REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Investment Opportunities & Business Ideas in Egypt- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 30 of 242 | Total 2419 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 30 241 242   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

BANANA AND ITS BY PRODUCTS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Banana is a fair source of calcium iron and a rich source of potassium magnesium, sodium & potassium. Because aids in combating diarrhoea intestinal lesions. Pected leaf sheaths are used fresh or after drying as packaging materials for flowers, betal leaves, fruits, etc. India is the second largest producer of banana after Brazil. Banana is cultivated in every part of the country. A small percentage of banana production is exported to USSR being lightly perishable in nature; there is need to process this fruit by manufacturing products such as figs, flour powder, banana pulp, etc. to cater the need of different society sections. There is a good marketing scope in metropolitan cities. The processed banana products has also a good export market.
Plant capacity: 54 MT / DayPlant & machinery: 18 Crores
Working capital: -T.C.I: 31 Crores
Return: 41.88%Break even: 37.93%
Add to Inquiry Add to Inquiry Basket

BANANA AND ITS BY PRODUCTS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Banana is a fair source of calcium iron and a rich source of potassium magnesium, sodium & potassium. Because aids in combating diarrhoea intestinal lesions. Pected leaf sheaths are used fresh or after drying as packaging materials for flowers, betal leaves, fruits, etc. India is the second largest producer of banana after Brazil. Banana is cultivated in every part of the country. A small percentage of banana production is exported to USSR being lightly perishable in nature; there is need to process this fruit by manufacturing products such as figs, flour powder, banana pulp, etc. to cater the need of different society sections. There is a good marketing scope in metropolitan cities. The processed banana products has also a good export market.
Plant capacity: 54 MT / DayPlant & machinery: 18 Crores
Working capital: -T.C.I: 31 Crores
Return: 41.88%Break even: 37.93%
Add to Inquiry Add to Inquiry Basket

FRESH FROZEN VEGETABLES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

There are thousands of frozen foods available. Before freezing, it is necessary to blend the product to destroy enzymes, which would result on off flavours and consequent quality deterioration. As frozen food preserves the vegetables, they don’t get spoiled even after months once they are kept in cold storage, some 250000 retail stores have frozen food departments and 75% of the industry output is sold through super markets. Today, frozen foods are available in retail and institutional outlets over all the areas of the country. The total annual commercial production is estimated to be more than 10 billion pounds. Obviously, what is produced must be marketed.
Plant capacity: 20 MT / DayPlant & machinery: 81 Lakh
Working capital: -T.C.I: 1090 Lakh
Return: 53.00%Break even: 31.00%
Add to Inquiry Add to Inquiry Basket

SEWING THREAD REELS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Sewing thread is a common household item and is the prime material for stitching purpose. Capren and lavsan used for the manufacture of sewing threads exhibit high chemical & physical properties. Now polypropylene yarns have replaced polyester threads. Sewing thread balls & reels have a great demand in Indian as well as foreign markets. Moreover, its manufacturing procedure is very simple. In the market there is a maximum demand for cotton reels & balls. Whereas, silk, viscose rayon and polyester cotton reels and balls are also available but these pose seasonal demand only.
Plant capacity: 2000 Nos. / DayPlant & machinery: 6 Lakhs
Working capital: -T.C.I: 13 Lakhs
Return: 48.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Osmotic Dehydration of Temperate and Subtropical Fruits (Osmosed amla, apricot, apple, citrus galgal peel, pear, peach, papaya, plum quince)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey

It is paradoxical that out of the total annual production of about 20 million tones of fruits, nearly 25% is lost due to spoilage during handling, transportation, processing, marketing and for lack of cold storage facilities. Hardly one percent of the total production of fruits and vegetables is utilized for processing and preservation. Even if one percent of this spoilage of fruits is prevented at the production centers by converting them into dehydrated products, there will be a saving of 20 million rupees to the horticulture wealth of the country. Fruits and vegetable preservation techniques based on canning, freezing and expensive packaging raise the cost of finished products manifold. Any dehydrated product will be cheaper in terms of canned and frozen products. Minimum labor requirement for production and packing and reduced distribution costs are the other advantages of the dehydrated products. An insignificant quantity of dehydrated fruit products are produced mainly from banana, mango, apricot and plums in the form of figs, leather and whole fruit. But these are spoiled during storage due to non-enzymatic browning, mold growth and also lead to irreversible textural changes in the product. Recently, instead of seeking stable products through extensive removal of water, interest is focused on the development of stable products by osmotic dehydration. Advantages of dehydration by direct osmosis over conventional methods are that it conserves the color, flavor and nutritive value of the fruit. Enzymatic browning does not occur during processing but the product may require protection to prevent subsequent browning. The fruit preservation industry has remained static in terms of products, therefore, has to look forward to the production and marketing of new products for the survival and growth on one hand and meet the demands of consumer’s new tastes and preferences on the other hand. Size independent techniques have been developed to produce osmosed dried quality product from perishable temperate and subtropical fruits e.g. amla, apple peach, apricot, plum, pear, cherries, quince, papaya, citrus galgal peel etc. The plant will work for 2 shifts of 8 hours each a day for 300 days a year. The plant is capable of processing a variety of seasonal fruits.
Plant capacity: 2 Tonnes / batch or 8 Tonnes / day, running 4 batches a day.Plant & machinery: 110 Lakh
Working capital: 63T.C.I: 208
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

FROZEN FOODS HAVING GOOD EXPORT AND DOMESTIC DEMAND - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Cost of Project

It is part of age-old human experience that food remains in fresh condition longer in cool than in warm weather. Hence it is not surprising that one of the first applications of mechanical refrigeration was to cool perishable food to prolong their storage life. It was claimed in 1968 that there were 2823 types of frozen foods, including 639 types of frozen vegetables, 446 frozen deserts, and 448 types of frozen seafood. It is further stated that 58% of the volume of frozen foods is fruit juices and vegetables. It is also said that frozen soups account for 11.4% and baked goods for 10.1%. Before freezing, it is necessary to blanch the product to destroy enzymes, which would result in off-flavours and consequent quality deterioration. Rapid freezing is important, since just as with ice cream, it results in a smoother product having smaller ice crystals and a more natural body and texture. In the first freezing systems the product was frozen by being subjected to high velocity air at temp. as low as 400F. The next important was that of the birds eye system, in which the product was frozen extremely rapidly, by being clamped tightly between very old refrigerated plants at – 20 to – 400F. This gave very rapid heat transfer and quick cooling resulting in marked improvement in the quality of both and vegetables the details of the system vary somewhat with the product the rate of freezing depends upon the size of packages but in usually on the order of ½ hr to 1 hr. Calculation of Refrigeration Requirements: Fruits and Vegetables are high in water content, and are absorbed much refrigeration. FREEZING Many vegetables are seasonal crops, abundant at certain times of the year, and not readily available at other times of the year. In order to extend availability all year round, methods of preservation are needed. These methods may alter the characteristics of the vegetables; some to a small extent, some to a large extent. They may also be effective over different time periods. Some extend shelf life by only a few weeks, some give a shelf-life of many months. The changes in the tissue characteristics consequent upon the preservation technique may be more market where long storage lives are required. for long-term storage, extending from months to years, canning (in which product is placed in a hermetically sealed container, and then heated sufficiently to achieve sterility) and freezing (in which product is cooled down to temperatures below – 200C and maintained at these temperatures) are the primary preservation techniques. Freezing is often preferred over canning, because the alternations to the tissues, such as softening and colour changes, may be less marked. Preservation by freezing makes use of the phenomenon that rates of chemical change are generally reduced at lower temperatures. Rates of physical change, too, may be reduced at sufficiently low temperatures, so that a product may be stored at low temperatures for extended periods without there being too much change in its properties compared to those it had at the commencement of the storage period. The freezing process itself, however, may result in change. There are commodities, such as lettuce, preservation of that particular commodity. It is generally true that the lower the temperature of storage, the slower the rate of change in properties. Because freezing involves the separation of some of the water in the product as ice, with consequent increase in the concentrations in the unfrozen phase, and potential crystallization or precipitation of other components, the rate of deterioration may be affected by factors other than the temperature linked slowdown. Higher solute concentrations may induce increased rates of change in some chemical processes (1). Also, low temperatures may enhance the rates of some crystallization processes. The rates of change in frozen systems could then be a complex function of temperature. There may be a temperature region with enhanced rates of change just below 00C in some systems. However, at sufficiently low temperatures, of rates of change will reduce. This is illustrated schematically in Figure. The upper line illustrates rate enhancement due to freezing. The lower line illustrates rate inhibition due to freezing. The centre line represents the rate to be expected on the predictions of the Arhenius rate expression. The arhenius expression in inappropriate for use in frozen systems, as it does not allow for the complex changes, which accompany the separation of crystalline ice, but assumes the system stays on uniform phase. It has recently been shown that, in systems containing ice, the temperature dependence of the kinetics in the unfrozen phase may better be described by an equation, known as the Williams-Landel-Ferry equation, which describes the temperature dependence of kinetics in rubbery systems. To-day frozen foods are available in retail and institutional outlets over all areas of the country. The total annual commercial production is estimated to be more than ten billion pounds. Obviously, what is produced must be marketed. To day some 250,000 retail stores have frozen food departments and 75 percent of the Industry out put is sold through supermarkets. The distribution channels of produce run through a long chain of middlemen by and large the processing industry gets its few materials from the maindis or wholesales markets. There are of course a few large units who have their orchard and farms. But even these depend extensively on mandis. The industry does not get preferential treatment in credit allocations. The raw materials used by it being highly perishable, the financial reckoning of security is extremely conservative. However, finished products are subjected to the usual norms for purposes of bank financing.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

TOMATO PULP - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Tomato pulp is very much popular item derived from tomato fruit. It is a ground form of tomato having only 6% solid content. A wide variety of products are available by processing tomato pulp. Tomato pulp is used for the production of a wide variety of tomato products like sauce, ketchup, juice, etc. By adding proper additions and keeping under specified conditions, tomato pulp can be preserved for a longer period. Other items like puree and cocktail. Processed fruits and vegetables have a very good potential in the export market. The food processing industry has a higher employment potential with a relatively low investment hence, there exists vast areas for new entrants for the development of this industry.
Plant capacity: 10,000 Bottles/Day Plant & machinery: 19 Lakhs
Working capital: -T.C.I: 158 Lakhs
Return: 51.00%Break even: 37.00%
Add to Inquiry Add to Inquiry Basket

FILTERATION AND AIRTIGHT PACKING OF COCONUT OIL - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Coconut oil, also known as coconut butter, is a tropical oil with many applications. It is extracted from copra (derived from the word "kopra" which means dried coconut). Coconut oil constitutes seven percent of the total export income of the Philippines, the world's largest exporter of the product. Coconut oil is a fat consisting of about 90% saturated fat. The oil contains predominantly medium chain triglycerides, with roughly 92% saturated fatty acids, 6% monounsaturated fatty acids, and 2% polyunsaturated fatty acids. Of the saturated fatty acids, coconut oil is primarily 44.6% lauric acid, 16.8% myristic acid a 8.2% palmitic acid and 8% caprylic acid, although it contains seven different saturated fatty acids in total. Its only monounsaturated fatty acid is oleic acid while its only polyunsaturated fatty acid is linoleic acid. Unrefined coconut oil melts at 24-25°C (76°F) and smokes at 170°C (350°F),while refined coconut oil has a higher smoke point of 232°C (450°F). Among the most stable of all oils, coconut oil is slow to oxidize and thus resistant to rancidity, lasting up to two years due to its high saturated fat content.[citation needed] In order to extend shelf life, it is best stored in solid form (i.e. below 24.5°C [76°F]). Coconut oil is used in volume quantities for making margarine, soap and cosmetics.Hydrogenated or partially-hydrogenated coconut oil is often used in non-dairy creamers, and snack foods.Fractionated coconut oil is also used in the manufacture of essences, massage oils and cosmetics Coconut oil is an important component of many industrial lubricants, for example in the cold rolling of steel strip.Coconut oil has to be refined and filtered, and then only it can be used for edible purposes. The fine primary functions for are: hygiene, protection, customer convenience, identification & sales appeal and facts. Coconut oil is used in India as a cooking fat, hair oil, body oil and industrial oil. Coconut oil is made from fully dried copra having maximum moisture content of six per cent. Steam cooking of copra is also practised by some millers to enhance the quality and aroma of oil. Coconut oil is marketed in bulk as well as in packs ranging from sachets containing 5 ml. to 15kg tins. The branded coconut oil in small packs is mainly marketed as hair oil and body oil. There are several brands known for their superior grade oil which have export market throughout the world. India has unbeatable quality advantage in this sector. Refined coconut oil is also manufactured in the country for industrial uses. Refined coconut oil is mainly used in the manufacture of biscuits, chocolates and other confectionery items, ice cream, pharmaceutical products and costly paints. Generally, filtered coconut oil is used for cooking and toiletry purposes. India accounts for nearly 20% of global coconut output. Coconut oil is the main cooking oil in the south Indian State of Kerala. Kerala, Tamil Nadu, Andhra Pradesh and Maharashtra are leading producers of coconut in the country. Kerala and Tamil Nadu are the major centres of coconut oil and copra in the country. Besides cooking coconut oil is also used extensively on cosmetics, toiletries, hair tonics and slew of other industries. The price of coconut oil is shaped by variations in production, global demand and supply situation and price of other vegetable oils.
Plant capacity: 600 Tons/Annum Plant & machinery: 19 Lakhs
Working capital: -T.C.I: Cost of Project : 94 Lakhs
Return: 43.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

FILTRATION AND AIRTIGHT PACKING OF COCONUT OIL - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Coconut oil, also known as coconut butter, is a tropical oil with many applications. It is extracted from copra (derived from the word "kopra" which means dried coconut). Coconut oil constitutes seven percent of the total export income of the Philippines, the world's largest exporter of the product. Coconut oil is a fat consisting of about 90% saturated fat. The oil contains predominantly medium chain triglycerides, with roughly 92% saturated fatty acids, 6% monounsaturated fatty acids, and 2% polyunsaturated fatty acids. Of the saturated fatty acids, coconut oil is primarily 44.6% lauric acid, 16.8% myristic acid a 8.2% palmitic acid and 8% caprylic acid, although it contains seven different saturated fatty acids in total. Its only monounsaturated fatty acid is oleic acid while its only polyunsaturated fatty acid is linoleic acid. Unrefined coconut oil melts at 24-25°C (76°F) and smokes at 170°C (350°F),while refined coconut oil has a higher smoke point of 232°C (450°F). Among the most stable of all oils, coconut oil is slow to oxidize and thus resistant to rancidity, lasting up to two years due to its high saturated fat content.[citation needed] In order to extend shelf life, it is best stored in solid form (i.e. below 24.5°C [76°F]). Coconut oil is used in volume quantities for making margarine, soap and cosmetics.Hydrogenated or partially-hydrogenated coconut oil is often used in non-dairy creamers, and snack foods.Fractionated coconut oil is also used in the manufacture of essences, massage oils and cosmetics Coconut oil is an important component of many industrial lubricants, for example in the cold rolling of steel strip.Coconut oil has to be refined and filtered, and then only it can be used for edible purposes. The fine primary functions for are: hygiene, protection, customer convenience, identification & sales appeal and facts. Coconut oil is used in India as a cooking fat, hair oil, body oil and industrial oil. Coconut oil is made from fully dried copra having maximum moisture content of six per cent. Steam cooking of copra is also practised by some millers to enhance the quality and aroma of oil. Coconut oil is marketed in bulk as well as in packs ranging from sachets containing 5 ml. to 15kg tins. The branded coconut oil in small packs is mainly marketed as hair oil and body oil. There are several brands known for their superior grade oil which have export market throughout the world. India has unbeatable quality advantage in this sector. Refined coconut oil is also manufactured in the country for industrial uses. Refined coconut oil is mainly used in the manufacture of biscuits, chocolates and other confectionery items, ice cream, pharmaceutical products and costly paints. Generally, filtered coconut oil is used for cooking and toiletry purposes. India accounts for nearly 20% of global coconut output. Coconut oil is the main cooking oil in the south Indian State of Kerala. Kerala, Tamil Nadu, Andhra Pradesh and Maharashtra are leading producers of coconut in the country. Kerala and Tamil Nadu are the major centres of coconut oil and copra in the country. Besides cooking coconut oil is also used extensively on cosmetics, toiletries, hair tonics and slew of other industries. The price of coconut oil is shaped by variations in production, global demand and supply situation and price of other vegetable oils.
Plant capacity: 600 Tons/Annum Plant & machinery: 19 Lakhs
Working capital: -T.C.I: Cost of Project : 94 Lakhs
Return: 43.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

Water Park - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project, Profitability Ratios

In ancient India, there was large use of water in the Tapovana, and different Ashrams in the forests. Elephanta caves in the Maharashtra can be considered as water park. Now the water park is the good idea of amusement. It is very good assets created by human being to enjoy the natural scenery artificially, if situated near by forest or hilly area. Water Park is the generic term for a collection of water rides and other entertainment attractions assembled for the purpose of entertaining a large group of people. A water park is more elaborate than a simple city park or playground, usually providing attractions meant to cater to adults, teenagers, and small children. A theme water park is a type of amusement park which has been built around one or more themes, such as an American West theme, or Atlantis. Today, the terms water parks and theme parks are often used interchangeably. Amusement water parks generally feature a few water rides, such as the log flume, bumper boats, and rowing boats. Such rides are usually gentler and shorter than roller coasters and many are suitable for all ages. Water rides are especially popular on hot days.
Plant capacity: 1000 visitors / DayPlant & machinery: 84 Lakhs
Working capital: -T.C.I: 362 Lakhs
Return: 41.00%Break even: 38.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 30 of 242 | Total 2419 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 30 241 242   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top