Google Search

Search

Already a Member ?

Best Business Opportunities in Jharkhand- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mining & Minerals: Project Opportunities in Jharkhand

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

The newly carved out resource rich State of Jharkhand is widely acclaimed as the region of the future, having immense potential for industrialisation with its large deposits of minerals which could provide a firm launching pad for various industries.

RESOURCES:

Jharkhand is one of the richest zones of minerals in the world. The 40% of the total minerals of the country are available in this state. The State is the sole producer of cooking coal, uranium and pyrite. It ranks first in the production of coal, mica, kyanite and copper in India. The geographical exploration and exploitation of gold, silver, base metals, decorative stones, precious stones, etc. are the potential areas of the future. Jharkhand is also endowed with other resources such as surface and ground water, land with immense bio-diversity, moderate climate, disciplined and skilled manpower, adequate availability of power, which are the basic essentials for the growth and development of industries.

GOVERNMENT POLICIES:

Jharkhand region is generously endowed with Mineral Wealth and the State Government is committed to create an environment conducive to the growth of Mining and Mineral based Industries in the State. In view of this, the State's Industrial policy covers certain clauses relevant for Mining and Mineral sector, which are enumerated below:

•        Simplify procedures and expedite granting of mining leases.

•        Provide certain relief to make mining activities easier.

•        Encourage use of modern exploration techniques to set up a resource inventory of various minerals in the State.

•        Encourage joint venture projects with SMDC.

•        Clear mining lease applications and project report within 60 days.

•        Encourage foreign investment and technological collaboration by OCBs and NRIs in selected sectors including Mineral development.

•        Encourage Private Sector participation in Mining Activities

Jharkhand State Mineral Development Corporation Ltd. was incorporated on 7th May, 2002 after bifurcation from Bihar State Mineral Development Corporation Ltd. JSMDC is a Government of Jharkhand Undertaking under the Dept. of Mines & Geology, Govt. of Jharkhand. It is premier producer and supplier of minerals and mineral based products in the State of Jharkhand. Core business of the Company is production and marketing of coal, limestone and its powder, kyanite, graphite, granite blocks and manufacturing of granite tiles of smaller dimensions. JSMDC is a consistently making profit company. Annual turnover is more than 100 Crores in the current fiscal year.

 

 

 

Agro-Based Industries: Project Opportunities in Jharkhand

 

 

PROFILE:

 

Agro-based industry would mean any activity involved in cultivation, under controlled conditions of agricultural and horticultural crops, including floriculture and cultivation of vegetables and post-harvest operation on all fruits and vegetables. The development of agro-industries has assumed crucial importance in the economic planning and progress of the country. The agro industry is regarded as an extended arm of agriculture. The development of the agro industry can help stabilise and make agriculture more lucrative and create employment opportunities both at the production and marketing stages. The broad-based development of the agro-products industry will improve both the social and physical infrastructure of India. Since it would cause diversification and commercialization of agriculture, it will thus enhance the incomes of farmers and create food surpluses. The state of Jharkhand having diversified agro-climatic conditions is much suited for the development horticulture based economy that has ample scope for its growth.

RESOURCES:

The agro-climatic conditions of the State are conducive for commercial cultivation of large varieties of fruits, vegetables,flowers and medicinal and aromatic plants. Plantation and Horticulture is one of the important sub sectors of Agriculture having ample scope for expansion in the state of Jharkhand. The state of Jharkhand has a total geographical area of 79.7 lakh ha out of which cultivable land is 38 lakh ha. The net irrigated area is only 1.57 lakh ha which is only 8% of the net sown area. The total area occupied for plantation and horticulture crop in the state is about 2.57 lakh hectares. Different kinds of fruits are grown in Jharkhand. The crops grown in Jharkhand are Mango, Litchi, Stone fruit (Peach), Citrus (Lime/Lemon), Awla and Papaya in fruits, Chilli, Turmeric and Ginger in spices, Rose, Marigold, Gerbera, Carnation and Gladiolus among flowers, Lemon grass, Palmarosa and Rosa damascena in aromatic plants, Cashew in Plantation crops. Jharkhand endowed with vast impounded fresh water resources in the form of tank/ponds and reservoirs. The major plantation crops cultivated in the State are cashew nut and coconut. The Board has identified the State as high potential State for coconut cultivation as the average productivity of coconut palm is 36 nuts per palm, which is above the national average of 34 nuts. Cashew nuts popularly known as a gold mine of wastelands is very ideal for cultivation in wastelands and hence there is good potential for cashew cultivation especially in East and West Singhbhum districts. Tea plantation in a small measure has been taken up in Ranchi district, which has a favourable climate for growing tea.

 

 

 

GOVERNMENT POLICIES:

 

 The promotion of Agro-based industries is among the priorities of the State Government. The state has assured supply of fruits & vegetables grown by applying scientific techniques, investment in post harvest and good transport infrastructure. The National Horticulture Mission (NHM) in the Jharkhand State was launched in late 2005-06 initially in 10 districts with main focus on production of planting materials, vegetable seed production, establishment of new gardens, creation of water resources etc. Establishment of new gardens include perennial and non perennial fruits, spices, floriculture, aromatic and medicinal plants. This scheme was 100 % sponsored by Central Govt. during 2005-06 and 2006-07 (Xth Five Year Plan). However, during 2007-08 and onwards (XIth Five Year Plan) this scheme has been implemented in 15 districts with the pattern of assistance as 85:15 by Central Govt. and State Govt. respectively. The Jharkhand government has decided to set up a food park to kick off the development of the food processing sector in the state and attract investors. In general very few small scale food processing industries are present in the state.

 

 

 

 Sericulture (Tasar Silk): Project Opportunities in Jharkhand

 

PROFILE:

Sericulture is an agro-based industry. It involves rearing of silkworms for the production of raw silk, which is the yarn obtained out of cocoons spun by certain species of insects. The major activities of sericulture comprises of food-plant cultivation to feed the silkworms which spin silk cocoons and reeling the cocoons for unwinding the silk filament for value added benefits such as processing and weaving. Silk is a fine strand of fiber that is a solidified secretion produced by certain caterpillars to encase themselves in the form of cocoons. India is second largest producer of silk. Sericulture industry is looking out for the developments of young age silk worm rearing or chawki rearing. Care of silk worms start from the stage of procurement of silk worm eggs from the grainage itself. Silk worm eggs are distributed to the farmers for commercial rearing when active development of embryo is in progress. The important aspect of young silkworm rearing management are a suitable separate rearing house or room, well maintained mulberry garden with assured irrigation facilities. Sericulture has emerged as a virtual lifeline and a profitable employment avenue for villagers in Maoist-affected areas in India's eastern Jharkhand. Under the aegis of the Jharkhand state industrial department, farmers are beginning to rear silkworms.

RESOURCES:

Jharkhand, much like Chattisgarh and Uttaranchal, is endowed with adequate forest cover. These forests are home to two species of trees -Arjuna (Terminalia Arjuna) & Asan (Terminalia Tomentosa) which are breeding ground for the moth which produces the cocoon from which Tasar yarn is reeled. Jharkhand's forest department is also planning to encourage planting of Arjuna trees in place of the traditional Acacia or Eucalyptus trees. Tussar Food plants are available over an area of 9 lakh hectares. The Singhbhum and Santhalpargana regions are the main silk producing centres in the State. The State is promoting this activity through 28 pilot project centres situated in different areas. Each rearer can rear on an average 200 eggs or Disease Free Laying (DFLs) so the annual demand of commercial seed or egg is of 130 lakh. There are three types of seeds or eggs – Nucleus, Basic seed and Basic seed multiplied to commercial seed.

GOVERNMENT RESOURCES:

Tasar culture is a backbone for Tribal development, and the Government of India, through the Central Silk Board and different State Governments have initiated several developmental and welfare measures for the tribal welfare through it. Jharkhand's forest department is also planning to encourage planting of Arjuna trees in place of the traditional Acacia or Eucalyptus trees. Jharkhand Sericulture Development Institute (JSDI) and Jharkhand Silk Technical Development Institute (JSTDI) are being strengthened to give an impetus to this sector. During the year 2010-11, it is proposed to rear 2.35 lakh tasar nucleus DFLs, 16 lakh of tasar basic DFLs and 96 lakh of commercial DFLs through seed and commercial rearers in the State. It is proposed to be benefited 40,000 -50,000 Tasar farmers through Tasar seed production and its rearing during the year.

 

Steel Industry

 

PROFILE:

Steel Industry is a booming industry in the whole world. India’s economic growth is contingent upon the growth of the Indian steel industry. Consumption of steel is taken to be an indicator of economic development. While steel continues to have a stronghold in traditional sectors such as construction, housing and ground transportation, special steels are increasingly used in engineering industries such as power generation, petrochemicals and fertilisers. Indian Steel Industry is more than a century old. India has now emerged as the eighth largest producer of steel in the world with a production capacity of 35MT. Almost all varieties of steel is now produced in India. India has also emerged as a net exporter of steel which shows that Indian steel is being increasingly accepted in the global market. The growth of the steel industry in India is also dependant, to a large extent, on the level of consumption of steel in the domestic market. Steel consumption is significant in housing and infrastructure. In recent years the surge in housing industry of India has led to increase in the domestic demand for steel.

 

 

RESOURCES:

Jharkhand emerges as hub for steel companies. The state is endowed with deposits of Iron Ores of both, Hematite & Magnetite. The Hematite deposits are mainly located in the West Singhbhum District and have a resource base exceeding 3700 Million Tonnes. These have been explored only in pockets by large industry houses in their lease hold. There is a very good scope of enlarging this resource base by further exploration. The Magnetite Deposits are located in the East Singhbhum, Latehar & Palamu districts. They comprise lenticular ore bodies as well as Schist rocks with 80 to 36% magnetic. The exploration of these bodies is yet to be taken up. The existing steel mills are sourcing their iron ore (Hematite) from West Singhbhum. The Magnetite ore is being used in heavy media coal washeries & paints. Tata Steel's largest plant is located in Jamshedpur, Jharkhand, with its recent acquisitions; the company has become a multinational with operations in various countries. If the interest shown by all the companies, big and small, in Jharkhand's iron ore deposits translates into reality, the state will produce more than half the total steel in India. First Iron & steel factory  is located at Jamshedpur and Largest Steel plant in Asia is Bokaro steel plant.

 

GOVERNMENT POLICIES:

Under the new industrial policy, iron and steel has been made one of the high priority industries. Price and distribution controls have been removed  as well as foreign direct investment up to 100% (under automatic route) has been permitted.  The Trade Policy has also been liberalized and import and export of iron and steel is freely allowed with no quantitative restrictions on import of iron and steel items. Tariffs on various items of iron and steel have drastically come down since 1991-92 levels and the government is committed to bring them down to the international levels.  With the abolishing of price regulation of iron and steel in 92, the steel prices are market determined. The policy devises a multi-pronged strategy to achieve these targets with following focus areas; removal of supply constraints especially availability  of critical inputs like iron ore; improve cost competitiveness by expanding and strengthening the infrastructure in roads, railways, ports and power; increase exports; meet the additional capital requirements by mobilizing financial resources; promote investments by removing  procedural delays. In addition the policy also addresses challenges arising out of environmental concerns, human resource requirements, R&D, volatile steel prices and the secondary sector. 

 

Rural Industries: Project Opportunities in Jharkhand

 

PROFILE:

Rural industry is an important source of employment for workers shifting out of agriculture. The rural industry continues to play a significant role in the expansion ofemployment, improvement in productivity and earnings, and poverty reduction in many non-industrialized countries; this is particularly the case in India. This sector has immense export potential which needs to be exploited to earn foreign exchange. To give thrust, the government aims to provide benefits in the various areas such as handloom, handicrafts, khadi village industries, forest based industries etc.

RESOURCES:

Handloom is labour intensive cottage industry sector providing employment to around 1.5 lakh weavers throughout the State. Various incentives to the handloom weavers are being provided under Deendayal Hastkargha Protsahan Yojana, which aims attaking care of wide gamut of activities, such as basic inputs like looms and accessories, product development, infrastructure support, institutional support, training to weavers, supply of equipment and marketing support, both at micro and macro levels in an integrated and coordinated manner for an overall development of the sector and benefit to handloom weavers. Handicrafts of Jharkhand reflect the cultural heritage, customs and traditions of the State. The State manufactures handicrafts in cane and bamboo works, woodcarving, stoneware, brassware, Lac based handicraft items, paper mache, terracotta, etc. The State Government may set up a model suitable ‘Handicraft Village’ in each of the districts of the State for promoting the traditional arts and crafts of the villages by adopting the "One Tambon One Product" model of Thailand. Various forest produce available in the state are mahua seed, sal seed, shellac, bamboo, kendu leaf, harre, bahera, etc.

 

GOVERNMENT POLICIES:

Focus of the Rural Industrial Policy:-

1.       Providing ample employment opportunities through rural industries.

2.       Establishing rural industries and providing help on priority basis for skill enhancement, modern technology, and marketing especially for beneficiaries of scheduled caste, scheduled tribe, backward, and minority sections.

3.       Giving priority to participation of women in development of rural industries.

4.       Encouraging participation of private sector, non-governmental organizations, cooperative societies, and self help groups for development of rural industries.

5.       Implementing cluster approach.

6.       Value addition to the minor forest produce and medicinal herbs in the tribal areas of the state itself and passing on the benefits to the tribal population of the area.

7.       Connecting rural industries with E-commerce.

With the implementation of the Rural Industrial Policy, active participation of experienced craftsmen and industrialists in the field of handloom, handicraft, leather industry, other cottage industries and silk centers would be ensured for overall development of rural industries in the rural areas.

 

 

Tourism: Project Opportunities in Jharkhand

 

PROFILE:

Tourism is one of the fastest growing industries in the world. The number of tourists worldwide has been registering phenomenal growth and it is expected that this number would shortly touch 1.5 billion. Tourism contributes about 11% of the world work force and 10.2% of the global gross domestic products. The dynamic growth of this industry is evident from the fact that a new job is added to this sector every 2.5 second. Jharkhand is endowed with rich cultural heritage and bestowed liberally with bounties of nature. Various initiatives are being taken by the Government and other organizations to promote tourism here. Jharkhand is blessed with an exotic landscape: the rolling hills, beautiful plateaus, sparkling rivers, etc. that largely contribute towards tourism at Jharkhand. Besides, the national parks, wildlife sanctuaries, holy shrines and museums, etc. largely attracts tourists to come to Jharkhand.

RESOURCES:

Blessed with immense biodiversity, moderate climate, rich cultural and historical heritage, Jharkhand is fast emerging as an ultimate tourist destination in eastern India. Jharkhand Tourism Department is taking utmost initiative to promote tourism in Jharkhand. A good number of hotels run by Jharkhand Tourism and private hoteliers have come up at popular tourist spots, which cater to all segments of travellers. Several Jharkhand Tourism Information Centers have been opened up in various parts of the city. These information centers provide details about Jharkhand travel, hotels, tourist attractions, travel agencies, licensed Jharkhand tourism guides and other important travel tips to holiday makers. Some of the major tourist spots in Jharkhand that play a vital role in the tourism industry of Jharkhand are: Netarhat, Betla National Park, Baidyanath Dham so on. It is noteworthy in this context that Kanke Dam, Ranchi Hill, Tagore Hill, Hatia Dam, Dasham Falls, Jagannath mandir, Jonah Falls, Hoondru waterfalls, etc. are the projects under the Tourism Industry of Jharkhand that heavily contributes towards the economy of the State.

GOVERNMENT POLICIES:

Jharkhand has huge potential in tourism sector. The tourism potential of the state has not been exploited and at the same time tourist spots have not been highlighted at national and international level. Jharkhand government seems to be serious to promote tourism in the state. The State Government would set up a Jharkhand Tourism Development Board to facilitate enter departmental co-operation and coordination to promote Tourism in the State. This Board would be set up under the chairmanship of the Chief Minister of Jharkhand with the Tourism Minister as Vice-chairman and Principal Secretaries/Secretaries of other relevant departments as members. The Board would also have representatives of the Hotel Association, Travel Agents Association, Adventure Sports Operators Association, NGO's and other non-official members having outstanding contribution or expertise in the field of development and promotion of tourism industries. Financial assistance as grants-in-aid, etc would be provided (to this board). The Board would advise the Government to lay down the policy guidelines for the development and promotion of tourism industry in the State, to promote public-private partnership and public sector would undertake all steps to develop and promote tourism in the State.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 61 of 336 | Total 3355 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 61 335 336   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Clinker Grinding for Cement - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Cement is an inorganic, non-metallic substance with hydraulic binding properties, and is used as a bonding agent in building materials. It is a fine powder, usually gray in color that consists of a mixture of the hydraulic cement minerals to which one or more forms of calcium sulfate have been added. Mixed with water it forms a paste, which hardens due to formation of cement mineral hydrates. Cement is the binding agent in concrete, which is a combination of cement, mineral aggregates and water. Concrete is a key building material for a variety of applications. In the manufacture of Portland cement, clinker is lumps or nodules, usually 3-25 mm in diameter, produced by sintering limestone and alumino-silicate during the cement kiln stage. Clinker is the main ingredient in cement. These hardened granules are obtained by firing a mixture of approximately 80% limestone and 20% clay to a high temperature. The most commonly used cement in the world is Portland cement, which is formed at high temperatures that chemically combine the ingredients into new components, including calcium silicates and calcium aluminates. When the cement clinkers are ground with approximately 5% gypsum, they form Portland cement. These compounds allow cement to set when combined with water and to form strong bonds that can withstand pressure, water immersion, and other elements. Cement Clinker is an intermediate product used in manufacture of Portland and Blended Cements in Cement. Portland cement clinker is ground (usually with the addition of a little gypsum, that is, calcium sulfate dehydrate) to a fine powder and used as the binder in many cement products. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • A C C Ltd. • Almora Magnesite Ltd. • Ambuja Cement Eastern Ltd. • Ambuja Cement Rajasthan Ltd. • Ambuja Cements Ltd. • Anjani Portland Cement Ltd. • Barak Valley Cements Ltd. • Bheema Cements Ltd. • Bhilai Jaypee Cement Ltd. • Birla Corporation Ltd. • Cement Manufacturing Co. Ltd. • Century Textiles & Inds. Ltd. • Chettinad Cement Corpn. Ltd. • Dalmia Cement (Bharat) Ltd. • Dhar Cement Ltd. • Gangotri Cement Ltd. • Greygold Cements Ltd. • Gujarat High Tech Inds. Ltd. • Gujarat Sidhee Cement Ltd. • Hemadri Cements Ltd. • K C P Ltd. • Keerthi Industries Ltd. • Khalari Cements Ltd. • Lafarge India Pvt. Ltd. • Malabar Cements Ltd. • Mangalam Cement Ltd. • Meghalaya Cement Ltd. • My Home Inds. Ltd. • N C L Industries Ltd. • Namo Cements Ltd. • Narmada Cement Co. Ltd. • C L India Ltd. • Orient Cement Ltd. • P R Cements Ltd. • Ramco Cements Ltd. • Ramco Industries Ltd. • Rashmi Cement Ltd. • Rishi Cement Co. Ltd. • Sanghi Industries Ltd. • Saurashtra Cement Ltd. • Shaktiman Cements Ltd. • Shiva Cement Ltd. • Shree Cement Ltd. • Shree Digvijay Cement Co. Ltd. • Shri Hariganga Cement Ltd. • Snhehadhara Industries Ltd. • Sparta Cements & Infra Ltd. • Sri Vishnu Cement Ltd. • Srichakra Cements Ltd. • Tata Chemicals Ltd. • Trinetra Cement Ltd. • Ultratech Cement Ltd. • Vinay Cements Ltd. • Virgo Cements Ltd. • Visaka Cement Industry Ltd. • Zuari Cement Ltd.
Plant capacity: Clinker for Cement: 100 MT/DayPlant & machinery: Rs 436 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 907 Lakhs
Return: 23.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Bare Conductors - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A wire or combination or wires not insulated from one another, suitable for carrying a single electric current is called conductor. The term conductor is not to include a combination of conductors insulated from one another, which would be suitable for carrying several different electric currents. Aluminium is a metal characterized by high resistance to corrosion, good electrical and thermal conductivity, and a density which is about one-third or less that of steel, copper, or nickel. Aluminium can be used as a power conductor, or for wire and cable shielding. Aluminium provides a lower weight to current-carrying ratio compared to copper. Aluminium has a lower tensile strength than copper, but approaches that of copper for the equivalent ampacity. When terminated with appropriate plating, hardware and processes as stipulated by the governing standards, Aluminium bussing, wiring and terminations prove to be as reliable as copper. Finally, the choice of Aluminium conductors can provide a significant cost savings. Aluminium and aluminium alloy conductors are the preferred and dominant conductors in several areas of power distribution. The major areas dominated by aluminium and aluminium alloy conductors are non-insulated overhead power transmission, insulated overhead power transmission and non overhead power distribution. Aluminium and aluminium alloy conductors offer good conductivity, light weight, excellent resistance to corrosion, good bending properties, greater tensile strength than copper and excellent compatibility with most common insulation used by the wire and cable industry. During 2010-2015, the Indian equipment manufacturing will grow at 5.5 times the growth rate of global electronic equipment production. Therefore, it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Apar Industries Ltd. • Bagade India Engg. Ltd. • Bindawala Cables & Conductors Ltd. • Deepak Cables (India) Ltd. • E M C Ltd. • Eri-Tech Ltd. • Galada Power & Telecommunication Ltd. • Hirakud Industrial Works Ltd. • Jaipur Metals & Electricals Ltd. • Lunkad Aluminium Ltd. • Maharashtra Metal Powders Ltd. • Murarka Cables & Conductors Ltd. • Omega Cables Ltd. • Opal Industries Ltd. • Shashi Cables Ltd. • Smita Conductors Pvt. Ltd. • Traco Cable Co. Ltd. • Vidarbha Winding Wires Ltd.
Plant capacity: • All Aluminium Alloy Conductor: 10 MT/Day, Aluminium Conductor Steel Reinforced : 10 MT/DayPlant & machinery: Rs 580 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1141 Lakhs
Return: 27.36%Break even: 56.24%
Add to Inquiry Add to Inquiry Basket

Cement Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Cement is a material with adhesive and cohesive properties which make it capable of bonding minerals fragments into a compact whole. It can be defined as any substance, which can join unite two or more pieces of some other substance together to form a unit mass. It is an inorganic, non-metallic substance with hydraulic binding properties, and is used as a bonding agent in building materials. It is a fine powder, usually gray in color that consists of a mixture of the hydraulic cement minerals to which one or more forms of calcium sulfate have been added. Mixed with water it forms a paste, which hardens due to formation of cement mineral hydrates. Cement is the binding agent in concrete, which is a combination of cement, mineral aggregates and water. Concrete is a key building material for a variety of applications. Cement, as used in construction industries, which when mixed with water and allowed to set and harden can join different components or members together to give a mechanically strong structure. Thus cement can be used as bonding material for bricks or for bonding solid particles of different sizes (rubber masonry) to form a monolith. The most common use for cement is in the production of concrete. Concrete is a composite material consisting of aggregate (gravel and sand), cement, and water. As a construction material, concrete can be cast in almost any shape desired, and once hardened, can become a structural (load bearing) element. Indian cement industry, a leading manufacturing sub-sector in India, entered a new era after the partial decontrol in 1982 and near total free market in 1989, ahead of the dawn of the liberalisation era in the country. The industry was totally delicensed in 1991 under the Industries Development and Regulation Act. India is the second largest producer of cement in the world after China. It is followed by Japan and the USA. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • A C C Ltd. • Adani Cements Ltd. • Ambuja Cement Eastern Ltd. • Ambuja Cement Rajasthan Ltd. • Ambuja Cements Ltd. • Bharathi Cement Corpn. Pvt. Ltd. • Bhilai Jaypee Cement Ltd. • Birla Corporation Ltd. • Burnpur Cement Ltd. • Calcom Cement India Ltd. • Cement Corpn. Of India Ltd. • D L F Cement Ltd. • Eswar Cements Pvt. Ltd. • Garden Cements Ltd. • Gujarat High Tech Inds. Ltd. • High-Tech Lime Products Ltd. • I P I-S P Cement Co. Ltd. • India Cements Ltd. • J K Lakshmi Cement Ltd. • Jagadamba Cements Ltd. • Jaipur Udyog Ltd. • Makers Development Services Pvt. Ltd. • Malabar Cements Ltd. • Megha Technical & Engineers Pvt. Ltd. • Meghalaya Cement Ltd. • N C L Industries Ltd. • Namo Cements Ltd. • Prism Cement Ltd. • Raasi Cement Ltd. • Radhakishan Cement Ltd. • Rain Cements Ltd. • Samruddhi Cement Ltd. • Sanghi Industries Ltd. • Shree Digvijay Cement Co. Ltd. • Someswara Cements & Chemicals Ltd. • Sorabh Cement Ltd. • Trinetra Cement Ltd. • Ultratech Cement Ltd. • Uttar Pradesh State Cement Corpn. Ltd. • Varun Cements Ltd. • Visaka Cement Industry Ltd. • Vishwakarma Cements Ltd. • Zuari Cement Ltd.
Plant capacity: 200 MT/DayPlant & machinery: Rs 755 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1254 Lakhs
Return: 17.22%Break even: 61.78%
Add to Inquiry Add to Inquiry Basket

Leather Bags and Wallets - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Leather is considered as a symbol of fashion, uniqueness, trend and styles. The demand for quality leather products as well as accessories never ceases among the consumers. Individuals that are style sensitive and elegant always want to enhance their overall appearance by preferring quality leather products. Use of leather goods is increasing day by day. Now-a-days fancy leather goods are being used by the people of even remotest area of country, because lifestyle has been changing very fast. Fancy leather products are durable and beautiful to look at in comparison to other similar products. People use shopping bags to carry things to home, which they purchase from market. Different material like cloth, nylon, plastic etc are used for manufacturing of bags. But they are less durable and lack aesthetic appeal. Leather can be used for manufacturing high quality shopping bags to carry grocery, cloth, cosmetics and other such similar items. Most of the women used leather hand bags in India. The raw material availability is high in Tribal areas of AP and Orissa state. The industry depends on taning industry. The Indian leather industry is the 8th largest foreign exchange earner for the country. The product variation covers: (a) semi and finished leather, (b) footwear and footwear components, (c) garments for ladies and gents, (d) handbags for ladies and gents, (e) wallets, diaries and cardholders, (f) gloves and fashion accessories, (g) tableware, (h) upholstery (for houses, offices and vehicles), and (i) luggage and portfolio bags. Handbags, footwear and leather garments have the largest export growth potential in the leather sector, according to a study undertaken by the Export-Import Bank of India. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • A V Thomas Exports Ltd. • Beekay Niryat Ltd. • Cheviot International Ltd. • Crew B O S Products Ltd. • Euresian Equipments & Chemicals Ltd. • Gujarat B D Luggage Ltd. • Indo Korea Exports Ltd. • Sanyo Impex Ltd. • V I P Industries Ltd. Cost Estimation Capacity • Business Card Case : 100 Pcs/Day • Accordion Wallet : 100 Pcs/Day • Billfold Wallet Type 01 : 100 Pcs/Day • Billfold Wallet Type 02 : 100 Pcs/Day • Billfold Wallet Type 03 : 100 Pcs/Day • Passport Wallet : 100 Pcs/Day • Money Clutch : 100 Pcs/Day • Wash Bags : 100 Pcs/Day • City Bags : 100 Pcs/Day • Laptop Backpack : 100 Pcs/Day • Business Document Briefcase : 100 Pcs/Day • Business Laptop Briefcase : 100 Pcs/Day • Business Triple Compartment Bags : 100 Pcs/Day • Weekender Bags : 100 Pcs/Day • Wheeled Luggage: 100 Pcs/Day
Plant capacity: -Plant & machinery: Rs 28 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 264 Lakhs
Return: 26.37%Break even: 58.01%
Add to Inquiry Add to Inquiry Basket

Water Treatment Chemicals (Antiscalants and Membrane Cleaners) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

There has been a dramatic increase in the number of reverse osmosis and nano-filtration plant over the past ten years. There has also been a proliferation in the variety of feed sources used, including seawater, surface waters and, increasingly, effluents of varying qualities. Not surprisingly, therefore, is the parallel increase in the degree of scaling and fouling, resulting in the need for not only novel preventative antiscalant products in the field, but also new and improved cleaners where deposition has occurred. An essential part of the ability to correctly select and apply the most appropriate products lies in the development of laboratory analysis and predictive tools. Fouling potential is an inherent characteristic of membrane module design. The high membrane packing density required for good production rates results in low voidage for feed water flow. However, this need not result in detrimental performance. Fouling has been widely documented and researched since the first commercial use of membrane separations. It is important that this subject is addressed because membrane replacement is a considerable expense in the operation of an RO plant. In the case of large municipal and industrial systems, this cost can be prohibitive. Pre-treatment systems for RO plants are designed to produce a feedwater with a reduced fouling potential by removing potential fouling species prior to membrane treatment. Common foulants include: Calcium carbonate and calcium sulphate scales, Organic matter, Iron, Colloidal material, Bio-film and microorganisms, Silica, Natural humic and fulvic acids. Fumaric Acid Polymers are used as Antiscalants. The synthesis of the fumaric acid polymers follows a novel process that avoids the insolubility and low reactivity of fumaric acid in free radical reactions and that produces the polymer in high yield.
Plant capacity: Capacity Antiscalants: 5MT/Day, Membrane Cleaners: 5 MT/DayPlant & machinery: Rs 88 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 613 Lakhs
Return: 27.82%Break even: 63.96%
Add to Inquiry Add to Inquiry Basket

Restaurant with Microbrewery - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project

A restaurant is simply a place to have food outside your home. It is smaller in size than a hotel as it does not have accommodation facilities. It is an establishment that serves the customers with prepared food and beverages to order, to be consumed on the premises. The term covers a multiplicity of venues and a diversity of styles of cuisine. The one and only feature of a restaurant is the kind of food and/or beverages it serves to its customers. There are all sorts of restaurants in all cities of the world ranging from budget to very expensive ones where international cuisine is served and the ambience is great. Some restaurants also serve alcoholic drinks for which they obtain a license from the administration. Some are specialized restaurants where a particular cuisine is served such as Chinese, Italian, Thai, Japanese, and so on. Restaurants range from unpretentious lunching or dining places catering to people working nearby, with simple food and fixed menu served in simple settings at low prices, to expensive establishments serving expensive speciality food and wines in a formal setting. In the former case, customers usually wear casual clothing. In the latter case, depending on culture and local traditions, customers might wear semi-casual, semi-formal, or even in rare cases formal wear. Typically, customers sit at tables, their orders are taken by a waiter, who brings the food when it is ready, and the customers pay the bill before leaving. INDIA is one of the world’s largest producers as well as consumers of food. Changing food consumption patterns of India’s population is expected to not only increase consumption volume in absolute terms to US$230 billion but also shift people’s diet qualitatively towards richer, processed foods, which will force increased commodity requirements. The industry players say that they are observing a healthy business growth in the Millennium City and there are areas where the business has observed an exceptional response. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • A G S Hotels & Resorts Pvt. Ltd. • Au Bon Pain Cafe India Ltd. • Dodsal Enterprises Pvt. Ltd. • Forbes Facility Services Pvt. Ltd. • Green Dot Restaurants Pvt. Ltd. • Hardcastle Restaurants Pvt. Ltd. • Koti Resorts Ltd. • Lakeview Clubs Ltd. • Market City Developers Pvt. Ltd. • Mayur Leather Products Ltd. • Mount Shivalik Inds. Ltd. • R T C Restaurants (India) Ltd. • Speciality Restaurants Ltd. • Wah Restaurants Pvt. Ltd.
Plant capacity: Restaurant (Veg. - Non-Veg.): 150 Nos/Day, Beer: 330 Pitchers/Day, Alcohol : 100 Nos/Day, Fresh Fruit Juice: 500 Nos/DayPlant & machinery: Rs 189 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 392 Lakhs
Return: 27.28%Break even: 63.08%
Add to Inquiry Add to Inquiry Basket

Cattle Feed - Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Cost of Project

The principal feed resources for animal consumption in the country are crop residues like straws of wheat, rice and other cereals and stovers, which are very poor in feed value. Even these are in short supply. These are supplemented to some extent by relatively better quality fodders like cultivated leguminous and non-leguminous fodder grasses and concentrates. The latter are formulated largely from agro-industrial by-product and forest wastes and small quantities of low-grade cereals with the present stock of feed and fodder resources available in the country, it is impossible to meet the nutrient requirements of even the present day low-producing cattle and buffaloes. Such a situation is bound to aggravate difficulties in the feeding of better producing livestock such as cross bred lows in exploiting their full genetic potentiality for early growth, better reproduction and higher milk production. Foods are the basic need of every one, similarly feed for cattle’s is also very important and necessary as well. Without this, no one can live as well as good nutritive meal increase the productivity as well as the growth of an animal. Thus, the requirement of good cattle feed is always exists and it will further increase with the increase in population of cattle’s. Therefore, it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Agro Tech India Ltd. • Amrit Feeds Ltd. • Anirudh Foods Ltd. • Annam Feeds Ltd. • Baramati Agro Ltd. • Gajanan Extraction Ltd. • Goldmohur Foods & Feeds Ltd. • Graintec India Ltd. • Hanuman Minor Oils Ltd. • Hatsun Agro Products Ltd. • Indian Potash Ltd. • Khandesh Extraction Ltd. • Kumar Food Inds. Ltd. • Kwality Feeds Ltd. • Kwality Ltd. • Lakshmi Energy & Foods Ltd. • Maheshwari Solvent Extraction Ltd. • Piccadily Agro Inds. Ltd. • Puri Oil Mills Ltd. • S K M Animal Feeds & Foods (India) Ltd. • Sakthi Beverages Ltd. • Schreiber Dynamix Dairies Ltd. • Sree Tulasi Solvent Extractions Ltd. • Vegepro Foods & Feeds Ltd. • Vimal Dairy Ltd.
Plant capacity: 100 MT/DayPlant & machinery: Rs 277 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 869 Lakhs
Return: 25.22%Break even: 48.23%
Add to Inquiry Add to Inquiry Basket

Aluminium Collapsible Tubes (Printed) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

A collapsible tube is defined as a cylinder of pliable metal that can be sealed in such a manner that its contents, although readily discharged in any desired quantity, are protected from contact with air or moisture. Products so packaged must flow under pressure low enough not to damage the tube. Collapsible tubes are widely used as handy flexible packages for pastes and semi-liquids. As the tube is flattened out to expel its contents, the capacity of the tube is proportionately reduced without the introduction of air and the material in the tube does not suffer any deterioration. These are fabricated readily, and are strong enough to withstand processing, they are light in weight, easy to handle, and fairly cheap. They can be handled on high speed machines. This type of cans are properly sealed after filling the measured quantity, to keep the customer's faith on sealed material sealing also prevents dusting and other bad materials to mix with the product. Collapsible tubes are made from aluminium, tin coated lead, or lead tin alloy by cold extrusion. They consist of three parts, the main tube, a shoulder to one end of which a screened nozzle with orifice is fitted, and a molded cap to close the orifice, sometimes application of various design are attached to the nozzle with the help of mechanical or hand operated filling machines, the end is sealed by folding and crimping. Collapsible tubes were initially introduced for packing artists oil color. However, now its use has spread for packing a wide variety of products. These tubes are used for filling tooth paste, shaving creams, ointment and inks, etc. It is hygienic, non-toxic and non-absorbent and has a high heat transfer rate. Consequently, aluminium is an ideal tubing material for several process industry applications. Aluminium tubes look attractive in its natural state and its appearance can be further enhanced by a variety of finishes. In the packaging sector, aluminium is used in foils, cans, collapsible tubes and bottle caps. Hence, globally, the growth of the packaging industry hinges on growth in sectors like foods, beverages, and medicines. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Perfect Containers Pvt. Ltd. • Oriental Containers Ltd. • P Chhotalal Group • Deep Packaging Pvt. Ltd • Collapsible Tube Corporation • Gulati Extrusions Pvt. Ltd • Almin Extrusion • Patel Extrusion Group
Plant capacity: Aluminium Collapsible Tubes (Printed): 2,00,000 Nos/DayPlant & machinery: Rs 608 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1158 Lakhs
Return: 28.40%Break even: 41.58%
Add to Inquiry Add to Inquiry Basket

Neem Oil - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Azadirachta indica (Neem) tree belongs to the Meliaceae family. It is a multipurpose and an evergreen tree, 12–18 m tall, which can grow in almost all kinds of soil including clay, saline, alkaline, dry, stony, shallow soils and even on solid having high calcareous soil. It is native to India, Pakistan, Sri Lanka, Burma, Malaya, Indonesia, Japan, and the tropical regions of Australia. It thrives well in arid and semi-arid climate with maximum shade temperature as high as 49°C and the rainfall is as low as 250 mm. It can be raised by directly sowing its seed or by transplanting nursery-raised seedlings in monsoon rains. It reaches maximum productivity after 15 years and has a life span of 150–200 years. Planting is usually done at a density of 400 plants per hectare. The productivity of Neem oil mainly varies from 2 to 4 t/ha/yr and a mature Neem tree produces 30–50 kg fruit. The seed of the fruit contains 20–30 wt% oil and kernels contain 40–50% of an acrid green to brown colored oil. Neem is an omnipotent tree and a sacred gift of nature. Neem tree is mainly cultivated in the Indian subcontinent. Neem is a member of the mahogany family, Meliaceae. Today it is known by the botanical name Azadirachta indica (A. indica) A. Juss. Neem has been used extensively by humankind to treat various ailments before the availability of written records which recorded the beginning of history. Since prehistoric times, neem has been used by humankind. The internal medicinal uses of Neem include malaria, tuberculosis, rheumatism, arthritis, jaundice and intestinal worms as well as skin diseases. It also has alternative (increases vitality) properties. The oil is NOT normally taken internally - but as a decoction made from the leaves. The extract of Neem leaves has also demonstrated significant anti-diabetic potential. Neem oil is acried, yellow, bitter in taste and has a disagreeable garlic like odour. It is best used in pharmaceutical and pesticides industry. It is used as antifeedant, repellant, insecticide and growth disruptor. Refined neem oil is used for manufacture of technical oleic acid, stearic acid and production of quality soaps, shampoos, hand and body lotions and creams. It is used to treat skin diseases like scrofula indolent, ulcer, sores and ringworms. Neem is used externally for ringworm, eczema, psoriasis, lice, fungal infection as well as for painful joints and muscles. The cosmetic use of Neem oil includes the fighting of acne and pimples as well as improving skin elasticity. As a whole it is a good project for entrepreneurs to invest. ? Few Indian Major Players are as under • Agro Extracts Ltd. • J S P Oils & Fats Ltd. • K G N Agro Internationals Ltd. • Morinda Overseas Inds. Ltd. • Mother Dairy Food Processing Ltd. • Vrundavan Agro Inds. Ltd.
Plant capacity: Neem Oil : 5 MT/Day, Neem Cake as By Product : 42 MT/DayPlant & machinery: Rs 75 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 320 Lakhs
Return: 24.74%Break even: 62.91%
Add to Inquiry Add to Inquiry Basket

Precipitated Calcium Carbonate - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Sizing Precipitated Calcium Carbonate (PCC)—also known as purified, refined or synthetic calcium carbonate. It has the same chemical formula as other types of calcium carbonate, such as limestone, marble and chalk: CaCO3. The calcium, carbon and oxygen atoms can arrange themselves in three different ways, to form three different calcium carbonate minerals. The most common arrangement for both precipitated and ground calcium carbonates is the hexagonal form known as calcite. Precipitated calcium carbonate (PCC), a manufactured form of calcium carbonate, is made by first hydrating high-calcium quicklime, and then reacting the resulting slurry or "milk-of lime" with carbon dioxide. The resulting product is extremely white and has a uniformly small particle size. It has numerous uses, most notably in the paper industry. With the trend in papermaking toward using the alkaline over the acid process, PCC is being used increasingly as a filler and coating pigment for premium quality paper. The trend is to produce PCC in slurry form at satellite plants located near the paper mills, using commercial quicklime, although it is also produced and sold commercially. PCC is used to enhance the brightness, color, smoothness, and bulk of the paper, replacing more expensive paper pulp. Approximately 75% of worldwide PCC production is used for this purpose. According to GIA, Global market for Calcium Carbonate is projected to reach 94 million tons by 2018, driven by the rising consumption in paper and plastic industries and the growing demand for PCC and GCC in Asia-Pacific, Latin America, and the Middle East. Calcium Carbonate (CaCO3) is an inorganic mineral that finds extensive use as functional and commercial filler in plastic, paper, rubber, coatings, light chemicals, and architectural materials, among others. Growth in the Precipitated Calcium Carbonate (PCC) market would be driven by the increasing number of paper mills and rising demand from plastics sector. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Citurgia Biochemicals Ltd. • Dewan Rubber Inds. Ltd. • Fimakem India Ltd. • Genus Prime Infra Ltd. • Gulshan Polyols Ltd. • Gulshan Sugars & Chemicals Ltd. • Lime Chemicals Ltd. • Niraj Petrochemicals Ltd. • Samana Plastic Ltd. • Searsole Chemicals Ltd. • Shyam Textiles Ltd. • Thirani Chemicals Ltd. • U P Lime-Chem Ltd.
Plant capacity: 25 MT/DayPlant & machinery: Rs 715 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1138 Lakhs
Return: 20.65%Break even: 52.58%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 61 of 336 | Total 3355 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 61 335 336   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top