REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Manipur - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Manipur is a state in north Eastern India, with the city of Imphal as its capital. Manipur has been at the crossroads of Asian economic and cultural exchange for more than 2500 years. It has long connected Indian subcontinent to Southeast Asia, enabling migration of people, cultures and religions. Manipur is primarily an agrarian economy, with significant hydroelectric power generation potential.

The natural vegetation occupies an area of about 14,365 km² which is nearly 64% of the total geographical area of the state. The vegetation consists of a large variety of plants ranging from short and tall grasses, reeds and bamboos to trees of various species. Broadly, there are four types of forests - Tropical Semi-evergreen, Dry Temperate Forest, Sub-Tropical Pine and Tropical Moist Deciduous.


DEMOGRAPHIC PROFILE

Manipur has population of 25.7 Lakhs, an increase from figure of 22.94 Lakh. Total population of Manipur as per 2011 census is 2,570,390 of which male and female are 1,290,171 and 1,280,219 respectively.

Total area of Manipur is 22,327 sq. km. Density of Manipur is 115 per sq km which is lower than national average 382 per sq km. In 2001, density of Manipur was 103 per sq km.

Of the total population of Manipur state, around 67.55 percent live in the villages of rural areas. In actual numbers, males and females were 878,469 and 857,767 respectively. Total population of rural areas of Manipur state was 1,736,236. In rural areas of Manipur, literacy rate for males and female stood at 83.39 % and 67.03 %. Average literacy rate in Manipur for rural areas was 76.20 percent. Total literates in rural areas were 1,142,564.

TOURISM

Least touched and least discovered Manipur promises to be the great tourist discovery of the21st century. An oval shaped valley surrounded by blue green hills, rich in art and tradition has inspired description such as the Switzerland of the East with its cascading rapids, tripling rivers, varieties of flowers, exotic blooms and lakes. The people of Manipur include Meitei, Nagas, Kuki-Chin-Mizo and Gorkhas groups and Muslims and other colorful communities which have lived in complete harmony for centuries.

The Ministry of Tourism has five Regional offices located at Kolkata (East), Mumbai (West), Delhi (North), Chennai (South) and Guwahati (North East), which are headed by an officer of the level of Deputy Director General designated as Regional Director.

Domestic tourists intending to visit Manipur by road via Dimapur/Kohima require Inner Line Permits to pass through Nagaland. These are issued by the Liaison officers of the Government of Nagaland at New Delhi, Calcutta, Guwahati, Shillong and the Sub-divisional officer (Civil), Dimapur, deputy Commissioner, Imphal can also issue permits to tourists traveling by road from imphal to Kohima and Dimapur in Nagaland.

INDUSTRY SECTOR

The Information Technology and IT Enabled Services sector in India is looking towards Tier-II and Tier-III cities to meet the growing demands of the industry for sourcing its required skilled manpower. The youth of Manipur have not only excelled in the field of Sports, but have already established a noticeable presence in the ITES industry in India.

Manipur State is striving to score higher on being business-friendly in terms of the available IT infrastructure. These include:

•        Software Technology Parks of India (STPI) unit of Imphal with Earth station and OFC connectivity.

•        Up gradation of IT infrastructure at Imphal to provide modern Business-ready built-up office space for IT/ITES firms.

•        Internet on the move – Various Telcos like BSNL, Tata Indicom, Airtel etc. are providing Wireless Internet across the State.

A high rate of unemployment exists in Manipur, particularly among the educated youth. According to the Live Register of Employment Exchange, the total number of educated job-seekers were recorded as 5, 83.65 thousands.

Manipur is rich in natural resources but due to difficult terrain, inadequate infrastructural facilities and varying climatic conditions, the state could not develop much in the industrial sector of its economy. In the initial stage, Govt. policy in the state was one of revival and revitalization of the traditional handlooms and handicrafts of the local habitats. The contribution of the manufacturing sector to the total gross state domestic product at current prices is found to be 6.17 percent. The trend of industrial development and the present local conditions of the state and in consonance with industrial policy of the Government of India, the Govt. of Manipur in its policy announcement of 1990, has decided to focus attention to the small scale and agro-based industries without discouraging the medium and large-scale industries. It is expected to serve the objective of employment generation and dispersal of industries in rural and urban areas. The state has laid emphasis on creating a strong industrial base and employment opportunities in the state through provision of various growth inducing factors based on locally available resources. It is based on locally available raw materials and minerals. In order to promote rapid industrialization, the State Government has over the years been offering attractive package of incentives and concessions to invigorative industries.

The khadi and Village Industries Commission (KVIC) was established by the Govt. of India in the year 1957. The Khadi and Village Industries is not only providing employment to people in rural and semi-urban areas at low investment per job, but also utilizes local skill resources and provides part-time as well as full time work to rural artisans, women and minorities.

The traditional sector of industries falls within the purview of organizations such as Khadi and Village Industries Commission. The KVIC include artisans in tiny industrial units and defines it as any industry located in a village or town inhabited by population not exceeding 10000 which produces goods and renders services with or without the use of power in which the fixed capital per head does not exceed Rs.15000.

Growth Centres are large villages or small towns which have the potential to become the nuclei for the socio-economic development of the surrounding area. The Growth Centres can be identified by the different orders with respect to the quality and quantity of services and facilities, service area and population. A growth centre of lowest order should have services such as agricultural input centre, primary and middle school, maternity and child care centres and daily market.

Small-Scale Industries (SSI) is an important segment of the economy, contributing substantially in the form of production, employment and exports. It has continued to play a vital role in the fulfillment of socio-economic objectives. The principal factor for defining small-scale Industries has always been based on the size of investment. Small-Scale Industries are those industries whose investment in fixed assets such as plants and machineries does not exceed Rs.100.00 lakhs (Rs.1 Crore). Investment in plant and machinery in respect of industry related Small-Scale Service and Business Enterprises (SSSBE) were increased to Rs.10.00 lakhs from Rs.5.00 lakhs. For speedy growth of small-scale industries, the Government has already brought about simplifications in the SSI registration procedures.

The State Government has introduced this Policy with various components being offered such as, incentives, improved infrastructure facilities, supply of quality power, and credit flow from Bank and Financial institutions, better market linkages and to boost investor confidence.

The Government of Manipur desire Manipur to be a preferred destination for industrial and trade activities and achieving to the aspiration of the people of Manipur, thereby affording to –

•        All round economic development and to improve living standards.

•        To create employment opportunities, skill development and self

•        Employment opportunities.

•        Optimal utilization of both natural and physical resources.

OBJECTIVE OF INDUSTRIAL POLICY

•        Develop adequate infrastructures to ensure planned and accelerated industrial development.

•        Promote maximum capital investment in the State for economic activities resulting in employment opportunities, improving standard of living of people at large and all-round development of the State.

•        Promote modernization and technology up-gradation of existing industrial units.

•        Encourage quality control, standardization and competitiveness of local products.

•        Promote eco-friendly industries.


INDUSTRIAL ACTIVITIES IDENTIFIED AS THRUST AREAS

•             Agro based industry 

•             Bio-Technology industries.

•             Floriculture. 

•             Handloom and Handicraft.

•             Medicinal Plants.

•             Distillation of oils from aromatic plants.

•             Mineral based industries.

•             Information Technology Trade and Commerce under Export Import mechanisms.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 102 of 253 | Total 2529 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 102 252 253   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Hawai Chappal (Footwear)

Hawai chappals are lightweight footwear used by gents, ladies, and children and are used probably by every person in the society of all ages. Nowadays with the advancement of technology slippers are being manufactured in lot many variations including fancy chappals. Global Footwear Market is expected to garner $371.8 billion by 2020, registering a CAGR of 5.5% during the forecast period 2015 - 2020. Footwear industry is growing at a steady pace since the past few years. Analysis of the report includes various types of footwear including athletic and non-athletic shoes used by individuals of all age groups and gender. The rising demand for fancy, trendy yet comfortable footwear among all age groups is a key factor driving the global footwear industry. The global footwear market is segmented by type of footwear, end users of footwear, various platforms for sale of footwear, material used, and their sales across various geographies. Based on footwear type, the global footwear market can be classified as athletic footwear and non-athletic footwear. Athletic footwear includes aerobics shoes, running shoes, sports (cross training), walking shoes, soccer shoes, tennis shoes, cricket footwear, seasonal boots and others. Non-athletic footwear includes boots, casual, formal and rugged, and waterproof footwear. The global footwear market is rising expeditiously as footwear is increasingly becoming a fashion accessory. Not only this, the increasing demand for trendy, yet comfortable footwear among all age groups a key factor driving the global footwear market. With increasing participation in sporting activities and changing lifestyle, there is a massive demand for athletic shoes among non-sportspersons as well. Manufacturers are continuously focused on expanding their product portfolio in order to gain competitive advantage in this market.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Foam & Its Products (Mattresses, Cushions, Pillow Sheets)

Mattresses Mattresses are usually placed on top of a bed base which may be solid, as in the case of a platform bed, or elastic, such as an upholstered wood and wire box spring or a slatted foundation. Popular in Europe, a divan incorporates both mattress and foundation in a single upholstered, footed unit. Divans have at least one innerspring layer as well as cushioning materials. They may be supplied with a secondary mattress and/or a removable "topper." Mattresses may also be filled with air or water, or a variety of natural fibers, such as in futons. Kapok is a common mattress material in Southeast Asia, and coir in South Asia. The global mattress market was valued at $31,181.5 million in 2017 and is predicted to register a CAGR of 3.8%, during 2018–2023. Rise in purchasing power parity and growing global population are the major drivers for the mattress market. Increasing number of hotels and rooms are expected to drive the growth of mattress. According to World Tourism Organization (UNTWO), international tourism grew by 7% in 2017 and is expected to grow at a rate of 4-5% in 2018. Moreover, increasing tourism is expected to drive the growth of hotels worldwide, which would further support market growth. Based on end use, the mattress market has been classified into commercial users and residential users, out of which, commercial segment accounted for over 50% of revenue share in the global market in 2017. In the commercial segment, hotels are the main end users of mattresses as they change the mattresses more frequently than the residential users. On an average, a residential user changes their mattresses in 9-10 years, while the hotels change mattresses in around 5-6 years. Mattress market is fragmented with regional players having greater dominance in their respective regions. Global players such as Tempur Sealy International Inc, Serta Inc, Sleep Number Corporation, are set to enhance their footprint by expanding the manufacturing facilities, franchises and joint ventures in order to compete with regional players. Cushions A cushion is a soft furry bag of some ornamental material, stuffed with wool, hair, feathers, polyester staple fiber, non-woven material, or even paper torn into fragments. It may be used for sitting or kneeling upon, or to soften the hardness or angularity of a chair or couch. Decorative cushions often have a patterned cover material, and are used as decoration for furniture. The top countries contributing to Outdoor Cushions Industry market include the United States, European countries, Japan, China, India, Korea, Africa, and others. Custom country level and regional level information can be analyzed based on user’s interest.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Submersible Pump & Motor

A submersible pump (or sub pump, electric submersible pump (ESP)) is a device which has a hermetically sealed motor close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. The main advantage of this type of pump is that it prevents pump cavitation, a problem associated with a high elevation difference between pump and the fluid surface. Submersible pumps push fluid to the surface as opposed to jet pumps having to pull fluids. Submersibles are more efficient than jet pumps. A submersible pump pushes water to the surface by converting rotary energy into kinetic energy into pressure energy. This is done by the water being pulled into the pump: first in the intake, where the rotation of the impeller pushes the water through the diffuser. Submersible pump is a mechanical device used for transferring various types of fluid in different end use industries and is highly preferred for agricultural and industrial applications. Submersible pump is vertically submerged under the fluid to be transported (such as water etc.) and is driven by electric current, operating on the principle of centrifugal force. Various kinds of submersible pumps are available in the market, serving different purposes. The Global submersible pump market is anticipated to reach USD 12.5 billion in 2023 witnessing a CAGR of 5.5% over the forecast period 2015-2023. Asia-Pacific accounted for the highest percentage share of 42% to the global market in 2014, however the market is estimated to reach USD 2.8 billion by 2016 This can be attributed to various factors such as growing urbanization, rapid growth in industrialization, increasing population and emerging economy of developing nations such as India, China and Japan.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

HDPE Film Sheet

High Density Polyethylene (HDPE) is the high density version of PE plastic and is harder and denser than the LDPE, but is less ductile, and lighter than water. HDPE is well suited for applications where a greater tensile and compression strength is needed. HDPE films and sheets segment is also anticipated to observe lucrative growth rate by 2025. Unique properties of HDPE sheet include abrasion resistance, good electrical properties, low friction coefficient, chemical & corrosion resistance, moisture & odor resistance, and high impact strength. HDPE is widely utilized in food packaging industry and is FDA approved; borated HDPE is used on nuclear facility applications as it offers strong radiation protection. The global plastic films & sheets market is expected to reach USD 157.5 billion by 2025, according to a new report by Grand View Research, Inc. Rise in the global consumption of sustainable textiles has been a major factor driving market growth. Growing demand from application industries and rising prominence of eco-friendly and water soluble films have increased the utilization of plastic films and sheets in the global market.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Coated Paper & Board (Art & Chromo)

Coated Paper Coated paper is paper which has been coated by a mixture of materials or a polymer to impart certain qualities to the paper, including weight, surface gloss, smoothness or reduced ink absorbency. Various materials, including Kaolinite, calcium carbonate, Bentonite, and talc can be used to coat paper for high quality printing used in packaging industry and in magazines. The Coated Paper Market is projected to reach USD 7.18 Billion by 2021, at a CAGR of 3.2% from 2016 to 2021. In this study, 2015 has been considered as the base year, and the forecast period is from 2016 to 2021 to estimate the coated paper market. The growing demand for coated paper in Asia-Pacific, Europe, and North America coupled with its increasing demand for packaging and printing applications is expected to drive the coated paper market. Global coated paper market is expected to witness considerable growth owing to rapidly increasing demand from advertising and packaging industries. Coated paper offers gloss and matte texture finishes leading to rising applications in advertising materials, security papers, newspaper inserts, converted paper products, catalogue and magazines among others. Coated Board Coated Board is a coated, thick paper-based material. Coated Board is a paper with a basis weight (grammage) above 224 g/m2, but that is not absolute. Coated Board can be single (SBS) or multi-ply. Coated Board can be cut and formed, is lightweight, and as it is strong, is used in Packaging. Another end-use would be graphic printing, such as book and magazine covers or postcards.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Vermiculture Production with Training Centre

Vermiculture (from Latin word vermis, meaning worm) is the intentional rearing of earthworms to produce more earthworms. It involves the mass production of certain species of this annelid worm by providing them appropriate food and optimum conditions for their growth and reproduction. Vermiculture and vermicomposting are therefore inseparable. Vermiculture requires the use of organic materials as feed of the earthworms. To accelerate the production of earthworms, it is necessary to understand not only the breeding and growth requirements of the organism but also the process of producing compost. Conversely, the process of vermicomposting requires also an understanding of earthworms, particularly those which are efficient decomposers. In either system, both earthworms and vermicomposts are produced. Applications of Vermiculture – Earthworms can be sold to the following markets: Bait and tackle shops Large-scale vermicomposting facilities Worm growers just entering the business Institutions and businesses that do on-site vermicomposting of their food scraps and other organic materials (includes prisons, hospitals, schools, colleges and universities, restaurants, grocery stores, office buildings, etc.) Farmers desiring to vermicompost animal manure (including livestock and poultry farms, rabbitries and horse stables) Composters, organic gardeners or fisherpeople wanting to raise worms for their own use Growers with orders too large to fill from their own stocks Private laboratories, universities, and high schools for research and classroom needs Businesses that need worms as food for animals: Fish hatcheries Tropical fish stores Pet stores Zoos (w/ exotic fish and birds) Gamebird breeders Frog farmers Poultry growers Industries with organic wastes suitable as feedstock for worms: Composting facilities Papermills Breweries Cardboard manufacturers Land reclamation sites Generators of sludge/biosolids Food processors Canneries Wineries Cotton mills
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Home Furnishing (Export Quality)

The term “Home Furnishings” is a broad label that can include a number of things. As the name suggests, it includes anything that is used to furnish a home. This category includes furniture items, and some people try to use these words interchangeably. While there are many items that fall into both categories, home furnishings are the broader of the two categories. For example, a sectional sofa easily can be classified as a piece of furniture and as a home furnishing. Household furnishings are personal property and include, among others, such items as furniture, appliances, rugs, cooking utensils, and art objects. Typically not included within the definition of household furnishings are items classified as improvements, such as wall-to-wall carpeting, built-in ovens, ranges, and dishwashers. The India home furnishing market derives its demand from textile industry. With the increasing textile industry the market for home improvement has a rich history behind it. Home Decor Market is expected to garner $664.0 billion by 2020, registering a CAGR of 4.2% during the forecast period 2015-2020. Furnishings, textiles and floor covering products are key components of home decor. Expansion and developments in real estate industry, have supplemented the growth of world home decor market. Globalization facilitates easier and wider availability of home decor products and designs for consumers. Moreover, growing consumer preference towards adoption and usage of eco-friendly products, known for their minimal impact on the environment, has also boosted the growth of the market. With the increasing textile industry in the country, the furnishing market will continue to flourish. The home furnishing market is anticipated to witness demand from retail industry. By 2018, home furnishing market in India is expected to grow at CAGR of 8%by value to reach USD5.29 Billion. During the same period, curtains &, upholstery and rugs & carpets will grow at CAGR of 8% and 9.4 %. Home furnishings segment, on the other hand, contributes the lowest share of 26 per cent. The segment is further broken into sub-segments of bed linen, towels and robes, kitchen linen, curtains, upholstery, blankets, rugs and carpets. Among these sub-segments bed linen has the largest share close to half of total market. But the faster growing sub-segments are curtains, upholstery, blankets, rugs and carpets.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Glycerin Bath Soap (Pears Type)

Soaps vary a great deal in terms of their ingredients. For example, while some soaps make your skin dry, other soaps are very moisturizing. Glycerin soaps are considered to be one of the most moisturizing types of soap. The unique quality of this type of soap allows it to be both moisturizing and effective for all different kinds of skin. The benefits of glycerin soap help skin become healthy and moisturized. Glycerin is thought to be humectants, which means that it can attract moisture. Due to this quality, glycerin soaps attract moisture to skin and keep it locked in. This provides skin constant hydration. Unlike some soaps that dry skin out and make it feel tight and even flaky, glycerin soap keeps your skin feeling more hydrated for several hours after you use it. The market for soaps in India will grow at a CAGR of 5.5% during the period of FY 2016 to FY 2022. Soap is a product that has the highest market penetration in India, covering more than 80% of the country’s urban as well as rural households. During FY 2016, beauty soap segment had the largest share with 50%, followed by health soap segment with 28.6%. UAE, Nepal and USA are the top three countries that imported Indian soaps.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Auto Control Cables

Automotive control cables are the most imperative parts of the automotive industry. These cables are used for control of mechanical movements in variety of machines/ systems including aero-space and vehicles. But maximum quantity is consumed by two wheeler segment in automobile sector. The different types of automotive control cables are used in the wires of the brakes, clutch, accelerator, audio system, engine and so on. Stainless steel wires are twisted in the twisting machine and cut and made into the required length. One end of the automotive control cable is butted and dipped in molten zinc to avoid opening up of the ends and at the other end of the cable is fitted with a zinc stopper of required size or design and is fixed by a process known as die- casting. Automotive control cables enable the driver to control the various vehicle functions from his seat. Global automotive market has grown rapidly in last few decades that have led to the rise in demand of replaceable spares and essential parts. Automotive control cables are one of the essential parts of the vehicle without which the operations of vehicle is difficult. These cables enable driver to control the various vehicle functions and have wide global market. As control cable is a vital part of the vehicle, improvements in physical and chemical properties are continuously going on to improve performance, reliability and durability. Automotive control cables are made by twisting a number of stainless steel wires, of standard wire gauge with different diameter. The number of stainless steel wires, product type of cable and its size used in automotive control cables differs according to the vehicle type and its application. Control cable market size is forecast to experience substantial growth prospects from 2016 to 2023. Surging significance in numerous industry sectors such as automation and process control systems is likely to propel demand. U.S. control cable market share is anticipated to record considerable growth rates over the forecast period. Global control cable market is estimated to reach US$19.502 billion by 2023, increasing from US$13.120 billion in 2018, growing at a CAGR of 8.25% over the forecast period.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

PVC Extrusion Profile (Wiring Channel)

Profile extrusion is extrusion of a shaped product that can be a variety of configurations but does not include sheet or film products. Profile extrusion can include solid forms as well as hollow forms. Products ranging from tubing to window frames to vehicle door seals are manufactured this way and considered profile extrusion. Extrusions have several advantages over other forms of plastics manufacturing. An example is the ability to create plastic forms of infinite length, in very large (or small) production volumes. Many different plastic products can be made in this manner out of a full spectrum of plastic materials, including PVC, Acrylic, ABS, and Polystyrene, just to name a few. The extruded plastics market is projected to grow from USD 184.34 billion in 2016 to USD 291.74 billion by 2026, at a CAGR of 4.7% from 2016 to 2026. Key factors that are expected to drive the growth of the market include low feedstock and energy prices that tend to reduce the overall cost of extrudates. Adoption of extruded plastics in medical and agricultural industries is also expected to fuel the growth of this market. Extruded plastics are widely used in electrical & electronics in appliances, electrical components and accessories, and consumer electronic goods, among others. Major application of extruded plastics in this industry is in insulation and packaging of products such as wires & cables, switches, casing of electrical & electronic goods, and protective packaging of goods, among others. Plastic extrusion is used for the manufacturing of plastic products, such as weather-striping lines, pipes, tubes, deck railings, plastic films, window frames, plastic sheets, wire insulations and thermoplastic coatings. The prominent advantage of the plastic extrusion process is that the plastic can be given any complex shape and molded into any design without the appearance of any cracks or imperfections as the plastic encounters only shear and compressive stresses.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 102 of 253 | Total 2529 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 102 252 253   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top