Introduction:
Edge banding, also known as edge banding, is a finish carpentry process and a narrow strip of material used to produce sturdy and aesthetically pleasing trim edges. PVC, which is created by combining, calendaring, vacuum moulding, and other methods, is the key component of PVC edge banding strip. Furniture, office, kitchenware, teaching equipment, and civil engineering are only a few of the industries that use our products.
Related Book: – Detailed Project Profiles on Hi-Tech Plastic Products
Thicknesses range from 0.3 to 3mm, and widths range from 12 to 80mm. Smooth surface, no blistering, no stretch marks, mild glossiness, flat surface and back, uniform thickness, consistent width, fair hardness, high elasticity, good quality, solid wear resistance, edge banding side colour is similar to surface colour after trimming.
Uses of PVC:
Edge banding is a thin material that is used to seal plywood’s exposed and raw edges. On one side, heat sensitive adhesive is applied to the board, while the other side serves as a dirt and moisture barrier. When using Pressure Laminated and Melamine Cabinets, PVC edge banding is the most common choice. With the popularity of modern European cabinetry on the rise, cabinets with glossy or colourful finishes are becoming more common. Edge banding made of PVC (polyvinyl chloride) is a thermoplastic resin that is both versatile and durable.
PVC bands can be used on almost any form of wood, but the thickness of the band can vary. To ensure strength and longevity, it is critical to use the appropriate band for the material. Kitchen, bedroom, bathroom, and office furniture may all benefit from edge banding. Edging will help the consumer adjust the design and look of the grain in the wood when used in wood projects. Edge bands provide a variety of functions for your furniture. First, it acts as a de facto seal on the edge of the core material, keeping moisture out. Second, by offering impact resistance, edge banding increases longevity and resilience. If you use solid wood edging, it may also contribute to the overabundance.
Production Process:
PVC Edge Band Manufacturing Process Steps:
- Material Mixing And Batching
- Extrusion
- Sculpture
- Cooling
- Vacuum Calibration
- Printing
- UV Defence
- Infrared Dryer
- Final PVC Edge Band Rolling/Cutting
Related Videos: – plastic products
Heat tolerance, oil resistance, high hardness, abrasion resistance, and excellent bendability are all characteristics of PVC edge banding. The surface can be printed with different patterns, such as natural wood or some other wonderful design, and the surface can also be laminated or hot stamped with different patterns. The recycled PVC edge banding is environmentally friendly. It’s widely used in beds, cabinets, doors, and windows, as well as office furniture, shelves, and machinery.
Market Outlook:
The PVC Edge Banding industry is one of the markets that has attracted a lot of attention from investors. In the coming years, the global PVC edge banding market is expected to expand. Edge banding is also one of the most effective and dependable methods for covering the raw edge of wooden panels used in new furniture.
Market Research: – Market Research Report
Due to technological advances and R&D activities, a variety of edge banding products, such as polyvinyl chloride (PVC), wood, and resins, are now available on the market. The booming construction sector, particularly in developing regions such as Asia Pacific, particularly in India, is expected to provide significant opportunities for the current edge banding materials market landscape players.
Key Players:
- OSLO Edge Band Tape
- Fitch Italy PVC Edge Band Tape Manufacturer
- Plastics sheets laminate pvc bord edge band tape
- ANANT Edge Band Tape
- Decolux Pvc Laminate & Edge Band Tape
- PEGASUS EDGE BAND TAPE
