REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Tripura- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Tripura is a state in Northeast India. The third-smallest state in the country, it covers 10,491 km2 (4,051 sq mi) and is bordered by Bangladesh (East Bengal) to the north, south, and west, and the Indian states of Assam and Mizoram to the east. Tripura is a landlocked state in North East India. The state has a tropical savanna climate, designated Aw under the Köppen climate classification. The undulating topography leads to local variations, particularly in the hill ranges. The four main seasons are winter, from December to February; pre-monsoon or summer, from March to April; monsoon, from May to September; and post-monsoon, from October to November.

Tripura's gross state domestic product for 2010–11 was 129.47 billion (US$2.1 billion) at constant price (2004–05), recording 5.71 per cent growth over the previous year. In the same period, the GDP of India was 48778.42 billion (US$790 billion), with a growth rate of 8.55 per cent. Tripura is an agrarian state with more than half of the population dependent on agriculture and allied activities. However, due to hilly terrain and forest cover, only 27 per cent of the land is available for cultivation. Rice, the major crop of the state, is cultivated in 91 per cent of the cropped area.

TOURISM

Tripura has a geographical area of about 10,492 sq. km. almost two-thirds of the state is under hilly terrain and it is surrounded on three sides by the deltaic basin of Bangladesh. The Tripura tribal’s are divided into two groups: Puran Tripuras and Natun Tripuras. The Puran Tripuras are the original inhabitants of the State and constitute a little over 16% of the total and 57% of the tribal population of the State. The Department of Tourism, Govt. of India, under the ministry of Tourism and Culture has been providing liberal financial and technical support for the tourism development in the state based on the projects received from the states. It is quite clear that Tripura has tremendous and quite unique tourism potential. This could be tapped mainly through the concept of Eco-tourism and Heritage tourism. Nature / wildlife tourism, adventure tourism, rural tourism, leisure tourism, pilgrimage tourism, international border tourism could be some special tourist packages. The Tourism Development in the Northeast region will depend on integrated approach, involving various government departments, private entrepreneurs, voluntary organizations and local community. This approach will also help in evolving local people’s perception towards tourism development as a strong tool for socio-economic up liftment.

INDUSTRIAL SECTOR

The State Government offers a package of incentives for setting up of industrial units, which is comparable to other states. Besides, the special incentive package i.e. North East Industrial and Investment Promotion Policy (NEIIP) declared by the Government of India for the North East Region is available to industrial units.

State Package of Incentives under Tripura Industrial Investment Promotion Incentive Scheme-

•                    Capital Investment Subsidy @ 30% and additional subsidy @ 2.5% for enterprises of ST, SC, & women individuals on Fixed Capital Investment.

•                    Full Reimbursement of Standard Certification Fees /Charges / other expenses on account of obtaining a standard Certification.

•                    Provides State Transport Subsidy for covering the portion for which Central Transport Subsidy is not available

•                    85% Exemption from the payment of Earnest Money and Security Deposits on tenders floated by State Govt. Department / Agencies.

Incentives declared by Central Government:

•                    Exemption of Excise Duty on finished products.

•                    Central Transport Subsidy.

•                    Income Tax Benefit.

•                    Capital Investment Subsidy.

•                    Comprehensive Insurance Scheme for insurance coverage. Subsidies to service sector, bio-technology and power generating industries.

INVESTMENT OPPORTUNITIES

Tripura offers an investor-friendly environment. The Government welcomes investments into the State, from both domestic and foreign investors.

•        Natural gas

Tripura has vast reserves of natural gas in non-associate form. The gas is of high quality, with high methane content of up to 97%. The availability of superior quality natural gas, at concessional price, offers a great opportunity to prospective investors, to set up gas-based industrial units, using natural gas

•        Information Technology (IT)

Tripura has been considered the second best IT destination in the North East. IT sector (including IT-enabled services) has been identified as one of the major potential growth sectors by the state. The high literacy rate of the State provides additional advantage for development of the sector.

•        Food Processing

The State government has identified food processing as a major thrust area. There is a vast potential for setting up of food processing units in the State. The agro-climatic conditions in Tripura are ideally suited for production of a large variety of horticultural crops.

•        Handicrafts

From time immemorial, Tripura has carved out a name for itself in the field of handicrafts. The gifted artisans produce wonderful objects of crafts from simple material like cane, bamboo and wood.

•        Tourism

Tripura is an attractive tourist destination. The state has a rich cultural heritage. There are number of historical Hindu and Buddhist sites.


INDUSTRIAL POLICY

•        To improve Basic as well Industrial Infrastructure.

•        Industrial Growth by attracting Private Investment.

•        To improve investment climate towards better regulation by removing barriers to competition.

•        Creation of hassle-free and congenial investment climate.

•        To bring significant increase in the State Domestic Product.

•        Widening of resources base of the state.

•        Development of connectivity (Internal road, railways and air & telecom).

•        Better social infrastructure Enabling Entrepreneurship -building capacities through entrepreneurial and technical skills, training and promotion of self-employment.

 THRUST AREAS

•        Natural Gas

•        Food Processing

•        Rubber

•        Tea

•        Handicraft

•        Bamboo

•        Handloom

•        Tourism

•        Information Technology

•        Education

  •           Healthcare

The Department of Industries & Commerce was established to promote Village and Small-scale industries as well as medium and large scale industries in the State. While efforts are being made to promote entrepreneurship within the State, the outside investors in the public and private sectors are also encouraged both for their financial capabilities and technical expertise, for the medium and large-scale units. The major existing industrial area is the Industrial Growth Centre Complex at Bodhjungnagar which also includes Food Park, Rubber Park and Export Promotion Industrial Park. The other industrial sites near Agartala as the main business and industrial centres are Dukli, Arundhatinagar and Badharghat. The mineral resources are minor amounts of glass sands, limestone, plastic clay and hard rock and all of these materials are being used in varying degrees. Setting up of ceramic tiles unit and other mineral based industries are being encouraged in the private sector.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 19 of 254 | Total 2538 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 .... 253 254   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Egg Powder - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Egg is a highly nutritious product. Eggs are rich in protein, vitamins and minerals. The poultry sector has made tremendous progress in the last decade. It has grown into an organized and highly productive industry. Fresh eggs have a very limited shelf life. To improve the shelf life and for ease of storage and usage egg powder is very convenient. It is quite stable at room temperature and can be stored over longer period. The manufacture of egg powder is an important segment of egg consumption. Egg powder is one of the most common products in poultry industry in the country. Egg is one of the most versatile and near perfect foods in nature. It is rich in protein, amino-acids, vitamins and most mineral substances, the yolk and white components are all of high biological value and are readily digested. They are known to supply the best proteins besides milk. The egg processing operation separates eggs into different kinds of egg products: egg white, egg yolk, whole egg and several mixes i.e. by adding sugar or salt. The pasteurized liquid egg is either packed as a final product or, in case of egg powder production; it goes via pipelines into a spray dryer plant. Therefore it is a good project to invest. Few Indian Major Players are as under • Balaji Foods & Feeds Ltd. • Gayatri International Ltd. • Indo-Dutch Proteins Ltd. • Ovobel Foods Ltd. • S K M Egg Products Export (India) Ltd. • Western Foods Ltd.
Plant capacity: 4.2MT/DayPlant & machinery: Rs 672 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 1044 Lakhs
Return: 26.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Pulp and Paper from Bamboo - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Paper is a major product of the forestry industry, and is used widely in our society. Paper products are used not only in their obvious applications in the publishing industry and for writing on, but also in a variety of specialty papers, cardboards, brown papers etc. In addition, various chemicals are produced as a byproduct of the pulp and paper industry. The use of paper for various purposes is an essential feature of the modern society. Therefore pulp and paper manufacturing is very important part of modern industry. Pulp and paper production is based on the use of bamboo as raw material, but also on the consumption of large-scale chemicals, like chlorine, sodium hydroxide, etc. Bamboo is a fast-growing, evergreen plant belonging to the botanical family of grasses. It has long been used as a construction material and as a source of implements, weapons, and ornaments in several global regions, particularly in Asia. In these regions, bamboo pulp has also been used to make high-grade papers for many years. Paper is one of the basic needs of modern life. It is a well-known product, which is the only media of communication through writing. It is then off rital medium for propagation of educations. It is used in every part of life, i.e., education, office, researches, engineering, art, book printing, magazine, newspaper, etc.Bamboo paper has practically the same quality as paper made from wood. Its brightness and optical properties remain stable, while those of paper made from wood may deteriorate over time. The morphological characteristics of bamboo fibres yield paper with a high tear index, similar to that of hardwood paper. The tensile stiffness is somewhat lower compared with softwood paper.
Plant capacity: Writing Paper:100MT/DayPlant & machinery: Rs 5457 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 8300 Lakhs
Return: 26.62%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Activated Carbon Powder from Jute Sticks - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Activated carbon is a non-graphitic form of carbon, which could be produced by activation of any carbonaceous material such as jute sticks, coconut shells, bamboo, wood chips, sawdust, coal, lignite, paddy husk etc. Without adding any additives, chemicals or bonding agents, our Charcoal Powder is completely natural and odor-free. By reducing waste discharged into the environment, or rather, by making full use of our resources, makes Charcoal Powder environmental friendly, and the world, a better place to live. The Charcoal Powder itself has numerous of pores, the Charcoal Powder pores can effectively to suck air and all kinds of floating material, to sulfide, hydride, methanol, benzene, phenol and other harmful chemical substances to absorption, decomposition odor and deodorization. The technology in making Jut Stick Charcoal Powder is available locally and skilled man power is also available in our country. Few Indian Major Players are as under • Grasim Industries Ltd. • Indo German Carbons Ltd. • Ion Exchange (India) Ltd. • Triton Laboratories Ltd.
Plant capacity: Activated Carbon Powder:50 MT/DayPlant & machinery: Rs 215 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 729 Lakhs
Return: 29.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Polyethylene Wax - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Waxes are among the oldest worked materials used by humans. Their value as versatile construction materials ("man's first plastic") was discovered very early. Today, waxes are used mostly as additives and active substances. The use of waxes is expected to increase in the future because of their generally favorable toxicological and ecological properties. The word "wax" usually refers to a variety of organic substances that are solid at ambient temperature but become free-flowing liquids at slightly higher temperatures. The chemical composition of waxes is complex, but normal alkanes are always present in high proportion and molecular weight profiles tend to be wide. The main commercial source of wax is crude oil but not all crude oil refiners produce wax. "Mineral" wax can also be produced from lignite. Plants, animals and even insects produce materials sold in commerce as "wax." Polyethylene is made in a polymerization reaction by building long molecular chains comprised of ethylene monomers, mostly by using catalysts. The type and nature of the catalysts are of great influence on the polymerization. As catalysts became more efficient, the polyethylene products became purer and more versatile and the production process became simplier and more efficient. Demand for polyethylene wax in India will go up in tune with the performance of the application sector. In view of the versatile applications of the product in diversified sector, the demand for PE wax is likely to go up steadily in the coming years. Considering the Indian demand and export opportunities, PE wax project can be favourably viewed in India for investment.
Plant capacity: 20 MT/ DayPlant & machinery: Rs 258 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 704 Lakhs
Return: 27.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Paint Industry (Decorative Paint & Acrylic Emulsion Paint)

Paint is any liquid, liquefiable, or mastic composition that, after application to a substrate in a thin layer, converts to a solid film. It is most commonly used to protect, color, or provide texture to objects. Paint can be made or purchased in many colors—and in many different types, such as watercolor, synthetic, etc. Paint is typically stored, sold, and applied as a liquid, but dries into a solid. The binder is the film-forming component of paint. It is the only component that must be present if the binder material is suitable for application. Many binders are too thick to be applied and must be thinned. The type of thinner varies with the binder. The thinner is also called the vehicle, because it makes it possible to transfer the binder to the surface with a brush, roller or sprayer. Components listed below are included optionally, depending on the desired properties of the cured film. Paint can be applied as a solid, a gaseous suspension (aerosol) or a liquid. Techniques vary depending on the practical or artistic results desired. The decorative coatings have various applications such as interior and exterior house paints, primers, sealers, varnishes and stains. Industrial paints and coatings are used by several industries, including machinery manufacturing, automotive, and consumer goods. Based on their formulation, industrial paints and coatings can be segmented into four categories: water-based, solvent-based, powder, and UV-based. Few Indian Major Players are as under • Akzo Nobel India Ltd. • Arofine Polymers Ltd. • Asian Paints Ltd. • Bangalore Paints Ltd. • Beepee Coatings Pvt. Ltd. • Berger Paints India Ltd. • Godavari Paints Pvt. Ltd. • Jenson & Nicholson (India) Ltd. • Kansai Nerolac Paints Ltd. • Pelican Paints Ltd. • Rajdoot Paints Ltd. • Rich Paints Ltd. • Shalimar Paints Ltd. • Special Paints Ltd. • Tamil Nadu Paints & Allied Products Ltd.
Plant capacity: Decorative Paint:800 Kgs/Day •Acrylic Emulsion Paint:800 Kgs/DayPlant & machinery: Rs 96 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 303 Lakhs
Return: 24.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Solar Power Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Renewable energy in India comes under the purview of the Ministry of New and Renewable Energy. India was the first country in the world to set up a ministry of non-conventional energy resources, in early 1980s. India's cumulative grid interactive or grid tied renewable energy capacity (excluding large hydro) has reached 33.8 GW, of which 66% comes from wind, while solar PV contributed nearly 4.59% along with biomass and small hydro power of the renewable energy installed capacity in India. Fossil fuel reserves are diminishing rapidly across the world, intensifying the stress on existing reserves day-by-day due to increased demand. Not only that, fossil fuels, presently contributing to 80% of world primary energy, are inflicting enormous impacts on environment. Climatic changes driven by human activities, in particular the production of greenhouse gas emissions, directly impact the environment. Energy sector has a key role in this regard since energy during its production, distribution and consumption is responsible for producing environmentally harmful substances. A secure and accessible supply of energy is thus very crucial for the sustainability of modern societies. There is an urgent need for a quicker switch over of energy systems from conventional to renewable that are sustainable and can meet the present and projected world energy demand. Solar power is one of the most promising renewable. It is reliable and less vulnerable to changes in seasonal weather patterns. Hydrogen, in the capacity of energy vector, is expected to be the optimum solution for intermittency and storage of energy produced by renewable. Thus, coupled with hydrogen as an energy carrier, solar energy has a large potential to become the fuel of the future. The present study is aimed to explore such potential for India in 2025. India is expected to have a high growth rate in energy demand over the coming years due to its huge population and rapid economic development. Few Indian Major Players are as under • Bhagyanagar India Ltd. • C P E C Ltd. • Central Electronics Ltd. • Environ Energy-Tech Services Ltd. • Epic Energy Ltd. • Gujarat Mineral Devp. Corpn. Ltd. • H B L Power Systems Ltd. • Harsha Engineers Ltd. • I T I Ltd. • Indian Metals & Carbide Ltd. • Indosolar Ltd. • J S W Green Energy Ltd. • Jai Bharat Gum & Chemicals Ltd. • Jain Irrigation Systems Ltd. • Moser Baer Solar Ltd. • N E P C India Ltd. • P L G Power Ltd. • Rajasthan Electronics & Instruments Ltd. • Reliance Industries Ltd. • Shurjo Energy Pvt. Ltd. • Star Delta Transformers Ltd. • Surana Solar Ltd. • Surana Telecom & Power Ltd. • Swelect Energy Systems Ltd. • Titan Energy Systems Ltd. • Ujaas Energy Ltd. • Usha (India) Ltd. • Websol Energy System Ltd. • X L Energy Ltd.
Plant capacity: Solar Power 10 MW:60,000 KWH/ DayPlant & machinery: Rs 5512 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 8447 Lakhs
Return: 5.68%Break even: 53.14%
Add to Inquiry Add to Inquiry Basket

LED Light Assembling - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A light emitting diode (LED) is a device which converts electrical energy in to light. LEDs are preferred light sources for short distance (local area) optical fiber network because they are inexpensive, robust and have long life (the long life of an LED is primarily due to its being a cold device, i.e. its operating temperature being much lower than that of, say, an incandescent lamp), can be modulated (i.e. switched on and off) at high speeds. A light-emitting diode (LED) is a two-lead semiconductor light source. It is a p–n junction diode, which emits light when activated. When a suitable voltage is applied to the leads, electrons are able to recombine with electron holes within the device, releasing energy in the form of photons. This effect is called electroluminescence, and the color of the light (corresponding to the energy of the photon) is determined by the energy band gap of the semiconductor. LEDs primarily offer advances in efficiency, controllability, and life span. The key strength of LED lighting is reduced power consumption. LED’s are available with at the most Lumen efficiency of 110 Lm/Watt compared to 65-80 Lm/Watt of CFL and FTL, 45 Lm/Watt of Mercury vapour and 75 Lm/Watt of metal halide or 94 Lm/Watt of Sodium Vapour. LED tube light could replace for traditional fluorescent tubes in the following places like hotels, hospitals, factories/offices, commercial complexes conference/ meeting rooms, schools/colleges/universities, residential/institution buildings. Thus, due to demand it is a good project for entrepreneurs to invest. Cost Estimation Capacity • LED Bulbs (2.5, 5, 7 & 9 Watt Size): 400 Nos/Day • LED Tubes (20 Watt Size): 40 Nos/Day Plant & Machinery : Rs 8 Lakhs Cost of Project: Rs 24 Lakhs Rate of Return: 26.30 % Break Even Point: 82%
Plant capacity: LED Bulbs (2.5, 5, 7 & 9 Watt Size):400 Nos/Day •LED Tubes (20 Watt Size):40 Nos/DayPlant & machinery: Rs 8 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 65 Lakhs
Return: 27.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

PVC Flex Banner (Frontlit, Backlit & Vinyl) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

PVC flex is made out of PVC and fabric raw material, specially designed for solvent printing industry. It is suitable for indoor and outdoor printing used in billboard, display, banners and exhibition booth decoration. PVC Flex is best to all Digital printer specially designed for Indian market. Due to stable chemical character and excellent ink absorbency, PVC Flex will bring wonderful digital printing images for large format picture advertisements. In virtue of the high classic quality and best sales service, nowadays PVC Flex is playing an important role in signage & Banner Advertising industry. Flex is a sheet of polythene widely used to deliver high quality digital print for outdoor hoardings and banner, mainly printed by large color plotters in CMYK mode. These prints are efficient, Low-cost and durable substitutes of hand painted hoarding and hand written banner. Laminated Backlit flex products are widely used for indoor and outdoor advertisement. Its surface has fine ink absorption which is compatible for all solvent-based printers such as Vutek, Nur, Scitex, etc. With special treatment, the products have a good property of anti-microbial and anti-aging. Backlit flex is a good translucent media material design for backlit displays which perform a high printing quality while printing a single strike image. Its certain finishing treatment makes ideal performance. This market is booming with 25-30% annual growth and is worth around Rs 500-600 crore. PVC is the third-most-used plastic or polymer petrochemical, after polyethylene and polypropylene. Depending on the manufacturing process or polymerisation, there are two types of PVC. Suspension is plain or rigid PVC, used for construction works, while emulsion or paste PVC is used in coating and blending applications. PVC flex is an end-product, used in tarpaulins, canvas and printing. Thus, due to demand it is a good project for entrepreneurs to invest.
Plant capacity: PVC Flex Banner (Frontlit/Backlit) 440 g/m2:20 MT/Day •PVC Flex Banner Vinyl 440 g/m2:5 MT/DayPlant & machinery: Rs 550 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 1196 Lakhs
Return: 27.00%Break even: 50.14%
Add to Inquiry Add to Inquiry Basket

Tannin Based Wood Adhesive - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Tannin is an excellent renewable resource for replacing petroleum-derived phenolic compounds. The major wood species from which it can be obtained are mimosa, quebracho and radiata pine. It is mainly concentrated in the inner layer of the bark and has been utilized in the adhesives industry in Africa, South America and Oceania. In particular, tannin-based wood adhesives have been used industrially for quite a long time in several countries for the manufacture of exterior wood panels. There are two different types of tannin: wattle tannin composed of resorcinol A-rings and pine tannin composed of phloroglucinol A-rings with catechol or pyrogallol B-rings. The free C6 or C8 sites on the A-ring react with formaldehyde, due to their strong nucleophilicity, to form the adhesive. The phenolic nuclei in tannins also react with formaldehyde. This high reactivity of tannins towards formaldehyde is the result of their A-ring phloroglucinolic or resorcinolic nuclei, which haved 10- to 50-times higher rate of reaction than the reaction of phenol with formaldehyde. Because of this characteristic, less free formaldehyde emission occurs than from other wood adhesives such as phenol– formaldehyde, urea–formaldehyde, etc. Tannins are an important ingredient in the process of tanning leather. Tanbark from oak, mimosa, chestnut and quebracho tree has traditionally been the primary source of tannery tannin, though inorganic tanning agents are also in use today and account for 90% of the world's leather production. Therefore, it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Advanced Adhesives Ltd. • Arofine Polymers Ltd. • C I C O Technologies Ltd. • Ciba India Ltd. • F C L Technologies & Products Ltd. • Feroke Boards Ltd. • Henkel C A C Pvt. Ltd. • India Tyre & Rubber Co. (India) Ltd. • Jesons Industries Ltd. • Jyoti Resins & Adhesives Ltd. • Kitply Industries Ltd. • Mica House Ltd. • N G Adhesive Inds. Pvt. Ltd. • Nikhil Adhesives Ltd. • Pidilite Industries Ltd. • Resinova Chemie Ltd. • Uflex Ltd.
Plant capacity: Tannin Based Wood: 8 MT/Day8 MT/DayPlant & machinery: Rs 72 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 517 Lakhs
Return: 27.77%Break even: 46.58%
Add to Inquiry Add to Inquiry Basket

ZARDA - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Zarda is a mixture of tobacco, lime, spices, and occasionally, silver flakes is also added to pan and chewed. The tobacco industry is one of the most profitable industries in the world. Tobacco companies use their enormous wealth and influence both locally and globally to market their deadly products. Even as advocacy groups and policy makers work to combat the tobacco industry’s influence, new and manipulative tactics are used by tobacco companies and their allies to circumvent tobacco control efforts. It is important for tobacco control advocates to know which companies are present in their country, how and where they operate, the types and quantity of products sold, and marketing tactics used to sell tobacco products. By being informed about all aspects of the tobacco industry within a country, advocates are better equipped to fight for effective tobacco control policies. Smokeless tobacco is consumed without burning the product, and can be used orally or nasally. Oral smokeless tobacco products are placed in the mouth, cheek or lip and sucked (dipped) or chewed. Tobacco pastes or powders are used in a similar manner and applied to the gums or teeth. Fine tobacco mixtures are usually inhaled and absorbed in the nasal passages. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Dharampal Premchand Ltd. • Prabhat Zarda Factory Ltd.
Plant capacity: Zarda 25 gms & 50 gms Size Pack 500 Kgs/DayPlant & machinery: Rs 17 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 198 Lakhs
Return: 31.00%Break even: 25.20%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 19 of 254 | Total 2538 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 .... 253 254   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top