Google Search

Search

Already a Member ?

Best Business Opportunities in Tamil Nadu- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Automotive Industry: Project Opportunities in Tamil Nadu

 

PROFILE:

The automotive industry in India is one of the largest in the world and one of the fastest growing globally. India's passenger car and commercial vehicle manufacturing industry is the seventh largest in the world, with an annual production of more than 3.7 million units in 2010. Automotive industry is the key driver of any growing economy. It plays a pivotal role in country's rapid economic and industrial development. It caters to the requirement of equipment for basic industries like steel, non-ferrous metals, fertilisers, refineries, petrochemicals, shipping, textiles, plastics, glass, rubber, capital equipments, logistics, paper, cement, sugar, etc. It facilitates the improvement in various infrastructure facilities like power, rail and road transport. Due to its deep forward and backward linkages with almost every segment of the economy, the industry has a strong and positive multiplier effect and thus propels progress of a nation. The automotive industry comprises of the automobile and the auto component sectors.

 

RESOURCES:

Tamil Nadu is being popularly hailed as “Detroit” of India as it has a large Automobile and Ancillary sector. Automobile industry plays a crucial role in the State economy and has been one of the key driving factors, contributing 8% to State GDP and giving direct employment to 2,20,000 people. More than100 companies in the Automotive and Auto Ancillary industry are located in this state, maintaining highest production norms by implementing internationally recognized quality standards. Chennai has emerged as India's largest automobile and auto components exporter in India. Hyundai has made Chennai the manufacturing and export hub for its small cars. Tamil Nadu has the largest auto components industry base. Currently, Tamil Nadu accounts for above 32% of India's production capacity. Automobile manufacturers operate "Just - in-Time" avoiding inventory costs. The state has a well-developed automotive and auto component industry. It is the hub of Indian automobiles industry. Several automobile and automobile ancillary units are located in Tamil Nadu. It has manufacturing facilities across the automotive spectrum from tractors to battle tanks. Global auto majors like, Hindustan Motors and Mitsubishi have commenced production plants. Ashok Leyland and TAFE have set up expansion plants in Chennai. Fortune 500 companies such as Hyundai and Ford have established manufacturing facilities in the state.

 

GOVERNMENT POLICIES:

Government brought out a very innovative Policy "Ultra Mega Policy for Integrated Automobile Projects" that offers a very attractive package of support to automobile projects investing more than Rs.4000 Crores. As a result of this Policy, since May 2006, investments attracted by Tamil Nadu is automobiles & components manufacturing is Rs.21900 Crores, almost 5 times of the Investments attracted during previous 15 years (May 1991-April 2006). The total employment potential in these new projects is: 1.20 lakhs (direct + Indirect). Govt of India is currently implementing a project "National Automotive Testing R&D Infrastructure Project" (NATRIP) in Oragdam near Chennai at a project cost of about Rs.450 Crores. This project aims at facilitating introduction of world-class automotive safety, emission and performance standards in India as also ensure seamless integration of our automotive industry with the global industry.

 

Textile: Project Opportunities in Tamil Nadu

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Tamil Nadu has traditional strengths in the textile sector. In the post-quota abolition regime, the Textile Industry has tremendous opportunities for growth as well as challenges to be met. Availability of cotton at fair prices and at right quality, the backlog in modernization, supply of inputs particularly credit and power at reasonable rates etc. are all essential for the textile industry to be competitive in an increasingly uncertain trading environment. The Handlooms, Power looms, Hi-Tech Weaving Parks, Garments & Hosiery, Processing Apparel Park are important components of the textile industry.

GOVERNMENT POLICIES:

 

The Ministry of Textiles in India has formulated numerous policies and schemes for the development of the textile industry in India. The government of India has been following a policy of promoting and encouraging the handloom sector through a number of programmes. Most of the schematic interventions of the government of India in the ninth and tenth plan period have been through the state agencies and co-operative societies in the handloom industries. Some of the major acts relating to textile industry include: Central Silk Board Act, 1948, The Textiles Committee Act, 1963, The Handlooms Act, 1985, Cotton Control Order, 1986, The Textile Undertakings Act, 1995Government of India is earnestly trying to provide all the relevant facilities for the textile industry to utilize its full potential and achieve the target. The textile industry is presently experiencing an average annual growth rate of 9-10% and is expected to grow at a rate of 16% in value, which will eventually reach the target of US $ 115 billion by 2012. The clothing and apparel sector are expected to grow at a rate of 21 %t in value terms.

 

Leather: Project Opportunities in Tamil Nadu

 

PROFILE:

Leather Industry occupies a place of prominence in the Indian economy in view of its massive potential for employment, growth and exports. There has been increasing emphasis on its planned development, aimed at optimum utilisation of available raw materials for maximising the returns, particularly from exports.  The leather and leather products industry is one of India’s oldest manufacturing industries that catered to the international market right from the middle of the nineteenth century. The leather industry employs about 2.5 million people and has annual turnover of Rs. 25,000 crores. India is the third largest leather producer in the world after China and Italy

RESOURCES:

Leather industry in Tamil Nadu is considered to be very ancient and some say it is of more than two centuries old. The state accounts for 70 per cent of leather tanning capacity in India and 38 per cent of leather footwear and components. The exports from Tamil Nadu are valued at about US $ 762 million, which accounts for 42 per cent of Indian leather exports. Hundreds of leather and tannery industries are located around Vellore, Dindigul and Erode its nearby towns such as Ranipet, Ambur, Perundurai, Nilakottai and Vaniyambadi. The Vellore district is the top exporter of finished leather goods in the country. That leather accounts for more than 37% of the country's Export of Leather and Leather related products such as finished leathers, shoes, garments, gloves and so on. The tanning industry in India has a total installed capacity of 225 million pieces of hide and skins of which Tamil Nadu alone contributes to an inspiring 70%. Leather industry occupies a pride of place in the industrial map of Tamil Nadu. Tamil Nadu enjoys a leading position with 40% share in India's export.

GOVERNMENT POLICIES:

Government policies in support of the industry:

• The entire leather sector is now de-licensed and de-reserved, paving way for expansion on modern lines with state-of-the art machinery and equipment

• 100% Foreign Direct Investment and Joint Ventures permitted through the automatic route

• 100% repatriation of profit and dividends, if investments made in convertible foreign currency. Only declaration to this effect to the Reserve Bank is required.

• Promotion of industrial parks (one leather park in Andhra Pradesh, one leather goods park in West Bengal, one footwear park in Tamil Nadu and one footwear components park in Chennai).

• Funding support for modernizing manufacturing facilities 

• Funding support for establishing design studios

• Duty free import of raw materials (namely raw skins, hides, semi finished leather and finished leather) and of embellishments and components under specific scheme

• Concessional duty on import of specified machinery for use in leather sector

• Duty neutralization / remission scheme

Food Processing: Project Opportunities in Tamil Nadu

 

PROFILE:

India is the world's second largest producer of food next to China, and has the potential of being the biggest with the food and agricultural sector. The Indian food processing industry stands at $135 billion and is estimated to grow with a CAGR of 10 per cent to reach $200 billion by 2015. The food processing industry in India is witnessing rapid growth. In addition to the demand side, there are changes happening on the supply side with the growth in organised retail, increasing FDI in food processing and introduction of new products. India's food processing sector covers fruit and vegetables; meat and poultry; milk and milk products, alcoholic beverages, fisheries, plantation, grain processing and other consumer product groups like confectionery, chocolates and cocoa products, Soya-based products, mineral water, high protein foods etc.

RESOURCES:

Tamil Nadu has historically been an agricultural state and is a leading producer of agricultural products in India. In 2008, Tamil Nadu was India's fifth biggest producer of Rice. The total cultivated area in the State was 5.60 million hectares in 2009-10. The state is the largest producer of bananas, flowers, tapioca, the second largest producer of mango, natural rubber, coconut, groundnut and the third largest producer of coffee, sapota, Tea and Sugarcane. Tamil Nadu's sugarcane yield per hectare is the highest in India. Among states in India, Tamil Nadu is one of the leaders in livestock, poultry and fisheries production. Tamil Nadu had the second largest number of poultry amongst all the states and accounted for 17.7% of the total poultry population in India. With the third longest coastline in India, Tamil Nadu represented 27.54% of the total value of fish and fishery products exported by India in 2006.

GOVERNMENT POLICIES:

Tamil Nadu government has come out with following policies :

·         Raise in processed foods in the market from 1% to 10%.

·         Raise value addition levels from 7% to 30 %

·         Food processing industry is one of the growing areas identified for exports. Free Trade Zones (FTZ) and Export Processing Zones (EPZ) have been set up with all infrastructures. Also, setting up of 100% Export oriented units (EOU) is encouraged in other areas. They may import free of duty all types of goods, including capital foods.

·         Capital goods, including spares up to 20% of the CIF value of the Capital goods may be imported at a concessional rate of Customs duty subject to certain export obligations under the EPCG scheme, Export Promotion Capital Goods. Export linked duty free imports are also allowed.

·         Units in EPZ/FTZ and 100% Export oriented units can retain 50% of foreign exchange receipts in foreign currency accounts.

·         50% of the production of EPZ/FTZ and 100% EOU units is saleable in domestic tariff area.

Paper industry: Project Opportunities in Tamil Nadu

 

PROFILE:

Paper Industry in India is riding on a strong demand and on an expanding mood to meet the projected demand of 8 million tons by 2010 & 13 million tons by 2020. The Indian Paper Industry is a booming industry and is expected to grow in the years to come. The usage of paper cannot be ignored and this awareness is bound to bring about changes in the paper industry for the better. It is a well known fact that the use of plastic is being objected to these days. The reason being, there are few plastics which do not possess the property of being degradable, as such, use of plastic is being discouraged. Excessive use of non degradable plastics upsets the ecological equilibrium. The Paper industry is a priority sector for foreign collaboration and foreign equity participation upto 100% receives automatic approval by Reserve Bank of India. Several fiscal incentives have also been provided to the paper industry, particularly to those mills which are based on non-conventional raw material.

RESOURCES:

Tamil Nadu continues to be one of the forerunners in the production of paper and paper products. There are 74 paper mills in operation in Tamil Nadu. The total paper production was 3.7 lakh tonnes in 2005 06 which accounts for 17.30% share of the national production, next only to Andhra Pradesh.  As the country’s forest cover is much below the desired level, the Government of Tamil Nadu established TNPL in 1979 to manufacture newsprint and paper using bagasse (sugarcane waste) as the primary raw material. This is the largest paper mill in India with an installed capacity of 230,000 TPA. Tamil Nadu Newsprint and Papers Limited (TNPL) was established by the Government of Tamil Nadu to produce newsprint and writing paper using bagasse, a sugarcane residue.

GOVERNMENT POLICIES:

Several policy measures have been initiated in recent years to remove the bottlenecks of availability of raw materials and infrastructure development. To bridge the gap of short supply of raw materials, duty on pulp and waste paper and wood logs/chips have been reduced. In the year 1979, Government of Tamil Nadu established Tamil Nadu Newsprint and Papers Limited as a public limited company under the Companies Act, 1956. Commencing production in 1984, with the support of Government of Tamil Nadu, the company has made rapid strides and has emerged as the largest paper mill in India at a single location. With the on-going expansion plan to increase paper production capacity from the present 2.45 lakh tons to 4 lakh tons per annum, TNPL is poised to become a Rs.2000 crores company by 2011-12.

Cement Industry: Project Opportunities in Tamil Nadu

 

PROFILE:

India is the second largest producer of quality cement in the world. The cement industry in India comprises 139 large cement plants and over 365 mini cement plants. Industry's capacity at beginning of the year 2008-09 was 198.30 million tonne (MT) which increased to 219 MT at the close of the year. The initiatives provided by the Government of India to various infrastructure projects, road network and housing activities will provide required stimulus towards the growth of cement industry in India. Domestic demand for cement has been increasing at a fast pace in India & it has surpassed the economic growth of the country.

RESOURCES:

Tamil Nadu is a leading producer of cement in India. It has 13 major cement factories.  It is a home for leading brands in the country such as Chettinad Cements (Karur), Dalmia Cements (Ariyalur), Ramco Cements (Madras Cement Ltd.), India Cements (Sankakari, Ariyalur), Grasim etc. The production of cement in the State increased from 126 lakh tonnes in 2004-05 to 142.89 lakh tonnes in 2005-06 with a growth rate of 13.4% accounting for 10.08 % of cement production at the national level, occupying the 5th place.  However, it may be noted that, the cement production in the private sector has been showing an increasing trend whereas production in the public sector has decreased to 7.85 lakh tonnes from 8.06 lakh tonnes in the public sector for the corresponding period.

GOVERNMENT POLICIES:

Government policies have affected the growth of cement plants in India in various stages. The control on cement for a long time and then partial decontrol and then total decontrol has contributed to the gradual opening up of the market for cement producers. The prices that primarily control the price of cement are coal, power tariffs, railway, freight, royalty and cess on limestone. Interestingly, all of these prices are controlled by government. Cement industry consumes about 5.5bn units of electricity annually while one ton of cement approximately requires 120-130 units of electricity. Power tariffs vary according to the location of the plant and on the production process. The state governments supply this input and hence plants in different states shall have different power tariffs. Another major hindrance to the industry is severe power cuts.

 

Waste management: Project Opportunities in Andhra Pradesh

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Municipal Solid Waste (MSW) generation in Chennai, the fourth largest metropolitan city in India, has increased from 600 to 3500 tons per day (tpd) within 20 years. The highest per capita solid waste generation rate in India is in Chennai (0.6 kg/d). Chennai is divided into 10 zones of 155 wards and collection of garbage is carried out using door-to-door collection and street bin systems. The collected wastes are disposed at open dump sites located at a distance of 15 km from the city.  Recent investigations on reclamation and hazard potential of the sites indicate the need for the rehabilitation of the sites.  Chennai is the first city in India to contract out MSWM services to a foreign private agency- ONYX, a Singapore based company. The scope of privatization includes activities such as sweeping, collection, storing, transporting of MSW and creating public awareness in three municipal zones.  ONYX collects about 1100 Metric tons of waste from three zones per day and transports it to open dumps.

 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 4 of 231 | Total 2305 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 230 231   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Automatic Papad Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The Word "PAPPAD" is quite familiar with Indians. Pappad is a common Indian food normally taken with meals. Some people take it along with tea also. It is a food which is liked by people of all states, people doing all type of occupations. It is well within the reach of common people. Pappad can be exported to other countries and can earn valuable foreign exchange as people in other countries have also taken interest in this food item. Some time before pappads were made at home by the ladies and most of them know the process of making them. At present also some of the housewives are making these, but their number has decreased considerably. However, they used to make them for their captive uses only. Pappad's are of different types i.e. made from urad dal, potatoes, rice etc. However, process of making all of them is very simple and absolutely identifical except the formulations which may change according to one's taste. Pappad's may be made by using red or black pappers and their quantities may also be altered to make the product strong or light in chilly. As a result of the organised efforts of domestic and global players, the breakfast items have come now to include cereals, energy bars, fresh dairy products and fruit juices. Estimated at a modest Rs 2.5 bn, the market includes cornflakes, muesli, pancakes, oatmeal and porridge. It is growing fast not only because of macro factors, such as acceptance of packaged food and rising household incomes but also because companies have become innovative. The market is estimated to be growing annually up to 30%, and with modern retail providing new recipes of the contemporary products, Indian and Western, a strong wave of growth is anticipated. So any new entrants can venture in to this industry. Few Indian Major Players are as under:- Bikaji Marketing Ltd. Desai Brothers Ltd. Empire Spices & Foods Ltd. Madhur Industries Ltd. R C L Foods Ltd. Shri Mahila Griha Udyog Lijjat Papad Sunrise Spices Ltd.
Plant capacity: 75000 Kgs /AnnumPlant & machinery: Rs. 15 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 34 Lakhs
Return: 25.00%Break even: 74.00%
Add to Inquiry Add to Inquiry Basket

Sanitary Napkins - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Sanitary Napkin comes under Nonwoven fabrics which as a whole come under technical textile.Technical textiles are defined as textile materials and products used primarily for their technical performance and functional properties rather than their aesthetic or decorative characteristics. Thus Non woven Fabrics are broadly defined as sheet or web structures bonded together by entangling fibre or filaments (and by perforating films) mechanically, thermally or chemically. They are flat, porous sheets made directly from separate fibres or from molten plastic or plastic film. They are not made by weaving or knitting and do not require converting the fibres to yarn. Feminine hygiene (lady napkins) is hygiene absorbent products engineered to absorb and retain body fluid without causing any leakage. The user should always feel dry and comfortable. It consists of an absorbent pad sandwiched between two sheets of nonwoven fabric. Today, the global market for absorbent hygiene products is over US$ 50 bn (including wipes). The evolution of hygiene products in Europe and the North America has taken 4 to 5 generations. Feminine care was introduced over 100 years ago. Baby diapers were invented 60 years ago. Adult incontinence products appeared 30 years ago. As a whole establishing Sanitary Napkin Unit is one of the project which has good prospect for the entrepreneurs to invest. Few Indian Major Players are as under:- Carewell Hygiene Products Ltd. Godrej Consumer Products Ltd. Gufic Biosciences Ltd. Hindustan Unilever Ltd. Johnson & Johnson Ltd. Kimberly Clark Lever Pvt. Ltd. Procter & Gamble Hygiene & Health Care Ltd.
Plant capacity: 1296 Lakh Nos. /AnnumPlant & machinery: Rs. 103 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 980 Lakhs
Return: 33.00%Break even: 36.00%
Add to Inquiry Add to Inquiry Basket

TMT Bars - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Steel is a generic name for a group of ferrous metals which due to their abundance durability versatility and low cost are most useful metallic material known to mankind. Thermo Mechanical Treatment (TMT) process for reinforcement bars is opening up new vistas in composite RCC, the re-enforcing steel is the costliest constituent (30 To 40% Per Cu. M. of concrete). This cost can be substantially reduced by using higher grades of steel re-enforcing bars. The higher yield strength of re-bars lowers the steel requirement, which results in reduced cost of construction. In India, high strength re-bars of yield strength up to 500 N/sq. mm. are produced either by cold twisting or micro-alloying or a combination of both which adds considerably to the cost of the re-enforcement bars. In the production of TMT bars the carbon is restricted to below 0.20% for imparting better ductility and bend-ability and to ensure better weld-ability. The carbon equivalent of the steel is controlled by the addition of Manganese (from 0.50% to 1.0% depending on the grade of the TMT bar being produced. In case of production of corrosion resistant TMT bars, corrosion-resisting elements are suitably added in the steel. Global steel production has crossed the 1 billion ton mark due to an upturn in steel demand during the last few years on the back of recovery in the global economy. Global steel trade has now increased to around 350 MT. The industry though continues to be fragmented with top 5 players accounting for less than 20% of the total industry capacity. Global steel manufacturers are increasingly realizing the need to have alliances and consolidation activity has picked up all over the world during the last 2-3 years. Due to demand growth, it is a good project for entrepreneurs to invest & any entrepreneurs venture into this field will be successful.
Plant capacity: 30000 MT /AnnumPlant & machinery: Rs. 277 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 857 Lakhs
Return: 69.00%Break even: 25.00%
Add to Inquiry Add to Inquiry Basket

Rubber Compound Toys (using Plaster of Paris) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Toys are used by everybody in his child hood. Every house has few toys. Rubber toys are one of the cheaper and best substitutes of electronic toys, plastic toy and other type of toys. Two types of hollow rubber toys of various sizes can be made by plaster casting process depending on the type of rubber used viz. Hard and soft. These are used for entertaining children. The elasticity and resilience of natural and synthetic rubber products make them ideal for use in toys, sports and fitness applications. The rubber products have been custom compounded for use in slingshots, horse ties, turkey calls, exercise resistance bands, dog toys, fishing lures and more. Choose an existing product or contact us to create a custom rubber product with the ideal material and color for recreation application. The Indian toy industry is estimated at about 850 million US dollars and until now has generated only 0.5 per cent of the global market. The growth of around 15 per cent promises to rapidly raise this figure, especially in the context of the growing middle class and the increasing willingness to spend money on luxury goods. India itself has more than 800 toy manufacturers, exporters and suppliers, which means that 60 per cent of the market is handled by Indian manufacturers and foreign companies with subsidiaries in India. The Toy Association of India estimates that about 90 per cent of the Indian toy industry belongs to the non-organized sector. Any entrepreneurs venture into this field will be successful. Few Indian Major Players are as under:- Andhra Polymers Pvt. Ltd. Elgi Rubber Co. Ltd. Magnus Rubber Inds. Ltd. Precision Seals Mfg. Ltd. Sundaram Industries Ltd. Swastik Rubber Products Ltd. Thejo Engineering Ltd.
Plant capacity: 15 Lakh Pcs. /AnnumPlant & machinery: Rs. 48 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 299 Lakhs
Return: 24.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Thermocol Cups, Glass and Plates - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost & Revenue

Thermocol is formed by the synthesizing of spherical particles consisting of air (at a rate of 98%) contained within an infinite number of hollow cells. These cells, forming a structure of pellets fused together, give consistency and rigidity to the final product. The advantages are many: the product’s manufacturer requires very little energy, thereby allowing full weight to be given to ecological consideration. Of fundamental importance is the treatment with the vapor, which, as well as having a technical function during the manufacturing process, renders the product hygienic through sterilization. Thermocol is a good resister of cold and heat but since it is a petroleum product it dissolves in any solvent of petroleum. Foamed plastics materials have achieved a high degree for importance in the plastic industry. Foams can be made soft and flexible to hard and rigid. Expanded polystyrene is one of such foams. It may be used such as thermal insulation material; acoustic treatments shock protective packaging, etc. Its properties can be varied widely in manufacture to meet both general and specific demands. Today the demand on the global styrene market is on a gradual rise. The EPS and ABS demand rise is the key driver of the styrene market development. It is expected that the demand growth tempo will keep the significant indexes through the coming 2-3 years, supporting that way the styrene production and price in the foreseeable future. Polystyrene and Expandable Polystyrene Market is Expected to Grow at a Healthy Rate of 5.6% from 2010-2020. So any new entrants can venture in to this industry.
Plant capacity: Thermocol Cups : 85320 Th. Pcs. /Annum,Thermocol Glasses: 85320 Th. Pcs. /Annum,Thermocol Plates: 384000 Th. Pcs./AnnumPlant & machinery: Rs. 244 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 496 Lakhs
Return: 27.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Activated Carbon from Coconut Shell

Activated carbon in any form of carbon shows high absorptivity for gases, vapours and colloidal solids in either the gas ion or liquid phase. It is available in many forms such as pellets, granules and in powder form. Activated carbon is very important chemical has wide application and employed by numerous industries which require absorption of certain gases and vapours in purification, in catalytic chemical reactions, decolorisation of vegetable oil and sugar solutions. Activated carbons have a large surface area, liquid phase activated carbons are light in weight, fluffy powder while gas phase activated carbons are hard and are in the form of pellets. Almost any carbonaceous raw material can be used for the manufacture of activated carbon. Wood peat and lignite are commonly used for the decolourizing materials. Bone char made by calcining bones is used in large quantity for sugar refining. Nutshells coal, petroleum coke, and other residues forms are used for absorbent products. There is a considerable scope in India for the manufacture of activated carbon from the cashew nut shells. The global activated carbon industry is estimated to be around 1.1 million metric ton. The U.S is the largest market, which will also pace global growth based on anticipated new federal regulations mandating mercury removal at coal-fired power plants. The activated carbon industry consists of more than 50 units spread countrywide most of which are in small-scale industrial sector (SSI Sector). Of the total number of units in operation, only 10 to 12 units cater to the national market while the other serve the local or regional markets. In general activated carbon is manufactured in the northern region from wood charcoal (mostly made from pinewood) whereas in the southern region, it is made from charcoal of the hard shell of coconut. The total installed capacity of the industry is presently estimated at about 40,000 tons per annum and production is put at around 30-35,000 tons, which includes purified regenerated carbon. Any entrepreneurs venture into this field will be successful.
Plant capacity: 1500 MT/AnnumPlant & machinery: Rs. 166 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 356 Lakhs
Return: 24.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Pan Chutney - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

The Betel (Piper betle) is the leaf of a vine belonging to the Piperaceae family, which includes pepper and kava. It is valued both as a mild stimulant and for its medicinal properties. Betel leaf is mostly consumed in Asia and elsewhere in the world by some Asian emigrants, as betel quid or paan, with or without tobacco, in an addictive psycho-stimulating and euphoria-inducing formulation with adverse health effects. The betel plant is an evergreen and perennial creeper, with glossy heart-shaped leaves and white catkin. Betel chewing is firmly embedded in the traditions of South-East Asia and enjoyed, even revered, on several levels. The most obvious reason as to why people chew betel is for social affability, in a way similar to westerners drinking coffee together. The betel quid is also used as a medicine to cure a variety of illnesses ranging from headaches to skin infections. Betel is also believed to be a powerful link in contacting supernatural forces and as such is intricately entwined with the rites of animistic worship which give it magical qualities. There are so many flavored pan chutney which has smoothly accepted by Indian people due to their variable tastes. Many dried fruits are used to make this like mango, pineapple, strawberry, saffron, khus etc which gives a unique taste to it and makes it attractive and addictive to the people fond of paan. The markets of pan chutney are growing more in India and it has ample scope to take the attention of paan lovers for more sell. Some companies like Gopal, Minar, Meenakshi are leading with that item and they are expecting more growth in near future with lots of prospects. As a whole it is a good project for entrepreneurs for investment.
Plant capacity: 30 Lakh Bottles/AnnumPlant & machinery: Rs. 62 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 332 Lakhs
Return: 28.00%Break even: 41.00%
Add to Inquiry Add to Inquiry Basket

Spices (100 % EOU)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Spices which are basically plant products, have a definite role to play in enhancing the taste flavour, relish or piquancy of any food; most of the spices are fragrant, aromatic & pungent. They comprise seeds, bartes, rhizamer, leaves fruits and other parts of plants, which belong to varigated species and genera since time immemorial, India in renamed to be the wave of spices. Most important spices like black pepper (king of spices) cardamom (queen of spices), ginger, chillis and turmeric, which are produced in India import it great reputation, and these constitute. In the list of spices, clove, nutmeg, cinnamon and cassia are known as tree spices, however, spices like fennel, fenugreek, garlic, onion, coriander, cumin, vanilla, saffron; etc. Now a day’s use of spice as ground form is changed towards in the liquid form. It is actually use of spice oil. Spicy oil drops are so much more active rather than ground powder. Ground powder is much more used in compare to oil drops. Oil drops are basically essential aromatic oils, which has very good specific spicy flavour. For Export Oriented Unit, should be quality conscious. Laboratory should be cleaned. There is no adulteration in the product; product should be totally microbial free. Quality of the products and factory premises should satisfy I.S.O standard. There is no other country in the world that produces as many kinds of spices as India. India grows over 50 different varieties of spices. The total production is around 2.7 million tonnes. Of this, about 0.25 million tonne (8-10 per cent) is exported to more than 150 countries. India holds a prominent position in the world spice production. It commands a formidable position in the world spice trade with 48 per cent share in volume and 44 per cent in value. Thus, it is a good project for entrepreneurs to invest. Few Indian Major Players are as under:- A V T Mccormick Ingrediants Pvt. Ltd. A V Thomas International Ltd. Aarkay Food Products Ltd. Bhagat International Pvt. Ltd. Chordia Food Products Ltd. Complete Spice Solutions India Ltd. Devon Foods Ltd. Dharampal Satyapal Ltd. Eastern Overseas Ltd. Empire Spices & Foods Ltd. Global Green Co. Ltd. Global Natural Products Ltd. Gokul Agro Inds. Ltd. Harmony Spices Ltd. Indana Spices & Food Inds. Ltd. Indian Chillies Trading Co. Ltd. Indian Products Ltd. Jagat Industries Ltd. Kedar Spices Ltd.
Plant capacity: 6 Lakh Pouches/AnnumPlant & machinery: Rs.14 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 44 Lakhs
Return: 28.00%Break even: 68.00%
Add to Inquiry Add to Inquiry Basket

Card & Gray Board from Pulp and Waste Paper - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Card Board and Grey Board are important grades of paper boards. The importance of paper board as an essential commodity is constantly increasing with the expansion of education among the people. Further, in a progressive society, the consumption of paper is closely linked to its economic, social and cultural activities. The consumption of card board, grey board, etc. in for various purposes such as, for making cartons for medicines, for pharmaceutical packagings, for making boxes for shoes, hosiery and other items for book-binding, for making registers for flat files, for sale of textile goods etc. Card Board & Grey Board itself in a superior packaging material and due to rapid industrialization is in very good demand. Grey board is a homogeneous board made usually of mixed waste paper with or without screenings and pulp on a board machine. Grey board is used where stiffness rather than printability is required. Plenty of raw materials for making of the boards are available in India. The world consumption of paper and paperboard is estimated at over 300 mn tonns a year. It is constituted broadly of 30% of cultural papers (writing and printing), 14% of newsprint, and the balance of kraft and packaging paper including paperboards. The Indian production is about 2 to 3% of the global total. The overall value of the market is estimated at Rs 250 bn. In volume terms, the segment is presently estimated at over 6.9 mn tonne. In India, the cultural varieties account for over 40% of the production and speciality papers including coated papers for about 8%. This leaves about less than half for kraft and boards if the newsprint varieties are excluded. The newsprint takes over a million tonne or about 15% of the total. Due to demand growth, it is a good project for entrepreneurs to invest.
Plant capacity: 1500 MT/AnnumPlant & machinery: Rs. 58 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 177 Lakhs
Return: 24.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

India Emerging Business Opportunities: Cold Chain Sector (Why to Invest, Project Potential, Core Financials, Market Size & Industry Analysis)

Often termed as the sunrise sector, cold chain logistics hold immense growth potential in India. Rising Indian Population, mounting consumer incomes and changing preferences have led to increased focus on food security and health services. The demand for processed food has also risen sharply necessitating the support from efficient cold chain logistics of the country. Responding to the high growth opportunities in the cold chain logistics sector, Niir Project Consultancy Services has released a new research report titled ‘India Emerging Business Opportunities: Cold Chain Sector (Why to Invest, Project Potential, Core Financials, Market Size & Industry Analysis)’ which identifies cold chain sector as a promising & lucrative investment option. The report classifies the sector after scrutinizing the various aspects like value drivers of the sector, the regulatory environment and prevalent subsidies, potential buyers, present players and the project details. While expanding a current business or while venturing into new business, entrepreneurs are often faced with the dilemma of zeroing in on a suitable product/line. And before diversifying/venturing into any product, they wish to study the following aspects of the identified product: • Good Present/Future Demand • Export-Import Market Potential • Raw Material & Manpower Availability • Project Costs and Payback Period We at NPCS, through our reliable expertise in the project consultancy and market research field, have identified cold chain project which satisfies all the above mentioned requirements and has high growth potential in the Indian markets. The report, at first, discusses the present scenario and components of the industry as a whole covering the structure, segmentation and components. And then moves on to elaborately illustrate the factors that make case for investing in the sector. Industries like organized food retail and QSR (Quick Service Restaurants) owe much of their growth to the cold chain sector. An effective cold chain infrastructure forms the very backbone of the food industry in India. In the view of rising population and appalling healthcare status, ensuring food security to every Indian and easy availability of medicines has scored as a top priority in government agenda. The sector has effervescent future with the much revered government backing, apparent growth in user industries and favorable demographics of the country. Elaborating on the government support, the report disseminates information on various subsidies and government schemes applicable for cold chain development in the country followed by the outlook of the sector. The report further navigates through the key player information of the sector. It includes company profiles of players like Kausar India, Snowman Logistics and Fresh & healthy Enterprises along with a snapshot of their financials and contact details of other players as well. Now, the part which forms the core of the report is the ‘Project Details’ segment. It includes project details like list of machinery and basic project financials. Project financials like plant capacity, costs involved in setting up of project, working capital requirements, projected revenue and profit are listed in the report. Indian market is evolving with changing lifestyles, rising urbanization and growing disposable incomes which will be the key benefactors of growth in cold chain user industries like Food service industry, processed food industry and organized retail industry. Additionally mounting government endeavors towards reducing food wastage and penetrating healthcare in deep corners of the country will help in strengthening cold chain infrastructure in India. The cold chain sector in India is still in the nascent stage with enormous growth potential on the back of climatic diversification and geographically vast size of the country. Indian cold chain sector was estimated to be at INR 245 billion in 2013 and we anticipate it to cross INR 600 billion mark in the next 4 years. Reasons for buying the report: • This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, market potential of the product and reasons for investing in the product • This report provides vital information on the product like its definition, characteristics and segmentation • This report helps you market and place the product correctly by identifying the target customer group of the product • This report helps you understand the viability of the project by disclosing details like machinery required, project costs and snapshot of other project financials • The report provides a glimpse of important subsidies applicable on the industry • The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decisions Our Approach: • Our research reports broadly cover Indian markets, present analysis, outlook and forecast for a period of five years. • The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players • We use reliable sources of information and databases. And information from such sources is processed by us and included in the report Table of Contents 1 OVERVIEW 1.1 Definition 1.2 Components 1.3 Structure 1.4 Segmentation 2 POTENTIAL BUYERS 3 REASONS FOR INVESTING 3.1 Expanding Organized Retail 3.2 High Food Wastage 3.3 Numerous User Industries 3.3.1 QSR industry 3.3.2 Pharmaceutical Industry 3.3.3 Processed Food Industry 3.4 Government Support 3.5 Favorable Demographics 3.6 Growing Affordability 4 REGULATORY ENVIRONMENT 4.1 Subsidies & Incentives for Investment in Cold Chains 4.2 Government Schemes & Benefits 5 PRESENT PLAYERS 5.1 Company Profiles 5.1.1 Kausar India Ltd 5.1.2 Snowman Logistics Ltd 5.1.3 Fresh & Healthy Enterprises Ltd 5.2 Contact Details 7 OUTLOOK 8 PROJECT DETAILS 8.1 List of Machinery 8.2 Project Financials 9 ABOUT NPCS 10 DISCLAIMER List of Figures & Tables Figure 1 Cold Chain Figuration Figure 2 Key Steps Involved in a Cold Chain Figure 3 Indian Cold Chain Industry- Components Figure 4 Indian Cold Chain Industry- User Segments Figure 5 Indian Cold Chain Industry- User Industries Figure 6 Indian Food Retail Industry- Structure Figure 7 Food Wastage in India across Various Categories (As a % of Total Production) Figure 8 QSR Industry in India- Market Size (2011-17, In USD Billions) Figure 9 Indian Pharmaceutical Industry- Market Size (2012-17, In INR Billions) Figure 10 Cold Storage Capacity (As a % of Total Food Production) Figure 11 Indian Population Distribution by Age Figure 12 Indian Population- Rural & Urban (In Crores) Figure 13 India's Annual Per Capita Income (2008-14, In INR) Figure 14 Indian Middle Class Population (Current-2026) Figure 15 Indian Cold Chain Industry- Market Size (2009-17, In INR Billions) Table 1 Presence of Key Food Retailers in India- Total Stores Table 2 Level of Food Processing Over Various Food Segments Table 3 Kausar India Ltd- Financial Summary (2010-12, In INR Millions) Table 4 Snowman Logistics Ltd- Financial Summary (2010-12, In INR Millions) Table 5 Fresh & Healthy Enterprises Ltd- Financial Summary (2011-13, In INR Millions) Table 6 Contact Details of Key Players in Cold Chain Segment Table 7 Cold Storage- List of Machinery Table 8 Cold Chain Plant- Capacity Table 9 Cold Chain Plant- Fixed Capital Requirements Table 10 Cold Chain Plant- Monthly Working Capital Requirements Table 11 Cold Chain Plant- Total Cost of Project Table 12 Cold Chain Plant- 5 Year Profit Analysis (INR Million)
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 4 of 231 | Total 2305 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 230 231   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top