REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Food Processing and Agriculture Based Projects, Snack Food, Frozen Food, Agro Processing Technology, Processed Food, Instant Food, Food Industry, Food Preservation, Canned Food, Packed Food, Ready to Eat Food, Cereal Food, Pickle, Spices, Grain Milling

India has a major agribusiness sector which has achieved remarkable successes over the last three and a half decades. Unprocessed foods are susceptible to spoilage by biochemical processes, microbial attack and infestation. The right post harvest practices such as good processing techniques, and proper packaging, transportation and storage (of even processed foods) can play a significant role in reducing spoilage and extending shelf life. The industry consists of segments like processed fruits and vegetables, cereal based products, dairy products, meat, poultry and fishery products, beverages and confectionery.

The global processed food market is estimated at $3.2 trillion. The Indian food market is estimated at $182 billion. Food processing industry in India is growing at 14% annum.The total food production in India is likely to double in the next ten years and there is an opportunity for large investments in food and food processing technologies especially in areas of canning, dairy and food processing, specialty processing, packaging, frozen food or refrigeration and thermo Processing. Fruits & vegetables, fisheries, milk & milk products, meat & poultry, packaged or convenience foods, alcoholic beverages & soft drinks and grains are important sub-sectors of the food processing industry. Health food and health food supplements are another rapidly rising segment of this industry which is gaining vast popularity amongst the health conscious. Coming to the snack food sector, application of modern technology has helped in enriching the quality of produce. It has tremendous growth opportunities in the country. Growing population, rapid urbanization, changing consumer preferences etc are expected to keep the demand increasing in future too. With a well-integrated supply chain and a good marketing strategy, a tremendous opportunity lies for snack food industry in India.

India's food processing industry is expected to benefit from this and grow to around $260-billion from the present USD 200-billion in the next 6-years, according to industry expert. It is estimated that potential for processed foods is estimated to reach from Rs 8,200-billion in 2009-10 to Rs13, 500-billion by 2014-15. India produces 41% of the world's mangoes, 30% of cauliflowers, 28 per cent of tea, 23% of cashews, 36 per cent of green peas and 10% of onions.The Indian diary sector is around $ 62 b and will grow to $108 b. The Indian food production is estimated at 500 million tonnes and food processing industry has immense potential.India is a large and growing market for food products as it is growing at about 1.6%annum. On the global food sector, the food products industry is expected to reach $3,137.2-billion by 2011.

In India, only 6% of total agro output of India is currently processed as against 80% in some developed countries leaving a large potential to be tapped in this sector.

The Indian government has formulated a Vision 2015, to triple the size of the food processing industry, from the current $ 70 b to around $ 210 b, enhancing her global share to 3%, increasing value addition to 35%, from the current 20% and raising the level of processing of perishables to 20%.The most promising sub-sectors includes -Soft-drink bottling, Confectionery manufacture, Fishing, aquaculture, Grain-milling and grain-based products, Meat and poultry processing, Alcoholic beverages, Milk processing, Tomato paste, Fast-food, Ready-to-eat breakfast cereals, Food additives, flavors etc.

How to Come Up With Agriculture Project Ideas?

The success of any agriculture-based project ideas begins with identifying the right business idea. If you are planning to start a profitable business in the agriculture industry, the first step will be to identify a project idea. I believe the following tips will help you come up with a practical project idea in agriculture.

1. Assess your Interests

You need to understand your interests in agriculture. You can start by making a list of various business areas in agriculture. These include dairy farming, horticulture, poultry, floriculture, agro-processing industry, etc. Next, review your interests and aspirations to identify an idea in these areas that are consistent with your interests. A business based on ideas that you have little personal interests may not survive future challenges.

2. Assess your level of Skills and Knowledge

The agriculture and agro-processing industry require continuous innovation and rebranding. You need adequate skills and knowledge in your preferred field. These skills help you to keep up with the high level of competition. If you have some skills in grafting tree seedlings or managing a hatchery or a slaughterhouse, let your business idea reflect that skill. 

3. Your financial ability

Consider the required financial inputs against your financial ability. You may also explore other methods or raising capital, such as bank loans or shareholding.

4. Market potential

I do not think you want to start a farming project or a msme food processing factory as a hobby; you want to make profits. Therefore, before you working on a project report, survey the market. Is the demand for your intended product adequate to sustain your business? What is the level of competition?  

Role of Agriculture and Agro Food Processing Industry

Agriculture is as old as human civilization. Today, it remains a key economic growth factor around the world. You notice that agricultural practices and the use of technology is very different between developed and developing countries. Whereas developed countries use farm machinery to lower costs and increase production, developing countries rely on human labor. Human labor is expensive and has lower efficiency. Agro food processing industries play a crucial role in modernizing farming and food processing.

We can summarize the role of agriculture and the agro-processing industry as follows:

  • Source of income to the farmers and manufacturers
  • Source of revenue to governments
  • Value addition to farm produce
  • Sources of employment
  • Reduce food wastage through processing and preservation
  • Enhance world food security

How to Set Up a Successful Food Processing Industry?

Do you want to start a food processing unit? Well, my task is to help you get started. Here are some tips that you might find helpful in starting a food production industry.

1. Get an Ideal Business Idea

There are many types of food processing project ideas. Know what you want to do and produce. Make a clear, precise description of your product, including its specifications and benefits to the buyer.

2. Carry out a Market Survey

Do some surveys and write a project feasibility report. This report helps you understand the market before you make your investment. From the report, identify how many food production companies there are in your locality. Get to know your competitors and the level of competition. Strategize on how to do marketing and branding to penetrate the processed food industry.

3. Develop a Management Structure

Clearly outline how you will manage company operations. This includes sourcing of raw farm produce, transport, storage, processing, marketing, etc.

4. Conform to legal requirements

Make sure you get all licenses relevant to food processing unit and packaging. Familiarize yourself with the requirements of the Food Safety and Drug Administration Authority and ensure full compliance.

5. Establish clear food safety procedures

You need to develop measures to ensure food that there is no contamination of food during either processing or packaging.

How Agro-Processing Technology helps in the Growth of Agriculture Industry?

When food-processing technology evolved during and after World War II, there was an increase in large-scale food manufacturing companies' lists. Trends in food distribution changed, and with it came a rise in quality of life.

The purposes of agriculture industry include:

  • Value addition for raw farm produce
  • Income generation for farmers
  • Reduce unemployment
  • Contribute to economic development

In the agro-processing industry, you will find a range of technologies. The simplest technologies include simple drying. More advanced technologies include irradiation techniques. I may categorize the role of technology in food processing companies into three areas of application:

1. Utilization of by-products

You can process residues such as hides, rice husks, and dung into useful products with appropriate technology.

2. Reduce farm loses

Without technology, tons of farm produce rot or lose value under storage. We can avoid this by:

  • Postharvest disinfection
  • Inducing dormancy
  • Extending produce shelf-life
  • Limiting the spread of food-borne infections
  • Improve food preservation

You can use irradiation, freezing, and other technologies to lengthen the shelf life of food processing products.

Project Report on Processed Food Industry

There are numerous profitable examples of most profitable food processing business ideas. You probably have your eyes set on one of them. Writing a food manufacturing business idea project report is one of the initial steps you must undertake. Some of the things you need to consider in your technical project report for a food-processing unit include:

1. Market Review

There are many business opportunities in the food production industry. Before you write that project status report, identify your target market. Find out if there are other manufacturers of the same product, you wish to introduce. Another thing you must establish is the demand for your product and current market prices. This should inform your production cost.

2. Technology

You can process the same food products in different ways. Find out the most affordable and acceptable production procedure and technology. Some consumers may also prefer foods processed in a particular manner. You should consider this in selecting your process.

3. Investment opportunities

If you develop an excellent industrial project report, you will tell whether your intended product is worth investment or not. An excellent investment opportunity should offer low inputs and high returns. Consult with food processing machinery manufacturers to establish the cost of machines and food processing equipment. Factor this on the production coast and compare with expected profits from the sale of your products.

 

 

Reasons for buying our reports:

This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, market potential of the product and reasons for investing in the product

This report provides vital information on the product like its characteristics and segmentation

This report helps you market and place the product correctly by identifying the target customer group of the product 

This report helps you understand the viability of the project by disclosing details like machinery required, project costs and snapshot of other project financials

The report provides a glimpse of government regulations applicable on the industry

The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decisions.

 

Our Approach:

Our research reports broadly cover Indian markets, present analysis, outlook and forecast for a period of five years.

The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players

We use reliable sources of information and databases. And information from such sources is processed by us and included in the report

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 21 of 95 | Total 950 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 21 94 95   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

COCONUT OIL FROM COPRA - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Coconut oil, also known as coconut butter, is a tropical oil with many applications. It is extracted from copra (derived from Malayalam word "kopra" which means dried coconut). Coconut oil constitutes seven percent of the total export income of the Philippines, the world's largest exporter of the product. Coconut oil was developed as a commercial product by merchants in the South Seas and South Asia in the 1860s. Coconut oil is a fat consisting of about 90% saturated fat. The oil contains predominantly medium chain triglycerides, with roughly 92% saturated fatty acids, 6% monounsaturated fatty acids, and 2% polyunsaturated fatty acids. Of the saturated fatty acids, coconut oil is primarily 44.6% lauric acid, 16.8% myristic acid a 8.2% palmitic acid and 8% caprylic acid, although it contains seven different saturated fatty acids in total. Its only monounsaturated fatty acid is oleic acid while its only polyunsaturated fatty acid is linoleic acid. Unrefined coconut oil melts at 24-25°C (76°F) and smokes at 170°C (350°F), while refined coconut oil has a higher smoke point of 232°C (450°F). Among the most stable of all oils, coconut oil is slow to oxidize and thus resistant to rancidity, lasting up to two years due to its high saturated fat content.[citation needed] It is best stored in solid form, below 24.5°C (76°F) in order to extend shelf life. However, unlike most oils, coconut oil will not be damaged by warmer temperatures. Globally 5.5 million tons of coconuts are produced annually. Indonesia, Philippines and India are top three leading producers with production share- 27%, 23% and 22% respectively. SriLanka, Mexico, Vietnam, New Guinea and Brazil are other important producers. 3 – 3.5 million tons of coconut oil is produced annually around the world while consumption figure globally is around 3.8 million tons. Annually around 2 lakh ton raw copra, 1 lakh ton meal and 3.5 lakh ton coconut oil is traded worldwide. Indonesia, Philippines, SriLanka are important market for coconut and copra India produces around 12141 million nuts of coconut, 6.5 – 7 lakh ton of copra Oil recovery from copra is 65 - 72%, annually 4 – 4.5 lakh tons of coconut oil is produced in the country SEA of India has forecasted 6.5 lakh tons of copra and 4.2 lakh coconut oil production in 2005-06. The production is highly dependent on the monsoon and incidence of pest and diseases and fluctuates between years. India imports around 2000 – 7000 tons of crude coconut oil. There is a good scope for new entrants.
Plant capacity: 10 Ton / DayPlant & machinery: 33 Lakh
Working capital: -T.C.I: 358 Lakh
Return: 50.00%Break even: 36.00%
Add to Inquiry Add to Inquiry Basket

SUNFLOWER OIL - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Sunflower oil is the non-volatile oil expressed from sunflower (Helianthus annuus) seeds. Sunflower oil is commonly used in food as a frying oil, and in cosmetic formulations as an emollient. Sunflower oil contains predominantly linoleic acid in triglyceride form. The British Pharmacopoeia lists the following profile: Palmitic acid : 4 - 9%, Stearic acid : 1 - 7%, Oleic acid : 14 - 40%, Linoleic acid : 48 - 74%. There are several types of sunflower oils produced, such as high linoleic, high oleic and mid oleic. High linoleic sunflower oil typically has at least 69% linoleic acid. High oleic sunflower oil has at least 82% oleic acid. Variation in fatty acid profile is strongly influenced by both genetics and climate. Sunflower oil also contains lecithin, tocopherols, carotenoids and waxes. Sunflower oil's properties are typical of a vegetable triglyceride oil. Sunflower oil is produced from oil type sunflower seeds. Sunflower oil is light in taste and appearance and has a high Vitamin E content. It is a combination of mono-unsaturated and polyunsaturated fats with low saturated fat levels. Sunflower oil is liquid at room temperature. The refined oil is clear and slightly amber-colored with a slightly fatty odor. As a frying oil, sunflower oil behaves as a typical vegetable triglyceride. In cosmetics, it has smoothing properties and is considered noncomedogenic. Only the high-oleic variety possesses shelf life sufficient for commercial cosmetic formulation. Sunflower oil's INCI name is Helianthus Annuus (Sunflower) Seed Oil. Sunflower is classified into botanical family of composital and into the species of helianthus annus. A small genus of annus or prennial herbs, mostly natives of central and South America. Sunflower is an annual herb with erect, rough, hairy stem. In recent years, it has gained importance as an oil-seed crop in Argentina, U.S.A. and Canada. The sunflower oil production of the world is around 8-9 million tons in a normal year. The exports are traditionally around 30% of the total production. It is expected that around 3 million tons of oil will be exported in 2005-06. Russia and Ukraine are respectively the first and second largest producer of sunflower seed in the World. The other major producers are Argentina, France, Romania, Hungary, China, India and United States of America. Currently, sunflower seed accounts for around 8% of the world's total oilseed production and sunflower oil accounts for 9% of the global edible oil production. Currently, sunflower seed accounts for around 8% of the world's total oilseed production and sunflower oil accounts for 9% of the global edible oil production. In India, sunflower is grown both in the kharif and rabi season. However, around 70% of the crop is produced in the rabi (November – March) season. The kharif (June – September) period accounts for less than 30% of the crop currently. Indian sunflower seed production ranges between 10-15 lakh tons. The major producers are Karnataka (35%), Andhra Pradesh (30%), Maharashtra (15%), Punjab (4%) and Haryana (4%). In India the average yield of oil obtained by mechanical extraction from sunflower seed is 35 % from unshelled seed of normal moisture content (9%) and 42.5% by pre-press and solvent extraction. Crude oil to refined oil conversion rate is 95%.
Plant capacity: 1 MT / DayPlant & machinery: 7 Lakh
Working capital: -T.C.I: 65 Lakh
Return: 51.00%Break even: 37.00%
Add to Inquiry Add to Inquiry Basket

Investment Opportunity in Beer Industry - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Production Schedule

Among the alcoholic drinks, Beer is quite common and popular in almost every Country of the World. People of different countries take beer in varying much like a soft drink in European countries it is just a substitute of water. The alcoholic contents and main source stuff also keep varying according to the tests of the major part of population of the particular country although it is a fashion to ask for beer of every origin in every country. Formulations of beer manufacturing are done with the view of availability of the raw materials in that particular part of the World where the brewery is proposed to be established. In most of the parts of the world, barley is universal source of beer extraction. But, beers are manufactured from Chamomile flowers and powdered gingers etc. as well. The manufacturing processes and quality control measure, can make the beer nutrition’s, energy packed and refreshing. Among all the alcoholic drinks beer has become so common. Beer in the Western countries is the important constituent of daily food. The most important characteristic of drink is to keep body warm and certain refreshness throughout the body. Beer is the dilute alcoholic product. Barley is extensively employed for manufacture of malt used in brewing and distilling of beer. If we categorize beer, we find four categories as follows. Pale Beer – Lagers, wheat Beer, Pale ales (Bitter Beer). Dark Beer – Dark Lagers, Porter, Stout, Mils ales (Brown ale) Strong Beer – Black Beer, Kafir Beer, Iactic Beer. Special Beer etc. The Indian beer industry seems to be in upswing mode as 2006 seems to be the best year as far as the growth is considered. Last year there was a growth of 20% while in the last five years the industry registered a growth of 7 to 8% year on year basis. The total beer industry was around 108 million cases in 2005, which crossed 130 million cases in 2006. Industry analysts say tax and levies on beer are anticipated to fall over the next 2 to 3 years, driving down retail prices by 25 to 50%. It is estimated that beer will sell for Rs 15 to Rs 20 per 330 ml can and Rs 20 to Rs 30 per 650 ml bottle in the coming year with the reduction tax and levies. In fact, northern Indian states, which have traditionally shown a preference for hard liquor over beer, witnessed a jump of more than 100% in beer consumption in 2006 as compared to last year. The per capita consumption of beer in India is very low as compared to other countries in Europe and America. At present the per capita consumption is 0.7 litre per annum, but industry experts predict that this may rise to around 20 litres in the next 10 years. Considering the expected increase in consumption and the current growth trends, the future of Indian beer market looks bright and seems set for continuous double digit growth in the coming years.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Maize and its by products (Starch, Oxidized Starch, Liquid Glucose and Dextrose)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials

-
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Pan Masala - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

-
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Dairy Products (Skimmed Milk Powder, Butter, Ghee, Paneer)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

-
Plant capacity: Skimmed Milk Powder 1800 Kgs., Butter 500 Kgs.,Ghee 600 Kgs.,Paneer 200 Kgs.Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Refined oil (Cotton seed, Ground Nut Oil & Sunflower Oil)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

-
Plant capacity: 12 Ton/DayPlant & machinery: Rs. 31 Lakhs
Working capital: -T.C.I: Rs. 353 Lakhs
Return: 51.00%Break even: 36.00%
Add to Inquiry Add to Inquiry Basket

Corn Flakes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

-
Plant capacity: 2 Ton/DayPlant & machinery: Rs. 11 Lakhs
Working capital: -T.C.I: Rs. 66 Lakhs
Return: 50.00%Break even: 39.00%
Add to Inquiry Add to Inquiry Basket

Rice Flakes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

-
Plant capacity: 10 Ton/DayPlant & machinery: Rs. 21 Lakhs
Working capital: -T.C.I: Rs. 141 Lakhs
Return: 51.00%Break even: 37.00%
Add to Inquiry Add to Inquiry Basket

POTATO POWDER (Automatic Plant)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Potato is one of the important tuber vegetable, which is consumed throughout the year. It can be consumed in varied forms. In fact, it is a vegetable that can easily be combined with any other food item including other vegetables, cereals, pulses, meat and poultry. Potato powder is highly concentrated and nutritious flour ground from the pulp of cooled potato. The potato powder is used as thickening agent in soups, stews and for breading meats and fish. It is used extensively by armed forces, the civilian trade and the school lunch programme. There are about 15-20 units engaged in the manufacture of dehydrated and powdered potato. Although domestic market for dehydrated and powdered potato is there but more than70% of the total indigenous production of potato powder is exported to various countries. India is one of major potato producing countries in the world. It is estimated that 70 % of potatoes are consumed as fresh or processed. There is a bright scope for starting up a new unit of the same.
Plant capacity: 4 Ton / DayPlant & machinery: 2 Crores
Working capital: -T.C.I: 5 Crores
Return: 37.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 21 of 95 | Total 950 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 21 94 95   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top