Google Search

Search

Already a Member ?

Best Business Opportunities in Mizoram- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mizoram is a state of India. It is located in the northeastern part of the country and is bounded by Myanmar (Burma) to the east and south and Bangladesh to the west and by the states of Tripura to the northwest, Assam to the north, and Manipur to the northeast. The capital is Aizawl, in the north-central part of the state. Agriculture is the dominant economic activity of Mizoram, engaging more than two-thirds of the workforce. Two types of agriculture are practiced: terrace cultivation, in which crops are planted on relatively permanent, graduated terraces on the sides of hills and mountains to conserve water and reduce soil loss; and shifting agriculture, in which tracts called jhum are cleared by burning, cultivated for a limited period of time. Mizoram has a population of 1,091,014 with 552,339 males and 538,675 females. This reflects a 22.8% growth since 2001 census; still, Mizoram is second least populated state of India. The sex ratio of the state is 976 females per thousand males, higher than the national ratio 940. The density of population is 52 persons per square kilometer. Mizoram gross state domestic product (GSDP) in 2011-2012 was about 6991 crore (US$1.1 billion). The state's gross state domestic product (GSDP) growth rate was nearly 10% annually over 2001-2013 period. With international borders with Bangladesh and Myanmar, it is an important port state for Southeast Asian imports to India, as well as exports from India.

TOURISM

Mizoram, the Land of the Highlanders, is sandwiched between Myanmar, Bangladesh and the states of Tripura, Assam and Manipur. The rivers, peaks, plains and the lakes are the treasures of Mizoram. It is full of high ranges running from north to south covered by greenery throughout the year. The Mizoram State Government begins to recognize tourism as an important sector of the economy which needs to be developed for greater income generation. More emphasis on sustainable eco-tourism, adventure tourism, village tourism and rural tourism would bring in high - value tourism. With the increase of tourist the need for budget hotels has been acutely felt.

Tourism has emerged as an important economic activity and one of the fastest growing industries in the world. Globally, Tourism is the fastest growing industry and in terms of value, it comes third only after petroleum and Transport Industry.

As such, Tourism Department in Mizoram is also one of the fastest growing Departments in Mizoram. The Department has achieved these objectives by constructing Tourist Lodge, Tourist Resort and other Tourist amenities in difference places of Mizoram through liberal financing of Ministry of Tourism, Government of India.


INDUSTRIAL POLICY

The Industrial Policy of Mizoram State was first notified on 15.3.1989 to give direction to the strategy for Industrial development of the State. It laid stress on reducing shifting cultivation by encouraging a shift from primary to secondary sectors while protecting the Socio-Cultural and ethnic identity of the indigenous enterprise of Mizoram.

In view of the National Industrial Policy which laid special emphasis for the development of Industries in the North Eastern Region, the Govt. of Mizoram had notified new Industrial Policy 2000 for accelerated Industrial and Economic development of the State. The Government had adopted the approach for identification of thrust areas and promoting them with fiscal and other incentives packages. Broad policy of Foreign Direct Investment (FDI) and Investment from outside the State has been adopted on Joint venture (JV) mode to safeguard the interest of the tribal population of Mizoram. Various administrative support system and market support system are also announced. The Govt. of Mizoram is mandated in giving sustainable employment and introducing better utilization of land by introducing New Land Use Programme (NLUP).

OBJECTIVES

•        To create infrastructure facilities, provide incentives and marketing as well as technical support to industries.

•        To provide skill development and training for educated youth to develop entrepreneurial skills and make them self-employed.

•        To create employment opportunities particularly to the vulnerable section of the society and people in rural area, ensuring inclusive development.

•        To reduce sectoral and regional imbalance in the industrial development in the State by promoting Industries under all sectors.

•        To create proper linkage of processing Industries with the farm produce of agriculture, horticulture, forest and livestock’s.

•        To attract investment in the state.

IDENTIFICATION OF THRUST AREAS

Thrust will be given for those industries based on value addition of locally available resources. Special incentives will be formulated for speedy development of industrial units engaged in any of the following thrust sector Enterprises.

•        Forest-based Industries

The vast bamboo and other forest resources of Mizoram will be optimally harvested for setting up of Industry for manufacturing of various high value bamboo and other forest based products.

•        Food Processing Industries

Primary production of various food items, whether agricultural based, horticultural or livestock based will be linked with processing Industries.

•        Handloom Industries

Handloom sector will continue to receive serious attention of the Govt. Utmost importance will be given for improving quality product by introducing improved design, packaging, branding.

•        Handicraft Industries

The traditional skill of Mizo people will be upgraded and diversified for market competitiveness of handicraft products.

•        Plantain fibre and hill brooms

The Govt. will encourage value addition of hill-brooms. The flow of raw and unprocessed broom outside the state will be discouraged by giving attention towards value addition to help local industry.

•        Textile related industries

Bulk production of readymade garments will be encouraged as this sector is having good potential for market outside the state and export.

•        Animal Feed and poultry feed Industries

The Government is giving thrust towards having sufficient meat and meat products for which farming has been encouraged.

INCENTIVES

The incentives offered under the Rules for the grant of incentives/subsidies under the Industrial Policy of Mizoram State are-

•        Subsidies on the cost of Project Report 

•        Land subsidy

•        Factory rent subsidy

•        Manpower development subsidy

•        Interest subsidy

•        Power subsidy

•        Subsidy on Power Line 

•        Subsidy on Power Generating set

•        State Transport subsidy on Plant and Machinery 

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 196 of 199 | Total 1985 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 196 198 199   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

IV Fluids (BFS Technology)

Intravenous fluids are fluids which are intended to be administered to a patient intravenously, directly through the circulatory system. These fluids must be sterile to protect patients from injury, and there are a number of different types available for use. Many companies manufacture packaged intravenous fluids, as well as products which can be mixed with sterile water to prepare a solution for intravenous administration. Intravenous fluids can be broken into two broad groups. Crystalloids such as saline solutions contain a solution of molecules which can dissolve in water. When crystalloids are administered, they tend to create low osmotic pressure, allowing fluid to move across the blood vessels, and this can be linked with edema. Colloids contain particles which are not soluble in water, and they create high osmotic pressure, attracting fluid into the blood vessels. Blood is an example of a commonly administered intravenous colloid. There are four main ranges of application of highly specialized intravenous infusion solutions: • Treatment of discarded water and electrolyte metabolism, especially in severe cases. • Therapy of acid base in balances. • The volume substitution and volume replacement in surgery of accident victim suffering blood loss. • Paratral nutrition for severally ill and post-operative patients. The global intravenous solutions market size is expected to reach USD 18.9 billion by 2028, the market is expected to expand at a CAGR of 7.9% from 2021 to 2028. The growing incidence rate of chronic diseases such as cancer, increase in the number of premature births, and shortage of I.V. solutions in the U.S. are some of the key factors expected to drive the market. One of the prime areas wherein intravenous (IV) fluids find usage is severe dehydration. Severe dehydration is seen in diseases such as diarrhea, resulting in the depletion of fluids from the body. According to the WHO, in 2017, diarrhea was the second leading cause of death in children under 5 years of age with around 5,25,000 lives lost each year. Intravenous (IV) fluids can play a key role in the treatment and prevention of deaths caused due to the dehydration/fluid loss associated with diarrhea. Other cases where intravenous fluids find application include surgeries and emergency situations.
Plant capacity: IV Fluids (500 ml Size Bottle) 50,000 Bottles per dayPlant & machinery: 3449 Lakhs
Working capital: -T.C.I: Cost of Project: 4089 Lakhs
Return: 20.00%Break even: 41.00%
Add to Inquiry Add to Inquiry Basket

Manufacturing of MS Fasteners (Screws, Nut and Bolts)

Fastener may be defined as any device, method or component used to hold or FASTEN two or more engineering components together. Fasteners may be classified into groups and sub-groups according to the functions they perform. Probably the main division is into: a. Detachable fasteners (e.g. nut and bolt, screw, etc.); b. Non-detachable fasteners (e.g. rivet, weld, adhesive). Fastener Material can be important when choosing a fastener due to keeping in view the strength, brittleness, corrosion resistance, galvanic corrosion properties. Cost of course an important factor which determines which materials to choose from. ? A screw is a broad category of mechanical fastener with a threaded shaft, designed to screw into a part. This includes wood screws and self-tapping screws, which have a tapered shaft with sharp threads designed to cut a mating thread in the part to which they are fastened. It also includes machine screws, which much more closely resemble bolts, but their entire shaft is normally threaded. Nuts and Bolts are most commonly used items in the family of industrial fasteners and their demand is fast increasing due to expansion of industries in the country. Bolt is a piece of metal rod whose one end is upset and at the other end threading is done. Nut is a device which rolls on bolt threads. In nuts, internal threading is done while bolts bear external thread. Screw, demonstrate their true merit in the movements, assembly etc, of wooden components. Screws are most popular as fasteners which assemble, or join parts together to be made into a complete unit. Few Indian Major Players 1. Adinath Forging Pvt. Ltd. 2. Agarwal Bolts Ltd. 3. B G Fastening & Engg. Inds. Pvt. Ltd. 4. Deepak Fasteners Ltd. 5. G S Auto International Ltd. 6. Indian Fasteners Ltd. 7. J C Fasteners Ltd. 8. Lakshmi Precision Screws Ltd. 9. Mahalaxmi Fasteners Pvt. Ltd.
Plant capacity: Zinc Coated High Tension Bolt (Size M5 to M20)16 MT Per Day Zinc Coated High Tension Screw (Size M5 to M20) 8 MT Per Day High Tension Nut (Size M5 to M20) 8 MT Per DayPlant & machinery: 116 Lakhs
Working capital: -T.C.I: Cost of Project: 758 Lakhs
Return: 29.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Disposable Plastic Syringes

Disposable Syringes are made of plastic material and are used in the field of medical and veterinary science. Due to their availability in sterilized condition, ready to use, and cost effectiveness, disposable syringes are fast replacing the age-old glass syringes. The constantly increasing use of this type Syringe indicates its importance which is based mainly on the advantages it offers regarding cost and hygienic applications. The manufacture of plastic syringes has been developed to such a degree that the products now satisfy the requirements and standards set by Hospital and physicians. At the same time they offer the best possible technique of application to the physician and the highest possible degree of safety to the patient. Disposable syringes commonly are used in modern medicine for the injection of drugs and vaccines or for the extraction of blood. Among the common uses of disposable syringes are the injecting of insulin by a diabetic person and the administering of a local anesthesia by a dentist. Disposable syringes sometimes are used for drawing blood samples. They allow greater precision than evacuated tube systems, so syringes used together with butterfly needles often are favored when drawing blood from children, from adults who have thin blood vessels or from patients who are suffering from muscle spasticity or nervous tremors. They also are used when blood is being drawn from a vessel very close to the skin, such as those in the wrists and hands. Disposable syringes currently control the largest market share in terms of revenue in Indian syringes and needles market. As per estimates, Indian disposable syringes market is expected to grow at a CAGR of 15% till 2021 and maintain its market share position even in 2020. The medical devices market in India is dominated by imported products, including products manufactured using imported material, which comprises approximately 75% of the total sales. The domestic companies are largely involved in manufacturing low-end products for local and international consumption. The Syringes and Needles form a significant part of this manufacturing and 60% of the manufactured Syringes and Needles are exported.
Plant capacity: Disposable Plastic Syringes with Needles 1 ml Size each Packed in Polypack: 62,500 Nos Per Day Disposable Plastic Syringes with Needles 2 ml Size each Packed in Polypack: 62,500 Nos Per Day Disposable Plastic Syringes with Needles 5 ml Size each PackePlant & machinery: 441 Lakhs
Working capital: -T.C.I: Cost of Project: 2149 Lakhs
Return: 34.00%Break even: 40.00%
Add to Inquiry Add to Inquiry Basket

Investment Opportunities in Production Business of Xanthan Gum (Food and Oil Drilling Grade)

Introduction: Xanthan gum is one of the most versatile food additives available, working in a variety of viscosities, temperatures, and pH levels. It's simple to use, has no taste, and works well in general. It can also thicken liquids at very low concentrations: 0.1 percent by weight can produce a thick liquid, and 0.5 percent by weight can produce a thick paste (this is why it is best to weigh out xanthan gum with a digital scale rather than use volumetric measurements). Traditional thickeners, such as flour, often require far higher amounts to achieve the same results. The amount important because the higher the proportion of thickening in the whole combination, the more likely it is to impart an unpleasant texture and impede flavour. Xanthan gum is a polysaccharide, or sugar, produced by a bacteria called Xanthomonas campestris during the fermentation process. Xanthomonas campestris infects a variety of cruciferous plants, including cabbage, cauliflower, and Brussels sprouts, and causes diseases including black rot and bacterial wilt. Uses of Xanthan Gum: Xanthan gum is a common food additive that can be found in a variety of foods and beverages. The bacteria strain Xanthomonas campestris produces this thickening, stabilising, emulsion, and suspension agent by fermenting simple carbohydrates. Industrial Products: Because of its ability to resist a wide range of temperatures and pH levels, attach to surfaces, and thicken liquids while maintaining good flow, xanthan gum is utilised in a wide range of industrial products. Personal Care Products: Many personal care and beauty products contain xanthan gum. It enables these items to be thick while still allowing them to flow freely out of their containers. It also enables the suspension of solid particles in liquids. Other Health Benefits: Other potential health benefits of xanthan gum have been connected, albeit these are unlikely to occur without supplementation. 1. Lower your cholesterol levels 2. Loss of weight 3. Anti-cancer properties 4. Increased consistency 5. Makes liquids thicker 6. Saliva replacement Market Outlook: The global xanthan gum market was valued at USD 897.15 million in 2020, rising to USD 963.61 million in 2021, with a compound annual growth rate (CAGR) of 7.74 percent from 2020 to 2026, reaching USD 1,403.74 million in 2026. The global xanthan gums market is being driven by the expansion of end-user industries. Consumption of food and cosmetics is increasing as disposable income rises, resulting in increased demand for xanthan gums. The usage of xanthan gum-containing convenience foods has also expanded dramatically in recent years. In Asia Pacific, rising population and a growing economically active population are driving up demand for on-the-go foods. Increased government expenditure in healthcare is raising pharmaceutical sales all around the world, which is propelling the xanthan gums market forward. The xanthan gum industry is also being driven by rising demand for gluten-free meals. The availability of guar gum as a substitute is one of the most significant constraints for the xanthan gum business. Another stumbling block for the xanthan gum business is that it is incompatible with persons who suffer from specific sensitivities. However, the health risks associated with its usage, such as intestinal enlargement and delayed sugar absorption, are limiting the demand. A key problem for the xanthan gum market is the availability of replacement goods such as guar gum and cassia gum. Key Players:- 1. Danisco 2. Cargill 3. Pfizer Inc 4. Jungbunzlauer 5. Archer Daniels Midland (ADM) 6. CP Kelco 7. Fufeng Group Company Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Manufacturing Business of Lithium Ion Battery. Investment Opportunities in Li-ion battery Assembling Industry.

A lithium-ion (Li-ion) battery is a high-performance battery that employs lithium ions as a key component of its electrochemistry. Lithium atoms in the anode are ionized and separated from their electrons during a discharge cycle. Lithium ions travel from the anode through the electrolyte to the cathode, where they recombine with their electrons and become electrically neutral. Between the anode and the cathode, the lithium ions are tiny enough to pass through a micro-permeable separator. Li-ion batteries can have a very high voltage and charge storage per unit mass and volume, thanks in part to lithium's tiny size (third only to hydrogen and helium). Surveillance or Alarm Systems in Remote Locations: Because of their extended life, small size, and lack of self-discharge when your system is inactive, rechargeable lithium batteries are perfect for remote monitoring systems. Lithium batteries have a 10 times lower self-discharge rate than lead-acid batteries, making them excellent for circumstances where they aren't used continuously. Personal Freedom with Mobility Equipment: For persons with mobility issues, modern technology has made life easier. Many people rely on trustworthy mobility equipment to live an independent life, from electric wheelchairs to stair lifts. Lithium batteries are good for mobility equipment because they may be customized in size, have a longer life lifetime, charge quickly, have a low self-discharge rate, and have a longer run time. Portable Power Packs That Eliminate Downtime: Lithium-ion rechargeable batteries are well-known for powering our smartphones and the most recent lightweight laptop computers. Lead-acid batteries are heavier and smaller than lithium batteries. They can also withstand movement and temperature fluctuations while maintaining power supply. Market Outlook: The global lithium-ion battery market was worth $36.7 billion in 2019 and is expected to reach $129.3 billion by 2027, with a CAGR of 18.0% between 2020 and 2027. A lithium-ion (Li-ion) battery is a rechargeable battery that uses lithium ions as one of its electrochemical components. The demand for smartphones and other electronics devices, as well as the rise in electric cars, are some of the primary reasons driving the global lithium-ion battery market. The implementation of strict government measures to reduce rising pollution levels is projected to boost market growth even further. The electrical and electronics segment contributed the most to the market's growth. Because of their longer service life and high energy density, lithium-ion batteries are primarily utilised in smartphones, tablets/PCs, UPS, and a few other sorts of electronic equipment. Key Players:- 1. Amara Raja Batteries Ltd. 2. Bharat Electronics Ltd. 3. Carborundum Universal Ltd. 4. Eon Electric Ltd. 5. Exide Industries Ltd. 6. H B L Power Systems Ltd. 7. Luminous Power Technologies Pvt. Ltd. 8. Okaya Power Pvt. Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

A-2 Cow Milk Processing (Milk, Butter, Ghee & Paneer)

Milk is the most important source of protein and is consumed by people all over the world. Milk is readily available as a raw product from a range of dairy farms, and it is treated to boost the variety of nutrients. Heat treatments, pasteurisation, homogenization, and other milk processing operations are performed or handled by milk processing plants, which include a variety of milk processing equipment. Cows produce A1 milk and A2 milk, which are two different types of milk. A2, commonly known as desi cow milk, enhances overall health and nutritional value by removing digestive discomfort. According to studies, desi cow milk is healthier than A1 milk. A2 milk is a natural, antibiotic-free alternative to industrial milk, which contains stress hormones and antibiotics. Similarly, desi cow milk is wholesome and chemical-free. Cow milk derived from Desi cows with a hump on their back is known as A2 milk. Furthermore, desi cow milk has A2 beta protein, which makes it healthier and more nutritious than conventional cow milk, which contains A1 protein. Drinking desi cow milk helps to keep your bones healthy. However, due to its high calcium and other essential minerals content, desi cow milk aids in the development of strong bones. Furthermore, proteins are available, making them an important part of the diet and ensuring the health of bones and teeth. Drinking milk strengthens bones as the density of bone mineral grows with age. The global A2 milk market was worth $1,129.7 million in 2019 and is expected to grow to $3,699.2 million by 2027, with a CAGR of 15.8% from 2021 to 2027. The liquid A2 milk segment held the largest proportion of the market in 2019. A2 milk is a type of cow's milk that includes mostly A2 beta casein protein and is free of A1 beta casein protein. It comes from cows of specific breeds such as guernsey, jersey, Holstein, brown swiss, and others. The key factor of driving market expansion is increasing consumer health awareness, which leads to greater consumption of A2 milk, as well as growing the range of A2 milk products, which will drive demand for the global A2 milk market. Few Indian Major Players 1. Abis Hatchery Pvt. Ltd. 2. Bhagyalaxmi Dairy Farms Pvt. Ltd. 3. Creamy Foods Ltd. 4. Dempo Dairy Inds. Ltd. 5. Glamorous Properties Pvt. Ltd. 6. Goga Foods Ltd. 7. Heritage Foods Ltd. 8. Indapur Dairy & Milk Products Ltd. 9. India Dairy Products Ltd.
Plant capacity: A-2 Milk (1 Ltr Tetra Pack)2,250 Kgs per day Butter (100 & 500 gms Pack)46 Kgs per day Paneer (4 Pcs or 1 Kgs Pack) 143 Kgs per day Ghee (1 Kgs Tetra Pack) 40 Kgs per dayPlant & machinery: 19 Lakhs
Working capital: N/AT.C.I: Cost of Project: 484 Lakhs
Return: 25.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Top Most Profitable Startup Business Idea of A2 Cow Milk Processing. Incredible Benefits of A2 milk Products.

Cows with solely the A2 beta casein protein produce A2 cow milk, commonly known as Desi Cow milk. Cow Milk comes in two varieties of beta-casein proteins to make things easier. A1 and A2, which differ by a single amino acid, are the proteins in question. A2 milk is produced by the majority of dairy cattle in Asia and Africa. When it comes to producing high-quality A2 milk, our Indian breeds such as Gir, Sahiwal, Kankrej, Rathi, and Hariana are the best. Milk contains a variety of nutrients such as lipids, vitamins, proteins, and minerals that are required by the human body in a variety of biological activities. Protein is derived from these diverse nutrients and is used for a variety of reasons, including the production of enzymes, hormones, muscles, and bone strength. Whey and casein are the two main proteins found in milk. Casein is found in roughly 80% of cow's milk and contains all of the essential amino acids. A1 beta casein and A2 beta casein are two forms of casein proteins found in conventional cow's milk. The opioid peptide beta-casomorphin-7 is released during the digestion of A1 beta-casein. This is one of the main reasons why A2 milk is considered more resilient than normal milk. Benefits of A2 Cow Milk: It could help keep blood pressure healthy. Elevated triglyceride and cholesterol levels are frequently the cause of high blood pressure. You can potentially lower your cholesterol levels by consuming more omega-3 fatty acids, such as those found in A2 milk. The potassium in A2 milk is also good for your blood pressure. It could help your mood. Vitamin D is important for mood disorders such as seasonal affective disorder (SAD). People with SAD may notice a reduction in symptoms if they consume vitamin D-rich foods, such as A2 milk. It could strengthen your immune system. Vitamin A is essential for maintaining your immune system's strength, and its most commonly found in animal products like A2 milk. Increased vitamin A intake increases immune system cell responsiveness and control. It could help eyes stay healthy. Vitamin A is important for the health of the retinas and corneas. A2 milk contains vitamin A, which may aid with eye health. Regularly drinking milk as part of a well-balanced diet may aid in the prevention of cataracts and the maintenance of clear vision. Market Outlook: The global a2 milk market was worth $1,129.7 million in 2019 and is expected to grow to $3,699.2 million by 2027, with a CAGR of 15.8% from 2021 to 2027. The liquid a2 milk segment held the largest proportion of the market in 2019. A2 milk is a type of cow's milk that includes mostly a2 beta casein protein and is free of a1 beta casein protein. It comes from cows of specific breeds such as guernsey, jersey, Holstein, brown swiss, and others. Demand for dairy products such as ghee, butter, cheese, and others, on the other hand, has increased exponentially. Manufacturers might see this as an opportunity for market expansion and growth through product variety and innovation. There has been an increase in demand for digestive-friendly functional beverages. The demand for a2 milk has been fueled by a rise in consumer health consciousness, increased consumer expenditure, and increased product awareness and knowledge through ads. This is one of the most important elements driving a2 milk demand. Furthermore, the use of a2 milk powder as a component in newborn formulae is gaining popularity. This is owing to the fact that it is easier to digest than regular milk. As a result, several international companies are steadily developing and selling infant formulae containing a2 milk. However, because a2 milk is more expensive than ordinary milk, it may stifle the expansion of the a2 milk market. Key Players:- 1. Abis Hatchery Pvt. Ltd. 2. Bhagyalaxmi Dairy Farms Pvt. Ltd. 3. Creamy Foods Ltd. 4. Dempo Dairy Inds. Ltd. 5. Glamorous Properties Pvt. Ltd. 6. Goga Foods Ltd. 7. Heritage Foods Ltd. 8. Indapur Dairy & Milk Products Ltd. 9. India Dairy Products Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Investment Opportunities in Business of IV Fluids (BFS Technology). Fastest-Growing Industry of Pharmaceuticals.

In hospitals and emergency rooms, intravenous fluids are routinely employed. IV fluids come in a variety of shapes and sizes, and they can be utilised as IV boluses or maintenance fluids. Intravenous (IV) fluids should only be given to patients who cannot meet their needs through oral or enteral routes. Oral fluid intake should be maximised whenever possible, with IV fluid administered primarily to replenish the deficiency. In clinical medicine, intravenous solutions are commonly used to restore and maintain bodily fluids. They are given to people who have lost bodily fluids owing to dehydration or other medical disorders. Intravenous solutions are injected straight into the veins and provide immediate relief to those receiving therapy. About BFS Technology: The container is created, filled, and sealed in one continuous, automated system in blow-fill-seal (BFS) technology, which is a type of advanced aseptic production. The reduction of human participation is a major benefit of this technology, as it lowers the possibility of microbial contamination and foreign particles. Small containers, such as ophthalmic and respiratory medication ampoules, as well as larger capacity containers, such as saline or dextrose solutions, have long employed BFS in liquid pharmaceutical applications. BFS technique has been expanded to include injectables and biologics, such as vaccines and monoclonal antibodies (mAbs). Because of its inherent efficiency and aseptic advantages, the technology is increasingly being used in pharmaceutical packaging, with the US Food and Drug Administration (FDA) now classifying BFS as a "advanced aseptic process," indicating its use as a preferred technology for aseptic packing of liquids and semi-solids. Intravenous fluids are widely utilised in hospitals and clinics. IV fluids are routinely used to rehydrate those who are dehydrated. They can also be used to help people with hypotension or sepsis maintain their blood pressure. IV fluids can also be used as maintenance fluids for people who don't drink enough water during the day. • It's used to supply more fluids and electrolytes to the body when they're needed • It's used to give other pharmaceuticals as a shot • It could be given to you for other reasons. Consult your physician. Intravenous (IV) access is used to provide drugs and fluid replenishment that need to be dispersed throughout the body quickly. The avoidance of first-pass metabolism in the liver is another advantage of IV delivery. The global intravenous solutions market was worth USD 10.7 billion in 2020, and it is predicted to increase at a 7.9% compound annual growth rate (CAGR) from 2021 to 2028. Malnutrition, particularly among the older population as a result of chronic conditions such as cancer, is likely to increase demand for IV treatments in the coming years. One of the most prevalent side effects of cancer is dehydration. Chemotherapy can produce dehydration as a result of side effects such vomiting, diarrhoea, or increased urination, necessitating IV hydration. Over the forecast period, the intravenous solutions market is expected to grow at a CAGR of roughly 4.3 percent. The increase in the prevalence of diseases such as gastrointestinal diseases, neurological diseases, and cancer, where intravenous solutions are the main sources of energy for the patients, is a major factor contributing to the market's growth. Diarrhea is the second largest cause of death in children under the age of five, according to the World Health Organization. Every year, over 1.7 billion instances of infantile diarrhoea sickness are reported worldwide. An increase in the prevalence of chronic and acute disorders, as well as an increase in the elderly population, are driving the global intravenous solutions market. Increased strategic cooperation between manufacturers to improve product portfolios and global presence, expansion in the pharmaceutical business, increased demand for intravenous solutions from developing economies, and increased health-care spending. However, the worldwide intravenous solution market is projected to be restrained by factors such as a strict regulatory environment and expensive fluid maintenance costs. Intravenous medications, nutrients, and fluids have all become commonplace in modern therapy. Key Players • Baxter International Inc • ICU Medical • B. Braun Melsungen Ag • Grifols • Fresenius Kabi USA • Vifor Pharma Management Ltd • JW Life Science • Amanta Healthcare • Axa Parenterals Ltd • Salius Pharma Private Limited.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Dairy Farming & Dairy Products (Milk, Butter, Ghee, Paneer& Curd)

Dairy farming is a type of agriculture in which milk is produced over a lengthy period of time and then processed and sold as a dairy product. Dairying is a source of revenue for small/marginal farmers and agricultural labourers. Agriculture accounts for around 33% of India's gross domestic output, and it employs 66% of the country's economically active population. The livestock business is expected to account for 21% of the total agriculture industry. India produces the most milk in the world and is the world's largest exporter of skimmed milk powder, but it only exports a few other milk products. Due to increased local demand for dairy products and a significant demand-supply mismatch, India may become a net importer of dairy commodities in the future. New Zealand, the European Union's 28 member states, Australia, and the United States are the world's top exporters of milk and milk products. China and Russia were the world's largest importers of milk and milk products. Milk is defined as the whole, fresh, clean lacteal secretion obtained by complete milking of one or more healthy milch animals, excluding milk obtained within 15 days prior to and 3 days following calving, or such periods as may be necessary to render the milk practically colostrum-free, and containing the minimum prescribed percentage of milk fats and S-N-F. Butter is a dairy product made from milk's solid elements (fat and protein). Butter is one of the most concentrated forms of fluid milk. Twenty litres of whole milk are required to make one kilogramme of butter. Ghee is a clarified butter that is mostly made from cow's milk. It has more fat than butter because the water and milk solids have been removed. Ghee has a higher smoke point than butter and so doesn't burn as quickly. Paneer is a famous Indian dairy product that resembles an unripe Ned type of soft cheese and is used in a variety of dishes and snacks. Curd is a solid product rather than a liquid. Curd contains carbohydrates, lipids, and minerals, but proteins make up a major amount of the dry matter. Dairy farming has progressed from a simple family-run business to a highly structured industry with technological specialists at every stage. Dairy farming equipment has come a long way, allowing modern dairy farms to manage hundreds of dairy cows and buffaloes. This tremendous expansion has resulted in the establishment of a large number of farming jobs for the common public. Few Indian Major Players • Bhagyalaxmi Dairy Farms Pvt. Ltd. • Creamy Foods Ltd. • Dempo Dairy Inds. Ltd.
Plant capacity: A2 Milk 3,650Kgs per day A2 Butter 57 Kgs per day A2 Ghee 50 Kgs per day A2 Paneer 178.50 Kgs per day A2 Curd 1,244 Kgs per day Manure 7,000 Kgs per dayPlant & machinery: 337 Lakhs
Working capital: -T.C.I: Cost of Project: 1965 Lakhs
Return: 26.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

ADHESIVE (Fevicol Type - D2, D3, D4)

An adhesive is a substance that holds two surfaces together by wetting them, sticking to them, and building strength and stability after application. It is necessary to prepare the surface before applying the glue. The most prevalent source ingredients for adhesives are polymeric polymers, both natural and synthetic. A good technique to identify adhesives is to look at how they respond chemically after they've been applied to the surfaces to be bonded. There are a variety of adhesives available, and one that is appropriate for the materials to be joined must be chosen. Adhesives are used in the resilient type carpentry, office and stationery industries, decorative use fabric industry, ceramic and leather industries, and paint industry. Application are: a) Adhesives, such as white craft glue, are used to adhere lightweight materials including cardboard, paper, cloth, and children's crafts. Because they are frequently carried by water, they are easier to clean and less harmful. These glues must cure before any strength may be determined. b) Adhesive is utilised in the fabric business. Fabric adhesives, such as polyvinyl acetate or liquid white glues, can be used to accomplish this. c) Acrylate adhesives are widely utilised in ceramic and leather manufacturing. These glues have a tendency to bond rapidly and create a strong, transparent finish. d) Adhesive is a substance used in the paint industry to improve the adhesion of paint and coatings. Wood Type Adhesives are a less expensive and less harmful to the environment than solvent-based adhesives. Water-borne adhesives have the advantage of not containing volatile organic compounds. Acrylics have a number of advantages, such as durability, colour retention, quick drying, environmental friendliness, and impact resistance, to name a few. Few Indian Major Players 1. Anabond Ltd. 2. Century Plyboards (India) Ltd. 3. D I C India Ltd. 4. F C L Technologies & Products Ltd. 5. Feroke Boards Ltd.
Plant capacity: Fevicol Type Adhesive (D2, D3 & D4) 10 MT Per DayPlant & machinery: 78 Lakhs
Working capital: -T.C.I: Cost of Project: 247 Lakhs
Return: 27.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 196 of 199 | Total 1985 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 196 198 199   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top