REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Mizoram- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mizoram is a state of India. It is located in the northeastern part of the country and is bounded by Myanmar (Burma) to the east and south and Bangladesh to the west and by the states of Tripura to the northwest, Assam to the north, and Manipur to the northeast. The capital is Aizawl, in the north-central part of the state. Agriculture is the dominant economic activity of Mizoram, engaging more than two-thirds of the workforce. Two types of agriculture are practiced: terrace cultivation, in which crops are planted on relatively permanent, graduated terraces on the sides of hills and mountains to conserve water and reduce soil loss; and shifting agriculture, in which tracts called jhum are cleared by burning, cultivated for a limited period of time. Mizoram has a population of 1,091,014 with 552,339 males and 538,675 females. This reflects a 22.8% growth since 2001 census; still, Mizoram is second least populated state of India. The sex ratio of the state is 976 females per thousand males, higher than the national ratio 940. The density of population is 52 persons per square kilometer. Mizoram gross state domestic product (GSDP) in 2011-2012 was about 6991 crore (US$1.1 billion). The state's gross state domestic product (GSDP) growth rate was nearly 10% annually over 2001-2013 period. With international borders with Bangladesh and Myanmar, it is an important port state for Southeast Asian imports to India, as well as exports from India.

TOURISM

Mizoram, the Land of the Highlanders, is sandwiched between Myanmar, Bangladesh and the states of Tripura, Assam and Manipur. The rivers, peaks, plains and the lakes are the treasures of Mizoram. It is full of high ranges running from north to south covered by greenery throughout the year. The Mizoram State Government begins to recognize tourism as an important sector of the economy which needs to be developed for greater income generation. More emphasis on sustainable eco-tourism, adventure tourism, village tourism and rural tourism would bring in high - value tourism. With the increase of tourist the need for budget hotels has been acutely felt.

Tourism has emerged as an important economic activity and one of the fastest growing industries in the world. Globally, Tourism is the fastest growing industry and in terms of value, it comes third only after petroleum and Transport Industry.

 

As such, Tourism Department in Mizoram is also one of the fastest growing Departments in Mizoram. The Department has achieved these objectives by constructing Tourist Lodge, Tourist Resort and other Tourist amenities in difference places of Mizoram through liberal financing of Ministry of Tourism, Government of India.


INDUSTRIAL POLICY

The Industrial Policy of Mizoram State was first notified on 15.3.1989 to give direction to the strategy for Industrial development of the State. It laid stress on reducing shifting cultivation by encouraging a shift from primary to secondary sectors while protecting the Socio-Cultural and ethnic identity of the indigenous enterprise of Mizoram.

In view of the National Industrial Policy which laid special emphasis for the development of Industries in the North Eastern Region, the Govt. of Mizoram had notified new Industrial Policy 2000 for accelerated Industrial and Economic development of the State. The Government had adopted the approach for identification of thrust areas and promoting them with fiscal and other incentives packages. Broad policy of Foreign Direct Investment (FDI) and Investment from outside the State has been adopted on Joint venture (JV) mode to safeguard the interest of the tribal population of Mizoram. Various administrative support system and market support system are also announced. The Govt. of Mizoram is mandated in giving sustainable employment and introducing better utilization of land by introducing New Land Use Programme (NLUP).

OBJECTIVES

•        To create infrastructure facilities, provide incentives and marketing as well as technical support to industries.

•        To provide skill development and training for educated youth to develop entrepreneurial skills and make them self-employed.

•        To create employment opportunities particularly to the vulnerable section of the society and people in rural area, ensuring inclusive development.

•        To reduce sectoral and regional imbalance in the industrial development in the State by promoting Industries under all sectors.

•        To create proper linkage of processing Industries with the farm produce of agriculture, horticulture, forest and livestock’s.

•        To attract investment in the state.

IDENTIFICATION OF THRUST AREAS

Thrust will be given for those industries based on value addition of locally available resources. Special incentives will be formulated for speedy development of industrial units engaged in any of the following thrust sector Enterprises.

•        Forest-based Industries

The vast bamboo and other forest resources of Mizoram will be optimally harvested for setting up of Industry for manufacturing of various high value bamboo and other forest based products.

•        Food Processing Industries

Primary production of various food items, whether agricultural based, horticultural or livestock based will be linked with processing Industries.

•        Handloom Industries

Handloom sector will continue to receive serious attention of the Govt. Utmost importance will be given for improving quality product by introducing improved design, packaging, branding.

•        Handicraft Industries

The traditional skill of Mizo people will be upgraded and diversified for market competitiveness of handicraft products.

•        Plantain fibre and hill brooms

The Govt. will encourage value addition of hill-brooms. The flow of raw and unprocessed broom outside the state will be discouraged by giving attention towards value addition to help local industry.

•        Textile related industries

Bulk production of readymade garments will be encouraged as this sector is having good potential for market outside the state and export.

•        Animal Feed and poultry feed Industries

The Government is giving thrust towards having sufficient meat and meat products for which farming has been encouraged.

INCENTIVES

The incentives offered under the Rules for the grant of incentives/subsidies under the Industrial Policy of Mizoram State are-

•        Subsidies on the cost of Project Report 

•        Land subsidy

•        Factory rent subsidy

•        Manpower development subsidy

•        Interest subsidy

•        Power subsidy

•        Subsidy on Power Line 

•        Subsidy on Power Generating set

•        State Transport subsidy on Plant and Machinery 

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 181 of 249 | Total 2486 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 181 248 249   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Multispeciality Hospital (100 Bedded)

A Multi-speciality hospital as a health care organization has been defined in varied terms as an institution involved in preventive, curative/ameliorative, palliative or rehabilitative services. A specialty hospital is dedicated to specific sub-specialty care (Urology, General Surgery, Cosmetic surgery, Bariatric surgery, Clinic Pathology, Pediatrics & Neonatology). Patients will often be referred from smaller hospitals to a specialty hospital for major operations, consultations with sub-specialists and when sophisticated intensive care facilities are required. A private hospital is a place where one may get treatment from ordinary fever to a major surgery operation. These hospitals have highly trained specialists, high-end technology and provide round the clock services. These hospitals are able to do specialized tests, undertake dialysis for acute renal failure, provide ventilation to patients with respiratory failure and render intensive care to critically ill patients. These hospitals undertake research and have adequate library facilities. There is a significant scope for enhancing healthcare services considering that healthcare spending as a percentage of Gross Domestic Product (GDP) is rising. Rural India, which accounts for over 70 per cent of the population, is set to emerge as a potential demand source. The Healthcare Information Technology (IT) market which is valued at US$ 1 billion currently is expected to grow 1.5 times by 2020. Thus, due to demand it is best to invest in this project. Few Indian major players • Alps Hospital Ltd. • Amri Hospitals Ltd. • Anshu Hospitals Ltd. • Apollo Hospitals Enterprise Ltd. • Apollo Hospitals Intl. Ltd. • Apollo Rajshree Hospitals Pvt. Ltd. • Assam Hospitals Ltd.
Plant capacity: 100 beddedPlant & machinery: Rs. 13989 Lakh
Working capital: -T.C.I: Cost of Project: Rs. 38304 Lakh
Return: 26.00%Break even: 31.00%
Add to Inquiry Add to Inquiry Basket

Cold Storage

A cold storage is a temperature-controlled supply chain network, with storage and distribution activities carried out in a manner such that the temperature of a product is maintained in a specified range, needed to keep it fresh and edible for a much longer period than in normal ambient conditions. This system facilitates long distance transport of various products as well as makes seasonal products available over the entire year. Cold Storage is a special kind of room, the temperature of, which is kept very low with the help of machines and precision instruments. Chilling involves reducing food temperatures to below ambient temperatures, but above –1°C. This results in effective short-term preservation of food materials by retarding many of the microbial, physical, and chemical and biochemical reactions associated with food spoilage and deterioration. At chilled temperatures (generally between 0°C and +5°C) the growth of microorganisms occurs only slowly and food spoilage and deterioration reactions are inhibited to such an extent that food safety and quality is preserved for extended periods, often for a few days, sometimes for a few weeks, longer than the fresh counterpart. Most of the modern cold storages are being planned for more and more automation. Mechanical equipment like Pressure Gauges, Thermometers, Physical logbooks etc. are being replaced with micro process controls, transducers, and automatic recorders. The Information Technology, with suitable fully computerized and proper software are being developed and used. But many small cold storages still heavily depend on old manual labour. Increasing cross-border trade and growing organized retail industry is driving the Indian cold chain storage market. Though the cold chain storage market in India is witnessing healthy growth, high operative cost and lack of standardization in the industry are likely to hinder the market growth during the forecast period. The Indian cold chain market reached a value of nearly INR 1,285 billion in 2020. The industry is further expected to grow at a CAGR of 14.3% over the forecast period of 2021-2026 to attain a value of INR 2,865 billion by 2026. Entrepreneurs who invest in this project will be successful.
Plant capacity: 33 mt /dayPlant & machinery: Rs. 179 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 514 Lakhs
Return: 20.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Oxygen and Nitrogen Gas Plant (Medical and Industrial Grade)

Limelight used oxygen derived from sources such as the barium oxide Brin process. This process was based on the production of barium peroxide by roasting barium oxide in air at 590°C, then raising the temperature to 870°C. At 870°C the peroxide formed decomposes back into oxide, releasing more or less pure oxygen which can then be cooled and compressed into steel gas cylinders. Although crude, the process was ingenious in that it required no continuous input of raw materials other than air and energy. Oxygen is non corrosive and can be contained in any common metals. However care must be taken to remove all oil, grease and other combustible material from piping and containers before putting them into oxygen service. Nitrogen gas is a compound that forms from elemental nitrogen, which is found abundantly throughout the planet’s atmosphere and in most biochemical reactions. One of nitrogen’s unique properties is its ability to form multiple bonds with various other elements and compounds. Nitrogen is the chemical element with the symbol N and atomic number 7. It was first discovered and isolated by Scottish physician Daniel Rutherford in 1772, nitrogen is the principal gas in air (78%). Its first major industrial use lay in the manufacture of ammonia, used within the chemical industry as an intermediate for many compounds but especially nitrogenous fertilisers. In the combustion process, the oxygen in air is broken down to make carbon dioxide, water, and energy. Nitrogen is not an essential part of the process. In fact, nitrogen in air has negative impacts on combustion processes. Nitrogen gets heated by the reaction to very high combustion temperatures and is carried out through the flue. Essentially, the heated nitrogen leaving the flue is like throwing fuel out of the stack. Nitrogen blanketing is used to protect flammable or explosive solids and liquids from contact with air. Certain chemicals, surfaces of solids and stored food products have properties that must be protected from degradation by the effects of atmospheric oxygen and moisture. Protection is achieved by keeping these items in a nitrogen atmosphere. India industrial gases market was valued at $ 2.1 billion in 2017 and is forecast to grow at a CAGR of over 11% to surpass $ 3.9 billion in 2023 on account of growing demand from metal industry, particularly steel. As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players • Air Liquide India Holding Pvt. Ltd. • Arrow Oxygen Ltd. • Bellary Oxygen Co. Pvt. Ltd. • Bhagawati Oxygen Ltd. • Bhilai Oxygen Ltd. • Govind Poy Oxygen Ltd. • Howrah Gases Ltd. • Linde India Ltd.
Plant capacity: 3200 cumtrs/DayPlant & machinery: Rs. 183 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 675 Lakhs
Return: 26.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Woven PP Cement Sacks

Woven polypropylene bags are specializing in packing and transporting bulk commodities. Due to strength, flexibility, durability and lower cost, woven polypropylene bags are most popular products in industrial package, which are widely used in packing grain, feeds, fertilizer, seeds, powders, sugar, salt, powder, chemical in granulated form. Polypropylene bags also referred as 'Polypropylene bags' or 'PP bags'. Woven, or weaving is a method by many threads or tapes woven in two directions (warp and weft), to form a fabric for plastic industry needs. In the plastic woven industry, with a plastic film is drawn into filaments, woven into fabric/sheet/cloth. It can be into a tarpaulin, woven bags, container bags, tons of bags, geotextiles fabric, and color of the cloth and so on. Polypropylene bags are versatile, attractive bags most commonly used for packaging small items such as beads and lollies. These bags can be sealed with a heat sealer like many other plastic bags. While polypropylene is similar to cello, polypropylene bags are much clearer with neater seals, and have the advantage of being less expensive than cello bags. PP woven bags are increasingly used to pack food. Common food woven bags include rice PP weaved bags, flour PP woven bags, maize woven bags, etc. Geotechnical engineering: PP woven fabrics are extensively used in the construction of irrigation works, roads, railways, ports, mines, buildings, and more. Having the functions of filtering, draining, isolation, and anti-seepage, PP woven fabrics are one of the most popular geo synthetics. The special woven bags also are used to serve some special purposes. For example, UV resistant woven bags have UV protection and anti-aging function, allowing them a longer lifespan in the sunlight. The global market for polypropylene woven bags and sacks market was valued at US$ 3,421.5 million in 2017. The market is expected to expand at a CAGR of 4.2% over the forecast period, 2018-2028. Thus, due to demand it is best to invest in this project.
Plant capacity: PP Woven Sacks (for Cement Bag 50 Kgs Size):258000 Nos/ day PP Woven Jumboo Sacks (for Cement Bag 1500 Kgs Size):956 Nos/day Plant & machinery: Rs. 566 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 891 Lakhs
Return: 14.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

IV Cannulas Manufacturing Uni

Intravenous (IV) cannulation is a technique in which a cannula is placed inside a vein to provide venous access. Venous access allows sampling of blood, as well as administration of fluids, medications, parenteral nutrition, chemotherapy, and blood products. ‘Cannula exactly the same thing– a flexible tube inserted into the body to administer or withdraw fluids or to keep another tube patent. Intravenous cannulation is a technique in which a cannula is placed inside a vein to provide venous access. Venous access allows sampling of blood as well as administration of fluids, medications, parental nutrition, chemotherapy, and blood products. One of the IV cannula uses that changed the lives of individuals and helped clinical staff to perform intravenous treatments easily is with the presence of the Safety I.V cannula. Wellbeing I.V cannula. Implies a gadget that is utilized to flexibly liquids legitimately or in a roundabout way to the patient’s circulatory system. IV Cannula has veterinary use, nasal or oral use too. Cannula can also be used for piercing. The common uses are rapid transfusion of blood, transfusion of IV drugs. Pediatric patients or adults with small veins undergoing long term medication or blood transfusion are subjected to IV Cannula. It is also used on oncology patients undergoing Chemotherapy. Intravenous Cannulas allow the introduction or withdrawal of fluids from the human circulatory system. The short flexible and kink-resistant cannula is introduced into a blood vessel over a hollow introducer needle. It is also used on oncology patients undergoing Chemotherapy. The global peripheral I.V. cannula. Market was valued at $3,702.2 million in 2015, and it is expected to grow at a CAGR of 6.0% during the period 2016 – 2022. The global market is increasing, due to growing geriatric population and increasing incidence of chronic diseases. Entrepreneurs who invest in this project will be successful. Few Indian major players • Angi Plast Pvt. Ltd. • Global Medikit Ltd. • Hemant Surgical Inds. Ltd. • Hindustan Syringes & Medical Devices Ltd. • Mediplus (India) Ltd. • Smiths Medical India Pvt. Ltd.
Plant capacity: IV Cannula with Wings & with Injection Port Needle: 40000 pcs/day IV Cannula with Wings & with Injection Port Needle: 32000 pcs/day IV Cannula with Wings & with Injection Port Needle: 32000 pcs/dayPlant & machinery: Rs.1705 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 14615 Lakhs
Return: 35.00%Break even: 31.00%
Add to Inquiry Add to Inquiry Basket

Glucose Saline

Glucose, also known as dextrose, is a simple sugar that can be found in nature and are chemically identical. Dextrose may decrease body protein and nitrogen losses, promote glycogen deposition, and decrease or prevent ketosis if sufficient doses are given. Since dextrose is usually metabolized to carbon dioxide and water, administration of a solution of dextrose and water is equivalent to providing the same volume of free water. Dextrose is readily metabolized; it increases blood glucose concentrations and provides calories. Dextrose may decrease body protein and nitrogen losses, promote glycogen deposition, and decrease or prevent ketosis if sufficient doses are given. Since dextrose is usually metabolized to carbon dioxide and water, administration of a solution of dextrose and water is equivalent to providing the same volume of free water. Following oral administration, dextrose, a monosaccharide, is rapidly absorbed from the small intestine principally by an active mechanism. It used for balancing the body fluid and it is added to the human body to balance the body fluid by injection which will recover fatality of the human being and recover the inside body pressure. Treatment of discarded water and electrolyte metabolism, especially in severe cases. Therapy of acid base in balances. The volume substitution and volume replacement in surgery of accident victim suffering blood lose. Arenteral nutrition for severally ill and post-operative patients. Saline is also often used for nasal washes to relieve some of the symptoms of the common cold. The solution exerts a softening and loosening influence on the mucus to make it easier to wash out and clear the nasal passages for both babies and adults. In this case "home-made" saline may be used: this is made by dissolving approximately half a teaspoon of table salt into 8 ounces (approx. 240ml) of clean tap water. The global intravenous solutions market reached a value of US$ 8.5 Billion in 2019. IV solutions and electrolytes are mainly used for fluid resuscitation, routine maintenance, replacement, and redistribution. The Market size value in 2020 is USD 86.2 million and Revenue forecast in 2025 is USD 121.7 million is expected to exhibit a CAGR of 7.1% from 2018 to 2025. As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players • Amanta Healthcare Ltd. • Baxter Pharmaceuticals India Pvt. Ltd. • Bayer Pharmaceuticals Pvt. Ltd. • Denis Chem Lab Ltd. • Meridian Enterprises Pvt. Ltd. • Pfizer Healthcare India Pvt. Ltd. • Pfizer Ltd. • Pharmacia Healthcare Ltd. • Shree Krishna Keshav Laboratories Ltd. • Vikrant Pharmaceuticals Ltd.
Plant capacity: 200000 Bottles/ dayPlant & machinery: Rs. 2170 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 4083 Lakhs
Return: 25.00%Break even: 37.00%
Add to Inquiry Add to Inquiry Basket

Vitamin ‘C’ from Sorbitol

Vitamin c is chemically the simplest of the vitamins and for this reason was among the first to be isolated, characterized, and purified and to have its structure determined. More vitamin C is produced industrially than any other vitamin, or indeed all the other vitamins put together. Vitamin C has itself been said to have almost magical properties and it is useful to get a picture of the chemistry and biochemistry of this enigmatic compound. This has unearthed a rich vein of chemistry involving L-ascorbic acid as both a redox companion and as a complexion agent; indeed the reaction of L-ascorbic acid with oxygen and other oxidizing agents is catalyzed by transition metal ions, especially copper (II), so that sometimes solution are stabilized by the addition of EDTA, which complexes the metal ions and arrests the catalysis. It is one of the few pure chemical compounds which is taken routinely by human beings in gram quantities (a possible challenger is sugar). It appears to have no harmful effects even in these large amounts and it is a medicine which it is a pleasure to take, especially in the form of fruit or vegetables. Its role (as a constituent of fruits and vegetables) in the cure and prevention of scurvy was widely debated for hundreds of years. Ascorbic acid is generally used in bread due to its properties that help extend shelf life, high profile industrial bakers such as Hovis and Kings mill both use ascorbic acid in the majority of their loaves. Using ascorbic acid in an industrial bakery can contribute to higher profit yields, lower production times and higher buyer satisfaction longer shelf life, reduced number of damaged loaves during transport. The global Ascorbic Acid market is expected to witness moderate growth over the forecast period on account of increasing demand from pharmaceutical industry. The majority of ascorbic acid manufactured is used as an antioxidant. The major end-user industries of ascorbic acid are pharmaceuticals, food & beverages, personal care, and others. The pharmaceutical industry is the largest consumer of ascorbic acid. Vitamin C helps to recycle vitamin E. The presence of a broad distribution network of companies in this region will boost the Asia Pacific vitamin ingredients market in the near future. Analysts predict this regional market to rise at a CAGR of 5.40% from 2017 to 2025 in terms of value. Entrepreneurs who invest in this project will be successful. Few Indian major players • Dishman Pharmaceuticals & Chemicals Ltd. • Glaxosmithkline Pharmaceuticals Ltd. • Gulshan Polyols Ltd. • Kasyap Sweetners Ltd. • M S Healthcare Pvt. Ltd. • Pfizer Healthcare India Pvt. Ltd. • Pfizer Ltd. • Procter & Gamble Health Ltd. • Unicorn Organics Ltd.
Plant capacity: 600 kg/dayPlant & machinery: Rs. 371 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 717 Lakhs
Return: 24.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Lithium Ion (LiFePO4) Cell Manufacturing

The Lithium Iron Phosphate Battery (LiFePO4 battery) or LFP Battery (lithium ferrophosphate), is a type of lithium-ion battery using LiFePO4 as the cathode material (on a battery this is the positive side), and a graphitic carbon electrode with a metallic backing as the anode. Cylindrical lithium cells are used for high specific energy density and good mechanical stability. Li-ion batteries have a higher energy density when compared to other rechargeable batteries. Li-ion batteries are composed of four main components namely cathode, anode, electrolyte, and separator. Lithium-ion battery generates electricity because of continuous reactions of lithium Li-ion Batteries have high power capacity without being too bulky. Lithium ion batteries are thus used in electronic equipment like mobile phones and laptops, which need to operate longer between charges while consuming more power and need batteries with a much higher energy density. Memory effect refers to as the process of losing maximum energy capacity of rechargeable batteries due to repeated recharges after being only partially discharged. They are used in telecommunication equipment, instruments, portable radios and TVs, pagers. They are used to operate laptop computers and mobile phones and aerospace application. Also used in electric vehicles, cell phones, camcorders, lap-top and palmtop computers, portable electronic devices, etc. The li-ion batteries are used in cameras, calculators; they are used in cardiac pacemakers and other implantable device. They are used in telecommunication equipment, instruments, portable radios and TVs, pagers. The lithium iron phosphate batteries market, by application, is segmented on the basis of the end-users it caters. The portable segment was the largest market in 2018 owing to its increased demand from the automotive sector, which is the major demand-generating industry for lithium iron phosphate batteries. The market for lithium-ion battery in India is expected to grow at a CAGR of 34. 8% during the forecast period of 2019 – 2024. In addition to it, the lithium-ion battery has comfortable rechargeable property, lightweight, long-lasting; thus, it perfectly contributes to the electric vehicle market to grow in the forecast period. Thus, due to demand it is best to invest in this project. Few Indian major players • BYD Company Ltd. • A123 Systems LLC, • K2 Energy • Electric Vehicle Power System Technology Co., Ltd. • Bharat Power Solutions
Plant capacity: 25000 nos/dayPlant & machinery: Rs. 3618 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 4626 Lakhs
Return: 25.00%Break even: 39.00%
Add to Inquiry Add to Inquiry Basket

Single Wall Steel Water Bottle

Water bottles are available in different shapes, colors, and sizes. The stainless steel bottle comes with a string to provide ease of carrying. Stainless steel fridge bottle is made from high-quality steel, food-grade and BPA-free stainless steel material that make the bottles safe for use on a regular basis. The taste and nutritive value of the drinks remains intact making the bottle very appropriate choice for storing beverages. Water bottles can be either disposable or reusable. Single-walled metal bottles readily transfer temperature of contents to external surfaces, which make them unsuitable for use with unusually hot or cold liquids. Double-walled metal bottles are insulated to keep cold liquids cold and hot liquids hot, without the external surface being too hot or too cold. Because double-walled bottles have more metal in them, they are more expensive. They are typically vacuum-insulated. Metal water bottles are growing in popularity. Made primarily from stainless steel or aluminium (aluminium), they are durable; retain less odor and taste from previous contents than most plastic bottles. Double-walled metal bottles are insulated to keep cold liquids cold and hot liquids hot, without the external surface being too hot or too cold. Because double-walled bottles have more metal in them. Single wall stainless steel water bottles prevent condensation and don’t allow sweat to happen. The outside of the bottle remains normal, even having cold water inside. The bottles have a single layer of steel that helps you keep drink hot or cold for long hours. Be it a chilled winter morning or a warm day at work, you can always have a refreshing sip of drink from these bottles. Steel bottles are environment-friendly and can be used for multiple years and do not end up in landfills owing to their 100% recyclability. Stainless steel water bottles can be used more than hundreds of times. You just need to clean them after one use, and they will be ready for the next use. Investing once in steel bottles, you don’t have to even think about reinvesting in them for like multiple years. The market is expected to reach INR ~403.06 Bn by the end of 2023, from its current value of INR ~160 Bn, expanding at a compound annual growth rate (CAGR) of ~20.75% from 2018. Based on volume, the market is likely to reach ~35.53 Bn liters by 2023, expanding at a CAGR of ~18.25% from 2018 to 2023. Entrepreneurs who invest in this project will be successful. Few Indian major players • Borosil Ltd. • Cello International Pvt. Ltd. • Hamilton Housewares Pvt. Ltd. • M-Pol Industries Bangalore Pvt. Ltd. • Nirlon Ltd.
Plant capacity: 2,000 nos/ dayPlant & machinery: Rs. 138 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 439 Lakhs
Return: 29.00%Break even: 64.00%
Add to Inquiry Add to Inquiry Basket

Magnesium Powder from Dolomite Stone

Magnesium (Mg) is a silvery white metal that is similar in appearance to aluminium but weighs one-third less. Magnesium is strongly reactive with oxygen at high temperatures; above 645°C (1,190°F) in dry air, it burns with a bright white light and intense heat. For this reason, magnesium powders are used in pyrotechnics. At room temperature, a stable film of water-insoluble magnesium hydroxide forms on the metal’s surface, protecting it from corrosion in most atmospheres. The highly reactive metal is used in the manufacture of reagents, which are essential in modern metal processing. But Magnesium allows for so much more. As an example: The bonding of powder molecules by atomic diffusion process in the shaping production of components by pressure or sintering, will result in components superior to other metals with regard to their characteristics. In particular their weight is a clear benefit. magnesium powder is widely used in such scientific areas as military and aviation industries, The chemical performance of magnesium is very active, which is mostly used in metallurgical industry. Magnesium powder can serve as desulfurizer or cleaning agent for steel-making industry and casting of non-ferrous metals, and reducer for production of rare metal. In chemical industry, magnesium powder can be used as dehydrator for organic compound or to directly make organic compound of magnesium. Magnesium allows the bonding of powder molecules by atomic diffusion process in the shaping production of components by pressure or sintering, will result in components superior to other metals with regard to their characteristics. In particular their weight is a clear benefit. Magnesium powder can serve as desulfurizer or cleaning agent for steel-making industry and casting of non-ferrous metals, and reducer for production of rare metal. Magnesium powder is an essential nutrient for plant growth; it enhances food quality. Magnesium (Mg) plays a vital role in chlorophyll formation and photosynthesis. It influences various metallic processes and reactions such as photophosphorylation (i.e., ATP formation in chloroplasts), photosynthetic carbon dioxide (CO2) fixation, protein synthesis, partitioning and utilization of photo-assimilates, generation of reactive oxygen species, and photooxidation in leaf tissues. The market in Asia-Pacific dominated the global market with a share of over 40% in 2018 and is projected to register the highest CAGR of over 6.5% during the forecast period. The Global Magnesium Powder Market is projected to register a healthy CAGR of 5.50% to reach USD 1,334.6 Million by the end of 2024. Thus, due to demand it is best to invest in this project.
Plant capacity: 166.7 MT/dayPlant & machinery: Rs. 4160 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 13904 Lakhs
Return: 26.00%Break even: 72.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 181 of 249 | Total 2486 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 181 248 249   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top