to purchase Bisleri, and Pepsi's Aquafina and Coke's Kinley brands have been extremely successful in edging out many of the small and medium players to buy-outs and exclusive licensing deals. In less than two years since its launch, Aquafina has cornered 11 percent of the market and Kinley has almost a third of the market. News reports indicate that other MNCs like Unilever are also eying the market. DEMAND OF WATER WOULD NEVER GO DOWN & WATER WOULD NEVER BE OUT OF BUSINESS
Plant capacity: 30,000 Thousand Nos./Annum or 1,00,000 Bottles /dayPlant & machinery: Rs. 105 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 282 Lakhs
Return: 44.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

Packaged Drinking Water & Pet Bottle - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

-
Plant capacity: 7000 Ltrs Packaged Drinking/day, 7000 Nos. Pet Bottles/dayPlant & machinery: Rs. 60 Lakhs
Working capital: -T.C.I: Rs. 135 Lakhs
Return: 42.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Alumina from Bauxite (By Calcination Process) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

-
Plant capacity: 66.66 MT/DayPlant & machinery: Rs. 671 Lakhs
Working capital: -T.C.I: Rs. 2112 Lakhs
Return: 46.00%Break even: 38.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 6 of 66 | Total 660 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 65 66   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top