REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Equatorial Guinea, Africa- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 17 of 53 | Total 524 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 52 53   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Lithium Ion (LiFePO4) Cell Manufacturing

The Lithium Iron Phosphate Battery (LiFePO4 battery) or LFP Battery (lithium ferrophosphate), is a type of lithium-ion battery using LiFePO4 as the cathode material (on a battery this is the positive side), and a graphitic carbon electrode with a metallic backing as the anode. Cylindrical lithium cells are used for high specific energy density and good mechanical stability. Li-ion batteries have a higher energy density when compared to other rechargeable batteries. Li-ion batteries are composed of four main components namely cathode, anode, electrolyte, and separator. Lithium-ion battery generates electricity because of continuous reactions of lithium Li-ion Batteries have high power capacity without being too bulky. Lithium ion batteries are thus used in electronic equipment like mobile phones and laptops, which need to operate longer between charges while consuming more power and need batteries with a much higher energy density. Memory effect refers to as the process of losing maximum energy capacity of rechargeable batteries due to repeated recharges after being only partially discharged. They are used in telecommunication equipment, instruments, portable radios and TVs, pagers. They are used to operate laptop computers and mobile phones and aerospace application. Also used in electric vehicles, cell phones, camcorders, lap-top and palmtop computers, portable electronic devices, etc. The li-ion batteries are used in cameras, calculators; they are used in cardiac pacemakers and other implantable device. They are used in telecommunication equipment, instruments, portable radios and TVs, pagers. The lithium iron phosphate batteries market, by application, is segmented on the basis of the end-users it caters. The portable segment was the largest market in 2018 owing to its increased demand from the automotive sector, which is the major demand-generating industry for lithium iron phosphate batteries. The market for lithium-ion battery in India is expected to grow at a CAGR of 34. 8% during the forecast period of 2019 – 2024. In addition to it, the lithium-ion battery has comfortable rechargeable property, lightweight, long-lasting; thus, it perfectly contributes to the electric vehicle market to grow in the forecast period. Thus, due to demand it is best to invest in this project. Few Indian major players • BYD Company Ltd. • A123 Systems LLC, • K2 Energy • Electric Vehicle Power System Technology Co., Ltd. • Bharat Power Solutions
Plant capacity: 25000 nos/dayPlant & machinery: Rs. 3618 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 4626 Lakhs
Return: 25.00%Break even: 39.00%
Add to Inquiry Add to Inquiry Basket

Production of Lithium Ion (LiFePO4) Cell batteries for electric vehicles

In today's portable electronics, two types of batteries are used: lithium-ion and lithium iron phosphate. Although they have some similarities, the high energy density, long life cycles, and protection of both are significant differences. The majority of people are familiar with lithium-ion batteries since they own a smartphone, tablet, or computer. Lithium iron phosphate is a newer type of battery that is gaining popularity in the manufacturing industry due to its low cost materials and high temperature stability. Related books:- Automobile Industry, Automotive Components & Allied Products Engine Parts, Piston, Pin, Piston Ring, Valve, Control Cable, Engine Mounting, Auto Lock, Disc Brake, Drum, Gear, Leaf Spring, Shock Absorber, Silencer, Chain, Cylinder Block, Chassis, Battery Advantages of Lithium Ion (LiFePO4) Cell batteries High energy density paves the way for even greater capacities. When fresh, there is no need to prime it for a long time. All that is required is a single daily fee. Self-discharge is less than half that of nickel-based batteries, suggesting that they have a poor self-discharge. Low Maintenance: There is no need for a periodic discharge, and there is no memory. Specialty cells can provide a large amount of current to applications like power tools. Lithium Ion (LiFePO4) Cell manufacturing process Cathode, anode, electrolyte, and separator are the four primary components of Li-ion batteries. The continuous reactions of lithium in a lithium-ion battery produce electricity. Cathode A Li-ion battery's power and voltage are determined by its cathode. Since lithium is unstable in its element form, the cathode of a Li-ion battery is lithium oxide. The frame of the cathode is held together by a thin aluminium foil, which is coated with a paste made up of active material, conductive additive, and a binder. Related project: - Lithium Ion Battery Anode The anode is also coated with an active material that allows for the reversible absorption or emission of lithium ions released from the cathode while also allowing for the flow of electric current through the external circuit. Lithium ions are contained in the anode rather than the cathode when the battery is charged. Lithium ions migrate back to the cathode via the electrolyte as the conducting wire binds the cathode to the anode in the discharge state, and electrons are isolated from lithium ions and travel along the wire, producing electricity. Electrolyte The electrolyte in a Li-Ion Battery allows the transfer of lithium ions between the cathode and the anode, as well as the movement of electrons through the wire. To allow the movement of lithium ions, an electrolyte is usually made up of chemicals with high ionic conductivity. Separator The cathode and anode determine the battery's basic efficiency, while the electrolyte and separator determine the battery's safety. By holding the cathode and anode separate, the separator serves as a physical barrier. It also prevents electrons from flowing directly through the internal microscopic hole, allowing only lithium ions to pass through. Synthetic resins such as polyethylene (PE) and polypropylene (PP) are widely used in commercialized separators (PP). Market outlook The demand for lithium iron phosphate batteries in North America, Europe, Asia-Pacific, Latin America, and the Middle East and Africa. North America is divided into three parts: the United States, Canada, and Mexico. Germany, the United Kingdom, Italy, France, and the rest of Europe make up Europe. China, India, Japan, and the Rest of Asia-Pacific make up Asia-Pacific. Because of its proven automotive sector and rising consumer electronics demand, Asia-Pacific dominated the global market. From 2020 to 2027, the global lithium iron phosphate battery market is projected to expand at a compound annual growth rate (CAGR) of 15.2 percent. Related videos: - Renewable Energy Sector, Green Power, Solar Energy, Biofuel, Hydroelectric, Wind, Non-conventional Energy, New and Renewable Energy Govt policies On November 11, 2020, the government approved the production-linked incentive (PLI) scheme in advance chemistry cell (ACC) battery manufacturing, as well as 10 other industries. The battery strategy of the scheme aims to make producers more internationally competitive, increase exports, achieve economies of scale, and develop cutting-edge goods. This is part of an attempt to encourage the use of electric vehicles (EVs), which have been hindered in India by high battery costs and a lack of supporting infrastructure. Battery imports account for more than half of the cost of an electric vehicle in India. The government has suggested that local manufacturing facilities be built in order to minimize costs and promote competition. The government has made it clear that it wants to drive India toward clean energy and transportation, as evidenced by the ambitious target of 450 GW of renewable energy production by 2020. Apart from promoting EVs, there has been a notable drive for renewable energy to be available around the clock, which includes energy storage like ACC batteries. Market Research; - Market Research Report The proposed battery policy is output-based rather than input-based, which is one of the scheme's key features. The subsidy is based on the amount of production generated and the amount of value added by private businesses. Only private companies would be eligible for a government subsidy if they reach a 60 percent value addition within five years of the project's start date, which is when full-scale development is planned. Any new technology that emerges in the next ten years will be eligible for a subsidy as well. Next, the government has set aside 570 billion (US$7.7 billion) for the car industry over the next five years as part of the programme. In reality, ACC manufacturing industries have been allocated 180 billion (US$2.4 billion) in advance. The government would pay the producer a fixed subsidy (as determined by the private entity's bid) for a period of ten years, subject to discounting over time. Economies of scale and lower production prices will be factored into the discounting. Key Players:- • BYD Company Ltd. • A123 Systems LLC, • K2 Energy • Electric Vehicle Power System Technology Co., Ltd. • Bharat Power Solutions • OptimumNano Energy Co., Ltd. • LiFeBATT, Inc. Related Projects: - Renewable Energy, Non-conventional Energy, Solar Energy, Biofuel, Biomass Projects Tags:- #LithiumIonBattery #LithiumIonBatteryProduction #LithiumIonBatteryIndustry #LithiumIonBatteryManufacturing #ElectricVehicles #ElectricVehiclesIndustry #ElectricVehiclesProduction #ElectricalIndustry #ElectricIndustry #RenewablePower #DetailedProjectReport #businessconsultant #BusinessPlan #feasibilityReport #NPCS #entrepreneurindia #startupbusiness #ProjectReport #startup #projectconsultancy #businessopportunity #IndustryDemands #profitablebusiness #ManufacturingBusiness
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Production of Micronutrients Fertilizer. Most Profitable Industries to Launch Startups.

Introduction: Nutrients are needed for the survival of all living things. Plants, too, require vital nutrients in order to complete their life cycle. Carbon, Hydrogen, and Oxygen are all naturally occurring elements that are not supplied to plants. Major nutrients such as nitrogen, phosphorus, and potassium are needed in greater amounts by plants and must be supplied on a regular basis. Calcium, Magnesium, and Sulphur are secondary nutrients that are needed in smaller amounts than main nutrients. Micronutrient Fertilizer is required in very limited amounts by plants and plays an important role in their physiology. Related projects:- Disinfectants, Pesticides, Insecticides, Mosquito Repellents, Destroyers, Phenyl, Fertilizer, Fungicides, Herbicides, Plant Regulator, Plant Growth Regulator, Mixture, Intermediates, Agrochemicals, Bio Stimulate, Growth Activator, Organic Pesticides Zinc [Zn], Boron [Bo], Iron [Fe], Manganese [Mn], Copper [Cu], Molybdenum [Mo], Silicon [Si], Nickel [Ni], Cobalt [Co], and Sodium [Na] are all micronutrients. Plant micronutrients play an important role in flower initiation, fertilization, fruit set, and disease resistance. Sulfates are the most common micronutrient fertilizer sources for Zn, Cu, and Mn, but chelates are the most common Fe source, and borax and sodium molybdate are used for B and Mo, respectively. The soil property that has the greatest effect on micronutrient availability is soil pH, and for all but Mo, the higher the pH, the lower the plant availability. Liming, according to Mo, will potentially avoid deficiencies. Organic matter content, particularly for Cu, oxidation/reduction conditions, especially for Fe and Mn, soil texture, Fe and Al oxide content, and soil moisture conditions are also essential in bioavailability. Uses and Types of Micronutrients: We're all familiar with the basic nutrients for plants: nitrogen, phosphorous, potassium, magnesium, calcium, and sulphur. They're known as macronutrients. However, there is a long list of plant micronutrients that are also important for the health of your plants in far smaller amounts. These micronutrients, such as boron, iron, zinc, and others, not only promote healthy growth, but also aid in the fight against pests and diseases in your garden. Related Books:- Biofertilizer, Biofertiliser, Biogas, Organic Farming, Vermicompost, Vermiculture, Biotechnology Adding organic compost to your garden soil is the safest long-term way to keep it rich in the micronutrients it needs. Compostable materials such as grass clippings, leaves, plant trimmings, and table scraps already contain a variety of micronutrients. Their presence in your compost means that certain micronutrients are returned to the soil. Many regions have increased their use of micronutrients as a result of increased information gained over the last 25 years about plant requirements, sources, and the most successful methods of applying them. Higher crop yields, which are generally the product of higher NPK fertilizer prices, can also result in increased micronutrient requirements. Furthermore, the rapid change in the tropics to higher-analysis fertilizers like urea, triple superphosphate, and ammonium phosphate has reduced the amount of micronutrients added to the soil as fertilizer contaminants. Micronutrients are small amounts of basic elements used by plants. Crop absorption of most micronutrients is less than one pound per acre. Despite this low requirement, if micronutrients are not available, essential plant functions are hampered, resulting in plant abnormalities, reduced growth, and lower yield. In such situations, costly, high-demand crop inputs like nitrogen and water can be squandered. Growers are evaluating all possible obstacles to top grain production, including micronutrient shortages, as a result of higher yields, higher commodity prices, and higher crop input costs. Related project:- Micronutrients Fertilizer Production Process: By simply mixing the process with the right formula, a specific fertilizer grade of mixed micronutrients can be created. Micronutrients are divided into two categories based on their use. The one for foliar spray is different from the one for soil application. Micronutrients are essential for providing healthy nutrition to plants, and a lack of them can limit crop growth. One of the major factors driving the market's growth is the increasing occurrence of micronutrient deficiencies in soils around the world. Market Outlook: The Global Micronutrient Fertilizers Market is expected to expand at a rate of 10.2% over the next five years. However, the prevalence of micronutrients in soil is now decreasing at a faster rate, allowing for their artificial addition. This is where the micronutrient fertilizer industry has a lot of space to develop. The global Micronutrients Fertilizers market has the following segments based on the type: Boron, Copper, Iron, Manganese, Molybdenum, Zinc, and Others. The increase in soil degradation due to extensive cultivation and shrinking farmland will drive the micronutrient fertilizers market. Based on type, the global Micronutrients Fertilizers market is segmented into the following categories: Boron, Copper, Iron, Manganese, Molybdenum, Zinc, and Others. The demand for micronutrient fertilizers would be motivated by a rise in soil depletion due to intensive agriculture and diminishing farmland. Furthermore, rising demand for high-value crops such as fruits and vegetables would drive up demand for micronutrient fertilizers. The micronutrient fertilizers market is likely to be hindered by limited product availability. Related Videos:- Fertilizers, Biofertilizer, Inorganic Fertilizers (Mineral Fertilizer), NPK, Nitrogen Fertilizer, Nitrogenous Fertilizer, Diammonium Phosphate Projects Increased agricultural investment in developed countries, on the other hand, would open up opportunities for the micronutrient fertilizer industry. Based on feature, the global market for micronutrient fertilizers is divided into the following segments: soil, foliar, fertigation, and others. The agricultural micronutrients market is expected to expand due to factors such as increasing soil micronutrient deficiencies and rising awareness about food security. In terms of both value and volume, Asia-Pacific was the largest market for crop micronutrients. The rising demand for high-quality food, as well as farmers' increased awareness and acceptance of micronutrients, are some of the major factors driving the crop micronutrients market in Asia Pacific. Furthermore, the crop micronutrients market in this area is expected to be driven by an increase in agricultural practices and the demand for high-quality agricultural produce. Government Policy Micronutrients Fertilizers: India is a zinc-deficient country, according to an ICAR report under the Ministry of Agriculture and Farmers Welfare, with about 37% of soil samples analyzed for accessible zinc being found deficient. Owing to zinc deficiency, the World Health Organization (WHO) estimates that about 800,000 people die each year as a result of zinc deficiency, with 450,000 of them being children under the age of five. Low zinc intake could affect 60-70 percent of the population in Asia and Sub-Saharan Africa, according to estimates. Profile- Project Reports & Profiles This amounts to about 2 billion people in Asia and 400 million people in Sub-Saharan Africa in absolute terms. Zinc malnutrition has resulted from widespread zinc deficiency in humans, especially in developing countries like India. This has drew the attention of India's government and politicians, raising consciousness about the value of zinc in human health. In terms of fertilizer policy, the position of zinc was targeted through an Rs 500 per ton additional subsidy under the Nutrient Based Subsidy (NBS) Scheme, which was launched in 2010. Under the National Food Security Mission (NFSM), the government is actively promoting the use of zinc by providing farmers with an additional subsidy of Rs 500 per hectare for using micronutrients, including zinc fertilizers. Big fertilizer companies are also making forays into the zinc fertilizer market in India. Key Players: 1. Abellon Agrisciences Ltd. 2. Agro Extracts Ltd. 3. Aries Agro Ltd 4. Bayer Cropscience Ltd. 5. Champion Agro Ltd. 6. Coromandel Agro Products & Oils Ltd. 7. Good Value Mktg. Co. Ltd. For More Details:- https://www.niir.org/profile-project-reports/profile/2890/micronutrients-fertilizer.html
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Emerging Business of Industrial Gases (Industrial Gases Market Size is expected to Rise Significantly) Start the Production Plant of Oxygen and Nitrogen Gas

Introduction: Industrial gases are used in a variety of industries and are gaseous at room temperature and pressure. Chemicals, electricity, medicine, electronics, aerospace, and even food are among these industries. These gases, as useful as they are, can be flammable and pose other risks. Gases, liquids, and cryogenic liquids are all possible uses for industrial gases. They are commonly accepted by industrial users as gases that are used in significant quantities in their pure form. No animal can survive without oxygen, which is a natural resource. Fish and other marine organisms depend on oxygen gas dissolved in water in the same way as humans do. Another money-saving option is an oxygen plant that includes a molecular screen battery drier device for moisture and carbon dioxide separation. It removes acetylene and other hydrocarbons from the process air, removing the need for separate acetylene absorbents and, more importantly, the expense of caustic soda. Related Projects: Oxygen and Nitrogen Gas Plant (Medical and Industrial Grade) Nitrogen gas is an inert gas that can be found in abundance in nature, both free and as part of industrially important compounds. Nitrogen gas is colourless, odourless, and tasteless, as well as being inert. These characteristics make it suitable for use in a variety of manufacturing processes, but they also make it a potential safety hazard for workers. As a result, nitrogen gas producers and consumers must take sufficient nitrogen safety measures. The chemical element nitrogen has the symbol N and the atomic number 7. Nitrogen is the lightest element of Periodic Group 15, also known as the pnictogens. It is a common factor in the universe, with a total abundance estimated to be about seventh in the Milky Way and Solar System. Two atoms of the element join together at normal temperature and pressure to form dinitrogen, a colourless and odourless diatomic gas with the formula N2. Uses of Oxygen and Nitrogen Gas Plant: The industrial and medical gases industries represent a sizable number of customers in the city. Industrial gases are needed in almost all manufacturing processes. In the essential and infrastructure sectors, large amounts of oxygen, nitrogen, and argon are used. For cutting and welding, shipyards and the automotive industry use acetylene, propane, and mixtures of fuel gases and oxygen. In the recycling of plastics, packaging, and scrap tyres, liquid nitrogen is important. All major industrial gases are used as a raw material or for inerting in the chemical industry. Cylinder gas and mixtures make up the other smaller industry group. In steelmaking, oxygen is needed for the reaction that converts carbon to carbon dioxide gas, which occurs at high temperatures in a blast furnace. The carbon dioxide emitted enables iron oxides to be reduced to more pure iron compounds. Other applications that include metal and require high temperatures, such as welding torches, use oxygen. Hydrocarbon molecules are broken apart by heating, and oxygen is used to degrade them. This is used to generate combustion, which produces water and carbon dioxide in most cases, but also the hydrocarbons acetylene, propylene, and ethylene in some cases. Nitrogen gas is used by some factories on a daily basis in remote areas. Related Project: Oxygen and Nitrogen Gas Plant Due to safety concerns and time delays, delivering liquid nitrogen to these locations is not feasible. It is important for industries such as chemical production, offshore drilling, and some pharmaceutical firms to have on-site nitrogen. On-site nitrogen generation not only ensures a consistent nitrogen solution, but it also helps these industries to adjust their purity levels depending on the application. The importance of nitrogen as a purging gas in the steel industry cannot be overstated. It's used as an assist gas to blast molten material away, resulting in a better, corrosion-resistant stainless or aluminized steel product. When formation pressures start to dwindle, nitrogen produced by various standard methods can be injected into an oil reservoir as an enhanced oil recovery technique. These secondary recovery strategies can restore and extend the life of well-produced goods. Manufacturing of Oxygen and Nitrogen Gas Plant: Compressed oxygen, liquid oxygen, and nitrogen are the four materials. d) All liquid nitrogen is extracted in the same plant from air. The raw material, air, is cryogenically liquefied, and the liquid oxygen and liquid nitrogen components are separated in a fractional distillation column. Compressors / pumps bottle compressed oxygen and nitrogen gases into cylinders. After vaporisation of the respective liquid fractions, compressed oxygen and nitrogen gases are bottled into cylinders by compressors / pumps. The air is compressed to a pressure of 30kg/cm2 in three steps. Following that, water vapour and carbon dioxide are removed using a battery of molecular sieves. The carbon dioxide and water vapor-free air is compressed still more to a pressure. External refrigeration is used to compress the outgoing carbon dioxide and water vapour free air to a pressure of 100 kg/cm2 and cool it significantly. The outgoing product gases cool the high-pressure air even further in heat exchangers. The majority of the cold air is allowed to expand via an expansion motor, while the remainder is redirected via an expansion valve. The expansion engine's downstream air reaches a pressure of 5 kg/cm2 and a significantly lower temperature. Partially liquefaction of air occurs when the other stream of air passing through the expansion valve is extended to a pressure of 5kg/cm2. Related Videos: Industrial, Medical and Specialty Gases Manufacturing Project Ideas Both streams of air are combined and added to the bottom column of the double rectification column as a liquid vapour mixture (fractional Distillation Column). Because of mass and heat transfer at each perforated tray in the column, nitrogen-rich liquid vapour collects at the top trays, while an oxygen-rich liquid-vapor mixture collects at the bottom trays. The liquid nitrogen that has accumulated at the top of the bottom column is drawn out and stored in vacuum-insulated cryogenic tanks as a product. This liquid nitrogen is pumped from the storage tank via vaporizers for gasification and bottling into cylinders to produce nitrogen gas. The oxygen-rich liquid-vapor mixture at the bottom column's sump is redirected to the distillation column's top column, which operates at a lower pressure of 0.5kg/cm2. Further separation of oxygen and nitrogen vapour occurs in this low-pressure column through a mass and heat transfer process at the various trays inside the column. Related Books: - BOOKS & DATABASES Due to heat exchange with the cooler liquid nitrogen produced at the top of the bottom column, the separated oxygen vapours settle at the bottom of this column and condense to form liquid oxygen. The liquid oxygen that has accumulated at the bottom of the top column is extracted as a result and stored in vacuum-insulated cryogenic tanks. This liquid oxygen can be vaporised by heat exchange between incoming process airs and compressed by oxygen compressors for bottling into cylinders to produce compressed oxygen. Alternatively, the stored liquid oxygen may be pumped into vaporizers for gasification and cylinder filling. The plant's processing modes can be changed to produce: 1) Liquid nitrogen and compressed oxygen, with in-built vaporizers filling compressed oxygen, or 2) Liquid oxygen only, with external vaporizers filling compressed oxygen, depending on requirements. Market Outlook: The rising demand for alternative energy sources is driving the growth of the industrial gases industry. Furthermore, the global industrial gases market is being driven by increasing demand for industrial gases in the health care sector. In the other side, the government is strict. Its business development is being hampered by laws and regulations relating to environmental emissions and safety concerns. At a compound annual growth rate (CAGR) of -0.9 percent, the global industrial gas demand is forecast to decrease from $101.8 billion in 2019 to $100.9 billion in 2020. The industrial gases industry is expanding due to growing demand for renewable energy sources. Furthermore, rising demand for industrial gases in the health-care sector is driving the global industrial gases market. The government, on the other hand, is strict. However, the industrial gases industry is capital-intensive and needs significant investment, which may be a limiting factor in the market's growth. The global industrial gases market has a plethora of growth prospects in emerging economies. Increasing Demand of Oxygen Gas Due to Covid-19: The COVID-19 epidemic resulted in a major rise in global demand for medical oxygen. The rising prevalence of chronic diseases and infectious diseases such as Covid-19, cancer, asthma, diabetes, heart attack, and others, as well as an increase in the global geriatric population, are driving the medical oxygen gas cylinders industry. The compressed oxygen gas in commercial oxygen gas cylinders is used for medical purposes. Patients suffering from illnesses such as asthma, cancer, and others benefit greatly from medical oxygen gas cylinders. The primary goal of an oxygen cylinder is to keep the body supplied with pure oxygen. Oxygen cylinders are in high demand in hospitals, home care settings, and other places. With the number of Covid-19 cases in the electricity approaching 19,000, demand for oxygen has increased as a result of patients needing breathing assistance due to the disease's lung complications. Now is the time to put medical oxygen first. Oxygen should be viewed as a critical utility, much like electricity. Key Players: • Air Liquide India Holding Pvt. Ltd. • Arrow Oxygen Ltd. • Bellary Oxygen Co. Pvt. Ltd. • Bhagawati Oxygen Ltd. • Bhilai Oxygen Ltd. • Govind Poy Oxygen Ltd. • Howrah Gases Ltd. • Linde India Ltd. • Madhav Industrial Gases Pvt. Ltd. • Niket Udyog Ltd. • Praxair India Pvt. Ltd. • Pushya Industrial Gases Ltd. • Rukmani Metals & Gaseous Pvt. Ltd. • Saraogi Oxygen Ltd. • Southern Gas Ltd. • Travancore Oxygen Ltd. For More Details: https://niir.org/profile-project-reports/profiles/industrial-gases-projects/z,,23,0,a/index.html
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Solar Panel

Solar panel refers either to a photovoltaic module, a solar thermal energy panel, or to a set of solar photovoltaic (PV) modules electrically connected and mounted on a supporting structure. A PV module is a packaged, connected assembly of solar cells. Solar panels can be used as a component of a larger photovoltaic system to generate and supply electricity in commercial and residential applications. Each module is rated by its DC output power under standard test conditions (STC), and typically ranges from 100 to 320 watts. The efficiency of a module determines the area of a module given the same rated output - an 8% efficient 230 watt module will have twice the area of a 16% efficient 230 watt module. The technology behind solar is relatively old, despite their futuristic appeal, but while the basics are the same the efficiency of solar panels has improved greatly in recent years. It’s worth noting that solar panel suppliers often have two types of solar panels on offer: thermal panels and photovoltaic (PV) panels. The former are used only to heat water. The electricity produced by solar panels will be used to power any appliances currently in use within home. Any electricity which is not used will be sent to the grid. India has abundant solar resources, as it receives about 3000 hours of sunshine every year, equivalent to over 5,000 trillion kWh. India can easily utilize the solar energy. Today the Government is encouraging generation of electricity from various renewable energy sources such as wind, solar, small hydro, biomass by giving various fiscal & financial incentives. This apart, the state governments are procuring electricity from renewable energy projects at preferential tariff. Multiple solar cells in an integrated group, all oriented in one plane, constitute a solar photovoltaic panel or solar photovoltaic module. Photovoltaic modules often have a sheet of glass on the sun-facing side, allowing light to pass while protecting the semiconductor wafers. Solar cells are usually connected in series in modules, creating an additive voltage. Connecting cells in parallel yields a higher current; however, problems such as shadow effects can shut down the weaker (less illuminated) parallel string (a number of series connected cells) causing substantial power loss and possible damage because of the reverse bias applied to the shadowed cells by their illuminated partners. Solar panels can be used to generate a portion of home’s power in order to reduce dependency on traditional power sources. For instance, install panels to provide electricity just for appliances or lighting, to reduce dependency on the utility company, as well as lower bill. Solar modules use light energy (photons) from the sun to generate electricity through the photovoltaic effect. The majority of modules use wafer-based crystalline silicon cells or thin-film cells based on cadmium telluride or silicon. The structural (load carrying) member of a module can either be the top layer or the back layer. Cells must also be protected from mechanical damage and moisture. The solar contribution stood at 5.44% as of 2018. Major factors driving the market studied are the declining cost of the solar module and the government policies like allowing 100% FDI under automatic route for renewable power generation and distribution projects which is expected to increase the participation from global players into the Indian market. With government promoting the solar installation in rural area by providing subsidized solar panels and other incentive, the solar PV installation is ought to increase during the forecast period and is expected to drive the market. So far, only five CSP projects, namely, ACME solar tower (2.5 MW), Dhursar (125 MW), Godawari solar project (50 MW), Megha solar plant (50 MW), and national solar thermal power facility (1 MW) have started operations in India. Owing to factors, such as, huge capital expenditure, difficulty in securing land and water, and insufficient DNI data, other projects have been delayed. India solar power products market is projected to grow at a CAGR of more than 11% to surpass $ 7.6 billion by 2024 on the back of increasingly stringent policy and regulatory framework and rising environmental concerns. The Ministry of New and Renewable Energy has set a target of 100 GW of solar power generation capacity by 2022. To achieve the target, government has taken several initiatives in the form of offering subsidies, financial assistance, and incentives to manufacturers, power producers and even customers. The global solar panel market volume reached 155.5 GW in 2019. A solar panel, also known as a PV panel, is a collection of solar (or photovoltaic) cells that employ natural sunlight to generate electricity. It is made of several solar cells, manufactured using silicon, boron, and phosphorus, which are arranged in a grid-like pattern on the surface. The utilization of solar panels has increased across the globe as they do not lead to any form of pollution and their installation helps in combating the harmful emissions of greenhouse gases. Also, innovations in quantum physics and nanotechnology are projected to increase their effectiveness potentially. They are superior to conventional solar panels in terms of efficiency and cost-effectiveness. They can also be integrated into almost any surface, which will further boost their applicability across various sectors. On account of these factors, the market to sustain positive growth over the forecast period (2020-2025). As a whole there is a good scope for new entrepreneur to invest in this business. Few Indian Major Players • Dhursar Solar Power Pvt. Ltd. • Divine Solren Pvt. Ltd. • Ind Renewable Energy Ltd. • Indira Power Pvt. Ltd. • Janardan Wind Energy Pvt. Ltd. • Kiran Solar One Pvt. Ltd. • Laxmi Agroenergy Pvt. Ltd.
Plant capacity: 33 KW per dayPlant & machinery: 181 Lakhs
Working capital: -T.C.I: Cost of Project:668 Lakhs
Return: 28.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Set up a Manufacturing Plant of Transformer Oil from Base Oil. Opportunities in Petroleum Business.

Introduction: Transformer oil, also known as insulating oil, is a high-temperature stable oil with excellent electrical insulating properties. It's used in oil-filled transformers, high-voltage capacitors of various forms, fluorescent lamp ballasts, and high-voltage switches and circuit breakers. The oil analysis is the ultimate starting point for any transformer evaluation. It's an essential predictor of good health, much like blood tests in humans. Its functions include insulation, suppression of corona discharge and arcing, and cooling. Mineral oil is the most common base for transformer oil, but alternative formulations with improved engineering or environmental properties are gaining traction. Related Projects: - Transformer, Distribution Transformer, Electrical Transformer, Current Transformers, Voltage Stabilizers, Servo Controlled Stabilizer, UPS, Inverter, Power Inverters, Transformer Oil and Repair of Distribution, Power Transformer Transformer oils are extremely susceptible to contamination by water or other contaminants. Contamination of transformer oils by water, soil, or fibres results in a significant loss of electrical properties. Dust particles and textile fibres absorb moisture and orient themselves in an orientation or bridge to the associated high and low voltage sides, causing ‘arcing' and dielectric breakdown. When a transformer is in use, the oil is subjected to electrical and mechanical stresses. Chemical interactions with windings and other solid insulation, catalyzed by high operating temperatures, often cause contamination. Base Oil: Base oils are used to make lubricating greases, engine oil, and metal processing fluids, among other things. Different goods necessitate different oil compositions and properties. The viscosity of the liquid at different temperatures is one of the most significant factors. The concentration of base oil molecules, as well as how easily these can be removed, determine whether or not a crude oil is appropriate for making into a base oil. Related Books: - Petroleum, Greases, Petrochemicals, Lubricants The process of refining crude oil yields base oil. This refers to the heating of crude oil in order to distinguish different distillates from one another. Light and heavy hydrocarbons are separated during the heating process; the lighter ones can be processed to produce petrol and other fuels, while the heavier ones can be used to make bitumen and base oils. Uses of Transformer Oil: Insulating oil, also known as transformer oil, is an oil that stays stable at high temperatures. It's used in oil-filled transformers because of its high electrical insulating properties. It is a liquid insulation that is used in electrical power transformers to absorb heat produced by the transformers. Transformer oil serves a variety of purposes, the most important of which are high insulating and cooling properties. Transformer oil is a mineral-based oil with chemical properties and dielectric strength that is widely used in transformers. This oil serves as an insulator and a cooling agent in transformers. This high-temperature, high-resistance oil, also known as transformer oil or insulating oil, is used in many of the products that hold our modern world afloat. Transformer oil serves a variety of purposes, the most important of which is to protect transformers. Production Process: Dielectric Insulation or Transformer Oil Hydro finished base oils of group II + can be used to make oil and other oils for electrical machinery and installations. The base stocks are chosen based on the user's viscosity requirements. Pour point is also a crucial property for base oil selection in colder countries. Related Videos: - Petroleum and Petroleum Products Transformer oils are extremely susceptible to contamination by water or other contaminants. Contamination of transformer oils by water, soil, or fibres results in a significant loss of electrical properties. Dust particles and textile fibres absorb moisture and orient themselves in an orientation or bridge to the associated high and low voltage sides, causing ‘arcing' and dielectric breakdown. Though major breakdowns are uncommon and usually result in machine failure, small local arcs are common. It does not harm the system right away, but it does harm to the oil. Market Outlook: The global market for transformer oil is projected to rise at an annual rate of 8.3% until 2022, owing to increased demand from the power industry's transmission and distribution segment. The global transformer oil market was valued at USD 1.56 billion in 2016 and is projected to rise at an 11.5 percent annual rate between 2017 and 2025. Transformer oil products are in high demand due to the need to improve rural and urban infrastructure. Increased demand for electricity in developing and developed countries, as well as increased infrastructure spending for energy access, would drive the global transformer oil market. Because of the growing demand for new transformers, the growth of transformer oil manufacturers will be faster in emerging markets. Transformer oils are electrical insulating oils that are stable at high temperatures and serve two essential roles in a transformer: arc suppression and heat dissipation. Market Research: - Market Research Report Transformer oil's ability to perform these functions is primarily responsible for its acceptance, which drives market growth. One of the factors driving the transformer oil market's growth is its resistance to oxidation. Other important factors driving transformer oil market share include rural electrification, power grid expansion, and increased investment in the petrochemical industry. Transformer oil, also known as insulating oil, is an oil that has excellent insulating properties and is used in transformers. Transformer oil's primary purpose is to cool and insulate a transformer. Transformer oil has a high dielectric strength and temperature stability. Switchgears and circuit breakers, as well as distribution and power transformers, use transformer oil. Key Players: 1. BASF SE 2. Dairen Chemical Corporation 3. Nynas AB 4. Ergon Inc. 5. Valvoline 6. PetroChina Company Ltd 7. Sinopec Corporation 8. Cargill Inc. For More Details: https://www.entrepreneurindia.co/project-and-profile-listing?CatId=92&SubCatId=92&CatName=Transformer,%20Distribution%20Transformer
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start a Manufacturing Unit of Solar Panel. The Renewable-Energy Business is Expected to Keep High Growth.

Solar panels are solar panels that capture the sun's rays and convert them to power or heat. Solar panels are made up of solar (or photovoltaic) cells that can be used to generate power via the photovoltaic effect. On the surface of solar panels, these cells are organized in a grid-like arrangement. As a result, it can alternatively be described as a collection of photovoltaic modules put on a supporting framework. A photovoltaic (PV) module is a 610 solar cell packaged and linked assembly. Because solar panels are made up of microscopic photovoltaic cells that are linked together, PV stands for "photovoltaic." Semiconducting material is used to make PV cells. — With silicone being the most popular. PV cells are typically small, but when combined to make solar panels and arrays, they can be extremely efficient. Related Projects: Renewable Energy Sector, Green Power, Solar Energy, Biofuel, Hydroelectric, Wind, Geothermal, Biomass, Non-conventional Energy, New and Renewable Energy Projects An electric field is formed when the sun shines on the cells. Electric energy is produced in proportion to the strength of the sun. Despite this, the cells do not require direct sunlight to function and may create electricity. PV panels can be divided into three categories: household solar pv panels, commercial solar pv panels, and industrial solar pv panels. 1. PV panels using monocrystalline crystals 2. PV panels made of polycrystalline crystals 3. Thin-film photovoltaic panels Uses of Solar Panel: Solar panels (also known as "PV panels") convert sunlight, which is made up of energy-bearing particles known as "photons," into electricity that may be utilized to power electrical loads. Solar panels can be used for a variety of purposes, including remote power systems for cabins, as well as a range of other things. Telecommunications equipment, remote sensing, and, of course, the production of electricity by solar electric systems for personal and commercial use. Photovoltaic modules employ the photovoltaic effect to create electricity from light energy (photons) from the Sun. Wafer-based crystalline silicon cells or thin-film cells are used in the majority of modules. Related Videos: Renewable Energy Sector, Green Power, Solar Energy, Biofuel, Hydroelectric, Wind, Non-conventional Energy, New and Renewable Energy The top layer or the back layer of a module can be the structural (load-bearing) member. Mechanical and moisture damage to cells must be avoided. The majority of modules are rigid, but thin-film cells-based semi-flexible modules are also available. Photovoltaic panels It is possible to generate electricity. This procedure can be carried out on a small or large scale. When it comes to powering your home, a domestic solar power system can help. Solar panels are used to give electricity to the people on a large scale. Engineers in this example erect a big solar array to create a solar power station. Manufacturing Process: 1. Cell Cutting: Cells are carved out using a laser cutting machine. The size of a cell is governed by the wattage that the panels require. This step is avoided for modules with a full cell size. 2. Stringing Procedure: The stringing process is totally automated. The upper (Blue/Black) Sun-facing side is negative, whereas the lower (White) side is positive. 3. Solar Glass: After the cells are strung together, the machine transfers them to tempered glass with an ethylene vinyl acetate (EVA) encapsulation layer. 4. Visual Inspection: A technician examines the cells for any faults or errors in the strings. 5. Taping: A technician tapes the cells into a matrix alignment during taping. 6. Soldering: After that, the connections are soldered together. Any extra material is removed. 7. Insulate Module Connections: The next step is to use a back sheet and EVA encapsulation to insulate the connections. This procedure safeguards the module against dust and moisture. 8. Mirror Inspection: The module is visually inspected once more for dust particles, color mismatches, and other issues. 9. EI Testing: EI Testing, also known as Electroluminescence Testing, is the actual testing of the module. It's a kind of scanning technique in which the module is scanned in an EI machine. Profile- Project Reports & Profiles 10. Lamination: The module is laminated at a temperature of 140 degrees Celsius. This procedure takes about 20 minutes. After lamination, the modules are allowed to cool for 10-15 minutes until they reach room temperature. 11. Trimming the Back Sheet: To manufacture correctly shaped modules, this step entails cutting off the surplus material from the back sheet. 12. Frame Cutting: Frames of various widths are carved out for bordering the panels in this stage. 13. Punching Holes in the Frames: Holes are punched in the frames for mounting and grounding the panels. 14. Filling/Framing with Sealant: A sealant protects the panels from air, dust, and moisture while also assisting the module's secure attachment to the frame. After the frame has been mounted to the module, it is sent back to the framing machine to be punched to ensure that it is permanently attached to the frame. 15. Attaching the Junction Box: A junction box is fastened to the module using sealant to keep it firmly in place. The connections are then soldered and let to cure for 10-12 hours, ensuring that the structures are completely dry and correctly bonded. 16. Wipe Outside the Module: The module is wiped outside to remove any dust, foreign particles, or excess sealant. 17. Module Testing: The module is attached in order to examine the output current, voltage, and power, among other things. For each module's output data, a report is generated. For the benefit of the users, a black label (with full details) is pasted behind the module. 18. Packing: This is the last phase in the module production process, after Final Quality Assurance (FQA), when the modules are safely packed into huge boxes for shipping and storage. Market Outlook: The global market for solar PV panels was estimated at USD 115.2 billion in 2019, with a compound annual growth rate (CAGR) of 4.3 percent expected from 2020 to 2027. Increased environmental degradation and government incentives and tax refunds to install solar panels are driving the growth of the solar energy business. Furthermore, the reduced water footprint of solar energy systems has boosted their demand in the power generation sector. The market for solar cells has grown significantly as a result of an increase in rooftop installations, followed by an increase in architectural applications. Books: - BOOKS & DATABASES The solar panel market will be driven by rising electricity prices combined with lower-cost solar panels. Rising demand for solar panels in the residential rooftop solar industry, as well as cheap prices for polysilicon and silver used in solar cell manufacture, will help the market accelerate in the coming years. Furthermore, the falling cost of solar panels has prompted governments in a number of countries to take more initiatives and provide subsidies, which is projected to aid the growth of the residential solar panel market. Renewable Energy Industry in India: In the early 1980s, India became the first country in the world to establish a ministry of non-conventional energy resources (Ministry of New and Renewable Energy (MNRE)), and the Solar Energy Corporation of India, one of its public sector organizations, is responsible for the development of the solar energy industry in India. India is one of the countries that produces a significant amount of renewable energy. As of November 27, 2020, renewable energy sources account for 38% of India's installed electricity producing capacity (136 GW out of 373 GW). India's renewable energy business is the world's fourth most appealing renewable energy market. Market Research: - Market Research Report India came in fifth place in wind power, fifth place in solar power, and fourth place in renewable energy. This is the world's greatest renewable energy expansion strategy. Renewable power generation capacity has grown at a rapid pace in recent years, with a CAGR of 17.33% from FY16 to FY20. The sector has grown more appealing to investors as a result of increasing government assistance and improved economics. The country has set a lofty goal of achieving 175 GW of renewable energy capacity by the end of 2022, with the goal of increasing to 450 GW by 2030. Renewable energy will play an essential part as India attempts to fulfill its own energy demand, which is anticipated to reach 15,820 TWh by 2040. Key Players: 1. A M P L Cleantech Pvt. Ltd. 2. Aatash Power Pvt. Ltd. 3. Brightsolar Renewable Energy Pvt. Ltd. 4. Cial Infrastructures Ltd. 5. Cleansolar Renewable Energy Pvt. Ltd. 6. Dhursar Solar Power Pvt. Ltd. 7. Divine Solren Pvt. Ltd. 8. Ind Renewable Energy Ltd. 9. Indira Power Pvt. Ltd. #DetailedProjectReport #businessconsultant #BusinessPlan #feasibilityReport #NPCS #entrepreneurindia #startupbusiness #ProjectReport #startup #projectconsultancy #businessopportunity #SolarPanel #SolarPanelMarket #SolarEnergy #SolarPanelIndustry #SolarCellManufacturing #SolarSector #SolarMarket #RenewableEnergy #solarEnergyBusiness #photovoltaicsystems
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Profitable Industry of Medical Disposables (Gowns & Drapes)

Surgical gowns must be resistant to illnesses and infections while also allowing for reasonable mobility. They must allow for essential mobility while avoiding rubbing and chafing, and they must also be resistant to tearing and lining. They should be snug but not constrictive. The gowns must withstand constant pulls on the fabric during ordinary movements because there is usually surplus fabric. Because hospitals will only store a limited number of gowns, they must be made to fit a variety of body types and sizes with a limited range of sizes. The gowns must help preserve the sterile zone essential for patient safety by controlling microorganisms introduced into the theatre. They must allow for easy donning and doffing without contamination while avoiding any gaps that could allow the barrier to be breached. Gowns must be long-lasting enough to last the garment's intended use life, whether single or multi-use. They should repel fluids while ventilating the surgeon's high body temperature. A surgical drape is a non-woven covering made of disposable material that is used to cover a patient's region. A fenestration (an aperture) in a drape allows the surgeon to execute the procedure. It is available in a variety of sizes, depending on the sort of operation. Drapes differ from one hospital to the next. Surgical drapes are used to keep the operating room clean and bacteria-free. To do this, the adhesive tape must adhere firmly to both the drape material and the patient's skin; its performance cannot be harmed by the method used to sterilise the drape or jeopardised by pre-operation cleaning treatments. The global medical disposable market is predicted to increase at a CAGR of 7% to USD 160 billion by 2023, up from USD 114 million in 2018. Some of the primary factors driving the growth of the global disposable medical market include an increase in hospital visits, an increase in incidences of hospital acquired illnesses, and an increase in patient awareness. The market for surgical drapes and gowns has been divided into three categories: kind, usage pattern, and end user. Surgical drapes and gowns are divided into two types: surgical drapes and surgical gowns. The surgical drapes sector is predicted to be the market's highest share segment. The surgical drapes and gowns market is divided into disposable surgical drapes and gowns and reusable surgical drapes and gowns based on usage patterns. The surgical drapes and gowns market is divided into hospitals, ambulatory surgery centres, and others based on the end user. Thus, due to demand it is best to invest in this project. Few Indian major players 1. Primewear Hygine (India) Product Ltd. 2. Raaj Medisafe India Ltd. 3. Surgeine Healthcare (India) Pvt. Ltd. 4. Vikram Nuvotech India Pvt. Ltd.
Plant capacity: Medical Gowns: 1,250 Pcs per Day Medical Drapes: 1,250 Pcs per DayPlant & machinery: 209 Lakhs
Working capital: -T.C.I: Cost of Project: 529 Lakhs
Return: 30.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

Lucrative Business of Medical Disposables Gowns and Drapes. Investment Opportunities in Medical Supply Business.

Surgical gowns, isolation gowns, surgical isolation gowns, nonsurgical gowns, procedural gowns, and operating room gowns are just a few of the many words that have been used to refer to gowns meant for use in health care settings. Personal protection equipment (PPE) used in health care environments includes medical gowns. When the wearer comes into touch with potentially infectious liquid or solid material, they are utilized to protect the wearer against infection or disease. They may also be used to keep the gown wearer from spreading pathogens that could damage susceptible patients, such as those with compromised immune systems. Gowns are one component of a larger infection-prevention strategy. Related Projects: Surgical, Medical Plastics, Medical Disposables, Disposable Medical Products used in Hospitals Multiple-use or single-use materials are used to make surgical gowns and drapes. Within each of these two main categories, there is a lot of variety in design and performance characteristics, which reflects the essential trade-offs in terms of cost, comfort, and degree of protection for certain surgical procedures. Surgical drapes are used in the operating room to cover the patient's body during surgery to prevent surgical site contamination by separating the surgical site from the rest of the patient's body and nonsterile regions of the surgical table. Surgical drapes come in a variety of shapes, sizes, and therapeutic options. Start a Business in Angola, Click Here Start an Industry in Himachal Pradesh, Click Here Uses of Medical Disposables Gowns and Drapes: Surgical drapes are used during surgery to prevent contact with unprepared surfaces and to keep the environment, equipment, and the patient's surroundings as sterile as possible. Similarly, during surgical procedures, sterile surgical gowns are worn over the operating team's scrub suit to maintain a sterile surgical field and decrease the risk of pathogen transmission to both patients and staff. Multiple-use or single-use materials are used to make surgical gowns and drapes. Surgical drapes that can be reused after cleaning and sterilization, as well as single-use drapes that must be discarded after usage, are available in our online store. Related Books: Disposable Products (Medical, Surgical, Thermocol, Plastic, Paper, Domestic And General Products) - Use and Throw Items, Single Use Items, Disposable Take-Away Packaging, Disposable Items Manufacturing Disposable Gowns Have the Following Benefits: 1. Finishes limit bodily fluid transfer. 2. Prevents bacteria from growing near the surgical site. 3. The colour allows the surgeon to see if the gown has any fluid on it. 4. Production is quick and inexpensive. 5. Tensile strength Start a Business in Bhutan, Click Here Start an Industry in Maharashtra, Click Here Market Outlook: Surgical Drapes and Gowns Market was valued at USD 2.28 billion in 2018 and is expected to increase at a CAGR of 4.42 percent from 2019 to 2026, to reach USD 3.23 billion. The rising number of surgeries and the rising prevalence of hospital-acquired infections are the main drivers of this market's expansion. The increased use of surgical drapes to protect surgeons and patients from surgical site infections is the main driver of this market's growth. Related Videos: Surgical, Medical Plastics, Medical Disposables, Disposable Medical Products used in Hospitals The rising number of chronic diseases and operations, more knowledge of the use of surgical drapes and gowns, and the rising prevalence of hospital-acquired infections are all driving this industry forward. However, the market's expansion will be limited by the reuse of surgical drapes and gowns. Due to the growth of expanding infrastructure, the Asia-Pacific area is predicted to be a profitable market. Increased awareness of chronic diseases and initiatives to promote the use of disposable surgical drapes and gowns are projected to boost the surgical drapes and gowns market size in the near future. Start a Business in Djibouti, Click Here Start an Industry in Puducherry (Pondicherry), Click Here Increasing Demand of Medical Disposables (Gowns and Drapes) Because of Covid-19 Medical gowns are important personal protective equipment (PPE) that keep bacteria and bodily fluids from spreading. Due to shortages, reusable PPE is often advised during surge capacity scenarios, like as the COVID-19 pandemic. Personal protective equipment (PPE) became a household name as a result of the COVID-19 pandemic, as many residents were made aware of its importance in preventing community spread and protecting front-line health care workers (HCWs). PPE is defined as "an item of clothing that is especially designed and manufactured to isolate all or part of the body from a possible hazard or to isolate the external environment from contamination by the wearer of the garment." Market Research: - Market Research Report HCWs use protective clothing to prevent the spread of blood, body fluids, and other potentially infectious materials, as well as to help preserve the environment. During patient care, these clothes are the HCW's only line of defence and protection against potentially fatal infectious diseases and viruses. During the COVID-19 pandemic, a serious scarcity of necessary PPE generated worry among health care personnel, who feared being infected by the patients they cared for and, as a result, passing the virus on to their own families. Medical gowns, which include both isolation and surgical gowns, are an important aspect of health care workers' PPE. Following gloves, medical gowns have been identified as the second most widely utilized PPE item in health care settings. Major Key Players: • Primewear Hygine (India) Product Ltd. • Raaj Medisafe India Ltd. • Surgeine Healthcare (India) Pvt. Ltd. • Vikram Nuvotech India Pvt. Ltd. For More Details: https://www.entrepreneurindia.co/project-and-profile-listing?CatId=39&SubCatId=39&CatName=Surgical,%20Medical%20Plastics,%20Medical%20Disposables,%20Disposable%20Medical%20Products%20used%20in%20Hospitals #DetailedProjectReport #businessconsultant #BusinessPlan #feasibilityReport #NPCS #entrepreneurindia #startupbusiness #ProjectReport #startup #projectconsultancy #businessopportunity #MedicalGowns #MedicalDrapes #MedicalDisposable #MedicalDisposableProducts #MedicalIndustry
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start a E-Waste Recycling Plant Waste Electrical & Electronic Equipment (WEEE)

Electronic wastes, often known as "e-waste," "e-scrap," or "Waste Electrical and Electronic Equipment," or "WEEE," are surplus, obsolete, defective, or abandoned electrical or electronic devices. Electronic garbage, often known as e-waste, refers to obsolete electronic devices such as computers, laptops, televisions, DVD players, mobile phones, and MP3 players. End-of-life information- and telecommunications equipment, as well as consumer devices, are frequently regarded as e-waste in a narrower sense. Electronic garbage, on the other hand, is officially a subset of WEEE (Waste Electrical and Electronic Equipment). The global e-waste management market was valued at $49,880 million in 2020, and is expected to grow at a CAGR of 14.3% from 2021 to 2028, to reach $143,870 million by 2028. The ever-increasing demand for rare metals, combined with their scarcity, has resulted in a rapid rise in their cost. Metals like this must be collected from e-waste and reused in another process. For example, roughly 250 kilogrammes of silver, 24 kg of gold, and nine tonnes of copper can be recovered from one million mobile phones in e-waste. This also helps manufacturers build lower-priced electrical gadgets and obtain a cost advantage over competitors. Few Indian Major Players 1. E-Parisaraa Pvt. Ltd. 2. Ecocentric Management Pvt. Ltd. 3. Greenscape Eco Mgmt. Pvt. Ltd. 4. Navrachna Recycling Pvt. Ltd. 5. Sims Recycling Solutions India Pvt. Ltd.
Plant capacity: Plastic 1.60 MT per day Ferrous Material 1.00 MT per day Aluminium 0.70 MT per day Glass 1.00 MT per day Copper 0.70 MT per dayPlant & machinery: 86 Lakhs
Working capital: -T.C.I: Cost of Project: 314 Lakhs
Return: 27.47%Break even: 60.15%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 17 of 53 | Total 524 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 52 53   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top