REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Investment Opportunities & Business Ideas in Ghana, West Africa - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 12 of 248 | Total 2471 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 247 248   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Glass Reinforced Concrete - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Glass reinforced concrete is a composite material consisting of a mortar of hydraulic cement and fine aggregate reinforced with alkali resistant glass fibers. The properties of GRC depend on a wide range of variables. It includes method of manufacture, mix formulation. Fibre product type, length and orientation, admixtures used, etc. AGRC material may therefore be tailored to meet the particular requirement of a specific application. As the construction industries growth increase by 8% per annum on that basis it can be predicted that there will be growth of GRC industries at the rate of 8% per annum.
Plant capacity: 6000 MT GRC Mix/AnnumPlant & machinery: Rs. 14 Lakhs
Working capital: Rs 34 LakhsT.C.I: Rs 81 Lakhs
Return: 39.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

Water Proofing Liquid And Powder (Concrete And Mortar Admixture) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

The invention of air entraining agents in 1939 has been termed a revolutionary development in concrete technology. The basic function of an air-entraining agent is freeze thaw resistance, which was causing a lot of problems in cold countries. It has been found that there is good increase of construction industry now a days. On the basic it can be predicted that there will be good demand of water proofing compound used in the concrete and mortar admixture. There is good scope for new entrants in this field.
Plant capacity: 2 MT/DayPlant & machinery: Rs. 19 Lakhs
Working capital: Rs. 62.00 LakhsT.C.I: Rs. 123.00 Lakhs
Return: 46.00%Break even: 64.00%
Add to Inquiry Add to Inquiry Basket

Aluminium From Alumina - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Aluminium is the most abundant metal in the world. It makes up 8% of the solid portion of the earth crust. Every country processes large supplies of aluminium containing material, but process for obtaining metallic aluminium from most of these compound are not yet economical. The consumption of aluminium is increasing the main avenues of distribution. The unusual combination of lightness and strength makes aluminium application for many uses that other metals cannot fill. Aluminium is commonly alloyed with other metals, such as copper, magnesium, zinc, silicon, chromium and manganese and its usefulness is increased. Metallic aluminium or aluminium alloys, particularly with magnesium, are employed in structures for aircraft, automobiles, trucks and railways, cars and for cast and forged structural parts.
Plant capacity: 25000 MT/AnnumPlant & machinery: Rs 729 Lakhs
Working capital: -T.C.I: Rs 2571 Lakhs
Return: 38.00%Break even: 79.00%
Add to Inquiry Add to Inquiry Basket

PLY BOARD FROM BAMBOO - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Ply Board is wooden made board or wooden like raw materials largely used for making ply board. There is large use of ply board nowadays in making wooden base furniture. Bamboo can be used for making ply board. There is large amount of bamboo available in our country. Bamboo on special processing can be converted into ply board. Matured bamboos are used for making ply board. There is very good rising demand of ply board. For meet up the demand of ply board few new entrepreneurs can start this industry. In this process solid waste may be come up which can be recycled or can be further processed for making organic fertilizer. Bamboo Board The increasing shortfall of wood is giving rise to the development of non-wood materials. The development of bamboo-board is expected to relieve the pressure on wood, as the raw material is available at a much faster rate. Bamboo is harvested in a four to five year cycle against 40 years for medium density hardwood species used for plywood. The first bamboo-based panel was developed in China in the 1940s. Since then, some 28 panel products have been developed. In spite of this, the commercialization of bamboo panels has not been commensurate with the variety of products developed, mainly because only a few technologies have come out of detailed investigations and industry-scale trials. In the search for non-timber forest products to substitute wood, bamboo has emerged as a material par excellence. It is now widely recognized that bamboo in panel form is ideal to replace wood in several applications. It is in great demand in designer homes as flooring, walling, and paneling material. Based on the culm derivatives used, the boards may be grouped in the following categories : Culms converted into slivers, strips or lathes by flattening and/or cutting, and further processed, Culms peeled into veneers and further processed, Culms converted into particles, fibers, wafers or strands and reconstituted, Combination of one or more of above products among themselves or with other materials and further processed. Such composits include: different bamboo panels; wood or other lignocellulosic materials; and inorganic substances, Various types of bamboo boards are made from Bambusa bambos, B. polymorpha and Dendrocalamus strictus. Building-Board - There is a great demand for panel materials of all kinds in the building and furniture industry. Chemically processed bamboo strips or veneers are interwoven into mats. They are pressed together at high temperature to form boards properties of larger sizes of different properties with uniformity of strength in the principal directions. Flattening and widening of bamboo can also make boards. The processes involved in manufacture of building boards include defibering, thermal hydrolysis, mixing shavings with resin and finally pressing of resin treated bamboo mats. These boards have a pleasing appearance and adequate strength and optimum hygroscopicity. Boards from slivers, strips or lathes - Slivers of uniform thickness and width are woven into mats, following traditional or innovative designs and cold or hot pressed into boards. Particleboard - In India only a small quantity of bamboo particleboard (about 1500 tonnes/year) is produced. As a common national standard exists for particleboard produced from all lignocellulosic materials, bamboo particleboard requires to conform to IS : 30871985 (Standard Specification for Medium Density Wood Particle board for General Purposes). Bamboo strip, wood veneer and particleboard - Bamboo strip board forms the face. Wood veneer and particleboard are used as core. Bamboo mat boards - Bamboo mat board is the first bamboo-based panel to be produced commercially. Its versatility has been widely recognized. It is commercially produced in China (under the name bamboo mat plywood), India, Thailand and Vietnam. One of the major uses of bamboo mat boards is in building interiors and construction. Because of its aesthetic appearance the board finds ready acceptance as paneling material in place of decorative plywood or other pre-laminated panel materials. Boards being phenol bonded are very durable as compared to commercial panel materials. A factory in Kerala State started manufacturing Bamboo mat board in 1984 using the modified technology. This factory is still producing bamboo mat board, with slight modifications of the process, and marketing it for use in furniture, housing and shuttering. Bamboo mat and rice husk board - Bamboo mat is used as face and rice husk particleboard as core. It is produced in small sector industry in India. Stringer type board - In addition to flat ones, some mats are made in the form of bamboo tubes or the required size and treated with phenolic resin. Rectangular split steel mandrels are driven into these and are placed between two sets of flat mats in a continuous raw and pressed in a mould with side pressure. The bamboo boards can also be faced with fancy veneers or metals when covered with special type of wood shavings or bamboo shavings which can be dyed, they make attractive material for application in housing, decking, flush doors etc. Bamboo boards buried in test yards for more than eleven years were found to be unaffected by termites and fungi. Their resistance to fire is also similar to that of wood.
Plant capacity: Plant & machinery: Rs 42 Lakhs
Working capital: -T.C.I: Rs 114 Lakhs
Return: 41.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

Talcum Powder and Compact Powder for Face - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Talcum powder is naturally available as magnesium silicate of monohydrate. It is largely used in the cosmetic and soap industries. It is also known as soap stone. For making face powder it should be non toxic to the skin. This is not only used by women but men also like to apply talcum powder or some specially compounded powder to the face. Compact powder also made by using starch, starch derivatives. Specially cosmetics and normal cosmetics items are used largely in the different section of the community. Now in our country there is market demand increase by 5% per annum. As a whole any new entrepreneur comes in this type of production will have to face the competition in the market. There is a very good scope for new entrepreneurs.
Plant capacity: 3000 MT/ANNUMPlant & machinery: 31 Lacs
Working capital: -T.C.I: 81 Lacs
Return: 36.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

Dairy farming and dairy products (Pasteurised Milk, Butter, Ghee, Paneer and Butter Milk)- Cattle Breeding Farm, Fodder, Livestock Farming, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Feasibility Study

Every body use milk and milk products. A dairy is a place for handling milk and milk products. Technology refers to the application of scientific knowledge for purposes. Dairy technology has been defined as that branch of dairy science which deals with the processing of milk and the manufacture of milk products on an industrial scale. Milk is used as a food. Used as a complete food of infant. It is used in all homes. It is used in hotels and restaurants as milk food preparation and in the preparation of tea. If we compare India position w.r.t. other milk producing countries, of the world, we find that India has 53.0 million animals in milk, within buffalo milk/annum per buffalo-450kg (average) and total milk production = 2, 13, 60,000 MT/Year. So there is very good scope for new entrepreneurs.
Plant capacity: Farming 200 Cows, 5000 Ltrs/Day, Processed Milk 34000 Lts/DayPlant & machinery: 594 Lacs
Working capital: 440 LacsT.C.I: 1866 Lacs
Return: 58.00%Break even: 34.00%
Add to Inquiry Add to Inquiry Basket

Fully Automatic Match Box With Match Sticks (Wooden Match Sticks & Waxed Strips) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials

The various sizes and type of match boxes are largely used in all the homes commercial section shops and industries. The Match phosphorus coating labels in two narrow sizes. General purpose match boxes are generally made by using paper boxes, match stick carrier or filler made by paper and soft wood pieces which is shunt fitted in the box, carrier content match sticks and filled in the carrier then covered by the paper to form match boxes. Tiny small and medium scale matches factories are available in India. This is very large common used items not only in India but through out the word. There is very negligible export or import is available of this product. 5% growth demand of match boxes in each year. There is very good scope for new entrants.
Plant capacity: 1500 Lacs/AnnumPlant & machinery: 86 lacs
Working capital: -T.C.I: 213 Lacs
Return: 42.00%Break even: 43.00%
Add to Inquiry Add to Inquiry Basket

Liquid Glucose From Broken Ric - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Broken rice is the by-product of rice mill. It has various uses out of which one use is to prepare liquid glucose from broken rice. It can be processed from the F.C.I. Godown also. By using broken rice, starch can used as filler in the different variety of food products. About 90% of the liquid glucose produced in India is consumed by the confectionery industry. Its preparation of sugar candy. It standard confectionery being about 33%. It is used also in textile printing and in biscuit and tobacco canning. The rest of this is used in leather, textile pharmaceutical and other industries. The domestic demand for liquid glucose had been estimated as 4000 MT/annum of which 3000 tonnes are used in the confectionery plants and are therefore widely distributed in their crude from. They can be found in almost all fruits, vegetables and corns. Different countries are known to be using different agricultural sources for production of starch. Now a days there is very good scope of new investment in this line.
Plant capacity: 30000MT/AnnumPlant & machinery: 664 Lacs
Working capital: -T.C.I: Cost of Project 1107 Lacs
Return: 40.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Cans for Brewery Industry - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities,Plant Layout

Aluminium is an abundant metal and is readily available at a very stable price. Aluminium foil is being produced and converted on the most modern machinery. The foil industry is not content, however, to rest on its laurels, and new uses for foil, and improved foil specifications for existing uses, are constantly rought. The United Kingdom aluminium foil industry itself has been rationalized over the past ten years on an International scale in which some of the world’s largest companies are concerned. The United Kingdom foil industry today stands better organized and better equipped in very direction to serve its customers and to meet the demands of the future. It is used to filled up bear in the brewery industry. It is used to filled up the processed food for packing. It is used to filled up fruit juices, synthetic syrup. On that base it can be assumed that half of the share will go in the beverages industry. It is found that 11000 MT. product of aluminium can used in the beverage industry. There is good scope for new investment. Any entrepreneur can enter in this fields.
Plant capacity: 50000 Nos./dayPlant & machinery: 131 Lacs
Working capital: 139 LacsT.C.I: -
Return: 31.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

CEMENT PLANT - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

The general outlook for the cement industry is fulfilled the situation in a large body of Indian Industry, with a market rise in production failing to generate adequate profitability. In some quarters, the mini-cement plant has been following, since it opens up possibilities of exploiting small deposits of limestone in difficult and thereby contributes to the socialist pattern on the other hand. There has been a bright scope in setting up mini-cement plant. Indian Government is providing a scheme of soft loans to current units wishing to convert from wet to dry. With the combination of all these new development the industry may with luck play its full role in the national programme
Plant capacity: 500 MT/Day OR 10,000 BAGS/DAYPlant & machinery: Rs. 476.00 Lakhs
Working capital: Rs. 606 LacsT.C.I: Rs. 1307 Lacs
Return: 68.00%Break even: 35.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 12 of 248 | Total 2471 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 247 248   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top