Google Search

Search

Already a Member ?

Best Business Opportunities in West Bengal- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mineral: Project Opportunities in West Bengal

PROFILE:

A mineral is a naturally occurring solid chemical substance formed through biogeochemical processes, having characteristic chemical composition, highly ordered atomic structure, and specific physical properties. India is one of the world's most naturally endowed lands. India is home to numerous minerals which benefit the country economically. The minerals produced in India constitute one-quarter of the world's most popular mineral resources.

RESOURCES:

West Bengal stands third in the country in terms of mineral production. The state contributes about one-fifth to the total production of minerals in the country. Coal constitutes 99% of the minerals extracted in West Bengal; fireclay, china clay, limestone, copper, iron, wolfram, manganese and dolomite are mined in small quantities. There are good possibilities of obtaining mineral oil and natural gas in the areas near the Bay of Bengal.

West Bengal is the third largest state for coal production, accounting for about half of India's total. Lignite mined in Darjeeling is used to make briquettes. West Bengal ranks next to Bihar and Madhya Pradesh in production of fireclay. China clay used in the pottery, paper, textile, rubber and paint industries are unearthed at Mohammad Bazar in Birbhum and Mejia in Bankura. Limestone which is used in cement industry is mined in Bankura, Purulia, Darjeeling and Jalpaiguri. There are copper mines in Jalpaiguri and Darjeeling. Small quantities of low quality iron-ore are mined in Bardhaman, Purulia, Birbhum and Darjeeling. There are manganese in the Jhargram region of Paschim Medinipur, Purulia and Bardhaman. The state’s production of dolomite comes from the Dooars region of Jalpaiguri.

GOVERNMENT POLICIES:

Keeping pace with the liberalised Mineral Policy being adopted by the Government of India, Government of West Bengal has formulated its Mineral Policy in 2002. Among the basic objectives of the West Bengal Mineral Policy, 2002 following are worth mentioning:

1. To review the existing State monopolies over mineral exploration and wherever required, go in for selective de-reservation.

2. To invite private capital, resources and technology, both foreign and domestic, for better exploration and exploitation;

3. To promote necessary linkages for smooth and uninterrupted development of mineral based industries to meet the needs of the State.

4. To ensure proper vigilance and supervision of mining activities with particular emphasis on simplification of procedures and greater generation of revenues from mineral resources.

5. To develop industry friendly facilities in specific minerals like, Coal, Granite and China Clay and in Natural gas like Coal bed Methane.

 

Iron and Steel: Project Opportunities in West Bengal

PROFILE:

India has one of the richest reserves of all the raw materials required for the industry, namely land, capital, cheap labour, iron ore, power, coal etc. Yet India is 5th in the world ranking for production of steel. Iron and steel is basis for laying the vibrant Indian industry. Production of steel has come to exist as an index of a country's potential, industrial and economic growth. The making of iron and steel had been known to the people of India since long. The iron pillar of Delhi is a proof of it and speaks of the quality of steel produced in this country in ancient times. The steel industry is often considered to be an indicator of economic progress, because of the critical role played by steel in infrastructural and overall economic development. The per capita usage of steel gives an indication of the technological advancement of a nation.

RESOURCES:

The growth of steel industry in the State is largely related to the proximity of raw materials, skilled manpower, port facilities and the vast market for steel products. Given these location advantages, large numbers of mini integrated steel plants have already been set up in the state manufacturing a wide range of products such as sponge irons, mild steels, iron pipes etc. The neighbouring Eastern States of India viz. Jharkhand, Orissa and Chattisgarh are endowed with huge iron ore reserves along with cooking coal and non-cooking coal. The establishment of Bengal Iron Works at Kulti in Burdwan district of West Bengal in 1870 where the first commercial blast furnace was set up in 1875 heralded the commencement of this industry in the State.

The easy availability of power, competitive rates of freight, close proximity to areas with natural resources relevant to the industry, and labour force traditionality skilled in operating iron and steel units are factors that have influenced the surge in investment in this sector.

GOVERNMENT POLICIES:

Under the new industrial policy, iron and steel has been made one of the high priority industries. Price and distribution controls have been removed  as well as foreign direct investment up to 100% (under automatic route) has been permitted.  The Trade Policy has also been liberalized and import and export of iron and steel is freely allowed with no quantitative restrictions on import of iron and steel items. Tariffs on various items of iron and steel have drastically come down since 1991-92 levels and the government is committed to bring them down to the international levels.  With the abolishing of price regulation of iron and steel in 92, the steel prices are market determined. The policy devises a multi-pronged strategy to achieve these targets with following focus areas; removal of supply constraints especially availability  of critical inputs like iron ore; improve cost competitiveness by expanding and strengthening the infrastructure in roads, railways, ports and power; increase exports; meet the additional capital requirements by mobilizing financial resources; promote investments by removing  procedural delays. In addition the policy also addresses challenges arising out of environmental concerns, human resource requirements, R&D, volatile steel prices and the secondary sector. 

 

Leather: Project Opportunities in West Bengal

PROFILE:

Leather Industry occupies a place of prominence in the Indian economy in view of its massive potential for employment, growth and exports. There has been increasing emphasis on its planned development, aimed at optimum utilisation of available raw materials for maximising the returns, particularly from exports.  The Indian leather sector meets 10% of global finished leather requirement. The leather industry is spread in different segments, namely, tanning & finishing, footwear & footwear components, leather garments, leather goods including saddlery & harness, etc.

RESOURCES:

West Bengal has been functioning as a vast raw material resource base for the leather industry in the form of hides and skins. However, Indian leather export has undergone a transition from the export of raw hides and skins in the fifties to value added finished leather in the nineties. In the context, leather processing industries in West Bengal needed a strong structural support and proposal was mooted for setting up an eco-friendly complex near Calcutta with modern technical and training facilities. In this full scale integrated leather complex, facilities for leather-finishing, computer-aided design centres, modern training centre for up gradation are also being provided. This mega complex will also have manufacturing units to produce footwear uppers, finished foot wears, leather goods and garments to catering to the expanding domestic and export markets. The availability of a wide range of cost effective leather chemicals with consistent quality is crucial for the success of such a mega complex. Entrepreneurs can set up manufacturing units in the mega complex for both tanning chemicals and post-tanning chemical auxiliaries.

 

GOVERNMENT POLICIES:

Government policies in support of the industry are:

• The entire leather sector is now de-licensed and de-reserved, paving way for expansion on modern lines with state-of-the art machinery and equipment

• 100% Foreign Direct Investment and Joint Ventures permitted through the automatic route

• 100% repatriation of profit and dividends, if investments made in convertible foreign currency. Only declaration to this effect to the Reserve Bank is required.

• Promotion of industrial parks (one leather park in Andhra Pradesh, one leather goods park in West Bengal, one footwear park in Tamil Nadu and one footwear components park in Chennai).

• Funding support for modernizing manufacturing facilities 

• Funding support for establishing design studios

• Duty free import of raw materials (namely raw skins, hides, semifinished leather and finished leather) and of embellishments and components under specific scheme

• Concessional duty on import of specified machinery for use in leather sector

• Duty neutralization / remission scheme 

 

Petrochemicals: Project Opportunities in West Bengal

PROFILE:

The petrochemical industry in India has been one of the fastest growing industries in the country. Since the beginning, the Indian petrochemical industry has shown an enviable growth rate. This industry also contributes largely to the economy of the country and the growth and development of manufacturing industry as well. It provides the foundation for manufacturing industries like construction, packaging, pharmaceuticals, agriculture, textiles etc.    

RESOURCES:

The state of West Bengal accounts for almost 4% of India’s production of petroleum products and 13% of India’s polymer production. The production has almost doubled in the last decade. Crude throughput at Haldia refinery increased to 5,502 million tones and its capacity utilization increased to 91.7% during 2005-06.

The growth of the Petrochemical sector has been very impressive both in terms of units set up and investment volume. The main reason for the recent growth of this industry is due to upstream and downstream industry linkages by the oil refining and petrochemical units set up in the state. The industry is due to receive a further fillip with the announcement of US$ 1 billion gas pipeline project to bring natural gas in the state. Haldia Petrochemicals Ltd. is India’s second largest integrated petrochemical complex. Currently producing 1.5 million tons of polymers and chemicals and has grown significantly to its present turnover of US$ 1.4 billion.

GOVERNMENT POLICIES:

The major thrust areas of the policy are:

•        Encourage public sector companies & nationalized banks to enter the capital market to raise resources & offer new investment avenues.

•        Invite & encourage private sector investment in these industries in order to accelerate growth.

•        Set up Petroleum, Chemical & Petroleum Investment Regions (PCPIR) in the state to promote investment on a global scale.

•        Foreign Technology investments will be invited in the petrochemical industries.

•        Encourage Foreign Equity participation in the petrochemical industries.

 

Food Processing: Project Opportunities in West Bengal

PROFILE:

Indian food processing industry is widely recognized as a 'sunrise industry' having huge potential for uplifting agricultural economy, creation of large scale processed food manufacturing and food chain facilities, and the resultant generation of employment and export earnings. The food processing sector in India is geared to meet the international standards. Food Safety and Standards Authority of India has the mandate to develop standards and also to harmonise the same with International Standards consistent with food hygiene and food safety requirement and to the conditions of India's food industry.

RESOURCES:

West Bengal is one of the three front running states in India in food and agro processing sector. Fruits, vegetables and cereals grow in abundance in West Bengal. The state accounts for 30% of potatoes, 27% of pineapples, 12% of bananas and 16% of India’s rice production. Additionally fruits like mangoes, papaya, guava and jackfruit and vegetables like tomatoes, cauliflowers, cabbage, brinjal, pumpkin, are available in plenty.

West Bengal is the largest producer of rice, pineapple, vegetables and fruits in the country and second largest producer of potatoes and lychees. It ranks 1st in total meat production (including poultry) in the country and accounts for 10% of the country’s edible oil production. It is a substantial producer of spices, coconut, cashew nut, arecanut, betel vine and oilseeds. West Bengal is also one of the leading states in pisciculture since it the largest producer of fish.

GOVERNMENT POLICIES:

Agro & Food Processing Industries form a very important part of the State’s economy. The West Bengal Government is setting up a number of policies & plans to focus on the selected areas like vegetables, fruits, fisheries, rice, poultry, dairy & floriculture. The major thrust areas of the policy are:

•        Increase agricultural production & productivity vertically through wider adoption of appropriate eco-system-specific & cost effective technology.

•        Bring more area under High Yielding Variety (HYV), hybrid & improved varieties of crops.

•        Emphasize increase production of pulses & oil seeds in non-traditional areas & non-conventional seasons.

•        Create employment opportunities in this sector to improve the socio-economic status of the farmers & also to remove sub-regional disparity.

•        Extending soil-testing facilities up to district level for proper use of fertilizer.

•        Post-harvest technology for reducing loss & better marketability.

•        Bring cultivable waste land & fallow land under cultivation.

•        Application of low cost technology for increasing production & productivity.

•        More money involvement in agriculture.

•        Encourage private entrepreneurship for processing of fruits, vegetables & horticultural items.

•        Promote floriculture parks & flower complexes in the state.

•        Other Business Process, knowledge Process and Engineering Process Outsourcing services

The State Government is encouraging the farmers for mechanization through the use of modern agricultural implements & machines for timely farm operation & reduction in the cost of cultivation.

 

Textiles: Project Opportunities in West Bengal

PROFILES:

The Indian textile industry is one of the largest industries in the world. The textile industry in India is the largest provider of employment after agriculture. This industry is one of the earliest industries of India to come into being; it is presently the second biggest industry in the world after China. Over the years, this industry has proved to be the provider of the basic requirements of the people. The industry holds a vital place in the Indian economy as it makes a contribution of 14 % to the industrial production of the country and at the same time sums up 4% of the total GDP of India. Along with contributing to the Indian economic scenario in terms of employment, involvement in the industrial production, foreign revenues the textile industry of India also contributes to the global textile economy. It contributes to the global textile fibre and yarn production.

RESOURCES:

The textile industry of Kolkata plays a significant role in the economy of the capital city of the state of West Bengal. West Bengal has traditionally been a major producer of cotton textile as well in the country. Jute textile manufacturing is the most prominent industry in West Bengal due to availability of raw jute in the state. At present there are 59 Jute mills in West Bengal. Main jute products are Hessian, sacking, jute bags, and other items produced by jute. Most of the jute mills are located on the banks of river Hooghly near Kolkata. West Bengal is the leader and pioneer in the country for the manufacturing of Jute textiles. Hosiery industry in West Bengal has a huge grow potential as Bengal was the birthplace of hosiery industry in India.

GOVERNMENT POLICIES:

The Ministry of Textiles in India has formulated numerous policies and schemes for the development of the textile industry in India. The government of India has been following a policy of promoting and encouraging the handloom sector through a number of programmes. Most of the schematic interventions of the government of India in the ninth and tenth plan period have been through the state agencies and co-operative societies in the handloom industries. Some of the major acts relating to textile industry include: Central Silk Board Act, 1948, The Textiles Committee Act, 1963, The Handlooms Act, 1985, Cotton Control Order, 1986, The Textile Undertakings Act, 1995 Government of India is earnestly trying to provide all the relevant facilities for the textile industry to utilize its full potential and achieve the target. The textile industry is presently experiencing an average annual growth rate of 9-10% and is expected to grow at a rate of 16% in value, which will eventually reach the target of US $ 115 billion by 2012. The clothing and apparel sector are expected to grow at a rate of 21 %t in value terms.

 

Biotechnology: Project Opportunities in West Bengal

PROFILE

The Indian biotechnology sector is one of the fastest growing knowledge-based sectors in India and is expected to play a key role in shaping India's rapidly developing economy. With numerous comparative advantages in terms of research and development (R&D) facilities, knowledge, skills, and cost effectiveness, the biotechnology industry in India has immense potential to emerge as a global key player. Biopharma and bioservices sectors contributed 63 per cent and 33 per cent, respectively, to the total biotech exports. The bioagriculture, bioindustrials and bioinformatics sectors remained focussed on domestic operations, bringing in nearly 90 per cent of their revenues from India.

RESOURCES

West Bengal has a vast knowledge base with few of the premiers institutes of India located here.          Presence of Kharagpur IIT which over the years have done path breaking research in this sector is a major resource of biotechnology development. It has rich bio diversity, characterized by several species of medicinal & aromatic plants and diverse agro climatic zones. A matrix of 75 deliverable products is ready for commercialization in the agro and medical sector. Increase awareness among people about the adverse side effects of synthetic drags.

GOVERNMENT POLICIES:

The state has been putting efforts to facilitate the growth of biotech industries and development of clean biotech technologies. The various key initiatives under this section include:

•        Conserve bio-diversity through mapping and sustainable use of bio-resources.

•        Create a "Centre of Excellence for Biotechnology" as a high quality support service to Biotech Industries.

•        Facilitate the flow of venture capital funds and bank credit to Biotech companies.

•        Spread general awareness for optimum utilisation of Biotechnology in the agriculture sector.

 

Automobile and auto components: Project Opportunities in West Bengal

PROFILE:

The Indian auto industry has the potential to emerge as one of the largest in the world. Presently, India is second largest two wheeler markets in the world, fourth largest commercial vehicle market in the world. 11th largest passenger car in the world and is expected to be the seventh largest market by 2016. The growth is a reflection of the emergence of India as a global automobile hub with almost all global auto makers having set up plants in India to cater mainly to the domestic market, as also the export market. The Indian auto component industry has kept pace with technological developments and is today catering not only to OEM and Tier I auto makers in India but abroad as well. Many Indian auto part makers have today also succeeded in emerging as the supplier of choice to global auto majors.

RESOURCES:

West Bengal has traditionally been very strong in the engineering industries and has been an important manufacturing base in the past. West Bengal’s Hindustan Motors was one of the pioneers by commencing production of vehicles in the state in the year 1948. Recently it has collaborated with Mitsubishi Company of Japan to diverse into a wide range of cars and manufactures everything related to automobile industry like trekkers, trucks, and also luxury cars like Mitsubishi Lancer and touching a consolidated net sale of US$ 233.47 million in the last fiscal year. West Bengal realizing this huge potential in this sector has geared up with appropriate plans and policies to boost this sector. Also it has got certain inherent competitive advantages since the state is located in the heart of India’s steel and manufacturing cluster.

 

GOVERNMENT POLICIES:

A number of policy initiatives have been taken by the government to facilitate the automotive industry. These include:

•        Permitting 100% FDI in this sector & removal of minimum capital investment norm for fresh entrants.

•        Establishing an international hub for manufacturing small, affordable passenger cars & a centre for manufacturing two-wheelers.

•        Conducting incessant modernization of the industry & facilitate indigenous design, research & development.

•        Leveraging State’s software technology into automotive technology wherever relevant.

•        Encouraging development of vehicles propelled by alternate energy sources.

•        Development of domestic safety & environmental standards at par with the international standards.

•        Emphasis on low emission fuel auto technologies & availability of appropriate auto fuels.

The State is also encouraging dynamic investment in the sector to create an environment for volume production & indigenous capability for small cars & auto parts.

 

Tea: Project Opportunities in West Bengal

PROFILE:

Tea is indigenous to India and is an area where the country can take a lot of pride. This is mainly because of its pre-eminence as a foreign exchange earner and its contributions to the country's GNP. In all aspects of tea production, consumption and export, India has emerged to be the world leader, mainly because it accounts for 31% of global production. It is perhaps the only industry where India has retained its leadership over the last 150 years. Tea production in India has a very interesting history to it. The range of tea offered by India - from the original Orthodox to CTC and Green Tea, from the aroma and flavour of Darjeeling Tea to the strong Assam and Nilgiri Tea- remains unparalleled in the world.

RESOURCES:

West Bengal is the second largest tea growing state in the countryl contributing almost 21% of the total production in the country. There are three tea-growing zones in the state;       Darjeeling,          Terai and Dooars. Darjeeling tea is considered to be the finest in the world. There are 343 tea gardens in West Bengal covering 1,03,950 hectares planted area. Some of the major players in the Tea industry in West Bengal include Tata Tea Ltd, James Finlay & Company. Both of them together are representing world’s second largest global branded tea operations with product and brand presence in over 50 countries. Goodricke Group Ltd. (GGL) a part of the UK-based Cammelia Plc, the world’s single largest tea producer in the private sector. In India it is the third largest tea producer and the leading producer of Darjeeling tea.

GOVERNMENT POLICIES:

The tea industry in India is highly regulated. It requires licenses for its import or export. While The Tea Act, 1953 controls production and distribution activities, the Tea (Marketing) Control Order, 2003 regulates tea sales and stipulates that a defined percentage of tea produced from each garden be sold through the auction system. In addition to this central cess, States also levy sales tax on sale of tea. Profits from production and sale of tea are subject to agricultural income tax by the states. Thus, the residual income after paying corporate tax is taxed again. This tax is levied on profits accruing to gardens located in respective state. 100% foreign direct investment (FDI) in tea industry is permitted subject to compulsory divestment of 26% equity of the company in favour of an Indian partner / Indian public within five years from the date of investment.

 

Tourism: Project Opportunities in West Bengal

PROFILE:

Tourism has become an important industry in many countries of the world, both in the east and the west. Various initiatives are being taken by the Government and other organizations to promote tourism here. Tourism in India is the largest service industry, with a contribution of 6.23% to the national GDP and 8.78% of the total employment in India. India's rich history and its cultural and geographical diversity make its international tourism appeal large and diverse. It presents heritage and cultural tourism along with medical, business and sports tourism. India has one of the largest and fastest growing medical tourism sectors.

RESOURCES:

West Bengal has the widest variety of attractions in terms of tourist spots from the bustling Kolkata Megapolis with its historical and modern charms, to the zones of tranquillity like the Himalayan terrain in the north to the Sunderbans in the south. The state is endowed with all the diversities of nature that is a tourist’s dream. From the arid Chhota Nagpur plateau region in the west, forests in the north and south, mountains in the north, sea beaches in the south and rivers crisscrossing the whole of the state the varied panorama offers the discerning traveller a very wide choice and caters to the requirements of varied travel segments. More specifically, the snow capped peaks of the Himalayas, Darjeeling, referred by many as the Queen of the Hill Stations, the Darjeeling Himalayan Railway declared as a World Heritage Site, the vast tea estates of the Dooars, the famed Royal Bengal Tiger of Sunderbans, the innumerable historical landmarks of India’s and Bengal’s glorious history are all wonders for the prospective tourists.

GOVERNMENT POLICIES:

In order to develop tourism in India in a systematic manner, position it as a major engine of economic growth and to harness its direct and multiplier effects for employment and poverty eradication in an environmentally sustainable manner, the National Tourism Policy was formulated in the year 2002. Broadly, the “Policy” attempts to:-

•        Position tourism as a major engine of economic growth;

•        Harness the direct and multiplier effects of tourism for employment generation, economic development and providing impetus to rural tourism;

•        Focus on domestic tourism as a major driver of tourism growth.

•        Position India as a global brand to take advantage of the burgeoning global travel trade and the vast untapped potential of India as a destination;

•        Acknowledges the critical role of private sector with government working as a pro-active facilitator and catalyst;

•        Create and develop integrated tourism circuits based on India’s unique civilization, heritage, and culture in partnership with States, private sector and other agencies; and

•        Ensure that the tourist to India gets physically invigorated, mentally rejuvenated, culturally enriched, spiritually elevated and “feel India from within”.

 

Waste Management: Project Opportunities in West Bengal

PROFILE:

Waste management is the collection, transport, processing or disposal, managing and monitoring of waste materials. The term usually relates to materials produced by human activity, and the process is generally undertaken to reduce their effect on health, the environment or aesthetics. Waste management is a distinct practice from resource recovery which focuses on delaying the rate of consumption of natural resources. The management of wastes treats all materials as a single class, whether solid, liquid, gaseous or radioactive substances, and tried to reduce the harmful environmental impacts of each through different methods.

RESOURCES:

There are 609 hazardous waste generating units in West Bengal. Amongst the nineteen districts of the state, two districts (Darjeeling and South Dinajpur) do not generate hazardous waste. The total quantum of hazardous waste generation from West Bengal is 2,59,776.24 metric tonnes per annum. (MTPA), out of which 46 per cent (1,20,596.41 MTPA) is landfillable, 49 per cent (1,26,596.38 MTPA) is recyclable and the remaining 5 per cent (12,583.45 MTPA) is incinerable by nature. Interestingly, it was observed that the majority of hazardous waste generating units in the state is small and is generating meagre quantity of waste, whereas the units generating substantial amount of hazardous wastes are limited in number.

 

GOVERNMENT POLICIES:

The Central Government notified the Municipal Solid Wastes (Management & Handling) Rules 2000 under Sections 3, 6 and 25 of the Environment (Protection) Act 1986 for the purpose of managing municipal and urban wastes/garbage in an environmentally sound manner. Government of West Bengal are the nodal agencies for technical guidance and preparation of project report for the development of municipal solid waste management plan for the municipal authorities situated within Kolkata Metropolitan Area (KMA) and Non-KMA areas respectively. National policy on waste management is set out in the October 1998 policy statement on waste management- Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 244 of 247 | Total 2470 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 244 246 247   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Set up a Sustainable Industrial Park. -“self-contained island providing high-quality infrastructural facilities. Integrated industrial parks offer industrial, residential, and commercial areas with developed plots/ pre-built factories, power, telecom, wat

The SIDC or another government body / statutory authority is usually in charge of promoting industrial parks. A government agency plans, approves, develops, manages, and regulates the projects, with just a small amount of private sector involvement. Industrial parks can be promoted through a variety of schemes, including Growth Centres, Export Processing Zones, Free Trade Zones, Export Promotion Industrial Parks, Software Technology Parks, and Electronics Hardware Technology Parks. Industrial parks can be designed to include additional services and features that benefit the businesses who rent space there. Commodities and completed products can be transported to large industrial hubs for distribution through ports. The cargo is transferred to trucks and railroad waggons using cranes and other heavy lifting equipment available at the industrial park. Within the industrial park, freight can also be housed in warehouses. Manufacturers with access to a port can easily obtain the resources they need to make their products if they are located in an industrial park with port access. • Industrial parks are very adaptable. One of the primary advantages of industrial parks over other types of real estate development is that many, if not all, of them are flexible or easy to reconfigure. • Industrial parks can have production, transportation, and storage facilities all in one location. Chemical facilities, plastics makers, food and beverage processors, and steel producers are all examples of this. • Industrial parks aren't just for the benefit of the local economy. The country benefits from this type of real estate endeavor in two ways. If the complex houses local industries that can be developed, the first option is the best. • Every continent has a unique niche and competitive advantage to offer international and foreign investors. Central America, for example, is one of the fastest-growing regions in the world, with developing infrastructure and abundant natural resources. Something not insignificant. • One industry benefits from the proximity of another. A finished product from one industry can be used as a raw material in another. Because both industries will be housed in the same complex, transportation and implementation expenses would be saved. • The industrial leaders are also relieved by the proximity. The initial outlay is minimal, and all necessary infrastructure and support services are easily available. As a result, entrepreneurs may devote their entire attention to the firm and its growth. • More jobs will be created. Industrial parks boost labour mobility and generate more work opportunities. Because many of the units require a lot of labour, there are chances for both skilled and unskilled workers. Estimating demand for an industrial park is difficult because the existence of an industrial park (IP) is a catalyst for industrial investment in the surrounding area. Another difficulty is to divide the total planned industrial investment into units that will most likely be situated inside IPs and those that will most likely be located outside IPs. Small to medium units have historically been more likely to be found in IPs. Government policies also have an impact on demand for industrial parks. An IP-friendly approach should encourage greater investments to be made in industrial parks rather than isolated businesses. The demand for industrial parks can be thought of as derived, with anticipated industrial investment serving as the driving force. As previously stated, the need for industrial parks is determined by the amount of industrial investment anticipated in the state. Demand was calculated using estimates about industrial growth, project investment to land area norms, project phasing, and the chance of stated or proposed projects being completed. Key Players: • Ansal Landmark Townships Pvt. Ltd. • Cessna Garden Developers Pvt. Ltd. • D L F Garden City Indore Pvt. Ltd. • Entertainment City Ltd. • Godrej Garden City Properties Pvt. Ltd. • Himachal Textile Park Ltd. • Industrial Township (Maharashtra) Ltd. • Infinite Infopark Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Emerging Business Opportunities in Production of Milk Powder (Baby Milk for 0 to 5 year, Milk Powder for Coffee and Tea).

Powdered milk is made by eliminating the water from milk and evaporating it to dryness. Spray drying is the most common method of producing powdered milk, which is a manufactured dairy product. After raw milk has been pasteurized, it is sprayed dry. It's then cooked, evaporated, then heated again to get a concentrated milk solids combination. After that, the mixture is sprayed into a heated chamber, where it is reduced to fine particles. Milk's capacity to revert to its former state when rehydrated with water is due to this atomized process. Milk is frequently dried again after the spray drying process to ensure that any remaining moisture is eliminated before packaging. It is then shipped to a variety of destinations, including grocery stores, emergency food warehouses, and countries with limited access to fresh milk. Powdered milk is commonly used in the production of newborn formula, confectionary like chocolate and caramel candy, and baked goods recipes where liquid milk would make the result too thin. Powdered milk is also used in a variety of sweets, including the famous Indian milk balls known as gulab jamun and the iconic Indian sweet treat known as chum chum (sprinkled with desiccated coconut) (made with skim milk powder). Powdered milk is used in many no-cook nut butter recipes to keep the nut butter from turning liquid by absorbing the oil. • Milk powder contains nearly the same amount of proteins (26%) and carbs (37%) as liquid milk, however the water content is reduced to just 3%. However, depending on the commercially accessible brand, the fat percentage ranges from 25 to 28 percent. • Casein, a milk protein, is supposed to activate the entire body and aid muscle protein production. • Vitamins A and D are also added to milk powder. Vitamin A aids in the creation of bones, whereas Vitamin D aids in the improvement of vision. Both vitamins are essential for the preservation and repair of skin. • It contains calcium, which aids in the growth and preservation of teeth and bones throughout life. Breastfeeding is sometimes medically contraindicated. These are some of them: • Health of the mother: The mother is HIV-positive or suffers from active TB. She is very sick or has undergone some types of breast surgery that may have removed or severed all of the breast's milk-producing components. She is using any medicine that could harm the baby, including both prescription and illicit drugs like cytotoxic chemotherapy for cancer treatment. • Breastfeeding is not possible for the baby: Breastfeeding is difficult or impossible for the infant due to a birth abnormality or inborn metabolic error such as galactosemia. • Baby is at risk of malnutrition: Infants may be at risk of malnutrition in certain circumstances, such as iron deficiency, vitamin deficiencies (e.g., vitamin D, which may be less present in breast milk than needed at high latitudes with less sun exposure), or inadequate nutrition during the transition to solid foods. Improved diet and knowledge of moms and caregivers, as well as the availability of macro and micronutrients, can often decrease risks. • Food allergies: The mother consumes foods that may cause the infant to have an allergic reaction. • Financial constraints: Maternity leave is either underpaid, insufficient, or not available. Breastfeeding is hampered by the mother's job. Breastfeeding mothers may see a decrease in their earning ability. From 2018 to 2025, the global milk powder market is expected to increase at a CAGR of 4.4 percent, from $27,783.3 million in 2017 to $38,086.1 million in 2025. Milk powder is a dry dairy product made by evaporating milk to dehydrate it. Making milk powder has the goal of extending the shelf life of milk without the need of a refrigerator. Whole milk powder, skimmed milk powder, dairy whitener, and various varieties of milk powder are available. It is commonly consumed around the world due to its nutritional benefits, and it has been used in infant formulae, confectionaries, baked pastries, and savoury dishes. The global milk powder market is driven by factors such as an increase in the usage of milk powder in infant foods and the availability of many nutrients such as vitamin C, vitamin B12, thiamin, and high levels of protein. Furthermore, the milk powder business is growing due to lower storage and transportation costs. The inclusion of preservatives, adulteration, and tight infant food rules, on the other hand, limit the expansion of the milk powder business. The development of flavoured milk powder has opened up new commercial potential. Dehydrating milk by roller drying and spray drying produces milk powder. Milk powder is made from several types of milk, which defines the composition of the powder. Whole milk powder, skimmed milk powder, dairy whitener, buttermilk powder, fat-filled milk powder, and others make up the milk powder market, according to the research. Many consumers believe that whole milk is the most natural kind of milk, but it is less popular among individuals who are concerned about their weight or who are on a particular diet. Key Players: 1. D S P I Milk Foods Ltd. 2. Haryana Milk Foods Ltd. 3. Herman Milkfoods Ltd. 4. K K Milk Fresh India Ltd. 5. Kamdhenu Foods Ltd. 6. Kwality Ltd. 7. Markandeshwar Foods & Allied Products Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Emerging Business Opportunities in Production of Milk Powder (Baby Milk for 0 to 5 year, Milk Powder for Coffee and Tea).

Powdered milk is made by eliminating the water from milk and evaporating it to dryness. Spray drying is the most common method of producing powdered milk, which is a manufactured dairy product. After raw milk has been pasteurized, it is sprayed dry. It's then cooked, evaporated, then heated again to get a concentrated milk solids combination. After that, the mixture is sprayed into a heated chamber, where it is reduced to fine particles. Milk's capacity to revert to its former state when rehydrated with water is due to this atomized process. Milk is frequently dried again after the spray drying process to ensure that any remaining moisture is eliminated before packaging. It is then shipped to a variety of destinations, including grocery stores, emergency food warehouses, and countries with limited access to fresh milk. Powdered milk is commonly used in the production of newborn formula, confectionary like chocolate and caramel candy, and baked goods recipes where liquid milk would make the result too thin. Powdered milk is also used in a variety of sweets, including the famous Indian milk balls known as gulab jamun and the iconic Indian sweet treat known as chum chum (sprinkled with desiccated coconut) (made with skim milk powder). Powdered milk is used in many no-cook nut butter recipes to keep the nut butter from turning liquid by absorbing the oil. • Milk powder contains nearly the same amount of proteins (26%) and carbs (37%) as liquid milk, however the water content is reduced to just 3%. However, depending on the commercially accessible brand, the fat percentage ranges from 25 to 28 percent. • Casein, a milk protein, is supposed to activate the entire body and aid muscle protein production. • Vitamins A and D are also added to milk powder. Vitamin A aids in the creation of bones, whereas Vitamin D aids in the improvement of vision. Both vitamins are essential for the preservation and repair of skin. • It contains calcium, which aids in the growth and preservation of teeth and bones throughout life. Breastfeeding is sometimes medically contraindicated. These are some of them: • Health of the mother: The mother is HIV-positive or suffers from active TB. She is very sick or has undergone some types of breast surgery that may have removed or severed all of the breast's milk-producing components. She is using any medicine that could harm the baby, including both prescription and illicit drugs like cytotoxic chemotherapy for cancer treatment. • Breastfeeding is not possible for the baby: Breastfeeding is difficult or impossible for the infant due to a birth abnormality or inborn metabolic error such as galactosemia. • Baby is at risk of malnutrition: Infants may be at risk of malnutrition in certain circumstances, such as iron deficiency, vitamin deficiencies (e.g., vitamin D, which may be less present in breast milk than needed at high latitudes with less sun exposure), or inadequate nutrition during the transition to solid foods. Improved diet and knowledge of moms and caregivers, as well as the availability of macro and micronutrients, can often decrease risks. • Food allergies: The mother consumes foods that may cause the infant to have an allergic reaction. • Financial constraints: Maternity leave is either underpaid, insufficient, or not available. Breastfeeding is hampered by the mother's job. Breastfeeding mothers may see a decrease in their earning ability. From 2018 to 2025, the global milk powder market is expected to increase at a CAGR of 4.4 percent, from $27,783.3 million in 2017 to $38,086.1 million in 2025. Milk powder is a dry dairy product made by evaporating milk to dehydrate it. Making milk powder has the goal of extending the shelf life of milk without the need of a refrigerator. Whole milk powder, skimmed milk powder, dairy whitener, and various varieties of milk powder are available. It is commonly consumed around the world due to its nutritional benefits, and it has been used in infant formulae, confectionaries, baked pastries, and savoury dishes. The global milk powder market is driven by factors such as an increase in the usage of milk powder in infant foods and the availability of many nutrients such as vitamin C, vitamin B12, thiamin, and high levels of protein. Furthermore, the milk powder business is growing due to lower storage and transportation costs. The inclusion of preservatives, adulteration, and tight infant food rules, on the other hand, limit the expansion of the milk powder business. The development of flavoured milk powder has opened up new commercial potential. Dehydrating milk by roller drying and spray drying produces milk powder. Milk powder is made from several types of milk, which defines the composition of the powder. Whole milk powder, skimmed milk powder, dairy whitener, buttermilk powder, fat-filled milk powder, and others make up the milk powder market, according to the research. Many consumers believe that whole milk is the most natural kind of milk, but it is less popular among individuals who are concerned about their weight or who are on a particular diet. Key Players: 1. D S P I Milk Foods Ltd. 2. Haryana Milk Foods Ltd. 3. Herman Milkfoods Ltd. 4. K K Milk Fresh India Ltd. 5. Kamdhenu Foods Ltd. 6. Kwality Ltd. 7. Markandeshwar Foods & Allied Products Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Business Plan for Production of Unsaturated Polyester Resin.

The third largest class of thermoset moulding resins is unsaturated polyesters. They're made when a diol condenses with a mixture of saturated and unsaturated anhydrides. When cross-linked with reactive vinyl monomers like styrene, the condensation products (reactive resins) form extremely durable structures and coatings. The types of anhydrides and glycols utilised, as well as their relative amounts, determine the qualities of the cross-linked resin. The bulk of commercial unsaturated polyester resins (UPR) are made up of 1,2-propylene glycol as the diol and phthalic and maleic anhydride as the saturated and unsaturated components. Epoxy resins such as epichlorhydrin or bisphenol A diglycidyl ether can also be used to condense anhydrides and acids. The epoxy compounds' oxirane rings behave as difunctional glycols, which means they can replace all or portion of the polyols. Glycidyl methacrylates are sometimes used to cap carboxylated unsaturated polyesters. To tailor the characteristics of unsaturated polyesters, a variety of glycols, acids, and anhydrides can be utilised. Long-chain aliphatic acids, such as adipic or succinic acid, improve flexibility but diminish chemical and heat resistance, therefore isophthalic acid (IPA) and terephthalic acid (TA) are sometimes used to provide higher thermal and chemical resistance. Ethylene glycols, such as diethylene glycol and polypropylene glycol, can improve flexibility in a similar way. To tie off excess hydroxyl and carboxyl groups and lower the molecular weight of the final prepolymer, monofunctional acids and bases can be used. The following are some of the benefits of polyester resin: 1. Resistant to water and a wide range of chemicals. 2. Weather and age resistance is adequate. 3. It is inexpensive. 4. Polyesters can endure temperatures of up to 80 degrees Celsius. 5. Polyesters have good wetting properties when it comes to glass fibres. 6. Relatively low shrinkage during curing, ranging from 4–8%. 7. The range of linear thermal expansion is 100–200 x 106 K1. In 2019, the global unsaturated polyester resin market was worth USD 11.63 billion. In these end-use areas, recent advancements in the building and construction and tank and pipe industries are projected to fuel demand for isophthalic. The market for unsaturated polyester resin is expected to benefit from increased use of environmentally friendly and energy-saving products (UPR). Bio-based unsaturated polyester resins, which offer recyclability, excellent strength, and thermal and corrosion resistance with lower thickness, are expected to drive market growth. Demand is expected to be bolstered by technological breakthroughs, innovations, and studies aimed at broadening the product's application scope. In 2019, Asia Pacific dominated the UPR market with a revenue share of over 57.0 percent. The growth of major end-use industries such as construction, electronics, transportation, and marine is driving the market. In the near future, the market for UPR is expected to grow due to the automotive industry's strong manufacturing base in China, Japan, and India, as well as increased passenger vehicle sales. In addition, over the forecast period, rising demand for composites in solder pallets, speaker housings, and reinforced cell phones is expected to boost the market for UPR. However, the availability of alternative polymer resins for composites manufacturing, such as epoxy resin and nylon, is expected to limit demand for UPR in electrical applications. Key Players: • Ashland India Pvt. Ltd. • Ineos Styrolution India Ltd. • Kanoria Chemicals & Inds. Ltd. • Lanxess India Pvt. Ltd. • Reichhold India Pvt. Ltd. • Satyen Polymers Pvt. Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Business Plan for Production of Unsaturated Polyester Resin.

The third largest class of thermoset moulding resins is unsaturated polyesters. They're made when a diol condenses with a mixture of saturated and unsaturated anhydrides. When cross-linked with reactive vinyl monomers like styrene, the condensation products (reactive resins) form extremely durable structures and coatings. The types of anhydrides and glycols utilised, as well as their relative amounts, determine the qualities of the cross-linked resin. The bulk of commercial unsaturated polyester resins (UPR) are made up of 1,2-propylene glycol as the diol and phthalic and maleic anhydride as the saturated and unsaturated components. Epoxy resins such as epichlorhydrin or bisphenol A diglycidyl ether can also be used to condense anhydrides and acids. The epoxy compounds' oxirane rings behave as difunctional glycols, which means they can replace all or portion of the polyols. Glycidyl methacrylates are sometimes used to cap carboxylated unsaturated polyesters. To tailor the characteristics of unsaturated polyesters, a variety of glycols, acids, and anhydrides can be utilised. Long-chain aliphatic acids, such as adipic or succinic acid, improve flexibility but diminish chemical and heat resistance, therefore isophthalic acid (IPA) and terephthalic acid (TA) are sometimes used to provide higher thermal and chemical resistance. Ethylene glycols, such as diethylene glycol and polypropylene glycol, can improve flexibility in a similar way. To tie off excess hydroxyl and carboxyl groups and lower the molecular weight of the final prepolymer, monofunctional acids and bases can be used. The following are some of the benefits of polyester resin: 1. Resistant to water and a wide range of chemicals. 2. Weather and age resistance is adequate. 3. It is inexpensive. 4. Polyesters can endure temperatures of up to 80 degrees Celsius. 5. Polyesters have good wetting properties when it comes to glass fibres. 6. Relatively low shrinkage during curing, ranging from 4–8%. 7. The range of linear thermal expansion is 100–200 x 106 K1. In 2019, the global unsaturated polyester resin market was worth USD 11.63 billion. In these end-use areas, recent advancements in the building and construction and tank and pipe industries are projected to fuel demand for isophthalic. The market for unsaturated polyester resin is expected to benefit from increased use of environmentally friendly and energy-saving products (UPR). Bio-based unsaturated polyester resins, which offer recyclability, excellent strength, and thermal and corrosion resistance with lower thickness, are expected to drive market growth. Demand is expected to be bolstered by technological breakthroughs, innovations, and studies aimed at broadening the product's application scope. In 2019, Asia Pacific dominated the UPR market with a revenue share of over 57.0 percent. The growth of major end-use industries such as construction, electronics, transportation, and marine is driving the market. In the near future, the market for UPR is expected to grow due to the automotive industry's strong manufacturing base in China, Japan, and India, as well as increased passenger vehicle sales. In addition, over the forecast period, rising demand for composites in solder pallets, speaker housings, and reinforced cell phones is expected to boost the market for UPR. However, the availability of alternative polymer resins for composites manufacturing, such as epoxy resin and nylon, is expected to limit demand for UPR in electrical applications. Key Players: • Ashland India Pvt. Ltd. • Ineos Styrolution India Ltd. • Kanoria Chemicals & Inds. Ltd. • Lanxess India Pvt. Ltd. • Reichhold India Pvt. Ltd. • Satyen Polymers Pvt. Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start Production Business of Sanitary Napkins - How To Make It Happen. Most Demanding Profitable Business of Women Hygiene Products.

A sanitary napkin, sanitary towel, sanitary pad, menstrual pad, or pad is an absorbent item worn by women in their underwear when menstruating, bleeding after giving birth, recovering from gynecologic surgery, having a miscarriage or abortion, or in any other situation where a flow of blood from the vagina is required to be absorbed. A menstrual pad is a form of period hygiene product that is worn on the outside of the vaginal canal, as opposed to tampons and menstrual cups, which are worn within. Pads are often replaced by removing the pants and panties, removing the old pad, placing the new pad on the inside of the underwear, and drawing the panties back on. To avoid specific bacteria that might fester in blood, pads should be changed every 3–4 hours; however, this period may vary according on the type worn, the flow, and the time it is worn. Menstrual pads come in a variety of materials, which vary by style, place of origin, and brand. The pads are not in the same category as incontinence pads, which have a higher absorbency and are worn by those who suffer urine incontinence or stress incontinence. Different Types of Sanitary Napkins: Disposable Sanitary Napkins come in a variety of styles: 1. Panty liner: For everyday vaginal discharge, light menstrual flow, "spotting," slight urinary incontinence, or as a backup for tampon or menstrual cup use. 2. Ultra-thin: A very small (thin) pad that may be as absorbent as a Regular, Maxi/Super, or Super-thin pad but with less volume. 3. Regular: A pad with a medium level of absorbency. 4. Maxi/Super: A bigger absorbency pad that is especially useful at the beginning of the menstrual cycle, when menstruation is frequently the heaviest. 5. Overnight: A lengthier pad with an absorbency ideal for overnight usage to provide greater protection while the wearer is lying down. 6. Maternity: These are slightly longer than a maxi/Super pad and are designed to absorb lochia (bleeding after childbirth) as well as pee. Women use menstrual pads to absorb period flow and protect their clothing and belongings. They are usually individually wrapped to make carrying them in a handbag or bag easier and more unobtrusive. This wrapper can be used to wrap dirty pads before throwing them away in the proper containers. Some women prefer to use toilet paper to wrap the pads instead of (or in addition to) the wrapper, which is often composed of slick plastic with a little tape tab and may not adhere well. Menstrual pads of any kind should not be flushed since they can clog the toilet. Soiled pads are nearly always placed in a receptacle in public bathrooms in developed countries. If gauze is unavailable or insufficient, they make good first-aid dressings for excessive bleeding due to their high absorbency. Menstrual pads are used by many women who have urine incontinence to control bladder leaks. Menstrual pads, on the other hand, are meant to absorb menstrual flow and are not as successful at absorbing urinary leakage; incontinence pads are. If a woman is menstruation and does not have sanitary napkins on hand, she may use toilet paper as a temporary substitute. In the year 2020, the sanitary napkin industry will be worth almost USD 521.5 million. Between 2021 and 2026, the market is predicted to increase at an annual rate of 11%, reaching a value of around USD 975.4 million. Hygiene and health of women are key problems all around the world. A sanitary napkin is an absorbent material that a woman uses during her menstrual period. The materials used to make sanitary napkins are cellulose, polyethylene, and cotton. Manufacturers are expected to boost their CSR (corporate social responsibility) initiatives relating to women's hygiene and focus on unexplored rural markets. Wings napkins, aromatic napkins, quilted linings, panty liners, and pad thickness reduction are only a few of the key advances in the sanitary napkin business. Traditionally, sanitary napkins have been constructed of rayon and hydrophilic wood pulp. Fluids soak slowly through these materials. Manufacturers are currently adopting ultra-absorbent polymers and non-woven materials that absorb fluid faster than standard sanitary napkins. Furthermore, these materials reduce the sanitary napkin's thickness. During the forecast period, all of these factors are projected to boost the sanitary napkin market. Various factors such as changing sanitary napkin buying habits, an increase in the number of working women, more awareness about female hygiene, and rising health concerns are all contributing to the global market's rise. Governments are also encouraging enterprises to run hygiene campaigns and develop marketing strategies in order to modify women's opinions and build their self-confidence and self-esteem, propelling the global sanitary napkin industry.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start Bamboo Toothbrush (Eco-Friendly) Manufacturing Business | Profitable Business of Bamboo Products Industry Ideas.

Bamboo, on the other hand, is an entirely natural product. Bamboo is a fast-growing plant that can be harvested in 3–5 years after being planted. It requires extremely little water and no pesticides. It also thrives in a wide range of conditions. As a result, it certainly has a lesser carbon footprint than plastic in terms of production. Bamboo is a natural material that is totally biodegradable, taking about 6 months to decompose in compost. This means that you can compost the handle of a bamboo toothbrush. Bamboo toothbrushes are an environmentally beneficial alternative to plastic toothbrushes. • Natural flex is provided by the ergonomic handle. • Surface stains are polished away with nylon bristles. • Cleans along the gum line while massaging the gums. • Gentle on the enamel and gums with soft bristles. • BPA-free and environmentally friendly. The most well-known and widely used benefit is that a bamboo-based toothbrush eliminates unnecessary waste while providing the same high level of cleaning as a plastic brush. Composting, recycling, and reusing your toothbrush has never been easier, with both the packing and disposing of your toothbrush. Bamboo toothbrushes are an environmentally responsible option because bamboo is a natural plant that is totally biodegradable, making it a renewable and long- lasting resource. It lowers pollution in the environment and plastic garbage in our oceans. - It is made of bamboo, which is an environmentally beneficial material. - Bamboo's antibacterial qualities allow it to be grown without the use of hazardous chemicals. - It has a biodegradable handle that decomposes quickly. Key Players: • Colgate-Palmolive Company. • The Humble Co. • Ecolife Innovations LLC. • Brush with Bamboo. • The Bamboo Brush Society. • Bamboo Brush Co. • Mother's Vault. • Yangzhou E.S. Toothbrush Co., Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start Business of Feldspar Processing. Business Opportunities in Minerals Industry.

The majority of the things we use on a daily basis are produced of feldspar, the most abundant mineral group in the earth's crust. Feldspars are particularly useful in industrial processes because they contain both alkali and alumina. Feldspar alumino-silicates operate as a flux, lowering the verification temperature and providing alumina, which increases hardness, durability, and chemical corrosion resistance in ceramic wares, electrical porcelain, and all types of glass and fibre insulation. Feldspars are employed as functional fillers in the paint, plastic, rubber, and adhesive industries, as well as as fluxing agents in ceramics and glass manufacture. Feldspars form intrusive and extrusive igneous rocks from magma, and they're also found in a variety of metamorphic rocks. The rock is almost entirely made up of calcic plagioclase. Anorthosite is a kind of feldspar. Feldspars can be found in a wide variety of sedimentary rocks. In the glass and ceramics industries, feldspars are frequently employed. Plagioclase feldspars are less widely used in commercial applications than alkali feldspars. Albite, often known as soda spar, is a mineral used in ceramics. As both interior and external facing slabs, the feldspar-rich rocks larvikite and a few anorthosites are used. A number of feldspars are also utilised as jewels. Moonstone, for example, refers to variations with opalescence. Labradorite with powerful colour flashes is known as spectrolite. Sunstone (oligoclase or orthoclase) is often yellow to orange to brown in colour, with a golden sheen caused by reflections from red hematite inclusions. Amazonite, a green microcline variant, is used as a decorative material. Sanidine is found in extrusive felsic igneous rocks including rhyolite and trachyte as phenocrysts (huge visible crystals). It suggests that the rocks cooled swiftly following their eruption. Sanidine is also used as a marker for sanidinite hornfels or facies in high-temperature contact metamorphism. The global feldspar market was valued at USD 682.7 million in 2020, with a CAGR of 6.1 percent predicted during the forecast period. Rapidly rising demand for ceramic tiles in countries throughout the world, increasing use of feldspar in the glass sector, and increasing government investments in construction activities and infrastructure projects in established and developing nations are all driving market growth. Other significant drivers driving Market growth include the rapid increase in investments for the development, improvement, and renovation of residential and commercial infrastructure and buildings. Feldspars are a collection of rock-forming tecto silicate minerals that account for approximately 41% of the continental crust's weight. Feldspar works as a fluxing agent, lowering the melting temperature of quartz and regulating glass viscosity. Plagioclase Feldspar and K-Feldspar are two different types of feldspar. Different varieties of feldspar can be distinguished based on the presence of distinct inorganic minerals. The two key minerals that distinguish the varieties of feldspar are sodium and potassium. Plagioclase feldspar is a white mineral that is used as a filler in paints, coatings, plastics, and other products. The presence of numerous chemical compounds and minerals in feldspar, such as sodium oxide, potassium oxide, and alumina, help to promote its importance and use in the glass and ceramics industries. Other significant drivers driving the feldspar market's growth include increased demand for glass and ceramic materials, welding rod coatings, and extenders and fillers in the paint sector. Market Furthermore, rising development and construction activity in the residential sector, as well as rising demand for electronics items, are projected to boost market expansion to a large extent in the future. The global feldspar market was estimated at USD 1.61 billion in 2019, with a compound annual growth rate (CAGR) of 4.9 percent predicted from 2020 to 2027. The characteristics of the glass and ceramics sectors have a significant impact on market growth. The product's unique chemical ingredients, such as potassium oxide, sodium oxide, and alumina, play an important role in encouraging its use in the glass and ceramics industries. The product is primarily utilised in glassmaking and ceramics filler applications in its ground form ranging from 20 mesh to 200 mesh. Over the recent decade, China's demand for feldspar has increased significantly. The product's alumina component provides exceptional corrosion resistance, while alkalis give heat resistance. The substance is widely utilised in glassmaking due to its great characteristics. In 2019, Asia Pacific dominated the market, accounting for roughly 48.0 percent of worldwide revenue. The presence of a robust glassmaking and ceramics industry in the region is projected to influence feldspar market growth in Asia Pacific. Because of China's and India's thriving economies, the region has experienced consistent economic growth. Both countries are among the largest construction and automotive markets in the world. This will provide a steady platform for the glassmaking industry to mature, which would likely drive the growth of the feldspar market space in Asia Pacific.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Production Business of Blood Collection Tubes (Vacutainer)

A vacuum blood collection tube is a sterile glass or plastic test tube with a stopper that creates a vacuum inside the tube, allowing for the visualization of a predefined volume of liquid. The vacuum blood collection tube prevents needle stick injuries by preventing needles from coming into touch with humans and so being infected. In the vacuum blood collecting tube, a double-pointed needle is attached to a plastic tubular adaptor. Double-pointed needles are available in a wide range of gauge sizes. The needle's length ranges from one to one and a half inches. Vacuum blood collection tubes, which are used to preserve blood for treatment in a medical laboratory, may contain other materials. A vacuum blood collection tube is routinely used in clinics and laboratories to retain blood for future testing. A replacement for vacuum blood collection tubes that can preserve blood for testing purposes for an extended period of time has been created. Tubes for collecting blood under vacuum exist in a variety of diameters and specimen types. The vacuum created when a needle punctures the cap of a blood collection tube dissipates over time, and blood does not flow into the tube. With a CAGR of 7.1 percent from 2020 to 2025, the Blood Collection Tubes Market is expected to reach $2.81 billion by 2025. Many ailments necessitate the use of blood to diagnose and treat them. The blood processing process includes the collection, storage, and management of blood after it has been acquired from a donor. The blood collection tubes, also known as vacationers, are sterilised and include a safety-engineered stopper with several labelling options, including the volume and the colour of the caps, which indicate the additives in the tube. The rising usage of blood samples in diagnostics and the need for blood components in medical procedures are driving the need for blood collection tubes. Few Indian Major Players 1. Becton Dickinson India Pvt. Ltd. 2. Hindustan Syringes & Medical Devices Ltd. 3. Kriya Medical Technologies Pvt. Ltd. 4. Narang Medical Ltd. 5. Poly Medicure Ltd.
Plant capacity: Blood Collection Tubes (Vacutainer) 13x100 with EDTA: 100,000 Nos per day Blood Collection Tubes (Vacutainer) 13x75 Plain: 100,000 Nos per dayPlant & machinery: 345 Lakhs
Working capital: -T.C.I: Cost of Project: 983 Lakhs
Return: 30.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Lucrative Industry of Electric Motors

A machine that converts electricity into mechanical energy is known as an electric motor. Some motor manufacturers, particularly those producing sizes of 5 hp and higher, finish-machine the bearing journals and rotor diameter as a rotor assembly. The bearing journals and rotor diameter are properly matched with this technique. In most electric motors, the interaction between the magnetic field of the motor and the electric current in a wire winding generates force in the form of torque applied to the motor's shaft. Some of the applications for electric motors are listed below. • Electrical motor applications include blowers, fans, machine tools, pumps, turbines, power tools, alternators, compressors, rolling mills, ships, movers, and paper mills. • HVAC (heating, ventilation, and air conditioning), home appliances, and motor vehicles all employ electric motors. The Indian market for electric motors is highly fragmented due to the presence of a large number of participants, including large corporations and small and medium-sized firms. The India Electric Motors Market is estimated to grow at a CAGR of 5.9% over the next five years, from 2020 to 2026. Electric vehicles' growing popularity is boosting the global and Indian electric motor markets to new heights. Demand for automotive electric motors is expected to rise in the coming years as gasoline prices rise and strict rules aimed at reducing air pollution levels across the country are enacted. In addition, the FAME II programme for 100 percent vehicle electrification, the Make in India programme, and other initiatives targeted at assisting India in achieving its goal of becoming a global manufacturing hub will continue to fuel demand for electric motors in the country. Few Indian Major Players 1. A B G Motors Ltd. 2. Brook Crompton Greaves Ltd. 3. Hyoseong Electric India Pvt. Ltd. 4. Jem Industries Ltd. 5. Lakshmi Electrical Drives Ltd. 6. Manmir Engineering Inds. Ltd. 7. Marathon Electric India Pvt. Ltd.
Plant capacity: 5 KW Three Phase Induction Motors 120 Nos Per Day 10 KW Three Phase Induction Motors 120 Nos Per Day 10 KW Brushed DC Motors 120 Nos Per Day Automated Water Pump 5 KW Three Phase Induction Motors 120 Nos Per DayPlant & machinery: 467 Lakhs
Working capital: -T.C.I: Cost of Project: 3949 Lakhs
Return: 26.00%Break even: 41.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 244 of 247 | Total 2470 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 244 246 247   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top