The forest in India yields a large number of products, which play an important role in the economy of the country. This book contains processes of forest based products obtained from Indian forests. It gives an insight of richness and vastness of the forest wealth. This book is first of its kind, which covers comprehensive treasure of information on a wide variety of forestry products. It is very useful book for students, growers and marketing agencies, countries where there is rich flora and fauna awaiting proper exploitation, production and utilization.
Also known as Handbook on Specialty Gums, Adhesives , Oils, Rosin & Derivatives, Resins, Oleoresins, Katha, Chemicals with other Natural Products NI 149
The Complete Technology Book On Natural Products (Forest Based)
Author: H. Panda
Published: 2003
Format: paperback
ISBN: 8178330725
Code: NI86
Pages: 834
$ 0
0
Publisher: National Institute of Industrial Research
Usually ships within 3 days
Contents
CHAPTER 1
GUM GHATTI
Chemical Nature
Physical Properties
Manufacture
Biological/Toxicological Properties
Handling
Application Procedures
Commercial Uses
Industries using Gum Ghatti
Formulations Wax Emulsion
Table Syrup Emulsion
Laboratory Techniques
Bark and Foreign Organic Matter (BFOM)
Viscosity (5% Solution)
Viscosity (7% Solution)
CHAPTER 2
GUAR GUM
Manufacture
Seed Structure
Purification
Grades
Chemical and Physical Properties
Structure
Solubility in Water
Rheology
Reactivity
Biological Properties
Handling
Dry Storage
Solution Preparation
Applications
Oil and Gas
Explosives
Textile
Food
Paper
Mining
Commercial Applications: Compounding and Formulating
Food
Explosives
Commercial Uses: Processing Aids
Oil and Gas
Textile
Carpets
Paper
Kraft Papers
Kraft Linerboard
Recycled Linerboard
Corrugating Medium
Boxboard
Offset News Stock
White Papers
Mining
Industries using Guar Gum
Oil and Gas
Explosives
Food
Paper
Textile
Mining
Formulations
Ice Cream
Ice Milk
Sherbet
Sour Cream
Buttermilk
Yogurt
Instant Imitation Bakery Jelly
Whipping Composition for Frozen Deserts
CHAPTER 3
GUM ARABIC
Chemical Nature
Physical Properties
Manufacture
Biological/Toxicological Properties
Rheological Properties
Additives/extenders
Additives
Extenders Handling
Applications
Application Procedures
Compatibility
Commercial Uses
Food Applications
Confectioneries
Dairy Products
Bakery Products
Flavor Fixation
Flavor Emulsification
Beverages
Pharmaceutical
Suspending Agent
Demulcent Agent
Emulsification
Antiseptic Preparation
Miscellaneous Applications Medicines
Cosmetics
Adhesives
Paints
Inks
Lithography
Textiles
Miscellaneous Uses
Industries using Gum Arabic
Food Industry
Pharmaceutical Industry
Cosmetic Industry
Other Industries
Formulations
Confectioneries
Food Emulsions
Pickle Oil Emulsion
Pickle Juice
Beverages
Stabilized Fruit Drink
Dry mix Lmitation Orange Drink
Cloud Gum
Beverage Stabilizers
Nut Coating
Inks
Gloss finish Inks Wood grain Inks
Laboratory Techniques
30% Viscosity Method
Insoluble Residue
Sediment and Color
Peroxidase Content
CHAPTER 4
GUM KARAYA
General Information
Chemical Nature
Physical Properties
Films
Adhesiveness
Hydrolysis
Pastes
Grades
Manufacture
Biological/Toxicological Properties
Short term Studies
Long term Studies
Special Studies
Rheological Properties
Handling
Applications
Application Procedures
Compatibility
Future Develovments Commercial Uses
Commercial Uses
Pharmaceuticals
Pulp and Paper
Food Products
Textiles
Petroleum and Gas Recovery
Industries using Gum Karaya
Formulations : Pharmaceuticals
Denture Adhesive
Colostomy Rings
Cosmetic
Alcohol Wave set Concentrate
Typical Wave set Formula
Food Products : Sherbet Stabilization
CHAPTER 5
GUM TRAGACANTH
Chemical Nature
Structure
Reactivities Acid
Labile Sugars
Electrochemical Properties
Physical Properties : Rheological Properties
Biological/Toxicological Properties
Consumer Exposure Data
Caloric Value
Hypercholesterolemia
Tumors
Allergenic Properties
Lethal Effects
Manufacturing and Quality Control
Handling
Additives and Extenders
Application Procedures
Specialties
Future Developments
Commercial Uses: Compounding and Formulating
Pharmaceutical and Medical
Food Products
Ice Cream Stabilizers
Water Ices
Commercial Uses: Processing Aids
Crayon Manufacture
Ceramics Manufacture
Leather Curing
Textiles Processing
Paper Processing
Wooden Match Manufacture
Industries using Gum Tragacanth
Food Industry
Pharmaceutical and Cosmetic Industries
General Industrial Uses
Formulations
Italian Dressing
Russian Dressing
Blue Cheese Dressing
French Dressing
Low calorie Italian type Dressing
Sweet and Sour Sauce
Low calorie French type Dressing
Barbecue Sauce
Dietetic (artificial) Fruit Jelly
Citrus flavor Beverage Emulsions
Low calorie Chocolate Syrup
Low calorie Chocolate Pudding
Marshmallow Topping
Nondairy Sour Cream
Toasted Onion flavored Chip Dip
Mesican flavored Chip Dip
Tuna, Chiken and Ham Salad Spreads
Cole Slaw Dressing
Imitation Mayonnaise Dressing
Mustard Sauce
Spaghetti Sauce
Pickle Relish
Laboratory Techniques
Identification
Microscope Instrument
Viscosity Testing
CHAPTER 6
LOCUST BEAN GUM
Manufacture
Seed Structure
Purification
Grades
Properties
Structure
Solubility in Water
Rheology
Reactivity : Dericatices
Commercial Uses : Compounding and Formulating
Food Products
Ice Cream
Cheese
Sauces and Salad Dressings
Canned Pet Food
Commercial Uses : Processing Aids
Textiles Processing
Carpets Processing
Dyeing Carpets
Paper Products
Wet end Addition
Gum Preparation
Mining Industry
Industries using Locust Bean Gum : Food Industry
Mining Industry
Paper Industry
Textiles Industry
Formulation Ice Cream
Ice Milk
Sherbet
Sour Cream
Buttermilk
Yogurt
Instant Lmitation Bakery Jelly
Whipping Cream Composition (for Frozen Desserts)
CHAPTER 7
TAMARIND GUM
Chemical Nature
Molecular Weight
Derivatives
Miscellaneous
Physical Properties
Manufacture
Bilogical/Toxicological Properties
Electrochemical Properties
Rheological Properties
Handling
Applications
By Result
By End Product
By Industry
Application Procedures
Future Developments
Commercial Uses
Processing Aids
Industries using Tamarind Gum
Formulations
Size for Jute Yarn
Size for Cotton Warps
Latex Manufacture
Other Uses
Laboratory Procedures
Viscosity Method
Acid Insoluble Residue (Air)
Fat Content 33
Term Glossary
General Information
Chemical Structure
Physical Properties
Solution Properties
Effect of Salts on Viscosity
Effect of PH on Viscosity
Gelation With Metals
Regulatory Status
Commercial Uses : Food
Xanthan Gum
Dressings
Foods and Drinks
Other Products
Xanthan Gum With Locust Bean Gum
Commcercial Uses : Industrial
Xanthan Gum
Viscosity Control
Other Applications
Xanthan Gum With Locust Bean Gum
Agricultural Sprays
Gelled Products
Slurried Explosives
Fire Fighting
Paper Sizing
Photographic Processing
Formulations
Dessert Soulfles
Vanilla Souffle
Chocolate Souffle
Lemon Souffle
Bakery Jellies
Salad Dressings
Green Goddess
Creamy Russion
French Dressing
Creamy Italian
Italian Dressing
Dry Sauce Mixes
Cheese Sauce Mix
Barbecue Sauce Mix
Spaghetti Sauce Mix
White Sauce Mix1
Frozen Pizzas
Animal Feeds (Liquid)
Laboratory Techniques
Viscosity (Food Grade)
Viscosity (Industrial Grade)
Moisture Content
Powder Color
Determination of Gum in Mixtures
CHAPTER 8
CASSIA SIAMEA LAM. SEED
A NEW SOURCE OF COMMERCIAL GUM
Material and Methods
Results and Discussion
CHAPTER 9
ROSIN AND ROSIN DERIVATIVES
Composition
Reaction and Derivatives
Isomerization
Maleation
Oxidation
Photosensitized Oxidation
Hydrogenation
Hydrogenless Hydrogenation
Polymers of Vinyl Esters of Hydrogenated Rosin
Perhydrogenation
Hydrocracking of Rosin
Dehydrogenation
Polymerization
Analysis
Instrumental Analysis
Phenolic Modification
Salt Formation
Esterification
Hydrogenolysis
Polyesterification
Copolyesters
Ammonolysis
Preparations
Typical Uses
Styrenation
Decarboxylation
Hydroxymethylation and Hydroxylation
Nitrogenous Intermediates
Oxonation
Esterification of Methylolated Rosin
Amidation (12 AEAA)
Halogenated Rosin
Non phthalic Alkyd Resins
Shellacemodified Rosin
Use of Rosin in the Polymer Field
Adhesives
Hot Melt Adhesives
Chewing Gum
Floor Polishes
Flooring Materials (Vinyl Flooring)
Linoleum
Paper Sizing
Printing Inks
Letter Press Inks
Flexographic Inks
Gravure Inks
Lithographic Inks
Protective Coatings
Air Drying Hammer Finish
Epoxy Esters
Lacquers
Varnishes
Rubber
Pharmaceutical Uses
CHAPTER 10
TURPENTINE AND ITS DERIVATIES
Introduction
(i) Processing of Oleoresin
I. Olustee Gum Cleaning Process
II. Recovery of Turpentine and Rosin
Batch Processing
Continuous Processing
Heater
Stripping Column
1. Multiple Tube Column
2. Luwa Columns
(ii) Fractionation of Turpentine
Batch Operation
Semi continuous Operation
Continuous Operation
Column Packings
Catalytic Isomeiztion of alpha pinene
pinene
carene
Longi Folene
Methods of Preparation of Terpene Derivatives
Camphene
Thanite : Properties
Applications
P Menthadienes and P cymene
Myrcene
Alloocimene
Geraniol and Nerol
Linalool
Citral
Ionones and Methylonones
Citronellol
Citronellal
Myrcenol
Menthol
Carvone
Camphor
Pine Oil
Terpin Hydrate
Terpineols
Isobornyl Acetate Adn Isoborneol
Cinedles
Terpen Resing (TPR)
Thymol
Xtone 505
Terpinyl Acetate
Isolongi Folene
Actyl Longifolene
Camphor Oil
Fenchone
Aclinol
Acinone
Pinetar
Future Utilizations
Uses of Terpene Derivatives
Perfumes and Flavours
Jasmin
Orange Flower and Neroli
Vidlet
Fougere (Fern)
Lily of the Valley
Linden (Lime Blossom)
Green Perfumes
Perfumes for Men
Soap
Masking
Agarbatti
Textile Perfumes
Aerosol Products
Supari Chewing Tobacco
Cigarettes
Boot Polish
Perfumed Disinfectants
Medicines
Pressure Sensitive Adhesives (PAS)
Hot Melt Adhesives (HMA) and Coatings
Other Uses
Latest Uses of Terpene Solvent
CHAPTER 11
TALL OIL AND ITS DERIVATIVES
Production Processes for Tall Oil
Recovery of Tall Oi
Acid Refining of Tall Oil
Fractionation of Tall Oil
Composition and Properties of Tall Oil
Crude Tall Oil
Distilled Tall Oil
Acid Refined Tall Oil
Fractionated Tall Oil
Analysis and Testing of Tall Oil Products
Shipping, Storage, and Handling of Tall Oil Products
Crude Tall Oil
Acid Refined Tall Oil
Tall Oil Fatty Acids and Distilled Tall Oils
Tall Oil Heads
Tall Oil Pitch
Tall Oil Rosin
Applications of Tall Oil
CHAPTER 12
THE CHEMISTRY OF TALL OIL FATTY AND ROSIN ACIDS
Chemical Composition of Tall Oil Fatty Acids
General Reactions of Tall Oil Fatty Acids
Reactions Involving the Double Bonds
Reactions Involving the Carboxyl Group
Chemical Composition of Tall Rosin
General Reactions of Tall Oil Rosin
Reactions Involving the Carboxyl Group
Reactions Involving the Double Bonds
CHAPTER 13
TALL OIL PRODUCTS IN SURFACE COATINGS
Tall Oil in Alkyd Resins
Tall Oil Formulation in Alkyd Resins
Short Oil Banking Alkyd solvent Process
Short Oil Banking Alkyd fusion Process
Long Oil Alkyd fusion Process
Rosin Modified Alkyd fusion Process
Epoxy Modified Alkyd
Esters of Tall Oil Products Tall Oil Fatty Acids
Tall Oil Rosin
Tall Oil Formulations in Esters
Glycerine Ester
Maleic Modified Ester
Distilled Tall Oil Epoxy Ester
Tall Oil Pitch
Other Uses for Oil Products
Limed Tall Oil Rosin
Limed Acid Refined or Distilled Tall Oils
Styrene Resins
Latex Paints
Polyurethanes
Putty and Caulking Compounds
Varnishes
Tallate Driers
Tempering Oils for Hardboard
CHAPTER 14
TALL OIL IN THE PLASTICIZER FIELD
Tall Oil Plasticizers
Esterification of Tall Oil for Plasticizers
CHAPTER 15
TALL OIL IN ADHESIVES AND LINOLEUM CEMENT
Tall Oil Rubber Adhesives
Tall Oil in Hot Melt Adhesives
Tall Oil Products in Linoleum Cements
Formulation With Tall Oil
Formulation With Tall Oil Esters
CHAPTER 16
TALL OIL IN ASPHALT PRODUCTS AND PETROLEUM USES
Tall Oil in Asphalt
Roads
Soil Treatments
Roofing
Adhesives
Antistripping Agents
Plasticizers
Miscellaneous
Tall Oil in Petroleum Applications
Oil and Gas Well Fracturing
Drilling Muds
Demulsification Agents
Corrosion Inhibitors
Catalyst
Lubricating Oil Additives
CHAPTER 17
TALL OIL IN LIQUID SOAPS
Tall Oil in Disinfectants
Tall Oil in Synthetic Detergents and Wetting Agents
Syndet Types
Syndet Products
Tall Oil in Biodegradable Detergents
CHAPTER 18
TALL OIL IN FLOTAION COLLECTORS AND CORE OILS
Tall Oil in Flotation Collectors
Flotaion Collectors
Flotation Applications
Tall Oil in Core Oils
CHAPTER 19
TALL OIL IN RUBBER
Styrene butadiene Rubber
Cold SBR Formulation (SBR 1500 Series)
Hot SBR Formulation (SBR 1000 Series)
Cold High Solids SBR 2105 Latex Formulation (SBR 2100 Series)
Hot SBR Latex Fromulation (SBR 2000 Series Type II)
Foam Rubber
CHAPTER 20
TALL OIL IN PAPER SIZE
Paper Making Process
Rosin Sizing Materials
Forms of Size Available
Paste Size
Dry Size
Methods of Preparing Liquid Size
Cooking Process
Emulsion Process
Bewoid Process
Delthirna Process
Internal and External Sizing
Effect of Wet Strength Resins and
Paper Coating Resins on Sizing
Sizing of Nonconventional Paper
Testing of Sizing
Water Resistance of Paper and Paperboard T433 M 44
(Dry Indicator Method)
Water Immersion Test of Paperboard
Water Absorption of Paperboard
Water Absorptiveness of Nonbibulous Paper and Papeboard
T441 M 60 (Cobb Test)
Degree of Curl and Sizing of Paper T466 M 52
Ink Penetration Test
Fotosize Penetration Test Lactic Acid Test
CHAPTER 21
TALL OIL IN PRINTING INKS
Typographic Printing and Typographic Inks
Heat Set Inks
Steam Set Inks
Newsprint Inks
Lithographic Printing and Lithographic Inks
Intagio or Gravure Printing and Gravure Inks
Silk Screen Printing Inks
Overprint Varnishes
Bag Inks
CHAPTER 22
MISCELLANEOUS APPLICATIONS OF TALL OIL
Tall Oil Fatty Acids for Chemical Intermediates
Polymerized Fatty Acids
Azelaic and Pelargonic Acids
Tall Oil in Corecipitated Barium Salts
Tall Oil in Defoamers
Tall Oil Pigment Dispersants
Tall Oil in Masonry and Cement Coatings
CHAPTER 23
EUCALYPTUS : A VERSATILE MATERIAL FOR
AROMA CHEMICALS
CHAPTER 24
HIMALAYAN CEDARWOOD OIL
Indian Himalayan Cedarwood Oil
Comparative Studies
Export of Himalayan Cedarwood Oil from India
Solvent Extraction of the Oil
Purification of the Oil
Empyreumatic Himalayan Cedarwood Oil Vern. Chiloon Oil
CHAPTER 25
ESSENTIAL OIL OF DEODAR (CEDRUS DEODARA)
The Essential Oil
Raw Material
Physico chemical Properties
Chemical Composition of C. Deodara
Distillation
Latest Research Work
Uses of Cedarwood Oils
CHAPTER 26
ESSENTIAL OIL OF JUNIPERUS RECURVA VAR.
SQUAMATA AND OTHER OILS OF JUNIPERUS SPP.
Oil From Berries
Oil From Leaves
Oil From Wood
Experimental
Tlc of the Oil
Glc of the Oil
CHAPTER 27
AGARWOOD AND OIL OF ARARWOOD
Physico chemicals Properties and Chemical Composition
Trade and Production of Agar and Its Oil
Uses
CHAPTER 28
ESSENTIAL OILS OF CINNAMUM SPECIES
Cinnamum Cassia (nees) Nees Ex Blume
Export Import of Cassia and Tejpat Leaves
CHAPTER 29
LIGNIN AND ITS DERIVATIVES
Primary Source
Manufacture of Lignin and Its Derivetives:
General Properties
Commercial Lignins
Uses
CHAPTER 30
UTILIZATION OF TANNIN FROM WASTE CONICER BARKS
Chir Pine and Its Availability
Techinical Analysis
(a) Evaluation Studies
(b) Leaching Studies
(c) Tanning Procedure : (1)
Conclusion and Suggestions
CHAPTER 31
LEACHING AND TANNING STUDIES ON
COMMERCIAL GRADE NASPAL (POMEGRANATE RIND)
Experimental
Conclusions
CHAPTER 32
CHEMICAL EXAMINATION OF THE TANNIN
PEARING PLANTS OF THE FORESTS OF ANDHRA PRADESH
CHAPTER 33
SAL SEEDS A NEW SOURCE OF TANNING MATERIAL
Isolation and Identification of Polyphenolic Construents
Separation and Utilisation of Sal Tannings
CHAPTER 34
PREPARATION OF PHENOLIC RESINS FROM
MYROBALAN TANNIN EXTRACS
Polyphenolic Compounds of Myrobalan
Reaction of Formaldehyde With Myrobalan Extract in Presence of
Both Acid and Alkali Catalyst
Condensation With Formaldehyde
Condensation Reaction of Gallic Acid with Formaldehyde
Reimer Tieman Reactions
Duff Reaction
Villsmeyer Reaction
CHAPTER 35
KATHA PRODUCTION IN TARAI AREA OF UTTAR PRADESH
Chipping
Extraction
Concentration
Crystallization
Filtration
Hydraulic Press
Hydraulic Press
Drying of Katha Batties
Manufacture of Deshi Katha
Utilization of Byproducts
CHAPTER 36
STUDIES ON THE EFECTS OF WOOD MOISTURE ON
THE RECOVERY OF KATHA FROM ACACIA CATECHU
Experimental
Result & Discussion
Inferences
CHAPTER 37
EXTRACTION OF PURE CATECHIN FROM KHAIR WOOD
AND KATHA SAMPLES AND AN IMPROVED METHOD FOR
ITS ESTIMATION
Experimental
Extraction of Catechin From Wood by using Organic Solvents
CHAPTER 38
ADHESIVES FOR WOOD BASED ON
NATURAL POLYPHENOLIC SUBSTANCE
Adhesives Based on Tannins
Tannins are Classified in two Groups
Adhesives Based on Lignins
CHAPTER 39
LAC PRODUCTION, UTILISATION AND FUTURE
Production
Utilisation
CHAPTER 40
HIGH ALPHA CELLULOSE PULP EXPERIMENTAD
RESUMS & DISCUSSION FROM POPLAR CASALE
Analysis
CHAPTER 41
HIGH ALPHA CELLULOSE FROM FAST GROWING
PLANTS SUCH AS CROTALARIA JUNCEA AND
CROTALARIA RETUSA
Experimental
Results & Discussions
CHAPTER 42
UTILIZATION OF PINUS CARIBAEA NEEDLES FOR
FIBRE BOARDS
Material & Method
Board Formation
Additives Blending
Pressing
Results and Discussions
CHAPTER 43
WOOD POLYMER COMPOSITES AND
THEIR INDUSTRIAL APPLICATIONS
Chemistry of the Process
Impregation Process
Monomers for Wood Polymer Composites
Physical Properties
Commercial Applications
Catalys Heat Process
World Wide Production
CHAPTER 44
POLYURETHANE FOAMS FROM THE REACTION OF
BARK AND DIISOCYANATE
CHAPTER 45
PARTICLEBOARD MANUFACTURE AND PROCESSING
Definition
Raw Materials
Wood
Adhesive
Wax Emulsions
Manufacturing : Particle Preparation
Particle Drying
Blending
Mat Formation
Pressing Operation
Finishing
Surface Finishing
Grain Printing on Flat Panels
Conclusion
CHAPTER 46
CARBOHYDRATE MODIFIED PHENOL FORMALDEHYDE
RESINS FORMULATED AT NEUTRAL CONDITIONS
Experimental Methodology : Adhesive Formulation
Veneer
Bonding
Determination of Shear Strength
Prehydrolyis of Southern Red Oak
Extraction of Cured, Modified Phenol formaldehyde Resins
Isolation of Compounds VI VIII
Results and Discussion : Bonding Veener Panels
Incorporation of Carbohydrate Into Cured Raesin
CHAPTER 47
UTILIZATION OF MINOR OIL SEEDS
Appendix
Mahuva : (Madhuca Latifolia or M. Lonoifolia)
Sal : (Shorea Rubsta)
Kusum : (Schleichera Trijuga)
Khakhan : (Salvadora Olecedes)
Tamarind : (Tamarindus Indiac)
Undi : (Calohyllum Inophyllum)
Karanda Oil : (Pongamia Glabra)
Pisa : (Aetinodaphone Bookeri)
Neem : (Azadirachta Indica)
Kokum :(Garcinia Indica)
Dhupa : (Veteria Indica)
CHAPTER 48
CHEMICAL INVESTIGATION OF FATTY OIL OF
BURSERA PENICILLATION SEED
Composition of the Seed Kernel Oil
CHAPTER 49
ABUTILON INDICUM SEED OIL: CHARACTERISATION OF
HBR REACTIVE ACIDS
CHAPTER 50
A NEW B HYDROXY OLEFINIC FATTY ACID
IN PLANTAGO MAJOR (PLANTAGINACEAA) SEED OIL
CHAPTER 51
GYANOLIPIDS OF BORAGINAGEA SEED OILS
CHAPTER 52
STYRNE COPOLYMERINZATION OF BABUL (ACACIA)
OIL AND ISTS ALKY
Experimental Materials Used
Refining and Bleaching of the Oil
Isomerization
Styrenation of Babul Oil
Preparation of Styrenated Alkyds
Pre styrenation Process
Formulation
Post Styrenation Process
Formulation
Testing
Results and Discussion
Conclusion
CHAPTER 53
INVESTIGATION OF NEEM SEED SHELL FLOUR
Experimental : Preparation of Sample
Treatment of the Shell Flour
Preparation of Moulding Powder
CHAPTER 54
DEVELOPMENT OF SALSEED OIL INDUSTRY
CHAPTER 55
STUDIES ON TAMARIND KERNEL OIL
Experimental : Materials
General Methods
Extraction, Purification and General Characterization of
Tamarind Kernel Oil
Analysis of Fatty Acid Composition
Extraction and Identification of Monoglycerides
Extraction and Identification of Free Fatty Acids
Isolation and Characterization of Unsaponifiable Matter
Fractionation of Tamarind Kernel Oil
Analysis of Neutral Lipids
Deacylation of Phospholipid Fractions
Hydrolysis of Phospholipids, Identification of Bases
Identification of Polyhydroxy Compounds
Analysis of Glycolipid Fraction
Indentification of Component Sugare
Tlc Analysis of Glycolipid Fraction
Analysis of Sterol Glycoside
Componental Analyysis of Asg
Results and Discussion : Total Fatty Acids
Neutral Lipids
Unsaponifiable Matter
Samples Phospholipids
Gyclolipids
CHAPTER 56
TECHNOECONOMIC EVALUATION OF ANGELICA
ARCHANGELICA ROOTS AS A COMMERCIAL SOURCE
OF ANGELICA OIL
Materials and Methods
Technoeconomic Evaluation
CHAPTER 57
COMMERCIAL UTILISATION OF INDIAN BERBERSIS
Raw Material
Chemical Evaluation
Resources
CHAPTER 58
PROCESS DEVELOPMENT FOR HECOGENIN AND
SOLASODINE
Hecogenin From Agave Species
Solasodine From : Solanum Khasianum
CHAPTER 59
PRODUCTION OF STRYCHINE AND BRUCINE FROM
NUX VOMICA PROCESS:
Process
Yields
Equipments Required
Raw Materials
Economics
CHAPTER 60
AN IMPROVED METHOD FOR THE PRODUCTION OF
SRUCINE AND STRYCHNINE FROM STRYCHNOS
NUX VOMICA BARK
Uses
Earlier Methods of Extraction of Strychnine and Brucin
Improved Method for the Extraction of Brucine and Strychnine
CHAPTER 61
HERACLEUM SPECIES AS SOURCES FOR
FURANOCOUMARINS
CHAPTER 62
MEDICINAL AND AROMATIC PLANT RESURCES OF
THE KUMAON HIMALAYAS: PRESENT PUSITION, FUTURE
STRATEGIES AND PROSPECTS
Appendix 1 : Medicinal Plants Bearing Alkaloids
Appendix II: Plants Bearing Glycosides
Appendix III : Plants Bearing Edible and
Appendix IV : Plants Bearing Tannins
Appendix V : Plants Bearing Essential Oils
CHAPTER 63
UTILIZATION OF APRICOT KERNELS AND
A SOURCE OF VITAMIN B15
CHAPTER 64
SOLVENT EXTRACTION OF ARTEMISIA ANNUAL ON
PILOT PLANT SCALE
Experimental Procedure
A. Bench Scale Study
B. Pilot Plant Scale Study
Results and Discussion
CHAPTER 65
CANDELILLA WAX
Results and Discussion
Transplanting and Harvesting
Yield of Stems and Wax
Physico Chemical Properties
Results & Discussion
CHAPTER 66
CHEMURGY OF KALPVRIKSHA
Collection
Transportation
Drying
Decortication
Crushing/Extraction
Solvent Extraction
Saponin
Wet Rendering Process
Production of Palmitic Acid
High Pressure Splitting
Meal
Seed Coat
CHAPTER 67
UTILIZATION OF MOHUA FLOWERS FOR
CITRIC ACID PRODUCTION
Materials and Methods
Microorganism
Growth of the Organism
Viscosity
Determination of Sugar
Determination of Citric Acid: Fermentation Conditions
Results and Discussion
Effect of Cultural Conditions of Citrate Production
CHAPTER 68
INDUSTRIAL UTILIZATION OF KOKAM
CHAPTER 69
NUTRITIVE VALUE OF SOME LESSER KNOWN
WILD FRUITS OF JAMMU & KASHMIR STATE
Availability and Utilization
Experimental
Results and Discussion
CHAPTER 70
WILD VEGETABLE OOD MATERIALS OF JAMMU AND KASHMIR
Bauhinia Variegata Linn
Bombax Ceiba Linn
Capparts Spinosa Linn
Caralluma Tuberculata N.E. Br.
Cicer Soongaricum Stapf
Coccinia Cordifolia
Codonopsis Ovata Benth
Corylus Colurna Linn.
Diplaium Esculentum
Emblica Officinalis Gaertn.
Eremurus Spp.
Euphorbia Royleana Linn.
Megacarpaea Polyandra Benth.
Momordica Dioica Roxb.
Morniga Oleifera Lamk
Punica Ranatum Linn
Rheum Spp. R.emodi Wall
Taraxacum Officinale Weber
Telosma Pallia Craib. (D.Goalmanda)
CHAPTER 71
EDIBLE MUSHROOMS OF JAMMU & KASHMIR FORESTS
Morels (Morchella Sp.)
Dhingri (Pleurotus)
Pleurotus Fossulatus (Cooke) Sacc
Pleurotus Flabellatus (Berk, and Br.) Sacc; Vern
Other Edible Mushrooms
Coprinus
Geopora Arenicola
Boletus Sp.
Agrocybe Cylindracea (D.C. ex. Fr) R.maire
Flammulina Velutipes Curt. Ex. Fr. (Karst): Lactarius
Scrobiculatus Scop. Ex. Fr.
Tuber Cibarium Sibth.
CHAPTER 72
PROSPECTS OF FURFURAL AND FURFURAL
BASED INDUSTRIES IN INDIA
Uses
Conventional Processes
Possibilities
Conclusion
CHAPTER 73
KEWDA INDUSTRY IN ORISSA
Distribution Pattern and Availability of the Plant
Historical Development and Present Set Up of the Industry
Uses and Demand of the Perfume
Collection
Distillation
Cost Estimation
Present Position and Future Prospects of the Industry
CHAPTER 74
PENCIL RAW MATERIALS IN KERALA
Industry A Birds Eye View
Specification of Wood
Species Used and Availability
Some Suggestions conclusion
Conclusion
CHAPTER 75
FOREST BASD RAW MATERIALS IN NEPAL
Tropical Zone (below 1000 M)
Sub Tropical Zone (1000 2000 M)
Temperate Zone (2000 3000 M)
Sub Alpine Zone (3000 4000 M)
Climate and Temperature
Raw Materials
Plants Yielding Vegetable Gums and Resins
Bengal Kino Gum or Palash Gum
Sal Gum
Sahanjan Gum
CHAPTER 76
MINOR FOREST PRODUCTS OF BIHAR
CHAPTER 77
INDUSTRIALLY IMPORTANT MINOR FOREST
PRODUCTS OF ORISSA
Plants Used in Drug and Pharmaceutical Industry
Plants Used in Perfumery Industry
Vetiveria Zizanioides (Vetiver)
Cymbopogen Flexuosus (Lemongrass)
Hyptis Suavelens (Linn.) Poit
Plants Yielding Gums and Resins of Industrial Use
Plants Used in Vegetable Oil and Fat Industry
Madhuca Latifolia (Roxb)
Pongamia Pinnate (Linn.)
Sehleichera Elesa (Lour)
Plants Used in Food or Food colourant Industries
Bixa Orellana Linn
Plants Used in Leather Tanning Industry
Cleistanthus Collinus (Karade)
Broomgrass for Broom Industry
Kendu for Bidi Manufacturing Industry
Bamboo for Pulp in the Paper Industry
Fibre Yieldig Plants for Cordage Industry
List of Address of Machinery Suppliers
Sample Chapters
GUAR GUM
Guar gum is found in the seeds of two annual leguminous plants (Cyamopsis tetragonalobus and psoraloides). The seeds are contained in pods 2.54 to 5.08 cm (1 to 2 in) long. In India and Pakistan, where the crop has been grown for centuries as a food for both humans and animals, hand labor is used in the harvest. In the southwestern United States, however, it has established itself with the past 30 years as a cash crop suitable for modern mechanical farm technology. The need for reliable supplies of guar gum continues to grow rapidly, and efforts are underway to establish it as a cash crop in other parts of the world.
Manufacture
The production of gaur gum in the broadest sense is a series of crushing, sifting, and grinding steps to separate the seeds from the pod and then to separate the valuable gum from the seeds. Processing techniques influence the properties and economics of guar gum ad its derivatives, and are generally held as valuable proprietary information by the various producers.
Seed Structure
The gum in contained within a portion of the seed known as the endosperm. This is the reserve food supply for the developing embryo during germination. Since the seed is dicotyledenous, two endosperm halves are obtained from each seed. These endosperm halves surround the embryo, and they are in turn surrounded by a hull, which is usually light tan in color. In some of the plant varieties, the hull is normally darker. In all varieties, there is a tendency for the hull to darken if the crop is not harvested promptly following the first frost and the next rain. In severe cases of weather damage, many of the seeds wither and turn black. The yield of gum is lowered, and the gum can be contaminated with black specks.
Guar seeds range from 0.254 to 0.635 cm (0.1 to 0.25 in) in diameter, and the endosperm is from 35 to 42% of the weight of the seed.
Purification
Endosperm is separated from the hull and embryo by taking advantage of the difference in hardness of the various seed components. Multistage grinding and sifting operations are combined with other physical treatments to crack the seeds and separate the parts. There are many types of grinders, such as attrition mills and special types of hammer and roller mills, that can be employed in combination with water or acid soaks and embrittling heat treatments.
Grades
The endosperm is ground, to powder form and marketed as guar gum.
Food-grade. Substantially but not completely pure endosperm is obtained by the usual commercial purification techniques. There may be a small amount of hull and germ present, owing to imperfect purification. Since the entire seed is edible, this contamination dilutes slightly the amount of available gum, but does not harm its suitability as a food additive. See Tables 1 and 2 for Food Chemicals Codex specifications any typical analysis.
Determination of moisture, protein, and acid-insoluble residue content is generally considered to be the minimum analysis needed to monitor the efficiency of the purification process. The presence of the germ is reflected in high protein content. Hull fragments show up as a high acid-insoluble residue. Moisture contents above 15% or below 8%.
TABLE - 1
Food Chemicals Codex Specifications for Guar Gum
Galactomannans: Not less than 66.0%
Limits of impurities:
Acid-insoluble matter: Not more than 7%
Arsenic (as is): Not more than 3 ppm (0.0003%)
Ash (total): Not more than 1.5%
Heavy metals (as Pb): Not more than 20 ppm (0.0002%)
Lead: Not more than 10 ppm (0.001%)
Loss on drying: Not more than 15%
Protein: Not more than 10%
Starch: Passes test (negative)
TABLE - 2
Typical Analyses of Guar Powder
Food-grade fine mesh | Food-grade Intermediate mesh | Food-grade coarse mesh | Industrial-grade fine mesh | |
---|---|---|---|---|
Percent moisture | 10-12 | 10-12 | 10-12 | 10-12 |
Percent protein | 4-6 | 4-6 | 4-6 | 4-6 |
Percent acid insoluble residue | 2.5-5.5 | 2.5-5.5 | 2.5-5.5 | 2.5-5.5 |
Viscosity :* Pa's | 3-5 | 2.5-4.5 | 2-3.5 | 3-5 |
cP | 3000-5000 | 2500-4500 | 2000-3500 | 3000-5000 |
*At 25oC as measured on a Brookfield Synchro-Lectric viscometer at 20 rpm.
exceed normal equilibrium moisture and indicate abnormal treatment of the seed or powder.
A crude fiber determination is sometimes used in place of the acid-insoluble residue. Crude fiber is the acid and alkali-insoluble residue and typically amounts to about half of the acid-insoluble residue. It is recognized that other natural impurities are present in food-grade guar gum. The natural mineral content of the seeds gives rise to an ash content. Low molecular-weight soluble sugars are present but not usually assayed, and a small ether extractable fraction reflects the natural presence of fats and oils.
Industrial-grade. Historically, most of the guar gum sold for industrial applications has been made from endosperm as pure as that used for food-grade products. Industrial grades however, make extensive use of chemical additives to modify and control such properties as rate of swell, viscosity, and solution stability for specific end uses. These additives can lead to controlled gelation and controlled viscosity decrease.
Processing techniques can also control dispersion, rate of hydration, and viscosity. When these techniques are combined with the use of chemical additives, they lead to the historic pattern of tailor-made products which has dominated the growth of guar consumption.
Derivatives. In recent years, anionic (carboxymethyl), non-ionic (hydroxyalkyl), and cationic (quaternary amine) derivatives have become important factors in total guar consumption. These derivatives are not presently approved for food use, although some may be in the future. The development of the derivatives has followed the pattern previously noted for industrial-grade products. That is, they make full use of chemical additives and processing techniques and are designed to satisfy specific customer enduse requirements. Many produts are currently available, and their number and importance are growing rapidly.
Chemical and Physical Properties
Guar gum is a carbohydrate polymer containing galactose and mannose as the structural building blocks. The ratio of the two components may vary slightly, depending on the origin of the seed, but the gum is generally considered to contain one galactose unit for every two mannose units.
Structure
It has long been accepted that the structure of guar gum is a linear chain of b-D-mannopyranosyl units linked (1Ý 4) with single-membered a-D-galactopyranosyl units occurring as side branches. The a-D-galactopyranosyl units are linked (1 Ý 6) with the main chain. Recent work has confirmed the long-held belief that the side branches are spaced uniformly. Guar gum is a natural alternating copolymer, as shown in Fig. 1.
All of the commercially important derivatives of guar are formed by etherification. The primary C6 hydroxyl position is the most highly reactive, but the secondary hydroxyls are also sites or substitution.
Solubility in Water
Guar gum is a cold water-swelling polymer. In its powdered commercial form the rate of thickening and the final-viscosity reflect the process history of the product, including the particle size of the powder. See Fig. 2 for typical swell curves of a range of available products.
Heating a guar gum solution reduces the time needed to reach its full viscosity potential.
Water is the only common solvent for guar gum, although it will tolerate limited concentrations of water-miscible solvents, such as alcohols. Dimethylformamide and dimethylsulfoxide are solvents as they are for most other polymers.
Commercial guar gum solutions are typically turbid. The turbidity is largely caused by the presence of insoluble portions of the endosperm. Polymer solutions, intensively purified in the laboratory by noncommercial methods, approach water clarity.
Derivatives of guar gum can show dramatically different solubilities and clarities in solution. There are hydroxyalkyl derivatives available, much clearer than guar gum, capable of tolerating major proportions of water-miscible solvents. Carboxymethyl derivatives in general are much clearer than guar gum. Improved clarity results from derivatization and solubilization of insoluble seed impurities. Changes in solubility occur when sufficient hydroxyl groups of the galactomannan are substituted and the new polymer takes on some of the characteristics of the derivatizing reagent.
Rheology
Guar gum is one of the most highly efficient water-thickening agents known. Solutions of guar gum and its derivatives are non-Newtonian, classed as pseudoplastic. They thin reversibly when heat is applied and degrade irreversibly with time when an elevated temperature is maintained. Some of the recently developed hydroxy-alkyl derivatives resist such degradation to a much greater degree. Solutions resist shear degradation well compared to other water-soluble polymers, but they will degrade with time under high shear. Figures 1.2 show viscosity and shear properties of guar gum.
Fig. 2: Viscosity development as a function of time for typical guar products. Solution concentration is 1% in water (Measured on Brookfield Synchro-Lectric viscometer at 20 rpm, 25oC)
Fig. 3: Percent viscosity developed as a function of time for typical fast hydrating guar and guar derivative types. Solution concentration is 1% in water. (Measured on a Brookfield Synchro-Lectric viscometer at 20 rpm, 250C.)
Viscosity. Guar gum and its derivatives are most commonly used at concentrations below 1%. High-viscosity products are thick solutions at this concentration and look more like gels at 3%. Guar and guar derivatives are available in lower-viscosity form for special applications, for example, where high gum solids are favored, where it is desirable to have charged molecules with controlled thickening power, or where less pseudoplastic, more Newtonian solutions are appropriate. The wide range of viscosities commercially available is consistent with the historic approach of designing guar products to meet the needs of an industry. See Table-2 for the range of typical products.
Shear Response. Solutions of guar gum have zero yield value at the most commonly used concentrations. That is, they begin to flow as soon as the slightest shear is applied.
Fig. 4 : Effect of concentration on the viscosity of typical high-and low-viscosity guar products.(Measured on a Brookfield Synchro-Lectric viscometer at 20 rpm after 24 h hydration at 250C.)
Reactivity
The cyclic neutral sugar structures which make up the polymer contain numerous hydroxyl groups (an average of three per sugar unit). The various reactions of guar gum with other substances are explained by the number and position of these hydroxyl groups.
Derivatives. Etherification and esterification reactions are readily carried out through the hydroxyl functionalities. The commercially important derivatives to date have been confined, however, to the etherification reactions: carboxymethylation with monochloroacetic acid, hydroxyethylation with ethylene oxide, hydroxypropylation with propylene oxide, and quaternization with various quaternary amine compounds containing reactive chloride or epoxide sites.
Significant changes in properties occur when the guar molecule is substituted with these reagents. The degree of change is a function of the type of reagent, the amount of reagent, and the conditions of reaction.
Inclusion of charged sites into the guar molecule is a most obvious source of change. Anionic sites (carboxymethylation) and cationic sites (quaternization) modify the way in which the guar molecule reacts with inorganic salts, hydrated mineral and cellulosic surfaces, and organic dyes. Many products have been designed to take advantage of these changes for specific applications. Depending on the need, the rate and degree of adsorption can be strengthened or lessened, flocculation increased or decreased, gelation made easier, and compatibility improved. Carboxymethylation has the added effect of improving the clarity of guar solutions by solubilizing some of the non-guar seed impurities that result from commercial processing.
Changes in solubility in and compatibility with water-miscible solvents are particularly promoted by hydroxyalkylation. For example, dramatic increases in alcohol tolerance are seen with increasing derivatization.
Hydroxyalkylation is a very useful tool for changing the way in which guar reacts with hydrated mineral and cellulosic surfaces. Increasing degrees of derivatization have the effect of lessening the affinity for such surfaces. This leads to compatibility with high-solids mineral dispersions, modified flocculation rates in complex ore dispersions, and easier removal of gum from dyed fabric by way of illustration.
Electrolyte compatibility is extended by hydroxyalkylation (see Table 6.3), Derivatives have been designed to thicken di- and trivalent salt solutions in which guar will fail to hydrate.
TABLE - 3
Electrolyte compatibility of Guar vs. Hydroxypropyl Guar
Viscosity measured on a Brookfield synchro-Lectric viscometer at 20 rpm. Solutions at 1% concentration based on weight of salt solution, 25OC
Viscosity, Pa's (cP) | ||||
---|---|---|---|---|
Guar | Hydroxypropyl guar | |||
26% NaCl | 9.1 | (9.100) | 9.45 | (9,450) |
38%CaCl2 | 0.02 | (20) | 7.7 | (7,700) |
56% Ca (NO3)2 | 0.035 | (35) | 22.55 | (22.500) |
Biodegradability is progressively changed with increasing hydroxyalkylation. Guar which is easily degraded can be made highly resistant and stable in viscosity with suitable substitution.
The solubility and clarity of guar solutions are markedly improved by hydroxyalkylation. As with carboxymethylation, it is believed that this is a result of derivatizing and solubilizing seed impurities, particularly the cellular components of the endosperm.
Mixed ethers of the various reagents are used to combine the benefits of charged and uncharged substitution for specific applications.
The central conclusion to be drawn from the preceding discussion is that guar gum has proved to be an excellent polymeric raw material for the creation of new and important water-soluble gums. In the process, the range of problems that can be solved has been greatly expanded. The outlook is for a continuing flow of new products in the years ahead. These products will provide increasingly more sophisticated answers to major industrial needs.
Borax Reaction. Each of the sugar residues in the polymer has two hydroxyl groups positioned in the cis- form. This leads to an interesting and valuable reaction with dissociated borate ions that is characteristic of such polymers. The reaction is fully reversible with changes in pH. An aqueous solution of the gum will gel in the presence of borate when the solution is made alkaline, and will liquify again when the pH is dropped below 7. If the dry powdered gum is added to alkaline borate solution, it will not hydrate and thicken until the pH is dropped below 7. The critical pH at which gelation occurs is modified by the concentration of dissolved salts. The effect of dissolved salts is to change the pH at which a sufficient quantity of dissociated borate ions exists in solution to cause gelation.
Derivatives of guar gum tend to react less and less with borate ions as the amount of substituting groups increases in the molecule. This results because the shear bulk of substituting groups changes the regular, alternating, and single-member branched, linear configuration of the molecule and prevents adjacent chains from approaching as closely as before and the substitution of secondary cis-hydroxyl positions decreases the number of such unsubstituted positions available for reaction.
Gels. A considerable number of reactions other than the borax reactions are routinely used to convert guar and guar derivative solutions to gels. These gels may range from pumpable high-viscosity compositions to solid, rubbery products. The common factor is that they are formed by transition metal complexes through the cis-hydroxyl positions. Derivatization alters the strength of the gels in the same way that it affects the borax reaction.
In the special case where a relatively minor amount of charged substituent (e.g., carboxymethyl) has been introduced into the molecule, this can serve as a useful site for ionic crosslinking of adjacent chains.
Salt Reactions. Strong reactions are also obtained with solutions of certain inorganic cations. The addition of a high concentration of calcium salt, for example, will cause a gel to form under alkaline conditions. If dry powder is added to the salt solution, the gum will not hydrate and thicken. In general, the gum will react with polyvalent cations much as it does with borate anion. Significant differences, however, are that many of the reactions lead to insolubilization, precipitation, or unstable, non-useful gels.
Derivatization with non-ionic hydroxyalkyl groups greatly improves the compatibility of guar with most salts.
Biological Properties
Guar gum has the status of a direct food additive. Solutions of guar gum serve as a food source for the growth of common microorganisms. Where it is necessary to hold solutions for a length of time, common food preservatives, such as benzoic or sorbic acid, may be added to inhibit bacterial growth. In non-food applications, quaternary ammonium preservatives, chlorinated phenolics, or formaldehyde are effective bacterial inhibitors.
The advent of guar derivatives as important commercial products has brought another technique for the preparation of stable solutions. Substitution of the hydroxyl groups alters the structure of the molecule and makes it less suitable as a food for common microorganisms. The more the molecule is altered, the more resistant it becomes to biological attack. The derivatives in wide use today are more resistant than guar to a significant degree. The outlook is for the introduction of derivatives that are stable in solution for long periods of time. They will even resist inoculation with potent cultures that would destroy a guar solution within an hour.
Pending the introduction of completely stable derivatives, in those cases where the bacterial contamination has been allowed to get out of hand and manufacturing equipment contains the residue of preceding batches, it is much easier to thoroughly clean the equipment and start again than to try to control fermentation with preservatives.
Handling
Consideration of the storage of the powdered product and preparation of guar solutions follows:
Dry Storage
The powdered commercial grades of guar gum and its derivatives are all stable in the dry form. In common with other water-soluble polymers, the one condition that adversely affects the gum is allowing it to get wet. As long as it is stored in a dry place, there should be no problem from fermentation or lumping of the powder.
Solution Preparation
Many techniques are available to form smooth, uniform solutions from these cold-water-swelling powders. The principal need is to uniformly disperse and wet each particle. Particles that are not properly separated will stick together as they begin to swell, leading to lumpy, nonhomogeneous solutions requiring abnormally vigorous agitation and time to come to a uniform, fully hydrated state.
Vigorous agitation is the most common means of dispersing rapidly swelling powder. Additional flexibility can be had by selecting coarser-mesh products that swell less rapidly. If other powders are to be added to a solution, the gum may be preblended with these powders, which will assist in ease of dispersion. Similarly, liquids that must be added to a formulation can serve as a carrier for the gum, providing the gum does not swell in the liquid.
For the really difficult cases where agitation is poor and the gum must be added directly to water, there are chemical means to briefly retard the hydration of even the finest-mesh, fastest-swelling gum. These techniques are suitable only for industrial products. Such products are routinely supplied by the manufacturers to meet the specific needs of a customer.
Applications
Guar gum and its derivatives are among the most important water-soluble polymers. Major uses are in the oil and gas, textile, paper, food, explosives, and mining industries.
Oil and Gas
It is common industry practice to increase the productivity of oil and gas wells by cracking open the hydrocarbon-bearing zones with hydraulic pressure. Guar and its derivatives are used in this process, which is known as hydraulic fracturing. High viscosity, at reasonable cost, is required to carry the graded sand which is pumped into the fractured rock. The sand props open the fracture when the hydraulic pressure is released. Oil and/or gas is then recovered at an increased rate because the porous rock containing the hydrocarbon has much more surface area exposed and connected to the well bore through the fracture channels just formed.
Guar products provide the viscosity needed for this operation. They are also compatible with a wide range of field waters and can be formulated to lose viscosity at a controlled rate. This facilitates removal from the well bore when flow is reversed upon completion of the job. Guar products are also useful in controlling fluid lost to the porous formations being fractured and in reducing frictional pressure losses while fluid is being pumped.
Explosives
The last 20 years have seen the growth of a sophisticated technology which uses nitrate salts, various organic and inorganic sensitizing ingredients, water, and a water-soluble crosslinkable thickener as a means of making what are called either slurry explosives or water gel. These compositions are safer to use than previous explosives and have been formulated to meet such a variety of application needs that they are often the most economical way of formulating an appropriate explosive.
Guar gum and its derivatives are used in the formulation of such products. It is the ability of guar products to thicken efficiently under a variety of difficult conditions and to be readily crosslinked or gelled that makes them useful. A properly formulated slurry explosive gel may be anything from a rather loose, cohesive, and pourable gel to a rubbery, almost rigid solid.
Textile
Guar and its derivatives are used as dye solution thickeners in textile printing applications. The derivatives are primarily carboxymethyl and hydroxylalkyl ethers of guar. They are often oxidized under controlled conditions so that the thickening power of the product vs. concentration is brought to a predetermined level. Derivatization promotes solubility. This is useful in preventing the buildup of guar and its derivatives on printing screens and aids in their removal by washing after printing.
Food
This industry has made wide use of guar gum's ability to bind large amounts of water.
Ice Cream. Small amounts of guar gum do not greatly affect the viscosity of the mix during manufacture, but impart a smooth, chewy texture to the finished product. A show meltdown of the product and increased heat shock resistance are other benefits. Ice cream stabilized with guar gum is notably free of the graininess caused by ice crystal formation.
Canned Pet Food. High free-water content is characteristic of this type of product. Guar gum is used to thicken the free water in the product, and the meat and vegetable solids are coated with a thick gravy. Special, slow-swelling grades of guar gum are sometimes used to limit viscosity during the can-filling operation.
Cheese. In soft cheese processing, guar gum controls the consistency and spreading properties of the product. Smoother, more homogeneous cheese spreads with high water content are possible because of the gum's water-binding properties.
Sauces and Salad Dressings. These products make use of the high viscosity at low concentration that is a basic property of guar gum.
Paper
The major use of guar gum is as a wet-end additive. This means that the gum is added to the pulp suspension just before the sheet is formed on either a Fourdrinier machine or a cylinder machine. The pulping process, which is designed to remove lignin and thereby produce a fibrous cellulosic pulp, also removes a large part of the hemicelluloses normally present in the wood. These hemicelluloses, which are mostly mannans and xylans, could contribute greatly to the hydration properties of the pulp and the strength of the paper formed from the pulp. Galactomannans replace or supplement the natural hemicelluloses in paper bonding.
It is generally agreed that the hydrogen-bonding effect is one of the major factors affecting fiber-fiber bonding. An examination of the molecular structure of galactomannans reveals a rigid long-chain polymer molecule with primary and secondary hydroxyl groups. Such molecules are capable of bridging across and bonding to adjacent fibers.
It is difficult to compare the efficiency of locust bean gum and guar gum in paper products because too many variables exist, such as type of gum formulation, pulp type, beating time, and machine conditions. However, many persons in the paper industry believe that guar gum is the more efficient additive.
Commercial locust bean gum and guar gum contain small amounts of hull as contaminants. Locust bean hulls are red-brown and in white sheets, and appear as small but visible specks. However, guar hull is almost white. When present in the paper sheet, it is indistinguishable from the bleached pulp.
Advantages gained by the addition of galactomannans to pulp are:
- Sheet formation: A more regular distribution of pulp fibers (less fiber bundles) improves sheet formation.
- Mullen: Mullen bursting strength is increased.
- Fold strength: Fold strength is increased.
- Pick: Pick is a measure of the force required to pull a fiber from the surface of a sheet. It applies to printing grades of paper. Pick is increased.
- Pulp hydration: Pulp is normally passed through jordans or wet mills which increase the surface of the fiber, thereby allowing it to bind more water. Galactomannans added to a pulp aid in the binding of water and decrease the amount of refining necessary, thereby lowering power consumption.
- Finish : Finish is improved, as measured by the smoothness and amount of protruding fibers.
- Porosity: Porosity is decreased.
- Flat crush: The pressure required to crush a corrugated flute is increased.
- Machine speed : Machine speed is increased without losing desirable tested properties.
- Retention of fines : Retention of fines is increased. Recently, cationic derivatives of guar have been developed with outstanding ability to increase drainage and fines retention.
Mining
In this industry, guar gum and its derivatives are widely used as flocculants to produce liquid-solids separations. These may be broadly classified as filtration, settling, or clarification of mineral slurries. The property used is the ability of the gums to adsorb on the hydrated mineral particles by hydrogen bonding, followed by agglomeration as a result of bridging. Guar gum is also used in flotation to recover base metals. Guar gum acts as a depressant for talc or insoluble gangue mined along with the valuable minerals.
As an illustration of the use of guar products as flocculants, consider the case of an ore ground to a desirable particle size, leached to solubilize a valuable mineral, and then fed to a series of thickeners to separate the pregnant solution from fine solid waste. When dilute guar solutions are added to the leached ore, settling takes place within the thickeners. The rate at which this process takes place is governed by the slowest settling velocity in the thickeners. In turn, this depends on particle size, which is governed by the ability of guar molecules to form large flocs by first adsorbing on the hydrated solids and then causing them to agglomerate by bridging.
Settled solids flowing from the thickeners may be further dewatered by filtration. Guar products increase the permeability of the filter cake, resulting in an increased filtration rate. The floc formed is also incompressible and is readily penetrated by wash water. The cake is readily handled and transported by conveyor belts without decrepitation or dusting. The pregnant solution of this illustration may be further clarified before passing to metal recovery by treating it with dilute guar solution and allowing flocculated solids to settle, leaving behind clarified supernatant.
The terms settling, filtration, and clarification, then, usually relate to the individual steps of an overall mining recovery or wastewater treatment operation, and the terminology is governed by the intent of the particular step in that operation. Improvement of the operation by flocculation of solids is the common denominator.
In flotation operations the ore is ground to a desirable particle size and slurried in water prior to treatment. When guar or guar derivative is added as a dilute solution to the slurry, the gum adsorbs on the hydrated surfaces of the unwanted talc or gangue. Reactive chemicals called collectors are then added to the slurry and they react with the desirable minerals rather than the talc or gangue. The collectors condition the mineral surfaces so that the minerals will rise to the surface when a frother is added and air is bubbled through the slurry. Froth is skimmed off, separating the values from the talc or gangue that has been depressed by the guar product.
COMMERCIAL APPLICATIONS: Compounding and Formulating
The use of guar gum products is primarily in food or explosive applications.
TABLE - 4
Maximum Usage Levels Permitted
Food (as served) | Percent |
---|---|
Baked goods and baking mixes | 0.35 |
Breakfast cereals | 1.2 |
Cheese | 0.8 |
Dairy products analogs | 1.0 |
Fats and oils | 2.0 |
Gravies and sauces | 1.2 |
Jams and jellies | 1.0 |
Milk products | 0.6 |
Processed vegetables and vegetable juices | 2.0 |
Soups and soup mixes | 0.8 |
Sweet sauces, toppings, and syrups | 1.0 |
All other food categories | 0.5 |
Food
Table-4 lists permissible use levels under FDA regulation 184.1339.
No stabilizer is composed entirely of guar gum. Guar derivatives are not presently permitted in food products. Use of the gum is further regulated under Section 170.3 of the Food and Drug Administration as to its function in specific food products.
Explosives
Slurry explosive formulations are best left to those skilled in the art, working under properly controlled conditions.
COMMERCIAL USES: Processing Aids
Oil and Gas
An oil or gas well can be fractured with a solution containing up to about 1% (by weight) of a guar product by supplying sufficient hydraulic horsepower to overcome the overburden pressure and crack the rock. The fracture thus formed is extended outward as far as possible by maintaining pressure and pumping the fluid, which contains graded sand, into the fracture. The sand props open the fracture when the operation is complete.
Textile
As discussed earlier, guar and guar derivatives are widely used in printing and dyeing applications as thickeners to control the mobility of dyestuffs. In some cases the viscosity they develop controls the volume of dye feed. The derivatives are largely hydroxyalkyl and carboxymethyl products, sometimes oxidized to varying degrees to control their thickening power. Locust bean gum products compete directly with guar gum products in this area, and the choice is usually governed by economics since such things as flow, viscosity, and solubility can be altered at will.
The following discussion of applications in the carpet industry illustrates the wide range of techniques in current practice. Similar techniques would apply to flat goods after taking into account the differences in construction of flat goods vs carpets.
Carpets
There are two use areas for gums in the carpet industry; one is dyeing and the other is printing. Some carpet yarns (primarily the spun yarns) are stock-dyed or package-dyed. In package-dyeing, gums are used at very low concentrations (0.1 to 0.2%) as migration control agents to produce a more even distribution of dye in the package.
Most of the carpet yarns are dyed after the carpet is formed, either by the beck method, or where long runs of the same shade are involved, by the newer continuous-dyeing machines. Beck dyeing is done by the exhaustion of dyes onto the fiber and requires no gum, but with one exception all of the newer continuous-dyeing machines use gum as the viscosity control to regulate the pickup of dye on a polished stainless steel roller immersed wire dye peed pan. This film of dye is continuously knifed off and cascaded in a sheet across the width of the carpet just prior to the fixation process, which takes place in a steaming chamber. During the steaming operation, the gum content of the dye solution serves to control the migration of the dye molecules so that a level shade is obtained from side to side of the carpet and also from the surface to the backing of the carpet.
Very-high-viscosity gums are used in this application so that an extremely low percentage of gum can be employed to maintain the critical viscosity level. The actual viscosity of the dye solution is low, in the range of 0.02 to 0.03 Pa.s (20 to 30 cP), and the concentration of gum used is in the area of 0.20 to 0.25%. This low level of gum is an advantage since there is less gum to wash off after the dyeing operation.
Carpet printing is done by various methods and the gum requirements vary with the method. Space printing is a technique originated some years ago. Essentially space printing is the production of a completely random distribution of a number of colors to produce a "pepper and salt" type pattern. The original patented process consisted of printing a geometrical distribution pattern on either flat or tubular knotted fabric and, after fixation of the color, deknitting and winding on cones. This printed yarn was then supplied to tufters to produce the patterned carpet. Other methods have been developed to produce similar effects by warp sheet printing, splatter printing of droplets of color, and computer-programmed distribution of color through nozzles or by pressure bars.
All of these methods require a gum thickener, and the thickener must have very special characteristics for optimum performance. The thickener should be low in insolubles content, high in viscosity, easily dispersible to a lump-free paste, extremely soluble for easy washout, produce good apparent color value, and be compatible with auxiliary chemicals and dyes being used.
Gums for space printing are generally used at 0.35 to 0.5%, and the viscosity will be 0.25 to 0.5 Pa.s (250 to 500 cP), depending on the method, fiber, and pattern.
Pattern designs on carpet are produced by two different screen printing techniques; the first and oldest method is by use of flat screen stencils, and the second is by means of rotary screen stencils which are tubular in shape and made of metal, such as nickel or stainless steel.
The flat screen method is somewhat slower than rotary printing but has a wider range of pattern choices. It also takes up more floor space. But if screen damage or blockage should occur, it is easier and quicker to rectify, and so produces less damaged carpet. Flat-bed machines run at speeds in the range of 4.6 to 6.1 linear meters (15 to 20 feet) per minute for most patterns and types of carpet, while rotary machines are capable of speeds of 18 linear meters (60 feet) per minute, or more. Flat-bed machines use medium-viscosity gums for most patterns and may use high-viscosity gums at lower solids under certain special conditions or on certain pattern or carpet types. Rotary machines can run most patterns on the more economical high-viscosity gums, but do require medium-viscosity gums for finer line patterns.
Flat-bed machines generally operate with dye pastes in the range of 0.8 to 7.5 Pa.s (800 to 7500 cP) viscosity depending on the pile type and pattern. The gum percentages may be anywhere between 0.75 and 3%, depending on the type gum and viscosity requirements.
Rotary machines operate in a narrower range of viscosities, 6.5 to 10 Pa.s (6500 to 10,000 cP) using gum concentrations of from 1.25 to 2.5%, depending on the gum type and viscosity requirement.
There are several printing machine types which do not fit the description of either the flat-bed or rotary which are also capable of producing pattern effects. These are : (1) the modified roller type which uses raised patterns on a series of rolls arranged radially around a central cylinder, (2) the jet nozzle type which feeds color through jet tubes programmed to produce the pattern required, (3) the reverse dip method machine which feeds carpet with the pile face down and applies color by compartmented reservoirs which rise and fall as the carpet traverses, and (4) the pressure bar segmented rollers machine which prints a warp sheet of yarn run between a number of pairs of such rolls using one pair of rolls for each color. These machines all use relatively low-viscosity dye pastes made up with high-viscosity gum at low solids. The gum viscosities will vary from 0.05 to 0.3 Pa.s (50 to 300 cP), and the gum concentration will be in the range of 0.3 to 0.5%.
This area of carpet processing is growing rapidly and innovations are the rule rather than the exception in this particular segment of dye application.
The viscosities mentioned are all by Brookfield RVF Model using the appropriate spindle at 250 C and 20 rpm. Viscosities measured by other means will be considerably different.
Paper
Naturally occurring hemicellulosics, which promote hydration and play an important role in interfiber bonding, are removed during the pulping process. To supplement and replace hemicellulose, the most suitable polysaccharides have proven to be the galactomannan gums, guar and locust bean.
In general, there are two ways to prepare guar or locust bean gum for use; either by cooking or by dry addition.
For mills that do not have and do not wish to install cooking equipment, specially processed products which can be added dry to the beaters or pulpers are available. These products are formulated for ease of dispersibility in the stock, and designed to suit the specific conditions of stock preparation, i.e., temperature, pH, and retention time. They develop full hydration while in the stock at specific rates determined by individual product design.
However, most mills find it easier and more practical to prepare solutions of guar or locust bean gum before addition to the pulp slurry. This enables them to maintain a finer control on the amount of gum being added to their pulp system and also allows them to quickly increase or decrease the amount of additive as needed.
Guar or locust bean gum solutions are prepared by one of two methods: the batch system or a continuous cooking system. Solutions can be prepared in the batch system by dispersing 0.5 to 1.0% of the dry powder in cold water under mechanical agitation, and then heating the dispersion to 900 C to 96°C (195 to 205o F), holding the solution at that temperature for 10 to 20 min. the benefit of a continuous cooker is the preparation of a gum solution on an automatic, continuous basis with lower manpower requirements.
After preparation of guar or locust bean gum solution, it can be added at any convenient point in the stock system that lies after the point of refining and provides good distribution. Since these materials have such a high affinity for adsorption on cellulose, it is recommended that the solution be diluted as much as possible before addition so that a more uniform distribution rate of gum to cellulose can be accomplished.
In most mills, addition in the vicinity of the fan pump offers the best control of the additive process. The rate of delivery of the prepared guar or locust bean gum to the paper machine can best be regulated by use of a rotameter. The normal requirement for attaining measurable improvements is in the range of 1 to 6 kg/metric ton (2 to 12 lb/ton) dry basis, but conditions of the pulp furnish, basis weight, machine speed, stock freeness, etc., will ultimately govern the proper level of addition.
The general benefits gained through the use of guar or locust bean gum vary with the particular paper product being manufactured.
Kraft Papers
A growing use of gums by makers of multiwall bag and gumming grades of kraft paper has shown specific improvements. The rate of addition varies considerably from mill to mill, but is usually 2.5 to 4.5 kg/metric ton (5 to 9 lb/ton). Benefits include:
Improved tensile strength
Improved tear resistance, brought about by reduction of refining made possible by tensile improvement
No adverse effect on porosity
Higher production speeds
Kraft Linerboard
This industry was among the earliest users of guar and locust bean gum and remains so due to the introduction of newer high-speed, high-production paper machines. Guar and locust bean gum products have proved to be the most reliable and effective materials used to improve the Mullen test on this grade of board. Addition rates of 1 to 3 kg/metric ton (2 to 6 lb/ton) are normal in order to accomplish:
Higher speed at equivalent Mullen due to less need for refining, higher freeness, and thus, better drainage
Higher Mullen at reduced basis weights
More uniform Mullen values between top and wire sides
Optimum balance of refining, drainage, drying rates, and Mullen tests in 31.4-kg (69-lb) and heavier-weight boards.
Recycled Linerboard
Galactomannans are almost universally used by producers of this grade of paper, largely because of the use of reclaimed paper and board used in the pulp furnish of this grade. Gums provide the necessary upgrading of quality needed in the finished product. The need for guar and locust bean gum is particularly great in paper mills employing high-temperature, high-pressure dispersion units, but in all cases, gums provide these needed benefits at addition rates of 3 to 6 kg/metric ton (6 to 12 lb/ton). Benefits include:
Higher Mullen
Lower basis weight
Higher production speeds
More economical pulp furnish through use of more recycled paper
Improved finish
Corrugating Medium
Almost all medium made from recycled stock requires an additive to meet their strength tests. Galactomannans are commonly used additives.
The addition rate normally varies from 3 to 6 kg/metric ton (6 to 12 lb/ton). The benefits include:
Higher concorra
Higher speed
Better crush resistance in the finished container
Boxboard
Depending on the individual mill's conditions for stock preparation, specific products are recommended for addition to either beaters or hydropulpers. Usually mills making these grades prefer a product designed for dry addition to the stock at addition rates of 3 to 6 kg/metric ton (6 to 12 lb/ton) of liner stock. Ordinarily no gum is used in the filler portion. The resultant production or product benefits include:
Improved ply bonding
Increased board stiffness
Better formation of top liner
Better bonding strengths on coated grades
Offset News Stock
Paper mills have been able to realize through the use of galactomannans marked benefits in the production of stock for continuous web printing of newsprint at a use level of 1 to 1.5 kg/metric ton (2 to 3 lb/ton). Benefits have included:
Reduction of linting and dusting during paper manufacture
Higher pick values
Less build-up in printing on offset press blankets, permitting more impressions between cleanups.
White Papers
Guar and locust bean gum are used in a wide variety of white papers at addition rates of 1.5 to 4 kg/metric ton (3 to 8 lb/ton). By increasing sheet strength, it is possible to reduce the size concentration at the size press, with resultant improvement in tear, opacity, and calendering.
Gums used in high hardwood furnishes reduce surface picking, improve bonding of vessel segments, and increase fold.
Guar or locust bean gum is used in neutral or alkaline furnishes to improve the retention of calcium carbonate.
Galactomannans are added dry to the beater to reduce the refining time required to develop strength characteristics of rag content paper, particularly banknote.
These products are also very effective in decreasing two-sidedness and thus reducing the tendency of papers to curl.
Where formation is uppermost, gums are used to deflocculate the fiber bundles, closing up the sheet and markedly improving the appearance.
Mining
Guar gum is used as a flocculant to perform liquid-solid separations by means of filtration, settling, and clarification. As a typical filtration illustration, consider the acid leaching of a uranium-bearing siliceous are.
After crushing and grinding to 65% minus 200 mesh, the ore is leached at 55 to 60% solids with sulfuric acid and manganese dioxide at ambient temperature to extract the uranium as a uranyl sulfate complex anion. Some iron and silica also dissolve in the lixiviant, while the bulk of the silicates remain as residue. The pH of the leached slurry is less than 1 and the free acid content is 5 to 15 g/L.
The leached slurry is then distributed to a number of rotary vacuum drum filters using nylon or canvas duck media. Guar gum is added as a 0.1% solution to the leached slurry en route to the filter after hydrating for at least one hour at ambient temperature at a dosage of 0.05 to 0.1 kg/metric ton (0.1 to 0.2 lb/ton) of dry residue solids. This causes the fine residue particles to flocculate by bridging, whence a permeable cake is formed on the filters. The filtrate containing the bulk of the uranium is pumped to the uranium recovery circuit.
The residue from the primary filter is discharged onto a conveyor and dumped into a repulping tank with recycle filtrate from the secondary filter, thereby reducing the concentration of the uranium trapped by the residue. More guar gum is added to the repulped residue as it goes the secondary filter at a dosage of about 0.025 kg/metric ton (0.05 lb/ton). This causes the fine particles to reflocculate by bridging, whence a cake is formed on the secondary filter. Barren wash water is added to the top of the secondary filter to remove most of the entrapped uranium. Part of the secondary filtrate is recycled to the leach and part is used for repulping. The residue cake is conveyed to a tailing dump or goes to pyrite flotation.
A typical settling/clarification illustration follows the filtration example, except that a series of 5 to 6 thickeners are used in countercurrent decantation (C.C.D.) fashion, instead of filters.
After leaching with sulfuric acid and manganese dioxide or sodium chlorate, the leached slurry passes to the launder of a thickener, where it is diluted with return liquor from the next thickener in the C.C.D. series. Guar gum is added as a less than 0.05% solution (having been diluted from 0.5% with barren recycle liquor) at a series of three points spaced about 3 m (10 ft) from the thickener well at a dosage of 0.05 to 0.1 kg/metric ton (0.1 to 0.2 lb/ton) of dry solids. The overflow of the first thickener goes to metal recovery if the solution is clear. If not, some cationic guar gum is added to this solution prior to filtration on a diatomaceous earth filter to remove the fine colloidal silica. Another device is to pass this solution to which cationic guar has been added to a large settling tank for clarification prior to metal recovery.
The residue is removed from the first thickener by a diaphragm or centrifugal pump which causes some degradation of floc, and is pumped to the next thickener in the C.C.D. series. Guar gum is added in a similar manner as the first thickener but at a dosage of 0.025 to 0.05 kg/metric ton (0.05 to 0.10 lb/ton) to refloc the residue. The process is repeated with residue passing from the last thickener and pumped to tailing disposal. Fresh water or barrens are added to the last thickener to compensate for the rich uranium-bearing liquor removed from the first thickener.
Guar gum is used as a talc depressant in mineral flotation operations. As an illustration of a typical application, consider the flotation of pentlandite (Ni-Fe-sulfide) from a high-talc ore containing chalcopyrite, pyrrhotite, pyrite, serpentine, and biotite.
After crushing and grinding to a 90% minus 325 mesh a nickel-pyrrhotite concentrate is removed magnetically, followed by a treatment of the nonmagnetic fraction by flotation.
Flotation feed is diluted to 25% solids at a natural pH of 8.5 to 9.0. Guar gum is added at 0.2 to 0.3 kg/metric ton (0.4 to 0.6 lb/ton) to depress talc. The gum is added as a 0.5% solution hydrating at room temperature for 30 min. This is followed by 0.65 to 0.75 kg/metric ton (1.3 to 1.5 lb/ton) sodium ethyl xanthate as a collector and triethoxybutane as a frother. Rougher concentrate is removed with a total float time of 5 min.
Rougher tails is scavenged for 9 min after the addition of 0.05 to 0.075 kg/metric ton (0.1 to 0.15 lb/ton) guar gum and 0.3 to 0.35 kg/metric ton (0.6 to 0.7 lb/ton)sodium ethyl xanthate. Subsequently, the rougher and scavenger concentrates are combined and floated in the cleaners to produce a final concentrate and a middling recycle. No additional guar gum is used in the cleaners, but 0.15 to 0.2 kg/metric ton (0.3 to 0.4 lb/ton) of sodium ethyl xanthate and triethylbutane are added for a float time of 6 min.
The final concentrate assays 12 to 15% Ni, and the final tails assays 0.2 to 0.4% Ni.
In summary, guar and guar derivatives are used at very low concentrations below the level at which they thicken water. They are used as reagents which bond to hydrated mineral surfaces. In their application as depressants in base metal flotation, they function as agents to block the adsorpation of other reagents on talc and gangue surfaces. In flocculation, guar and guar derivatives adsorb on hydrated mineral surfaces by hydrogen bonding, and cause agglomeration by bridging.
INDUSTRIES USING GUAR GUM
Oil and Gas
Guar gum and guar derivatives are used in the fracturing of oil and gas wells because of their ability to thicken water efficiently at low concentration. They carry the sand or propping agent needed to keep the fracture from closing when the pressure is released. They are reliable polymers that will hydrate in field waters under many conditions.
Explosives
Guar gum and guar derivatives are used in the explosives industry because of their ability to efficiently thicken the nitrate salt solutions which are the basic components of slurry explosive formulations. The gums are readily crosslinked to form stable water-resistant gels.
Food
Guar gum is used in the food industry for its ability to bond and immobilize large amounts of water, thereby contributing to viscosity, inhibiting ice crystal formation in frozen products, modifying product texture, and stabilizing product consistency to changes in temperature. An illustration of the use of guar gum can be found in the manufacture of ice cream where small amounts of gum promote smooth chewy texture, inhibit ice crystal formation caused by heat shock, and impart slow meltdown qualities to the product.
Paper
In the paper-making process, guar gum adsorbs on hydrated cellulosic surfaces. It is a wet-end additive that promotes dry strength, improves sheet formation, and makes manufacturing easier and faster.
Textile
Guar and guar derivatives thicken the dye baths that are used in the printing and dyeing of fibers, fabrics, and carpets. The gums control the rheological characteristics of the dye formulations and permit complex multiple dye patterns that are sharp, bright, and controlled as to penetration.
Mining
In this industry, guar gum is used principally as a flocculant to produce a liquid-solid separation by filtration, settling, and clarification of mineral slurries. The property used is the ability of the gum to adsorb on the hydrated mineral particles by hydrogen bonding followed by agglomeration as a result of bridging.
Guar gum is also used in flotation to recover base metals. Guar gum acts as a depressant for talc or insoluble gangue minerals mined along with the valuable minerals.
FORMULATIONS
Ice Cream
10.0% | Butterfat |
12.0% | Milk, nonfat |
11.0% | Cane sugar |
5.0% | Corn syrup solids (42DE) |
0.3% | Stabilizer/emulsifier |
38.3% | Total solids |
Ice Milk
3.5% | Butterfat |
12.0% | Milk solids, nonfat |
11.0% | Cane sugar |
8.0% | Corn syrup solids(42DE) |
0.45% | Stabilizer/emulsifier |
34.95% | Total solids |
Sherbet
1.0% | Butterfat |
3.0% | Milk solids, nonfat |
20.0% | Cane sugar |
8.0% | Corn syrup solids (42DE) |
0.25% | Stabilizer |
32.25% | Total solids |
Sour Cream
18.0% | Butterfat |
9.0% | Milk solids, nonfat |
0.4% | Stabilizer |
27.4% | Total solids |
Buttermilk
1.0% | Butterfat |
10.0% | Milk solids, nonfat |
0.4% | Stabilizer |
11.4% | Total solids |
Yogurt
1.0% | Butterfat |
12.0% | Milk solids, nonfat |
0.8% | Stabilizer |
13.8% | Total solids |
Instant Imitation Bakery Jelly
30.00% | Modified food starch |
0.50% | Guar gum |
1.30% | Sodium hexametaphosphate |
1.60% | Dicalcium phosphate |
8.20% | Adipic acid |
0.30% | Raspberry flavor |
0.25% | Raspberry Shade |
0.01% | Purple Grade Shade |
0.70% | Potassium sorbate |
57.14% | Sodium benzoate |
100.00% | Total |
Whipping Composition for Frozen Deserts
Parts by Weight | |
50-70 | Sucrose |
3-11 | Modified food starch |
3-6 | Gelatin (200 Bloom) |
0.5-1.5 | Soy protein (degraded) |
1.0-1.5 | Organic food acid |
0.1-0.5 | Sodium hexametaphosphate |
0.2-0.6 | Guar gum |
65.0 | Fructose |
10.5 | Modified food starch |
4.3 | Gelatin (200 Bloom) |
1.0 | Soy protein |
0.6 | Flavor |
1.2 | Citric acid |
0.25 | Salt |
0.2 | Sodium hexametaphosphate |
1.5 | Color |
0.2 | Guar gum |
Add Your Comments
You must log in to your account to submit a review. Click here to log in.
About NIIR PROJECT CONSULTANCY SERVICES |
NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.
Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.
NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.
X
Have a business idea? Let’s make it
happen together-contact us now!