Google Search

Search

Already a Member ?

Best Business Opportunities in West Bengal- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mineral: Project Opportunities in West Bengal

PROFILE:

A mineral is a naturally occurring solid chemical substance formed through biogeochemical processes, having characteristic chemical composition, highly ordered atomic structure, and specific physical properties. India is one of the world's most naturally endowed lands. India is home to numerous minerals which benefit the country economically. The minerals produced in India constitute one-quarter of the world's most popular mineral resources.

RESOURCES:

West Bengal stands third in the country in terms of mineral production. The state contributes about one-fifth to the total production of minerals in the country. Coal constitutes 99% of the minerals extracted in West Bengal; fireclay, china clay, limestone, copper, iron, wolfram, manganese and dolomite are mined in small quantities. There are good possibilities of obtaining mineral oil and natural gas in the areas near the Bay of Bengal.

West Bengal is the third largest state for coal production, accounting for about half of India's total. Lignite mined in Darjeeling is used to make briquettes. West Bengal ranks next to Bihar and Madhya Pradesh in production of fireclay. China clay used in the pottery, paper, textile, rubber and paint industries are unearthed at Mohammad Bazar in Birbhum and Mejia in Bankura. Limestone which is used in cement industry is mined in Bankura, Purulia, Darjeeling and Jalpaiguri. There are copper mines in Jalpaiguri and Darjeeling. Small quantities of low quality iron-ore are mined in Bardhaman, Purulia, Birbhum and Darjeeling. There are manganese in the Jhargram region of Paschim Medinipur, Purulia and Bardhaman. The state’s production of dolomite comes from the Dooars region of Jalpaiguri.

GOVERNMENT POLICIES:

Keeping pace with the liberalised Mineral Policy being adopted by the Government of India, Government of West Bengal has formulated its Mineral Policy in 2002. Among the basic objectives of the West Bengal Mineral Policy, 2002 following are worth mentioning:

1. To review the existing State monopolies over mineral exploration and wherever required, go in for selective de-reservation.

2. To invite private capital, resources and technology, both foreign and domestic, for better exploration and exploitation;

3. To promote necessary linkages for smooth and uninterrupted development of mineral based industries to meet the needs of the State.

4. To ensure proper vigilance and supervision of mining activities with particular emphasis on simplification of procedures and greater generation of revenues from mineral resources.

5. To develop industry friendly facilities in specific minerals like, Coal, Granite and China Clay and in Natural gas like Coal bed Methane.

 

Iron and Steel: Project Opportunities in West Bengal

PROFILE:

India has one of the richest reserves of all the raw materials required for the industry, namely land, capital, cheap labour, iron ore, power, coal etc. Yet India is 5th in the world ranking for production of steel. Iron and steel is basis for laying the vibrant Indian industry. Production of steel has come to exist as an index of a country's potential, industrial and economic growth. The making of iron and steel had been known to the people of India since long. The iron pillar of Delhi is a proof of it and speaks of the quality of steel produced in this country in ancient times. The steel industry is often considered to be an indicator of economic progress, because of the critical role played by steel in infrastructural and overall economic development. The per capita usage of steel gives an indication of the technological advancement of a nation.

RESOURCES:

The growth of steel industry in the State is largely related to the proximity of raw materials, skilled manpower, port facilities and the vast market for steel products. Given these location advantages, large numbers of mini integrated steel plants have already been set up in the state manufacturing a wide range of products such as sponge irons, mild steels, iron pipes etc. The neighbouring Eastern States of India viz. Jharkhand, Orissa and Chattisgarh are endowed with huge iron ore reserves along with cooking coal and non-cooking coal. The establishment of Bengal Iron Works at Kulti in Burdwan district of West Bengal in 1870 where the first commercial blast furnace was set up in 1875 heralded the commencement of this industry in the State.

The easy availability of power, competitive rates of freight, close proximity to areas with natural resources relevant to the industry, and labour force traditionality skilled in operating iron and steel units are factors that have influenced the surge in investment in this sector.

GOVERNMENT POLICIES:

Under the new industrial policy, iron and steel has been made one of the high priority industries. Price and distribution controls have been removed  as well as foreign direct investment up to 100% (under automatic route) has been permitted.  The Trade Policy has also been liberalized and import and export of iron and steel is freely allowed with no quantitative restrictions on import of iron and steel items. Tariffs on various items of iron and steel have drastically come down since 1991-92 levels and the government is committed to bring them down to the international levels.  With the abolishing of price regulation of iron and steel in 92, the steel prices are market determined. The policy devises a multi-pronged strategy to achieve these targets with following focus areas; removal of supply constraints especially availability  of critical inputs like iron ore; improve cost competitiveness by expanding and strengthening the infrastructure in roads, railways, ports and power; increase exports; meet the additional capital requirements by mobilizing financial resources; promote investments by removing  procedural delays. In addition the policy also addresses challenges arising out of environmental concerns, human resource requirements, R&D, volatile steel prices and the secondary sector. 

 

Leather: Project Opportunities in West Bengal

PROFILE:

Leather Industry occupies a place of prominence in the Indian economy in view of its massive potential for employment, growth and exports. There has been increasing emphasis on its planned development, aimed at optimum utilisation of available raw materials for maximising the returns, particularly from exports.  The Indian leather sector meets 10% of global finished leather requirement. The leather industry is spread in different segments, namely, tanning & finishing, footwear & footwear components, leather garments, leather goods including saddlery & harness, etc.

RESOURCES:

West Bengal has been functioning as a vast raw material resource base for the leather industry in the form of hides and skins. However, Indian leather export has undergone a transition from the export of raw hides and skins in the fifties to value added finished leather in the nineties. In the context, leather processing industries in West Bengal needed a strong structural support and proposal was mooted for setting up an eco-friendly complex near Calcutta with modern technical and training facilities. In this full scale integrated leather complex, facilities for leather-finishing, computer-aided design centres, modern training centre for up gradation are also being provided. This mega complex will also have manufacturing units to produce footwear uppers, finished foot wears, leather goods and garments to catering to the expanding domestic and export markets. The availability of a wide range of cost effective leather chemicals with consistent quality is crucial for the success of such a mega complex. Entrepreneurs can set up manufacturing units in the mega complex for both tanning chemicals and post-tanning chemical auxiliaries.

 

GOVERNMENT POLICIES:

Government policies in support of the industry are:

• The entire leather sector is now de-licensed and de-reserved, paving way for expansion on modern lines with state-of-the art machinery and equipment

• 100% Foreign Direct Investment and Joint Ventures permitted through the automatic route

• 100% repatriation of profit and dividends, if investments made in convertible foreign currency. Only declaration to this effect to the Reserve Bank is required.

• Promotion of industrial parks (one leather park in Andhra Pradesh, one leather goods park in West Bengal, one footwear park in Tamil Nadu and one footwear components park in Chennai).

• Funding support for modernizing manufacturing facilities 

• Funding support for establishing design studios

• Duty free import of raw materials (namely raw skins, hides, semifinished leather and finished leather) and of embellishments and components under specific scheme

• Concessional duty on import of specified machinery for use in leather sector

• Duty neutralization / remission scheme 

 

Petrochemicals: Project Opportunities in West Bengal

PROFILE:

The petrochemical industry in India has been one of the fastest growing industries in the country. Since the beginning, the Indian petrochemical industry has shown an enviable growth rate. This industry also contributes largely to the economy of the country and the growth and development of manufacturing industry as well. It provides the foundation for manufacturing industries like construction, packaging, pharmaceuticals, agriculture, textiles etc.    

RESOURCES:

The state of West Bengal accounts for almost 4% of India’s production of petroleum products and 13% of India’s polymer production. The production has almost doubled in the last decade. Crude throughput at Haldia refinery increased to 5,502 million tones and its capacity utilization increased to 91.7% during 2005-06.

The growth of the Petrochemical sector has been very impressive both in terms of units set up and investment volume. The main reason for the recent growth of this industry is due to upstream and downstream industry linkages by the oil refining and petrochemical units set up in the state. The industry is due to receive a further fillip with the announcement of US$ 1 billion gas pipeline project to bring natural gas in the state. Haldia Petrochemicals Ltd. is India’s second largest integrated petrochemical complex. Currently producing 1.5 million tons of polymers and chemicals and has grown significantly to its present turnover of US$ 1.4 billion.

GOVERNMENT POLICIES:

The major thrust areas of the policy are:

•        Encourage public sector companies & nationalized banks to enter the capital market to raise resources & offer new investment avenues.

•        Invite & encourage private sector investment in these industries in order to accelerate growth.

•        Set up Petroleum, Chemical & Petroleum Investment Regions (PCPIR) in the state to promote investment on a global scale.

•        Foreign Technology investments will be invited in the petrochemical industries.

•        Encourage Foreign Equity participation in the petrochemical industries.

 

Food Processing: Project Opportunities in West Bengal

PROFILE:

Indian food processing industry is widely recognized as a 'sunrise industry' having huge potential for uplifting agricultural economy, creation of large scale processed food manufacturing and food chain facilities, and the resultant generation of employment and export earnings. The food processing sector in India is geared to meet the international standards. Food Safety and Standards Authority of India has the mandate to develop standards and also to harmonise the same with International Standards consistent with food hygiene and food safety requirement and to the conditions of India's food industry.

RESOURCES:

West Bengal is one of the three front running states in India in food and agro processing sector. Fruits, vegetables and cereals grow in abundance in West Bengal. The state accounts for 30% of potatoes, 27% of pineapples, 12% of bananas and 16% of India’s rice production. Additionally fruits like mangoes, papaya, guava and jackfruit and vegetables like tomatoes, cauliflowers, cabbage, brinjal, pumpkin, are available in plenty.

West Bengal is the largest producer of rice, pineapple, vegetables and fruits in the country and second largest producer of potatoes and lychees. It ranks 1st in total meat production (including poultry) in the country and accounts for 10% of the country’s edible oil production. It is a substantial producer of spices, coconut, cashew nut, arecanut, betel vine and oilseeds. West Bengal is also one of the leading states in pisciculture since it the largest producer of fish.

GOVERNMENT POLICIES:

Agro & Food Processing Industries form a very important part of the State’s economy. The West Bengal Government is setting up a number of policies & plans to focus on the selected areas like vegetables, fruits, fisheries, rice, poultry, dairy & floriculture. The major thrust areas of the policy are:

•        Increase agricultural production & productivity vertically through wider adoption of appropriate eco-system-specific & cost effective technology.

•        Bring more area under High Yielding Variety (HYV), hybrid & improved varieties of crops.

•        Emphasize increase production of pulses & oil seeds in non-traditional areas & non-conventional seasons.

•        Create employment opportunities in this sector to improve the socio-economic status of the farmers & also to remove sub-regional disparity.

•        Extending soil-testing facilities up to district level for proper use of fertilizer.

•        Post-harvest technology for reducing loss & better marketability.

•        Bring cultivable waste land & fallow land under cultivation.

•        Application of low cost technology for increasing production & productivity.

•        More money involvement in agriculture.

•        Encourage private entrepreneurship for processing of fruits, vegetables & horticultural items.

•        Promote floriculture parks & flower complexes in the state.

•        Other Business Process, knowledge Process and Engineering Process Outsourcing services

The State Government is encouraging the farmers for mechanization through the use of modern agricultural implements & machines for timely farm operation & reduction in the cost of cultivation.

 

Textiles: Project Opportunities in West Bengal

PROFILES:

The Indian textile industry is one of the largest industries in the world. The textile industry in India is the largest provider of employment after agriculture. This industry is one of the earliest industries of India to come into being; it is presently the second biggest industry in the world after China. Over the years, this industry has proved to be the provider of the basic requirements of the people. The industry holds a vital place in the Indian economy as it makes a contribution of 14 % to the industrial production of the country and at the same time sums up 4% of the total GDP of India. Along with contributing to the Indian economic scenario in terms of employment, involvement in the industrial production, foreign revenues the textile industry of India also contributes to the global textile economy. It contributes to the global textile fibre and yarn production.

RESOURCES:

The textile industry of Kolkata plays a significant role in the economy of the capital city of the state of West Bengal. West Bengal has traditionally been a major producer of cotton textile as well in the country. Jute textile manufacturing is the most prominent industry in West Bengal due to availability of raw jute in the state. At present there are 59 Jute mills in West Bengal. Main jute products are Hessian, sacking, jute bags, and other items produced by jute. Most of the jute mills are located on the banks of river Hooghly near Kolkata. West Bengal is the leader and pioneer in the country for the manufacturing of Jute textiles. Hosiery industry in West Bengal has a huge grow potential as Bengal was the birthplace of hosiery industry in India.

GOVERNMENT POLICIES:

The Ministry of Textiles in India has formulated numerous policies and schemes for the development of the textile industry in India. The government of India has been following a policy of promoting and encouraging the handloom sector through a number of programmes. Most of the schematic interventions of the government of India in the ninth and tenth plan period have been through the state agencies and co-operative societies in the handloom industries. Some of the major acts relating to textile industry include: Central Silk Board Act, 1948, The Textiles Committee Act, 1963, The Handlooms Act, 1985, Cotton Control Order, 1986, The Textile Undertakings Act, 1995 Government of India is earnestly trying to provide all the relevant facilities for the textile industry to utilize its full potential and achieve the target. The textile industry is presently experiencing an average annual growth rate of 9-10% and is expected to grow at a rate of 16% in value, which will eventually reach the target of US $ 115 billion by 2012. The clothing and apparel sector are expected to grow at a rate of 21 %t in value terms.

 

Biotechnology: Project Opportunities in West Bengal

PROFILE

The Indian biotechnology sector is one of the fastest growing knowledge-based sectors in India and is expected to play a key role in shaping India's rapidly developing economy. With numerous comparative advantages in terms of research and development (R&D) facilities, knowledge, skills, and cost effectiveness, the biotechnology industry in India has immense potential to emerge as a global key player. Biopharma and bioservices sectors contributed 63 per cent and 33 per cent, respectively, to the total biotech exports. The bioagriculture, bioindustrials and bioinformatics sectors remained focussed on domestic operations, bringing in nearly 90 per cent of their revenues from India.

RESOURCES

West Bengal has a vast knowledge base with few of the premiers institutes of India located here.          Presence of Kharagpur IIT which over the years have done path breaking research in this sector is a major resource of biotechnology development. It has rich bio diversity, characterized by several species of medicinal & aromatic plants and diverse agro climatic zones. A matrix of 75 deliverable products is ready for commercialization in the agro and medical sector. Increase awareness among people about the adverse side effects of synthetic drags.

GOVERNMENT POLICIES:

The state has been putting efforts to facilitate the growth of biotech industries and development of clean biotech technologies. The various key initiatives under this section include:

•        Conserve bio-diversity through mapping and sustainable use of bio-resources.

•        Create a "Centre of Excellence for Biotechnology" as a high quality support service to Biotech Industries.

•        Facilitate the flow of venture capital funds and bank credit to Biotech companies.

•        Spread general awareness for optimum utilisation of Biotechnology in the agriculture sector.

 

Automobile and auto components: Project Opportunities in West Bengal

PROFILE:

The Indian auto industry has the potential to emerge as one of the largest in the world. Presently, India is second largest two wheeler markets in the world, fourth largest commercial vehicle market in the world. 11th largest passenger car in the world and is expected to be the seventh largest market by 2016. The growth is a reflection of the emergence of India as a global automobile hub with almost all global auto makers having set up plants in India to cater mainly to the domestic market, as also the export market. The Indian auto component industry has kept pace with technological developments and is today catering not only to OEM and Tier I auto makers in India but abroad as well. Many Indian auto part makers have today also succeeded in emerging as the supplier of choice to global auto majors.

RESOURCES:

West Bengal has traditionally been very strong in the engineering industries and has been an important manufacturing base in the past. West Bengal’s Hindustan Motors was one of the pioneers by commencing production of vehicles in the state in the year 1948. Recently it has collaborated with Mitsubishi Company of Japan to diverse into a wide range of cars and manufactures everything related to automobile industry like trekkers, trucks, and also luxury cars like Mitsubishi Lancer and touching a consolidated net sale of US$ 233.47 million in the last fiscal year. West Bengal realizing this huge potential in this sector has geared up with appropriate plans and policies to boost this sector. Also it has got certain inherent competitive advantages since the state is located in the heart of India’s steel and manufacturing cluster.

 

GOVERNMENT POLICIES:

A number of policy initiatives have been taken by the government to facilitate the automotive industry. These include:

•        Permitting 100% FDI in this sector & removal of minimum capital investment norm for fresh entrants.

•        Establishing an international hub for manufacturing small, affordable passenger cars & a centre for manufacturing two-wheelers.

•        Conducting incessant modernization of the industry & facilitate indigenous design, research & development.

•        Leveraging State’s software technology into automotive technology wherever relevant.

•        Encouraging development of vehicles propelled by alternate energy sources.

•        Development of domestic safety & environmental standards at par with the international standards.

•        Emphasis on low emission fuel auto technologies & availability of appropriate auto fuels.

The State is also encouraging dynamic investment in the sector to create an environment for volume production & indigenous capability for small cars & auto parts.

 

Tea: Project Opportunities in West Bengal

PROFILE:

Tea is indigenous to India and is an area where the country can take a lot of pride. This is mainly because of its pre-eminence as a foreign exchange earner and its contributions to the country's GNP. In all aspects of tea production, consumption and export, India has emerged to be the world leader, mainly because it accounts for 31% of global production. It is perhaps the only industry where India has retained its leadership over the last 150 years. Tea production in India has a very interesting history to it. The range of tea offered by India - from the original Orthodox to CTC and Green Tea, from the aroma and flavour of Darjeeling Tea to the strong Assam and Nilgiri Tea- remains unparalleled in the world.

RESOURCES:

West Bengal is the second largest tea growing state in the countryl contributing almost 21% of the total production in the country. There are three tea-growing zones in the state;       Darjeeling,          Terai and Dooars. Darjeeling tea is considered to be the finest in the world. There are 343 tea gardens in West Bengal covering 1,03,950 hectares planted area. Some of the major players in the Tea industry in West Bengal include Tata Tea Ltd, James Finlay & Company. Both of them together are representing world’s second largest global branded tea operations with product and brand presence in over 50 countries. Goodricke Group Ltd. (GGL) a part of the UK-based Cammelia Plc, the world’s single largest tea producer in the private sector. In India it is the third largest tea producer and the leading producer of Darjeeling tea.

GOVERNMENT POLICIES:

The tea industry in India is highly regulated. It requires licenses for its import or export. While The Tea Act, 1953 controls production and distribution activities, the Tea (Marketing) Control Order, 2003 regulates tea sales and stipulates that a defined percentage of tea produced from each garden be sold through the auction system. In addition to this central cess, States also levy sales tax on sale of tea. Profits from production and sale of tea are subject to agricultural income tax by the states. Thus, the residual income after paying corporate tax is taxed again. This tax is levied on profits accruing to gardens located in respective state. 100% foreign direct investment (FDI) in tea industry is permitted subject to compulsory divestment of 26% equity of the company in favour of an Indian partner / Indian public within five years from the date of investment.

 

Tourism: Project Opportunities in West Bengal

PROFILE:

Tourism has become an important industry in many countries of the world, both in the east and the west. Various initiatives are being taken by the Government and other organizations to promote tourism here. Tourism in India is the largest service industry, with a contribution of 6.23% to the national GDP and 8.78% of the total employment in India. India's rich history and its cultural and geographical diversity make its international tourism appeal large and diverse. It presents heritage and cultural tourism along with medical, business and sports tourism. India has one of the largest and fastest growing medical tourism sectors.

RESOURCES:

West Bengal has the widest variety of attractions in terms of tourist spots from the bustling Kolkata Megapolis with its historical and modern charms, to the zones of tranquillity like the Himalayan terrain in the north to the Sunderbans in the south. The state is endowed with all the diversities of nature that is a tourist’s dream. From the arid Chhota Nagpur plateau region in the west, forests in the north and south, mountains in the north, sea beaches in the south and rivers crisscrossing the whole of the state the varied panorama offers the discerning traveller a very wide choice and caters to the requirements of varied travel segments. More specifically, the snow capped peaks of the Himalayas, Darjeeling, referred by many as the Queen of the Hill Stations, the Darjeeling Himalayan Railway declared as a World Heritage Site, the vast tea estates of the Dooars, the famed Royal Bengal Tiger of Sunderbans, the innumerable historical landmarks of India’s and Bengal’s glorious history are all wonders for the prospective tourists.

GOVERNMENT POLICIES:

In order to develop tourism in India in a systematic manner, position it as a major engine of economic growth and to harness its direct and multiplier effects for employment and poverty eradication in an environmentally sustainable manner, the National Tourism Policy was formulated in the year 2002. Broadly, the “Policy” attempts to:-

•        Position tourism as a major engine of economic growth;

•        Harness the direct and multiplier effects of tourism for employment generation, economic development and providing impetus to rural tourism;

•        Focus on domestic tourism as a major driver of tourism growth.

•        Position India as a global brand to take advantage of the burgeoning global travel trade and the vast untapped potential of India as a destination;

•        Acknowledges the critical role of private sector with government working as a pro-active facilitator and catalyst;

•        Create and develop integrated tourism circuits based on India’s unique civilization, heritage, and culture in partnership with States, private sector and other agencies; and

•        Ensure that the tourist to India gets physically invigorated, mentally rejuvenated, culturally enriched, spiritually elevated and “feel India from within”.

 

Waste Management: Project Opportunities in West Bengal

PROFILE:

Waste management is the collection, transport, processing or disposal, managing and monitoring of waste materials. The term usually relates to materials produced by human activity, and the process is generally undertaken to reduce their effect on health, the environment or aesthetics. Waste management is a distinct practice from resource recovery which focuses on delaying the rate of consumption of natural resources. The management of wastes treats all materials as a single class, whether solid, liquid, gaseous or radioactive substances, and tried to reduce the harmful environmental impacts of each through different methods.

RESOURCES:

There are 609 hazardous waste generating units in West Bengal. Amongst the nineteen districts of the state, two districts (Darjeeling and South Dinajpur) do not generate hazardous waste. The total quantum of hazardous waste generation from West Bengal is 2,59,776.24 metric tonnes per annum. (MTPA), out of which 46 per cent (1,20,596.41 MTPA) is landfillable, 49 per cent (1,26,596.38 MTPA) is recyclable and the remaining 5 per cent (12,583.45 MTPA) is incinerable by nature. Interestingly, it was observed that the majority of hazardous waste generating units in the state is small and is generating meagre quantity of waste, whereas the units generating substantial amount of hazardous wastes are limited in number.

 

GOVERNMENT POLICIES:

The Central Government notified the Municipal Solid Wastes (Management & Handling) Rules 2000 under Sections 3, 6 and 25 of the Environment (Protection) Act 1986 for the purpose of managing municipal and urban wastes/garbage in an environmentally sound manner. Government of West Bengal are the nodal agencies for technical guidance and preparation of project report for the development of municipal solid waste management plan for the municipal authorities situated within Kolkata Metropolitan Area (KMA) and Non-KMA areas respectively. National policy on waste management is set out in the October 1998 policy statement on waste management- Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 162 of 294 | Total 2936 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 162 293 294   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Calcium & Zinc Stabilizers Manufacturing Business

Calcium-based stabilizers (including Ca-Zn) are largely used in wires and cables, in window and technical profiles (also foamed ones), and in any type of pipes (such as soil and sewer pipes, foam core pipes, pressure pipes, corrugated pipes, land drainage pipes and cable ducting) as well as the corresponding fittings. Calcium-based stabilizers have also been introduced in PVC rigid calendering film production when improved organoleptics characteristics are required, for instance as alternative to tin mercaptides in transparent food packaging application or as alternative to tin carboxylates in PVC blown films shrinkable and for candy wrap. Similarly, calcium-based stabilizers are now an alternative to Liquid Mixed Metals (LMM) for several flexible applications, especially for the indoor ones, when stringent air quality requirements are in place (VOC). Calcium Zinc Stabilizers are widely used in PVC rigid and flexible objects. Calcium Zinc Stabilizers are used for manufacturing products like pipes, medical applications, footwear, cables, profiles, as it is a metal free stabilizer. Calcium Zinc Stabilizers are also suitable for non-toxic and food grade PVC items that require FDA and/or similar approval, under food regulatory acts. With high heat stability, it also provides low odour and the most compelling attribute of Calcium Zinc Stabilizers is that they are highly cost effective. The use of calcium/zinc stabiliser systems has been common in PVC. Because of the characteristics of calcium/zinc stabilised materials they are widely used in many flexible and rigid PVC applications. This type of stabilising system can give products which have a high degree of clarity, good mechanical and electrical properties, excellent organoleptic properties and good outdoor weatherability. Calcium Zinc Stabilizer is stringently tested on various parameters of quality in order to ensure quality. Offered range can be used in wide range of applications such as toys, healthcare products, such as blood bags, semi-rigid and flexible foil for food packaging. Calcium/zinc stabilizers have been used in a wide range of applications. These include toys, health care products, such as blood bags, semi-rigid and flexible foil for food packaging, bottles for potable water, as well as for potable water pipe. Features: • Stable • Longer shelf life • No side effects • Best results • Hygienically processed • Free from impurities • Balanced composition Application:- PVC pipes -fitting, electric wire and cable, uPVC pipes-fittings, PVC clothing, PVC furniture, PVC medical tubes and parts, PVC flooring, PVC door-window, PVC footwear, PVC stretch film, PVC celuka foam board/sheet and other many application. Calcium-Zinc based stabilizers (Ca-Zn) are new generation stabilizers which gained importance in PVC market. Market Outlook The global market for stabilizers to increase to approx. US$5.3 billion in 2021. Calcium Zinc stabilizer for PVC are used direct or combination to prevent the various effect such direct or indirect impact of heat and ultraviolet light. This is lead free stabilizer so from last 10 to 15 year due to health and environmental concern. Its consumption is increasing in Europe, USA and Asia. Calcium, zinc and lead are among dominant product segment for stabilizers. Calcium based stabilizers dominate the global demand for stabilizers and the trend is anticipated to continue during the forecast period. Cadmium based stabilizers dominated the global demand for stabilizers however owing to environmental concerns; cadmium was completely substituted with other materials such as lead. Calcium and zinc stabilizers not only have good compatibility and control of viscosity, but also provide good initial coloring and color retention. Major players in the stabilizer market include Eastman Chemical Products Inc., BASF Wyandotte Corp., Chemipro Kasei Kaisha LTD and American Cyanamid Co. among others. Tags #Calcium_Zinc_Stabilizer_Manufacture, #Calcium_Zinc_Stabilizer_Formulation, Calcium/Zinc Stabilizer, #Calcium_Zinc_Stabilizer_Industry, #Calcium_Zinc_Stabilizers_Manufacture in India, Manufacture of Calcium-Zinc stabilizers, Calcium Zinc Stabilizer (CaZn), Calcium/zinc stabilizers for PVC Pressure Pipe, Stabilizer Manufacture, #Calcium_Zinc_Stabilizer_Manufacturing, Ca/Zn Based Stabilizers, Powder Calcium Zinc Stabilizer, Project Report on Calcium Zinc Stabilizer Manufacturing Industry, Detailed Project Report on Calcium Zinc Stabilizer Manufacture, #Project_Report_on_Calcium_Zinc_Stabilizer_Manufacturing, Pre-Investment Feasibility Study on Calcium Zinc Stabilizer Manufacturing, Techno-Economic feasibility study on Calcium Zinc Stabilizer Manufacturing, #Feasibility_report_on_Calcium_Zinc_Stabilizer_Manufacturing, Free Project Profile on Calcium Zinc Stabilizer Manufacturing, Project profile on Calcium Zinc Stabilizer Manufacturing, #Download_free_project_profile_on_Calcium_Zinc_Stabilizer_Manufacturing
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Instrument Cable Manufacturing Industry

Instrument Cable Manufacturing Industry. Production of Instrumentation Cable Instrumentation cables are used to convey low-energy electrical signals for monitoring and controlling electrical power systems. The functions of measurement and control are dependent on the electronic circuitry. These cables possess electrical, thermal, and physical properties and are designed to face harsh conditions like flames or surface abrasion. Instrumentation cables find applications in industrial manufacturing plants to connect electrical instrument circuits and provide communication services for process plants with detailed signal transfer. They also find applications in power plants, steel casting industry, oil refineries and building of ship deck machinery, rolling stock, telecommunication signals and others. The demand for instrumentation cables is primarily driven by the need for power due to growing industrialization. Instrumentation cables are majorly used for conveying low-energy electrical signals for monitoring and controlling electrical systems and sensors. These cables are manufactured according to the different industries need with varied thermal and physical properties that are designed to stand harsh conditions like flames or explosions. Emergence of microprocessor based/computerized instrumentation has significantly necessitated stringent quality requirements along with special electrical parameters for instrumentation cables which augment the technological innovation in instrumentation cables and boosted the market growth in parallel with emergence of internet of things (IoT). Market Outlook Industry analysts forecast the global instrumentation cables Market to grow at a CAGR of 4.09% during the period 2017-2023. Instrumentation cables find applications in industrial manufacturing plants to connect electrical instrument circuits and provide communication services for process plants with detailed signal transfer. They also find applications in power plants, steel casting industry, oil refineries and building of ship deck machinery, rolling stock, telecommunication signals, and others. The demand for instrumentation cables is primarily driven by the need for power due to growing industrialization. Major driver in global instrumentation cables market is growing adoption of the advance monitoring systems and the usage of IoT has been a major factor driving the global instrumentation cables market growth. In addition, the rising opportunities in oil & gas industries and the expansion of smart cities and infrastructure have led to the enlarged demand for instrumentation cables. Instrumentation cables are used to ensure the safety, reliability, and continuous operation of technology in naval vessels. There is growing focus of manufacturers towards improving the marine deck machinery. This in turn, will demand the need for data signals for operation, which will subsequently fuel the need for instrumentation cables. The adoption of technical products is increasing in APAC due to the growing population, urbanization, and industrialization. Also, there is a growing dependence on renewable energy sources to meet the rising demand for electricity. This in turn, will create the need for instrumentation cables. Furthermore, the rise in generation of nuclear power in countries such as China, South Korea, and India will also drive the adoption of instrumentation cables in this region. Wires and cables industry in the India The Indian wire and cable industry in the last 5 years has grown at around 14-15 percent CAGR and this growth rate is expected to increase to 15-16 percent CAGR in the next 5 years, catapulting the total current market of Rs. 49,000 to Rs. 100,000 Cr in the next five years, a good sign for companies to share a pie in this growth and nudge themselves towards top position. The India wires and cables market is comprised of various independent manufacturers that specialize in designing, manufacturing of their products. The wires and cables market in India is led by five major players including Polycab wires, Sterlite technologies, Finolex cables, KEI Industries and Havells India, who cover around ~% of organized market for wires and cables. The wires and cables market in India comprises nearly 40 per cent of the electrical industry and is growing at a CAGR of 15 per cent as a result of growth in the power and infrastructure segments. Each segment in the wires and cables industry such as power cables, control cables, communication cables and others is subject to a gamut of different factors such as price cuts and number of units sold that play an important role in determining their respective revenues. The Transmission and Distribution sector continues to remain in focus, especially, with the outlay of Rs. 2.6 lakh crore announced by the Government for the five-year period ending FY2022. Top Cable Companies in India 2018: • Polycab India Limited • KEI Industries Limited • Sterlite Technologies Limited • Finolex Cables Limited • Birla Cable Limited* (M.P. Birla Group) • Vindhya Telelinks Limited* (M.P. Birla Group) • Universal Cables Limited* (M.P. Birla Group) • Havells India Limited • Sterlite Power Transmission Limited • RR Kabel • Gupta Power Infrastructure Limited • KEC International Limited (With RPG Cables) • Apar Industries Limited (Unit: Uniflex Cables) • V-Guard Industries Pvt. Ltd. • Aksh Optifibre Limited • CMI Limited • Paramount Communications Limited • Dynamic Cables Limited • Chandresh Cables Limited: Avocab Global Wire and Cable Market The global wire and cable market is expected to reach US$ 235.9 Bn by 2026, expanding at a CAGR of 4.1% from 2018 to 2026. According to the report, the global market is expected to continue to be influenced by a range of macroeconomic and industry-specific factors. Asia Pacific is likely to continue to be at the forefront of global demand, with the market in the region expanding at the CAGR of 4.8% through 2026. The demand for wire and cables is directly reliant on the expansion of the industrial sector and infrastructure development in the power generation and transmission, telecommunication, and residential and commercial sectors. Rapid urbanization and rising global population have increased the demand in these areas, thereby offering multiple opportunities to the global wire and cable market. Increasing reserves in smart grid technology, growing renewable energy production, and government initiatives for upgrading the transmission and distribution systems are expected to drive this market. Adoption of smart grid technology has fulfilled the rising need for grid interconnections, significantly resulting in increased investments in new submarine and underground cables. In addition, the market growth is attributed to the growing offshore wind farms and high voltage direct current links. Increasing urbanization and increasing government investments into expansion of power transmission & distribution networks across developed and developing economies are major factors driving growth of the global wire and cable market. In addition, increasing construction of residential and commercial buildings and growing demand for uninterrupted electricity are other major factors expected to boost growth of the global wire and cable market over the forecast period. Tags #Instrument_Cable, #Instrumentation_Cables, #Manufacture_of_Instrumentation_Cables, Instrument Cable Manufacturing Business, Instrumentation Cables Manufacture, #Manufacturing_of_an_Instrument_Control, #Signal_Cables, Cable Manufacturing Plant, #Manufacture_of_Electric_Cables, Electric Instrumentation Cables Manufacture in India, #Wires_&_Cables_Manufacture, Cables Industry, Cable Manufacturing, Instrumentation Cable and Wire Manufacture, Electric Wire and Cable Manufacturing Plant, Wire Making Business, Wire and Cable Making Unit, Cable Manufacture, #Profitable_Business_Ideas_in_Wire_&_Cable_Manufacturing_Industry, How to Start Cables Manufacturing Business, How to Build a Cable Manufacturing Factory, Wire and Cable Manufacture, Manufacture of Cable, #Project_Report_on_Cable_Manufacturing_Industry, Detailed Project Report on Instrumentation Cables Manufacture, Project Report on Instrument Cable Manufacturing Business, Pre-Investment Feasibility Study on Instrument Cable Manufacturing Business, #Techno_Economic_feasibility_study_on_Instrument_Cable_Manufacturing_Business, Feasibility report on Instrument Cable Manufacturing Business, Free Project Profile on Instrument Cable Manufacturing Business, #Project_profile_on_Cable_Manufacturing, Download free project profile on Instrument Cable Manufacturing Business
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start a Beverage Manufacturing Industry

Start a Beverage Manufacturing Industry. Carbonated and Non-Carbonated Drinks (Non-Alcoholic) Manufacturing Business. Production of Carbonated and Non-Carbonated Beverages Carbonated Drinks Carbonated drink is a drink that bubbles and fizzes with carbon dioxide gas. The process by which the gas dissolves in the drink is known as carbonation. This process can occur naturally, such as in naturally carbonated mineral water that absorbs carbon dioxide from the ground, or by man-made processes, as is the case in most soft drinks and soda waters. Carbonated drinks are beverages that contain dissolved carbon dioxide. The dissolution of CO2 in a liquid, gives rise to fizz or effervescence. The process usually involves carbon dioxide under high pressure. When the pressure is removed, the carbon dioxide is released from the solution as small bubbles, which causes the solution to become effervescent, or fizzy. Carbonated drinks are light, sweet water-based drinks that have carbon dioxide added to make them bubbly or fizzy. Milk can actually be carbonated too, but nobody would buy it. Uses Carbonated drinks are very popular throughout the world. In many drinks, the carbonation is used to give "bite" to the flavor. Interestingly, the fizzy sensation of the drinks is almost never caused by the bubbles, but in fact by the presence of dilute carbonic acid created during carbonation. This acid creates a mild tingling sensation on the tongue. Carbonated drinks are an invention that have been very successful and greatly accepted by the mass consumer market in the last century. The carbons that are used for sterilizing purposes to extend drinks self-life, makes the distribution and storage of carbonated soft drinks much easier than that of non-carbonated soft drinks. Non-Carbonated Drinks Non?carbonated beverages represent an important segment of the market for soft drinks, but they present some special technological issues for product developer and manufacturer alike. The principal groups of non?carbonated beverages are Dilutables drinks, ready?to?drink pre?packaged beverages, fruit juices and nectars. There are some soft drinks, of which cola?flavored beverages are the most prominent, which do not rely primarily on fruit flavors. Non-carbonated soft drinks, flavored waters, teas and isotonic drinks demands flexibility and the highest level of operational efficiency. The products are seasonal, to a great extent, and speed to market and a fully stocked distribution channel are elementary to the success of a Soft Drink manufacturer or Bottler. Having a Hygiene Partner who can support this process and address its key requirements is among the critically important factors for success. Market Outlook Carbonated Beverage Carbonated Beverages are commonly known as soft drinks which have carbon dioxide dissolved in it. They don’t have any alcoholic content; hence, they are termed as soft drinks and spans across sparkling drinks, smoothies, juices, ready-to-drink tea and coffee, concentrates, and functional drinks. Carbonated beverages market is segmented based on their product types such as carbonated beverage regular, carbonated beverages diet, lemon/lime regular, and lemon/lime diet. The global carbonated beverages market is expected to reach USD 412.5 billion by 2023, at a CAGR of 2.8%, during the forecast period. Carbonated beverages sector is one of the matured industries in the worldwide beverages market. In the recent past, the industry has undergone major changes regarding product innovations and offerings. To face the growing market challenges, companies are bringing new flavors keeping in mind the health and wellness concerns of consumers. The global market for carbonated beverages is highly fragmented in nature, thanks to the presence of a large pool of companies. At the forefront of this market are PepsiCo, Coca Cola, Dr Pepper Snapple, and Cott. Sinar Sosro, Parle Agro, Asia Brewery, Asahi Soft Drinks, Ito En, Britvic Soft Drinks, Kirin Beverage, Bickford's Australia, Lotte Chilsung Beverage, Frucor Beverages, F&N Foods, Suntory Beverage & Food, Tru Blu Beverages, and National Beverage are some of the other prominent carbonated beverages manufacturers across the world. Carbonated soft drink concentrate are sub-segmented by flavor as cola and non-cola. Among carbonated soft drink concentrate segment, currently cola concentrate is accounting the largest share as compared to non-cola variant. However, increasing consumer consciousness towards their health is expected to support the growth of non-cola soft drink concentrate as cola contains high amount of caffeine. Non-Carbonated Beverage Market The non-carbonated markets are growing at a double-digit growth rate while the Indian carbonated drinks market has declined by 15-20 per cent in the last three years. There has been a strong shift in the consumer beverage demand towards non-carbonated alternatives, creating new opportunities for drinks manufacturers in the country. As several new non-carbonated drinks are frequently making their way into the market, the demand for caps and closures for non-carbonated beverages is slated to fire up to a great extent. Tags #Production_of_Carbonated_and_Non_Carbonated_Drinks, #Carbonated_and_Non_Carbonated_Beverages, #Carbonated_Drink, #Non_Carbonated_Drinks, Production and Packaging of Non-Carbonated, Carbonated and Non-Carbonated Drinks Production, Production of Carbonated Drinks, Carbonated Drink Manufacturing Process, #Soft_Drink_Production, Carbonated Drinks Business Ideas, Soft Drink Industry in India, Business Ideas of Carbonated Drinks, Non-Carbonated Beverages, Manufacturing of Soft Drinks, Carbonation, Beverage Production, Soft Drink Manufacturing Process Pdf, Soft Drink Manufacturing Process Flow Chart, How to Make Soft Drinks Process, Carbonated Soft Drinks, Formulation and Production of Carbonated Soft Drinks, Carbonated Drink Production Plant, Carbonated and Non-Carbonated Soft Drinks, Non-Carbonated Beverages, #Non_Carbonated_Beverages_PPT, Beverage Production Process, Non-Carbonated Drink Industry, Project Report on Carbonated Drink Manufacturing Industry, Detailed Project Report on Non-Carbonated Drinks Production, #Project_Report_on_Carbonated_and_Non_Carbonated_Drinks_Production, Pre-Investment Feasibility Study on Non-Carbonated Drinks Production, #Techno_Economic_feasibility_study_on_Carbonated_Drink_Manufacturing, #Feasibility_report_on_Carbonated_Drink_Manufacturing, Free Project Profile on Carbonated and Non-Carbonated Drinks Production, #Project_profile_on_Carbonated_and_Non_Carbonated_Drinks_Production, Download free project profile on Carbonated and Non-Carbonated Drinks Production, How to Start a Beverage Business, Beverage Industry, Starting a Beverage Production, Starting a Food or Beverage Processing Business, Beverage Manufacturing Business, Food & Beverage Manufacturing, Beverage Manufacture
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Common Facility Centre for Jute

Common Facility Centre for Jute • Raw Material Bank • Fabric Dyeing Unit • Fabric Lamination Unit • Digital & Rotary Printing Unit • Testing Facilities • Skilled Development Centre • Product Research & Development Centre Jute is a natural and eco-friendly vegetable bast fibre extracted from plants whose stems are used as renewable energy resource and for other diversified uses. The products of Jute fibres are reusable, sustainable and bio-degradable and with environmental protection becoming a non- negotiable issue, jute is fast becoming a preferred fibre across the world. Jute is used for producing a huge variety of utility products like gunny bags, hessian, ropes, strings, carpets, rugs and clothes, tarpaulins, upholstery and decoration pieces. In recent time jute fibre is also used to manufacturing men’s shirting materials and women’s sarees, salwar-khameez material, after making softness process of the fibre. Linen fabrics are now a days introduced in the textile market of India The Jute industry occupies an important place in the national economy of India. The Common Facility Centre for development and promotion of jute diversified products will generate self-employment opportunities for people and benefit the peoples in rural areas formed under various state, providing forward linkage with the market for value added products. Jute industry plays an important role in the development and promotion of jute & jute products, processes, marketing and commercialization of technologies for the manufacture of all jute products including jute-diversified and jute technical textiles products and creating awareness of the use of this natural fibre in non-conventional applications. Objectives of setting up Common Facility Centres (CFCs): • Engaging established manufacturers, exporters, institution & agencies for making interventions for product identification, skill development programmes, imparting training to member artisans of WSHGs, supply of raw material and finally marketing of finished products. • Providing modern machinery to the WSHGs required for bulk production; • Arranging space for undertaking bulk/regular production; • Arranging space for proper stocking of finished products; • Provide funds for tool kits to individual beneficiaries through direct bank transfer; • Provide facilities for online E-marketing/E-Commerce; • Priority in participation in the fairs organized by NJB; • Participation in the Design Development workshops; • Diverting bulk requires, if any, to WSHGs for executions; • Promoting WSHGs on NJB’s website and other online media; • Encouraging the formation of Federation of WSHGs for taking charge of operation of CFC. Raw Material Bank for Exports The Jute industry occupies an important place in the national economy of India. It is one of the major industries in the eastern region, particularly in West Bengal. Jute, the golden fibre, meets all the standards for safe‘packaging in view of being a natural, renewable, biodegradable and eco-friendly product. Raw jute crop is an important cash crop to the farmers. Cultivation of raw jute crop provides not only fibre which has industrial use, but jute stick which is used as fuel and building material by the farming community. • Raw material bank for raw jute should be setup for export requirements. The raw jute available from the Raw Material Bank would be at a competitive price, as raw jute will be procured in bulk quantity during the peak season. Most of the raw jute should be procured during the peak season (e.g. August to October) of availability of jute, from farmers/mukams sufficient to support exports for the entire year. • Exporters/manufacturers will be able to procure jute from the Raw Material Bank only for exports, on providing the purchase order from the client initially and the bill of lading once the shipment is done. • The raw material bank will help in removing fluctuation in jute prices and enable exporters to quote stable prices to their customers and also improve their production planning and forecasting. This will further increase the trust and reliability of Indian products among the customers. Market Outlook Jute is the second most important vegetable fiber after cotton due to its versatility. It is 100% biodegradable and eco-friendly fiber and do not pollute our environment like plastic products and poly bags. Day by day the demands of jute goods are increasingly rapidly. The India jute industry is an integral part of the Indian Textile Industry. India jute industry is an old industry and it is predominant in the eastern part of India. The jute textile market in India is expanding in spite of rising competition from synthetic fibres. To push growth in the jute industry, the government of India passed a stricture that at least 90 per cent of the production of food grains and sugar should be packed in jute. Such attempts by the government to revive the jute industry have helped in the consistent growth of jute textile. Jute is predominantly used as a packing material in form of gunny bags but jute fibre applications have a range of uses from home decor like carpets, to fashion accessories, geo-textiles and floor mats. The India jute industry is an integral part of the Indian Textile Industry. India jute industry is an old industry and it is predominant in the eastern part of India. The jute industry in India engages around 2.6 lakh workers directly and around 1.4 lakh workers indirectly in the allied sectors. Currently, there are 83 composite jute mills in India. West Bengal leads the list with 64 jute mills, followed by Andhra Pradesh, which has seven. Bihar and Uttar Pradesh have three mills each. These mills contribute to a diverse range of jute products from gunny bags to home decor items including economical and eco-friendly twill bags, geo-textiles that do not allow easy water penetration, carpets and floor rugs. India, Bangladesh, China, Myanmar, Nepal and Thailand are at present the major producers of Jute, Kenaf and Roselle fibres. India, Bangladesh and China are the large producers. Jute is a natural fiber popularly known as the golden fiber. It is one of the cheapest and the strongest of all natural fibers and considered as fiber of the future. Jute is second only to cotton in world’s production of textile fibers. India, Bangladesh, China and Thailand are the leading producers of Jute. It is also produced in southwest Asia and Brazil. The two main types of jute, white jute (Corchorus Capsularies) and dark jute or tossa (Corchorus Olitorius) are grown in India, Bangladesh, Thailand, China and south Asian countries. Tags #Common_Facility_Centre_for_Jute, #Common_Facility_Centres_(Cfcs), Setting up of Common Facility Center (Cfc) for Jute, Jute Industry, Raw Material Bank for Exports, #Raw_Material_Bank, #Fabric_Dyeing_Unit, Fabric Lamination Unit, Digital & Rotary Printing Unit, Testing Facilities, Skilled Development Centre, Product Research & Development Centre, #Jute_Common_Facility_Centre, Jute Industry, #Jute_and_Jute_Textile_Industry, Jute Sector, Jute Production, Jute Industry in India, Jute Textiles Industry in India, #Common_Facility_Centre_Pdf, Dyeing of Jute Fabric, Jute Raw Material Bank, Jute Dyeing, Laminated Jute Fabric, Digital & Rotary Printing Unit for Jute, Digital Jute Print Fabric, Skill Development Centre for Jute Industry, #How_to_Start_Jute_Business, Jute Sector in India, Jute Business Opportunity in India, Jute Business in India, Detailed Project Report on Common Facility Centre for Jute, Project Report on Common Facility Centre for Jute, #Pre_Investment_Feasibility_Study_on_Common_Facility_Centre_for_Jute, Techno-Economic feasibility study on Jute Raw Material Bank, Feasibility report on Common Facility Centre for Jute, #Free_Project_Profile_on_Common_Facility_Centre_for_Jute, Project profile on Jute Raw Material Bank, #Download_free_project_profile_on_Common_Facility_Centre_for_Jute
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Mini Steel Plant

Mini Steel Plant. Production of TMT Bars, Flats, Angles, Channels and Girder. Steel Long Products Manufacturing Business Steel is an alloy of iron and carbon containing less than 2% carbon and 1% manganese and small amounts of silicon, phosphorus, sulphur and oxygen. Steel is the world's most important engineering and construction material. It is used in every aspect of our lives; in cars and construction products, refrigerators and washing machines, cargo ships and surgical scalpels. Mini steel mills are normally secondary steel producers located near consumer markets & based mainly on steel/iron scrap of different grades. The mini steel plant comprises of steel melting using induction furnace or electric furnace to melt scrap & sometimes mix of scrap and sponge iron/DRI; the billet making machine or CCM (continuous casting machine) to cast billets for further rolling of mainly of mainly long products. Thermo-Mechanically Treated Bars, (TMT Bars), are Extra High Strength Reinforcing bars which replacing any form of cold twisting, the technology of yesteryears. In this process, the steel TMT bars receive a short, intensive cooling as they pass through the specially resigned Tempcore Water Cooling System after the last Rolling Mill Stand. The sudden quenching converts the surface layer of the steel bar to a hardened structure. These bars have a great degree of elasticity. The soft ferrite-pearlite core of the TMT bars gives them superior bendability. These bars can be easily bent and moulded into any shape and used for a wide range of constructional purposes. Flat Steel products refer to semi-finished steel products such as sheets and plates. Flat steel products are of immense importance to steelmakers since they are used in diverse applications across various end-use industries. Application in automobiles, construction, shipbuilding, industrial machinery, and domestic appliances are among the primary uses of flat steel. Flat steel has a wide range of applications in thermal power plants, hydro power plants, oil & gas, solar, nuclear and wind energy industries. It is also used by various light bar industries, truck trailers, railways and automobile manufacturers. Steel Angles are the most basic type of roll-formed steel. They are formed by bending a single angle in a piece of steel. Angle Steel is ‘L’ shaped; the most common type of Steel Angles are at a 90 degree angle. The legs of the “L” can be equal or unequal in length. Steel angles are used for various purposes in a number of industries. Framing is one of the most common uses for steel angles, but steel angles are also used for brackets, trim, reinforcements, and many other uses. The larger the steel angle, the more weight and stress it can bear. Steel channel is a hot-rolled carbon steel made in a “C” shape. Constructed using a vertical web and top and bottom horizontal flanges with inside radius corners, it is available in a wide range of sizes and thicknesses. The shape provides superior structural support, making it an ideal product for frames and braces used for machinery, enclosure, vehicle, building and structural support applications. Steel Girders are a type of steel beams. Girders are collector beams, they are the main horizontal supports of a structure which support the smaller beams. The Girders are widely used around the world for the construction of bridges due to their various advantages which include improvement in efficiency of installation and providing sustainable solutions. Indiana had foreseen this market demand in India and commenced the fabrication of Steel Girders. Market Outlook India was the world’s second-largest steel producer with production standing at 106.5 MT in 2018. The growth in the Indian steel sector has been driven by domestic availability of raw materials such as iron ore and cost-effective labour. Consequently, the steel sector has been a major contributor to India’s manufacturing output. The Indian steel industry is very modern with state-of-the-art steel mills. It has always strived for continuous modernization and up-gradation of older plants and higher energy efficiency levels. Indian steel industries are classified into three categories such as major producers, main producers and secondary producers. Steel demand in India is expected to grow above 7 per cent in the current as well as next year. The wide range of continuing infrastructure projects is likely to support growth in steel demand above 7 per cent in both 2019 and 2020." In developing economies in Asia, excluding China, the demand is expected to grow by 6.5 per cent and 6.4 per cent in 2019 and 2020. Rising population coupled with ever-increasing urbanization leads to rise in demand for infrastructure in emerging economies. There is rising demand for domestic and commercial buildings in China. This is accompanied with the rising industrial development caused due to infrastructural development in the region. India is an important emerging economy. Furthermore, the region is characterized by substantial investment in the construction sector coupled with investment in the education and healthcare sector. Increasing industries are shaping the economy of this region. Economic development in the region has led to the construction of considerable number of bridges and roads that point toward better quality infrastructure. Therefore, infrastructural development increases demand for steel long products, as these products help strengthen structural integrity. Steel long products are able to absorb extra heat energy and can offer better stability in case of extreme weather conditions. These factors help to strengthen the building and other construction, thus triggering the expansion of the global steel product industry. Increase in pollution causes frequent and sudden change in the climate, which increases the possibility of natural calamities. This, in turn, increases the need for better quality construction, thus boosting the prospects of the steel long products market during the forecast period. The sale of construction materials including TMT bars are estimated to grow at a Compounded Annual Growth Rate (CAGR) of 6.18% in terms of volume. Currently, the size of the Indian construction industry is USD 2.8 billion. Recently the government has announced an early completion of 10 million rural houses by the end of 2018, ahead of 2018 deadline and 11.8 million urban houses by 2020 instead or 2022 deadline under the “Housing for All” initiative. This will require huge amount of TMT bars and we expect multifold growth in demand in the coming years. Increase in demand for low cost reinforcement bars in construction projects such as dams and bridges drives the global thermo-mechanically treated (TMT) steel bars market. Rise in government support for the production of steel and coal propels the thermo-mechanically treated (TMT) steel bars market. Thermo-mechanically treated (TMT) steel bars are preferred over torsional bars, as these have high strength and ductility. This is a key factor boosting the demand for global thermo-mechanically treated (TMT) steel bars market. However, technical constraints such as the properties such as ductility and strength associated with high-grade thermo-mechanically treated (TMT) steel bars are anticipated to hamper the global thermo-mechanically treated (TMT) steel bars market. Flat steel market revenue is expected to grow at a rapid growth rate, over the forecast period. The market is anticipated to perform well in the near future owing to the low cost of cold rolled steel sheets compared to hot rolled sheets and expanding industrialization. Moreover, increasing public sector expenditure and the rise in infrastructure investments are some of the factors that can propel the market revenue growth of flat steel soon. Based on product type, sheets segment is projected to lead the global flat steel market over the forecast period attributed to the extensive use of hot rolled steel sheets for the development of the major sized structures such as heavy equipment, construction, and railroads, and high malleable property. On the other hand, the cold rolled sheets are a finished form of the sheet used when a surface finishing is required automotive parts. The cold steel is processed in cold reduction mills at room temperature along with tempers rolling which make steel closer dimensional tolerance, improve surface finish, and enhance the tensile strength. On the basis of end-users, this market has been segmented into automobiles, construction & infrastructure, transport, and others. In developed countries, flat steel products are always in demand in the automobile sector. Due to the design flexibility, high strength, and increased durability, flat steel is used in the building & infrastructure sector. It also reduces the maintenance costs. List of Ten Best Steel Companies in India: • Rashtriya Ispat Nigam Limited (RINL) • VISA Steel • Essar Steel • TATA Steel • JSW Steel • Bhushan Steel • MESCO Steel • FACOR Steel • Steel Authority of India Limited (SAIL) • Jindal Steel and Power Some of the prominent players in the flat steel market are ArcelorMittal S.A., Allegheny Technologies Inc., Zeeco Metals, Inc., SSAB AB, Clingan Steel, Inc., United States Steel Corporation, AK Steel Holding Corporation, Hascall Steel Co., Essar Group ThyssenKrupp AG, Posco Co. Ltd., Precision Brand Products, Inc., Johnson Bros. Metal Forming Co., Voestalpine AG, Jindal Steel and Power Limited, JSW Steel Ltd., Tata Steel Limited, Nippon Steel & Sumitomo Metal Corp, Hyundai Steel Co., and Steel Authority of India Limited (SAIL), and many more. Tags #Steel_Plant, #Starting_a_Steel_Mini_Mill, #Mini_Steel_Plant, #Steel_Industry, Long Steel Products, Steel Products, Indian Steel Industry, #Manufacturing_Process_of_Long_Products, Steel Production, Flat and Long Steel Products, Steel Production In India, #Steel_Manufacturing_Process_PPT, Manufacture of Steel Long Products, How are TMT Bars Manufactured, Start your Steel Mill Business, #TMT_Bars_Manufacturing_Process, TMT Bars Manufacturing Business, TMT Steel Bars, What is the Manufacturing Process of TMT Steel Bars? TMT Bar Manufacturing Process PPT, TMT Bars Manufacturing Process Pdf, TMT Bars Manufacturing Plant, #TMT_Bars_Production, Steel TMT Bars, TMT Steel Bar (Saria/Rod) Manufacturing Industry, Flat Steel, Stainless Steel Angles, Steel Angles, Manufacturing Process of Steel Angles, Production of Angle and Channel, Steel Manufacture, #Steel_Angle_Manufacture, TMT Bars Manufacture, Structural Steel Angles & Channel, Channels, Steel Girder, How to Start a Steel Manufacturing, #How_to_Start_a_Steel_Business, Profitable Steel Business Ideas, Starting a Steel Business, Steel Production Business, How to Setup a Steel Plant, Setting up Steel Industry in India, Project Report on Mini Steel Plant, Detailed Project Report on Mini Steel Plant, Project Report on Mini Steel Plant, Pre-Investment Feasibility Study on TMT Bars Manufacturing, Techno-Economic feasibility study on Mini Steel Plant, Feasibility report on Production of Angle and Channel, Free Project Profile on Production of Angle and Channel, Project profile on Steel Angle Manufacture, Download free project profile on Mini Steel Plant
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Wire Drawing with Wire Galvanizing Plant

Wire Drawing with Wire Galvanizing Plant. Hot Dip Galvanizing Plant. Galvanized Mild Steel (MS) Wire A wire is a circular, small diameter flexible rod. Wire drawing is a cold working process. It is an operation to produce wire of various sizes within certain specific tolerances. This process involves reducing diameter of thick wire by passing it through a series of wire drawing dies with successive die having smaller diameter than the preceding one. Mostly die are made by chilled cast iron, tungsten carbide, diamond or other tool material. The maximum reduction in area of wire is less than 45% in one pass. Wire drawing, Making of wire, generally from a rod or bar. The wire-drawing process consists of pointing the rod, threading the pointed end through a die, and attaching the end to a drawing block. The block, made to revolve by an electric motor, pulls the lubricated rod through the die, reducing it in diameter and increasing its length. Fine wire is made by a multiple-block machine, because the reduction cannot be performed in a single draft. Drawing is a widely used process because of its unbeatable advantages over any other procedure. The advantages of wire and rod drawing of other applications are: • Good surface finishing • Adaptability to mass production • Close dimensional control • Improved dimensional properties • Economic benefits Commercial wire drawing usually starts with a coil of hot rolled 9 mm diameter wire. The surface is first treated to remove scales. It is then fed into a wire drawing machine which may have one or more blocks in series. Wires are drawn from carbon steel, alloy steel, stainless steel, etc. ferrous metals as also from aluminum, copper, brass, bronze and many other alloys. Nonferrous wires are used in electrical power transmission, viz. wires and cables, electronics systems and even in semiconductor IC etc. packaging, motor and transformer windings. Galvanizing is the practice of immersing clean, oxide-free iron or steel into molten zinc in order to form a zinc coating that is metallurgically bonded to the iron or steel's surface. The zinc coating protects the surface against corrosion by providing protection to the iron or steel in two ways. Hot-dip galvanized wire application: This kind of wire is extensively used in such place: • Construction. • Handicrafts. • Woven wire mesh. • Express way fencing mesh. • Packaging of product. Advantages of using galvanized MS wire: • Softness of wire • Smoothness make the appearance look better • Shining • Uniform coating increases the product life • Perfect MS wire ensures double life than any other ordinary galvanized wire available in the market. Market Outlook Galvanized M.S. Wire has versatile use in producing different engineering items such as Building Hardware’s, barbed wires, Screens rivets etc. Special quality of wire is also required for producing special purpose fasteners, reinforcement wire etc. The Galvanized M.S. Wire is a Mild Wire which is coated with a steel layer of Zinc. The coating of Zinc provides cathodic protection to underneath Steel surface. The Galvanized M.S. Wire offers better surface protection at lower cost in humid atmosphere. The Galvanized M.S. Wire has very good demand for its versatile use in different applications. There is a large demand for this item from the downstream industries. With the availability of appropriate technology, the activity is highly feasible in the small scale sector and marketing is generally not a problem. The more and more electrification and expansion of railway network associated with gauge conversion of railway track is expected to create huge market. On other hand the demand in the field of pre-casted cement product and domestic is expected to increase in many folds. Same way expansion of telephone network will also add demand. It is also used in strand which has got market in electrical and railways etc. G.I. Wires is also used in shipping in the form of round strand. Construction, machinery and automotive markets especially present significant opportunities for steel wire. Steel wires are also used in a range of infrastructure constructions and many general engineering applications in machinery and heavy equipment and marine industry. In the automotive industry, steel wires are used for reinforcing tires to add to their strength and durability. Steel binding wires are used to bind and fabricate complex steel reinforcement structures for building of all types. Steel wire is of critical importance in automotive manufacturing for controls. The projected increase in infrastructure and housing construction and Automobile sector in the coming years is expected to benefit demand for steel and other metal wire industry. Steel wire finds mission critical use in this sector as drilling lines, geophysical cable, offshore mooring ropes and electromechanical cable, and for mooring anchoring, towing, and lifting applications. There is a plethora of growth opportunities for Indian steel wire market. Rapidly expanding construction, infrastructure, telecom and manufacturing industries bode well for the Indian steel wire market. The global galvanized steel market to grow at a CAGR of more than 5% during the period 2018-2022. The rising applications of galvanized steel pipes in the oil and gas industry are one of the major trends being witnessed in the global galvanized steel market. Galvanized steel pipes are widely used in the oil and gas industry for various applications such as exploration, refining, and transportation. The pipes used in the oil and gas industry should be durable and thermally stable. These pipes work under harsh environmental and chemical conditions. In 2015, the revenue of Galvanized Steel wire in the USA market was about 124.77 million USD, and in 2016, the revenue of Galvanized Steel wire in the USA market was about 129.79 million USD. Tags #Wire_Drawing, #Steel_Wire_Drawing, #Application_of_Wire_Drawing_Process, #Wire_Drawing_Process_PPT, Wire Drawing Process Pdf, Wire Drawing Plant, Wire Drawing Business, #Wire_Drawing_Process_for_Steel, Wire Drawing Process, Wire Galvanizing Plant, Wire Galvanizing, #Wire_Galvanizing_Process, Steel Wire Galvanizing Plant, Galvanized Steel Wire, Galvanized Wire Plant, #Galvanizing_Plant, Galvanizing Plant Process, #Galvanized_Wire, Project Report on Wire Drawing with Galvanizing Plant, #Detailed_Project_Report_on_Wire_Drawing_with_Galvanizing_Plant, Industrial Galvanized Wire, Project Report on Wire Drawing with Galvanizing Plant, Pre-Investment Feasibility Study on Wire Drawing with Galvanizing Plant, Techno-Economic feasibility study on Wire Drawing with Galvanizing Plant, Mild Steel Galvanized Wire, Feasibility report on Wire Drawing with Galvanizing Plant, #Free_Project_Profile_on_Wire_Drawing_with_Galvanizing_Plant, Project profile on Wire Drawing with Galvanizing Plant, Download free project profile on Wire Drawing with Galvanizing Plant, Galvanized M.S. Wire, Hot Dip Galvanizing Plant, Mild Steel Galvanized Wire, Hot Dip Galvanized Wires, Galvanized Wire
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

PVC Wire and Cable Manufacturing Industry

PVC Wire and Cable Manufacturing Industry. Electrical Cables. Electric Wire for House. Production of PVC Insulated House Wire House wiring consists of an electrical wiring system that distributes energy to be used in equipment and appliances around the house. It also involves the proper installation and operation of the electrical outlets, switches, breakers, meter base and different electrical circuits. Features • Excellent Electrical & mechanical properties. • High Flame retardant properties. • Higher Flexibility ensure easy handling & longer life. • Steam and boiling water resistant & anti-rodent. • 100% copper conductivity • 99.96% pure electrolytic copper • Dual layer in insulation provides better strength • High flexibility due to uniform bunching. • Attractive packaging • High ageing property These wires are flame retardant and PVC insulated making them highly suitable for domestic household applications. These house wires at highly economical prices in market. The wire offered by is widely used in houses and apartments for wiring purposes. Available in numerous technical specifications, this wire is known for its excellent finish, durability and can be availed at marginal prices. Market Outlook India insulated wire and cable market is forecast to grow at a CAGR of 10.3% through 2023, predominantly on account of growing government investments towards infrastructure development projects. Development of Smart Cities across the country under Smart Cities Mission coupled with increasing number of electronic devices per household and development of manufacturing industries under the ‘Make in India’ initiative, which is driving demand for power, are expected to boost market demand in the coming years. Moreover, growing demand for reliable, efficient energy and data communication from rural areas and tier II and tier III cities and towns would positively influence the country’s insulated wire and cable market. Moreover, growing demand for reliable, efficient energy and data communication from rural areas and tier II and tier III cities and towns would positively influence the country's insulated wire and cable market. Some of the major players operating in India insulated wire and cable market are Polycab Wires Pvt. Ltd., Havells India Ltd., Finolex Cables Limited, KEI Industries Ltd., RR Kabel Limited, Universal Cables Ltd., Uniflex Cables Limited, V – Guard Industries Ltd, Gupta Power Infrastructure Limited, KEC International Limited, etc. Wire and Cable Industry The wires and cables market in India comprises nearly 40 per cent of the electrical industry and is growing at a CAGR of 15 per cent as a result of growth in the power and infrastructure segments. The wires and cables market in India is highly fragmented, with the presence a number of small and medium enterprises. The organized sector manufactures high voltage durable and specialty cables, whereas the unorganized sector mainly captures the low voltage market, where products are mainly differentiated on the basis of price. Growth in wires and cables market can also be attributed to the introduction of latest technologies by manufacturers in India and swift expansion of automated and innovative cost reducing manufacturing technologies, which have significantly improved the throughput of wires and cables products. The global wires and cables market size was estimated at USD 186.09 billion in 2017 and is estimated to witness a CAGR of 6.4% over the forecast period. Increasing reserves in smart grid technology, growing renewable energy production, and government initiatives for upgrading the transmission and distribution systems are expected to drive this market. Adoption of smart grid technology has fulfilled the rising need for grid interconnections, significantly resulting in increased investments in new submarine and underground cables. In addition, the market growth is attributed to the growing offshore wind farms and high voltage direct current links. The demand for wire and cables is directly reliant on the expansion of the industrial sector and infrastructure development in the power generation and transmission, telecommunication, and residential and commercial sectors. Rapid urbanization and rising global population have increased the demand in these areas, thereby offering multiple opportunities to the global wire and cable market. The global wire and cable market can be broadly segmented by based on type, material, and application. By In terms of type, the low voltage wire and cable segment is consistently expected to constitute a dominant market share between 2018 and 2026. Increasing urbanization, which is resulting in the expansion of power transmission & distribution networks and rise in residential & commercial buildings, is a major factor attributed to the segment’s high share. Moreover, rising demand for low-voltage wires in electrical installations of automobiles is another factor accounting for its dominance throughout the forecast period. The market is expected to grow in the coming years with increasing number of innovative product launches by the existing players, focusing on niche uses and convenience such as fire resistant (retardant) wires and cables, optical fibre cables and others. With the consumers becoming more perceptive towards value addition, providing products by anticipating the consumer needs in advance and broadening the appeal of the product to suit a variety of needs could prove vital for the growth of this industry in the coming years. Tags #House_Wire, #House_Wiring_Cables, #Wire_Manufacturing_Process, #Wire_Manufacturing_Plant_Cost, Wire Manufacture, Wire Making Business, Wires and Cables, Manufacture of Wire, Wire Manufacturing, #Electrical_House_Wires_Manufacture, Domestic and Commercial Wire, #Housing_Wire, House Wire Manufacturing Business, Electrical Wires, House Wire Manufacture, #House_Wire_Production, Household Wire, How to Build a Wire/Cable Manufacturing Factory, Wires & Cables Manufacture in India, House Wire Manufacture in India, #Electric_Wire_and_Cable Manufacturing Plant, Wire & Cable Manufacturing Industry, #PVC_House_Wire, PVC Insulated House Wire, PVC Insulated Wire, House Wires (PVC Insulated), PVC Insulated Wire Manufacture, #Project_Report_on_House_Wire_Manufacturing_Industry, Detailed Project Report on PVC Insulated Wire Manufacture, Project Report on House Wire Manufacturing, Pre-Investment Feasibility Study on House Wire Production, Techno-Economic feasibility study on House Wire Manufacturing, Feasibility report on PVC Insulated Wire Manufacture, Free Project Profile on House Wire Production, Project profile on House Wire Manufacturing, Download free project profile on House Wire Production, PVC House Electrical Wires, Electrical House Wiring, PVC Wire and Cable Manufacturing Industry, Electrical Cables, Electric Wire for House. Production of PVC Insulated House Wire, PVC Wires and Cables, PVC Insulated Copper Cable, Electrical Wires, Cables and Wires, Wire & Cable Manufacture, Electrical Wires & Cables, Housing Wire, Electrical House Wiring, PVC Insulated Cables, Insulated Wire and Cable
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

MIG Welding Wire

MIG Wire is Copper coated strong wire. MIG wires are applied to weld numerous ferrous and non-ferrous materials and give sound results Solid copper coated welding wire for welding in gas shielding atmospheres. MIG welding wire applications are like Pressure Vessels, Heat Exchangers, Automotive parts etc. The Indian welding consumables market will be worth INR 45.37 bn by 2020. On the basis of type of welding consumables, the demand for wires and fluxes is expected to be high on account of their high performance. They also have several benefits including suitability for outdoor work, use in automatic welding systems, low wastage, and high productivity. This facilitates the development of new technologies and ensures a high quality product. Few Indian major players are as under • Ador Welding Ltd. • Bobshell Electrodes Ltd. • Classic Electrodes (India) Ltd. • D & H India Ltd. • Diffusion Engineers Ltd. • Dwekam Electrodes Pvt. Ltd.
Plant capacity: 840 MT/AnnumPlant & machinery: Rs 122 lakhs
Working capital: -T.C.I: Cost of Project: Rs 318 lakhs
Return: 27.00%Break even: 64.00%
Add to Inquiry Add to Inquiry Basket

Empty Hard Gelatin Capsules

Hard gelatin capsules are made of two shells: the capsule body and a shorter cap. They are clear, colorless, and essentially tasteless. Two-piece capsules have been used for almost a century in the pharmaceutical field and the gelatin has been adopted as the main material of these capsules due to its excellent characteristic as a gelatinizer. The global empty hard gelatin capsules market was valued at $1,841.5 million in 2017 and is expected to reach $3,707.5 million by 2025, registering a CAGR of 9.1% from 2018 to 2025. Capsules are relatively stable shells that contain or encapsulate medicines, which are administered in a variety of dosage forms. As a whole there is a good scope for new entrepreneur to invest in this business. Few Indian major players are as under • A B L Biotechnologies Ltd. • A C G Arts & Properties Pvt. Ltd. • Akums Drugs & Pharmaceuticals Ltd. • Capsugel Healthcare Ltd. • Chemcaps Ltd. • Dinesh Remedies Ltd.
Plant capacity: 2500 Th.Nos./ dayPlant & machinery: Rs 1565 lakhs
Working capital: -T.C.I: Cost of Project: Rs 2149 lakhs
Return: 28.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Peanut Oil

Peanut oil, also known by other names such as groundnut oil and arachis oil, is a type of vegetable oil commonly used in cooking that is derived from peanuts. It comes in a number of varieties, including refined, unrefined, roasted, and cold-pressed, which have slight differences in their nutritional value and health benefits. Peanut oil is most commonly used in Asian cultures, including that of China and Southeast Asian nations like Vietnam, Laos, and Cambodia. The health benefits of peanut oil include skin care, lower cholesterol levels, improved heart health, and nervous system. Last year, India had exported about 10,000 tonnes of groundnut oil in consumer packages. According to the Solvent Extractors Association of India (SEA), the country produces about 300,000-350,000 tonnes every year, and has potential to export about 40,000-50,000 tonnes in bulk. China is the biggest market for Indian groundnut oil. Thus, due to demand it is best to invest in this project. Few Indian major players are as under • Akola Oil Inds. Ltd. • Chakan Vegoils Ltd. • Growmore Solvent Ltd. • Modern Proteins Ltd. • Raghunath Cotton & Oil Products Ltd. • V V V & Sons Edible Oils Ltd.
Plant capacity: 8 MT/ dayPlant & machinery: Rs 61 lakhs
Working capital: -T.C.I: Cost of Project: Rs 162 lakhs
Return: 28.00%Break even: 62.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 162 of 294 | Total 2936 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 162 293 294   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top