Business Ideas & Investment Opportunities in Oman, Middle East- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 41 of 68 | Total 675 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 41 67 68   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Gypsum Plaster Board

Gypsum board, also known as “drywall” or “plaster board,” consists of a core of gypsum surrounded with a paper covering. These gypsum board products include regular gypsum wallboard, moisture-resistant gypsum board, and type-X fire-resistant gypsum board. Natural gypsum is a common mineral that is easily mined or quarried. It is generally found close to the surface of the earth. Synthetic Gypsum is a by-product of cleaning the emissions of the coal burning power plants. When the coal burns, Sulfur Dioxide (SO2) is captured in the coal stacks soit is not released into the environment. Gypsum is a mineral found in sedimentary rock formations in a crystalline form known as calcium sulfate dihydrate CaSO4•2H2O. One hundred pounds of gypsum rock contains approximately 21 pounds (or 10 quarts) of chemically combined water. Gypsum Plaster Boards are constructional sheets composed of consigned Gypsum with about 15% fibre. Gypsum plaster boards are selected for use according to their type, size, thickeners and edge profit.We actively encourage a culture of innovation, which facilitates the development of new technologies and ensure a high quality product.
Plant capacity: Gypsum Plaster Board (Size 2440x1220x12 mm):10000 Sq.Mt./dayPlant & machinery: 549 lakhs
Working capital: -T.C.I: Cost of Project: Rs 3188 lakhs
Return: 21.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Maize and It’s by Products (Maize Starch, Sorbitol, Liquid Glucose, Dextrose Monohydrate, Dextrose Anhydrous, Gluten and Maltodextrin)

Maize also known as corn is a cereal grain. Maize has become a staple food in many parts of the world, with total production surpassing that of wheat or rice. All the major sweeteners are commercially made from maize starch. Maize starch is a polymer of anhydrous glucose units (dextrose) and is the raw material for sweeteners. Dextrose equivalence (DE) is a measure of the total reducing sugars calculated as D-glucose on a dry weight basis. Maltodextrins are the dried products or puri?ed aqueous solutions of saccharides obtained from edible starch having a dextrose equivalency of less than 20. Glucose syrups, also known as corn syrups in the US, are puri?ed aqueous solutions of nutritive saccharides obtained from edible starch having a dextrose equivalency of 20 or more. Dextrose monohydrate is puri?ed, crystalline D-glucose containing one molecule of water of crystallization per molecule of D-glucose. Anhydrous dextrose is puri?ed, crystalline D-glucose without water of crystallization. Glucose is a monosaccharide (or simple sugar) also known as grape sugar, blood sugar, or corn sugar, is a very important carbohydrate in biology. The living cell uses it as a source of energy and metabolic intermediate. Maize is cultivated on nearly 178 million Ha globally in about 160 countries and contributes ~50% (1,170 million MT) to the global grain production. In India, maize constitutes ~9% of the total volume of cereals produced and is the third most important food grain after rice (~42%) and wheat (~38%). Advance estimates for total production in India stands at 9.3 million MT in trade year 2015, growing at ~6% in the past 5 years. This is mainly because the area under kharif maize (2016-17) saw a jump to 84.26 lakh ha. About twelve states which include Maharashtra, Bihar, Orissa, Uttar Pradesh, Uttarakhand and Delhi account for over 50 percent of the total maize acreage in the country. Increasing demand from Poultry sector is likely to substantially hike maize consumption to go over 30 million tons by 2020. As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players are as under • Amaravati Agro Ltd. • Avinash Impex Pvt. Ltd. • Charoen Pokphand Seeds (India) Pvt. Ltd. • Continental Milkose (India) Ltd. • Devi Corn Products Ltd. • Fieldfresh Foods Pvt. Ltd.
Plant capacity: Maize Starch : 60MT/Day Sorbitol : 30MT/Day Liquid Glucose: 30MT/Day Dextrose Monohydrate: 30MT/Day Dextrose Anhydrous: 15MT/Day Gluten Plant & machinery: 6690 lakhs
Working capital: -T.C.I: Cost of Project: Rs10721 lakhs
Return: 27.00%Break even: 41.00%
Add to Inquiry Add to Inquiry Basket

Ready Mix Concrete with Concrete Blocks

Ready mix concrete has advantages in the area where immediate requirement of concrete mixture like in the preparation of bridge overhead roads on or the road construction. In India there is a hope to get good scope of RMC within short period. The batching, mixing, transportation, placing, compaction, finishing and curing are very complimentary operations to obtain desired good quality concrete. The good quality concrete is a homogeneous mixture of water, cement, aggregates and other admixtures. Concrete blocks for building houses were first made in Europe around 1850. The mass-production of concrete blocks under way in step with the development of the cement industry chiefly in Western Countries around 1918. These include crushed stone, gravel, sand coral, volcanic cinders, slag, foamed slag, furnace clinker etc. Ready mix concrete utilizing a continuous batching process or metered concrete system. The volumetric mobile mixer is a truck that holds sand, rock, cement, water, fiber, and some add mixtures and color depending on how the batch plant is outfitted. As a whole there is a good scope for new entrepreneur to invest in this business.
Plant capacity: Ready Mix Concrete: 300 Cu.Mtrs /day Concrete Blocks (Size 400x100x200 mm): 250 Cu.Mtrs /dayPlant & machinery: Rs 83 lakhs
Working capital: -T.C.I: Cost of Project : Rs 586 lakhs
Return: 29.00%Break even: 69.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Rolling Mill

Aluminium foil is aluminium prepared in thin metal leaves, with a thickness less than 0.2 millimetres (8 mils), thinner gauges down to 6 µm (0.2 mils) are also commonly used. Standard household foil is typically 0.016 millimetres (0.6 mils) thick and heavy duty household foil is typically 0.024 millimetres (0.9 mils). Aluminium foil is produced by rolling sheet ingots cast from molten aluminium, then re-rolling on sheet and foil rolling mills to the desired thickness, or by continuously casting and cold rolling. Aluminium foil is a thin sheet of metal. As such it can be an absolute barrier to moisture, gases, odors, bacteria and moulds. There are around 10 Major Aluminium Foil manufacturers in India with rolling capacity of around 10000 tons per month to cater the total demand of around 12000 tons per month in different field of pharmaceuticals and flexible packaging industries. In the present scenario, market demand of the product is growing with a rate of 14.5% per annum. Global demand for aluminium foil is forecast to expand 8.7% p.a. between 2014 and 2018. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under • Amco India Ltd. • Annapurna Foils Ltd. • Archer Metal Ltd. • E C K Haubold & Laxmi Ltd. • Flex Art Foil Ltd. • Gallium Industries Ltd.
Plant capacity: Aluminium Foil Food Grade (thickness 0.006 mm to 0.150 mm): 24 MT/DayPlant & machinery: Rs 310 lakhs
Working capital: N/AT.C.I: Cost of Project: Rs 1252 lakhs
Return: 29.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Wall Paper Starch

Starches are inherently unsuitable for most applications and, therefore, must be modi?ed chemically and/or physically to enhance their positive attributes and/or to minimize their defects. Chemical modi?cation of starch generally involves esteri?cation, etheri?cation or oxidation of the available hydroxyl groups on the B-D-glucopyranosyl units that make up the starch polymers.i Reactions used to produce most commercially modi?ed starches have been reviewed by others. Many commercial derivatives are produced by the addition of reactive, organic reagents to aqueous starch slurries while controlling alkalinity (pH 7–9 for esteri?cation and pH 11–12 for etheri?cation) and temperature (typically 60°C). The wall paper starch is used in the fixing of the wallpaper on the walls. This is implied that this shall be directly connected with construction industry and its opportunities. The demand for starches and derivatives looks very promising in India as all the major user segments of starches and derivatives are showing near double digit growth in their production. The major users of starches and derivatives are food, textile, paper and pharma sectors. Global Modified Starch Market was valued at $7,995 million in 2016, and is projected to reach at $10,700 million by 2023, growing at a CAGR of 4.2% from 2017 to 2023. Modified starch is formed by morphological or physicochemical changes in the structure of native starch via its treatment with heat, acids, alkalis, or enzymes. As a whole entrepreneur can venture in this field will be successful.
Plant capacity: Wall Paper Starch: 32 MT /DayPlant & machinery: Rs 52 lakhs
Working capital: N/AT.C.I: Cost of Project: Rs 367 lakhs
Return: 29.00%Break even: 72.00%
Add to Inquiry Add to Inquiry Basket

Maize and It’s by Products Starch, Liquid Glucose, Dextrose, Sorbitol, Maltose, Gluten, Germ and Fiber)

Maize also known as corn is a cereal grain. Maize has become a staple food in many parts of the world, with total production surpassing that of wheat or rice. However, not all of this maize is consumed directly by humans. Some of the maize production is used for corn ethanol, animal feed and other maize products, such as corn starch and corn syrup. Maize is the starch derived from the corn (maize) grain. The starch is obtained from the endosperm of the kernel. D-Soribitol, CH2OH(CHOH)4CH2OH (D-glucitol, L-gulitol), is a hexahydric alcohol with a 6-carbon atom straight-chain that contains six hydroxyl groups, and has a molecular weight of 182.17. The germ, which constitutes 8-14% of the total weight of the corn grain, includes 84-86% of the total oil content of the corn. In India, maize is a kharif crop with harvests and arrivals due only from October onwards. Kharif contributes over 80 per cent of the entire maize output. Bulk of the maize produced in the country goes for production of poultry feed. It is estimated that the demand for maize from the poultry industry would rise by about 6 percent. About twelve states which include Maharashtra, Bihar, Orissa, Uttar Pradesh, Uttarakhand and Delhi account for over 50 percent of the total maize acreage in the country. Increasing demand from Poultry sector is likely to substantially hike maize consumption to go over 30 million tons by 2020. As a whole there is a good scope for new entrepreneur to invest in this business. Few Indian major players are as under • Amaravati Agro Ltd. • Avinash Impex Pvt. Ltd. • Charoen Pokphand Seeds (India) Pvt. Ltd. • Continental Milkose (India) Ltd. • Devi Corn Products Ltd. • Fieldfresh Foods Pvt. Ltd. • Gayatri Bioorganics Ltd.
Plant capacity: Maize Starch: 17520 MT /Annum Sorbitol: 3000 MT/Annum Liquid Glucose: 3000 MT/ Annum Dextrose Monohydrate: 3000 MT/ Annum Dextrose Anhydrous: 1500 MT/ Annum Gluten: 4590 MT/ Annum Maltodextrin: 1500 MT/ Annum GePlant & machinery: 4160 lakhs
Working capital: -T.C.I: Cost of Project: Rs 6928 lakhs
Return: 12.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

Pre-Stressed Concrete Electric Poles

PSC poles stands for pre-stressed concrete. These are highly durable and strong PSC Poles fabricated from excellent quality concrete material. These poles are used extensively in electrical industry, for establishing electrical connections and fittings. Pre-stressing is generally a way to overcome concrete weakness in tension. Generally, the concrete undergoes compression on top flange and tension at bottom flange. The unique characteristics of pre-stressed concrete allow predetermined, engineering stresses to be placed in members to counteract stresses that occur when the unit is subjected to service loads. The demand for prestressed (Pre-cast/Reinforced) concrete-cement (PCC) poles directly depends on the growth of electric power sector, because these poles are solely meant for overhead transmission and distribution of power to consumer units. The Government of India is taking a number of steps and initiatives like 10-year tax exemption for solar energy projects, etc., in order to achieve India's ambitious renewable energy targets of adding 175 GW of renewable energy, including addition of 100 GW of solar power, by the year 2022. Thus, due to demand it is best to invest in this project. Few Indian major players are as under • Arvind Kumar Nand Kumar Ltd. • Ashoka Pre-Con Pvt. Ltd. • Concrete Udyog Ltd. • Genus Power Infrastructures Ltd. • Sainik Finance & Inds. Ltd. • Shri Krsna Urja Project Pvt. Ltd.
Plant capacity: Pre-Stressed Concrete Electric Poles: 200 Nos./DayPlant & machinery: 158 lakhs
Working capital: -T.C.I: Cost of Project: Rs 462 lakhs
Return: 27.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Ingot from Aluminium Scrap

Ingots are very large casting products, greater in size and shape than blooms, billets and slabs. Ingot generally has rectangular/square cross section, but it is not necessary that it should be uniform throughout its length. (Ingot may have variable cross section.). Aluminium Alloy Ingots Like LM-2, LM-4, LM-6 which are commonly used in Gravity and Sand Casting, Pressure Die Casting Alloys like LM-13, LM-14, LM-24, ADC-12, ALSI-132 etc. Aluminium consumption in India was dominated by the power (39%), automobiles 5 (23%) and construction (15%) sectors. Demand for aluminium is likely to rise 7-8% in 2015- 16 and 2016-17, as demand from key end-user sectors increase. The Aluminum Market was valued at $133,564 million in 2015, and is expected to reach $167,277 million by 2022, registering a CAGR of 3.3% from 2016 to 2022. As a whole you can invest in this project without risk and earn profit.
Plant capacity: Aluminium Alloy Ingots: 3600 MT/Annum Aluminium Scrap : 60 MT /AnnumPlant & machinery: Rs 94 lakhs
Working capital: -T.C.I: Cost of Project : Rs 357 lakhs
Return: 22.00%Break even: 80.00%
Add to Inquiry Add to Inquiry Basket

Cold Water Starch

Cold water starch is a modified starch used to stiffen textile and other related fabric. It is simply used in cold (room temperature) water or directly on the material to be treated. Cold water starch is used to stiffen clothes and fabrics. It is used in cold water at room temperature on the fabric to be treated. Cold water starch is easy to use; it does not require boiling water to prepare it, this has made it a darling to starch users and launderers. The demand for starches and derivatives looks very promising in India as all the major user segments of starches and derivatives are showing near double digit growth in their production. It is also one of the largest contributors to India’s exports with approximately 11 percent of total exports. The Indian textile industry, currently valued at around INR 7265 bn ($110 bn), is expected to reach $225 bn by 2021. Global Modified Starch Market was valued at $7,995 million in 2016, and is projected to reach at $10,700 million by 2023, growing at a CAGR of 4.2% from 2017 to 2023. As a whole entrepreneur can venture in this field will be successful.
Plant capacity: 48 MT/DayPlant & machinery: 165 lakhs
Working capital: -T.C.I: Cost of Project: Rs 505 lakhs
Return: 27.00%Break even: 70.00%
Add to Inquiry Add to Inquiry Basket

Pressure Die Casting

Pressure die casting is a quick, reliable and cost-effective manufacturing process for production of high volume, metal components that are net-shaped have tight tolerances. Basically, the pressure die casting process consists of injecting under high pressure a molten metal alloy into a steel mold (or tool). This gets solidified rapidly (from milliseconds to a few seconds) to form a net shaped component. It is then automatically extracted. Die casting process is preferred for nonferrous metal parts of intricate shapes. Examples of products are automobiles appliances, hand tools, computer peripherals, toys, optical and photographic equipment etc. Advantages of Pressure Die Casting: • Lower costs compared to other processes. • Economical - typically production of any number of components from thousands to millions before requiring replacement is possible. • Castings with close dimensional control and good surface finish • Castings with thin walls, and therefore are lighter in weight Depending upon the pressure used, there are two types of pressure die casting namely High Pressure Die Casting and Low Pressure Die Casting. While high pressure die casting has wider application encompassing nearly 50% of all light alloy casting production. Currently low pressure die casting accounts for about 20% of the total production but its use is increasing. High pressure castings are must for castings requiring tight tolerance and detailed geometry. As the extra pressure is able to push the metal into more detailed features in the mold. Low pressure die casting is commonly used for larger and non-critical parts.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 41 of 68 | Total 675 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 41 67 68   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search


Search Project Reports & Profiles





Subjects