REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Telangana- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Telangana is a state in the Southern region of India. It has an area of 114,840 km2 and is the twelfth largest state in India. Most of it was part of the princely state of Hyderabad, ruled by the Nizam of Hyderabad during the British Raj, joining the Union of India in 1948. Telangana was separated from Andhra Pradesh as a new 29th state of India, with the city of Hyderabad as its capital. Hyderabad will continue to serve as the joint capital city for Andhra Pradesh and Telangana for a period of not more than ten years. Telangana is situated on the Deccan Plateau, in the central stretch of the eastern seaboard of the Indian Peninsula. It covers 114,800 square kilometers (44,300 sq. mi). The region is drained by two major rivers, with about 79% of the Godavari River catchment area and about 69% of the Krishna River catchment area, but most of the land is arid. Telangana region has rich natural resources. About 45 per cent of the forest area in Andhra Pradesh state is in Telangana region while 20 per cent of the country's coal deposits in the country are also found here. Telangana is also rich in limestone deposits that cater to cement factories. Telangana has other mineral resources like bauxite and mica. Perennial rivers Godavari and Krishna enter Andhra Pradesh in Telangana before flowing down through other regions and ending up in the Bay of Bengal. Telangana region is sitting on potential oil and natural gas reserves, according to a report by Director General of Hydrocarbons (DGH). Telangana has a significant amount of Software export in India. While majority of the Industry is concentrated over Hyderabad, the other cities are also becoming significant IT destinations in the state. Hyderabad's IT exports exceeded $7 billion in 2014.There have been extensive investments in digital infrastructure.

 

AGRICULTURE

Rice is the major food crop and staple food of the state. Other important crops are tobacco, mango, cotton and sugar cane. Agriculture has been the chief source of income for the state's economy. Important rivers of India are the Godavari, Krishna flow through the state, providing irrigation. Telangana agriculture department separated from Andhra Pradesh as part of Andhra Pradesh bifurcation It aims promote agricultural trade and to boost up the agricultural production and productivity in the Telangana.

 

TOURISM IN TELANGANA

Telangana State Tourism Development Corporation (TSTDC) is a state government agency which promotes Tourism in Telangana. Telangana has a variety of tourist attractions including historical places, monuments, forts, water falls, forests and temples. Charminar, Golconda Fort, QutbShahi Tombs, Chowmahalla Palace, Falaknuma Palace and Bhongir Fort, are some of the monuments in the state. The Charminar, built in 1591 CE, is a monument and mosque located in Hyderabad, Telangana, India.

 

DEMOGRAPHIC PROFILE

Telangana with a population of 351.9 lakhs (according to the 2011 census) accounts for about 3.6% percent of the total population of India. Out of this, 177.0 lakhs (50.2%) are males and 174.9 lakhs (49.8%) are females. The sex ratio of the state is 988 as against the national figure of 943. The population density in the state is 307 persons/Sq.Km. In 2012-13, the services sector at Rs.  1, 14,046 crores, contributed 58.1% to the GSDP (at constant prices). It is followed by industry sector, contributing 27.9% (Rs. 54,687 crores) and the agriculture sector’s contribution of 14% (Rs. 27,450 crores). The services sector had fastest growth  of  11.31%  followed  by  industry  sector  (10.04%)  and  agriculture  sector  (6.89%) between 2004-05 and 2012-13.

The Telangana government has proposed to add 230 crore plants in the next three years under a flagship programme which envisages boosting of tree cover in the state by nearly 8%.

 

FOOD AND INDUSTRIAL PROCESSING SECTOR

The Telangana government plans to put greater emphasis on value-addition in the farm sector in its industrial policy. The departments of industry and commerce, agriculture and agro marketing would coordinate together to achieve value maximization for farmers. The government is also keen on encouraging e-marketing activities, which involves networking all agriculture mandis in the state so that farmers get access to prevailing prices across important markets and thereby helping them unlock the right value for their produce. The state in collaboration with research institutes in the country would facilitate an ideal adoption of latest practices ranging from seed technology and farm machinery to improve farm productivity. the state government is also considering specific projects such as setting up a pharmaceutical city near Hyderabad and a cotton hub in Warangal district, the largest producer of long-staple cotton. The Telangana government has begun a survey to identify land that can be offered to new industries in the state. The Telangana government is set to announce its new industrial policy under which scheduled castes and scheduled tribe entrepreneurs would be specially encouraged.

Telangana Government is mulling to set up a 'Pharma City' near the state capital in about 8,000 acres. The City will include industries as well as residential colony, and a power plant with 500 MW capacity will be set up adjacent to the pharma city to provide captive, dedicated and uninterrupted power supply to the industry. The pharma city is expected to accommodate about five lakh employees besides their families in the residential colony touching about twenty lakh over a period. Delegation of Drugs Manufacturers' Association that an international consultancy organisation with expertise in developing in the information technology and pharmaceuticals manufacturing sectors may become backbone of Telangana economy, leaving power production, ports and oil and natural gas to play a pivotal role in driving prosperity in the residuary state. Industrial estates should be contacted to design the pharma city. Telangana's per capita income of Rs 24,409 in 2004-05 has phenomenally grown to a whopping Rs 83,020. While Hyderabad has less number of households using open toilets at 0.9 per cent, Mahabubnagar is at 71.1 per cent. The land-locked state is expected to have nearly Rs 4,000 crore surplus budget, but lingering power deficit may force the new government to spend more on the power purchase. Telangana, spread in 1,14,840 square kilometres, has 66.46 per cent literacy rate with a population of 3.52 crore.

 

ECONOMY OF TELAGANA

The Economy of Telangana is mainly driven by agriculture. Two important rivers of India, the Godavari and Krishna, flow through the state, providing irrigation. Rice, cotton, mango and tobacco are the local crops. Recently, crops used for vegetable oil production such as sunflower and peanuts have gained favour. There are many multi-state irrigation projects in development, including Godavari River Basin Irrigation Projects and NagarjunaSagar Dam, the world's highest masonry dam. Telangana is a mineral-rich state, with coal reserves at SingaerniColleries. The population of Telangana is over 35 million now – much more than 30 million for the whole of Andhra Pradesh, including Telangana, at the time of its formation in 1956. The demands on governance have multiplied over this half a century. Apart from commitment to the development of the region, a smaller state being more easily accessible to the common people can intelligently and speedily grapple with their problems.

 

INDUSTRIAL POLICY FRAMEWORK FOR STATE OF TELANGANA

Industrialization will be the key strategy followed for economic growth and development for Telangana, the 29th state of the country. People of the new state have very high expectations from the Telangana State Government for creating jobs for the youth, promote development of backward areas, maximize growth opportunities by optimum utilization of the available resources, harness the talents and skills of the people etc. The Government of Telangana State realizes that industrial development requires large-scale private sector participation, with the government playing the role of a facilitator and a catalyst. The government is committed to provide a graft-free, hassle-free environment in which the entrepreneurial spirit of local, domestic and international investors will thrive to take up their industrial units in the state of Telangana as the preferred investment destination.

The new Telangana State Industrial Policy will be rooted in certain core values, as follows:

 

                • The Government regulatory framework shall facilitate industrial growth

                • Entrepreneurs will thrive in a peaceful, secure and progressive business regulatory                                        environment

                • Industrial development will lead to massive creation of jobs benefitting local youth

                • Industrialization shall be inclusive and facilitate social equality

 

The new Telangana State Industrial Policy will strive to provide a framework which will not only stabilize and make existing industries more competitive, but also attract and realize new international and national investments in the industrial sector. It is expected that the most significant outcome of this approach will be the production of high quality goods at the most competitive price, which establishes “Made in Telangana-Made in India” as a brand with high global recognition. The Industrial Policy Framework has the following mandate for departments that have any responsibility in the industrialization of the State—Minimum Inspection and Maximum Facilitation.

The Government of Telangana State is determined to create an ecosystem in which the ease of doing business in the state matches and even exceeds the best global standards. Telangana State Government is aware that offering a hassle-free system is considered to be of the highest priority by the industrialists, and accordingly the government will implement a very effective industrial clearance system that will go beyond the traditional single window system.

 

THRUST AREAS AND CORE SECTORS

•             Life Sciences including, bulk drugs, formulations, vaccines, nutraceuticals, biological,   incubation centers, R&D facilities and medical equipment.

•             IT Hardware including bio-medical devices, electronics, cellular communications.

•             Precision engineering, including aviation, aerospace, defence.

•             Food processing and nutrition products including dairy, poultry, meat and fisheries.

•             Automobiles, Transport Vehicles, Auto-components, Tractors and Farm Equipment.

•             Textiles and Apparel, Leather and leather value added products like shoes, purses, bags,         artificial   material infused and coated textiles, paper and paper products.

•             Plastics and Polymers, Chemicals and Petro-chemical, glass and ceramics.

•             FMCG and Domestic Appliances.

•             Engineering and Capital Goods, including castings, foundry and Ferro-alloys and other    metallurgical industries.

•             Waste Management and Green Technologies.

•             Renewable Energy and Solar Parks.

•             Mineral-based and wood-based Industries.

•             Transportation/Logistic Hub/Inland Port/Container Depot.

 

Telangana has emerged as a State that provides that right climate for the growth of IT business and is now one of the most preferred destinations in the Country.

The State of Telangana is poised towards creating a benchmark in Information & Communication Technology (ICT) endowed with a high quality state-of-the-art physical & communication infrastructure of international standards, harnessed human resources, and proactive business friendly policies of the Government.

It is estimated that about 20 lakh acres of land is available in the state that has been identified as unfit for cultivation in Telangana. Based on a detailed survey of these land parcels and identification of those parcels that are fit for industrial use, an industrial land bank for the State of Telangana will be developed.

The development of industrial and related infrastructure will be the responsibility of the Telangana State Industrial Infrastructure Corporation (TSIIC). The financial base of the TSIIC will be strengthened and it will be made to function as an effective organization. All lands in the State identified as fit for industrial use will be transferred to the TSIIC.

To support industrialization, the Government of Telangana will earmark 10% of water from all existing and new irrigation sources for industrial use. Water pipelines will be laid as a part of infrastructure creation for each industrial park by TSIIC. The Government of Telangana State recognizes that quality power and uninterrupted power supply are keys to the growth of the industrial sector. The State has a clear short-, medium-, and long-term plans to first overcome the power shortage and eventually become a power surplus state. Accordingly, uninterrupted power supply will be arranged in each industrial park. The Telangana State Government will encourage usage of non-conventional energy for industrial purposes.

The Telangana State Government is committed to encourage the process of industrialization by making various kinds of incentives available to the entrepreneurs. The Telangana State Government also assures an entrepreneur-friendly and graft-free regime of disbursing the incentives. The Telangana State Government will consider providing incentives to the entrepreneurs in the following areas-

•             Stamp duty reimbursement

•             Land conversion cost

•             Investment subsidy

•             VAT reimbursement

•             Interest subsidy

•             Clean production measures

•             Reimbursement of infrastructure development costs etc.

A sound industrial policy has to ensure that the state taxation structure is conducive to industrial growth and state financial resource augmentation. Distortions in the tax structure leads to evasion of taxes and clandestine transport of industrial inputs and outputs to neighbouring states, which may have advantageous tax rates. The presence of important national and state highways, coupled with the availability of resources and opportunities, provides a great potential for development of industrial corridors in the state along these roadways.

The Industrial Corridors that will be developed initially will be:

 

1) Hyderabad-Warangal Industrial Corridor

2) Hyderabad-Nagpur Industrial Corridor

3) Hyderabad-Bengaluru Industrial Corridor

The new Industrial Policy brought out by the Government of Telangana promises to revolutionise the way industrial sector has been viewed by successive governments in this country. A day is not far when the new Industrial Policy of Telangana will shine as an exemplar among the best in the world.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 103 of 286 | Total 2856 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 103 285 286   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Tomato Powder

Tomato powder is manufactured by dehydrating tomato and creating a fine powder. Tomato powder is one of the most widely used ingredient in food and beverage industry. It is rich in flavor which has increased its application in various product lines such as seasonings and savories, soup mixes, snack foods, curries and gravies, baby foods and many more. Tomatoes have high levels of glutamic acid, which is the molecule that creates a majority of the umami taste. Tomato powder is the most effecient way to store dehydrated tomatoes. The powder consists of just one ingredient: dehydrated natural tomatoes. It’s an awesome option not only for replacing tomato juice, paste, and sauce, but it can also add flavors in unexpected places. Tomato powder has a wide range of application in food and beverage industry owing to its rich flavoring attribute. Moreover, tomato contains a lot of health promoting phytochemicals and is rich in anti-oxidants which helps to keep skin cells healthy and keep ageing at bay. This has contributed to the growth of tomato powder market in cosmetic industry. Moreover, its use as a healthy supplement is bringing surge in the tomato powder market.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Rolling Mill

A rolling mill which uses the "hot rolling" method is capable of processing more gross weight of metal than any other manufacturing process. Rolling mills which use the "cold rolling" method can process the most tonnage from the entire range of cold working processes. There are many types of rolling processes used in rolling mills, including ring rolling, roll bending, roll forming, profile rolling, and controlled rolling. Rolling is a metal forming process in which metal stock is passed through one or more pairs of rolls to reduce the thickness and to make the thickness uniform. The concept is similar to the rolling of dough. Rolling is classified according to the temperature of the metal rolled. If the temperature of the metal is above its recrystallization temperature, then the process is known as hot rolling. If the temperature of the metal is below its recrystallization temperature, the process is known as cold rolling. In terms of usage, hot rolling processes more tonnage than any other manufacturing process, and cold rolling processes the most tonnage out of all cold working processes.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Tobacco Tooth Powder, Tooth Powder from Tobacco Dust

In India, there is a widespread misconception that tobacco is good for the teeth. Tobacco products are popular as a dentifrice in different parts of India and children also use such dentifrices. Among female smokeless tobacco users, the dominating form is tobacco toothpowder (41.3%). Among men it was khaini (57.1%) followed by tobacco toothpowder (8.8%). Many companies take advantage of this misconception and exploiting the addictive nature of nicotine by packaging and positioning their products as dental care products without explicitly stating so. Oral hygiene has assumed great importance in Indian households in the recent past and fast moving consumer goods (FMCG) companies are arming themselves to the teeth to capture a large share of this fast growing market. India oral care market has shown tremendous growth by value & volume in last few years in FMCG sector of India. Growing oral care market is driven by change in life style of consumers, demand of premium products, rising of disposable income etc. Penetration level of oral care products in urban area is high. India Oral care market is fragmented in 5 categories includes toothpaste, toothbrushes, toothpowder, mouthwash and others. Toothpaste is dominant in oral care market. It is a primary product in daily oral hygiene has huge presence in urban and rural area. Increasing health and personal oral hygiene, Indians are now more aware how their diet affecting their teeth and mouth. Indian is now willing to pay more for prevention attention. This has helped toothpaste category to grow drastically in oral care market.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Investment Opportunity in Bicycle and Cycle Rickshaw Manufacturing Industry

Investment Opportunity in Bicycle and Cycle Rickshaw Manufacturing Industry. Best Industry for Starting a Business. Bicycles are one of the world's most popular modes of transportation, with some 800 million bicycles outnumbering cars by two to one. Bicycles are also the most energy-efficient vehicle—a cyclist burns about 35 calories per mile (22 calories per km), while an automobile burns 1,860 calories per mile (1,156 calories per km). Bicycles are used not only for transportation, but for fitness, competition, and touring as well. They come in myriad shapes and styles, including racing bikes, all-terrain bikes, and stationary bicycles, as well as unicycles, tricycles, and tandems. Bicycles are widely used for transportation, recreation, and sport. Throughout the world, bicycles are essential to moving people and goods in areas where there are few automobiles. Intensifying traffic congestion issue and elevating fuel prices are foreseen to remain the key factors driving the need for cycling, and raising the demand for bicycles thereby. Growing health concerns among consumers, in addition to surging acceptance of green transportation in an effort to reduce carbon footprint, will play a pivotal role in the growth of global bicycle market in next eight years. Moreover, increasing government support encouraging adoption of bicycles and rapid development of dedicated cycling infrastructure in developed as well as developing economies will reportedly push the sales of bicycles in upcoming years. A growing application base of bicycles in trekking and recreational activities, coupled with a soaring number of cycling events will specifically uplift the demand for sports bicycles in near future. A bicycle is a common mode of transport for people in rural areas particularly within low income societies, but is continuously gaining traction in urban areas as well especially among successful and affluent people. The Indian bicycle market comprises of mainly roadsters, fancy, kids and other types of bicycles. Other bicycles include cycles meant for different purposes like mountain bikes, sports bike, hybrid bike, touring bike, etc. The categorization of bicycle market can be done based on end user viz. retail sector and institutional sector. Retail sector encompasses residents or people who buy bicycles for their personal use or for their near and dear ones from retail outlets. Whereas institutional sales are usually done in bulk and the prospective customers include Central or State Governments or societies or clubs at times. The bicycle market in India is projected to grow at a CAGR of over 11%, during 2016-2021, on account of growing population base, increasing discretionary spending and rising health consciousness among people. In India, cycling is being swiftly adopted as a means to stay fit and as a popular recreational activity. Further, many of state governments have started construction of dedicated bicycle lanes in major cities to encourage cycling, as an environment friendly means of transportation. Large share of the country’s total population is based in rural areas, where roadster bicycle is an important mode of transportation. With constant increase in volume demand for roadster bicycles in India, the segment is anticipated to continue dominating India bicycle market. Due to unavailability of efficient transportation facilities and appropriate road network in rural part of India, roadster bicycles are extensively used for transportation. Moreover, many state governments have also distributed bicycles to school children India, one of the fastest growing economies in the world, is witnessing high demand for sports bicycle. Growing focus on fitness and health, and increasing trend of using cycles to commute to work is projected drive sales of sports bicycles in the country during the coming years. On the back of growing demand for sports bicycles in the country, many international players have introduced their products in India bicycle market. Although, India has emerged as one of the major manufacturers of bicycles in the world, the country imports considerable number of high-end or premium bicycles from other countries to address domestic demand for high end bicycles. As sharing and rental services are currently gaining higher traction in the global bicycle market, stakeholders are increasingly striving to adapt to this trend. Moreover, a large number of corporate embracing cycling as a sustainable alternative to commute will be a significant factor impacting the sales of bicycles in next few years. At a moderate CAGR of 4.2%, the global market for bicycle will attain the revenue approaching US$ 80 Bn during 2018-2026. The market was valued at around US$ 55 Bn in 2017 and holds optimistic growth prospects over the assessment period. The global bicycle market is expected to grow moderately over the next few years. Adoption of a healthy lifestyle among people has given rise to fitness consciousness. Increasing popularity of mountain biking as a sport has propelled the sales of marketing bikes. Additionally, rising fuel costs, increased congestion on roads, lack of parking space, etc., are some of the drivers expected to spur bicycle market growth. Another key factor that is expected to drive this market is the increased focus on eco-friendly means of transportation in order to curb pollution. Bicycles are emerging as alternatives for shorter distance transportation that cause no pollution. Moreover, regulatory initiatives to promote cycling in order to reduce harmful carbon emissions and noise pollution are expected to be favorable for industry growth. In most of the developed countries, there has been a strong cycling facilities construction and bicycle facilities have received good support from the Governments. High energy efficiency along with perception of cycling as a fitness activity has contributed to increase in demand. Increasing costs of raw materials and growing demand and popularity of fuel driven bikes or motor bikes may hamper market growth in the coming years. The absence of cycling tracks in most parts of developing countries like India due to saturation of road width and inability of further road expansion can be a hindrance to the growth of this market. The Cycle Rickshaw is a small-scale local means of transport; it is also known by a variety of other names such as bike taxi, velotaxi, pedicab, bikecab, cyclo, beca, becak, trisikad, or trishaw. A Cycle Rickshaw is often hailed as environment-friendly and an inexpensive mode of transportation. Since it is considered as Indian traditional ride they are almost used in each and every part of India which includes villages, small towns, metros, heritage sites etc. In metros these are used inside institutional areas, market places and also in narrow and crowded lanes where there is accessibility problem for vehicles. Cycle Rickshaw - Doorstep service. - Convenient for Local Shopping. - Important Source of livelihood for the Poor. - Cost Efficient. - Poor Man’s Taxi. - Safe Transport for Local Schools. - Use for Garbage Collection. - Inexpensive and convenient mode of carrying goods over short distances. - A Tourist Attraction. - A Home and Rest Place Away from Home. - They do not require petroleum fuel and are thus inherently non-polluting. There are guesstimates that close to 1 million cycle rickshaws ply on the Indian roads carrying about 3-4 billion passengers-km/year. In some cities they are the major means of transport. They provide employment to about 700,000 rickshaw pullers, are very maneuverable and are completely non-polluting and hence environmentally friendly means of transport. It is very unfortunate that deliberate policies in most of the urban towns have been made by the concerned authorities to phase out these rickshaws. Hence these nonpolluting vehicles are being replaced by polluting (both air and noise wise) petrol and diesel powered 3wheelers. One of the reasons for authorities to phase out these rickshaws is because they are considered humanly degrading. An electric cycle rickshaw can take care of this issue besides providing extra income to a rickshaw puller. Cycle rickshaws also play a crucial role in employment and poverty alleviation in many countries in Asia. In most developing countries, the rickshaw pullers are migrant workers from rural areas looking for employment in urban areas. Rickshaws are one of the most important contributors to the Bangladeshi economy; nearly 6 % of Bangladesh’s GDP is contributed by rickshaw pullers. Around 20 % of the Bangladeshi population relies directly or indirectly on rickshaw pulling. Tags Bicycle Manufacturing Process Pdf, Bicycle Manufacturing Project Report, How are Bicycles made? Bicycle Manufacturing Business Plan, Manufacturing Process of Bicycle, Bicycle Industry, Bicycle Manufacture Business Plan, Bicycle Manufacturing, Bicycle Manufacture, Bicycle Manufacturing Industry, How to Start Bicycle Factory, Bicycle Manufacturing Industry, Bicycle Production, Cost of Setting Up a Bicycle Manufacturing Plant, Bicycle Plant, Project Profile on Bicycle Production, Rickshaw Manufacturing Company, How to Start Rickshaw Manufacturing Business, Bicycle Manufacturing Project Report, Bicycle Manufacturing Business, Bicycle Business Opportunity in India, How to Start Your Own Bicycle Business, Cycle Rickshaw, Bicycle and Cycle Rickshaw Manufacturing, Cycle Rickshaw Manufacture, Cycle Rickshaw Factory, Bicycle and Cycle Rickshaw Project Report, Rickshaw Manufacturing Company, Project Report on Bicycle Manufacturing Industry, Detailed Project Report on Rickshaw Manufacturing, Project Report on Rickshaw Manufacturing, Pre-Investment Feasibility Study on Bicycle Manufacturing, Techno-Economic feasibility study on Bicycle Manufacturing, Feasibility report on Rickshaw Manufacturing, Free Project Profile on Bicycle Manufacturing, Project profile on Rickshaw Manufacturing, Download free project profile on Bicycle Manufacturing
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Investment Opportunity in Bicycle and Cycle Rickshaw Manufacturing Industry

Investment Opportunity in Bicycle and Cycle Rickshaw Manufacturing Industry. Best Industry for Starting a Business. Bicycles are one of the world's most popular modes of transportation, with some 800 million bicycles outnumbering cars by two to one. Bicycles are also the most energy-efficient vehicle—a cyclist burns about 35 calories per mile (22 calories per km), while an automobile burns 1,860 calories per mile (1,156 calories per km). Bicycles are used not only for transportation, but for fitness, competition, and touring as well. They come in myriad shapes and styles, including racing bikes, all-terrain bikes, and stationary bicycles, as well as unicycles, tricycles, and tandems. Bicycles are widely used for transportation, recreation, and sport. Throughout the world, bicycles are essential to moving people and goods in areas where there are few automobiles. Intensifying traffic congestion issue and elevating fuel prices are foreseen to remain the key factors driving the need for cycling, and raising the demand for bicycles thereby. Growing health concerns among consumers, in addition to surging acceptance of green transportation in an effort to reduce carbon footprint, will play a pivotal role in the growth of global bicycle market in next eight years. Moreover, increasing government support encouraging adoption of bicycles and rapid development of dedicated cycling infrastructure in developed as well as developing economies will reportedly push the sales of bicycles in upcoming years. A growing application base of bicycles in trekking and recreational activities, coupled with a soaring number of cycling events will specifically uplift the demand for sports bicycles in near future. A bicycle is a common mode of transport for people in rural areas particularly within low income societies, but is continuously gaining traction in urban areas as well especially among successful and affluent people. The Indian bicycle market comprises of mainly roadsters, fancy, kids and other types of bicycles. Other bicycles include cycles meant for different purposes like mountain bikes, sports bike, hybrid bike, touring bike, etc. The categorization of bicycle market can be done based on end user viz. retail sector and institutional sector. Retail sector encompasses residents or people who buy bicycles for their personal use or for their near and dear ones from retail outlets. Whereas institutional sales are usually done in bulk and the prospective customers include Central or State Governments or societies or clubs at times. The bicycle market in India is projected to grow at a CAGR of over 11%, during 2016-2021, on account of growing population base, increasing discretionary spending and rising health consciousness among people. In India, cycling is being swiftly adopted as a means to stay fit and as a popular recreational activity. Further, many of state governments have started construction of dedicated bicycle lanes in major cities to encourage cycling, as an environment friendly means of transportation. Large share of the country’s total population is based in rural areas, where roadster bicycle is an important mode of transportation. With constant increase in volume demand for roadster bicycles in India, the segment is anticipated to continue dominating India bicycle market. Due to unavailability of efficient transportation facilities and appropriate road network in rural part of India, roadster bicycles are extensively used for transportation. Moreover, many state governments have also distributed bicycles to school children India, one of the fastest growing economies in the world, is witnessing high demand for sports bicycle. Growing focus on fitness and health, and increasing trend of using cycles to commute to work is projected drive sales of sports bicycles in the country during the coming years. On the back of growing demand for sports bicycles in the country, many international players have introduced their products in India bicycle market. Although, India has emerged as one of the major manufacturers of bicycles in the world, the country imports considerable number of high-end or premium bicycles from other countries to address domestic demand for high end bicycles. As sharing and rental services are currently gaining higher traction in the global bicycle market, stakeholders are increasingly striving to adapt to this trend. Moreover, a large number of corporate embracing cycling as a sustainable alternative to commute will be a significant factor impacting the sales of bicycles in next few years. At a moderate CAGR of 4.2%, the global market for bicycle will attain the revenue approaching US$ 80 Bn during 2018-2026. The market was valued at around US$ 55 Bn in 2017 and holds optimistic growth prospects over the assessment period. The global bicycle market is expected to grow moderately over the next few years. Adoption of a healthy lifestyle among people has given rise to fitness consciousness. Increasing popularity of mountain biking as a sport has propelled the sales of marketing bikes. Additionally, rising fuel costs, increased congestion on roads, lack of parking space, etc., are some of the drivers expected to spur bicycle market growth. Another key factor that is expected to drive this market is the increased focus on eco-friendly means of transportation in order to curb pollution. Bicycles are emerging as alternatives for shorter distance transportation that cause no pollution. Moreover, regulatory initiatives to promote cycling in order to reduce harmful carbon emissions and noise pollution are expected to be favorable for industry growth. In most of the developed countries, there has been a strong cycling facilities construction and bicycle facilities have received good support from the Governments. High energy efficiency along with perception of cycling as a fitness activity has contributed to increase in demand. Increasing costs of raw materials and growing demand and popularity of fuel driven bikes or motor bikes may hamper market growth in the coming years. The absence of cycling tracks in most parts of developing countries like India due to saturation of road width and inability of further road expansion can be a hindrance to the growth of this market. The Cycle Rickshaw is a small-scale local means of transport; it is also known by a variety of other names such as bike taxi, velotaxi, pedicab, bikecab, cyclo, beca, becak, trisikad, or trishaw. A Cycle Rickshaw is often hailed as environment-friendly and an inexpensive mode of transportation. Since it is considered as Indian traditional ride they are almost used in each and every part of India which includes villages, small towns, metros, heritage sites etc. In metros these are used inside institutional areas, market places and also in narrow and crowded lanes where there is accessibility problem for vehicles. Cycle Rickshaw - Doorstep service. - Convenient for Local Shopping. - Important Source of livelihood for the Poor. - Cost Efficient. - Poor Man’s Taxi. - Safe Transport for Local Schools. - Use for Garbage Collection. - Inexpensive and convenient mode of carrying goods over short distances. - A Tourist Attraction. - A Home and Rest Place Away from Home. - They do not require petroleum fuel and are thus inherently non-polluting. There are guesstimates that close to 1 million cycle rickshaws ply on the Indian roads carrying about 3-4 billion passengers-km/year. In some cities they are the major means of transport. They provide employment to about 700,000 rickshaw pullers, are very maneuverable and are completely non-polluting and hence environmentally friendly means of transport. It is very unfortunate that deliberate policies in most of the urban towns have been made by the concerned authorities to phase out these rickshaws. Hence these nonpolluting vehicles are being replaced by polluting (both air and noise wise) petrol and diesel powered 3wheelers. One of the reasons for authorities to phase out these rickshaws is because they are considered humanly degrading. An electric cycle rickshaw can take care of this issue besides providing extra income to a rickshaw puller. Cycle rickshaws also play a crucial role in employment and poverty alleviation in many countries in Asia. In most developing countries, the rickshaw pullers are migrant workers from rural areas looking for employment in urban areas. Rickshaws are one of the most important contributors to the Bangladeshi economy; nearly 6 % of Bangladesh’s GDP is contributed by rickshaw pullers. Around 20 % of the Bangladeshi population relies directly or indirectly on rickshaw pulling. Tags Bicycle Manufacturing Process Pdf, Bicycle Manufacturing Project Report, How are Bicycles made? Bicycle Manufacturing Business Plan, Manufacturing Process of Bicycle, Bicycle Industry, Bicycle Manufacture Business Plan, Bicycle Manufacturing, Bicycle Manufacture, Bicycle Manufacturing Industry, How to Start Bicycle Factory, Bicycle Manufacturing Industry, Bicycle Production, Cost of Setting Up a Bicycle Manufacturing Plant, Bicycle Plant, Project Profile on Bicycle Production, Rickshaw Manufacturing Company, How to Start Rickshaw Manufacturing Business, Bicycle Manufacturing Project Report, Bicycle Manufacturing Business, Bicycle Business Opportunity in India, How to Start Your Own Bicycle Business, Cycle Rickshaw, Bicycle and Cycle Rickshaw Manufacturing, Cycle Rickshaw Manufacture, Cycle Rickshaw Factory, Bicycle and Cycle Rickshaw Project Report, Rickshaw Manufacturing Company, Project Report on Bicycle Manufacturing Industry, Detailed Project Report on Rickshaw Manufacturing, Project Report on Rickshaw Manufacturing, Pre-Investment Feasibility Study on Bicycle Manufacturing, Techno-Economic feasibility study on Bicycle Manufacturing, Feasibility report on Rickshaw Manufacturing, Free Project Profile on Bicycle Manufacturing, Project profile on Rickshaw Manufacturing, Download free project profile on Bicycle Manufacturing
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start a Profitable Business of LV Control & Power Cables, MV Cables

Start a Profitable Business of LV Control & Power Cables, MV Cables. Profitable Project Investment Opportunity in Cable Industry Low voltage (LV) power cable forms an essential component for secondary distribution of power at voltage less than 1 kV. Different types of low voltage accessories include fittings and fixtures, cable joints, cable terminations, among others which are used for cable installations in overhead and underground installations. Low voltage cables are used to supply power at low voltage. These cables form essential parts of the electrical and electronic systems in a broad range of applications. The cables have prime importance in the power sector, and thus, are important components in the generation, transmission, and distribution of electricity by power utilities. Low voltage cables are built up with solid and standard, rigid, copper and aluminum conductors, flexible copper conductors. Low voltage cable is an important component for secondary distribution of electricity. Low voltage accessories are utilized to maintain cables in the distribution network. Low voltage cables are used in the wiring of electrical installations in vehicles. The battery cable, a low voltage connection solution used in automobiles and agriculture and construction equipment, is also gaining popularity due to its ability to reduce electrical noise and withstand high temperatures during high voltage and low voltage applications. The growing automotive industry offers a significant market potential to low voltage cable manufacturers. Increasing production of renewable power along with growth in industrialization are the key factors that drive the growth of this market. Furthermore, government incentives to expand or upgrade the transmission & distribution (T&D) system is another factor boosting the growth of the market. Lack of funding make the market volatile along with significant delay in authorization of different T&D projects due to complexity in planning are key restraining factors that hinders the growth of the market. Increasing demand in power along with various wind power policies in different countries are the factors that would offer abundant growth opportunities to the market. Volatility in prices of raw material along with low-quality & cheap products in grey market are major challenges faced by key market players. A rising demand for electricity has fueled development in the power generation, transmission and distribution (T&D) sectors. The demand for equipment, such as low-voltage cable, is increasing with the growth in generation and T&D infrastructure. A low-voltage cable derives its demand from the deployment of distribution transformers in distribution networks. These transformers are mainly used in the utility sector, followed by the industrial and commercial sectors. In 2015, the utility sector accounted for almost 80 percent of market revenue. This trend is likely to drive the growth of the market over the forecast period. Growing penetration of renewable-energy sources in the power-generation sector will drive future demand for ?low-voltage cables.? The use of low voltage cables in smart grids is expected to fuel the demand further over the next four years. Low voltage cables are deployed in the T&D networks of smart grids. Moreover, the addition of novel appliances such as heat pumps, electric vehicles charging stations, and solar panels to the distribution networks further necessitates the use of low voltage cables in their interconnection. Rising investment in smart grids in APAC, EMEA, and the GCC countries owing to increased demand for electricity in these regions is expected to be a significant factor in the market’s growth during the forecast period. Major driving factors for the growth of low voltage cable market are Increasing demand of renewable power and expansion in urbanization and industrialization. The global low voltage cable market offers new growth opportunities, due to rising demand for power and increasing automotive industry growth in Asia Pacific region with high potential. The price of raw material is unpredictable and growing neutral market providing cheap products and low quality is expected to promote the use of low voltage cables. The smart grid is expected to fuel the demand further over the forecast years of low voltage cable market. Low voltage cable is an important component for secondary distribution of electricity. To satisfy the growing demand for electricity transmission and distribution, the network is expanding globally. Low voltage accessories are utilized to maintain cables in the distribution network. Accessories and power cables are important components for transmission and distribution system and will also grow with the growth in transmission and distribution system. Low voltage cables are utilized for electrical equipment with a voltage rating for alternating current between 50 to 1000v and for direct current between 75 to 1500v, thus they are not subjected to high electric stress. Low voltage cables are built up with solid and standard, rigid, copper and aluminum conductors, flexible copper conductors. Medium Voltage Cables, or MV cables, is a category defined by the International Electrotechnical Commission (IEC) as having a voltage rating of above 1kV up to 100kV. There does, however, remain some ambiguity over where the medium voltage cable band begins and ends, depending on the countries, the standard setting bodies, and the type of system used as historically engineers only referred to low voltage and high voltage. The concept of medium voltage was only introduced as the level of voltages increased and the need arose for a greater classification range, which now often includes extra low and extra high voltage. Medium voltage cable is suitable for use in wet or dry locations when installed in accordance with NEC. It is for use in aerial, direct burial, conduit, open tray, and underground duct installations. Medium-voltage cables are commonly used in mobile substation equipment, for distribution of power in industrial settings and in mining to supply power to drills, shovels, haulers, etc. These cables often come in standard voltages, including 5,000; 8,000; 15,000; 25,000; and 35,000 V. The medium voltage cables and accessories market is expected to grow from an estimated US$ 41.45 Billion in 2017 to US$ 56.18 Billion by 2022, at a CAGR of 6.27%, from 2017 to 2022. Increase in renewable energy generation and rapid industrialization and urbanization is expected to drive the market for medium voltage cables and accessories. The underground medium voltage cables and accessories segment of the installation market is expected to hold the largest share during the forecast period. On the basis of installation, the medium voltage cables and accessories market has been segmented into underground, overhead, and renewables. The underground sector accounted for the largest market share. Several benefits of using underground cables are lower transmission loss and maintenance costs, they release no electric fields, and can easily absorb power loads; these factors are expected to drive the medium voltage cables and accessories market. Thus, the underground segment of the medium voltage cables and accessories market is expected to grow at the highest CAGR during the forecast period. From the cable installation type, the medium voltage cable is divided into aerial cable, underground cable and submarine cable. Among them, underground cable is expected to become the fastest composite growth rate of products. From the voltage level, the 6-13 kv medium voltage cable will dominate the global medium voltage cable market demand. It is expected that by 2022, the global 6-13 KV medium-voltage cable and accessories market will reach 14.25 billion U.S. dollars, the period of annual composite increase rate reached 6.47%. Some of the driving factors like hasty growth in industrialization & urbanization, high production of renewable energy and rising government policies to expand the T&D systems are contributing for the market growth. However, less financial support and delay in intricate planning & authorization of projects are limiting the market. On the other hand, growing demand for power and wind policies in emerging countries is providing a significant opportunity for the market. In developed economies, such as Europe, requirement of increasing power generation and expanding wind sector offers significant growth potential. However, fluctuating prices of metals, such as copper, aluminum, and other metals, restrain the market growth. The demand for power infrastructure is driven by growing investments in renewables’ sector, thus offering significant opportunities for growth. Rapid industrialization and urbanization has been the key driving factor sustaining the growth of the medium voltage cables market. Industrialization and urbanization has been increasing at a much faster pace in the developing economies, resulting in more requirement for power generation, transmission, and distribution and thus is expected to boost the requirement of medium voltage cables. Tags LV & Control Cables, LV and MV Cables, Low Voltage Cable Production, Profile on Production of Electric Wires and LV Cables, Low Voltage Cable, Manufacturing of Low Voltage Cable, Low Voltage & Control Cables, Cable Manufacturing, Wire and Cable, Cable Manufacturing Process, Electric Cable Manufacturing in India, Business Ideas in Wire & Cable Manufacturing, Cable Manufacturing Company, Power Cable, Wires & Cables, Electrical Cables, Power Cable Manufacture, MV Cables Production, Medium Voltage (MV) Cables, Medium-Voltage Cables, Electrical Wire Manufacturing Process Pdf, Manufacturing of Medium Voltage Power Cables, Cable Manufacture, Cable Manufacturing Company, Project Report on Low Voltage Cable Production Industry, Detailed Project Report on Low Voltage Cable Production, Project Report on MV Cables Production, Pre-Investment Feasibility Study on Low Voltage Cable Production, Techno-Economic feasibility study on MV Cables Production, Feasibility report on Low Voltage Cable Production, Free Project Profile on MV Cables Production, Project profile on MV Cables Production, Download free project profile on Low Voltage Cable Production
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start a Betel Nut (Supari) Processing Business

Start a Betel Nut (Supari) Processing Business. Profitable Arecanut (Betelnut) Processing Industry Betel nut is a combination of three ingredients. People roll small pieces of the nut from Areca catechu, more commonly called betel palm, in a leaf from the Piper betel vine, then add powdered slaked lime or limestone paste, and chew it. The substance is popular in certain parts of the world, primarily Asia and Africa, Some components of betel nut have pharmacological properties, but little evidence supports its use for any therapeutic purpose. Areca nut is widely used mainly in the Asian and South East Asian population. It is normal that after having food in India people use areca nut along with the betel leaves as a digester in small quantities. Uses & Application Supari 1. It can be used as one of the ingredients in the domestic life for the preparation of pan. 2. It is one of the most important ingredients in the manufacturing of Pan Masala. 3. It can be used in the preparation of scented supari as well as coated supari. Tannin 1. It can be used for the preparation of dye fixing agent. 2. It can be used in the manufacturing of ink. Rope or Brushes 1. Rope can be used for spinning. 2. Brushes can be used for painting. Pan Masala 1. It can be used for relaxing food ingredients. It may make users fresh impetus. 2. It may change the taste of human. It may create temporarily enjoyment and energy. Betel nut's medical use is limited, and long-term negative reactions to betel quid chewing are well known. A decrease in positive symptoms among men with schizophrenia was attributed to betel nut consumption. India is the major producer and consumer of arecanut in the world. Production is concentrated in six states, namely Karnataka, Kerala, Assam, Meghalaya, Tamil Nadu and West Bengal. Arecanut is the major plantation crop of coastal and southern districts of the country under assured irrigation facility. The ever increasing demand for areca products like paan, supari and gutkha has led to continuous increase in arecanut prices worldwide. The processing methods, maturity and consumer preferences influence the types of arecanut products prepared. Area and production shares show that Karnataka leads with 46 per cent of area and 47 per cent of production, followed by Kerala with 24 and 23 per cent, respectively. Globally it is primarily grown in India, Bangladesh, China, Indonesia and Myanmar. India leads the production followed by China and Bangladesh. India is the highest producer of arecanut with a production of around 3.3 lakh tonnes and a total acreage under cultivation of 2.64 lakh hectares, with Karnataka and Kerala accounting for nearly 72 per cent of the total production. Over six million people are engaged in arecanut cultivation, processing and trade. More than 85 per cent of the area under cultivation is made up of small and marginal holdings. Among the two varieties white nuts have a share of 60 per cent. India is also the largest consumer with around 3.2 lakh tonnes. Areca nut is majorly influenced by weather conditions in the production area, government policies, the growth of consumer industries, government policies for consumer industries and a few others. The regular consumption of areca nut causes severe diseases such as throat cancer and mouth cancer. Due to a significant number of people affected by the consumption of areca nut, the Indian and several governments have posed various regulations over the areca nut production and consumer industries. This fact has restrained the market for areca nut. Also, the increasing awareness among people regarding healthy life style and severe effects of areca nut have resulted into a barrier for areca nut market. As the pre-bearing age of the palm trees is between 5 to 8 years, and only 5% of them result into seed set, the cultivation of areca nut consumes a lot of time. The time required for cultivation of areca nut and required environmental conditions such as minimum 70% humidity restrains the market at the supplier end. The demand for areca nut and its products has been increasing steadily in India. Tags Betel Nut (Supari) Processing, Arecanut Processing in India, Betel Nut Processing in India, Betel / Areca/ Supari Nuts Processing, Areca Nut Production in India, Betel Nuts, Supari, Supari Processing, Arcanut (Betelnut) Processing, Areca Nut Processing Unit, Betel Nut Processing, Betel Nut Processing Plant, Arecanut Processing Pdf, How to Start Betel Nut Business, Arecanut Processing PPT, Supari or Betel Nut (Areca Catechu, Linn.), Arecanut, Betel Nut Processing Unit, Betel Nut (Areca Catechu) Uses, Arecanut Cultivation (Betel Nut), Supari Business, Processing of Arecanut, Arecanut Business Plan, Betel Leaf Cultivation Business Plan, Betel Nut Processing Plant, How to Plant a Betel Nut Tree, Project Report on Betel Nut (Supari) Processing, Detailed Project Report on Betel Nut (Supari) Processing,Project Report on Betel Nut (Supari) Processing, Pre-Investment Feasibility Study on Betel Nut (Supari) Processing, Techno-Economic feasibility study on Betel Nut (Supari) Processing, Feasibility report on Betel Nut (Supari) Processing, Free Project Profile on Betel Nut (Supari) Processing, Project profile on Betel Nut (Supari) Processing, Download free project profile on Betel Nut (Supari) Processing
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Aloe Vera Gel and Powder Manufacturing Business

Aloe Vera Gel and Powder Manufacturing Business. Start a Profitable Aloe Vera Processing Industry Aloe Vera is widely used for its healing and restorative properties. It belongs to the liliacea family and has thick green leaves which contain gel and latex. The gel consists primarily of water and the rest includes various vitamins, amino acids, enzymes, hormones, minerals and sugars, most of which are found in the human body. Aloe leaves secrete a clear gel that when broken off from the rest of the plant that can be applied topically to heal wounds and soothe skin. Aloe Vera Gel is one of the product prepared from aloe vera itself. Aloe vera Gel has very good medicine for external use for sun burning and pain killer. It has various medicinal values which makes very good commercial value. Aloe Vera gel is widely used in the food industry, cosmetic and toiletries industry, and the pharmaceutical industry. Aloe vera gel is a most important product can produce from aloe vera leaves. The item has the both consumer and industrial demand. The gel, which is a colourless and transparent liquid, consists mainly of water. The rest contains several amino acids, enzymes, vitamins, hormones, minerals and sugars; most of which are found in the human body. The demand of Aloe Vera gel in the consumer market is driven by its healing and restorative properties, due to which it finds applications in several industries. Apart from this, the other factors contributing to the market growth include scientific research on the health benefits of Aloe Vera based products, rising disposable incomes, supplier innovations. Aloe Vera gel is widely used in the food industry, cosmetic and toiletries industry, and the pharmaceutical industry. According to industry experts, the global aloe vera gel market was worth US$ 465 Million in 2016, growing at a CAGR of around 11% during 2009-2016. The market is growing steadily over the last decade driven by varied and increasing usage of Aloe Vera gel in food, health care, and cosmetic industries. The healthcare and cosmetics sectors are currently the two biggest drivers of Aloe Vera gel consumption. Aloe Vera powder is known for its skin healing properties. It is used for irritated, sunburned, or inflamed skin. Aloe vera powder contains salicylates, which are known to relieve pain. It is also high in antioxidants, vitamin C, and other minerals which allow the skin to heal faster. Aloe vera powder helps to make food and other supplements more bio-available to your body. Aloe Vera Powder is composed of the freeze-dried inner "gel" of aloe leaf plant. Aloe vera plants have been used as for the treatment of hepatitis. Spray drying and freeze drying are the most common methods of producing aloe vera powder from gel. Aloe Vera powder is the perfect remedy for sunburned skin. Aloe Vera powder can also be used as an aftershave treatment as it will both hydrate the skin and help heal razor burn and small nicks. Aloe vera powder is less bulky, easier to handle, and less susceptible to spoilage in long term storage, but it is important to ensure the biological activities of the product. Aloe Vera powder can be added to cold process soaps at slight trace to provide the skin with nutrients and healing properties. • Aloe Vera powder can also be added to melt and pour soap while it is melted. • Aloe Vera powder can be added to bath tea formulas. • Aloe Vera powder can be added to bath salt formulas, and scrubs. • Aloe Vera powder can be added to facial mask formulas, and foot treatments. • Aloe Vera powder can be infused and added to lotions, creams, and ointments. • Aloe Vera powder is used in face tonic, body wash, shampoo, conditioner recipes. It is also used in some hemorrhoid cream recipes to reduce inflammation. • Aloe Vera powder can be mixed with water to create a gel. This gel can be applied to burns for pain relief and to promote faster healing. • Aloe vera powder can be used in bath bomb recipes. • Aloe vera powder can be infused in massage oils. Aloe Vera Gel and Aloe vera powder has tremendous demand in the herbal base products area. As there is lot of use of aloe vera and aloe vera Gel in the field of cosmetics, medicines. It has large used since from ancient time. There are many herbal base companies are trying best to explore the market available on the base of aloe and try to best utilization of available aloe. There is good export market of aloe vera Gel and as well as indigenous demand. The aloe vera based product market in Asia Pacific will grow considerably in the forecast period due to the huge demand and the presence of a large number of manufacturers. Increasing awareness and health concern among the consumers, is the key driving factor for aloe vera based product in Asia Pacific. Various innovative products, is driving the aloe vera market in Asia Pacific. Demand for aloe vera product in food industry is expected to grow with a fastest rate in the forecast period. Wide range of applications such as packaged drinking water, low-calorie fruit juice are creating new opportunity. Cosmetics is the largest end user sector of aloe vera product, which accounts India aloe vera products market is projected to surpass $242 million by 2022. Growth is expected to be driven by rising concerns among consumers regarding their health and skin problems, predominantly due to hectic and stressful lifestyles, which is resulting in a shift in consumer preference towards natural alternatives and herbal nutraceuticals. Moreover, growing awareness about consuming a healthy diet that can potentially reduce occurrence of lifestyle diseases such as high blood pressure, cholesterol, obesity and diabetes, is expected to boost demand for aloe vera products in India over the next five years. Improving lifestyle due to rise in economic factors and increasing awareness about aloe vera mainly in Asia Pacific leads to the growth of aloe vera product market in the region. Increasing demand for aloe vera majorly comes from Asia Pacific which in turn will drive aloe vera market size in the forecast period. Tags Aloe Vera Gel Manufacturing Business, Aloe Vera Gel Production Process, Aloe Vera Gel Manufacturing Business for Beginners, Aloe Vera Processing Plant, How to Make Aloe Vera Gel, Processing of Aloe Vera Leaf Gel, Production Process of Aloe Products, Aloe Vera Processing Machinery Cost, Aloe Vera Processing Plant Project Report, Aloe Vera Gel Making Process, Aloe Vera Powder Manufacturing Process, Aloe Vera Gel Manufacturing, Aloe Vera Gel Manufacturing Plant, Aloe Vera Processing, Aloe Vera Gel Products?, How to Make Aloe Vera Gel from Fresh Aloe Leave, Aloe Vera Gel & Powder, Aloe Vera Farming, How to Start Aloe Vera Gel Manufacturing Business, Aloe Vera Powder Manufacturing, Aloe Vera Farming Business Plan, Production of Aloe Vera Gel, Aloe Vera Gel Manufacture, Aloe Vera Products Manufacture, Process for Aloe Vera, Production of Aloe Vera Powder, Aloe Vera Gel & Powder Manufacturing Plant, How to Make Aloe Vera Powder, Aloe Vera Powder Production, Project Report on Aloe Vera Processing Industry, Detailed Project Report on Aloe Vera Gel Manufacturing, Project Report on Aloe Vera Powder Production, Pre-Investment Feasibility Study on Aloe Vera Gel Manufacturing, Techno-Economic feasibility study on Aloe Vera Powder Production, Feasibility report on Aloe Vera Gel Manufacturing, Free Project Profile on Aloe Vera Gel Manufacturing, Project profile on Aloe Vera Powder Production, Download free project profile on Aloe Vera Powder Production
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Baby Cereal Food Manufacturing Industry

Baby Cereal Food Manufacturing Industry. Start a Profitable Baby Food Production Business Baby Foods are those foods which are given to babies and infants for their sustenance during the few nascent years of their lives and can be demarcated into two types comprising of Infant Formula and Baby Foods. Infant Formulas serve as a replacement of mother’s milk as it emulates the nutritional attributes of a mother’s milk. And, baby foods are soft minced and mashed vegetables, fruits, meats, cereals, etc. for babies consumption and are sold in the form of purees or powders (to be consumed with the addition of water) and snacks. Baby foods are essentially the first alternative to the breast milk during the growth and development of babies. Purees of natural fruits and vegetables are given as nutritional food for babies initially. As they grow, the baby food available for them varies from infant formula to solid dried baby foods. Currently, health conscious parents are opting for organic baby foods over conventional baby food. There are mainly three forms of baby food, which are liquid concentrate, powder, and ready-to-feed. The powder is the least expensive form and it is used by mixing with water before feeding the infant. In the case of the ready-to-feed form of baby food, there is no need of addition of any liquid and mother can feed this directly to the baby. Furthermore, subcategories of baby foods include dried baby food, milk formula, prepared baby food and other baby food such as baby snacks and beverages. Cow milk-based formulas are gaining large adoption in emerging economies in the past few years. Increasing population base, rising disposable income level of individual and growing urbanization, are some of the major reasons, which are expected to be driving the baby food market in all across the globe. Baby food is either a total or partial substitute for breast milk for infants or toddlers of under two years. It is a soft food, which can be easily consumed by infants and babies. To meet the nutritional requirements of the baby, baby foods are especially designed by the manufacturers. Generally, baby food is prepared with required amount of proteins and iron, so that it properly helps in the baby’s growth and initial body development. The baby food market is classified into various segments which include product, health benefits and basic ingredients. Supermarkets, hypermarkets, small grocery retailers, and health & beauty retailers are the key distribution channels in the baby food industry. Supermarkets are the primarily preferred distribution channel among consumers, followed by health and beauty retailers. However, considering the scenario in few Asian developing countries such as India, small grocery retailers and health & beauty retailers hold significant share considering sales in the region. Small grocery retailers account for a comparatively smaller share in the baby food market but would witness rapid growth over the forecast period. Other distribution channels include discounters, non-grocery retailers, and non-store retailing. Baby food is one of the fastest growing categories in baby care and overall FMCG industry of India. Baby food market is segmented mainly into infant milk formula, baby cereals, follow-up formula and other products like baby juice, baby soup, and prepared baby food products. All of these products have witnessed significant growth in the past few years. Baby Food Market size in 2014 was valued at $50.7 billion and is expected to garner $72.7 billion by 2020, registering a CAGR of 6.4% during the forecast period 2015-2020. Traditionally, babies are fed with soft home cooked food, a practice that is still popular in underdeveloped and developing countries. However, growing urbanization and changing lifestyles have increased the demand for packaged baby foods in different societies and cultures. These foods are fed to babies between the ages of four to six months and two years. Growing awareness for nutrition, rise in organized retail marketing, urbanization paired with a significant increase in the count of working women population are key factors that boost the baby food industry growth. Concerns related to food safety, falling birth rates, and the practice of feeding home cooked food to babies are the key restraints in this market. The global baby food market is segmented based on product type, distribution channel and geography. Based on product type, the market is segregated into dried baby food, milk formula, prepared baby food, and other baby food. Presently, milk formula occupies the largest market share followed by the product segment of prepared baby food. However, over the forecast period, product segment of prepared baby food would gain prominent adoption in the global market. Sales of milk formula baby food is highly concentrated in the APAC region. Alternatively, demand for prepared baby food is largely limited to developed regions. However, market for prepared baby food, in developing regions would pick pace over the forecast period, subsequently leading to the dynamic growth of the baby food market in the APAC region. The global baby food market has been analyzed on the basis of four geographical regions, which include North America, Europe, Asia-Pacific and LAMEA. Asia-Pacific is leading the market in terms of adoption of new and innovative baby food products launched by various companies, followed by the European region. Asia Pacific is the largest market for milk formula and occupies more than half of the overall world baby food market share. Larger demand would be observed in the LAMEA region over the forecast period. Prepared baby food is the second largest market globally and is expected to grow the fastest CAGR during the forecast period. Growing time constraints among parents are the key factors propelling the increased adoption of prepared baby food. Presently, the demand for prepared baby food is largely limited to developed countries, however, over the forecast period, a considerable adoption would be witnessed in developing countries. Presently, demand for dried baby foods is moderate and would gain a steady pace over the forecast period. Increasing consumption of dried food with nutritionally balanced content is a key factor driving the demand for dried baby food products market. The global baby food market has experienced significant growth over the past few years, primarily due to rising population of working women, and their concern for good nutrition for their babies. Furthermore, manufacturing of baby food under strict health and safety standards has helped creating the awareness about the usefulness of packaged baby foods in providing the required nutrition for babies. This in turn has escalated the demand for baby food in the world market. Additionally, baby food is gaining popularity in the high income groups as a part of their status quo, especially in the emerging markets, which is expected to further drive the baby food market in emerging economies. Currently, owing to increasing demand for nutrition from the natural sources, the organic baby food segment is growing at a significant pace and several large players are engaging themselves to cash in the untapped markets. The demand for baby food in India is witnessing a continuous increase due to rising awareness among parents to adequately fulfil the nutritional requirements of their babies. Though the demand for baby food is comparatively a lot higher in developed countries as compared to developing nations, the market is witnessing increasing demand due to increasing purchasing power of the consumers and busy lifestyle of working women that restricts them to cook food for their babies at home. Baby food is expected to grow at a constant 2017 value CAGR of 8% during the forecast period to reach INR69.8 billion in 2022. The increasing number of working women, growing nutrition concerns for the development of babies among young mothers and the convenience of baby food available throughout the country will support the growth of baby food in India. The Indian baby food is emerging as one of the most promising markets across the globe due to rapid urbanization, expanding middle class, growing population, and increasing women workforce. Other major market drivers include rising disposable income, rising trend of nuclear families and growing number of urban households. The availability of good quality and nutritious baby food is gradually increasing due to the entry of large number of international and domestic players in the India’s baby food market. Tags Cereal for Baby Food, Processing of Baby Food and Infant Formula, Baby Food Cereal Manufacturing Plant, Baby Food Industry, Baby Cereal Food Production, Processing of Baby Food, Baby Cereal Factory, Baby Food Manufacturing, Baby Cereals, Baby Food Manufacturing Process, How to Start a Baby Food Manufacturing Company, How to Make Baby Cereal, Baby Cereal Food Making Factory, Manufacturing Process of Baby Food Products, Baby Food Manufacturing, How to Start a Baby Food Production, Baby/Infant Food Processing, Baby/Infant Food Processing, Baby Food Production, Cereal-Based Baby Food, Foods for Babies, Baby Food and Infant Formula, Baby Food Processing Plant, Production of Baby Food, How to Start a Baby Food Business, How to Start a Baby Food Company, Starting a Baby Food Business, Baby Food Production Unit, How to Start a Baby Food and Formula Business, Baby Food Business Plan, How to Start a Baby Food Production, Baby Food Manufacture, Project Report on Baby Food Processing Industry, Detailed Project Report on Baby Cereal Food Production, Project Report on Baby Cereal Food Production, Pre-Investment Feasibility Study on Baby Cereal Food Production, Techno-Economic feasibility study on Baby Food Manufacturing, Feasibility report on Baby Cereal Food Production, Free Project Profile on Baby Food Manufacturing, Project profile on Baby Food Manufacturing, Download free project profile on Baby Cereal Food Production
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Low Tension Cables, LT Power Cables Manufacturing Industry

Low Tension Cables, LT Power Cables Manufacturing Industry. Industrial LT Cables Production Business LT Cables or Low Tension PVC Cables are defined as per IS 1554 Part I having voltage grade up to 3.3kv. LT Cables designed to be used underground directly, buried in ducts, trenches or in tunnels for electric power transmission, are used in many applications including: • Infrastructure • Industries • Power Generation • Automation • Lighting • Sound and security • Video surveillance • Fire alarm Some LT cables with Special Fire Properties are used in Oil, Gas and Petroleum Sector and in application areas where fire safety is of critical importance. Low tension cables are used for transmitting the voltages below than 1 KV. Because the cable is not prone to any special electrostatic stress its construction is kept normal. Even the insulation is very simple in which a paper is impregnated using oil. Its viscosity increases by applying the resin and it also avoids damage. Over the outer sheath layer, there is another layer which keeps the cable protected from moisture and any environmental damage. There are two more types of low tension cable which are as follows. • Single-Core Cable A stranded circular core which is insulated with lead sheath. The lead sheath prevents any moisture penetration in the cable. Above the lead sheath, there is another layer which prevents the metal from corrosion. In these cables, no armoring is done during its manufacturing because the armor becomes a reason of excessive loss. • Multicore Cable A three core cable insulated with each other. The strands of the conductor are either circular shaped, oval or section-wise these are insulated using impregnated paper. Similar to the single core cable, the insulation is provided on each belt of the core. This outer covering prevents the penetration of moisture in the cable. A coating of lime water is also provided on the outer layer to avoid the cable to act adhesive. The major demand for electric wire and cable in India is likely to come from the railway and construction sectors due to rising government investment. The Government of India has allocated a budget of approximately 18 billion for the development of Indian Railways during 2016-2017 and the government also plans to develop 100 smart cities during the forecast period. Power cables, a critical segment of the power sector, are experiencing an escalating demand owing to the growth in power generation infrastructure. India is one of the biggest consumers of electric energy after the US and China. With rapid industrial development and urbanization in the country. However, the overall generation capacity is unable to cater to the existing demand. Moreover, the T&D infrastructure is quite old and needs extensive renovation. Rural electrification is another major factor, which is expected to propel the growth of the electric wire and cable market in India. GOI's goal to provide electricity to every home by 2020 should attract major investments in the sector. Wires and cables play an indispensable role in today’s digitally advanced life and find extensive usage across a number of applications in several industries. The extensive usage and applications of wires and cables across various industries will put the wires and cables industry on the right path for the future. In India, the size of the cable manufacturing industry is approx Rs. 40,000 crores. The specialised cable industry in which CMI operates currently, is roughly of the size of Rs. 10,000 crores. The government has announced ambitious plans for infrastructure development. One of the primary focus area of the development plan is railways, with over Rs. 800,000 Cr as promised investment over the period of 2015-2020. In addition, the government has earmarked Rs 50,000 crore (US$ 7.53 billion) to develop 100 smart cities across the country. Wires and cables market in the world and in India is highly fragmented, with the presence a number of small and medium enterprises. The organized sector manufactures high voltage durable cables, whereas the unorganized sector mainly captures the low voltage market, where products are mainly separated on the basis of the price. The intensifying competition in the industry is expected has put increasing pressures on all of players to maintain their market shares. Additionally, the low level of exports has also hampered the growth of this industry in India. However, the real estate’s boom in the country, promulgated by an incensement in the number of houses being bought and sold contributed positively towards the revenue generation by the cable market. Additionally, the demand for electricity is expected to be rise in future with increasing number of households, together with the sales of transmission and distribution equipment’s lead to positive inclination in demand for wires and cables & thus revenue generated by the industry. The wires and cables market is presently at its growing stage in our country and is expected to be capturing a significant share in the electrical equipment industry in the upcoming years. Global Cable & Wire market escalates to become 297.4 billion by 2019, with the demand for telecom cable taking the lead with 8.5% 5 Year Compound Annual Growth Rate (CAGR), followed by Power Cable with 7.5% CAGR. The growing trend in the building construction and automobile sector is expected to keep demand of copper high. Understanding the copper technology involved in copper production, exploration, mining, and the uses of copper, as well as the global industry structure would impact the copper mining on the environment, the various markets of copper, etc. The industry is affected by the price trends of copper, market performance, import/export scenario, the physical market trends, demand for copper, and of course, a market forecast. The Indian government has made an ambitious plan. Each segment in the wires and cables industry such as power cables, control cables, communication cables and others is subject to a gamut of different factors such as price cuts and number of units sold that play an important role in determining their respective revenues. The global wire and cable market can be broadly segmented by based on type, material, and application. By In terms of type, the low voltage wire and cable segment is consistently expected to constitute a dominant market share between 2018 and 2026. Increasing urbanization, which is resulting in the expansion of power transmission & distribution networks and rise in residential & commercial buildings, is a major factor attributed to the segment’s high share. Moreover, rising demand for low-voltage wires in electrical installations of automobiles is another factor accounting for its dominance throughout the forecast period. However, out of all types, the optical fiber cable segment is expected to expand at a significant CAGR of 6.1% owing to its increasing applications for telecommunication systems, television transmission, and data networks. By Based on material, the copper segment held a prominent share of the market in 2017 and is further expected to lead the wire and cable market during the forecast period. Superior electrical conductivity together with high ductile and tensile strength makes copper a versatile material for wires and cables. Tags Low Tension Cables, LT Power Cables, LT Cable, Manufacturing of Cables, Cables Manufacturing Process, Wire and Cable, Cable Manufacturing, Profitable Business Ideas in Wire & Cable Manufacturing industry, Low Tension Cables Manufacture, Electrical Cables, Low Tension Cable Production, Low Tension Power and Control Cables, Low Tension Power Cable, Manufacturing of Low Tension Cables, Electrical Cable Manufacture, LT Cable Manufacturing Business, LT Cable Production, Power Cable Manufacture, Cable Manufacturing Company, Cables Industry, Low Tension (LT) Cables, LT Control Cables, Wire & Cable Manufacturing Projects, Power Cable, How to Start LT Cable Production, Industrial Cable & Wire Manufacture, Project Report on LT Cable Manufacturing Industry, Detailed Project Report on LT Cable Production, Project Report on LT Cable Production, Pre-Investment Feasibility Study on LT Cable Production, Techno-Economic feasibility study on LT Cable Production, Feasibility report on LT Cable Production, Free Project Profile on LT Cable Production, Project profile on LT Cable Production, Download free project profile on LT Cable Production
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 103 of 286 | Total 2856 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 103 285 286   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top