Google Search

Search

Already a Member ?

Best Business Opportunities in Meghalaya- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Meghalaya is a state in north-east India. The name means "the abode of clouds" in Sanskrit. As of 2011, the state has a population of 2,964,007 and is the 23rd most populous in the country. The population of Meghalaya as of 2014 is estimated to be 3,211,474. Meghalaya covers an area of approximately 22,430 square kilometers, with a length to breadth ratio of about 3:1

Meghalaya is predominantly an agrarian economy. Agriculture and allied activities engage nearly two-thirds of the total work force in Meghalaya. However, the contribution of this sector to the State's NSDP is only about one-third. Agriculture in the state is characterized by low productivity and unsustainable farm practices. Despite the large percentage of population engaged in agriculture, the state imports food from other Indian states.


TOURISM

 Meghalaya has some of the thickest surviving forests in the country and therefore constitutes one of the most important ecotourism circuit’s in India. The Meghalaya subtropical forests support a vast variety of flora and fauna. Meghalaya has 2 National Parks and 3 Wildlife Sanctuaries.   Meghalaya also offers many adventure tourism opportunities in the form of mountaineering, rock climbing, and trekking and hiking, water sports etc. The state offers several trekking routes, some of which also afford an opportunity to encounter rare animals such as slow loris, assorted deer and bear. The Umiam Lake has a water sports complex with facilities such as rowboats, paddleboats, sailing boats, cruise-boats, water-scooters and speedboats. Tourism in India is a growing industry, and as per World Tourism Organization predictions, India will be a leader in using tourism as an employment generator. The State of Meghalaya must be placed in a strategic position to take advantage of this growth.

“MEGHALAYA TOURISM DEVELOPMENT CORPORATION” has been set up for developing and promotion of Tourism in Meghalaya. The Corporation shall make efforts to increase its revenue to enable to carry out promotional activities. MTDC will organize package tours not only to Cherrapunjee but to other tourist destinations; organize training for guides, etc.

INDUSTRIAL SECTOR

The New Industrial & Investment Promotion Policy is designed to facilitate investments in new sectors across the State and thus ensure accelerated and sustained growth. The Policy focuses to attract, facilitate and promote wider expectations and high end investment.

There is an urgent need to promote investment in backward and difficult but resource rich areas. Therefore the policy provides additional incentives and support for such investments.


OBJECTIVE OF THE POLICY

•        To promote investment in all sectors

•        Generate employment opportunities for the local people in the industries and allied sectors.

•        To provide special incentives for promoting local Entrepreneurs in setting up of micro, small & medium manufacturing and service enterprises.

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage.

•        Achieve a balanced and growth oriented development covering the entire state through promotion of village and small scale industries.

•        Encourage need based development of local entrepreneurial skills through intensive motivation and training programmes at District, Sub-division and Block levels.

•        Provide guidance to prospective entrepreneurs by building up a data bank of project-profiles and other connected information. Special support to local entrepreneurs will be provided, and monitoring will be done to enable them to be successful.

•        Simplify rules and procedures by providing a single-window clearance facility for all investment proposals as applicable.

•        Promote Tourism, and make Meghalaya a tourist destination.

•        Promote IT as industries.

•        Promote first generation entrepreneurs. Government will encourage setting up of Entrepreneurship Development Institute by private or in PPP mode.

SALIENT FEATURES OF THE INDUSTRIAL POLICY

•        State Government believes in promoting private enterprises for speedy economic development of the State. The Government also stands committed to ensuring the healthy growth of existing industries. For this purpose, Government will ensure optimum number of industries by not permitting excess in any specific sector, thereby ensuring sustainability of existing business.

•        Enterprises promoted and managed by “Woman Entrepreneur”/physically challenged will get additional 10 % (ten percent) incentives on the State Capital Investment Subsidy.

•        Meghalaya has a long international border which needs immediate attention for development. To address this issue, 10 Kms towards the State from the International border is declared as “PRIORITY AREA” and enterprises set up within the 10 Kms area will be given special incentives to be known as “Border Area Subsidy”.

•        Government of Meghalaya recognizes:

1.       Hotels (not below two star category) and Amusement Parks.

2.       Medical and health services in the nature of nursing homes with a minimum capacity of 25 beds and Super – Specialty Health Care.

3.       Vocational training Institutes.


INDUSTRIES IDENTIFIED AS THRUST AREAS

                    Agro Based Industries :

   Horticulture – Based Units

   Biotechnology Based Units

   Medicinal Plants, Tea and Rubber

                       Animal Husbandry and Meat Processing Industries

         Development of Mineral based Industries:

      Coal-Based Industries

     Limestone Based Industries- Cement Plants, Lime Plants,

                      Calcium Carbide   Plants.

                       Electronics & Information Technology

INCENTIVES FOR LARGE AND MEDIUM SCALE INDUSTRIES

•        For large and medium scale industries, there are subsidies like capital investment subsidy, interest subsidy, power subsidy, subsidy on cost of pollution/quality-control measures, special subsidy for pioneer units in backward areas etc.

•        Exemption from the payment of applicable service tax for seven years to a "Tourism Unit"

•        Sales Tax exemption on sale of finished products for a period of seven years from the date of commercial production.

•        Reimbursement of Central Sales Tax (CST) paid on purchase of Capital Equipment installed till the date of project commissioning.

•        Partial exemption for applicable stamp duty.

INVESTMENT POLICIES

Meghalaya Government has always endeavored to set up the right kind of business climate to motivate investments in the State. In order to attract investment to the various sectors and thus contribute to the development of the economy as a whole.

The major being the industrial policy, which had been announced with a view to take advantage of the liberalized economic scenario in the country and also to keep pace with development in the national industrial sector are-

•        Generate employment opportunities for the local people in the industries and allied sectors

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage. Create a conducive environment for industrial development by creation of the basic Infrastructural facilities and by setting up of industrial areas, growth centre and export promotion industrial park.

•        Provide preference to local Entrepreneurship in setting up of large, medium and small-scale units.

•        Promote local interests through joint ventures with external investors so as to facilitate technology transfer and capital flow by a package of suitable incentives.

•        Encourage setting up of export-oriented, Agro based, Mineral-based, Horticultural based and Electronic units as thrust area.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 198 of 262 | Total 2620 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 198 261 262   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Scope in Production of Woven PP (Polypropylene) Cement Sacks/Bags. Profitable Business Plant for Investment

Introduction: PP woven sacks, also known as polypropylene woven sacks, can be used in a surprising number of areas. They sound like they're only used for major big stuff because of their big name. This can be used in a number of locations, including grocery stores, department stores, fishermen, shipping staff, and so on. PP Woven bags are polypropylene woven bags that are widely used for material packaging in the fertilizer, cement, sand, food grains, sugar, and cattle feed, and other industries. Western Packaging is a major polypropylene bag manufacturer. They come in a variety of sizes, forms, and colours to meet the needs of a wide range of individuals and businesses. They are solid and long-lasting, capable of bearing even the heaviest loads. These are some of the most advantageous packaging options for ensuring that your goods are safe and kept fresh. Related projects:- Packaging Industry, Beverage Can, Bottles, Blister Packs, Carton, Bags, Plastic Bottles, Skin Pack, Tin Can, Boxes, Shrink Wrap, Paper Board, Food, Beverage PP Woven Sacks have proven their worth in the packaging units of many businesses over the years. These sacks are considered to be the toughest packaging bags on the market, and they are in high demand in the industry. These bags are made of non-woven fabric that is soft and comfortable, breathable, has good water absorption and anti-leakage properties, has good tensile strength, is non-stimulating and light, and has a waterproof PE film on the bottom layer that ensures cleanliness and hygiene. For added strength and longevity, these polypropylene bags are woven. Woven PP Cement Sacks Uses: The use of PP woven bags is critical in reducing the negative effects of flooding. Sandbags made of woven polypropylene are commonly used in the building of river banks, dams, and other related projects. PP woven bags are used by almost all, including staff, farmers, and cargo agents. Woven polypropylene bags have the following advantages: • It is non-toxic. • Reusable to the greatest degree possible • It is non-staining. • Durable • Environmentally friendly • Tear-resistant to prevent/minimize product loss • Antibacterial and easy to clean • Low density/lightweight • It's simple to make and cost-effective. • Waterproof or breathable (with laminated film) • Extremely stress and crack prone • Many acids, alkalis, organic solvents, and degreasing agents are immune to it. • Can withstand high temperatures (melting point of 167°F) Related Books:- Packaging Industry, Beverage Can, Bottles, Blister Packs, Carton, Bags, Plastic Bottles, Skin Pack, Tin Can, Boxes, Shrink Wrap, Barrel, Crate, Aseptic, Container, Active, Flexible, Rigid Plastic, Metal, Flexible, Glass, Paper Board, Food, Beverages These bags have a lot of design versatility, a lot of printing options, and a lot of strength. Many of our customers prefer woven polypropylene packaging bags because of these advantages. Rice, Sugar, Wheat etc. are commonly stored in polypropylene bags. This type of PP woven bag is primarily used to package cement and other items. The material may be directly filled with a hose, and once it is complete, the valve closes automatically, providing a locking mechanism. Manufacturing Process: Woven sacks can be laminated or unlamented and are made of polyethylene or polypropylene materials. These sacks are one of the most flexible packaging solutions available, with applications including fertilizers, construction materials, food grains, pesticides, cattle feedstock, and grocery products. Woven sacks are lightweight, moisture-proof, and long-lasting, with high strength and low seepage. The key processes in the production of pp woven bags are extrusion, circular weaving, flexo printing, gravure printing, lamination, bag cutting, LDPE/HDPE inserting, gusseting, and bag sewing. To give you, our valued customers, a better understanding of how to make a PP woven wallet. Polypropylene (PP) is used in the packaging industry and a variety of other industries to create a wide range of PP bags and packaging material. It is a very strong and long-lasting material. As a result, companies won't have to worry about the fabrics or bags lasting a long time if they're made of PP. Extrusion or blow moulding of polypropylene or polyethylene into a film, which is cut and stretched into a flat braid, and then woven into a woven fabric, creates woven cement bags. To radically increase the tension of woven bags, use high-quality polypropylene pp as a raw material that is not afraid of tearing. Enable customers to feel at ease. Related Video: Plastics Projects The following are some of the measures involved in making Woven PP Cement Bags: 1. Extrusion and winding are the first two steps in the process. 2. Weaving Fabric 3. Conversion of Bags 4. Yarn with Many Filaments 5. FIBC Manufacturing 6. Testing and packaging Market Outlook: The global demand for polypropylene woven bags and sacks is projected to rise at a CAGR of 4.2 percent over the next five years. Because of the huge demand for polypropylene products from the fast-moving consumer goods, packaging, and construction industries in the Asia-Pacific region, the Asia-Pacific region is the largest market for the production of polypropylene raw materials and recycled thermoplastics, as well as a growing understanding of the polypropylene plastics recycling industry's significant market potential in society, are propelling the region to the forefront of global demand for recycled polypropylene plastics. Polypropylene woven bags and sacks are non-toxic and 100% reusable. The market for Polypropylene Woven Bags and Sacks is expanding at a faster rate, with significant growth rates over the last few years. Books: - BOOKS & DATABASES The growth of the Polypropylene Woven Bags & Sacks market is fueled by the packaging industry's positive growth, which is a major factor driving the global Polypropylene Woven Bags & Sacks market. Furthermore, the market's growth can be attributed to changing lifestyles in developing countries and increasing per capita income, both of which are driving the Global Polypropylene Woven Bags & Sacks Market. The market for polypropylene woven bags and sacks is expected to rise steadily. The growth of the Polypropylene Woven Bags & Sacks market is fueled by the packaging industry's positive growth, which is a major factor driving the global Polypropylene Woven Bags & Sacks market. Polypropylene woven bags and sacks are used in a variety of industries. Polypropylene woven bags and sacks are widely used in agriculture, food processing, geotechnical packaging, tourism and transportation, everyday necessities, and flood control devices, to name a few. Several major polypropylene woven bag and sack manufacturers are concentrating on biodegradable bio-based polypropylene woven bags and sacks that can be quickly recycled without harming the environment. Food and beverage packaging, which uses polymer bags, is primarily driving the global market. Cosmetics, medicinal devices, chemicals, and fertilizers can all be packaged using this material. Key Players: ? Abdos Polymers Ltd. ? Berry Global, Inc. ? Emmbi Industries Limited ? Al-Tawfiq Company ? Muscat Polymers Pvt. Ltd. ? Mondi Group plc ? Palmetto Industries ? Printpak Inc. ? United Bags, Inc. ? Uflex Ltd. For More Details:- https://niir.org/profile-project-reports/profile/846/pp-bags-for-cement-manufacturing-plant-detailed-project-report-profile-business-plan-industry-trends-market-research-survey-manufacturing-process-machinery-raw-materials-feasibility-study-investment-opportunities-cost-revenue.html
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

How to Start Phenolic Formaldehyde Resin (PF) Manufacturing Business, Production Process. Profitable Business Ideas

Introduction: Phenolic resin is a synthetic polymer produced by reacting phenol or replacing phenol with formaldehyde. It is known as a thermosetting resin. The most popular forms of phenolic resin are resol resin, novolac resin, and others (bio-phenolic resins, cresol novolac, and formaldehyde-free phenolic resins). Phenolic resins are a type of polymer that is one of the most adaptable materials ever invented. Despite the fact that they were developed at the beginning of the polymer era, they continue to be developed into an increasing range of applications. Phenolic resins are a type of synthetic thermosetting resin. Related project:- Production of Phenolic Formaldehyde Resin The original name for the substance was Bakelite. This plastic, which was essentially the first to be sold commercially, typified the old-style black telephones. A thermosetting amino resin is produced by adding phenol and formaldehyde. Phenol formaldehyde resin was the first true synthetic material. To make phenolic resins, excess formaldehyde (resol) or phenol (phenol) can be used (novolac). Resols are soluble in alcohol, while novolacs are stable at room temperature. Crosslinking is used in all of these processes to make a brittle hard plastic that is resistant to water and biodegradation. Phenol formaldehyde resins were used to make dark-colored moulded plastic products with Cellulose, Wood flour, or mineral powders. Resol phenolic is used in plywood, fabric sizing, leather processing, paper strengthening, foams, and chemical resistant coatings. Novolacs is used to produce fibres, adhesives, manufactured components, circuit boards, and mechanical fittings. The other big form of phenolic resin is novolak. In this process, excess phenol and an acid catalyst are used. The resulting thermoplastic is usually ground into a powder, mixed with a filler, and then used in heated and pressurised moulds. Heat-resistant products such as refrigerator and cookware handles and knobs, as well as electrical connectors, commonly use them. Uses of Phenolic Formaldehyde Resin: In a number of industries, phenol formaldehyde is used. Circuit boards, such as PCBs and other printed circuit boards, are mainly made with phenolic resins. Phenolic resins are used in a variety of products, including caps, handles, keys, radio cabinets, furniture, knobs, vacuum cleaners, cameras, ash trays, and engine ignition equipment. It's also used to produce laminated items. Fabric, paper, wood veneers, and other materials impregnated with phenolic resins include laminated sheets, sticks, and tubes, among other materials with widely varying properties. Related Books:- Synthetic Resins, Alkyd, Phenolic Resins Phenolic resin is used to make building panels, gears, and bearings, chemical equipment, air plane parts, clutch and brake linings, and jigs and dies. Casting and potting resins are made from phenolic resins in various ways when it comes to Cast Resins. Molded objects such as radio and television parts, combs, fountain pen barrels, and phonograph records, among other things, are made with them. 1. Decorative laminates, wall coverings, and other related things are made with them. 2. They're used in the manufacture of electrical components such as switches and connectors. 3. They are impregnated into fabrics, wood, and paper. 4. They're used as a bonding adhesive for laminated wooden planks and in varnishes and lacquers. 5. Sulphonated phenol-formaldehyde resins are used as ion-exchange resins. Production Process: The raw material storage room is raided for phenol and formaldehyde. First, a vacuum is formed in the reactor kettle, and then the phenol is charged. Until adding the phenol, a vacuum is produced and cooling water is turned on. All of the starting materials for phenol and formaldehyde are derived from fossil fuels. Related Videos:- Plastics Projects As a result, the scarcity of phenol and formaldehyde for resol production will be harmed by the depletion of fossil fuel resources. Apart from the depletion of fossil fuel resources, environmental concerns such as global warming are also a major concern. As a result, choosing safe and environmentally responsible raw materials for the manufacture of phenol-formaldehyde adhesives is critical. Phenol/formaldehyde resins, which are used to create high-pressure laminates, are generally made by reacting phenol and formaldehyde with an alkaline catalyst like sodium hydroxide. Modifying phenol-formaldehyde resins to boost the properties of adhesive formulations based on them (lower viscosity, higher viability, initial strength gain, etc.) Increased elasticity, heat resistance, vibration resistance, and stickiness of the adhesive; lower cost of ready-glue) and to enhance the consistency of glued-wood materials by decreasing the content of harmful substances in the adhesive and their emission. Market outlook: The phenolic resin market is primarily driven by the rising automotive industry. The main constraint to the growth of the phenolic resin market is environmental legislation regarding formaldehyde emissions. Manufacturers of phenolic resins have benefited from the adoption of modern nanotechnology. The global phenolic resins market is segmented into novolac resins, resol resins, and other types of resins. The key product class of phenolic resins is resol resins, which are manufactured under basic conditions with excess formaldehyde. The thermosetting plastics known as phenolic resin have a wide variety of applications. These plastics are solid, have a high thermal resistance, and are fire-resistant. There are two types of resin on the market: Related Projects:- Plastics, Polymers and Resins, Polypropylene (PP), Polystyrene (PS), Acrylonitrile butadiene styrene (ABS), Polyethylene terephthalate (PET), Polyester, PA, Poly(vinyl chloride) (PVC), Polyurethanes (PU), Polycarbonate (PC), Polyethylene (PE)Projects • Resol Resin and • Novolac Resin. • There are others Resol resin is classified as liquid or solid depending on its form. Wood adhesives, moulding, insulation, laminates, paper impregnation, coatings, and other applications are among the phenolic resin industry application segments. The use of phenolic resins in wood adhesives provides excellent water, moisture, and weather resistance, making it attractive in the construction industry. For More Details:- https://www.entrepreneurindia.co/project-and-profile-details/Production%20of%20Phenolic%20Formaldehyde%20Resin
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Business Plans for Startup a Production of Toughened Glass Best Investment Opportunities & Ideas in Glass Sector

Introduction: Toughened glass, also known as safety glass or tempered glass, is ordinary float glass that has been made force-resistant, making it six times more difficult to crack than regular glass panes. Furthermore, due to stress patterns inside the glass, if the glass does crack, it will break into small, blunt, cube-shaped pieces. In a nutshell, no one is harmed. Toughened glass, also known as tempered glass, is glass that has been strengthened by controlled thermal treatment. It's four times as solid as regular annealed glass. Toughened glass is made from annealed glass that has been rapidly cooled after being heated to approximately 6500C. The treatment produces different ph levels due to the increased heat treatment and rapid cooling of the glass. As a result, there is more compressive force on the surface and the glass's bending power improves. The glass must be cut to size or pressed to form before toughening. Related Projects: Toughened Glass Toughened glass is more thermally resistant than regular glass. The glass is subjected to extreme stress, which increases its intensity. This glass is manufactured using the thermal tempering process, which involves heating annealed glass to at least 720 degrees and cooling it quickly after it reaches that temperature. As a result, the glass becomes solid and strained. Uses of Toughened glass: Tempered glass is used in a range of applications, such as passenger vehicle windows, shower doors, aquariums, architectural glass doors and tables, refrigerator trays, cell phone screen protectors, bulletproof glass parts, diving masks, and plates and cookware, due to its protection and power. Tempered glass is also used in buildings for unframed assemblies (such as frameless glass doors), structurally loaded applications, and any other device where a human effect may be harmful. Some skylights, glass installed near doorways and stairways, wide windows, windows that reach close to floor level, sliding doors, elevators, fire department access panels, and glass installed near swimming pools are all examples of situations where tempered or laminated glass is required by building codes in the United States. Related Books: Minerals & Mineral Processing, Glass and Ceramics Toughened glass is commonly used for balcony doors, windows, facades, shower doors, bathroom doors, exhibition areas, and exhibits, among other applications. Tempered glass is used to make doors and windows for high-end industrial structures. Toughen glass is also used in construction projects. Toughened glass is used for frameless shower doors, glass shelves, and large fixed windows. Manufacturing Process: A thermal tempering process may be used to create tempered or toughened glass from annealed glass. The glass is mounted on a roller table and passed through a furnace that heats it to about 620 °C (1,148 °F), well above its transition temperature of 564 °C (1,047 °F). The glass is then quickly cooled using forced air draughts, with the inner portion of the glass remaining free to flow for a brief period of time. Through ion exchange of the sodium ions in the glass surface with potassium ions (which are 30 percent larger) in a bath of molten potassium nitrate, an alternative chemical toughening solution involves pressing a surface layer of glass at least 0.1 mm thick into compression. Chemical toughening, as opposed to thermal tempering, increases hardness and can be used on complex-shaped glass pieces. Nickel-sulfide, calcium oxide, silicon dioxide, and sodium oxide are among the major raw materials used in the production of this product. Volatility in raw material costs as a result of increased use in the construction and automotive industries could jeopardize industry profitability and affect the price of tempered glass. Toughened glass is annealed glass that has been subjected to a thermal tempering process. Related Videos: Glass, Flat Glass, Art Glass, Hollow Glass, Automotive Glass, Optical Glass, glass processing line, Glassware Industry A sheet of annealed glass is heated to above its "annealing point" of 600°C, then quickly cooled while the innards are removed. Different cooling rates cause different physical properties in the surface and inside of the glass, resulting in compressive stresses in the surface balanced by tensile stresses in the body of the glass. Toughened glass' improved mechanical resistance to breakage is due to these counteracting stresses, which also cause it to break into small, normal, usually square pieces rather than long, dangerous shards that are much more likely to cause injuries. Toughened glass is often more resistant to breaking as a result of stresses induced by temperature changes. Market Outlook: The Global Toughened Glass Consumption Market has been rising at a faster rate with strong growth rates over the last few years, and it is expected to expand significantly in the future. The demand for toughened glass is one of the markets in which investors have shown a lot of interest. Books: - BOOKS & DATABASES The global Tempered Glass Market is partially consolidated, with a few major players controlling a sizable portion of the market. The demand is driven by the increased use of tempered glass in the automotive and construction industries. Single, double, and triple pane tempered glass are available. Its application scope in the greenhouse sector is expanding, as it provides four to six times more shatter resistance than annealed varieties, which should boost tempered glass demand. Increased public awareness of energy-efficient and environmentally friendly construction would also aid the industry's development. Market Research: - Market Research Report Any glass that has been reheated and treated to the point where it is tenacious enough to withstand any collision is referred to as tempered glass. As a result, this material is widely used to ensure the protection of a structure, unit, or system. The tempered glass market is expected to expand at a CAGR of 4.95 percent over the forecast period of 2019-2025. This represents a significant increase over its global market sales of $41 billion in 2018. Construction application, which dominates the industry in terms of sales, has seen considerable growth in the Tempered Glass market. Key Players:- • Asahi India Glass Ltd. • Atul Glass Inds. Ltd. • Bhagwati Projects Pvt. Ltd. • Floatglass India Ltd. • Friends Glass & Glazing Pvt. Ltd. • Gold Plus Glasses India Ltd. • Gujarat Guardian Ltd. • Saint-Gobain Sekurit India Ltd. • Sejal Glass Ltd. • Sisecam Flat Glass India Pvt. Ltd. • T P R S Enterprises Pvt. Ltd. • Triplex Glass Works Pvt. Ltd. • Triveni Glass Ltd. For More Details:- https://niir.org/project-reports/projects/glass-flat-glass-art-glass-hollow-glass-automotive-glass-optical-glass-glass-processing-line-glassware-industry-ceramic-industrial-ceramics-production-ceramic-powder-refractory-pottery-mining-industry-metals-natural-resources-industry/z,,b,64,64/index.html?_sort_by=default #DetailedProjectReport #businessconsultant #BusinessPlan #feasibilityReport #NPCS #entrepreneurindia #startupbusiness #ProjectReport #startup #projectconsultancy #businessopportunity #NewBusinessPlan #BusinessProfessional #BusinessConsulting #GlassBusiness #ToughenedGlass #GlassManufacturing #GlassProduction #GlassIndustry #glassprocessing #glasstempering
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Want to Start Business of Baby Diaper (T-shape and Pull-up Pants)? Profitable Business Ideas for You

Introduction: In today's world, baby diapers are a great comfort. A baby diaper is a more sophisticated version of a nappy made of cotton and absorbent material that absorbs the waste material of the baby without making him feel wet after passing discharges. It keeps the baby's delicate skin dry and moisturized. It often lessens the incidence of rashes on the baby's face. Parents all over the world use baby diapers safely every day. Plastic outer skirts, ill-fitting terry cloth inners, and chronically wet skin for babies and infants are long gone. Disposable diapers are light, lightweight, absorbent, leak-proof, and simple to use today. The softness, lightness, and ‘breathability' of the fabrics used in baby diapers make them very easy to wear. Related Project: - DISPOSABLE BABY DIAPER Benefits of Using Baby Diaper: The primary goal of using a Baby diaper is to contain the moisture from the baby's faeces so that the baby does not get fussy or wake up due to the dampness. When a baby may engage in long-term activities while remaining flexible and relaxed, as well as sleep through the night, it benefits their growth and long-term physical and mental health. When your baby starts wriggling or rolling over during diaper changes to get away from you, any change can become a war of wills (which the smaller, cuter and chubbier one usually wins). Tape diapers easily become a setback until your baby is ready for potty training because they need your involvement to put on and take off. Tape diapers can sag or flip open on one side as a result of an older baby's vigorous playtime routine. Parents should change the tape under the baby's navel as needed for newborns whose umbilical cords have not yet fallen off. Books: - BOOKS & DATABASES Diapers for newborns now feature a soft touch surface that is gentle on the baby's delicate skin, as well as a unique curved waistband shape. The baby's navel region is well shielded from friction, so parents can rest easy. Manufacturing Process: An absorbent pad is sandwiched between two sheets of nonwoven fabric in a baby diaper. The nonwoven fabric gives the diaper a comfortable shape and helps avoid leakage. The absorbent pad is vacuum-formed first, then attached to a permeable top sheet and impermeable bottom sheet in a multi-step process. Heat or ultrasonic vibrations are used to seal the components together. Elastic fibres are added to the sheets to gather the diaper's edges into the correct form, ensuring that it fits snugly around the legs and crotch of an infant. The disposable diaper can hold body fluids that move through the permeable top sheet and are absorbed into the pad when properly equipped. Related Videos: - Sanitary Napkins, Baby and Adult Diapers, Feminine Hygiene Products, Sanitary Pads, Sanitary Towel, Menstrual Pad, Maxi Pad The majority of the methods used to monitor the consistency of Baby diapers are related to the absorbency of the product. One important factor to consider is the polymer/fiber ratio in the absorbent pad. The diaper's ability to absorb moisture would be harmed if there is too much variation. To integrate absorbent polymers into the pad, at least two methods have been used. One approach involves injecting the polymer into the same feedstock that supplies the fibres. This method produces a pad with an even distribution of absorbent polymer over its length, width, and thickness. Marketing Outlook The global baby diapers market was estimated at $52.6 billion in 2019 and is expected to grow at a CAGR of 5.0 percent to $68.3 billion by 2027. With shifting consumer tastes, the baby diaper market has become increasingly complex. Diaper fabric, absorption capabilities, and unique user-friendly features have all improved in recent years, allowing rivals to gain market share. Manufacturers are being forced to produce bio-based disposable diapers in response to the demand for natural and hygienic goods, which is expected to drive consumer demand. Market Research: - Market Research Report The region's dominance in the global diaper industry can be attributed to the region's growing population, which is due to high birth and fertility rates as well as longer life expectancy, as well as the rising number of adult incontinence patients. Other factors driving up diaper demand in the area include increased knowledge of baby hygiene and less reservations about using adult diapers. Disposable Baby diapers are likely to be favored by parents over other forms of diapers such as cloth, training nappy, and others due to their ease of use and comfort. Companies are concentrating on disposable diaper recycling as well as designing disposable diapers. Leading businesses are designing plants that recycle disposable diapers as part of a variety of initiatives. Hypermarkets/supermarkets, convenience stores, pharmacies/drug stores, online distribution channels, and others make up the baby diaper sector. Key Players: • Centron Industrial Alliance Ltd. • Diapers India Ltd. • Godrej Hygiene Products Ltd. • Johnson & Johnson Pvt. Ltd. • Kimberly-Clark India Pvt. Ltd. • Maple Biotech Pvt. Ltd. • Me N Moms Pvt. Ltd. • Nobel Hygiene Pvt. Ltd. • Procter & Gamble Home Products Pvt. Ltd. • S C A Hygiene Products India Pvt. Ltd. • Tainwala Personal Care Products Pvt. Ltd. • Unicharm India Pvt. Ltd. • Vandana Surgi Pharma Pvt. Ltd. For More Details: - https://www.entrepreneurindia.co/project-and-profile-listing.aspx?srch=Baby%20Diaper #DetailedProjectReport #businessconsultant #BusinessPlan #feasibilityReport #NPCS #entrepreneurindia #startupbusiness #ProjectReport #startup #projectconsultancy #businessopportunity #NewBusinessPlan #BusinessProfessional #BusinessConsulting #SanitaryNapkins #BabyDiapersMarket #BabyDiapersBusiness #BabyDiapersIndustry #DiaperMarket #DiaperMarketGrowth #BabyDiapersMarketTrend #BabyDiapers
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Fiberglass Wool Ceiling Tiles Manufacturing Business. Ideas and Opportunities for Entrepreneurs

INTRODUCTION A secondary ceiling, hung below the primary (structural) ceiling, is known as ceiling tiles. It's also known as a drop ceiling, T-bar ceiling, false ceiling, suspended ceiling, grid ceiling, drop in ceiling, drop out ceiling, or ceiling tiles, and it's a popular choice for both residential and commercial construction. Fiberglass acoustic ceiling tiles are lightweight and simple to handle, with excellent sound absorption. Mineral Fiber Ceiling Tiles have excellent thermal and acoustic insulation. Fiberglass and Mineral Fiber Ceiling Tiles are available in a variety of price points, with the best sound absorption (NRC) to help you achieve the best acoustics for your project. Fiberglass ceilings and Mineral Fiber Ceiling Tiles are available in a variety of fire-rated, naturally resistant to mould and mildew growth, compatible with standard suspension systems and perimeter trim, unique views such as form and blade, and texture, shape, and colour. Related books: Plastics And Polymers, Polyester Fibers, Pet & Preform, Medical, Expanded Plastics, Polyurethane, Polyamide, Polyester Fibers, Additives, Colourants And Fillers, Extrusion, Moulding, Mould Designs, Optical Glass, Reinforced, Films, HDPE, Thermoset Uses and Applications: Fiber Ceiling Tiles are acoustical and thermal ceiling tiles for suspended ceiling systems used in industrial, commercial, and institutional settings. This decorative mineral fibre ceiling tile will satisfy the designer's requirements for acoustic control, aesthetic appeal, and thermal efficiency. These tiles improve working performance, concentration, and reduce noise and tension caused by echo and white noises in offices. These ceiling panels eliminate echo and boom in theatres and lecture halls, making sound systems more audible, transparent, and crisp. When used with Uni steel Black Grid, black ceiling tiles minimise light reluctance and provide a non-intruding presence in the interior decor, making them suitable for cinemas and home theatres. • Suspended commercial ceilings • Multiplexes • Auditoriums • Movie theatres • Lecture Theatres • Public libraries • Offices that are open plan • meeting rooms for conferences • Studios for filming • Bars and Pubs • Home theatre systems • Yoga and meditation centres • Public areas Related Project: Investment Opportunities in Fiberglass Wool Ceiling Tiles Production Process Fiber ceilings are a sound-absorbing green building material that can be recycled. 1. The manufacturing of mineral wool decorative sound-absorbing panels is a lengthy process. Wet-laid wire netting, wet round wire netting, dry-laminating and moulding, and semi-drying methods are all available. Wet process is used by the majority of producers. It is formed by pulping, long wire netting, dewatering, slitting, drying, slitting, spraying, and finishing wet long wire netting. Wait for the entire wet process development process to be completed in two stages. The various raw materials are first mixed and processed into a substrate board, after which they are decorated. 2. Decorative processing Blind hole processing: Semi-finished products are rolled to create impermeable holes of various sizes and shapes to improve the sound absorption effect, and then edge processing, colouring, and drying are completed. Processing of printing plates: Blind hole plates are processed into vertical and horizontal grooves using special milling machines, or they are milled, coloured, and dried in a circular fashion. semi-finished items are painted with pre-matched paint and printed on a template on a printing machine, and the designs may also be sprinkled with fine sand and dried. Embossed plate processing: After the semi-finished product is coloured, different patterns are pressed out using embossed plates in a press, and then cut and tenoned. The relief plate is manufactured by a reputable company, and the manufacturing costs are substantial. Related Videos: Plastics Projects Market Outlook In 2020, the global ceiling tile market is expected to be worth USD 5.93 billion. From 2021 to 2028, it is projected to rise at a compound annual growth rate (CAGR) of 8.8%. Development in the commercial construction industry is expected to drive the market, with new office towers, institutional buildings, healthcare facilities, and malls being built all over the world. With growing demand for acoustic and thermal insulation, rising disposable income in developing countries, and changing customer preferences for home and office building aesthetics, the market is expected to expand. The market dynamics are expected to benefit from the use of sustainable and creative building methods that include the use of eco-friendly materials for ceilings, floors, and walls. Mineral fibres, metals, gypsum, fibreglass, plastics, and wood are among the raw material manufacturers with a wide presence on the market. Market Research: - Market Research Report Backward and forward integration techniques are being used by manufacturers to gain leverage over the quality of raw materials used to make tiles, as well as to increase their customer base by managing distribution networks. Several firms, including Armstrong Roof, Knauf, and ROCKWOOL INSULATION A/S, have invested in the development of ceiling tiles with high fire resistance properties, and the industry is expected to expand significantly. This is due to a rise in the demand for healthy residential, commercial, and industrial complex construction. Green building practises are expected to spread through developed economies in North America and Europe, as well as major developing regions in Asia Pacific, as people become more aware of the benefits of using environmentally sustainable building materials. In addition, key players' increasing adoption of reuse and recycling of building materials is expected to drive market growth in the coming years. Projects:- Project Reports & Profiles Few Indian Major Players • K-Flex India Pvt. Ltd. • Kingspan Jindal Pvt. Ltd. • Lloyd Insulations (I) Ltd. • Owens Corning Inds. (India) Pvt. Ltd. • Rock Wool (India) Pvt. Ltd. • Saint-Gobain Gyproc India Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Business & Investment Opportunity in Manufacturing of Glucose Saline. IV fluids Used in Hospitals, Nursing Homes

Introduction: IV fluids are almost universally administered to patients undergoing major operations, where they meet the need to retain intravascular volume at a time when it may be exhausted due to preoperative fasting, surgical blood loss, evaporation, urinary excretion, Anesthesia-induced vasodilation, fluid loss into the third room, and inflammatory mediator-induced albumin transcapillary leak Water, sugar, and salt are all essential for the body to work properly. Intravenous fluids (also known as 'IV' fluids) are liquids that are supplied to replace water, sugar, and salt that you may need if you are sick or undergoing surgery and are unable to eat or drink. IV fluids are injected directly into a vein with a drip. Related Project: GLUCOSE SALINE Intravenous therapy (also known as IV therapy) is a surgical procedure that involves injecting fluids, drugs, and nutrients into a patient's vein. Intravenous administration is widely used to rehydrate or provide nutrients to those who are unable to absorb food or water through their mouth. Since drugs and fluid replacement are delivered directly into the circulatory system and therefore easily spread, the intravenous route is the quickest way to administer them in the body. As a result, intravenous administration is often used for the administration of certain recreational drugs. Many therapies are given as a "bolus," or one-time injection, but they can also be given as an infusion or drip over time. Intravenous treatment administration or the placement of an intravenous line ("IV line") for later use is a technique that can only be done by a trained physician. Uses of Glucose Saline: In clinical medicine, intravenous solutions are often used to replace and maintain body fluids. In general, intravenous fluids are used as I.V drips for patients in nursing homes and hospitals that are dehydrated or have severe disabling conditions. Related Videos: Pharmaceutical, Drugs, Fine Chemicals, Bulk Drug Intermediates, Pharmaceutical Drugs, Pharma Drug Ingredients Intermediates, Pharmaceutical Bulk Drugs The body fluids are replanished with these intravenous fluids. Intravenous fluids (often abbreviated as 'IV' fluids) are liquids provided to replace water, sugar, and salt that you may need if you are sick or undergoing surgery and are unable to eat or drink normally. IV fluids are injected directly into a vein with a drip. IV rehydration was once a common method for athletes. Unless there is a medical exception, the World Anti-Doping Agency bans intravenous injections of more than 100mL every 12 hours. In addition to the risks associated with IV treatment, the US Anti-Doping Agency notes that "IVs can be used to change blood test outcomes." Related Books: Pharmaceutical, Drugs, Proteins Technology Handbooks Cover urine test results (by dilution) or administer banned substances in a way that would be removed from the body more easily in order to beat an anti-doping test (such as hematocrit when EPO or blood doping is used). Market Outlook: There are many varieties of intravenous solutions on the market, including isotonic, hypertonic, and hypotonic. Isotonic solutions are made up of normal saline (0.9 NaCl) and are used to substitute extracellular fluid in the treatment of hypernatremia. As electrolyte replenishers, hypotonic intravenous solutions of 0.45 percent NaCl are used. Increased prevalence of chronic and acute diseases, rise in the geriatric population, increase in strategic alliances between manufacturers to expand their product range and geographical presence, expansion in the pharmaceutical industry are all major drivers of the global intravenous solutions market. Market Research: - Market Research Report A rise in the demand for intravenous solutions in developed economies, as well as an increase in health-care spending however, the global intravenous solution market is expected to be restrained by factors such as a strict regulatory environment and high fluid maintenance costs. In the global economy, the intravenous (IV) solution market was rapidly growing and achieving a high market value. Intravenous solutions industry developments are supplying a variety of intravenous solutions to meet the needs of various types of patients. Key Players: • Amanta Healthcare Ltd. • Baxter Pharmaceuticals India Pvt. Ltd. • Bayer Pharmaceuticals Pvt. Ltd. • Denis Chem Lab Ltd. • Meridian Enterprises Pvt. Ltd. • Pfizer Healthcare India Pvt. Ltd. • Pfizer Ltd. • Pharmacia Healthcare Ltd. • Shree Krishna Keshav Laboratories Ltd. • Vikrant Pharmaceuticals Ltd. • Wockhardt Health Care Ltd. For More Details: - https://www.entrepreneurindia.co/project-and-profile-details/Business%20Plan%20of%20Glucose%20Saline%20Manufacturing
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

How to Start Your Own Helmet Manufacturing Company. Profitable Business Opportunities for Startups

Introduction A helmet is a type of head protection that is worn on the head. A helmet, in particular, works in conjunction with the skull to shield the human brain. Ceremonial or symbolic helmets (such as a police officer's helmet in the United Kingdom) with no protective feature are sometimes worn. Soldiers wear Kevlar or other lightweight synthetic fabrics in their combat helmets. The word helmet comes from the Old English word helm, which refers to a protective head covering. Helmets are worn by jockeys in horse racing, American football, ice hockey, cricket, baseball, camogie, hurling, and rock climbing, as well as in hazardous work environments such as manufacturing, mining, riot police, military aviation, and transportation (e.g. motorcycle helmets and bicycle helmets). Since the 1990s, the majority of helmets have been made of resin or plastic, which may be lined with aramid fibres. Helmets have a much broader range of uses, including helmets tailored to the unique needs of a variety of sporting pursuits and work environments, and these helmets often use plastics and other synthetic materials for their light weight and shock absorbing properties. Aramid fabrics, such as Kevlar and Twaron, are examples of synthetic fibres used to make helmets in the twenty-first century. In extreme crashes, race car helmets have a head and neck protection device that holds the helmet (and head) fixed to the body. Related Project: Helmet Manufacturing Industry Manufacturing Process of Helmet The unassuming motorcycle helmet you take for granted every day is the product of a laborious manufacturing and assembly process that includes many steps and quality checks along the way to ensure that you get the best quality and protection while riding on the road. Injection Molding the Child Parts: A motorcycle helmet is made up of several different child components. The EPS shell is one of the most essential child pieces. The journey starts with tiny polystyrene beads that are expanded under pressure and heat to make ‘foam,' as it is called in the industry. In scientific terms, extended polystyrene is now polystyrene (EPS). The non-expanded beads are fed into an injection moulding system, which produces an expanded polystyrene shell that serves as the motorcycle helmet's internal shell. However, this shell alone lacks the mechanical resistance to withstand high-impact forces, which is why it is protected by an ABS shell. Using industrial adhesive, all cells are joined together to form a single external structure. The visor in helmets is made in a similar way, using transparent polyurethane beans that are pressed together under high pressure and temperature to produce clear, mirrored, or rainbow-hued visors by adding various additives. Related projects: Automobile Industry and Auto Components, Automotive components, Spare parts, Auto Parts, Car Parts, Replacement Parts, Tractor Parts, Motorcycle Parts, Auto Body Parts, Two Wheeler, Three Wheeler and Four Wheeler Parts, Accessories & Spares Projects Buffing & Sanding The outer shell is then taken to the buffing and sanding station, where the entire structure is polished and the joining marks are removed. A special polishing machine and emery paper are used to smooth the surface left behind by the injection moulding machine. This not only removes any excess materials from the helmet's surface, but it also prepares the shell for the next steps in the painting process. It should be remembered that not all helmets are painted, and if this is the case, the helmet will continue to the assembly line today to have the visors and straps fitted before being packaged and shipped. Painting & Decals Following the buffing process, the helmet is thoroughly washed to remove any small particles or dust that could influence the overall outcome of the painting process. Many precautions are taken to ensure that no dust remains on the surface of the helmet, including rubbing the surface with industrial alcohol and subjecting it to vacuum machines where even the tiniest dust particle is fully removed until the helmet is sent to a hermetically sealed painting booth. The surface is painted with a base coat and then another layer of the primary colour, depending on the pre-decided colour and design choices. The colours and mixes are done by a professional, and the surface is painted with a painting gun. After this process is completed, the helmet is sent to the Assembly line's decal area, where expert workers apply decorative and colourful decals to the helmet and allow it to set for 3 to 4 hours (maximum of 8 hours) before returning to the paint shop for a final layer of top coat. Related Books: Automobile Industry, Automotive Components & Allied Products Engine Parts, Piston, Pin, Piston Ring, Valve, Control Cable, Engine Mounting, Auto Lock, Disc Brake, Drum, Gear, Leaf Spring, Shock Absorber, Silencer, Chain, Cylinder Block, Chassis, Battery Attaching the visors and straps Staff design the straps and strapping mechanism, as well as other rivets and bushes that go into the helmet to secure the strap in place, in a different section of the manufacturing unit. Staff on the production line combine the painted shell with the visor mechanism and the strapping mechanism using various specialised tools for punching holes and attaching the straps protection until the helmet leaves the paint shop. Die-cut and laser machines are used to precisely cut the pads and inner lining of the helmet with a precision of a few millimeters, ensuring the best comfort and protection for the user. Multiple quality checks Before being moved on to the next section of the Assembly Line on the manufacturing phase, each of the above phases undergoes a rigorous quality check at the end of the process to ensure that the child parts follow regulatory standards and internal quality parameters. To minimise waste, any component that does not meet the requisite quality parameters is discarded and recycled. The element becomes eligible to carry the ISI mark as well as the company's insignia until it is sent forward to be packed and shipped until the quality expert is fully satisfied that the helmet meets all requisite specifications and safety standards. Packaging & Shipping Finally, the completed product is packed and delivered to various locations around the world, along with documentation to assist the consumer in making the most of the product. Projects:- Project Reports & Profiles Market Outlook In 2018, the global smart helmet market was worth USD 372.4 million, and it is projected to develop at a CAGR of 18.6% from 2019 to 2025. Smart helmets are equipped with a variety of electronic devices and sensors that enable users to collect real-time data and, in the long run, reduce operational risks and improve safety. Helmets are becoming increasingly common among bicyclists and motorcyclists due to their increased protection, safety, and comfort. They're also seen in a variety of sporting activities, as well as military and firefighting operations. Government-imposed road safety regulations, the growing adoption of advanced wearable technology, and increased knowledge of personal safety are expected to drive demand. Asia Pacific is projected to be the fastest-growing regional market for smart helmets. The two-wheeler sales, rapid urbanisation in developing economies such as India and China, and the region's increasing manufacturing sector are expected to be the region's main growth drivers. Related Videos: Automobile Industry Market in India Due to increasingly stringent regulations for both commuters and helmet manufacturers in India, the two-wheeler helmet market is expected to expand at a double-digit pace. The selling of two-wheeler helmets is expected to continue growing across the country in the coming years, thanks to increased consumer spending on luxury goods and increased safety awareness. The government's new rules prohibiting the use of non-ISI helmets would only increase revenue for organized helmet manufacturers. Covid-19 has wreaked havoc on the Indian economy, but it has also provided an impetus for innovation. Our manufacturing plants were only closed for a few days before we began producing face shields, goggles, and masks. People will definitely return to their personal mode of transportation rather than using public transportation as social distancing becomes the new standard. Since two-wheelers are the most convenient mode of transportation in India, sales will increase, and there will be a large demand for used two-wheelers as well. This will undoubtedly increase demand for helmets. In addition, with the implementation of some stringent government policies, consumer demand is expected to rise. The market potential is significant, and the government's new policy prohibiting non-ISI approved helmets would provide a significant boost to organized players in the helmet industry by increasing demand. Both of these factors would only increase the helmet industry's revenue. Books:- BOOKS & DATABASES According to government estimates, road accidents cost 3% of GDP, and the amount of people killed in them is comparable to the current pandemic. As a result, the government is concentrating on improving rider safety by constantly updating themselves and implementing new regulations. For example, according to the Motor Vehicle Bill, all two-wheeler riders must now wear a helmet. Second, the government has enacted legislation prohibiting the manufacture, selling, and use of non-ISI approved helmets. This policy will take effect on March 1, 2021, and it will be a significant step in improving the safety of two-wheeler riders. Third, the government has acknowledged that limiting the weight of helmets limits the rider's protection, so the clause has been removed, which would allow organized players to produce quality helmets. All of these measures are intended to improve rider safety. List of Best Helmet Brands in India for Bike Riders: The best helmet brands in India are mentioned below. Some are regional, whereas others are global. They have a good online and offline presence for the most part. Go through the list below and connect with a brand that interests you the most. Please keep in mind that the following list of the best helmet brands in India is not in any particular order. • Vega: What started in India in 1982 has now spread across continents in 2020. Vega is a well-known brand that is also one of the most popular. The company has a wide variety of helmets and accessories, with an emphasis on both design and quality. • Steelbird: Steelbird Hi-tech India Ltd. is an excellent example of how a small family company grew into a well-known brand. Steelbird is a brand that caters to a wide range of consumer segments, with helmets ranging from open-face to Motocross. Customized helmets are also available. • Studds: Among Indian bikers, Studds is a well-known brand. In 1973, the company started operations. It is also known as the largest helmet maker in the world. Studds places a strong emphasis on consistency and creativity. It sells fashionable helmets as well as useful accessories. • LS2: LS2 is a globally recognised brand that has evolved as a result of its R&D efforts. Three pillars of the brand's success are in-house experience, precision assembly, and quality control. They have a large selection of designer helmets. Market Research: - Market Research Report • THH: THH stands for Tong-ho-Hsing and is based in Taiwan. Their helmets are known for being lightweight, ventilated, and constructed from high-quality materials. THH creates exciting models and graphics on a daily basis. In India, the company hopes to manufacture 10,000 helmets a day. • Wrangler: Wrangler is a well-known American brand. It is well-known for its apparel and accessories. Helmets from Wrangler are also common. In India, they sell open-face, full-face, half-face, and other types of helmets. They're fashionable yet remaining cost-effective. • Royal Enfield: Many who ride Royal Enfield motorcycles tend to wear a Royal Enfield helmet. Their helmets come in a variety of sizes and colours to complement various bike styles. They're stylish, easy, and long-lasting. • Aerostar: Aerostar helmets are reasonably priced. The company has a significant presence in the Indian market. It has a wide selection of high-quality helmets. • HJC: For over forty years, HJC Helmets has been serving motorcycle enthusiasts. Helmets for bicycles, motorcycles, and auto (car racing) are all available from the company. Their focus is on high-quality, fashionable designs. • SHOEI: SHOEI is recognised as the world's premium helmet manufacturer. Their goods are the result of extensive research and development. For bike riders, the company offers both on-road and off-road helmets. • Gliders: Gliders is a subsidiary of TP Industries and is based in India. Since 1993, the business has catered to the needs of bikers. Their helmets are recognised for their high quality and safety. In 2005, they launched NXT, a line of sporty helmets. Related Video: Helmet manufacturing business • Fastrack: Fastrack is a popular youth brand known for its watches. They later expanded into accessories such as eyewear and handbags. Bike helmets are another product line they've looked at. Fastrack helmets, like their other products, have an attractive style. • Autofy: This Company specialises in car accessories and riding clothing. They have a range of ‘interesting' items. Their helmets are uncomplicated but appealing. These helmets are available on their website for a reasonable price. They also offer promotional discounts. • AGV: Since 1947, the AGV brand has been at the forefront of providing helmets. It is a well-known brand that provides items tailored to a biker's riding style. They have appealing helmets in the racing, sport, touring, off-road, and urban categories. • Aaron: The headquarters of Aaron Helmets Pvt. Ltd. are in New Delhi. Aaron has risen to the top of India's helmet industry thanks to its innovation, efficiency, and science. They have everything from Bluetooth helmets to Moto-X helmets. Their collection is chock-full of eye-catching colours and patterns. • Manufacturas Tomas: MT is the abbreviation for Manufacturas Tomas. The company that makes these helmets is based in Spain. In Europe, MT helmets have a decent reputation. More than a hundred countries on five continents are represented by the brand. It provides a wide range of choices for bikers. • SMK: SMK is a manufacturer of technologically advanced helmets. They're not only clean, but they're also attractive. The SMK helmets are conceptualised and designed entirely in Europe. When it comes to SMK, style and protection go hand in hand. • Bell Helmets: One look at their catalogue will persuade you that their brand is exclusive. Their helmets are unlike any other on the market in terms of style. They have a wide variety of helmets to choose from, from classic to edgy. • ARAI: ARAI Helmets was founded in 1937. They've provided service to the market based on their security, efficiency, and comfort values. These helmets are made by hand by trained artisans. You will learn more about how they handcraft the helmets by visiting their website. • Shark: Shark is a French fashion label. Health, efficiency, and engineering are all priorities for them. If you're looking for high-end helmets, Shark helmets may be the answer. For More Details, Click Here: https://www.entrepreneurindia.co/project-and-profile-details/Helmet%20Manufacturing
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Emerging Business of Industrial Gases (Industrial Gases Market Size is expected to Rise Significantly) Start the Production Plant of Oxygen and Nitrogen Gas

Introduction: Industrial gases are used in a variety of industries and are gaseous at room temperature and pressure. Chemicals, electricity, medicine, electronics, aerospace, and even food are among these industries. These gases, as useful as they are, can be flammable and pose other risks. Gases, liquids, and cryogenic liquids are all possible uses for industrial gases. They are commonly accepted by industrial users as gases that are used in significant quantities in their pure form. No animal can survive without oxygen, which is a natural resource. Fish and other marine organisms depend on oxygen gas dissolved in water in the same way as humans do. Another money-saving option is an oxygen plant that includes a molecular screen battery drier device for moisture and carbon dioxide separation. It removes acetylene and other hydrocarbons from the process air, removing the need for separate acetylene absorbents and, more importantly, the expense of caustic soda. Related Projects: Oxygen and Nitrogen Gas Plant (Medical and Industrial Grade) Nitrogen gas is an inert gas that can be found in abundance in nature, both free and as part of industrially important compounds. Nitrogen gas is colourless, odourless, and tasteless, as well as being inert. These characteristics make it suitable for use in a variety of manufacturing processes, but they also make it a potential safety hazard for workers. As a result, nitrogen gas producers and consumers must take sufficient nitrogen safety measures. The chemical element nitrogen has the symbol N and the atomic number 7. Nitrogen is the lightest element of Periodic Group 15, also known as the pnictogens. It is a common factor in the universe, with a total abundance estimated to be about seventh in the Milky Way and Solar System. Two atoms of the element join together at normal temperature and pressure to form dinitrogen, a colourless and odourless diatomic gas with the formula N2. Uses of Oxygen and Nitrogen Gas Plant: The industrial and medical gases industries represent a sizable number of customers in the city. Industrial gases are needed in almost all manufacturing processes. In the essential and infrastructure sectors, large amounts of oxygen, nitrogen, and argon are used. For cutting and welding, shipyards and the automotive industry use acetylene, propane, and mixtures of fuel gases and oxygen. In the recycling of plastics, packaging, and scrap tyres, liquid nitrogen is important. All major industrial gases are used as a raw material or for inerting in the chemical industry. Cylinder gas and mixtures make up the other smaller industry group. In steelmaking, oxygen is needed for the reaction that converts carbon to carbon dioxide gas, which occurs at high temperatures in a blast furnace. The carbon dioxide emitted enables iron oxides to be reduced to more pure iron compounds. Other applications that include metal and require high temperatures, such as welding torches, use oxygen. Hydrocarbon molecules are broken apart by heating, and oxygen is used to degrade them. This is used to generate combustion, which produces water and carbon dioxide in most cases, but also the hydrocarbons acetylene, propylene, and ethylene in some cases. Nitrogen gas is used by some factories on a daily basis in remote areas. Related Project: Oxygen and Nitrogen Gas Plant Due to safety concerns and time delays, delivering liquid nitrogen to these locations is not feasible. It is important for industries such as chemical production, offshore drilling, and some pharmaceutical firms to have on-site nitrogen. On-site nitrogen generation not only ensures a consistent nitrogen solution, but it also helps these industries to adjust their purity levels depending on the application. The importance of nitrogen as a purging gas in the steel industry cannot be overstated. It's used as an assist gas to blast molten material away, resulting in a better, corrosion-resistant stainless or aluminized steel product. When formation pressures start to dwindle, nitrogen produced by various standard methods can be injected into an oil reservoir as an enhanced oil recovery technique. These secondary recovery strategies can restore and extend the life of well-produced goods. Manufacturing of Oxygen and Nitrogen Gas Plant: Compressed oxygen, liquid oxygen, and nitrogen are the four materials. d) All liquid nitrogen is extracted in the same plant from air. The raw material, air, is cryogenically liquefied, and the liquid oxygen and liquid nitrogen components are separated in a fractional distillation column. Compressors / pumps bottle compressed oxygen and nitrogen gases into cylinders. After vaporisation of the respective liquid fractions, compressed oxygen and nitrogen gases are bottled into cylinders by compressors / pumps. The air is compressed to a pressure of 30kg/cm2 in three steps. Following that, water vapour and carbon dioxide are removed using a battery of molecular sieves. The carbon dioxide and water vapor-free air is compressed still more to a pressure. External refrigeration is used to compress the outgoing carbon dioxide and water vapour free air to a pressure of 100 kg/cm2 and cool it significantly. The outgoing product gases cool the high-pressure air even further in heat exchangers. The majority of the cold air is allowed to expand via an expansion motor, while the remainder is redirected via an expansion valve. The expansion engine's downstream air reaches a pressure of 5 kg/cm2 and a significantly lower temperature. Partially liquefaction of air occurs when the other stream of air passing through the expansion valve is extended to a pressure of 5kg/cm2. Related Videos: Industrial, Medical and Specialty Gases Manufacturing Project Ideas Both streams of air are combined and added to the bottom column of the double rectification column as a liquid vapour mixture (fractional Distillation Column). Because of mass and heat transfer at each perforated tray in the column, nitrogen-rich liquid vapour collects at the top trays, while an oxygen-rich liquid-vapor mixture collects at the bottom trays. The liquid nitrogen that has accumulated at the top of the bottom column is drawn out and stored in vacuum-insulated cryogenic tanks as a product. This liquid nitrogen is pumped from the storage tank via vaporizers for gasification and bottling into cylinders to produce nitrogen gas. The oxygen-rich liquid-vapor mixture at the bottom column's sump is redirected to the distillation column's top column, which operates at a lower pressure of 0.5kg/cm2. Further separation of oxygen and nitrogen vapour occurs in this low-pressure column through a mass and heat transfer process at the various trays inside the column. Related Books: - BOOKS & DATABASES Due to heat exchange with the cooler liquid nitrogen produced at the top of the bottom column, the separated oxygen vapours settle at the bottom of this column and condense to form liquid oxygen. The liquid oxygen that has accumulated at the bottom of the top column is extracted as a result and stored in vacuum-insulated cryogenic tanks. This liquid oxygen can be vaporised by heat exchange between incoming process airs and compressed by oxygen compressors for bottling into cylinders to produce compressed oxygen. Alternatively, the stored liquid oxygen may be pumped into vaporizers for gasification and cylinder filling. The plant's processing modes can be changed to produce: 1) Liquid nitrogen and compressed oxygen, with in-built vaporizers filling compressed oxygen, or 2) Liquid oxygen only, with external vaporizers filling compressed oxygen, depending on requirements. Market Outlook: The rising demand for alternative energy sources is driving the growth of the industrial gases industry. Furthermore, the global industrial gases market is being driven by increasing demand for industrial gases in the health care sector. In the other side, the government is strict. Its business development is being hampered by laws and regulations relating to environmental emissions and safety concerns. At a compound annual growth rate (CAGR) of -0.9 percent, the global industrial gas demand is forecast to decrease from $101.8 billion in 2019 to $100.9 billion in 2020. The industrial gases industry is expanding due to growing demand for renewable energy sources. Furthermore, rising demand for industrial gases in the health-care sector is driving the global industrial gases market. The government, on the other hand, is strict. However, the industrial gases industry is capital-intensive and needs significant investment, which may be a limiting factor in the market's growth. The global industrial gases market has a plethora of growth prospects in emerging economies. Increasing Demand of Oxygen Gas Due to Covid-19: The COVID-19 epidemic resulted in a major rise in global demand for medical oxygen. The rising prevalence of chronic diseases and infectious diseases such as Covid-19, cancer, asthma, diabetes, heart attack, and others, as well as an increase in the global geriatric population, are driving the medical oxygen gas cylinders industry. The compressed oxygen gas in commercial oxygen gas cylinders is used for medical purposes. Patients suffering from illnesses such as asthma, cancer, and others benefit greatly from medical oxygen gas cylinders. The primary goal of an oxygen cylinder is to keep the body supplied with pure oxygen. Oxygen cylinders are in high demand in hospitals, home care settings, and other places. With the number of Covid-19 cases in the electricity approaching 19,000, demand for oxygen has increased as a result of patients needing breathing assistance due to the disease's lung complications. Now is the time to put medical oxygen first. Oxygen should be viewed as a critical utility, much like electricity. Key Players: • Air Liquide India Holding Pvt. Ltd. • Arrow Oxygen Ltd. • Bellary Oxygen Co. Pvt. Ltd. • Bhagawati Oxygen Ltd. • Bhilai Oxygen Ltd. • Govind Poy Oxygen Ltd. • Howrah Gases Ltd. • Linde India Ltd. • Madhav Industrial Gases Pvt. Ltd. • Niket Udyog Ltd. • Praxair India Pvt. Ltd. • Pushya Industrial Gases Ltd. • Rukmani Metals & Gaseous Pvt. Ltd. • Saraogi Oxygen Ltd. • Southern Gas Ltd. • Travancore Oxygen Ltd. For More Details: https://niir.org/profile-project-reports/profiles/industrial-gases-projects/z,,23,0,a/index.html
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Want to Start Business of Wine? Here is Good Profitable Ideas for you that How to Start Production of Wine from Pineapple and Ginger

Introduction: Fruit wines are similar to regular wines, with the exception that the fruits used are not grapes. Fruit wine is made from fermented fruit juice, but floral wines like dandelion wine, elderflower wine, and rose hip wine are also classified as fruit wines. Only the fermentation of fruits, or more precisely, the alcoholic fermentation of sugars, produces alcohol. As a result, neither alcohol nor distillation are used. That is why neither liqueur nor schnapps are made from the fruit of wines (grog, hard liqueur). Ginger wine has a spicy, soft, and sour flavour profile. Ginger is a warm spice, but this wine is better enjoyed in the winter. This old-fashioned cocktail is incredible. Related Books: - Alcohol And Alcohol Based Industries, Alcoholic And Non Alcoholic Beverages, Fruit Juices, Whisky, Beer, Rum, Wine And Sugarcane Bye Products The best thing about Ginger Wine is that it can be stored for a longer period of time, and the longer it is stored, the better. The best thing about Ginger Wine is that it can be kept for a long time, and the longer you keep it, the stronger the flavour of this flavoured wine will get. The ginger wine will aid digestion of the heavy meal. This wine is fermented ahead of time to ensure that it has the right flavour. Ginger wine is less acidic and has a more nuanced flavour profile than ginger beer. It's also not carbonated, though it goes well with carbonated drinks. It is not interchangeable with ginger liqueur because it is thinner, less sweet, and less spicy. Pineapple wine is a fermented pineapple-based alcoholic beverage. It's called a wine because the method of production is similar to that of conventional grape wines. Pineapples are one of the sweetest fruits on the planet, and their high sugar content is ideal for making wine. The pineapple flavour and natural acidity shine through in the finished wine, which tastes like a pineapple-flavored Sauvignon Blanc. Benefits of Wine from Ginger & Pineapple: Fruit wines, like all foods, contain a variety of volatile compounds that work independently and in concert to create a diverse range of aromas, tastes, and mouthfeels. Pineapple wine is used to lower fevers and alleviate indigestion. Pineapples have a moderate amount of sugar and acidity, and the form and strain of yeast used to ferment them affects the consistency of the wine. The type and strain of yeast used to ferment pineapple juice into pineapple wine also affects the consistency of pineapple wine. Related projects: - Beer and Wine Projects Bromeliad, a group of digestive enzymes that breaks down proteins, is found in pineapple wine. This can help those with pancreatic insufficiency digest their food. Ginger Wine is a delicious drink on its own, and with a low ABV of just 13%, it's a great alternative to higher alcohol spirits. Ginger wine aids in the maintenance of healthy joints. Of course, it quickly eliminates pain. It has the ability to treat problems with the bones and joints. It's also an effective remedy for nausea. At festive times, ginger wine is commonly used to make a non-alcoholic 'ginger wine' that is popular among children and teetotal households. It's sweet, warming, and soothing, and the gingery fire feels like it's actually doing some good. Perfect for a light drink, particularly if you have a sore throat, or if you're having digestive problems. Manufacturing process: Fruit wine can be made from almost any fermentable plant material. Wine can be made from nearly all fruits and berries. Pressing the juice, stewing, and fermenting the pulp of the fruits are typical methods of extracting flavour and juice from the fruits or plants being used. Many fruit wines lack the natural yeast nutrients that are needed to encourage or sustain fermentation. Winemakers can combat this by adding nitrogen, phosphorus, and potassium, which are commercially available as yeast nutrients. Related Videos:- Beverages, Fruit Juice, Alcohol, Wine, Whisky, Mineral Water, Packaged Drinking Water, Beer, Energy Drinks, Hard and Soft Drinks, Alcoholic and Non-Alcoholic Fruit wines, according to one wine journalist, seldom improve with age in the bottle and are typically intended to be consumed within a year of bottling. Pineapple juice is used to make pineapple wine. The pineapple juice is fermented in temperature-controlled vats and stopped when it is nearly dry. The outcome is a fruit wine that is sweet, dry, and has a good pineapple aroma. Pineapple wine is widely consumed in Thailand and other Southeast Asian countries, where it is produced using traditional methods and is not commercially available. Tepache are fermented pineapple beverages that are very common in Mexico. Market Outlook: Fruit wine is made from the juice of ripe fruits that has been naturally fermented with yeast. Fruit wine gets its alcohol from natural fermentation of the grapes, and its alcohol content usually ranges from 5% to 15%. Yeasts need sugar to produce alcohol in order to increase their alcohol content. The capitalization procedure is an alcohol enrichment procedure. Capitalization is a method of enhancing the alcohol content of fruit wines by adding sugar. The global wine market is expected to rise at a 4.28 percent compound annual growth rate (CAGR). Profile- Project Reports & Profiles The Global Fruit Wine Market has been rising at a faster rate with strong growth rates over the last few years, and it is expected to expand significantly in the future. Fruit wine production also needs less inventory, which helps to drive the global fruit wine market. However, technical issues such as acid stability and sugar quantity changes for fruit wine producers can limit the global fruit wine market. Some of the most common challenges faced by winemakers include the processing of high-quality fruits, fermentation as a vital process, pH tests, and so on. The global fruit wine market is being driven by consumers who want to try new varieties. Aside from that, the global fruit wine market is driven by perceptions such as refreshing taste, suits well with any form of cuisine, is a very royal and style brand, is good, and so on. Fruit wine production also needs less inventory, which helps to drive the global fruit wine market. Key Players: • Century Wines Pvt. Ltd. • Charosa Wineries Ltd. • Four Seasons Wines Ltd. • Grover Zampa Vineyards Ltd. • ndage Vintners Ltd. • N D Wines Pvt. Ltd. • Nirvana Biosys Pvt. Ltd. • Oakwood Winery Pvt. Ltd. • Sula Vineyards Pvt. Ltd. • Sunmeera Grapes Wineries Pvt. Ltd. • Venus Cellars Pvt. Ltd. • York Winery Pvt. Ltd. #DetailedProjectReport #businessconsultant #BusinessPlan #feasibilityReport #NPCS #entrepreneurindia #startupbusiness #ProjectReport #startup #projectconsultancy #businessopportunity #GingerWine #PineappleWine #FruitWine #FruitWineMarket #WineIndustry #WineBusiness #WineProduction #WineProductionProcess #WineMarket #WineManufacturing #winepackaging #WinemakingBusiness #Winemaking #Winemaking
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start a production of Healthy & tasty Snack Food Set up an Innovative Business of Apple Chips

Introduction: Apple chips or crisps are apple-based chips or crisps. Apple chips get drier and crispier as they become dry. Apples, contrary to popular opinion, are not poisonous. When chips get stale, they become tougher rather than chewier. Cooked, deep fried, vacuum fried, dehydrated, or baked apple chips are all options. Apple chips can be thick and crispy, or they can be puffy but still crisp. Apple chips with a puffy and crispy texture can be made using microwave vacuum-drying. They can be sweetened with confectioners' sugar and flavoured with cinnamon. Apple chips are a snack food that can be served with a variety of dips and other snacks. Related projects: - Ready to Eat Food, RTE Food, Ready to Serve Food, Ready to Cook Food, Convenience Food, No-Cook Food, Packaged Food, Processed Food Products, Snack Foods, Frozen Foods, Shelf-Stable Foods, Instant Foods Projects Apples are one of the most common fruits that you can eat on a daily basis. With a market share of 62 percent, Asia-Pacific is the world leader in fresh apple consumption. China is the world's largest producer of apples. Apples are the most widely eaten fruit in China. China continues to be the world's largest apple consumer, with 40 million metric tonnes consumed annually, accounting for roughly 48% of total volume. China was the second-largest apple producer, consuming 4 million tonnes. Fresh apples are high in fibre, phytonutrients in the flesh, and fructose, which is a natural sugar. Apple chips are a nutritious snack made from various apple varieties. Cinnamon brings out the flavour of the apples, and baking them for a few hours at a low temperature guarantees super crispy chips. Benefits of Apple Chips: Some people believe that baked fruits aren't as nutritious as fresh fruits. This is a fallacy that needs to be debunked once and for all. It's because baked fruits, such as apples, provide many health benefits for people of all ages. Dried apples are light, crisp, and tasty, and they're packed with nutrients. Sodium, fat, and cholesterol are all low in Apple Chips. Apples are a good source of vitamin C and fibre, although they lack protein. Related Videos: - Food Processing and Agriculture Based Projects Apple may be used as a natural flavouring agent in a variety of baked goods, including muffins, breads, crisps, pies, and other baked goods. These apple bites are also a great snack option for your children. Apple chips are high in antioxidants, especially polyphenols. These are substances that help in the battle against free radical damage to your cells. Apple chips contain no fat, making them a perfect snack for people who are trying to lose weight. They're also naturally sweet, making them a great match for nutritious foods like salads and vegetables. Manufacturing of Apple chips: Consumers are likely to be very interested in crisp apple chips that are low in fat and high in fibre. Before each experiment, apples were washed and cut into discs with a diameter of 18 mm and a thickness of 2-3 mm. The apple discs were osmotically treated with 40 percent glucose solutions before being dried in a convective dryer at 105 degrees Celsius. Compression/penetration tests were used to determine texture properties, while L*, a*, and b* colour values were registered by colorimeter and used to calculate the browning index. A group of 50 untrained panellists were used to conduct sensory analysis of the chips. Related Books: - Snack Food The panel group showed a high percent of approval on the Hedonic scale from the sensory study. For the apple chips, the different osmotic solutions resulted in 53 percent water loss and less than 5% solute uptake. The control samples had a penetration force of about 3N. The final samples, however, were much tougher and crispier than the fresh apples after drying. The browning index of fresh apples and apple chips did not vary in a statistically significant way. The Apples go through a lengthy process to create the ideal Apple chips. Peeling, slicing, drying, baking, and flavouring the chips are all steps in the process. Market Outlook: Apples are regarded as a nutritious food that, in addition to being eaten fresh, can also be consumed as dried fruits or as a component of fruit-based snacks. The global snack food market is expected to expand at a 5.34 percent compound annual growth rate (CAGR). With the change in consumer behavior trends, snack food has emerged as a viable alternative to full-fledged meals. The growth of the snacks industry has been fueled by rising disposable incomes as a result of urbanization and a growing preference for convenience foods. The number of independent working women, dual-income households, and nuclear families is on the rise around the world. The demand for convenience food has increased dramatically as a result of this demographic shift. Snack food is seen as the most convenient alternative to normal food, as it can be eaten at any time (such as, during breakfast, lunch of dinner purpose). Market Research: - Market Research Report Salted snacks, bakery snacks, confectionery, specialty & frozen snacks make up the global snack food industry. The bakery snacks segment has the most market penetration, while salted snacks such as Apple chips, corn chips, tortilla chips, popcorn, pretzels, and other salted snacks are expected to expand the most during the forecast period. In the last decade, young Indians' preference for on-the-go, dry snacks has increased significantly. Apple chips, salted savory snacks, and traditional sweets continue to dominate the Indian snack market, but new flavours are on the rise. Because of globalization, overseas travel, and exposure to new products and tastes, the category of healthy snacks (such as Apple Chips, Banana Chips, and so on) is rapidly gaining acceptance among Indians. Key Players:- • Skb Food Products Pvt. Ltd. • Crazzy Chips • Sipla Fruit Products • Preeti Fruit Company • Rpml India Pvt. Ltd. • Kiwi Foods India Pvt. Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 198 of 262 | Total 2620 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 198 261 262   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top