Google Search

Search

Already a Member ?

Best Business Opportunities in Maharashtra- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Automotive Sector: Project Opportunities in Maharashtra

 

PROFILE:

The automotive industry in India is one of the largest in the world and one of the fastest growing globally. A sound transportation system plays a pivotal role in a country’s rapid economic and industrial development. The well-developed Indian automotive industry ably fulfils this catalytic role by producing a wide variety of vehicles. The automobile industry comprises automobile and auto component sectors. It includes passenger cars; light, medium and heavy commercial vehicles; multi-utility vehicles such as jeeps, scooters, motorcycles, three-wheelers and tractors; and auto components like engine parts, drive and transmission parts, suspension and braking parts, and electrical, body and chassis part. The automotive industry designs, develops, manufactures, markets, and sells motor vehicles, and is one of the world's most important economic sectors by revenue. Indian automotive sector is a key contributor to the economic growth. India is World’s second largest two wheeler market, Asia’s third largest passenger vehicle market and World’s fourth largest commercial vehicle and tractor market. Maharashtra has strongly emerged as the top destination in India for automobile sector with a strong presence across the value chain.

 

RESOURCES:

Maharashtra accounts for approximately 33% of the country’s output of automobiles by value. Major automobile clusters in the state are Pune, Nasik, Aurangabad and Nagpur. Maharashtra is the leading producer of heavy and commercial vehicles in the country. Auto and auto ancillaries contribute to 9% of Maharashtra’s manufacturing strength. Maharashtra has a strong skilled labour base supporting the automotive industry. The state offers a strong educational infrastructure with technical institutions providing automobile engineering courses across the state. India's premier automotive R&D, testing and certification organisation, Automotive Research Association of India (ARAI) is present in Pune. India’s first Auto Cluster Development and Research Institute are in the state.

 

GOVERNMENT POLICIES:

Policy aims to promote integrated, phased, enduring and self-sustained growth of the Indian automotive industry. Special policies for Auto industry make it a lucrative investment sector.

·        Exalt the sector as a lever of industrial growth and employment and to achieve a high degree of value addition in the country; Promote a globally competitive automotive industry and emerge as a global source for auto components

·        Establish an international hub for manufacturing small, affordable passenger cars and a key centre for manufacturing Tractors and Two-wheelers in the world. Ensure a balanced transition to open trade at a minimal risk to the Indian economy and local industry

·        Conduce incessant modernization of the industry and facilitate indigenous design, research and development

·        Assist development of vehicles propelled by alternate energy sources;

·        Automatic approval for foreign equity investment of up to 100 per cent for manufacturing of auto components.

·        Setting up of a technology modernization fund, with special emphasis on SMEs and encouragement to establish development centres for SMEs.

·        Increasing exports and related infrastructure and streamlining training/research institutions around auto hubs.

·        Setting up of automotive training institutes and auto design centres, special auto parks and auto component virtual SEZs

·        To enhance and upgrade the testing and validation infrastructure and establish centres of excellence for automotive R&D.

·        Lowering of excise duty on small cars, increasing budgetary allocation for R&D activities and lowering duty regime in general.

·        Weighted increase in the in-house R&D expenditure from 150% to 200% and from 120% to 175% on outsourced R&D expenditure.

Chemical Sector: Project Opportunities in Maharashtra

 

PROFILE:

Chemical industry is one of the oldest industries in India. It not only plays a crucial role in meeting the daily needs of the common man, but also contributes significantly towards industrial and economic growth of the nation. The industry, including petro-chemicals, and alcohol-based chemicals, has grown at a pace outperforming the overall growth of the industry. India’s chemical industry contributes close to 3% to country’s GDP (2009). India is expected to grow at more than 11% till 2011 at almost double growth rate of the global industry. The chemical industry accounts for about 17.6% of the output of the manufacturing sector and around 11% in total exports of the country. The industry registered a growth of 16% from FY 2005 to 2010 In terms of volume, India is 12th largest in the world and 2nd largest in the developing world after China, Maharashtra has strong presence in chemical, petrochemicals, oil and gas sector. Maharashtra contributes 27.4% of total chemicals, petrochemicals and oil and gas output and around 15% of the total production of basic petrochemical products in India. Mumbai, Nagothane, Rabale & Patalganga are major petrochemical hubs while Thane, Mumbai, Pune and Wardha are chemical hubs.

 

RESOURCES:

Maharashtra has a well developed chemical and petrochemicals sector that has been doing extremely well on the economic front. The chemical industry in Maharashtra is among the main industries which has an important contribution to the economy of the state. There are many categories of the chemical industries in Maharashtra such as agrochemicals, dye & pigments, inorganic chemicals, petrochemicals, polymers, textile chemicals, pharmaceuticals etc. Chemical sector has been traditionally strong in Maharashtra with specific strength in Raw materials, Building Block production and Value Addition & Processing with clusters located in the Mumbai, Thane, Pune belt. Maharashtra has a strong skilled labour base supporting the chemical industry. The state offers a strong educational infrastructure with technical institutions providing Chemical engineering courses across the state. There is a strong resource pool and backward linkages with the well-developed chemicals and petrochemicals sector serves as an added advantage. All major domestic and number of global chemicals & petrochemicals players have a presence in the state. It contributes 27.4 per cent of the country's chemicals, petrochemicals and oil & gas output. The state also accounts for 18.2 per cent of the country's employment in the sector. The chemical sector in the country is expected to grow at 15 per cent per annum till 2010 and thus, presents ample opportunities for the state. Opportunities would primarily exist in the areas of polymers & plastics, fertilisers and synthetic yarns. Some of the names are Hindustan Petroleum, Bharat Petroleum, Reliance Industries, and Indo-Rama Synthetics. Maharashtra has a strong presence in the chemicals, petrochemicals, and oil and gas sector.

 

GOVERNMENT POLICIES:

·        Licensing requirements have been removed, except for hazardous chemicals and a few special drugs.

·        Entrepreneurs are allowed to set up chemicals industries following the Industrial Entrepreneurs Memorandum (IEM) route.

·        Under the automatic route, 100% FDI is allowed for all chemicals except hazardous chemicals.

·        In the Union Budget 2009-10, the Department of Chemicals and Petrochemicals was granted an outlay of USD 5.12 Billion

·        To mitigate the impact of anti dumping, Government has imposed 20% safeguard on soda ash

·        The peak rate of customs duty on most chemicals is 7.5%.

·        Plans are underway to set up port-based chemicals parks in SEZs to encourage clustering, provide infrastructure and enable tax concessions.

·        16% excise duty on almost all chemicals

·        Downstream SEZs have been planned to use the output of chemicals parks

 

 

Food and Agro Sector: Project Opportunities in Maharashtra

 

PROFILE:

India is one of the world’s largest producers as well as consumers of food and food products Maharashtra is a bio-diverse state with 9 agro climatic zones and varying soil types, suitable for agricultural development. The export from Maharashtra for fresh vegetables and fruits accounts for 30% and for processed food products is almost 50%. Mumbai port (MPT) and Jawaharlal Nehru Port (JNPT) are major ports used for exporting processed food products. The state has a strong skill base with a total of 73 institutions with an intake capacity of 5,895 students including 4 Agriculture Universities and 5 national level research organizations. Maharashtra has 8 Agricultural Export Zones (AEZ).

RESOURCES:

Reaching top most position in the country Maharashtra is India’s leading agriculture state.  The state has achieved many innovative agro-industrial ventures, the sugar co-operative and cooperatives for cultivating and marketing, including exports of grapes, mangoes, strawberries etc. Wide availability of varied horticultural produce due to varied range of climate & soil conditions offers tremendous scope to flourish state’s processing industry to increase the processing & value addition from present 1.5% to reach up to 35% of total produce.  Bio-diverse state with 9 agro climatic zones and varying soil types is suitable for agricultural development. Maharashtra is the major horticulture state with more than 22.04 lakh hectares area under horticulture and 4.48 lakh hectare area under vegetables. Alphonso Mangoes accounts for 90% of India’s export in mangoes. It leads sugar industry with 201 sugar factories. The export from Maharashtra for fresh vegetables and fruits accounts for 30% and for processed food products is almost 50%. Maharashtra has the highest gross value addition to food products in the country 16.18%. Maharashtra has eight Agri Export Zones spread across the state for Grapes and Grape Wine, Mangoes, Kesar Mango, Flowers, Onion, Pomegranate, Banana and Oranges. It also has additional five crop cluster for Cashew, Sapota, Sweet Orange, Fig and Custard Apple.

GOVERNMENT POLICIES:

Maharashtra Government initiatives are very unique to make agriculture, horticulture, Agri business, Food Processing industry highly competitive and successful in the country.

·         Reimbursement of 50% of the net VAT paid, instead of 25%;

·         5% interest subsidy on term loans for fixed capital investment for 5 years;

·         In the case of products attracting zero VAT, incentives against the amount of VAT retained and not refunded on input purchases.

·         Eligibility criteria (additional investment of 25% subject to a minimum of INR 1 crore) for providing incentives in the case of expansions under PSI 2007

·         The National Horticulture Mission (NHM) provides 50% of the capital cost with a cap of Rs. 3 lakh per unit for basic infrastructure.

 

 

 

 

 

Textile Sector: Project Opportunities in Maharashtra

 

PROFILE:

The textile industry occupies a leading position in the hierarchy of the Indian manufacturing industry. It has witnessed several new directions in the era of liberalization. While textile exports are increasing and India has become the largest exporter in world trade in cotton yarn and is an important player of readymade garments, country’s international textile trade constitutes a mere 3% of the total world textile trade The textile industry is one of the most important pillars of the Indian economy. It contributes about 4% to the GDP, and 17% to the country’s export earnings. It provides direct employment to over 35 million people. Indian textile industry is estimated to be at USD 51.4 billion. The industry accounts for 4% of the country’s GDP and 14% of its industrial production. Maharashtra contributes to about 10.4% to India’s textiles and apparels output. Maharashtra has the largest area under cultivation for cotton (33.4%). The State has witnessed 122 major textile projects with an investment of USD 224 Million.  There exists largest number of the sectors 100% export oriented units, with a count of 560 are based in Maharashtra.

 

RESOURCES:

Maharashtra contributes to about 10.4% to India’s textiles and apparels output. Cotton is available in bulk in Maharashtra which is one of the key factors that have enabled the state to establish a competitive edge. Vidarbha region has a predominant cotton production, while western region is famous for spinning mills. The major clusters of Maharashtra for the industry are Kolhapur, Mumbai, Nagpur, Nashik, Pune, Sangli, Satara, Sholapur and Thane. The State has witnessed 122 major textile projects with an investment of USD 224 Million.  There are largest numbers of the sectors 100% export oriented units, with a count of 560 are based in Maharashtra. Maharashtra has abundant raw material availability, cost effective labour pool, growing domestic market & presence across value chain.

 

 

 

GOVERNMENT POLICIES:

The Ministry of Textiles in India has formulated numerous policies and schemes for the development of the textile industry in India. The Government of India recently announced the new National Textile Policy (NTP), with the objective of facilitating the industry to attain and sustain a pre-eminent global standing in the manufacture and export of clothing.

·         Suitable incentive either in capital or in the form of Interest subsidy shall be provided to the Textile units including spinning and ginning pressing units to promote employment.

·         Credit based capital subsidy or suitable interest subsidy on capital investment and working capital shall be provided to the upcoming Textile units including spinning and ginning units to make them self reliance.

·         Providing Technological Upgradation support to the Textile sector under Technological upgradation Fund (TUF) scheme.

·         Setting up of Textile Parks preferably in Vidarbha, Marathwada and Khandesh Region.

·         Rationalize debt equity ratio with special consideration in Marathwada, Vidarbha and Khandesh region.

·         Development of Infrastructure facilities with integration from fibre to garment manufacturing.

·         Pilot projects for power looms in Malegaon and Bhiwandi, Nanded and Nagpur.

 

Small-Scale Industries: Project Opportunities in Maharashtra

 

PROFILE:

Small Scale Industries may sound small but actually plays a very important part in the overall growth of an economy. Small Scale Industries can be characterized by the unique feature of labour intensiveness. The small scale industries sector plays a vital role in the growth of the country. It contributes almost 40% of the gross industrial value added in the Indian economy. It has been estimated that a million Rs. of investment in fixed assets in the small scale sector produces 4.62 million worth of goods or services with an approximate value addition of ten percentage points. The small-scale sector has grown rapidly over the years. The growth rates during the various plan periods have been very impressive.

 

 

 

RESOURCES:

The Maharashtra Small Scale Industries Development Corporation Ltd., popularly known as MSSIDC, was established with a view to giving a new orientation and strength to the development of Small Scale Industries in the State of Maharashtra. The main objective of MSSIDC is to aid, counsel, assist, finance, protect and promote the interests of Small Industries. The Corporation renders assistance to approximately 30000 SSI units in the State. MSSIDC plays a vital role in revival, development and growth of traditional handicrafts of Maharashtra by responding to the diversified need s of rural artisans and marketing their products in India as well as abroad. Over the years, MSSIDC has grown to become India's leading Small Scale Industries Development Corporation, continuously responding to the expanding and diversified needs of Small Scale Industries, Village and Cottage Industries, providing support services like Training and Entrepreneurship Development Programme.

GOVERNMENT POLICIES:

The Policy for Small Enterprises aims to create a congenial atmosphere conducive to the healthy growth of the Small Scale Sector in the State. The broad policy objectives are enumerated below:

·         To achieve an annual growth rate of 15%.

·         To assist the small scale industries in the State to become competitive, domestically as well as internationally.

·         To increase employment generation - particularly by promoting the labour intensive segments.

·         To improve the export performance of the SSI sector by providing adequate support services.

·         To create a more congenial and hassle-free environment for the functioning of the SSI sector

·         To help the SSI sector acquire new technologies and skills so as to compete effectively in the market place.

·         To promote appropriate linkages between the large and small scale sectors in the interest of harmonious industrial development.

·         To strive to promote an appropriate institutional mechanism to revive sick industries

·         To encourage SSI units to grow vertically and graduate, in the course of time, from small scale to medium and large scale unit.

 

 

 

Information Technology Industry: Project Opportunities in Maharashtra

PROFILE:

Information Technology (IT) industry in India is one of the fastest growing industries. Indian IT industry has built up valuable brand equity for itself in the global markets. The Information technology industry in India has gained a brand identity as a knowledge economy due to its IT and ITES sector. The IT–ITES industry has two major components: IT Services and business process outsourcing (BPO). The growth in the service sector in India has been led by the IT–ITES sector, contributing substantially to increase in GDP, employment, and exports. The sector has increased its contribution to India's GDP from 6.1% in 2009-10 to 6.4% in 2010-11. India is a preferred destination for companies looking to offshore their IT and back-office functions. It also retains its low-cost advantage and is a financially attractive location when viewed in combination with the business environment it offers and the availability of skilled people.

RESOURCES:

Considering Maharashtra’s strengths in terms of human resources, connectivity and infrastructure, and the special significance of Information Technology (IT) for generating employment, increasing efficiency and improving the quality of life, the State Government announced its first IT Policy in 1998. It was followed by the IT and IT Enabled Services (ITES) Policy in 2003 which provided comprehensive support for the further development of this sector in Maharashtra. Information technology (IT) sector in tier two cities like Nagpur, Aurangabad and Nashik are any indication, Maharashtra is all set to emerge as the next IT hub, after Bangalore and Hyderabad. So far, the growth of IT industry in the state has been concentrated in the Pune-Mumbai stretch. However, with the new focus in place, tier two cities are expected to mushroom as key IT centres.

 

GOVERNMENT POLICIES:

Government of Maharashtra has been supporting development of industry and business through a series of far-reaching policy initiatives. The Information Technology industry has been an important thrust area and has been receiving government support. During the last five years, the Government focussed on HRD, IT related infrastructure, fiscal incentives to IT units, IT in Governance and Institutional Framework for the IT sector.  These initiatives have enabled the IT industry in the State to establish an initial lead and a firm foundation for a quantum leap has been laid. Exports of software and ITES from the State presently account for about 20% share of the country’s exports.  These exports have registered an annual growth of more than 30% during the last four years. The whole State has been connected through an Optical Fibre Cable Network and a state wide network of competent training institutions has been established for building a pool of world-class IT professionals for providing strength and support to the IT industry in the State.

 

Biotechnology industry: Project Opportunities in Maharashtra

 

PROFILE:

Biotechnology deals with living systems, including plants, animals and microbes. Biotechnology derives its strength by harnessing biological processes that sustain life. It incorporates any technique, which uses living organisms, parts of organisms and enzymes, proteins, etc., which are either naturally occurring or are derived from such living systems. Such techniques can be used to make or modify the products, improve plant or animal productivity or develop microorganisms for special use. Emerging Biotechnology uses recombinant DNA, cell fusion, embryo manipulation, etc. Biotechnology has the potential to transform the lives of the people in the State by impacting hugely on agriculture, animal husbandry, health, environmental protection, material transformation, etc. Further, Maharashtra has the potential to become a leader in Biotechnology, not only in the country but also in the entire world.

RESOURCES:

The State has an excellent intellectual infrastructure. Through nearly 1000 institutions, it produces around 163,000 trained technical personnel each year. The State has already set up specialised parks for different sections including IT. The bio-industrial enterprises cannot sustain themselves unless they are backed up by a highly trained and skilled human resource. Some of the best Centres of excellence in India that are present in Maharashtra do precisely that. These include the Bhabha Atomic Research Centre, Indian Institute of Technology, Tata Institute of Fundamental Research, University Department of Chemical Technology, and the Cancer Research Institute, all at Mumbai. The Animal Diseases Investigations Laboratory, Pune involved in diagnosis and research of animal diseases, especially in four States of the Western region of the country, has been recognised as reference laboratory by Government of India. New forward looking initiatives in providing specialized education in Biotechnology have already begun to emerge. A number of defence research establishments in the State have been engaged in conducting cutting edge research in Biomedicals, Bioinformatics and Biotechnology.

GOVERNMENT POLICIES:

Maharashtra government is trying to develop biotech industry in the state in order to help to develop affordable and more cost effective drugs and devices to counter diseases common to India and to tropical and sub-tropical areas to reduce the disease burden. To lead the biotechnology industry in the State to a growth path from where it can become globally competitive, the following steps would be taken:

• Providing the appropriate policy framework which will smoothen its path;

• Providing adequate infrastructure, especially in the form of Biotechnology Parks

• Providing an appropriate package of incentives

• Developing a world-class higher education and research base to serve the needs of a growing Biotechnology industry and for creating high quality employment in the State

• Creating supporting institutions for the Biotechnology industry for  the development of human resource as well as for the applications of Biotechnology

• Simplifying the application of labour and other laws and procedures to accelerate the development and growth of the biotechnology industry

• Facilitating new ventures and innovations

 

Waste management: Project Opportunities in Maharashtra

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

RESOURCES:

There are 250 urban local bodies (ULBs) in Maharashtra which comprises 23 Municipal Corporations, 220 Municipal Councils, 3 Cantonment Boards and 4 Nagar Pachayats. Per capita MSW generation in various towns of the state ranges 100 to 600 gram per day.  For class I cities in Maharashtra, the waste generation rates are in the range of 14 to 63 kg per capita per day, which includes Mumbai having the highest range of 0.63 kg per capita per day (pcpd). The average waste generation rate for the state is estimated as 35 kg pcpd.  As per the projection, the waste quantities are estimated to increase from 6.18 million tons per year in the year 2004 to 8.05 million tons per year in 2011 and 11.77 million tons per year in 2021. In total over 21632.3 tons per day (TPD) of MSW is generated of which around 50% is generated in Mumbai (8500 TPD), Thane (680 TPD), Pune (1740 TPD) and Kalyan (1050 TPD). Compare to other Metropolitan cities in India, MSW generation is highest in Mumbai.  Available data indicates that Waste generated in Maharashtra contains about 55% of Non-biodegradable and 45% biodegradable components. 

GOVERNMENT POLICIES

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 7 of 304 | Total 3040 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 303 304   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Zinc Sulphate (Agriculture Grade) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Plant Layout

Zinc sulfate is a powder that is colorless and completely water-soluble. The product can be used in different applications, including some connected with maintaining good health. A number of over the counter products contain some level of zinc sulfate, as well as many prescription medications. In terms of healthcare uses, zinc sulfate is often included as an ingredient in products designed to treat skin conditions. In particular, over-the-counter medications for acne are likely to contain the compound. Lotions and topical creams that are used to treat boils are also likely to contain at least trace amounts of the sulfate. Zinc Sulphate is used in agriculture as a weed killer and to give protection against pests. It is used to supply zinc in animal feeds and fertilizers; Zinc Sulphate is also an important constituent of the precipitating bath in the manufacture of viscose rayon and in electrolyte for zinc plating. Zinc Sulphate functions as a mordant in dyeing; as a preservative for skins and leather; and as an astringent and emetic in medicine. Zinc sulfate is chiefly used in fertilizer applications and animal feed supplements. It is especially applied on crops such as pecan, deciduous fruits, peanuts, cotton, corn, and citrus, and added to feeds for swine and poultry. Zinc will play a larger role in the fertilizer market as demand grows for its use as a micronutrient in growing agricultural crops. Zinc is necessary for energy production, protein synthesis and growth regulation within plants, and can limit plant growth if it is not available in sufficient quantities during key stages of plant development. Demand is already growing in some regions. In 2012 and 2013, for example, China included zinc fertilizer in the national fertilizer recommendations for major crop production. Overall, the move is expected to increase zinc fertilizer production and use in China by an additional 50,000 metric tons to 100,000 metric tons annually. Global zinc chemical production will soon be reaching very high utilization rates. New capacity for zinc chemicals is expected to come online during the next five years, most likely in Asia and in China. So any new entrants can venture in to this industry. Few Indian Major Players are as under:- D C M Shriram Ltd. D D Agro Inds. Ltd. Gujarat State Fertilizers & Chemicals Ltd. Haryana Land Reclamation & Devp. Corpn. Ltd. Hydromet (India) Ltd. Liberty Phosphate Ltd. Vantech Industry Ltd.
Plant capacity: 29 MT/ DayPlant & machinery: Rs. 169 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 438 Lakhs
Return: 26.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

LPG Cylinders - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Liquefied petroleum gas (LPG) is a term describing a group of hydrocarbon-based gases derived from crude oil and or natural gas. Natural gas purification produces about 55 percent of all LPG, while crude oil refining produces about 45 percent. LPG is mostly propane, butane or a mix of the two. It also includes ethane, ethylene, propylene, butylene, isobutene and isobutylene; these are used primarily as chemical feed stocks rather than fuel. The ultimate use of the LPG cylinder is for the storage and transportation of gas from one place to another. As the gas pipe line can only be managed to the nearby area of the gas producing centre, (though it is not applicable in India until now) the use of this cylinder has developed. The technology of transportation, e.g. U.S., U.K. etc. they have formed the system of piping. The supply is regulated a controlled from the initial point. But in India this is not applicable till now. Here the use of cylinder is existing; it is the only mode of supply and transportations of gas for cooking purpose. The LPG cylinder industry has grown phenomenally since early 1980s, when there were just about a dozen manufacturers. There was not much of LPG (liquefied petroleum gas) available for distribution and hence the need for cylinders was limited. Bharat Petroleum Corporation (BPCL) has accordingly initiated the process of launching the transparent fiberglass cylinders as a premium product in the country. The corporation has proposed making these cylinders available on demand with delivery within two hours. Due to demand growth, it is a good project for entrepreneurs to invest. Any entrepreneurs venture into this field will be successful. Few Indian Major Players are as under:- Balaji Pressure Vessels Ltd. Bharat Wagon & Engg. Co. Ltd. Confidence Petroleum India Ltd. Everest Kanto Cylinder Ltd. Haryana Land Reclamation & Devp. Corpn. Ltd. Himachal Pradesh State Civil Supplies Corpn. Ltd. Hyderabad Allwyn Ltd. J R Fabricators Ltd. Kanodia Petroleum Ltd. Karnataka Pressure Vessels Ltd. Mahaveer Cylinders Ltd. Mauria Udyog Ltd. Minda Autogas Ltd. North India Wires Ltd. Pearey Lal & Sons Pvt. Ltd. Punjab Gas Cylinders Ltd. Rajasthan Cylinders & Containers Ltd. Sanmati Metals Ltd.
Plant capacity: L.P.G. Cylinders (14.2 Kgs Size): 180 Nos./Day, L.P.G. Cylinders (19 Kgs Size): 180 Nos./Day Plant & machinery: Rs. 310 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 547 Lakhs
Return: 21.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Linear Alkyl Benzene (L.A.B) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Linear alkyl benzene is a family of organic compounds with the formula C6H5CnH2n+1. Typically, n lies between 10 and 16, although generally supplied as a tighter cut, such as C12-C15, C12-C13 and C10-C13, for detergent use. The CnH2n+1 chain is un-branched. They are sometimes called LABs. They are mainly produced as intermediate in the production of surfactants, for use in detergent. Since the 1960s, LABs have emerged as the dominant precursor of biodegradable detergents. Virtually all linear alkyl benzene (LAB), also known as detergent alkylate, is converted to linear alkyl benzene sulfate (LAS), which is used almost exclusively as a surfactant in detergents and cleaning products. This compound is widely used in a variety of cleaning products used in household applications or in industrial settings because it is versatile and relatively inexpensive. Various applications fields are: • Laundry • Washing Dishes • Soap Bars • Household Cleaning Supplies India is reeling under over supply of LAB, as the domestic demand is comparatively lower than the domestic capacity and production. The total domestic demand is estimated at around 300000 TPA, while the capacity is close to 500000 TPA. The players are exporting their surplus to ensure higher capacity utilization. IOC has established world's largest single-train LAB plant in Baroda with an installed capacity of 120000 TPA in August 2004. Tamil Nadu Petro products has LAB capacity of 120000 TPA. As a whole it is a good project for entrepreneurs for investment. Few Indian Major Players are as under:- Exotic Coal Ltd. M T Z Industries Ltd. Nirma Ltd. Reliance Industries Ltd. Rhodia Specialty Chemicals India Ltd. S M Z S Chemicals Ltd. Syncom Healthcare Ltd. Tamilnadu Petroproducts Ltd.
Plant capacity: 20 MT/ DayPlant & machinery: Rs. 220 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 677 Lakhs
Return: 29.00%Break even: 62.00%
Add to Inquiry Add to Inquiry Basket

Copper Melting and Copper Ingot Rolling with Copper Wire Drawing - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Copper is mankind’s oldest metal, dating back some 10,000 years. All of the great civilizations of the past used copper and copper alloys (principally bronze and later brass) for both decorative and utilitarian purposes. Copper was used for military purposes, artistic applications such as church bells and statuary, tools and numerous other functional objects. However, it was the Industrial revolution that brought about a tremendous change in the production and consumption of copper and copper alloys. An ingot is a material, usually metal, that is cast into a shape suitable for further processing. Ingots require a second procedure of shaping, such as cold/hot working, cutting or milling to produce a useful final product. Wire rod produced by continuous cast, pure copper rod for making wire that is drawn down to various types of coated and uncoated wire. Global industrial demand for refined copper is over 14 mn tonne and its usage is growing by around 3% per annum. Developing countries account for over one-third of refined copper consumption. The domestic copper pipes and tubes industry is estimated to have a turnover of Rs 10 bn. It is expected to return a 25% growth in the next two-three years, according to industry estimates. A substantial part of total demand is met through domestic production. The gap is met through imports, growing at 25% by end users, such as refrigeration industry. Due to demand growth, it is a good project for entrepreneurs to invest. Any entrepreneurs venture into this field will be successful. Few Indian Major Players are as under:- Advance Powerinfra Tech Ltd. Alcobex Metals Ltd. Bagade India Engg. Ltd. Bhagyanagar India Ltd. Bharat Insulation Co. (India) Ltd. C M I Ltd. Copper Semis Pvt. Ltd. Dharmadeep Powerdive Inds. Ltd. Finolex Cables Ltd. Finolex Wire Products Ltd. G K Winding Wires Ltd. Ganga Electrocast Ltd. Goldstar Metals Ltd. Hindalco Industries Ltd. Hindustan Transmission Products Ltd. Indo Gulf Corpn. Ltd. Indo-American Electricals Ltd. Kinetic Copper Products Ltd. Laser Cables Pvt. Ltd. M P Telelinks Ltd. Marathon Electric India Pvt. Ltd. Mardia Samyoung Capillary Tubes Co. Ltd. Nissan Copper Ltd. Patron Industries Pvt. Ltd. Powerflow Ltd. Robot Systems Pvt. Ltd. S K M Steels Ltd. Salzer Electronics Ltd. Shakti Insulated Wires Pvt. Ltd.
Plant capacity: Copper Ingot: 8 MT/Day, Copper Rod: 36 MT/Day, Copper Wire: 4 MT/Day Plant & machinery: Rs. 278 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 1201 Lakhs
Return: 62.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Beer, Whisky & Rum - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Beer is the world’s most widely consumed alcoholic beverage; it is the third-most popular drink overall, after water and tea. It is thought by some to be the oldest fermented beverage. Beer is produced by the saccharification of starch and fermentation of the resulting sugar. Whisky is distilled from a grain mash, at below 160 proof, so as to maintain the flavors of the grain. The spirits category of "Whisky" encompasses several different products, including: Bourbon, Corn whisky, Rye whisky,Canadian, Irish or Scotch whisky. Rum is one of the oldest and most varied of distilled spirits. It is distilled from the extracted juice of the sugar cane plant, or in some cases the by-product of the refining process known as molasses. Uses of Beer Whisky and Rum Beside alcoholic beverage beer, whisky and rum can also be used for the following process: • Beer is a surprisingly good wood furniture polish. • Bear can be used to marinate meat. • Beer can be used to polish gold jewellery. • Beer can remove coffee or tea stains from rugs. • Rum can be used as an antiseptic when there is no anti bacterial soap handy. • The bottles in which rum are stored can be considered collectible. • When consumed in moderate amount it can prevent kidney stones. • Rum can be use as sedative to sleep well. • Rum can be drunk to reduce risk of diabetes. • Used when cooking various foods and recipes to enhance flavor. • It can be use to improve vascular health too. Of the over Rs 280 bn liquor industry (excluding beer) selling around 450 mn cases annually, a large peg of which (67%) is whisky, followed by brandy and gin at 13%, rum at 17% while the white spirits account for 3% of the market share. Of this, the Indian-made foreign liquor (IMFL) accounts for Rs 78 bn (86 mn cases) with whisky alone constituting 95%. Besides, there is a large 223 mn case market of low-priced country liquor. Indian spirit market also consumes branded country liquor worth Rs 125 bn and unbranded country liquor worth Rs 50 bn. As a whole establishing Beer, Whisky & Rum plant is one of the project which has good prospect for the entrepreneurs to invest.
Plant capacity: Beer (650 ml Bottle): 10000 Nos./ Day,Beer (500 ml Can): 5000 Nos./ Day,Whisky (750 ml Bottle): 10000 Nos./ Day,Rum (750 ml Bottle): 10000 Nos./ DayPlant & machinery: Rs. 654 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 1838 Lakhs
Return: 31.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Turmeric and Ginger Oil - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Ginger, one of the most important and oldest of spices used in every kinds of food preparation. The rhizomes known in the trade as hand or races reach the spice trade either, with the outer cortical layers intact (Coated unscraped ginger) or with the outer coating partially or completely removed. To improve their appearance some grades of ginger are bleached by various means by liming. The turmeric (Curcuma longa) plant, a perennial herb belonging to the ginger family, is cultivated extensively in south and southeast tropical Asia. The rhizome of this plant is also referred to as the?root and is the most useful part of the plant for culinary and medicinal purposes. The most active component of turmeric is curcumin, which makes up 2 to 5% of the spice. Ginger is cultivated in India, China, Japan, Indonesia, Australia, Nigeria and West Indies islands. India is the largest producer and consumer of ginger in the world. In India ginger is produced in the states of Orissa, Kerala, Karnataka, Arunachal Pradesh, West Bengal, Sikkim and Madhya Pradesh. Kerala is the largest ginger producing state, accounting for about 33 percent of the total production in India. Out of the total production, about 30 percent is converted into dry ginger, while 50 percent is consumed as green ginger and the rest as seed materials. Dry ginger is produced mainly in Kerala, a major share of which is exported. As a whole it is a good project for entrepreneurs for investment. Few Indian Major Players are as under:- A M Todd Co. India Pvt. Ltd. A V T Natural Products Ltd. Absolute Aromatics Ltd. Concert Spices & Exports Ltd. Enjayes Natural Flavours Ltd. Floral Aroma Ltd. Indfrag Ltd. Kancor Flavours & Extracts Ltd. Keva Biotech Pvt. Ltd. Keva Flavours Pvt. Ltd. Naturite Agro Products Ltd. Novo Agritech Ltd. Oriental Aromatics Ltd. Privi Organics Ltd. R K S Agrotech Ltd. Sharp Menthol India Ltd. Sijmak Oils Ltd. South East Agro Inds. Ltd. Surya Vinayak Inds. Ltd. Synthite Industries Ltd. Tamilnadu Forest Plantation Corpn. Ltd. Vaishali (India) Ltd.
Plant capacity: Turmeric Oil: 162.5 Kgs/Day,Curcumin: 162.5 Kgs/Day,Turmeric Oleoresin : 375 Kgs/Day, Turmeric Residue: 1600 Kgs/Day,Ginger Oil: 115 Kgs/Day • Ginger Oleoresin : 315 Kgs/Day • Ginger Residue : 3400 Kgs/Day • Turmeric Leaf Oil : 7.5 Plant & machinery: Rs. 502 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 831 Lakhs
Return: 32.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Dehydrated Onion & Onion Powder

Onion is one of major bulb crop grown in India which presently attracting attention of all persons due to rise in prices. The price is directly related to supply-Demand of the commodity. An Indian farmer normally pays more attention to grow those crops which are fetched very good market prices during last season. To get the very good prices during present season, many farmers switch to grow Onion crop due to which supply in the market increases many fold and market glut fetches very low prices to farmer’s commodity such as onions. Dehydrated onions are used chiefly as a constituent in various food products i.e. they are sold to manufacturing concerns as an industrial raw material and demand for dehydrated onions is a function of the demand of these food products. However there is a demand for dehydrated onions for use as culinary onions, both by large catering concerns - institutions and industrial canteens; and for domestic use. In India dehydration of many food products especially vegetables and some fruits are in practices at home and industry level throughout year. Onion is an important vegetable crop grown in India and forms a part of daily diet in almost all households throughout the year. India is the second largest producer of onion in the world 7 onion is one of the most important but perishable groups known. It is also used for medical purpose. But due to non-availability of appropriate post-harvest storage facilities, 20-25% of the total produced onions are wasted, which in terms of value amounts to crores of rupees. As a whole it is a good project for entrepreneurs for investment. Any entrepreneurs venture into this field will be successful. Few Indian Major Players are as under:- Aarkay Food Products Ltd. Coduras Exports Ltd. Gujarat Dehyd Foods Ltd. Jain Irrigation Systems Ltd. L M P Gujarat Agro Exports Ltd. Orient Vegetexpo Ltd. S Y P Agro Foods Ltd. Tirupati Vegpro (India) Ltd. Unique Organics Ltd.
Plant capacity: Dehydrated Onion (Chopped and Sliced) : 3 MT/Day,Dehydrated Onion Powder: 3 MT/Day Plant & machinery: Rs. 215 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 503 Lakhs
Return: 25.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

HDPE Woven Sacks - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

High density polyethylene or HDPE woven sacks have become a versatile commodity in the packaging industry Introduced for the first time in India during the year 1969 it has over the years replaced the conventional jute bags to a large extent. HDPE sacks have an edge over the conventional jute sacks in the sense that the former are light in weight, strong and attractive. These sacks are immune to the effect of corrosion, decay, moisture, atmosphere, rats, rodents, moths and insects. Being superior in quality and economic as compared to the traditional jute material, these modern sacks have gradually captured a large market for packing fertilizers, chemicals, food stuffs, animal foods, oil cakes etc. Sacks made of HDPE are laminated with LDPE inside it. This gives protection against moisture, air and the material packed cannot penetrate out of the sack. Applications of HDPE Woven Sacks: The HDPE bags are used in bulk packaging of diverse material including: • Plastic Resins • Granules • Chemicals • Milk Powder • Rubber • Chemicals • The current demand of woven sacks in North Eastern Region is estimated to be in the range of 600 - 650 MTPM of which only 60 - 70% of the requirement is fulfilled by local industries, Cement, Fertilizer and Flour Mills are major woven sacks consuming sectors in North-Eastern Region. The only fertilizer complex (urea based) of NER is located in Assam with installed capacity of 0.5 MMTPA, and has reported a production growth of 12% in the past five years. Apart from urea complex, there are 9 bio-fertilizer units in the region with a total installed capacity of 1115 MTPA. Thus, it is a good project for entrepreneurs to invest. Few Indian Major Players are as under:- Aditya Polymers Ltd. Kamakhya (India) Ltd. Neo Corp Intl. Ltd. Nirmaan India Ltd. Oripol Industries Ltd. Polyspin Exports Ltd. Primo Pick N Pack Ltd. Propene Products Ltd. Prudential Polywebs Ltd. S P L Industries Ltd. (Maharashtra) Safepack Polymers Ltd. Shankar Packagings Ltd. Tulsyan N E C Ltd.
Plant capacity: 71000 Nos./ DayPlant & machinery: Rs. 336 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 663 Lakhs
Return: 26.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

Bitter Gourd (Karela) Powder - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Karela is a vegetable which is grown in every part of India. Karela is especially grown in India in from April to August. In the session it is abundantly available. It is generally used as vegetable throughout India. It has also good medicinal value. It is generally bitter in taste. Karela powder is now special product which can be produced by spray drying process. Bitter gourd fruit is a good source of carbohydrates, proteins, vitamins, and minerals and have the highest nutritive value among cucurbits. The vitamin C content of Chinese bitter gourd varies significantly. Bitter gourd has been used for centuries in the ancient traditional medicine of India, China, Africa, and Latin America. Bitter gourd extracts possess antioxidant, antimicrobial, antiviral, antihepatotoxic and antiulcerogenic properties while also having the ability to lower blood sugar. These medical activities are attributed to an array of biologically active plant chemicals, including triterpenes, pisteins and steroids. Uses of Karela Powder • It can be used in the preparation of concentrated vegetable soup. • It can be used for the preparation herbal base medicine. • It can be used also in the preparation of cosmetics powder. As bitter gourd powder finds its major application in ayurvedic medicine, it would be suffice to gauge the demand for ayurvedic medicine. Ayurvedic medicines are produced by several thousand companies in India, but most of them are quite small, including numerous neighborhood pharmacies that compound ingredients to make their own remedies. It is estimated that the total value of products from the entire Ayurvedic production in India is on the order of one billion dollars (U.S.). The industry has been dominated by less than a dozen major companies for decades, joined recently by a few others that have followed their lead, so that there are today 30 companies doing a million dollars or more per year in business to meet the growing demand for Ayurvedic medicine. So any new entrants can venture in to this industry.
Plant capacity: 500 Kgs. / DayPlant & machinery: Rs. 97 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 236 Lakhs
Return: 24.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Market Research Report on Future Potential of Flexible Packaging in India (Present Status, Growth Prospects, Emerging Trends, Opportunities, Demand-Supply, Market Size, Sector Outlook, Analysis & Forecasts upto 2017 with Financial Comparison of Major Play

Packaging adds value to products for a consumer and has a vital role to play in a product’s journey from manufacturer to end consumers. It is a key inducer of sales in the wake of evolving consumer needs and preferences. In India and as well as around the globe, flexible packaging solutions have emerged as the high growth segment of the packaging industry. Flexible packaging has been at the forefront since the last 4-5 years amidst growing need for convenient packages among consumers as well as the producers. Flexible packs are a boon for both parties and tapping the potential of the industry, Niir Project Consultancy Services has released a study on the industry titled ‘Market Research Report on Future Potential of Flexible Packaging in India (Present Status, Growth Prospects, Emerging Trends, Opportunities, Demand-Supply, Market Size, Sector Outlook, Analysis & Forecasts upto 2017 with Financial Comparison of Major Players)’. The report provides industry insights like present status, factors that will drive the growth, the emerging trends, prevalent opportunities, demand supply scenario and key player information. The report begins by discussing the current scenario of the industry and briefing on packaging industry on the whole. Further it moves ahead for elaborating on factors that will drive the growth of the industry. Flexible packaging industry has found its applicability extensively in high growth industries like FMCG and pharmaceuticals. The growth in such user industries is bound to reflect in the flexible packaging numbers. Factors like growing incomes, middle class population, urbanization and surging organized retail in the country will also lend a hand to the sector. Navigating ahead, the report then discusses the upcoming trends in the industry along with the opportunities and challenges faced by the flexible packaging sector. The report classifies factors such as rising government focus on healthcare, low capita consumption levels of flexible packaging and surge in the food processing industry as key opportunities for flexible packaging. Raw material fluctuations and mounting environmental concerns regarding the extensive use of plastics are some challenges encountered by the sector. The report moves ahead to analyze demand-supply situation in the industry. The demand is captured by analyzing the demand for flexible packaging films while supply is demonstrated by listing the capital expenditure projects announced by the incumbents. The above mentioned data is supported by graphical representation and forecasts of key indicators. A thorough analysis of the industry is incomplete without the key player information. The next segment of the report shares information of players operating in the industry by providing company profiles and detail financial information. It includes company profiles of players like Huhtamaki PPL Ltd, Uflex Ltd, Polyplex Corporation Ltd and EsselPropack Ltd while financial information like address of registered office, director’s name and financial comparison covering balance sheet, profit & loss account and several financial ratios of the players is discussed. The report ends with a positive outlook of the flexible packing industry in India along with its market sizing numbers. Indian consumer’s spending patterns and product awareness have gone through a colossal change which has contributed in the high consumption of flexible packaging in the country. Rising incomes, mounting health awareness and evolving eating habits of the Indian consumers will keep pouring in growth for the user industries like FMCG and Pharmaceutical and thus willalso keep the flexible packaging industry in good shape. Reasons for Buying this Report: • This research report helps you get a detail picture of the industry by providing overview of the industry along with the market structure and its classification • The report provides in-depth market analysis covering major growth driving factors for the industry, emerging trends and opportunities prevalent • This report helps to understand the present status of the industry by elucidating a comprehensive scrutiny of the demand – supply situation with forecasts • Report provides analysis and in-depth financial comparison of major players/competitors • The report provides forecasts of key parameters which helps to anticipate the industry performance Our Approach: • Our research reports broadly cover Indian markets, present analysis, outlook and forecast for a period of five years. • The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players • We use reliable sources of information and databases. And information from such sources is processed by us and included in the report Table of Contents 1 OVERVIEW 2 INDUSTRY GROWTH DRIVERS 2.1 Growth in User Industries 2.1.1 FMCG Sector 2.1.2 Pharmaceutical Sector 2.2 Rising Disposable Incomes 2.3 Urbanization & Convenience 2.4 Large Middle Class Population 2.5 Growing Health Consciousness 2.6 Surge in Modern Retail 3 EMERGING TRENDS 3.1 Changing Pharmaceutical Packaging 3.2 Stand Up Pouches 3.3 Recyclable Packaging 3.4 Convenient Pack Sizes 4 OPPORTUNITIES & CHALLENGES 4.1 Opportunities 4.1.1 Growing Population Base 4.1.2 Government Focus on Healthcare 4.1.3 Surge in Food Processing 4.1.4 Low Per Capita Consumption Levels 4.2 Challenges 4.2.1 Raw Material Fluctuations 4.2.2 Environmental Concerns 5 DEMAND-SUPPLY SCENARIO 5.1 Demand Analysis 5.2 Supply Analysis 6 KEY PLAYER INFORMATION 6.1 Key Player Profiles 6.1.1 Uflex Ltd 6.1.2 Huhtamaki PPL Ltd. 6.1.3 EsselPropack Ltd 6.1.4 Polyplex Corporation Ltd 6.2 Peer Group Financials 6.2.1 Contact Information 6.2.1.1 Registered Office Address 6.2.1.2 Director’s Name 6.2.2 Key Financials 6.2.2.1 Plant Location 6.2.2.2 Plant Capacity & Sales 6.2.2.3 Raw Material Consumption 6.2.3 Financial Comparison 6.2.3.1 Assets 6.2.3.2 Liabilities 6.2.3.3 Structure of Assets & Liabilities 6.2.3.4 Growth in Assets & Liabilities 6.2.3.5 Income & Expenditure 6.2.3.6 Growth in Income & Expenditure 6.2.3.7 Cash Flow 6.2.3.8 Liquidity Ratios 6.2.3.9 Profitability Ratios 6.2.3.10Return Ratios 6.2.3.11Working Capital & Turnover Ratios 7 MARKET SIZE & OUTLOOK 8 ABOUT NPCS 9 DISCLAIMER List of Figures & Tables Figure 1 Indian Packaging Industry- Classification Figure 2 Indian Packaging Industry- Segmentation Figure 3 Materials Used & Industries Served by Flexible Packaging Figure 4 Indian FMCG Industry- Market Size (2003-17, In USD Billions) Figure 5 Indian Pharmaceutical Industry- Market Size (2005-17, In USD Billions) Figure 6 India's Annual Per Capita Income (2008-14, In INR) Figure 7 Indian Population- Rural & Urban (In Crores) Figure 8 Indian Middle Class Population (2011-2026) Figure 9 Population of India (2008-17, In Millions) Figure 10 FDI in Food Processing Industry in India (2011-14, In INR Millions) Figure 11 Per Capita Consumption of Flexible Packaging around the World Figure 12 Demand for Flexible Packaging Films in India (2007-17, In Thousand Tonnes) Figure 13 Uflex Ltd.- Shareholding Pattern (June 2014) Figure 14 Huhtamaki PPL Ltd- Shareholding pattern (June 2014) Figure 15 EsselPropack Ltd- Shareholding Pattern (March 2014) Figure 16 Polyplex Corporation Ltd- Shareholding Pattern (March 2014) Figure 17 Flexible Packaging Industry in India- Market Size (2009-17, In USD Billions) Table 1 Central Government's Plan Outlay on Healthcare (In INR Billions) Table 2 Scheme wise Funds Allocated & Released for Food Processing Industry in India (2009-13, In INR Crores) Table 3 Capital Expenditure Projects Announced in Indian Flexible Packaging Sector Table 4 Uflex Ltd- Financial Summary (2011-13, In INR Millions) Table 5 Huhtamaki PPL Ltd- Financial Summary (2012-13, In INR Millions) Table 6 EsselPropack Ltd- Financial Summary (2012-14, In INR Millions) Table 7 Polyplex Corporation Ltd- Financial Summary (2011-13, In INR Millions)
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 7 of 304 | Total 3040 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 303 304   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top