Google Search

Search

Already a Member ?

Best Business Opportunities in Meghalaya- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Meghalaya is a state in north-east India. The name means "the abode of clouds" in Sanskrit. As of 2011, the state has a population of 2,964,007 and is the 23rd most populous in the country. The population of Meghalaya as of 2014 is estimated to be 3,211,474. Meghalaya covers an area of approximately 22,430 square kilometers, with a length to breadth ratio of about 3:1

Meghalaya is predominantly an agrarian economy. Agriculture and allied activities engage nearly two-thirds of the total work force in Meghalaya. However, the contribution of this sector to the State's NSDP is only about one-third. Agriculture in the state is characterized by low productivity and unsustainable farm practices. Despite the large percentage of population engaged in agriculture, the state imports food from other Indian states.


TOURISM

 Meghalaya has some of the thickest surviving forests in the country and therefore constitutes one of the most important ecotourism circuit’s in India. The Meghalaya subtropical forests support a vast variety of flora and fauna. Meghalaya has 2 National Parks and 3 Wildlife Sanctuaries.   Meghalaya also offers many adventure tourism opportunities in the form of mountaineering, rock climbing, and trekking and hiking, water sports etc. The state offers several trekking routes, some of which also afford an opportunity to encounter rare animals such as slow loris, assorted deer and bear. The Umiam Lake has a water sports complex with facilities such as rowboats, paddleboats, sailing boats, cruise-boats, water-scooters and speedboats. Tourism in India is a growing industry, and as per World Tourism Organization predictions, India will be a leader in using tourism as an employment generator. The State of Meghalaya must be placed in a strategic position to take advantage of this growth.

“MEGHALAYA TOURISM DEVELOPMENT CORPORATION” has been set up for developing and promotion of Tourism in Meghalaya. The Corporation shall make efforts to increase its revenue to enable to carry out promotional activities. MTDC will organize package tours not only to Cherrapunjee but to other tourist destinations; organize training for guides, etc.

INDUSTRIAL SECTOR

The New Industrial & Investment Promotion Policy is designed to facilitate investments in new sectors across the State and thus ensure accelerated and sustained growth. The Policy focuses to attract, facilitate and promote wider expectations and high end investment.

There is an urgent need to promote investment in backward and difficult but resource rich areas. Therefore the policy provides additional incentives and support for such investments.


OBJECTIVE OF THE POLICY

•        To promote investment in all sectors

•        Generate employment opportunities for the local people in the industries and allied sectors.

•        To provide special incentives for promoting local Entrepreneurs in setting up of micro, small & medium manufacturing and service enterprises.

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage.

•        Achieve a balanced and growth oriented development covering the entire state through promotion of village and small scale industries.

•        Encourage need based development of local entrepreneurial skills through intensive motivation and training programmes at District, Sub-division and Block levels.

•        Provide guidance to prospective entrepreneurs by building up a data bank of project-profiles and other connected information. Special support to local entrepreneurs will be provided, and monitoring will be done to enable them to be successful.

•        Simplify rules and procedures by providing a single-window clearance facility for all investment proposals as applicable.

•        Promote Tourism, and make Meghalaya a tourist destination.

•        Promote IT as industries.

•        Promote first generation entrepreneurs. Government will encourage setting up of Entrepreneurship Development Institute by private or in PPP mode.

SALIENT FEATURES OF THE INDUSTRIAL POLICY

•        State Government believes in promoting private enterprises for speedy economic development of the State. The Government also stands committed to ensuring the healthy growth of existing industries. For this purpose, Government will ensure optimum number of industries by not permitting excess in any specific sector, thereby ensuring sustainability of existing business.

•        Enterprises promoted and managed by “Woman Entrepreneur”/physically challenged will get additional 10 % (ten percent) incentives on the State Capital Investment Subsidy.

•        Meghalaya has a long international border which needs immediate attention for development. To address this issue, 10 Kms towards the State from the International border is declared as “PRIORITY AREA” and enterprises set up within the 10 Kms area will be given special incentives to be known as “Border Area Subsidy”.

•        Government of Meghalaya recognizes:

1.       Hotels (not below two star category) and Amusement Parks.

2.       Medical and health services in the nature of nursing homes with a minimum capacity of 25 beds and Super – Specialty Health Care.

3.       Vocational training Institutes.


INDUSTRIES IDENTIFIED AS THRUST AREAS

                    Agro Based Industries :

   Horticulture – Based Units

   Biotechnology Based Units

   Medicinal Plants, Tea and Rubber

                       Animal Husbandry and Meat Processing Industries

         Development of Mineral based Industries:

      Coal-Based Industries

     Limestone Based Industries- Cement Plants, Lime Plants,

                      Calcium Carbide   Plants.

                       Electronics & Information Technology

INCENTIVES FOR LARGE AND MEDIUM SCALE INDUSTRIES

•        For large and medium scale industries, there are subsidies like capital investment subsidy, interest subsidy, power subsidy, subsidy on cost of pollution/quality-control measures, special subsidy for pioneer units in backward areas etc.

•        Exemption from the payment of applicable service tax for seven years to a "Tourism Unit"

•        Sales Tax exemption on sale of finished products for a period of seven years from the date of commercial production.

•        Reimbursement of Central Sales Tax (CST) paid on purchase of Capital Equipment installed till the date of project commissioning.

•        Partial exemption for applicable stamp duty.

INVESTMENT POLICIES

Meghalaya Government has always endeavored to set up the right kind of business climate to motivate investments in the State. In order to attract investment to the various sectors and thus contribute to the development of the economy as a whole.

The major being the industrial policy, which had been announced with a view to take advantage of the liberalized economic scenario in the country and also to keep pace with development in the national industrial sector are-

•        Generate employment opportunities for the local people in the industries and allied sectors

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage. Create a conducive environment for industrial development by creation of the basic Infrastructural facilities and by setting up of industrial areas, growth centre and export promotion industrial park.

•        Provide preference to local Entrepreneurship in setting up of large, medium and small-scale units.

•        Promote local interests through joint ventures with external investors so as to facilitate technology transfer and capital flow by a package of suitable incentives.

•        Encourage setting up of export-oriented, Agro based, Mineral-based, Horticultural based and Electronic units as thrust area.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 177 of 262 | Total 2620 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 177 261 262   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Essential Oil (Lemongrass, Citronella, Lavender, Rosemary and Peppermint)

Essential oils, also called volatile odoriferous oil, are aromatic oily liquids extracted from different parts of plants, for example, leaves, peels, barks, flowers, buds, seeds, and so on. They can be extracted from plant materials by several methods, steam distillation, solvent extraction, and so on. Among all methods, for example, steam distillation method has been widely used, especially for commercial scale production. Essential oils have been widely used as food flavors. Essential oils found in many different plants, especially the aromatic plants, vary in odor and flavor, which are governed by the types and amount of constituents present in oils. Essential oils are highly concentrated, low volume, high value products. The world of essential oils has since then come out from the narrow field of definition to a wide variety of applications in flavours, disinfectants, oral hygiene, tobacco, pharmaceuticals and in almost all spheres of human activity. In the world wide flavour and fragrance market, essential oils constitute about 17 per cent. The estimate of world production of essential oils varies from 40,000 to 60,000 tonnes per annum. Lemongrass is an herb that belongs to the grass family of Poaceae. Lemongrass is also known by Cymbopogon; it is a genus of about 55 species of grasses. Citronella oil is steam distilled from the leafy parts of the citronella plant, also known as Cymbopogonnardus. Citronella essential oil is a common element in perfumes and cosmetic products and is well known for its use in outdoor candles, sprays, lotions, and other camping and outdoor essentials. Lavender essential oil has been found to eliminate harmful bacteria, relieve muscle spasms, relieve flatulence, disinfect and soothe inflamed skin especially when resulting from a venomous, itchy bug bite, promote speedy healing of irritated and scarred skin, and to relieve muscle tension when used in a massage. Rosemary is a fragrant herb that is native to the Mediterranean and receives its name from the Latin words “ros” (dew) and “marinus” (sea), which means “dew of the Sea.”Rosemary Essential Oil is derived from the aromatic herb Rosmarinus Officinalis, a plant belonging to the Mint family, which includes Basil, Lavender, Myrtle, and Sage. Its appearance, too, is similar to Lavender with flat pine needles that have a light trace of silver. The increasing importance of natural extracts as pharmaceutical & natural cosmetic aid and their use as nutraceutical ingredients in recent times has opened up new vistas for this sector besides their widespread use as flavor & fragrance ingredients. India will play a dominant role in the production & processing of these natural extracts. Country's biodiversity coupled with competent scientific force, make our country as the best choice to become a foremost leader in aroma business in the coming years. The world's total production of essential oils is estimated at about 1,00,000-1,10,000 tons and India stands at No. 3 contributor with a share of 16-17 percent. In value terms India's position is No.2 with the share of 21-22 percent, thanks to mint revolution in North India. India essential oils market will surpass USD 790 million up to 2024. Adoption of sustainable agriculture techniques which has led to large scale production raw materials including lemongrass, citronella, lavender, rosemary and peppermint for oil extraction will propel industry growth. The growth of the essential oils market can be attributed to usage of essential oils in various applications such as flavor & fragrance, aromatherapies, and others. Moreover, healing benefits of essential oil are expected to be instrumental in governing peak sales paving the way for essential oils market growth. Furthermore, wide scale adoption of essential oils in industrial, commercial, and household applications also drive the global market. However, high price of essential oils act as the major restraint for the market. On the contrary, increase in demand for essential oil as natural preservatives is expected to provide opportunities for the growth of the essential oils market. The global mint essential oil market demand was USD 177.88 million in 2018 and is expected to expand at a 9.2% CAGR over the forecast period. Noteworthy growth of end-use industries, such as aromatherapy, personal care and cosmetics, pharmaceuticals and food and beverage are expected to propel the product demand in the forthcoming years. Rapid technological advancements in oil extraction methods is anticipated to fuel the production and positively influence the growth. Essential oils have found a secure purpose in the food and beverage industry. Instead of adding herbs, and juices directly, a drop or two of essential oils is being used to enhance the flavor of a dish. This helps in accentuating the needed flavor, while preserving the need for increased usage of herbs. A flavoring and preservation agents profile leads to robust essential oils market growth. Few Indian major players are as under Vinayak Ingredients (India) Pvt. Ltd. Vaishali (India) Ltd. Ultra International Ltd. Synthite Industries Pvt. Ltd. Kancor Ingredients Ltd. Jindal Drugs Pvt. Ltd. Industrial Perfumes Ltd. Concert Spices & Exports Ltd.
Plant capacity: Lemongrass Oil (10 ml Size Pack): 2.0 Ltrs / Day Citronella Oil (10 ml Size Pack): 2.0 Ltrs / Day Lavender Oil (10 ml Size Pack): 2.0 Ltrs / Day Rosemary Oil (10 ml Size Pack): 2.0 Ltrs / Day Peppermint Oil (10 ml Size Pack): 2.0 Ltrs / DayPlant & machinery: Rs 41 lakhs
Working capital: -T.C.I: Cost of Project: Rs 90 lakhs
Return: 31.00%Break even: 71.00%
Add to Inquiry Add to Inquiry Basket

Active Zinc Oxide from Zinc Ash, Secondary Zinc Waste & EAF Dust

Active Zinc oxide is a chemical compound with formula ZnO. It occurs as white hexagonal crystals or a white powder commonly known as zinc white which is used as a pigment in paints. It is nearly insoluble in water but soluble in acids or alkalis. Chinese white is a special grade of zinc white and used in artists' pigments. Zinc oxide and stearic acid are important ingredients in the commercial manufacture of rubber goods. Active Zinc oxide is valuable and growth-oriented product both for direct application and production of other zinc compounds. Two main processes for producing Active zinc oxide are direct and indirect methods. In the direct or American method, zinc ore is heated in air with coke or anthracite, and the resulting zinc vapors are subjected to the controlled oxidation. In the indirect or French process the zinc vapors to be oxidized are obtained by boiling zinc. Active Zinc oxide (ZnO) is water insoluble compound, but soluble in acid and bases. It has wide application in industry such as Rubber, Ceramics, Chemicals, Pharmaceuticals, Cosmetics & Personal Care, Agricultural, and Others. Active Zinc oxide is used primarily in cosmetics and personal care products including makeup, baby lotions, bath soaps, nail products, and powders and others. Rising demand for cosmetics and personal care products will add to the growth of Active zinc oxide market in forecast time. The global Active zinc oxide (ZnO) market size is projected to grow from USD 4.4 billion in 2019 to USD 5.7 billion by 2024, at a compound annual growth rate (CAGR) of 5.4%, during the forecast period. ZnO is a white inorganic compound that is used widely in pharmaceuticals, rubber, ceramics cosmetics, chemicals, and glass industries. The growth of these end-use industries is expected to fuel the global Active zinc oxide market demand over the forecast period. Active Zinc oxide is the most widely used zinc compound, and it plays an important role in a multitude of applications. The galvanization of steel products accounts for half of global zinc consumption due in large part to the metal's critically important corrosion-resistant properties. Active Zinc oxide is also a critical material in the manufacturing of tires, where it increases resilience and elasticity, literally putting the bounce in rubber. Increasing demand of Active Zinc oxide in chemical and manufacturing industry will further boost the market size. Industrial application of the product majorly vulcanization of rubber will surge significantly in forecast period. Tire industry is also one the major consumer of the product. Other major application including manufacturing of concrete, photovoltaic, electronic, optoelectronic devices and glass cutting. India exported Zinc-Oxide worth USD 2,344,417.64. Vietnam is one of the largest buyers of Zinc-Oxide from India, accounting for exports worth USD 666,311.42. The other big buyers of Zinc-Oxide are Spain and Qatar which buy Zinc-Oxide worth USD 486,487.22 and USD 179,654.28 respectively. Rising application of product in paints and coatings is projected to drive the Active zinc oxide market growth. One trend in the market is increasing use in semiconductor industry. The growing demand for Active zinc oxide in the production of varistors, ferrites, and solar cells is expected to propel the growth of the global Active zinc oxide market in the forecast period. The major driver in the market is growing demand for Nano Active zinc oxide. Nano Active zinc oxide is a specialized nanomaterial that is mainly available in the form of dispersions and powders. Companies operating in the Active zinc oxide market are also focusing on new product development and agreement to tap the opportunities in applications, such as solar energy, surface coatings, and pharmaceuticals. The Europe market is mature and developed stably in the past few years and will keep the trend in the next years. North America, led by the U.S. is expected to account for substantial growth in the market during the forecast period. Few Indian major players are as under Transpek-Silox Industry Pvt. Ltd. Rubamin Pvt. Ltd. Nav Bharat Metalic Oxide Inds. Pvt. Ltd. Chemspec Chemicals Pvt. Ltd.
Plant capacity: Active Zinc Oxide: 20 MT / DayPlant & machinery: Rs 285 lakhs
Working capital: -T.C.I: Cost of Project: Rs 830 lakhs
Return: 31.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Talc from Talc Ore (Cosmetic Grade)

Talc is a naturally-occurring mineral used in some consumer products, including personal care products like cosmetics. Pure talc and talc-containing rock are mined from the earth. Talc is made up of magnesium, silicon, oxygen and hydrogen. Its physical properties make it one of the softest naturally occurring minerals. There are different grades of talc, with varying degrees of purity (or presence of other minerals). Talc is milled to different particle sizes, with the finest talc used in cosmetics, pharmaceuticals, and some food products. Talc may be used in products to absorb moisture, prevent caking, improve consistency, or to make a product opaque. Talc is an ingredient used in personal care products such as loose powders (e.g., talcum powder, baby powder, blush, eye shadow), and in other forms (e.g., pressed powder, liquid makeup). It is also used in some food items, such as rice and chewing gum, and to manufacture pill tablets. Talc may also be used during athletic or other activities (e.g. drumming). Talc is an industrial mineral, which is composed of hydrated magnesium sheet-silicates with theoretical formula of Mg3Si4O10(OH)2 that belongs to the phyllo silicate family. Talc may have white, apple green, dark green or brown colors, depending on its composition. Talc is the softest one in all minerals, which has Mohs hardness ranges from (1–1.5) and a greasy feel. The specific gravity of talc is about 2.75; it is relatively inert, and water repellent. Talc is a kind of clay mineral substance comprising of hydrated magnesium silicate. It is in powder form and is found in the mixture with corn starch. Talc finds extensive application as the baby powder across the globe. The product finds lucrative applications in ceramics, cosmetic items, and paints & roofing materials. Talc Market was valued at USD 2.57 billion in 2017 and is projected to reach USD 3.35 billion by 2023, at a CAGR of 4.6% during the forecast period. Moreover, burgeoning demand for lightweight plastic components of vehicles made from talc reinforced polypropylene to enhance vehicle performance, fuel efficacy, and durability will impel the business scope. Beneficial features such as corrosive resistance and resistant against abrasiveness is anticipated to make talc more popular across the globe. Apart from this, the population explosion witnessed in the emerging economies along with rise in the per capita income of middle income group population in these economies has transformed into lucrative demand for consumer items like ceramics, pharmaceuticals, and ceramics. This will propel the product demand. In addition to this, the thriving manufacturing as well as service sectors will propel the market growth. Region wise, the talc market can be divided into five main regions: Europe, Latin America, North America, Asia Pacific, and the Middle East and Africa. Asia Pacific region is likely to contribute notably toward the overall talc industry with the thriving manufacturing and infrastructural sector. With humungous presence of mineral and chemical manufacturing firms in the region as a result of cost-effective production facilities, the market is anticipated to gain traction over the years to come. Country like China is the global leader in white talc production and is also a supplier of talc to other countries. Moreover, escalating growth witnessed in automotive and household sectors in the countries such as Italy, France, and the UK will boost the market trends in Europe. Furthermore, North America and Latin American regions have huge market growth potential and are likely to exhibit incredible surge over the forthcoming years. As a whole any entrepreneur can venture in this project without risk and earn profit.
Plant capacity: Cosmetic Grade Talc : 32 MT / DayPlant & machinery: Rs 143 lakhs
Working capital: -T.C.I: Cost of Project : Rs 954 lakhs
Return: 26.00%Break even: 62.00%
Add to Inquiry Add to Inquiry Basket

IV Fluids (BFS Technology)

Intravenous fluids are fluids which are intended to be administered to a patient intravenously, directly through the circulatory system. These fluids must be sterile to protect patients from injury, and there are a number of different types available for use. Many companies manufacture packaged intravenous fluids, as well as products which can be mixed with sterile water to prepare a solution for intravenous administration. Fluids are given when someone's body fluid volume falls. There are a number of things which can cause a drop in fluid volume. Vomiting and diarrhea are a classic example, which is why people are encouraged to drink fluids when they are sick, to keep their fluid volume stable. Another cause is blood loss, which causes problems both because people lose blood products, and because they experience a loss in fluid volume. Electrolyte levels in the blood can also become unstable as a result of rapid changes in fluid volume, in which case intravenous fluids can be used to restore the balance. The global Intravenous (IV) solutions market was valued at USD 6.9 billion in 2015 and is projected to grow at a CAGR of 7.8% over the forecast period. The emergence of this market is attributed to the fast growing geriatric population and prevalence of malnutrition in the elderly and pediatric population. Intravenous (IV) solutions are fluids which are intended to be administered to a patient directly into the venous circulation. These fluids are sterile fluids which protects patients at the time of serious dehydration. There are various type of IV solutions available for use in the market. Many companies manufactures packaged intravenous fluids or products or compounds which can be mixed with sterile water to prepare a solution for intravenous administration. The market for Intravenous (IV) Solution is expected to reach USD 11,511.2 million by 2022 and is expected to grow at a CAGR of 7.69% during the forecast period 2016-2022. The factors which drive the growth of the market are the rising prevalence of chronic diseases, rising acceptance of vitamin C intravenous treatment therapy to treat colorectal cancer. This is attributed to the factors such as Growing acceptance of vitamin C intravenous for Colorectal Cancer and increasing prevalence of the chronic diseases. Europe is the second largest market which is growing at a CAGR of 8.12% from 2016-2022. Asia-Pacific region is the fastest growing market for IV Solutions, which is expected to grow at a CAGR of 8.34% during the forecast period from 2016 to 2022. As a whole any entrepreneur can venture in this project without risk and earn profit.
Plant capacity: IV Fluids (500 ml Pack): 22,400 Packs / Day IV Fluids (250 ml Pack): 22,400 Packs / DayPlant & machinery: Rs 2505 lakhs
Working capital: -T.C.I: Cost of Project: Rs 4334 lakhs
Return: 27.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

Mining of Mineral Ore with Processing and Beneficiation for Production of Red Iron Oxide

Iron & steel is the driving force behind industrial development in any country. The vitality of the Iron & Steel Industry largely influences a country's economic status. The mining of iron ore, an essential raw material for Iron & Steel Industry, is arguably of prime importance among all mining activities undertaken by any country. With the total resources of over 33.276 billion tonnes of haematite (Fe2O3) and magnetite (Fe3O4), India is amongst the leading producers of iron ore in the world. The primary use of iron ore is in the production of iron. Most of the iron produced is then used to make steel. Steel is used to make automobiles, locomotives, and ships, beams used in buildings, furniture, paper clips, and tools, reinforcing rods for concrete, bicycles, and thousands of other items. It is the most-used metal by both tonnage and purpose. Steel is a processed form of pig iron with impurities such as silicon, phosphorus and sulfur removed and with a reduction in the carbon content. Globally, steel's versatility is unsurpassed. Wrought iron (low carbon) and cast iron (pig iron) also have important markets. One of the most ubiquitous products in Australia is corrugated iron, a structural sheet steel shaped into parallel furrows and ridges. Global iron ore production will modestly grow to 3,119 million tonne by 2028 from 2,850 million in 2019, Fitch Solutions Macro Research said in a report today. This represents an average annual growth of 0.5 per cent during 2019-2028, which is a significant slowdown from an average growth of 2.9 per cent during 2009-2018, it said. The supply growth would be primarily driven by India and Brazil where major miner Vale is set to expand output with its new mine. On the other hand, miners in China, which operate at the higher end of the iron ore cost curve will be forced to cut output due to fall in ore grades. India’s finished steel consumption grew at a CAGR of 5.69 per cent during FY08-FY18 to reach 90.68 MT. India’s crude steel and finished steel production increased to 106.56 MT and 131.57 MT in 2018-19, respectively. In FY20 (till November 2019), crude steel and finished steel production stood at 73.17 MT and 67.52 MT respectively. During 2018-19, 6.36 MT of steel was exported from India. Exports and imports of finished steel stood at 5.75 MT and 5.07 MT, respectively, in FY20P (up to November 2019). As a whole any entrepreneur can venture in this project without risk and earn profit. Government Initiatives Some of the other recent government initiatives in this sector are as follows: • Government introduced Steel Scrap Recycling Policy aimed to reduce • import. • An export duty of 30 per cent has been levied on iron ore^ (lumps and fines) to ensure supply to domestic steel industry. • Government of India’s focus on infrastructure and restarting road projects is aiding the boost in demand for steel. Also, further likely acceleration in rural economy and infrastructure is expected to lead to growth in demand for steel. • The Union Cabinet, Government of India has approved the National Steel Policy (NSP) 2017, as it seeks to create a globally competitive steel industry in India. NSP 2017 envisages 300 million tonnes (MT) steel-making capacity and 160 kgs per capita steel consumption by 2030-31. • The Ministry of Steel is facilitating setting up of an industry driven Steel Research and Technology Mission of India (SRTMI) in association with the public and private sector steel companies to spearhead research and development activities in the iron and steel industry at an initial corpus of Rs 200 crore (US$ 30 million). • The Government of India raised import duty on most steel items twice, each time by 2.5 per cent and imposed measures including anti-dumping and safeguard duties on iron and steel items. Huge scope for growth is offered by India’s comparatively low per capita steel consumption and the expected rise in consumption due to increased infrastructure construction and the thriving automobile and railways sectors. Few Indian major players are as under Mineral Enterprises Ltd. Mandovi Pellets Ltd Idcol Kalinga Iron Works Ltd. Essel Mining & Inds. Ltd. Brahmani River Pellet Ltd. Bonai Industrial Co. Ltd. Arya Iron & Steel Co. Pvt. Ltd Odisha Mining Corpn. Ltd. Obulapuram Mining Co. Pvt. Ltd.
Plant capacity: Iron Ore: 2,400 MT / DayPlant & machinery: Rs 527 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1798 lakhs
Return: 30.00%Break even: 61.00%
Add to Inquiry Add to Inquiry Basket

Spices (Turmeric, Chilli & Masala Powder)

Spices are non-leafy parts (e.g. bud, fruit, seed, bark, rhizome, bulb) of plants used as a flavoring or seasoning, although many can also be used as a herbal medicine. A closely related term, ‘herb’, is used to distinguish plant parts finding the same uses but derived from leafy or soft flowering parts. The two terms may be used for the same plants in which the fresh leaves are used as herbs, while other dried parts are used as spices, e.g. coriander, dill. There are a large number of various spices, used along with food such as pepper, chill, cardamom, cinnamon, mustard, cloves, ginger, turmeric, coriander etc. These spices give taste to the prepared food and at the same time give attractive colours and smell to the food. So the usage of some or all of these spices during cooking is now became an unavoidable one. The quantity of a particular spice added to the food during cooking is depends upon the taste of the user. For better and proper taste, the addition of these spices should be controlled. For that there is certain composition of spices for each type of dishes. For e.g if we are going to make the north Indian dish paneer butter masala. There is a particular composition of the spices and at the same time the composition of the spices added to sambar a south Indian dish is entirely different, even though the contents are same. India is the largest producer, consumer and exporter of spices and spice products in the world and produces more than 50 spices. India is also a big exporter of Chilli, turmeric, cumin, pepper and many other spices. The country also imports various spices to meet its local requirement of taste as Indian dishes are incomplete without adding varieties of spices to them. Andhra Pradesh is the largest spice producing state in India. Gujarat, Karnataka, Rajasthan, Tamilnadu, Assam, Kerala, Madhya Pradesh, Maharashtra, Orissa, Uttar Pradesh and West Bengal are the other major spices producing states in India. Chilli is the major spice crop occupying about 29 percent of area under cultivation and contributing about 34 percent of total spices production in the country. Turmeric accounts for 14% of production and 6% of area, while garlic accounts for 19% of production and 5% of area. Seed spices contribute 17% of production and occupy 41% of area while pepper contributes 2% of production and occupies 9% of area of the total spices in the country. Total spices export from India stood at 226,225 tonnes valued at US$ 621.78 in April-June 2016, registering a year-on-year growth of 3 per cent. Major importers of Indian spices in FY 2015-16 were US, China, Vietnam, UAE, Indonesia, Malaysia, UK, Sri Lanka, Saudi Arabia, and Germany. Worldwide, food trends are changing with a marked health orientation. Since organic foods are free from chemical contaminants, the demand for these products should steadily increase in the new millennium. Organic cultivation is nothing new to India. Government of India has announced a few schemes under which 100 per cent export-oriented units can be set up any, where in India. The subject of the scheme is to promote to export of manufacture goods. Under this scheme special concession and facilities are provided to entrepreneurs desirous of setting up 100 percent export units. As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players are as under Indian Products Pvt. Ltd. Indian Chillies Trdg. Co. Ltd. Gokul Agro Inds. Ltd. General Commodities Pvt. Ltd. Empire Spices & Foods Ltd. Eastern Condiments Pvt. Ltd. Cookme B B D Pvt. Ltd. Bhavani Tea & Produce Co. Ltd. Paras Spices Pvt. Ltd. Periyar Plantations Pvt. Ltd. Shubham Goldiee Masale Pvt. Ltd.
Plant capacity: Turmeric Powder: 2,000 Kgs. / Day Red Chilli Powder: 2,000 Kgs. / Day Sambhar Masala: 2,000 Kgs. / Day Biryani Masala: 2,000 Kgs. / Day Chicken Fry Masala: 2,000 Kgs. / Day Garam Masala : 2,000 Kgs. / DayPlant & machinery: Rs 138 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1138 lakhs
Return: 32.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Adult Diapers and Baby Diapers

A diaper or nappy is a kind of underwear that allows one to defecate or urinate in a discreet manner. When diapers become soiled, they require changing; this process is often performed by a second person such as a parent or caregiver. Diapers are primarily worn by children who are not yet potty trained or experience bedwetting. However, they can also be used by adults with incontinence or in certain circumstances where access to a toilet is unavailable. These can include the elderly, those with a physical or mental disability, and people working in extreme conditions such as astronauts. It is not uncommon for people to wear diapers under dry suits. The Baby Diaper Industry has revolutionized the FMCG industry. The diapers have the ability to contain the urine by converting it into gel. Thus, due to this property, the diapers are gaining huge consumption amongst the baby as well as adult population. Further, it is anticipated that the Baby Diaper market is expected to reach around INR 200 Billion by 2022, growing at a double digit CAGR over the forecasted period 2017-2022. Disposable diapers market would garner substantial market share of about 63% of the estimated global market by 2020. The changing environmental needs would limit the use of disposable diaper in the future, promoting the usage of bio-degradable diapers. The companies operating in this market are focusing on manufacturing cost effective and skin friendly diapers that will cater to the customers with pressing demands for quality and cost effectiveness. The current population growth rate shows that there is a demand for diapers and nappies in households, particularly considering the increase in the workforce prompting mothers to stock diapers, especially disposables, as they are easier and faster to handle. The various types of baby diapers available in the markets include cloth diapers, swim pants, training nappies, and a wide category of disposable diapers such as biodegradable, super-absorbent, and ultra-absorbent diapers. In India, the segment of disposable diapers accounts for more than 75% of the market share. The diaper industry in India has grown with a CAGR of more than 20% over the last five years from 2011-12 to 2016-17. The diaper market largely consists of baby diapers in India with more than 95% volume share whereas adult diapers have just started their foray into the mainstream market. Further, it is anticipated that the Diaper market is expected to reach around INR 200 Billion by 2022, growing at a double digit CAGR over the forecasted period 2017–2022. The adult diapers market in India started at a low development level, it has grown rapidly. The continuous construction of international hospital chains helped many diaper manufacturers to promote their brands across India. Today, 70% of adult diapers are sold through hospitals and their affiliated stores, which are welcomed by Indians. The majority of adult diapers are diapers, pads, and nursing pads. Indian senior centers a Real so starting to promote adult diapers. As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players are as under Mediklin Healthcare Ltd. Me N Moms Pvt. Ltd. Kimberly-Clark India Pvt. Ltd. Diapers India Ltd. Auctus Pharma Ltd Amkay Products Pvt. Ltd. Nobel Hygiene Pvt. Ltd. Pigeon India Pvt. Ltd.
Plant capacity: Baby Diapers (4 Pcs.): 18,000 Pkts. / Day Adult Diapers (4 Pcs.): 18,000 Pkts. / DayPlant & machinery: Rs 1632 lakhs
Working capital: -T.C.I: Cost of Project: Rs 2219 lakhs
Return: 27.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Hot Melt Glue Stick

Thermoplastic adhesives, also known as "hot melt" adhesives, applied hot and simply allowed to harden. These adhesives have become popular for crafts because of their ease of use and the wide range of common materials to which they can adhere. Hot melt adhesive is special kind of adhesives, which can be used at high temperature and adhesion properties remain unchanged on cooling. Hot melt adhesives basically formed by compounding of synthetic polymeric resin. Synthetic polymeric resins are used polyvinyl acetate, Polyethylene acetate, Urea formaldehyde etc. It is generally in the form of solid white powder or in the liquid form. For the manufacturing of hot melt adhesives, there is required of a jacketed metallic reaction kettle, heating system and packaging machine. Hot melt glue sticks consist of a high performance, hot melt adhesive supplied in sticks 300 mm long and approximately 11.5 mm in diameter. They are designed for application by appropriate glue guns and provide bonds with good flexibility and peel strengths, being particularly suitable for use with flexible substrates. The Adhesive Technologies business unit is a leading solution provider for adhesives, sealants and functional coatings for consumers, craftsmen and industrial applications. Henkel offers a multitude of applications to satisfy the needs of different target groups: consumers, craftsmen and industrial businesses. In 2019, the business unit generated sales of 9,461 million euros, 47 percent of total company sales. Hot Melt Adhesives Market size exceeded USD 6.60 billion, globally in 2018 and is estimated to grow at over 6.4% CAGR between 2019 and 2026. Automobile application segment held the highest share in 2018, and is expected to maintain its dominance throughout the forecast period. Hot melt adhesives are formulations based on thermoplastic polymers which can be softened and reshaped on heating above their melting point. These adhesives are applied on a material in liquid state and offer easy to clean application with minimum toxicity. They are served in a wide array of industries such as packaging owing to their high stability & strength, making them a suitable alternative to solvent-borne adhesives. Hot melt adhesives demand is attributed towards rising importance regarding disposable hygiene products and growing government initiatives to promote health & wellness among individuals. With increasing awareness for personal hygiene, consumers are looking for products with enhanced features such as better absorption and improved softness which has augmented the adoption of environment friendly disposable adhesives. The hot melt adhesives market offers an effective solution for carton closing, sealing and play a significant role in overcoming challenges such as energy efficiency and product safety. This has further enhanced its usage in food, beverage & other consumer goods packaging applications. As a whole any entrepreneur can venture in this project without risk and earn profit.
Plant capacity: Clear Transparant Glue Stick Size 200 mmx 7 mm (LxD):2,000 Kgs / Day Yellow Glue Stick Size 250 mmx 11 mm (LxD): 2,000 Kgs / Day Milky Glue Stick Size 100 mmx 7 mm (LxD): 2,000 Kgs / DayPlant & machinery: Rs 73 lakhs
Working capital: -T.C.I: Cost of Project: Rs 687 lakhs
Return: 27.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Beer & Wine

Beer is the world's oldest beverage, possibly dating back to the 6th millennium BC. It is also the most widely consumed alcoholic beverage and the third most popular drink overall after water and tea. Produced by the brewing and fermentation of starches, mainly derived from cereals — the most common of which being barley. Beer forms part of the culture of many nations, and has acquired various social traditions and associations. Beer is consumed in countries all over the world. Sales of beer are four times that of wine and in most societies, beer is the most popular alcoholic beverage. Today, the brewing industry is a global business, consisting of several dominant multinational companies and many thousands of smaller producers ranging from brewpubs to regional breweries. Among the alcoholic drinks, Beer is quite common and popular in almost every Country of the World. People of different Countries take beer in varying much like a soft drink in European Countries it is just a substitute of water. The alcoholic contents and main source stuff also keep varying according to the tests of the major part of population of the particular country although it is a fashion to ask for beer of every origin in every Country. Wine is fermented grape juice. Wine can be made from grapes, fruits, berries etc. Most wine, though, is made from grapes. And no matter what the wine is made from, there must be fermentation, that is, that sugar be transformed into alcohol. If the amount of alcohol is relatively low, the result is wine. If it is high, the result is "distilled liquor," like gin or vodka. Red wine result when the crushed grape skin pulp and seeds of purple or red varieties are allowed to remain with juice during fermentation periods. Pink/rose wine can be produced by removing the non-juice pumace from the must during fermentation. The Global Beer Market was valued at $593,024 million in 2017, and is projected to reach $685,354 million by 2025, growing at a CAGR of 1.8% from 2019 to 2025. The origin of beer dates to the early Neolithic period, and is one of the oldest and the most consumed alcoholic beverages in the world. The annual growth in the Indian beer market has been around 8% in the recent years, which compares well with the growth in China. But the Chinese market of 20 mn kl is over 25 times more than the Indian market of over 900,000 kilolitres. The Beer market in India will grow at a CAGR of 16.94 percent and 14.57 percent on the basis of revenue and volume. The growing popularity of wine in India is generating lots of interest among big and small wine producers. This is also reinforced by the fact that the cost for opening and setting up of wine plants with capacity of around 100,000 lts comes only to somewhere between Rs. 10-15 mn mark. As a result many entrepreneurs, Indian and foreign, are entering in this sector. The market for super-premium vodka category in India, priced upwards of Rs. 2,500 per qt, is estimated at about 7,000 cases annually, and is growing at about 30%. Wine makes up only a fraction of the overall alcoholic drinks market, but is growing nearly three times as fast as whisky or rum, the traditional favourites. India's top three wine makers have more than two-thirds of the market of more than 5 mn bottles, valued at Rs. 2.4 bn or USD 60 mn. The segment is seeing bigger demand even for pricey sparkling wine. One estimate has put India's total wine market at around 0.9 mn cases. Of this, imported wine constitutes 1,50,000 cases. In a global perspective, this is really miniscule. The wine market in the US is estimated at 250 mn cases and in France around 320 mn cases. On this account itself, this obviously translates into a huge opportunity. Indian red wines, it's more of increasing popularity of white, sparkling, rose and other wines into the Indian market. The Indian consumers have stared exploring other variants of wines from just red wines. The consumption of Wine in India is found to be increasing with rise of awareness of wine as a good drink for health. The wine market of India observed growth with a CAGR of more than 25% in past five years. The global wine market was valued at US$ 296.03 billion in 2016 and is slated to reach US$ 404.64 billion by 2025. The market is expected to exhibit a CAGR of 3.23% during the forecast period (2017-2025). Asia Pacific is projected to witness the fastest growth in the wine market with countries such as China, India being the key contributors in the region. At a global level, China stands to be the largest market for alcohol consumption with the country also being one of the leading importers of wine worldwide. The ongoing recovery of the Chinese economy, growing upper middle class population and the rising disposable income is further expected to boost the consumption of wine in the country. As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players are as under United Breweries Ltd. Som Distilleries & Breweries Ltd. Premier Breweries Ltd Parag Breweries Ltd. Mount Everest Breweries Ltd. Lilasons Breweries Ltd. Kalyani Breweries Ltd. Hindustan Breweries & Bottling Ltd. Him Neel Breweries Ltd
Plant capacity: Beer (650 ml size Bottle): 30,077 Bottles / Day Wine (750 ml size Bottle): 445 Bottles / DayPlant & machinery: Rs 2086 lakhs
Working capital: -T.C.I: Cost of Project : Rs 3913 lakhs
Return: 30.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Dairy Farming & Dairy Products (Milk, Butter, Ghee & Paneer)

Dairy farming has been part of agriculture for thousands of years, but historically, it was usually done on a small scale on mixed farms. Specialist scale dairy farming is only viable where either a large amount of milk is required for production of more durable dairy products such as cheese, or there is a substantial market of people with cash to buy milk, but no cows of their own. Centralized dairy farming as we understand it primarily developed around villages and cities, where residents were unable to have cows of their own due to lack of grazing land. Near the town, farmers could make some extra money on the side by having additional animals and selling the milk in town. Dairy farming is a class of agriculture for long-term production of milk, which is processed for eventual sale of a dairy product. Dairying is an important source of subsidiary income to small/marginal farmers and agricultural laborers. India derives nearly 33% of the gross Domestic population from agriculture and has 66% of economically active population, engaged in agriculture. The share of livestock product is estimated at 21% of total agriculture sector. Milk production alone involves more than 70 million producers, each raising one or two cows/buffaloes primarily for milk production. In addition to milk, the manure from animals provides a good source of organic matter for improving soil fertility and crop yields. The gobar gas from the dung is used as fuel for domestic purposes as also for running engines for drawing water from well.In Hinduism; cow urine has a special significance as a drink. Sprinkling of cow urine is said to have a spiritual cleansing effect as well. Gomutra is not a toxic waste material. 95% of it is water, 2.5% consists of urea, and the remaining 2.5% is a mixture of minerals, salts, hormones and enzymes. As of 2018, India is the leading milk producing country in the world, accounting for ~19% of the global market share. The milk processing industry in India is expected to expand at a compound annual growth rate (CAGR) of ~14.8% between FY 2018 and FY 2023, and will reach INR 2,458.7 Bn in FY 2023. Being one of the primary dairy consumables in India, the increase demand for milk in the country is owed to the increasing population. As of FY 2018, ~81.1% of the Indian dairy and milk processing market was part of the unorganized sector, which produces milk in unhygienic environments. This reduces the overall quality and nutrition levels of the milk produced. India has the highest livestock population in the world with 50% of the buffaloes and 20% of the world’s cattle population, most of which are milch cows and milch buffaloes. India’s dairy industry is considered as one of the most successful development programs in the post-Independence period. India is the world’s largest milk producer, accounting for more than 13% of world’s total milk production. As it is the world’s largest consumer of dairy products, but consuming almost 100% of its own milk production. Dairy products are a major source of cheap and nutritious food to millions of people in India and the only acceptable source of animal protein for large vegetarian segment of Indian population, particularly among the landless, small and marginal farmers and women. In India, about three-fourth of the population live in rural areas and about 38% of them are poor. A specific Indian phenomenon is the unorganized sector of milkmen, vendors who collect the milk from local producers and sell the milk in both, urban and rural areas, which handles around 65-70% of the national milk production. However, it opens a new gate for the dairy farmer to directly reach to the consumer or to shorten the distance between the consumer and producer, leading to higher rates for the product milk. While, in the organized dairy industry, the cooperative milk processors have a 60% market share. The cooperative dairies process 90% of the collected milk as liquid milk whereas the private dairies process and sell only 20% of the milk collected as liquid milk and 80% for other dairy products with a focus on value-added products. In the present situation of world market, the milk and dairy market landscape is a dynamic entity within the food industry new opportunities in emerging markets, increasing globalization, changes in consumer demand, nutritional policy and the regulatory environment are among top issues facing the industry. This will lead to increase of India`s share in the world milk production from the current 16 per cent to 21 per cent in 2020. The core of the dairy industry lies with the milk producing farmer, who gets affected by many factors ranging from fuel and agricultural input prices to government`s foreign policy. The global dairy products market is expected to grow at a CAGR of 5.2% from 2019 to reach $645.8 billion by 2025. Dairy is defined as a business enterprise that deals with the processing and harvesting of animal milk for human consumption. Some of the common milch animals include cow, goat, buffalo, camel and sheep. The milk obtained from these animals can be consumed directly and processed into ice cream, cheese, paneer, butter, ghee, condensed milk and yogurt. These products offer various nutrients such as calcium, proteins, zinc, magnesium, and vitamin D and B12. With widespread demand for dairy products and their proactive function in the global food industry, dairy plays a crucial role in the growth of the economies worldwide. Over the years, the dairy industry has witnessed improvements in product safety through specialization, modernization and consolidation. Moreover, advancements in global trade have also influenced the profitability of dairy farms. As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players are as under Amrut Industries Ltd. Creamline Dairy Products Ltd. India Dairy Products Ltd K M G Milk Food Ltd Milk Mantra Dairy Pvt. Ltd. Sri Vyshnavi Dairy Pvt. Ltd. Taj Milk Foods Pvt. Ltd. Tirumala Milk Products Pvt. Ltd. Vaishno Devi Dairy Products Ltd.
Plant capacity: Milk: 5,000 Ltrs / Day Butter: 120 Kgs / Day Ghee: 100 Kgs / Day Paneer: 220 Kgs / Day Cow Urine: 6,500 Ltrs / Day Kande: 2,900 Pkts / DayPlant & machinery: Rs 276 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1768 lakhs
Return: 27.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 177 of 262 | Total 2620 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 177 261 262   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top