Google Search

Search

Already a Member ?

Best Business Opportunities in Telangana- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Telangana is a state in the Southern region of India. It has an area of 114,840 km2 and is the twelfth largest state in India. Most of it was part of the princely state of Hyderabad, ruled by the Nizam of Hyderabad during the British Raj, joining the Union of India in 1948. Telangana was separated from Andhra Pradesh as a new 29th state of India, with the city of Hyderabad as its capital. Hyderabad will continue to serve as the joint capital city for Andhra Pradesh and Telangana for a period of not more than ten years. Telangana is situated on the Deccan Plateau, in the central stretch of the eastern seaboard of the Indian Peninsula. It covers 114,800 square kilometers (44,300 sq. mi). The region is drained by two major rivers, with about 79% of the Godavari River catchment area and about 69% of the Krishna River catchment area, but most of the land is arid. Telangana region has rich natural resources. About 45 per cent of the forest area in Andhra Pradesh state is in Telangana region while 20 per cent of the country's coal deposits in the country are also found here. Telangana is also rich in limestone deposits that cater to cement factories. Telangana has other mineral resources like bauxite and mica. Perennial rivers Godavari and Krishna enter Andhra Pradesh in Telangana before flowing down through other regions and ending up in the Bay of Bengal. Telangana region is sitting on potential oil and natural gas reserves, according to a report by Director General of Hydrocarbons (DGH). Telangana has a significant amount of Software export in India. While majority of the Industry is concentrated over Hyderabad, the other cities are also becoming significant IT destinations in the state. Hyderabad's IT exports exceeded $7 billion in 2014.There have been extensive investments in digital infrastructure.

 

AGRICULTURE

Rice is the major food crop and staple food of the state. Other important crops are tobacco, mango, cotton and sugar cane. Agriculture has been the chief source of income for the state's economy. Important rivers of India are the Godavari, Krishna flow through the state, providing irrigation. Telangana agriculture department separated from Andhra Pradesh as part of Andhra Pradesh bifurcation It aims promote agricultural trade and to boost up the agricultural production and productivity in the Telangana.

 

TOURISM IN TELANGANA

Telangana State Tourism Development Corporation (TSTDC) is a state government agency which promotes Tourism in Telangana. Telangana has a variety of tourist attractions including historical places, monuments, forts, water falls, forests and temples. Charminar, Golconda Fort, QutbShahi Tombs, Chowmahalla Palace, Falaknuma Palace and Bhongir Fort, are some of the monuments in the state. The Charminar, built in 1591 CE, is a monument and mosque located in Hyderabad, Telangana, India.

 

DEMOGRAPHIC PROFILE

Telangana with a population of 351.9 lakhs (according to the 2011 census) accounts for about 3.6% percent of the total population of India. Out of this, 177.0 lakhs (50.2%) are males and 174.9 lakhs (49.8%) are females. The sex ratio of the state is 988 as against the national figure of 943. The population density in the state is 307 persons/Sq.Km. In 2012-13, the services sector at Rs.  1, 14,046 crores, contributed 58.1% to the GSDP (at constant prices). It is followed by industry sector, contributing 27.9% (Rs. 54,687 crores) and the agriculture sector’s contribution of 14% (Rs. 27,450 crores). The services sector had fastest growth  of  11.31%  followed  by  industry  sector  (10.04%)  and  agriculture  sector  (6.89%) between 2004-05 and 2012-13.

The Telangana government has proposed to add 230 crore plants in the next three years under a flagship programme which envisages boosting of tree cover in the state by nearly 8%.

 

FOOD AND INDUSTRIAL PROCESSING SECTOR

The Telangana government plans to put greater emphasis on value-addition in the farm sector in its industrial policy. The departments of industry and commerce, agriculture and agro marketing would coordinate together to achieve value maximization for farmers. The government is also keen on encouraging e-marketing activities, which involves networking all agriculture mandis in the state so that farmers get access to prevailing prices across important markets and thereby helping them unlock the right value for their produce. The state in collaboration with research institutes in the country would facilitate an ideal adoption of latest practices ranging from seed technology and farm machinery to improve farm productivity. the state government is also considering specific projects such as setting up a pharmaceutical city near Hyderabad and a cotton hub in Warangal district, the largest producer of long-staple cotton. The Telangana government has begun a survey to identify land that can be offered to new industries in the state. The Telangana government is set to announce its new industrial policy under which scheduled castes and scheduled tribe entrepreneurs would be specially encouraged.

Telangana Government is mulling to set up a 'Pharma City' near the state capital in about 8,000 acres. The City will include industries as well as residential colony, and a power plant with 500 MW capacity will be set up adjacent to the pharma city to provide captive, dedicated and uninterrupted power supply to the industry. The pharma city is expected to accommodate about five lakh employees besides their families in the residential colony touching about twenty lakh over a period. Delegation of Drugs Manufacturers' Association that an international consultancy organisation with expertise in developing in the information technology and pharmaceuticals manufacturing sectors may become backbone of Telangana economy, leaving power production, ports and oil and natural gas to play a pivotal role in driving prosperity in the residuary state. Industrial estates should be contacted to design the pharma city. Telangana's per capita income of Rs 24,409 in 2004-05 has phenomenally grown to a whopping Rs 83,020. While Hyderabad has less number of households using open toilets at 0.9 per cent, Mahabubnagar is at 71.1 per cent. The land-locked state is expected to have nearly Rs 4,000 crore surplus budget, but lingering power deficit may force the new government to spend more on the power purchase. Telangana, spread in 1,14,840 square kilometres, has 66.46 per cent literacy rate with a population of 3.52 crore.

 

ECONOMY OF TELAGANA

The Economy of Telangana is mainly driven by agriculture. Two important rivers of India, the Godavari and Krishna, flow through the state, providing irrigation. Rice, cotton, mango and tobacco are the local crops. Recently, crops used for vegetable oil production such as sunflower and peanuts have gained favour. There are many multi-state irrigation projects in development, including Godavari River Basin Irrigation Projects and NagarjunaSagar Dam, the world's highest masonry dam. Telangana is a mineral-rich state, with coal reserves at SingaerniColleries. The population of Telangana is over 35 million now – much more than 30 million for the whole of Andhra Pradesh, including Telangana, at the time of its formation in 1956. The demands on governance have multiplied over this half a century. Apart from commitment to the development of the region, a smaller state being more easily accessible to the common people can intelligently and speedily grapple with their problems.

 

INDUSTRIAL POLICY FRAMEWORK FOR STATE OF TELANGANA

Industrialization will be the key strategy followed for economic growth and development for Telangana, the 29th state of the country. People of the new state have very high expectations from the Telangana State Government for creating jobs for the youth, promote development of backward areas, maximize growth opportunities by optimum utilization of the available resources, harness the talents and skills of the people etc. The Government of Telangana State realizes that industrial development requires large-scale private sector participation, with the government playing the role of a facilitator and a catalyst. The government is committed to provide a graft-free, hassle-free environment in which the entrepreneurial spirit of local, domestic and international investors will thrive to take up their industrial units in the state of Telangana as the preferred investment destination.

The new Telangana State Industrial Policy will be rooted in certain core values, as follows:

 

                • The Government regulatory framework shall facilitate industrial growth

                • Entrepreneurs will thrive in a peaceful, secure and progressive business regulatory                                        environment

                • Industrial development will lead to massive creation of jobs benefitting local youth

                • Industrialization shall be inclusive and facilitate social equality

 

The new Telangana State Industrial Policy will strive to provide a framework which will not only stabilize and make existing industries more competitive, but also attract and realize new international and national investments in the industrial sector. It is expected that the most significant outcome of this approach will be the production of high quality goods at the most competitive price, which establishes “Made in Telangana-Made in India” as a brand with high global recognition. The Industrial Policy Framework has the following mandate for departments that have any responsibility in the industrialization of the State—Minimum Inspection and Maximum Facilitation.

The Government of Telangana State is determined to create an ecosystem in which the ease of doing business in the state matches and even exceeds the best global standards. Telangana State Government is aware that offering a hassle-free system is considered to be of the highest priority by the industrialists, and accordingly the government will implement a very effective industrial clearance system that will go beyond the traditional single window system.

 

THRUST AREAS AND CORE SECTORS

•             Life Sciences including, bulk drugs, formulations, vaccines, nutraceuticals, biological,   incubation centers, R&D facilities and medical equipment.

•             IT Hardware including bio-medical devices, electronics, cellular communications.

•             Precision engineering, including aviation, aerospace, defence.

•             Food processing and nutrition products including dairy, poultry, meat and fisheries.

•             Automobiles, Transport Vehicles, Auto-components, Tractors and Farm Equipment.

•             Textiles and Apparel, Leather and leather value added products like shoes, purses, bags,         artificial   material infused and coated textiles, paper and paper products.

•             Plastics and Polymers, Chemicals and Petro-chemical, glass and ceramics.

•             FMCG and Domestic Appliances.

•             Engineering and Capital Goods, including castings, foundry and Ferro-alloys and other    metallurgical industries.

•             Waste Management and Green Technologies.

•             Renewable Energy and Solar Parks.

•             Mineral-based and wood-based Industries.

•             Transportation/Logistic Hub/Inland Port/Container Depot.

 

Telangana has emerged as a State that provides that right climate for the growth of IT business and is now one of the most preferred destinations in the Country.

The State of Telangana is poised towards creating a benchmark in Information & Communication Technology (ICT) endowed with a high quality state-of-the-art physical & communication infrastructure of international standards, harnessed human resources, and proactive business friendly policies of the Government.

It is estimated that about 20 lakh acres of land is available in the state that has been identified as unfit for cultivation in Telangana. Based on a detailed survey of these land parcels and identification of those parcels that are fit for industrial use, an industrial land bank for the State of Telangana will be developed.

The development of industrial and related infrastructure will be the responsibility of the Telangana State Industrial Infrastructure Corporation (TSIIC). The financial base of the TSIIC will be strengthened and it will be made to function as an effective organization. All lands in the State identified as fit for industrial use will be transferred to the TSIIC.

To support industrialization, the Government of Telangana will earmark 10% of water from all existing and new irrigation sources for industrial use. Water pipelines will be laid as a part of infrastructure creation for each industrial park by TSIIC. The Government of Telangana State recognizes that quality power and uninterrupted power supply are keys to the growth of the industrial sector. The State has a clear short-, medium-, and long-term plans to first overcome the power shortage and eventually become a power surplus state. Accordingly, uninterrupted power supply will be arranged in each industrial park. The Telangana State Government will encourage usage of non-conventional energy for industrial purposes.

The Telangana State Government is committed to encourage the process of industrialization by making various kinds of incentives available to the entrepreneurs. The Telangana State Government also assures an entrepreneur-friendly and graft-free regime of disbursing the incentives. The Telangana State Government will consider providing incentives to the entrepreneurs in the following areas-

•             Stamp duty reimbursement

•             Land conversion cost

•             Investment subsidy

•             VAT reimbursement

•             Interest subsidy

•             Clean production measures

•             Reimbursement of infrastructure development costs etc.

A sound industrial policy has to ensure that the state taxation structure is conducive to industrial growth and state financial resource augmentation. Distortions in the tax structure leads to evasion of taxes and clandestine transport of industrial inputs and outputs to neighbouring states, which may have advantageous tax rates. The presence of important national and state highways, coupled with the availability of resources and opportunities, provides a great potential for development of industrial corridors in the state along these roadways.

The Industrial Corridors that will be developed initially will be:

 

1) Hyderabad-Warangal Industrial Corridor

2) Hyderabad-Nagpur Industrial Corridor

3) Hyderabad-Bengaluru Industrial Corridor

The new Industrial Policy brought out by the Government of Telangana promises to revolutionise the way industrial sector has been viewed by successive governments in this country. A day is not far when the new Industrial Policy of Telangana will shine as an exemplar among the best in the world.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 197 of 285 | Total 2850 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 197 284 285   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Surgical & N95 Masks

A surgical mask, also known as a procedure mask, medical mask or simply as a face mask, is intended to be worn by health professionals during surgery and during nursing to catch the bacteria shed in liquid droplets and aerosols from the wearer's mouth and nose. They are not designed to protect the wearer from inhaling airborne bacteria or virus particles and are less effective than respirators, such as N95 or FFP masks, which provide better protection due to their material, shape and tight seal. Surgical masks are designed to keep operating rooms sterile, preventing germs from the mouth and nose of a wearer from contaminating a patient during surgery. Although they have seen a rise in popularity among consumers during outbreaks such as the coronavirus, surgical masks are not designed to filter out viruses, which are smaller than germs. The India surgical mask market accounted for $58 million in 2017, and is projected to reach $95 million by 2025, registering a CAGR of 6.1% from 2018 to 2025. Surgical masks are made of natural fiber, such as cotton or disposable linen or synthetic materials, such as polypropylene. They are made of different layers including a hydrophobic outer layer, a middle filtering layer, and an inner hydrophilic layer to absorb the fluid and moisture. They are used as a barrier to avoid cross contamination by microorganisms and are used during surgical procedures. The surgical mask is used by surgeons during procedures and other medical professionals while interacting with the patients to avoid cross contamination of microorganisms. The India surgical mask market is driven by various factors, such as increase in elderly population, increase in adoption of surgical mask in the general population, and surge in prevalence of contagious and chronic diseases such as tuberculosis and asthma. Furthermore, rise in the number of medical device manufacturing companies is also anticipated to supplement the growth of the surgical masks industry. The demand within the global market for surgical mask has been rising on account of advancements in the field of medical surgery and diagnosis. Surgical masks are meant to protect doctors and surgeons from harmful infections and pathogens that may get suspended in the surgery room. Furthermore, the patient who is under treatment also needs to be protected from infectious agents that may be discharged by others in the surgery rooms. Hence, the global market for surgical mask is expected to expand at a stellar pace in the years to follow. There have been multiple attempts at manufacturing improved surgical masks, and this has given an impetus to market growth. The world is currently experiencing the pandemic of an infectious disease called COVID-19. This infection leads to multiple organ failure, acute & severe respiratory disorders, pneumonia, and even death in severe cases. Hence, surge in number of people with coronavirus infections is anticipated to drive the global surgical face masks market. According to the World Health Organization, globally, 823,626 confirmed and 72,736 new cases of COVID-19. The effectiveness of surgical face mask in blocking the transmission of SARS is 68%. Therefore, it is widely used by medical workers as part of droplet transmission precaution when caring for patients with respiratory infections. Hence, increase in use of surgical face masks is projected to fuel the growth of the global surgical face masks market. Furthermore, vulnerable populations, such as older adults with chronic conditions, are at high risk of infectious diseases, including COVID-19. Hence, the use of face mask to prevent infections by the geriatric population is anticipated to drive the global market. Few Indian major players are as under 3M India Ltd. Health Insurance T P A Ltd. GoodKimberly-Clark India Pvt. Ltd. Mediklin Healthcare Ltd. Surgeine Healthcare (India) Pvt. Ltd.
Plant capacity: Surgical Face Masks (each Pkts = 25 Pcs.): 1,694 Pkts / day N95 Face Masks (each Pkts = 5 Pcs.): 8,467 Pkts / dayPlant & machinery: Rs 350 lakhs
Working capital: -T.C.I: Cost of Project : Rs 865 lakhs
Return: 29.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

Biodegradable Plastic Bags from Corn & Cassava Starch Granules

Biodegradable plastic is plastic that decomposes naturally in the environment. This is achieved when microorganisms in the environment metabolize and break down the structure of biodegradable plastic. The end result is one which is less harmful to the environment than traditional plastics. Corn starch is blended with suitable plasticizer, lubricants and other chemical additives and processed in a twin screw extruder to produce thermoplastic starch pellets or granules. These pellets are further processed to manufacture cast or blown films. If disposed of correctly, packaging material made from cornstarch will break down into carbon dioxide and water within several months. However, if the material is not disposed of correctly cornstarch-based material will take longer to decompose, especially if there is no oxygen or light available. The global biodegradable plastic packaging market was valued at USD 4.65 billion in 2019, and is expected to reach a market value of USD 12.06 billion by 2025, registering a CAGR of 17.04% during the forecast period of 2020-2025.Growing environmental concerns regarding plastic usage that consists of toxic pollutants which are harming plants, animals, and people are driving the use of biodegradable plastic. Stringent regulations by various government and federal agencies with an objective to reduce plastic waste and promote biodegradable plastics usage in packaging is boosting the demand of this market. Regulations related to green packaging is increasing and various FMCG companies are required to adopt biodegradable packaging to comply with the standards which in turn is propelling the growth of this market. Biodegradable plastic is plastic that decomposes naturally in the environment by the action of microorganisms in the environment that metabolize and break down the structure of biodegradable plastic. The end result is one which is relatively less harmful to the environment than the traditional plastics. Non-decomposable plastics are a global environmental problem. Governments around the world are dealing with this problem by banning single-use plastics and promoting biodegradable plastics. Moreover, consumers are willing to pay more for biodegradable plastics owing to their eco-friendly nature. Moreover increasing use of biodegradable plastics in packaging and agriculture sectors is projected to drive the global biodegradable plastics market. Based on end-use industry, the biodegradable plastics market has been segmented into packaging & bags, consumer goods, agriculture & horticulture, textile, and others (automotive, medical, and building & construction). Packaging & bags is the largest and the fastest-growing end-use industry of biodegradable plastics. The new applications of biodegradable plastics in the packaging industry are diaper banking, adult incontinence products, and landfill covers. With several innovative products coming up, the use of biodegradable plastics in packaging is expected to increase further.
Plant capacity: Biodegradable Plastic Bags from Corn Starch Granules (Per Bag 25 gms Size): 6 MT per/ day Biodegradable Plastic Bags from Cassava Starch Granules (Per Bag 25 gms Size) : 6 MT per/ day Plant & machinery: Rs 77 lakhs
Working capital: -T.C.I: Cost of Project: Rs 485 lakhs
Return: 31.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

Rice Milling Unit

Rice is one of the leading food crops of the world, and is produced in all the continents. Rice was an important food even before the dawn of written history. One centre of origin of cultivated rice is thought to have been in South East Asia. That is, in eastern India. Indo-China and Southern China, Another probably was in Africa. Rice is one of the most important food grains. It is used in almost all homes as eatables. It has good filling capacity as a food grains. Agriculture is the main occupation of the rural population in West Bengal. Among various crops, rice is the principal food crop of the State. West Bengal is the largest producer of rice in the country with an annual output of around 150 Lakh Tonnes. The rice is obtained after hulling/DE husking of paddy in a rice mill. The paddy comprises of 65% milled rice, 24%husk, 5% bran layers. Paddy in its raw form cannot be consumed by human beings. It needs to be suitably processed for obtaining rice. Rice milling is the process which helps in removal of hulls and bran from paddy grains to produce polishedrice. Rice milling is the process of removal of husk and bran layer from the paddy to produce whole white rice kernel. The rice should be free from impurities and should contain minimum number of broken grains. Food Corporation of India (FCI) is the main purchaser of rice. About 20 to 25% of total production of rice isprocured by FCI for at Minimum Support Price for Public Distribution System. The production in India (about 40 million tonnes) forms about 40 percent of total production of all food grains. There are a number of big rice plates in India apart from about 60,000 small rice mills of less than 2 tonnes per hour capacity. However, there is still a scope for setting up mini rice plant in various parts of India with a view to meet the local demand and providing employment to local people. India has about 82000 registered single huller units, 2600 double hulling unit, 5000 units of disc sheller cum polisher and 10000 units of rubber roll sheller. Theaverage capacity of these units ranges between 2 tonnes per hour to 10 tonnes perhour. In India, rice milling business has a turnover of more than Rs.25, 500croreper annum. Among other states, Punjab, Haryana, Andhra Pradesh etc. also produce large quantities of rice. Rice provides about 20 percent of the global average calorie intake. Although produced and consumed across the five major continents, the crop is concentrated overwhelmingly in Asia, which accounts for some 90 percent of global production and consumption, with China and India alone responsible for about half of the world total. Rice is mostly consumed in the country where it is produced, so trade in rice is small, both in absolute terms and as a proportion ofglobal production. Since the early 1990s, the volumes of rice exchanged internationally have risen quantity-wise, but also in relation to production, resulting in a expanding and strengthening of the International rice market. The India rice milling market is expected to value an estimated USD 392.6 million by the end of 2022 and witness a steady CAGR of 3.51% during the forecast period of 2016 - 2022. The high production of rice in this region and increasing demand for good quality rice are some key drivers for the growth of the rice milling market in India. India being one of the world’s largest producers of rice, possesses a significant rice milling market. A global and local increase in population has led to a higher production of rice in the country to meet both domestic and export demands. Few Indian major players are as under Best Foods Ltd. Bajaj Basmati Pvt. Ltd. Baba Agro Food Ltd. Amira Pure Foods Pvt. Ltd. Alia Rice Mill Pvt. Ltd. Almaha Foods Intl. Pvt. Ltd. Chennai Gate Rice Inds. Pvt. Ltd.
Plant capacity: Milled Rice (1401 Type) : 65 MT / day Milled Rice (1509 Type): 65 MT / day Rice Bran: 10 MT / day Rice Husk : 48 MT / dayPlant & machinery: Rs 218 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1038 lakhs
Return: 30.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Disposable Surgical Masks

A surgical mask, also known as a procedure mask, is intended to be worn by health professionals during surgery and during nursing to catch the bacteria shed in liquid droplets and aerosols from the wearer's mouth and nose. They are not designed to protect the wearer from inhaling airborne bacteria or virus particles and are less effective than respirators, such as N95 or NIOSH masks which provide better protection due to their material, shape and tight seal. Surgical masks are popularly worn by the general public in East Asian countries to reduce the chance of spreading airborne diseases. Theface mask having a body portion adapted to cover the nose and mouth and having means to secure said body portion over the nose and mouth, said body portion comprising a filtration medium comprising a nonwoven fabric formed of continuous thermoplastic filaments having a length of at least 2.5 inches and a diameter of from 14 to 20 microns, the filaments lying generally in planes perpendicular to the direction of the flow of air through the mask, the filtration fabric having a weight of from 47 to 61 gsm and having a thickness of from 0.01 to 0.02 inches and a void volume of about 85 percent and being substantially free of binder, and a lightweight porous nonwoven facing fabric on each major side of said filtration medium. The India surgical mask market is driven by various factors, such as increase in elderly population, increase in adoption of surgical mask in the general population, and surge in prevalence of contagious and chronic diseases such as tuberculosis and asthma. Furthermore, rise in the number of medical device manufacturing companies is also anticipated to supplement the growth of the surgical masks industry. However, concerns with respect to disposal of non-woven disposables along with rise in prominence of less invasive surgeries are the factors anticipated to restrain the growth of the India surgical mask market. The global sheet face masks market is expected to reach US$336.7 mn by the end of 2024. The market is projected at a CAGR of 8.7% from 2016 to 2024 and was evaluated at US$160.4 mn in 2015. The global sheet face masks market has been witnessing a tremendous growth due to high adoption of sheet face masks in the personal care industry. The exhaustive and extensive research and development in making innovative sheet face masks is also expected to drive the growth of the overall market. Several manufacturing companies are focusing on developing products to cater to the needs of consumers, which is also expected to have a positive impact on the global market. The demand for sheet face masks is also expected to rise due to the growing need for these products amongst the elderly population. These masks promise to repair several signs of aging such as pores, wrinkles, dry lines, sagging skin, and blemishes amongst others. According to WHO, currently, more than 4.2 million people worldwide are infected with Corona (COVID-19). In the context of the novel coronavirus (2019-nCoV) outbreak, the World Health Organization recommends the use of masks in home and health care settings. This in turn increases demand for surgical marks. Increase in elderly population, increase in adoption of surgical mask in the general population and surge in prevalence of contagious and chronic diseases such as tuberculosis and asthma along with the rise in the number of medical device manufacturing companies and rapid developments in nonwovens production technology is poised to contribute in the growth of the surgical mask market. Increasing focus toward preventing hospital-acquired infections and improvement in healthcare infrastructure & service are also some of the factors that are contributing in the growth of the surgical mask market. Few Indian major players are as under Tex Healthcare (India) Pvt. Ltd Medicare Hygiene Limited, Cartel Healthcare Pvt. Ltd., Mediblue Health Care Private Limited., Plasti Surge Industries Pvt. Ltd., Medline Industries Inc., Premium Health Care Disposables Private Limited, Kwalitex Healthcare Private Limited.
Plant capacity: Disposable Surgical Masks: 52,800 Pcs. / dayPlant & machinery: Rs 74 lakhs
Working capital: -T.C.I: Cost of Project: Rs 377 lakhs
Return: 29.00%Break even: 31.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Anodizing Unit

Aluminium and most aluminium alloys have high corrosion resistance because of protective oxide films thatformonthesurface when the metal is exposed to air. Anodizing of aluminium is the process by which the thick layer of aluminium oxide is made on the upper surface of the aluminium articles. The oxide film, is formed automatically about 0.1-0.4 x 106 inches or 0.25 1 x 10-2microns. Micron is a unit used to measure the film thickened i.e. very small thicknesses. Anodic oxidation or anodizing is an electrolytic process for thickening this naturally occurring film several hundred times or more. This thicker oxide film has properties that open new fields of application to aluminium and hence its suitability in many existing uses. The anodic film is chemically stable and abrasion resistance. It also has a high dielectric strength. Valuable in some application where aluminium used as an electrical conduct. The film may be retain high reflectivity, while its microcell structure enables it to absorb dyes to give a wide range of decorative effects. It also forms an excellent key for plain coatings. Anodizing is accomplished by immersing the aluminium into an acid electrolyte bath and passing an electric current through the medium. A cathode is mounted to the inside of the anodizing tank; the aluminium acts as an anode, so that oxygen ions are released from the electrolyte to combine with the aluminium atoms at the surface of the part being anodized. Anodizing is, therefore, a matter of highly controlled oxidation the enhancement of a naturally occurring phenomenon. The global anodized aluminium components for beauty packaging market is estimated to reach US$ 5,450.6 million by 2026 from US$ 3,676.6 million in 2018, and is projected to exhibit a CAGR of 5.8% over the forecast period (2019–2026). Key drivers such as shifting consumer preference towards sustainable, eco-friendly & aesthetically appealing packaging material are expected to positively impact demand for anodized aluminium components during the forecast period. However, high cost of aluminium compared to other materials such as tinplate, steel is estimated to be a major factor restraining growth of the market in the near future. Anodized aluminium is used in commercial and consumer applications in industries such as the transportation and construction. It is also used in home decors and electrical appliances. In addition, it is employed in satellites to provide protection from debris. Therefore, the global anodized aluminium market is likely to experience a promising growth. Aluminium is used in a huge variety of products including cans, foils, kitchen utensils, window frames, beer kegs and aero plane parts. This is because of its particular properties. It has low density, is non-toxic, has a high thermal conductivity, has excellent corrosion resistance and can be easily cast, machined and formed. It is also non-magnetic and non-sparking. It is the second most malleable metal and the sixth most ductile. Due to the fact that consistent growth of Indian economy at a rate of 8%, the demand for metals, used for various sectors, is also on the higher side. As a result, the Indian Aluminium Industry is also growing consistently as in the year 2009 the aluminium industry in India saw a growth of about 9%. Indian Aluminium Industry is a highly concentrated industry with the top 5 companies constituting the majority of the country's production.With the growing demand of Aluminium, the industry is also growing at an enviable pace. In fact, Aluminium production in India is currently outpacing the demand. Although India's per capita consumption of Aluminium stands too low (under 1 kg) as compared to the per capita consumptions of other countries like US & Europe (range from 25 to 30 kgs), Japan (15 kgs), Taiwan (10 kgs) and China (3 kgs), the demand is growing gradually. In India, the industries that require Aluminium Reserves most include power (44%), consumer durables, transportation (10-12%), construction (17%) and packaging, etc. The global requirement is estimated at around 7.4 million tons, against the consumption in India as only around 110,000 tons. India's share in the global downstream sector is low as compared to other developed countries.India has nearly 10% of the world's bauxite reserves and a growing aluminium sector that leverages this. Demand in the domestic market is expected to grow by 8-10; India is expected to have an installed aluminium capacity of 1.7 to 2 million tons per annum by 2020. Few Indian major players are as under Adishakti Alloys Pvt. Ltd. Alexcon Extrusions Ltd. Alom Extrusions Ltd. Alufit (India) Pvt. Ltd. Alumayer Systems Pvt. Ltd. Aluminium Profiles Ltd. Autoneum India Pvt. Ltd Bhoruka Extrusions Pvt. Ltd.
Plant capacity: Aluminium Anodized Articles: 10 MT / dayPlant & machinery: Rs 66 lakhs
Working capital: -T.C.I: Cost of Project: Rs 257 lakhs
Return: 26.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Workshop for Motors of Low Voltage (Up-To 1000V) and Distribution Transformers (Maintenance, overhauls and repairs)

Maintenance of electrical equipment and the maintenance function in general, are key subjects today for managers of plants and facilities. One important reason for this interest is there are profound changes taking place in the area of maintenance and reliability management. Basically, sweeping changes in management and organizational structure are redefining how work gets done. The maintenance function was seen as a non-core service organization that did not contribute to competitiveness. Benchmarks for maintenance were isolated measurements of tasks - that is, task orientation rather than business goal orientation. New performance criteria for measuring maintenance will be focused on optimizing asset utilization, not maximizing asset utilization. Qualification and certification of electrical maintenance personnel are other factors that will become increasingly important. A number of electrical industry organizations got together recently and created a certification program for people involved in the installation and maintenance of instrumentation and control systems. To provide quality, fast and competitive service for all units, including smaller ones of 100 HP or less, we have dedicated teams of specialists who are inspired by Lean best practices. Indeed, the Multi-Tech Workshop works completely independently from other Services departments to carry out the operations necessary for the refurbishment of small electric motors. The growing requirement to improve and maintain the reliability of the electrical distribution equipment at office spaces, manufacturing facilities, and industrial facilities is propelling the demand for the electrical distribution services, globally. The electrical services market’s growth can also be attributed to the increasing focus on repair and maintenance of existing electrical equipment and fixtures across multiple industries. Fulfilling crucial parameters is critical to ensure the effective scheduling of electrical distribution equipment to avoid the operational downtimes. Based on power rating, the distribution transformer market has been segmented into power ratings ranging up to 500 kVA, 501 kV–2,500 kVA, 2,501 kVA–10,000 kVA, and above 10,000 kVA. The distribution transformers ranging from 2,501 kVA–10,000 kVA are widely used in industrial and commercial sectors due to high power consumption as compared to residential power consumption. The global distribution transformer market is anticipated to grow at a CAGR of 7.88% between 2020 and 2028, and is anticipated to generate revenue of $32.58 billion by 2028. The service transformers or distribution transformers (DTs) deliver the final voltage alteration in the electric power distribution arrangement. DTs are used to step down the voltage used in the distribution lines (usually up to 36 kV), to the level used by the customer (usually 250 up to 435 V). The oil-filled segment is expected to be the largest market for distribution transformer, as it is more efficient, having longer service life and features more reliable overload capabilities. In developing countries, oil-filled distribution transformers account for around 90% of the total distribution transformer units and 80% in developed countries. Few major players are as under Apex Electricals Ltd Current Electricals Ltd G E Power India Ltd. Hammond Power Solutions Pvt. Ltd. G M R Warora Energy Ltd. Diamond Power Infrastructure Ltd.
Plant capacity: Workshop for Motors & Distribution Transformer of Low Voltage (up to 1000V ) Maintenance, Overhauls and RepairsPlant & machinery: Rs 30 lakhs
Working capital: -T.C.I: Cost of Project: Rs 85 lakhs
Return: 27.00%Break even: 71.00%
Add to Inquiry Add to Inquiry Basket

Workshop for Motors of Low Voltage (Up-To 1000V) and Distribution Transformers (Maintenance, overhauls and repairs)

Maintenance of electrical equipment and the maintenance function in general, are key subjects today for managers of plants and facilities. One important reason for this interest is there are profound changes taking place in the area of maintenance and reliability management. Basically, sweeping changes in management and organizational structure are redefining how work gets done. The maintenance function was seen as a non-core service organization that did not contribute to competitiveness. Benchmarks for maintenance were isolated measurements of tasks - that is, task orientation rather than business goal orientation. New performance criteria for measuring maintenance will be focused on optimizing asset utilization, not maximizing asset utilization. Qualification and certification of electrical maintenance personnel are other factors that will become increasingly important. A number of electrical industry organizations got together recently and created a certification program for people involved in the installation and maintenance of instrumentation and control systems. To provide quality, fast and competitive service for all units, including smaller ones of 100 HP or less, we have dedicated teams of specialists who are inspired by Lean best practices. Indeed, the Multi-Tech Workshop works completely independently from other Services departments to carry out the operations necessary for the refurbishment of small electric motors. The growing requirement to improve and maintain the reliability of the electrical distribution equipment at office spaces, manufacturing facilities, and industrial facilities is propelling the demand for the electrical distribution services, globally. The electrical services market’s growth can also be attributed to the increasing focus on repair and maintenance of existing electrical equipment and fixtures across multiple industries. Fulfilling crucial parameters is critical to ensure the effective scheduling of electrical distribution equipment to avoid the operational downtimes. Based on power rating, the distribution transformer market has been segmented into power ratings ranging up to 500 kVA, 501 kV–2,500 kVA, 2,501 kVA–10,000 kVA, and above 10,000 kVA. The distribution transformers ranging from 2,501 kVA–10,000 kVA are widely used in industrial and commercial sectors due to high power consumption as compared to residential power consumption. The global distribution transformer market is anticipated to grow at a CAGR of 7.88% between 2020 and 2028, and is anticipated to generate revenue of $32.58 billion by 2028. The service transformers or distribution transformers (DTs) deliver the final voltage alteration in the electric power distribution arrangement. DTs are used to step down the voltage used in the distribution lines (usually up to 36 kV), to the level used by the customer (usually 250 up to 435 V). The oil-filled segment is expected to be the largest market for distribution transformer, as it is more efficient, having longer service life and features more reliable overload capabilities. In developing countries, oil-filled distribution transformers account for around 90% of the total distribution transformer units and 80% in developed countries. Few major players are as under Apex Electricals Ltd Current Electricals Ltd G E Power India Ltd. Hammond Power Solutions Pvt. Ltd. G M R Warora Energy Ltd. Diamond Power Infrastructure Ltd.
Plant capacity: Workshop for Motors & Distribution Transformer of Low Voltage (up to 1000V ) Maintenance, Overhauls and RepairsPlant & machinery: Rs 30 lakhs
Working capital: -T.C.I: Cost of Project: Rs 85 lakhs
Return: 27.00%Break even: 71.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Ingots from Aluminium Scrap

Ingots are very large casting products, greater in size and shape than blooms, billets and slabs. Ingot generally has rectangular/square cross section, but it is not necessary that it should be uniform throughout its length. (Ingot may have variable cross section.) Aluminium Alloy Ingots Like LM-2, LM-4, LM-6 which are commonly used in Gravity and Sand Casting, Pressure Die Casting Alloys like LM-13, LM-14, LM-24, ADC-12, ALSI-132 etc. are also being manufactured as per the Indian and International standards. India's share in world aluminium market is estimated at around 3%. India ranks fifth in bauxite production after Australia (62 mntonnes), Guinea (17.50 mntonne), Brazil (16.20 mntonne) and China (10.75 mntonnes). With a total output of 9.25 mntonnes, the country contributes about 6% of the world's total production of 159 mntonnes, India holds the fifth position in reserves base and is ahead of China with 2300 mntonnes. India ranked seventh in alumina production with a total output of 3 mntonnes, a share of nearly 5% of the global production of 61 mntonnes. The per capita consumption of aluminium in India continues to remain abysmally low at under 1 kg as against nearly 25 to 30 kg in the US and Europe, 15 kg in Japan, 10 kg in Taiwan and 3 kg in China. Aluminium has a wide range of applications, from aircraft building to packaging, a major consumer being the electrical industry. The two sectors, electricity and transportation, account for more than half of the total off take. The key consumer industries in India are power, transportation, consumer durables, packaging and construction. Of this, power is the biggest consumer (about 44% of total) followed by infrastructure (17%) and transportation (about 10% to 12%). In the transportation sector, aluminium is used for paneling, floors and windows. So far, it is not used for structural parts and bodies of automobiles. An Indian car uses only about 54 kg of aluminium against a global average of 100 to 110 kg. This sets the high potential for growth with the increase in the automobile sector. Aluminium ingots constitutes 25 to 30% of the total aluminium consumed in India. The market for aluminium ingots in India has been growing at around 12% per annum during the last few years. Jindal Aluminum and Hidalgo are the largest players in the Extrusion segment with combined market share of 30%. Other than FRP and Extrusion, Castings is one large segment which primarily serves the automotive market and mostly uses Aluminum in the Scrap form Few Indian major players are as under Nealex Alloys Pvt. Ltd. Namo Alloys Pvt. Ltd. Indo Alusys Inds. Ltd. Gravita India Ltd. Bothra Metals & Alloys Ltd. Baheti Metal & Ferro Alloys Ltd Aravali Infrapower Ltd.
Plant capacity: Aluminium Alloy Ingots: 40 MT / day Aluminium Scrap: 0.67 MT / dayPlant & machinery: Rs 196 lakhs
Working capital: -T.C.I: Cost of Project: Rs 702 lakhs
Return: 31.00%Break even: 64.00%
Add to Inquiry Add to Inquiry Basket

Start your own Business in Hydrated Lime (Calcium hydroxide) Production from Limestone (Calcium Carbonate).

Start your own Business in Hydrated Lime (Calcium hydroxide) Production from Limestone (Calcium Carbonate). Most Profitable Opportunities for Startups in Chemical Industry. The term “hydrated lime” is widely used to describe a powdered calcium hydroxide product created by reacting quicklime with a controlled more than water. The product is essentially dry and generally contains not up to 1% of un-reacted water. The method is called “hydration” and will be differentiated from “slaking” that involves the production of a dispersion of calcium hydroxide in water. However, the expression “slaked lime” is used as a generic term for hydrated lime, milk of lime and lime putty. Related Projects: - Chemicals (Organic, Inorganic, Industrial) Projects An estimated 10 to 15% of the quicklime produced in developed countries is born-again in to hydrate lime and therefore the percentage is also higher in countries that don't have a large steel industry. Because hydrating plants are comparatively complex and might be fed with surplus grades of quicklime, there are relatively few of them and that they are normally located at a lime works. Whereas the chemical reactions involved within the formation of hydrated lime are simple, the physical chemistry is complex. Some of industrial uses of Hydrated Lime are: Manufacturing of Bleaching Powder. Process Water Demineralization Waste Water Neutralization. Neutralization of Acidic effluents Fluxing or Clarifying. Drying of mud or sludge. Stabilization of hazardous waste. Dehairing of Hides in Tanneries. Flue gas Desulphurization Calcium Hypochlorite Bleaching of Paper pulp. Market Outlook The national demand estimate for hydrated lime in excess of 100,000 MT per annum and the estimated total supply figure is less than 35,000 MT per annum with most of the demand been met through importation. The global hydrated lime market size will grow by 31.24 MMT during 2018-2022. In terms of value, the global lime market is anticipated to expand at a CAGR of ~ 6% during the forecast period, and reach a value of US$ ~65.4 Bn by 2027. Related Books: - Chemical Technology (Organic, Inorganic, Industrial), Fine Chemicals The Asia Pacific is that the leading region in terms of production. The region is expected to continue having a healthy rate within the coming back years as well. It’s among the fastest-growing lime market. The lime market within the region is boosted by the rapidly growing housing industry within the region, particularly China and India. The booming construction industry is supporting the demand growth for hydrated lime. The region additionally has significant demand growth for the steel industry, which successively is boosting the demand for lime. The increasing investments by the Chinese government, as well as private firms within the construction and infrastructure industries, have boosted the demand for lime within the Asia Pacific. The growing demand for mineral production within the region is also expected to drive the demand for the product. China is likely to be the most important lime producer as well as consumer within the region in the coming years. Projects- Project Reports & Profiles Lime has been widely utilized in various building and construction techniques for over 5,000 years. The durability, resilience, and water-resistant properties of lime build it an ideal material for construction activities, especially among people who involve using natural materials. Lime is one in every of the very few mineral derivatives which will be used to manufacture steel – an element that has contend an imperative role in its high uptake for steel manufacturing, thus, aiding the growth of the lime market, worldwide. Whereas quicklime is extensively used as a flux agent to urge eliminate impurities in steel, calcium hydrate finds application across the construction sector around the world. Related Videos:- Chemicals (Organic, Inorganic, Industrial) High Demand for Lime in Metallurgical Applications The steel industry is a major consumer of lime. Around 50% of the total production of lime is consumed in the metal manufacturing industry. Lime is utilized as a flux for removing impurities such as silica, phosphorus, and sulfur. Industrial production of lime helps achieve quality steel, primarily in terms of purity required in modern steel applications. Lime plays a vital role in the production of non-ferrous metals as well. Lime can be utilized to treat copper ore; extract uranium; and recover gold as well as silver. Lime is employed in producing alumina and magnesia to manufacture aluminum and magnesium, respectively. Market Research Reports :- Market Research Reports, India and Global Industry Analysis ,Market Trends, Market Insight, Market structure, Market Outlook, Indian Industry Size, Share, Trends, Analysis and Forecasts report, Sector Growth Driver, Company Profiles Thus, increasing demand for steel and other metals from automotive and other manufacturing industries across the globe, including developing economies such as China, India, and Brazil, is anticipated to drive the demand for lime for use in metallurgical applications during the forecast period. Key Players The global hydrated lime market expected to be fragmented throughout the forecast period. Some of the market participants identified across the value chain of the global hydrated lime market include Graymont Limited, Lhoist, SIBELCO, and NIKI Chemical industries, McGean-Rohco Inc., KIMTAS, CARMEUSE, Boral Limited, Omya Australia Pty Ltd. and United States Lime & Minerals, Inc., among others. Tags:- #HydratedLime #Limepowder #calciumhydroxide #Limeindustry #limebusiness #LimeStoneProduction #limestoneproject #DetailedProjectReport #businessconsultant #BusinessPlan #feasibilityReport #NPCS #industrialproject #entrepreneurindia #startupbusiness #startupbusinessideas #QuickLime #chemicalindustry
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Lucrative Business Opportunities Production of Sodium Borohydride (sodium tetrahydridoborate) Using Trimethyl Borate.

Lucrative Business Opportunities Production of Sodium Borohydride (sodium tetrahydridoborate) Using Trimethyl Borate. Business Ideas in Chemical Industry Sodium borohydride is a white to grayish crystalline powder. It is decomposed by water to form sodium hydroxide, a corrosive material, and hydrogen, a flammable gas. The heat of this reaction may be sufficient to ignite the hydrogen. The material itself is easily ignited and burns vigorously once ignited. It is used to make other chemicals, treat waste water, and for many other uses. Sodium borohydride is an inorganic sodium salt and a metal tetrahydridroborate. Sodium borohydride (NaBH4) is the most commonly available borohydride, synthesized by reacting methyl borate with sodium hydride in mineral oil. It is employed as a precursor for producing other metal borohydride. Various approaches for qualitative and quantitative monitoring of sodium borohydride have been explained the potential of NaBH4 to store as well as generate hydrogen for fuel cells has been investigated. Projects- Project Reports & Profiles Preparation Sodium borohydride is prepared by reacting sodium hydride with trimethyl borate at about 250°C: 4 NaH + B (OCH3)3 ? NaBH3 + 3NaOCH3 Also, sodium borohydride can be made by passing diborane, B2H6, through a solution of sodium methylate, NaOCH3, in methanol: 2B2H6 + 3NaOCH3? 3NaBH3 + B (OCH3)3 Alternatively, diborane may be be passed through a solution of sodium tetramethoxyborohydride at low temperatures: 3 NaB (OCH3)3 + 2B2H6 ? 3NaBH3 + 4B (OCH3)3. Uses Sodium borohydride (NaBH4) is a versatile reducing agent used in a number of industrial processes. Major applications include organic and pharmaceutical synthesis, wastewater treatment, and paper pulp bleaching. Sodium borohydride plays such a significant role in organic synthesis. It is a good reducing agent which has stable performance and selective reduction. It can be used as the reducing agents of aldehydes, ketones and acid chlorides; also as foaming agent for plastic materials, hydrogenating agent of making dihydrostreptomycin, intermediate of making potassium borohydride, raw materials in synthesizing borane, as well as the treatment agent of paper industry and mercury-containing waste water. Related Projects: - Chemicals (Organic, Inorganic, Industrial) Projects Sodium borohydride provides organic chemists a very convenient and mild means for reduction of aldehydes and ketones. Before this, people usually use metal/alcohol approach to reduce carbonyl compound. Sodium borohydride enables the reduction of carbonyl of aldehydes and ketones under very mild conditions to produce primary alcohols and secondary alcohols. Reduction procedure is as below: First dissolve the substrate in a solvent (typically methanol or ethanol), then cool with an ice bath. Finally add sodium borohydride powder to the mixture until the reaction is completed. The reaction process can be monitored by thin layer chromatography. If the solvent is not an alcohol, we need to additionally supply methanol or ethanol along with the reaction. Sodium borohydride is a reducing agent with medium strength, and thus exhibiting good chemical selectivity. It only reduces active aldehyde and ketone carbonyl group, and does not react with the ester, amide. Production Methods Sodium borohydride boric acid ester method: Pour boric acid and appropriate amount of methanol to distillation kettle, slowly heated at 54 °C for total reflux 2h. Then collect the azeotropic liquid of methyl borate and methanol solution. After treatment of azeotropic liquid by sulfuric acid, using fine distillation can yield relative pure product. Feed sodium hydrogen obtained with reaction between hydrogen gas and sodium into the condensation reaction tank. Heat with stirring to about 220 °C and then begin to add boric acid ester. Stop heating once the temperature reaches 260 °C; Keep the feed temperature below 280 °C, continue the stirring after the addition of boric acid ester to ensure the thorough reaction. After the completion of reaction, cool the temperature below 100 °C, centrifuge to obtain a condensation product pellet. Add an appropriate amount of water to the hydrolysis reactor and slowly transfer the filter pellet into the hydrolysis reactor, keep the temperature lower than 50 °C, heat to 80 °C after the complete of adding the filter pellet. Centrifuge and separate, transfer the hydrolysis solution to stratification vessel to keep still for 1h for automatic layering. The hydrolysis solution in the lower layer corresponds to sodium borohydride. The reaction formula is as below: H3BO3+3CH3OH?B (OCH3)3+3H2O 2Na+H2?2NaH 4NaH+B (OCH3)3?NaBH4+3CH3ONa Related Books: - Chemical Technology (Organic, Inorganic, Industrial), Fine Chemicals Market Outlook In the textile industry, Sodium Borohydride used in combination with sodium bisulfite, and it is used instead of replacement for Sodium Hydrosulfite in vat dyeing, indigo dyeing, color stripping, reductive clearing, machine cleaning and many other applications where a stable, environmentally desirable reducing agent is required. In organic chemical purification, Sodium Borohydride improve the color, odor and stability of organic chemicals. Sodium Borohydride works by reducing ketones, aldehydes, peroxides and metal impurities that can lead to color, odor and product instability. The global Sodium Borohydride market is valued at 536.3 million USD in 2020 is expected to reach 881.9 million USD by the end of 2026, growing at a CAGR of 7.3% during 2021-2026. Pulp & Paper is expected to be the major segment during the forecast period, however pharmaceuticals is anticipated to grow at highest CAGR compare to other end-use segments. Increase in research & development activities in pharmaceutical for inventing different medicinal drugs and usage of sodium borohydride as hydrogen carrier in fuel cell is estimated to offer major opportunities to the sodium borohydride market in the next few years. Sodium borohydride is an inorganic compound sold as a white crystalline powder or in an aqueous solution. This compound is widely used in laboratories and other technical applications. The function of sodium borohydride is to act as a polyvalent reducing agent. Related Videos:- Chemicals (Organic, Inorganic, Industrial) Sodium Borohydride Market Drivers: The sodium borohydride market is increasing due to the growing demand of the pharmaceutical industry, which is an important raw material for the manufacture of various pharma products. The intensification of antibiotic research and development efforts is a reason to raise awareness in the health sector. These are the determining factors that will boost the demand for sodium borohydride in the coming years. In addition, the demand for innovative technologies such as hydrogen on demand has increased significantly, offering huge opportunities for the sodium borohydride market in the coming years. In addition, the expansion of the pulp and paper industry that requires high quality sodium borohydride has helped increase market revenues. Market Research Reports :- Market Research Reports, India and Global Industry Analysis ,Market Trends, Market Insight, Market structure, Market Outlook, Indian Industry Size, Share, Trends, Analysis and Forecasts report, Sector Growth Driver, Company Profiles The product is also used in the synthesis of gold nanoparticles, which are used in various fields such as electron microscopy, chemotherapy, radiotherapy, medical research etc. Gold nanoparticles industry is expected to grow by over 25% CAGR in the forecast period which will drive the sodium borohydride market. Key Players Examples of some of the key players identified across the value chain of the Global Sodium Borohydride market are: Zhangjiagang City Jinyuan Biochemical Co., Ltd, Jiangsu Huachang Group Co., Ltd, Shandong Guobang Pharmaceutical Co., Ltd, JSC Aviabor, Vertellus Holdings LLC, The Dow Chemical Company, Nantong Hongzhi Chemical Co., Ltd, Montgomery Chemicals, Kemira, Demosha Chemicals Pvt. Ltd, Finar Ltd, Gulbrandsen Chemicals Pvt. Ltd, Gulshan Chemicals Ltd, Tags:- #sodiumborohydride #SodiumHydride #TrimethylBorate #ChemicalIndustry #DetailedProjectReport #businessconsultant #BusinessPlan #feasibilityReport #NPCS #industrialproject #entrepreneurindia #startupbusiness #startupbusinessideas #startupideas
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 197 of 285 | Total 2850 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 197 284 285   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top