Google Search

Search

Already a Member ?

Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 78 of 295 | Total 2950 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 78 294 295   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Production of Insulators (HT & LT)

An electrical insulator is a material whose internal electric charges do not flow freely; very little electric current will flow through it under the influence of an electric field. This contrasts with other materials, semiconductors and conductors, which conduct electric current more easily. The property that distinguishes an insulator is its resistivity; insulators have higher resistivity than semiconductors or conductors. Insulators are used in electrical equipment to support and separate electrical conductors without allowing current through themselves. An insulating material used in bulk to wrap electrical cables or other equipment is called insulation. The term insulator is also used more specifically to refer to insulating supports used to attach electric power distribution or transmission lines to utility poles and transmission towers. They support the weight of the suspended wires without allowing the current to flow through the tower to ground. Few Indian Major Players are as under: • Aditya Birla Insulators • Spark Insulators Pvt Ltd • Prime Insulators Pvt. Ltd • Cji Porcelain Pvt Ltd • Shreeji Power & Insulators Pvt. Ltd Market Outlook World is experiencing a tremendous expansion of industrial and real estate sectors and accompanied by a massive increase in the need for electric power energy due to the essential role of the electric power in the development and growth in all areas of life. This huge demand of the electrical power bodes market demand for large investments in the field of electric power and its support services industry. Global demand for insulation is expected to rise 3.7 percent per year to 26.0 billion square meters of R-1 value in 2020. Developing countries are expected to account for the majority of insulation demand gains, with rising building construction activity and industrial output driving growth. Electric insulators are essential components of transmission and distribution (T&D) lines. They play a crucial role in preventing the flow of electric current down to the earth through supporting points between the transmission line and tower. There are three types of electric insulators based on the materials used for their production — ceramic, glass, and composite. The global electric insulator market to grow at a CAGR of 6.23% during the period 2016-2020. Global electrical insulation materials market is expected to witness a steady growth over the coming year from 2017 to 2026 as the demand for electrical insulation materials is expected to be driven primarily by the growth in demand from construction industry. Tags Manufacturing Process of Insulators, Insulator Manufacturing Process, Insulators Production Process, Manufacturing Process of Insulator, Insulator Making, Insulator Manufacture, Method for Manufacturing Insulator, Process of Manufacturing Insulators, Process for Producing Insulators, Insulator Manufacturing, Insulator (HT & LT) Manufacturing Plant, Large Scale Production of Insulator, Production and Processing of Insulator, Insulator Manufacturing Industry, Insulators Manufacture in India, Insulators Production, Production of Insulator (HT & LT), Manufacturing of Insulator, Manufacture of Insulator, Insulator (HT & LT) Manufacturing Unit, Production Plant of Insulator, Insulator Manufacturing Business, Production Process of Insulator, Manufacturing Plant of Insulator (HT & LT), Industrial Production of Insulator, Business Plan for Insulator Manufacturing, Process for Production of Insulator, How to Prepare Insulator (HT & LT), Insulator Manufacturing Project Report, Method for Manufacturing of Insulator (HT & LT), Method for Production of Insulator, Production Plan for Insulator (HT & LT), Small Scale Insulator Manufacturing Business Ideas, Preparation Method for Insulator, Method of Making Insulator, Profitable Business Opportunity in Industrial Production, Insulator (HT & LT) Production Line, Insulator Production Business Plan, Planning for Insulator (HT & LT) Producing, Insulator Making Plant, Most Profitable Insulator (HT & LT) Processing Business Ideas, How to Start Insulator (HT & LT) Manufacturing Business, Insulator (HT & LT) Making Industry, How to Produce Insulator (HT & LT), Insulator(HT & LT) Manufacturing Project Ideas, Projects on Small Scale Industries, Small Scale Industries Projects Ideas, Insulator Manufacturing Based Small Scale Industries Projects, Project Profile on Small Scale Industries, How to Start Insulator Manufacturing Industry in India, Insulator (HT & LT)Manufacturing Projects, New Project Profile on Insulator Manufacturing Industries, Project Report on Insulator (HT & LT)Manufacturing Industry, Detailed Project Report on Insulator Production, Project Report on Insulator Production, Pre-Investment Feasibility Study on Insulator(HT & LT) Manufacturing, Techno-Economic Feasibility Study on Insulator Manufacturing, Feasibility Report on Insulator Manufacturing(HT & LT), Free Project Profile on Insulator Production, Project Profile on Insulator Manufacturing, Download Free Project Profile on Insulator Production, Industrial Project Report, Project Consultant, Project Consultancy, Npcs, Niir, Process Technology Books, Business Consultancy, Business Consultant, Project Identification and Selection, Preparation of Project Profiles, Startup, Business Guidance, Business Guidance to Clients, Startup Project for Insulator Manufacturing, Startup Project, Startup Ideas, Project for Startups, Startup Project Plan, Business Start-Up, Business Plan for Startup Business, Great Opportunity for Startup, Small Start-Up Business Project, Project Report for Bank Loan, Project Report for Bank Finance, Project Report Format for Bank Loan in Excel, Excel Format of Project Report and CMA Data, Project Report Bank Loan Excel, Detailed Project Plan Reports
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Iodised Salt

Iodised Salt Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Production Schedule, Working Capital Requirement, Plant Layout, Process Flow Sheet, Cost of Project, Projected Balance Sheets, Profitability Ratios, Break Even Analysis Iodised salt (also spelled iodized salt) is table salt mixed with a minute amount of various salts of the element iodine. The ingestion of iodine prevents iodine deficiency. Worldwide, iodine deficiency affects about two billion people and is the leading preventable cause of intellectual and developmental disabilities. Deficiency also causes thyroid gland problems, including "endemic goitre". In many countries, iodine deficiency is a major public health problem that can be cheaply addressed by purposely adding small amounts of iodine to the sodium chloride salt. Salt is existent in all animal and vegetable life and is coeval with life itself. It is a basic element in food of any living being. Salt as a chemical is of significant importance. Salt was the name originally given to the residue left by evaporation of sea water. Afterwards the name was employed to include all substances held in solution in sea water. Chemists ultimately extended the name to cover all combinations of an acid and a base. Sodium chloride (NaCl) now called common salt, is an example of the simplest type of chemical salt. Sodium chloride is an essential constituent of the body fluids and is responsible for a number of vital functions in the body. Few Indian Major Players are as under: Ankur Chemfood Ltd. G Das & Co. Pvt. Ltd. Hindustan Salts Ltd. Nirma Ltd. Rasoi Ltd. Saboo Sodium Chloro Ltd. Sahayamatha Salt Refinery Ltd. Sambhar Salts Ltd. Super Salts Pvt. Ltd. Tamil Nadu Salt Corpn. Ltd. Tata Chemicals Ltd. Tuticorin Salt & Marine Chemicals Ltd. Vaibhav Enterprises Ltd. Market Outlook India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tones. The growth and achievement of Salt Industry over the last 60 years has been spectacular. Global demand for salt is projected to climb 2.9 percent annually through 2015 to 327 million metric tons, valued at $13.4 billion. Increased salt consumption in most parts of the world will more than offset expected contractions of demand in Western Europe and Japan. India follows closely behind the US by exporting $129,097,000 worth of salt every year and like the US is one of the top producers of salt in the world. In India, Gujarat, Tamil Nadu and Rajasthan contribute to about 96% of the Country’s salt production. Gujarat contributes 75% to the total production, followed by Tamil Nadu (11 %) and Rajasthan (10 %). About 62% of the total production is from large salt producers, 28% is contributed by small scale producers and rest by medium scale producers. Tags Iodized Salt in India, Iodized Salt Manufacture in India, Salt Industry in India, Iodized Salt Production, Small Scale Manufacturing of Iodized Salt, Iodized Salt Plant, Salt Production, Salt Production in India, Iodized Salt Manufacturing Business Plan, India Salt Industry, Small Industry Set Up Iodised Salt, Production of Iodized Salt, Salt and Salt Production Process, Salt in Industry in India, Salt Production and Iodization, Salt Iodization in India, Iodized Salt Manufacturing Business Plan, Process of Iodiasation of Salt, Manufacture of Iodised Salt Project, Manufacture of Iodised Salt, Iodized Salt Making Machine, Small Scale Iodized Salt Production Plant, Salt Processing Plant, Small Scale Salt Processing Plant, Iodized Salt Production Business, Iodized Salt Project Report, Salt Production and Processing, Large-Scale Production of Salt, Process of Iodising Salt, Methods of Production of Iodized Salt, Process for Producing Iodized Salt, Salt Manufacturing Process, Salt Making Machine, Salt Manufacturing Plant, Salt Iodation Methods, Salt Production Plant, Small Scale Salt Iodization Plant, Salt Production Project Ideas, Projects on Small Scale Industries, Small Scale Industries Projects Ideas, Iodized Salt Production Based Small Scale Industries Projects, Project Profile on Small Scale Industries, How to Start Iodized Salt Production Industry in India, Iodized Salt Production Projects, New Project Profile on Salt Production Industries, Project Report on Iodized Salt Production Industry, Detailed Project Report on Iodized Salt Production, Project Report on Iodized Salt Production, Pre-Investment Feasibility Study on Iodized Salt Production, Techno-Economic Feasibility Study on Salt Production, Feasibility Report on Iodized Salt Production, Free Project Profile on Iodized Salt Production, Project Profile on Iodized Salt Production, Download Free Project Profile on Salt Production, Industrial Project Report, Project Consultant, Project Consultancy, Npcs, Niir, Process Technology Books, Business Consultancy, Business Consultant, Project Identification and Selection, Preparation of Project Profiles, Startup, Business Guidance, Business Guidance to Clients, Startup Project for Salt Production, Startup Project, Startup Ideas, Project for Startups, Startup Project Plan, Business Start-Up, Business Plan for Startup Business, Great Opportunity for Startup, Small Start-Up Business Project, Project Report for Bank Loan, Project Report for Bank Finance, Project Report Format for Bank Loan in Excel, Excel Format of Project Report and CMA Data, Project Report Bank Loan Excel, Detailed Project Plan Reports, Edible Salt, White Salt Production, edible salt manufacturing process, Kitchen Salt industry, Food processing industry
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Manufacturing Business of Medical Disposables

Manufacturing Business of Medical Disposables. IV Cannula. Cannula Manufacturing System The IV cannula itself is a small flexible tube that surrounds a trocar needle used to puncture the skin. The cannula has a fitting that can be connected to more tubing or a port for medication administration once the needle has been removed. Aside from aiding in hydration and administering medication, a cannula can also be used to obtain blood samples for testing. Intravenous (IV) cannulation is a technique in which a cannula is placed inside a vein to provide venous access. Venous access allows sampling of blood, as well as administration of fluids, medications, parenteral nutrition, chemotherapy, and blood products. A cannula is a tube that can be inserted into the body, often for the delivery or removal of fluid or for the gathering of data. In simple terms, a cannula can surround the inner or outer surfaces of a trocar needle thus extending the effective needle length by at least half the length of the original needle. It is also called an intravenous IV cannula. Its size mainly ranges from 14 to 24 gauge. Different-sized cannula have different colours as coded. ‘Cannula’ and ‘catheter’ both mean exactly the same thing– a flexible tube inserted into the body to administer or withdraw fluids or to keep another tube patent. Intravenous cannulation is a technique in which a cannula is placed inside a vein to provide venous access. Venous access allows sampling of blood as well as administration of fluids, medications, parental nutrition, chemotherapy, and blood products. In general, the smallest gauge of catheter should be selected for the prescribed therapy to prevent damage to the vessel intima and ensure adequate blood flow around the catheter, which reduces the risk of phlebitis. In an emergency situation or when patients are expected to require large volumes infused over a short period of time, the largest gauge and shortest catheter that is likely to fit the chosen vein should be used. There are four types of IV Catheter: Peripheral Catheter, Midline Peripheral Catheter, and Peripherally Inserted Central Catheter & Central Venous Catheter. Uses and Applications A venous cannula is inserted into a vein, primarily for the administration of intravenous fluids, obtaining blood samples and administering medicines. An arterial cannula is inserted into an artery, commonly the radial artery, and is used during major operations and in critical care areas to measure beat-to-beat blood pressure and to draw repeated blood samples. IV Cannula has veterinary use, nasal or oral use too. Cannula can also be used for piercing. The common uses are rapid transfusion of blood, transfusion of IV drugs. Paediatric patients or adults with small veins undergoing long term medication or blood transfusion are subjected to IV Cannula. It is also used on oncology patients undergoing Chemotherapy. Few Indian Major Players are as under:- • La Medical Devices Ltd. • Lifeline Injects Ltd. • Sangam Health Care Products Ltd. • Span Medicals Ltd. • Surgiplast Ltd. Market Outlook The Indian market for peripheral intravenous catheters (PIVCs) is split up into 2 segments: conventional PIVC and safety PIVC. PIVCs are inserted in veins and arteries. An arterial access site is utilized in patients that require blood pressure monitoring. Firmer catheters are preferred for arterial access. A venous access site is utilized for infusing fluids, providing antibiotic treatment and other standard procedures. In 2016, safety PIVCs represented 12% of the total market for PIVCs, with the remaining balance represented by conventional PIVCs. Growth in the unit sales of advanced materials PIVCs is expected to drive gains in the share of safety PIVCs over the forecast period. The global peripheral I.V. catheter market was valued at $3,702.2 million in 2015, and it is expected to grow at a CAGR of 6.0% during the period 2016 - 2022. The global market is increasing, due to growing geriatric population and increasing incidence of chronic diseases. In addition, the growing demand for injectable drugs in comparison to the oral medications, increasing healthcare expenditure and technological advancements in peripheral I.V. catheter is encouraging the growth of the global peripheral I.V. catheter market. Tags IV Cannula Manufacture, IV Cannula Manufacturing Plant, Project Report on IV Cannula Manufacturing, Production Plant of IV Cannula, IV Cannula Manufacture in India, How to Manufacture Disposable Surgical Devices, Catheter Manufacturing, Medical Device Manufacturing, Catheter Manufacturing Process, Cannula Manufacturing, Disposable syringe with Needle, IV Cannula Manufacture, IV Solutions Factory, Production of IV Catheter, Medical Disposable Products, How to Start IV Catheter Production Plant, Catheter Production, Project Report on Manufacturing Medical Plastic Catheters Syringes, Medical Device Manufacturing, IV Cannula Assembling, How catheter is made, Start a Disposable Syringes Manufacturing Business, Peripheral Intravenous Cannula, Cannula manufacture, IV Cannula Tube cutting, Cannula Industry, Medical Device Business, Cannula Manufacturing Industry, IV Cannula Manufacturing project ideas, Projects on Small Scale Industries, Small scale industries projects ideas, IV Cannula Based Small Scale Industries Projects, Project profile on small scale industries, How to Start IV Cannula Manufacturing Industry in India Catheter Production Projects, New project profile on Catheter Production industries, Project Report on IV Cannula Manufacturing Industry, Detailed Project Report on IV Cannula Manufacturing, Project Report on Catheter Production, Feasibility report on Catheter Production, Free Project Profile on Catheter Production, Project profile on IV Cannula Manufacturing, Download free project profile on IV Cannula Manufacturing, Industrial Project Report, Project consultant, Project consultancy, NPCS, Niir, Process technology books, Small Business Ideas that are Easy to Start, How to Start Business in India, Top Small Business Ideas in India for Starting Your Own Business, Top Easy Small Business Ideas in India, Small Investment Big Returns, Top Best Small Business Ideas in India, Business Ideas With Low Investment, How to Get Rich?, Low Cost Business Ideas, Simple Low Cost Business Ideas, Top Small Business Ideas Low Invest Big Profit in India Smart Business Ideas, Very Low Budget Best Business Ideas, Business consultancy, Business consultant, Project identification and selection, Preparation of Project Profiles, Startup, Business guidance, Business guidance to clients, Startup Project for IV Cannula Manufacturing, Startup Project, Startup ideas, Project for startups, Startup project plan, Business start-up, Business Plan for a Startup Business, Great Opportunity for Startup, Small Start-up Business Project, Project report for bank loan, Project report for bank finance, Project report format for bank loan in excel, Excel Format of Project Report and CMA Data, Project Report Bank Loan Excel, Detailed Project Plan Report
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Women's Lingerie-Ladies Undergarments (Bra & Panties)

Hosiery industry is an ancient industry in the field of textile industry having very good potential in domestic market and also in the export market. There is increasing market demand for hosiery undergarments for its various advantages. Cotton undergarments are widely used by all classes of people because of its good absorbency, cheaper prices and ready availability. These foundation garments are used by the people throughout the year under different climatic conditions. It is presumed that there will be no problem in marketing of knitted undergarments of good quality. Ladies innerwear (Bra and panties) is the highest growing apparel item across all income groups and exclusive boutiques have popped up in all places. Nothing cramps the style faster than ill-fitting and uncomfortable undergarments. Thus, innerwear are not only made attractive, but also comfortable and practical. Top stylists unchain their creativity by inventing fabulous new forms and materials which make ladies innerwear even more sexy, eccentric and wild, without leaving out elegance. There has been an increase in demand for innovative, comfort-oriented undergarments and lately, many women are forgoing those fussy lingerie designs for simple, uncomplicated ladies undergarments. In addition to keeping outer garments from soiling, ladies innerwear are worn for a variety of reasons: warmth, comfort and hygiene being the most common. Market Outlook The Innerwear Category is one of the high growth categories in the apparel market and promises growth and innovation. The higher income, along with higher discretionary spending, growing fashion orientation of consumers and product innovations by the innerwear market have turned innerwear from a traditionally utilitarian item to an essential fashion requirement. The current size of the Indian innerwear market is Rs. 15,870 crores ($2.9 billion). The category is also growing at an impressive CAGR of 12 per cent and is expected to reach Rs. 27,900 crores ($5.1 billion) by 2017. The womens innerwear market, which is driven by value-added innerwear products, contributes around 60 per cent to the market. The women’s innerwear market worth Rs. 9,540 crores ($1.7 billion) is one of the fastest growing categories within women’s apparel. This category is growing at a CAGR of 14 per cent, and is expected to reach Rs. 18,380 crores ($3.4 billion) by 2017. The lingerie market in India can be classified into super-premium, premium, mid-market and economy and mass market segments. A major share of the lingerie market is held by the mid-market and economy segments, in terms of both value and volume. The super-premium and premium segments are relatively smaller, but fast-growing segments. In the present scenario, the premium and super premium segments of the lingerie industry are advancing following a consumer shift from economy and mid-market segment to the premium segment. 90% of lingerie in India are sold in mom and pop stores where the experience is very poor because of no trial room, no female staff, stocking capacity is very low, no guidance on size etc. Here, interestingly selling lingerie online is not difficult because the product is seen as utility product in India. According to a research report, in volume terms, the women’s lingerie segment holds a 52 per cent share of the total innerwear market in India. In value terms, the women’s lingerie segment holds a 66 per cent share of the total innerwear market, thereby enjoying a higher Average Selling Price (ASP) as compared to the men’s innerwear market. India's lingerie market is currently valued at $3 billion. A mere 1% of it is online. In the next few years the market value is projected to jump to $5 billion. While physical stores obviously ring in the bulk of the sales, the unavailability of sizes, lack of privacy and shortage of trained personnel has paved the way for online lingerie portals. Tags Profitable Small Business Opportunities in Clothing Industry, How Brassiere is Made, Ladies Undergarments Manufacture, Starting Undergarments Manufacturing Business, Undergarments Manufacturer in India, Undergarment Manufacturing, Undergarments Manufacturing Business Plan, Undergarments Manufacturing, Undergarments Manufacturing Process, Undergarments Manufacturing Project, Undergarments Industry in India, Process of Ladies Undergarments Manufacturing, Ladies Undergarment Manufacturer, Women's Undergarments Manufacture, Bra & Panty Manufacture, Manufacturing of Ladies Undergarments, Production Process of Ladies Undergarments, Undergarments Manufacture for Women, Process of Manufacture Ladies Undergarment, How to Start Women's Undergarments Manufacturing Business, Manufacturing Process of Ladies Undergarments, Steps to Ladies Undergarment Manufacturing, Ladies Undergarment Manufacturing Unit, How to Start My Own Ladies Undergarment Manufacturing Business, Small Scale Ladies Undergarment Manufacturing Business, Garments Manufacturing, Business Plan for Ladies Undergarment Manufacturing, Project Profile on Ladies Undergarment Manufacturing Industry, Industrial Ladies Undergarment Manufacturing, Manufacturing Plant of Ladies Undergarments, Process for Manufacturing Ladies Undergarments, Ladies Undergarment Making, Profitable Manufacturing Business of Ladies Undergarments, Commercial Production of Ladies Undergarments, Bra Making Process, Bra Manufacturing Process, How Bras Are Made, Guide to Bra Making, Method of Manufacturing Bra, Production Process of Bra, Process for Making Panties, Panties Manufacture, Process for Production of Panties, Women's Lingerie, Innerwear Manufacturing, Production Process of Women's Innerwear, Business Plan for Manufacturing of Women's Innerwear, Women's Lingerie Manufacturing, Method of Manufacturing Women's Lingerie, Women's Lingerie Production, Profitable Manufacturing Business of Women's Lingerie, Ladies Undergarment Manufacturing Project Ideas, Projects on Small Scale Industries, Small Scale Industries Projects Ideas, Ladies Undergarment Manufacturing Based Small Scale Industries Projects, Project Profile on Small Scale Industries, How to Start Ladies Undergarment Manufacturing Industry In India, New Project Profile on Ladies Undergarment Manufacturing Industries, Project Report on Ladies Undergarment Manufacturing Industry, Detailed Project Report on Ladies Undergarment Manufacturing, Pre-Investment Feasibility Study on Ladies Undergarment Manufacturing, Techno-Economic Feasibility Study on Ladies Undergarment Manufacturing, Feasibility Report on Ladies Undergarment Manufacturing, Free Project Profile on Ladies Undergarment Manufacturing, Project Profile on Ladies Undergarment Manufacturing, Download Free Project Profile on Ladies Undergarment Manufacturing, Industrial Project Report, Project Consultant, Project Consultancy, NPCS, Niir, Process Technology Books, Business Consultancy, Business Consultant, Project Identification and Selection, Preparation of Project Profiles, Startup, Business Guidance, Business Guidance to Clients, Startup Project for Ladies Undergarment Manufacturing, Startup Project, Startup Ideas, Project For Startups, Startup Project Plan, Business Start-Up, Business Plan for Startup Business, Great Opportunity for Startup, Small Start-Up Business Project, Project Report for Bank Loan, Project Report for Bank Finance, Project Report Format for Bank Loan in Excel, Excel Format of Project Report and CMA Data, Project Report Bank Loan Excel, Detailed Project Plan Report
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Floor Cleaners Making Business

Floor Cleaners Making Business. How to Start Profitable Household Cleaning Products Manufacturing Business. Liquid Floor Cleaners (Lizol & Easy Type) Cleaning products are a high demand product. People clean all of the time, everywhere. From churches to schools to homes and offices, people always need cleaning products. Improved living standards, growing awareness regarding home cleanliness & sanitation, sophisticated homes and surfaces, the need for disinfection coupled with the frequent outbreaks of infectious disease are the factors driving the household cleaning market in India. Floor Cleaners are the aid of housekeeping to keep the house neat and clean. Cleaning agents in general can be defined as that are used to assist the cleaning process. Cleaning is primarily the removal of dirt and dust. It is used to remove stains dirt, litter, and grit, sand which scratch and wear down the surface and to remove allergens, in particular dust. Few Indian Major Players are as under • Henkel Spic India Ltd. • Hindustan Unilever Ltd. • Reckitt Benckiser (India) Pvt. Ltd. Market Outlook Floor cleaning market is the second largest product category of the toiletries and household cleansing market of India with revenues reported at INR ~ million in FY’2014. The floor cleaning market has been further segmented into dish wash bars, liquid and powder in which dish wash bars commanded a predominant share. India Household Cleaning Market Outlook, 2021, the overall market for household cleaning is anticipated to grow with a CAGR of 22.74% in the next five years. India cleaning chemicals market stood at $ 2,388 million in 2016, and is projected to grow at a CAGR of 15% in value terms to reach $ 9,655 million by the end of 2026, on the account of increasing incidence of various infections, rapid urbanization, coupled with growing number of new commercial setups and increasingly stringent safety standards. Additionally, setting up of new healthcare setups, rising disposable income and launch of new and innovative cleaning chemicals are propelling the market for cleaning chemicals in India. The global market for household cleaners has witnessed growth at a steady pace in the past few years. The market has continued to gain significant profits across mature markets such as North America and Europe while also seeing encouraging growth across unconventional markets such as Asia Pacific and Latin America. Factors such as adoption of healthier lifestyles and the increasing concern for infectious diseases have been some of the key drivers of the market in the past years. There has been an increasing trend in the developed and the developing economies alike regarding the increasing use of homecare and hygiene products, which is expected to fuel the global demand for household cleaners. The increase in commercial use of household cleaners such as surface deodorizers and fabric refreshers has added to the demand for household cleaners. The global household cleaners market was valued at US$ 27,468.6 mn in 2015, and is expected to reach US$ 39,400.9 mn by 2024, in terms of revenue. This will represent a CAGR of 4.1% from 2016 to 2024. With a population of over one billion, India is one of the largest economies in the world in terms of purchasing power and increasing consumer spending, next to China. The Indian FMCG industry, with an estimated market size of ~ `2 trillion, accounts for the fourth largest sector in India. In the last decade, the FMCG sector has grown at an average of 11% a year; in the last five years, annual growth accelerated at compounded rate of ~17.3%. Tags Liquid Floor Cleaner Making, Manufacturing Process of Liquid Floor Cleaner, Small Liquid Floor Cleaner Manufacturing Business, Project Report on Manufacture of Liquid Floor Cleaner, Formulations and Manufacturing Process of Liquid Floor Cleaner, Liquid Floor Cleaner Manufacturing, Liquid Floor Cleaner Formulation, Liquid Floor Cleaner Making Formula, Liquid Floor Cleaner Manufacturing Plant, Floor Cleaning Compositions, Manufacturing of Floor Cleaning, Liquid Floor Cleaner Manufacturing Process, Liquid Floor Cleaner Manufacture, Industrial Manufacturing of Liquid Floor Cleaner, Guide to Liquid Floor Cleaner Production, Production Process of Liquid Floor Cleaner, Production of Liquid Floor Cleaner, Manufacturing Plant of Liquid Floor Cleaner, Floor Cleaner Manufacturing Unit, Commercial Production of Liquid Floor Cleaner, Floor Cleaner Manufacture in India, Industrial Cleaning Chemical, How to Make Liquid Floor Cleaner, Production Plant of Liquid Floor Cleaner, Free Liquid Floor Cleaner Manufacturing Business Plans, Floor Cleaner Manufacturing Business, How to Start Liquid Floor Cleaner Production Process, Business Plan for Manufacturing of Liquid Floor Cleaner, Small Scale Floor Cleaner Manufacturing Business Ideas & Opportunities, Business Planning for Floor Cleaner Manufacturing, Production Planning for Liquid Floor Cleaner, Profitable Liquid Floor Cleaner Manufacturing Business Ideas, Liquid Floor Cleaner Making Plant, Small Scale Floor Cleaner Production Plant, Processing Methods for Liquid Floor Cleaner, Starting Floor Cleaner Manufacturing Business, How to Start and Run Profitable Floor Cleaner Manufacturing Business, Startups Plan for Liquid Floor Cleaner Production, Setting Up and Running Small Scale Liquid Floor Cleaner Business, Business Ideas for Liquid Floor Cleaner Production, Liquid Floor Cleaner Manufacturing Project, Method for Producing Liquid Floor Cleaner, Method for Manufacturing of Floor Cleaner, Method for Production of Floor Cleaner, Liquid Floor Cleaner Manufacturing Project Ideas, Projects on Small Scale Industries, Small Scale Industries Projects Ideas, Liquid Floor Cleaner Manufacturing Based Small Scale Industries Projects, Project Profile on Small Scale Industries, How to Start Liquid Floor Cleaner Manufacturing Industry in India, Liquid Floor Cleaner Manufacturing Projects, New Project Profile on Liquid Floor Cleaner Manufacturing Industries, Project Report on Liquid Floor Cleaner Manufacturing Industry, Detailed Project Report on Liquid Floor Cleaner Production, Project Report on Liquid Floor Cleaner Manufacturing, Pre-Investment Feasibility Study on Liquid Floor Cleaner Manufacturing, Techno-Economic Feasibility Study on Liquid Floor Cleaner Manufacturing, Feasibility Report on Liquid Floor Cleaner Manufacturing, Free Project Profile on Liquid Floor Cleaner Production, Project Profile on Liquid Floor Cleaner Production, Download Free Project Profile on Liquid Floor Cleaner Manufacturing, Industrial Project Report, Project Consultant, Project Consultancy, NPCS, Niir, Process Technology Books, Business Consultancy, Business Consultant, Project Identification and Selection, Preparation of Project Profiles, Startup, Business Guidance, Business Guidance to Clients, Startup Project For Liquid Floor Cleaner Production, Startup Project, Startup Ideas, Project for Startups, Startup Project Plan, Business Start-Up, Business Plan for Startup Business, Great Opportunity for Startup, Small Start-Up Business Project, Project Report for Bank Loan, Project Report For Bank Finance, Project Report Format for Bank Loan in Excel, Excel Format of Project Report and CMA Data, Project Report Bank Loan Excel, Detailed Project Plan Reports
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

LPG Bottling Plant

Liquefied Petroleum Gas is a Propane/Butane mixture liquefied under normal ambient temperature and moderate pressures. It is a safe, clean burning, reliable, high calorific value fuel. In addition to its use as a domestic fuel, it is also widely used in industries, where there is a requirement of low sulphur content fuel and fine temperature controls. The Chemical composition of propane is C3H8 and butane, C4H10. Liquefied Petroleum Gas (LPG), popularly known as cooking gas, is a mixture of hydrocarbons which are gaseous at normal temperature, but can be liquefied at moderate pressure, and can be stored in cylinders as a liquid under pressure, and is drawn out and used as gas. Applications: • For industries today, quality, costs, efficiency, environment, heat controllability, among others, are major concerns when it comes to choosing the right fuel. • LPG addresses all these making it the ideal fuel choice for a host of industrial and domestic applications. • LPG is a pure, clean energy source which provides even and controllable heat. This makes it the ideal heat and power source for a wide range of industrial uses. • Since LPG is almost free from sulphur, it can be used in sensitive situations such as chemical processes, etc. • LPG is also used for space and process heating to power industrial ovens, kilns, furnaces, machinery and in food processing units. Market Outlook LPG consumption in India is forecast to surpass 35 MMT by FY26. North region dominated India LPG market over the past few years, and is further forecast to continue dominating the market through FY26. Liquefied petroleum gas (LPG) is a flammable mixture of various hydrocarbons, and majorly consists of propane and butane. LPG gas is colorless and odorless; and emits less quantity of CO2 when compared to petrol or diesel. Thus, LPG is extensively used as a cooking fuel, both in commercial and residential setups throughout the country. Growth in the country’s LPG market over the past few years can be attributed to rising demand from residential and commercial segments in the country. Number of LPG consumers in India increased from 1387.3 million in FY13 to 2,041 million in FY16. “Imports of LPG in India is forecast to almost double from 7.98 MMT in 2015 to 15.50 MMT by 2025, as the domestic requirement for LPG is not being meet through domestic production. Tags LPG Bottling Plants, LPG Bottling Plant in India, Liquefied Petroleum Gas Bottling Plants, LPG Bottling Plant Process, Project Report on LPG Bottling Plant, LPG Bottling Plant Project Report, Process of LPG Bottling Plants, Set Up LPG Bottling Plant in India, Project Profile on LPG Bottling Plants, LPG Bottling Plant Equipment, LPG Bottling Plant Business Plan, Business Opportunities in LPG Bottling Plants, Business Ideas for LPG Bottling Plants, LPG Cylinders Filling Plant, LPG Filling Plant, LPG Filling Plant Business Plan, Setting Up LPG Bottling Plant, Guide for LPG Filling Plant, LPG Filling Plant Projects, Planning and Guidelines for LPG Filling Plant, LPG Bottling Plant Project Ideas, Projects on Small Scale Industries, Small Scale Industries Projects Ideas, Project Profile on Small Scale Industries, How to Start LPG Bottling Plant in India, New Project Profile on LPG Bottling Plant, Detailed Project Report on LPG Bottling Plant, Project Report on LPG Bottling Plant, Pre-Investment Feasibility Study on LPG Filling Plant, Techno-Economic Feasibility Study on LPG Bottling Plant, Feasibility Report on LPG Bottling Plant, Free Project Profile on LPG Filling Plant, Project Profile on LPG Bottling Plant, Download Free Project Profile on LPG Filling Plant, Industrial Project Report, Project Consultant, Project Consultancy, NPCS, Niir, Process Technology Books, Business Consultancy, Business Consultant, Project Identification and Selection, Preparation of Project Profiles, Startup, Business Guidance, Business Guidance to Clients, Startup Project for LPG Filling Plant, Startup Project, Startup Ideas, Project for Startups, Startup Project Plan, Business Start-Up, Business Plan for Startup Business, Great Opportunity for Startup, Small Start-Up Business Project, Project Report for Bank Loan, Project Report for Bank Finance, Project Report Format for Bank Loan in Excel, Excel Format of Project Report and CMA Data, Project Report Bank Loan Excel, Detailed Project Plan Reports
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

How to Start LPG Cylinder Manufacturing Plant

How to Start LPG Cylinder Manufacturing Plant. Domestic and Commercial LPG Cylinders Production Project LPG Cylinder is an essential item for filling liquefied petroleum gas used for cooling purpose. The body of LPG cylinder is deep drawn in two pieces then these are welded together to make a compact unit without any leak and defect etc. LPG cylinders are in use in 5 Kg., 12 Kg., 14.2 Kg. & 19 Kg. capacities. LPG Cylinder (Liquid Petroleum Gas) is used for domestic cooking purposes in many states as a main fuel source. The 14.2 kg cylinder is used for domestic usage and 19 kg for commercial usage and government has also introduced 5 kg cylinder for domestic and commercial usage. The ultimate use of the LPG cylinder is for the storage and transportation of gas from one place to another. As the gas pipe line can only be managed to the nearby area of the gas producing Centre, and in India gas pipeline is only available in big cities. LPG touches our lives in so many ways. From housing to health, from garments to glass, from livestock to hospitality. Market Outlook Domestic Liquefied Petroleum Gas (LPG) users consume a massive 90% of the total production of LPG in India for cooking purposes. LPG Cylinders plays crucial role in containing and transporting hazardous LPG from LPG filling plant to end consumer. [Approximately 3 million LP Gas Cylinders are delivered to Indian homes every day. It means, approximately 900 million cylinders in a year are delivered to homes for domestic consumption in India. This demand for LPG is increasing every day. ? LPG Demand in India • Fourth largest consumer of LPG in the world after USA, China & Japan. • Third largest consumer in domestic sector in the world after China & USA. • Major marketing of LPG is Domestic Sector. • Home Delivery of 3 Million LP Gas cylinders per day (i.e 900 Million / year) • Steady Growth @ 8% p.a. in LPG Consumption in India. The country’s domestic liquefied petroleum gas (LPG) consumption is expected to grow by nearly 10 per cent in 2017-18, over the last fiscal. Domestic LPG consumption for 2016-17 stood at 21.5 million tonne, up nearly 10 per cent from the previous fiscal’s 19.6 million tonne. Indian LPG imports have been registering some remarkable trends in the last 10 years. The growth trends over the last 10 years, 5 years and 1 year are: 17% CAGR (FY07 to FY17), 14% CAGR (FY12 to FY17) and 23%. At nearly 11 million tonnes in FY17, India surpassed Japan's imports at 10.6 million tonnes. A rapid increase in urban population combined with increasing LPG penetration in rural areas has resulted in a 10% growth in LPG consumption, making India the second largest LPG consumer in the World at 19 million tonne per year. Tags LPG Cylinder Production, Making of LPG Cylinder, LPG Cylinder Manufacturing, Cylinder Manufacturing Process, LPG Cylinder Manufacturing Process, LPG Cylinder Manufacture, LPG Cylinder Production Process, LPG Cylinder Manufacturing Plant, How to Start LPG Cylinder Manufacturing in India?, Manufacturing Process of Gas Cylinders, Manufacturing of LPG Cylinders, Gas Cylinder Manufacture, Manufacturing of LPG Cylinders for Domestic Purpose, LPG Cylinder Production Plant, Commercial LPG Cylinders, Project Profile on LPG Cylinders, Industrial and Commercial (Non-Domestic) LPG Cylinder, Commercial LPG Cylinder Production, LPG Cylinders for Domestic and Commercial, LPG Cylinder Manufacturing Project Report, LPG Cylinder Manufacturing Plant in India, LPG Cylinders Making, Cylinder Manufacturing Company, LPG Gas Cylinder Factory, Operating and Setting Up LPG Cylinder Manufacturing Plant, Commercial LPG Cylinder Manufacturing Plant, Domestic LPG Cylinder Manufacturing Unit, Domestic LPG Cylinder Manufacturing project ideas, Projects on Small Scale Industries, Small scale industries projects ideas, Commercial LPG Cylinder Manufacturing Based Small Scale Industries Projects, Project profile on small scale industries, How to Start LPG Cylinder Manufacturing Industry in India, New project profile on LPG Cylinder Manufacturing industries, Project Report on Commercial LPG Cylinder Manufacturing Industry, Detailed Project Report on Domestic LPG Cylinder Manufacturing, Project Report on Domestic LPG Cylinder Manufacturing, Pre-Investment Feasibility Study on Domestic LPG Cylinder Manufacturing, Techno-Economic feasibility study on LPG Cylinder Manufacturing, Feasibility report on Domestic LPG Cylinder Manufacturing, Free Project Profile on Commercial LPG Cylinder Manufacturing, Project profile on Commercial LPG Cylinder Manufacturing, Top Best Small Business Ideas for Beginners 2017, Small Business But Big Profit in India, Best Low Cost Business Ideas, Small Business Ideas that are Easy to Start, How to Start Business in India, Top Small Business Ideas in India for Starting Your Own Business, Top Easy Small Business Ideas in India, Small Investment Big Returns, Top Best Small Business Ideas in India, Business Ideas With Low Investment, How to Get Rich?, Download free project profile on LPG Cylinder Manufacturing, Industrial Project Report, Project consultant, Project consultancy, Startup Project for Commercial LPG Cylinder Manufacturing, Startup Project, Startup ideas, Project for startups, Startup project plan, Business start-up, Business Plan for a Startup Business, Great Opportunity for Startup, Small Start-up Business Project, Project report for bank loan, Project report for bank finance, Project report format for bank loan in excel, Excel Format of Project Report and CMA Data, Project Report Bank Loan Excel, Detailed Project Plan Report
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Grease & Lube Oil Blending Plant

Grease & Lube Oil Blending Plant. Lubricants & Greases Manufacturing Business. Lube Oil Blending and Filling Plant. Lubrication is simply the use of a material to improve the smoothness if movement of one surface over another; the material which is used in this way is called a lubricant. Lubricants are usually liquids or semi-liquids, but may be solids or gases or any combination of solids, liquids, and gases. Lubricant is a substance which is used to control (more often to reduce) friction and wear of the surfaces in a contact of the bodies in relative motion. Depending on its nature, lubricants are also used to eliminate heat and wear debris, supply additives into the contact, transmit power, protect, seal. A lubricant can be in liquid (oil, water, etc.), solid (graphite, graphene, and molybdenum disulfide), gaseous (air) or even semisolid (grease) forms. Most of the lubricants contain additives (5-30%) to improve their performance. Lubricating oil creates a separating film between surfaces of adjacent moving parts to minimize direct contact between them, decreasing heat caused by friction and reducing wear. Lubricating oils are specially formulated oils that reduce friction between moving parts and help maintain mechanical parts. Lubricating oil is a thick fatty oil used to make the parts of a machine move smoothly. Lubricating oil, sometimes simply called lubricant/lube, is a class of oils used to reduce the friction, heat, and wear between mechanical components that are in contact with each other. Lubricating oil is used in motorized vehicles, where it is known specifically as motor oil and transmission fluid. Applications of Lubricants: Lubricants are primarily used to reduce friction stress between surfaces. They have the following uses: • As antiwear, antioxidants, and antifoaming agents. • As demulsifying and emulsifying agents. • As rust and corrosion inhibitors. • In machinery as engine oils, compressor oils, gear oils, and piston oils. • As hydraulic, brake, and gear box fluids. • Used in the soap and paint industries. • Some specific uses of certain variants of lubricants are: • Synthetic lubricants are used in turbines, vacuum pumps, and semiconductor devices. • Molybdenum is used as a paint pigment and as a catalyst. • Liquid lubricants are used in medicines. Lubricants are also used as cutting fluids in many industries. Oil, water, and oil emulsion are used as cutting fluids. These liquids are used to cool as well as to lubricate surfaces. Emulsions of oil in water are most widely used as cutting fluids. Lubricants are also used as cutting fluids in cutting, grinding, trading, and drilling of the metals. Cutting fluids are used in machining operations where friction is very high because of close contact between the work piece and the tool. This high friction generates a large amount of local heat and the tool is overheated and may even lose its temper and hardness. As a result, liquids, such as lubricating oils, water, or water emulsions are used on working parts of the machines. The use of lubricating oils in vehicles is vital to their operation. When an engine is properly lubricated, it needs to put less work into moving pistons as the pistons glide easily. In the long run, this means that the car is able to operate while using less fuel and run at a lower temperature. Overall, the proper use of lubricating oil in a car improves efficiency and reduces the amount of wear and tear on moving engine parts. Grease A grease is best thought of as a sponge full of oil, with the sponge being the “base“ or thickener. It holds the oil and additives in place and gives the grease the basic characteristics such as drop point and water resistance. The oil content, typically 80-90% of the grease, provides most of the lubrication performance. To achieve the desired characteristics of a grease, careful selection of base lubricating oil viscosity, base type additives and fillers is essential. When Are Greases Used Greases are generally used in place of oil in the following situations: • The manufacturer specifies a grease and a lubricant is not required for cooling. • Where the grease acts as a seal to prevent entry of contaminants or loss of lubricant. • Soft grease can be used in place of oils in gearboxes with worn or ineffective seal or where oils would be thrown off the bearing surfaces or leak past seals. • Lubrication points can only be reached during maintenance shutdowns. • It is important to maintain lubricant in the bearing area during periods of prolonged shutdowns or frequent stop-start operations (oil drains away when a machine is stopped but a grease does not). • Where noise reduction is important. • To decrease the frequency of lubrication. • In worn bearings previously lubricated by oil to reduce noise and extend useful life. • Resists leakage, dripping or undesirable throw off. • The main advantage of grease over a fluid are its potentially longer life convenience and ease of application. Market Outlook The main role of a lubricant is to reduce friction between metal surfaces, leading to reduction of heat generation and ultimately to the protection of the parts. Lubricants play an important role in a variety of automotive, commercial and industrial applications such as automotive, manufacturing, power generation and marine. Automotive vehicles require engine oils, transmission fluids, brake fluids and greases. The main role of a lubricant is to reduce friction between metal surfaces, leading to reduction of heat generation and ultimately to the protection of the parts. Lubricants play an important role in a variety of automotive, commercial and industrial applications such as automotive, manufacturing, power generation and marine. Automotive vehicles require engine oils, transmission fluids, brake fluids and greases. A total of 64,585 KL of lubricants, worth of LKR 26.11 billion were sold during the year 2016, up 11.4 % compared to the total sales (quantity) of the year 2015. Lubricant consumption in India stood at around 2.9 million MT during 2013-14, registering a healthy growth rate of 7.6% during 2008-13; the market was valued at around INR 260 billion. Automotive lubricants account for around 47% of the lubricant usage in India; industrial lubes and process oils together account for the rest. Currently, USA is the largest consumer of lubricant oil across the world. China and India comes at second and third position respectively. The consumption pattern In Indian lubricant oil industry is similar to world lube industry. Majority of lubricant is being consumed by automobile sector (55%), rest is being used for Industrial purpose and marine industry. Industrial lubricants are majorly used in the core industrial sectors such as spamming cement, coal, steel, engineering, sugar, marine, defense, railways, power, surface transport, fertilizer and others. The business is driven by growth in infrastructure investments, manufacturing, mining sector and increased manufacturing exports. In this segment demand for high performance lubricants are driven by applications such as compressors, textile machinery windmills, captive power plants and others. One of the essentials in lubricant science is world-class technology. Lubricant technology is driven by the changing needs of the customers and stakeholders. As the global lubricants market volume expected to grow from an estimated 38,635.3 KT in 2014 to 42,780.7 KT by 2019, with a CAGR of 2.4 per cent between 2014 and 2019, India is set to put its foots into the path of economic growth as well. Automotive is the largest and fastest-growing end-use industry for grease. The passenger vehicles and commercial vehicles are driving the demand for high performance grease in the automotive industry. In the automotive industry, grease is extensively used in various auto parts such as wheel bearings, universal joints, suspensions, gears, switches, and connectors because of their excellent properties such as mechanical stability, temperature tolerance, water resistance, and anti-oxidants. The need for high performance grease is rising in the increasing manufacturing of machines and equipment for end-use industries. Industrial greases market trails the GDP due to their widespread application in manufacturing of goods and automotive maintenance operations. Due to the surge in manufacturing in Asia Pacific, the industrial greases market in the region is estimated to witness growth, expanding at a CAGR of 6.3% between 2015 and 2021 in terms of revenue. With the anticipated increase in manufacturing in China in the coming years, the demand for industrial greases in the country is expected to rise between 2015 and 2021. With the rising operating time of machines and greater speed of operations, the need for industrial greases is expected to increase by 2021. Besides, with increase in mechanization of manufacturing activities in developed regions such as North America and Europe, demand for industrial greases is anticipated to increase in these markets. Tags Lube Oil Blending Plant, Lubricants Blending Plant (Lubricants/Grease), Grease & Lube Oil Blending Plant, Lubricants Blending Process, Lubricants and Greases Manufacturing Plant, Lubricants and Greases, Blending Plant, Lubricant and Grease Blending Company, Project Report on Grease Manufacturing, Grease Manufacturing Unit, Industrial Oils and Greases? Blending Plant, Lube Oil Blending Plant and Filling Line, Lubricating Oil Blending Plant and Production Line, Lube Oil Filling Plant, Oil Blending Plant, How Lubricating Oil is Made, Lube Oil Blending, Lubricants & Greases Manufacturing Plant, Lube Blending Plant, Pre-Feasibility Report on Small Scale Lube Oil Blending Plant, Lubricant Blending Process, Process for Making Blended Lubricant, How are Lubricants Produced, Lubricant Blending, Manufacturing of Lubricant Oil, Lubricating Oils and Greases, Lube & Grease Oil Blending Plant and Filling Plant, Manufacture of Oils and Greases, Grease Blending Plant, How to Start Grease Blending Company, Grease Plant, Grease Manufacturing Plant, Blending Plant in India, Grease Manufacturing Plant, Lubricating Oil and Grease Manufacturing, Grease Manufacturing Project Report, Lubricant Blending project ideas, Projects on Small Scale Industries, Small scale industries projects ideas, Lube Oil Blending Based Small Scale Industries Projects, Project profile on small scale industries, How to Start Lubricating Oil Blending Plant Industry in India, Lubricating Oil Blending Projects, New project profile on Lubricant and Grease Blending industries, Project Report on Lube Oil Blending Industry, Detailed Project Report on Lube Oil Blending, Project Report on Lubricant and Grease Blending Plant, Pre-Investment Feasibility Study on Lubricating Oil Blending Plant, Techno-Economic feasibility study on Lubricating Oil Blending Plant, Feasibility report on Lubricant and Grease Blending Plant, Free Project Profile on Lube Oil Blending, Project profile on Lube Oil Blending, Download free project profile on Lube Oil Blending, Industrial Project Startup Project for Lubricant Blending Process
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Profitable Business Ideas in India for Starting Macaroni, Vermicelli, Noodles and Instant Noodles with Tastemaker Business

Vermicelli Vermicelli is a traditional type of pasta round in section similar to spaghetti. In Italy vermicelli is slightly thicker than spaghetti, but in the United States it is instead slightly thinner. Vermicelli is very fine, long strands of pasta – like a skinny spaghetti – often used in soups. The name means ‘little worms’ in Italian (though in America, it is described more ethereally 'angel hair' pasta). It is available fresh or dried. Fideo is a type of short vermicelli pasta, originally produced in Europe, particularly Spain that spread to Mexican and Latin American cuisine. It is commonly used in chicken soup and in sopa seca, a type of side-dish. Vermicelli is a popular instant food product. It falls under the category of extruded product and is made from wheat flour. At times tapioca or soybean or groundnut flour is also added. Thus, it is rich in proteins and liked by people from all walks of life, irrespective of age. It is basically a snack food item and at times it is also used as a table enricher. With changing lifestyles, greater awareness about health and preference for instant food items have made vermicelli very popular and an item of mass consumption. Noodles Noodles are one of the staple foods consumed in many Asian countries. Instant noodles have become internationally recognized food, and worldwide consumption is on the rise. The properties of instant noodles like taste, nutrition, convenience, safety, longer shelf-life, and reasonable price have made them popular. Quality factors important for instant noodles are color, flavor, and texture, cooking quality, rehydration rates during final preparation, and the presence or absence of rancid taste after extended storage. The origin of noodles has been disputed. Claims have been made that the noodle was of Chinese, Arabian and European origin. A Nature article claimed the oldest evidence of noodle consumption was from 4,000 years ago in China. While long, thin strips may be the most common, many varieties of noodles are cut into waves, helices, tubes, strings, or shells, or folded over, or cut into other shapes. Noodles are usually cooked in boiling water, sometimes with cooking oil or salt added. They are often pan-fried or deep-fried. Noodles are often served with an accompanying sauce or in a soup. Noodles can be refrigerated for short-term storage, or dried and stored for future use. Instant Noodles Instant noodles are sold in a precooked and dried noodle block, with flavoring powder and/or seasoning oil. The flavoring is usually in a separate packet, although in the case of cup noodles the flavoring is often loose in the cup. Some instant noodle products are seal packed; these can be reheated or eaten straight from the packet/container. Dried noodle blocks are cooked or soaked in boiling water before eating. The main ingredients used in dried noodles are usually wheat flour, palm oil, and salt. Common ingredients in the flavoring powder are salt, monosodium glutamate, seasoning, and sugar. The dried noodle block was originally created by flash frying cooked noodles, and this is still the main method used in Asian countries, but air-dried noodle blocks are favored in Western countries. Instant noodles are made from wheat flour, starch, water, salt or kan sui (an alkaline salt mixture of sodium carbonate, potassium carbonate, and sodium phosphate), and other ingredients that improve the texture and flavor of noodles. Other flours may be mixed with wheat flour to make specific types of instant noodles; for example, buckwheat flour is added at 10-40% of wheat flour in the production of buckwheat noodles or soba. The popular noodles include instant Chinese noodles, instant Japanese noodles, and instant European style noodles, which vary in the basic ingredients used to make the noodles. Instant Chinese noodles use kan sui, whereas instant Japanese noodles do not, and the European style noodles often are made with semolina (a coarse ground product of durum wheat). Market Survey The global demand for instant noodles is expected to reach 145.8 billion packs by 2020, driven by the rising trend of convenience food in emerging markets. India takes a major share of this demand, ranking fifth in terms of the global demand for instant noodles after China, Indonesia, Japan and Vietnam. India is the world’s second largest producer of food next to China but accounts for less than 1.5% of International food trade. The Indian food sector is poised for a rapid growth and has potential to become reliable outsourcing partner in the food industry given its strength in primary food sector. India is the most attractive Instant Noodles market in the world. Instant Noodles market matured in India over the years but still it is limited to few players. Vermicelli is a very common food item and is manufactured mostly in unorganized sector. Majority of its products lie on cottage scale and they feed the local and adjoining market. Hence, it is always advisable to set up this industry near the big cities. Tags Making of Spaghetti and Macaroni, Macaroni Manufacturing, How to Make Pasta, Macaroni Making, Pasta Making, Macaroni Making Process, Manufacturing of Vermicelli and Macaroni, Pasta Production Process, Making of Pasta, Macaroni Pasta Production, Pasta Manufacturing, Production of Pasta, Dry Pasta Manufacturing, Preparation of Vermicelli and Noodles, Short Pasta Macaroni Making, Macaroni Production Process, How is Pasta Made, Pasta Manufacturing Process, Pasta Production, Macaroni Pasta Manufacturing Process, Vermicelli Production Process, Vermicelli Production, Making of Vermicelli, Vermicelli Production, Vermicelli Making, Noodles Making , Vermicelli Processing, Vermicelli ,Macaroni, Pasta Making, Noodles Processing, Instant Noodle Production, Noodles Manufacturing, Noodle Production, How to Make Noodles, Process Making Cup Noodles, Noodle Making Process, Fresh Noodle Production, Instant Noodles Manufacturing, How to Prepare Noodles, Instant Noodle Manufacture, Process of Full Instant Noodle, Instant Noodles Processing, Instant Noodle Maker, Instant Noodle Processing, Dried Noodles Production, Pasta/Macaroni making, Fresh Noodle Making, Fresh Noodle Processing, Process of Noodles, Semi-Dried Fresh Noodle Making, Dry Noodles Production, How to make Fresh Pasta, How are Noodles Produced, Instant Noodle Making, Instant Noodles Making, Noodles Manufacturing Business, How to Manufacture Instant Noodles, Making Money from Instant Noodles, Instant Noodles Production, Instant Noodle Business, Noodles Manufacturing Process, Noodles Manufacturing Business Plan, Macaroni, Vermicelli & Noodles Manufacturing, Small Scale Business in Manufacturing Noodles, How to Manufacture Instant Noodles, Pasta Manufacturing Business, Pasta Manufacturing Business, Process of Instant Noodles, How are Noodles Made, Processing of Vermicelli, Production of Vermicelli, Production and Processing of Vermicelli, How to Become a Fresh Pasta Manufacturer, Start Fresh Pasta Business, A Vermicelli Making Business, Profitable Small Business Manufacturing Ideas for Noodle Making, Business Manufacturing Ideas for Instant Noodles, Opening a Noodles Business, Manufacturing Business Plan For Noodles, Opening Business Plans For Instant Noodles, Processing of Vermicelli, Vermicelli Making Process, Process of Manufacturing Vermicelli
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Sugar Manufacturing Industry

Sugar Manufacturing Industry. Mini Sugar Plant. Sugarcane Mill. How Cane Sugar is processed? Manufacturing Project of Sugar Mill. Sugar can be produced from sugarcane, sugar-beet or any other crop having sugar content. But in India, sugarcane is the main source of sugar. At present, this is the second largest agro-based industry of India after cotton textile industry. This industry involves a total capital investment of Rs. 1,250 crore and provides employment to 2.86 lakh workers. In addition, 2.50 crore sugarcane growers also get benefit from this industry. India has a long tradition of manufacturing sugar. Sugar industry is an important agro-based industry that impacts rural livelihood of about 50 million sugarcane farmers and around 5 lakh workers directly employed in sugar mills. India is the second largest producer of sugar in the world after Brazil and is also the largest consumer. Indian sugar industry is a critical industry, as on one hand it services the domestic market, the largest in the world and on the other hand, it supports 50 million farmers and their families. It is the second largest agro based industry in India. Sugar industry in India occupies a distinctive position in the economic and social fabric of the economy. It is playing a pivotal role especially in the upliftment of the rural economy. Future Growth of India sugar market is expected to be led by increasing sugarcane yield, rising demand of sugar by the consumers and increasing sugar recovery rate. The sugar industry in India has witnessed a growth in recent years on account of rising number of sugar factories in the country as well as the increasing sugarcane yield in the country. The surge in growth of the industry is majorly originated from the rising sugar demand by the consumers as well as the institutional sector and also forms the increasing expenditure on food and beverages. The sugar market in terms of revenues has grown at a CAGR of 5% from FY’2010-FY’2015. The sugar industry is expected to grow at a rate of ~%, doubling its worth to INR ~ lakh Crore by 2018. The sugar market in India will grow at a respectable rate due to the increasing sugarcane yield and dropping sugar prices. The Indian sugar industry that has already started talking of a record sugar production of almost 29-30 million tonnes in the 2018-19 crop marketing year that will start from October next year. Today Indian sugar industry’s annual output is worth approximately Rs.80, 000 crores. There are 732 installed sugar factories in the country as on 31.07.2017, with sufficient crushing capacity to produce around 339 lakh MT of sugar. The capacity is roughly distributed equally between private sector units and cooperative sector units. Top 10 Sugarcane Producing States in India: 2014-2015 1 Uttar Pradesh 2 Maharashtra 3 Karnataka 4 Tamil Nadu 5 Bihar 6 Gujarat 7 Andhra Pradesh+ Telangana 8 Haryana 9 Punjab 10 Uttarakhand Sugar (Centrifugal) Producers 1. Brazil: 37,800 2. India; 26,605 3. European Union: 16,010 4. China: 14,263 5. Thailand: 11,333 6. United States: 7,672 7. Mexico: 6,383 8. Pakistan: 5,215 9. Australia: 4,400 10. Russia: 4,400 Tags Sugar Manufacturing Industry in India, Sugar Manufacturing Plant, Manufacturing of Sugar in Industry, Sugar Making Business, Sugar Production from Cane Sugar, How is Sugar Made from Sugarcane, Sugar Production Process, Sugar Manufacturing Process, Sugar Production Plant, Sugar Manufacturing Process, Manufacture of Sugar from Sugarcane, Sugar Production, Sugar Industry in India, Sugar Manufacturing Business, Process of Sugar Manufacturing Business, How Sugar is Processed, Sugar Industry Business Plan, Sugar Mill Business Plan, Start Sugar Manufacturing Business, How to Open Sugar Mill, What is the Minimum Capital Required to Start Sugar Mill, Mini Sugar Plant, Sugar Production Business Plan, Indian Sugar Industry, Sugar Manufacturing Company, Sugar Plant in India, How to Start Sugar Factory, Sugar Manufacturing Factory, Sugar Production Unit, Setting Up Sugar Factory, How do I Start Sugar Factory? How Sugar is made? Sugar Manufacturing project ideas, Sugar Production from Sugarcane, Projects on Small Scale Industries, Small scale industries projects ideas, Sugar Manufacturing Based Small Scale Industries Projects, Project profile on small scale industries, How to Start Sugar Manufacturing Industry in India, Sugar Manufacturing Projects, New project profile on Sugar Manufacturing industries, Project Report on Sugar Manufacturing Industry, Detailed Project Report on Sugar Production, Project Report on Sugar Production from Sugarcane, Pre-Investment Feasibility Study on Sugar Manufacturing, Techno-Economic feasibility study on Sugar Production, Feasibility report on Sugar Production from Sugarcane, Free Project Profile on Sugar Production from Sugarcane, Project profile on Sugar Production, Download free project profile on Sugar Production from Sugarcane, Startup Project for Sugar Production
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 78 of 295 | Total 2950 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 78 294 295   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top