Blog

PVC Pipes Manufacturing Project. Production of Polyvinyl Chloride (PVC) Pipes.

Friday, November 3, 2017

facebook twitter Bookmark and Share

Polyvinyl Chloride (PVC) piping is the most widely used plastic piping material. PVC pipe is manufactured by extrusion in a variety of sizes and dimensions and generally sold in 10' and 20' lengths. PVC pipe is available in both solid wall and cellular core construction. Cellular core construction involves the simultaneous extrusion of at least three layers of material into the pipe wall: a solid outer layer, a cellular core intermediate layer, and a solid inner layer.

Polyvinyl chloride (PVC) pipe is made from a plastic and vinyl combination material. The pipes are durable, hard to damage, and long lasting. They do not rust, rot, or wear over time.

PVC is a polar polymer with strong intermolecular forces; therefore it is rigid at room temperature. On the other hand, when a plasticizer is added upon fabrication, flexible PVC products are obtained. This versatility is a major advantage of PVC.

PVC pipes are used for a variety of purposes e.g. water supply schemes, spray irrigation, deep tube well schemes and land drainage schemes. PVC slotted and corrugated pipes are ideal systems for drainages of water from land where water logging is inevitable. It is widely used by various utility services now-a-days too. The usage of PVC pipes also depends upon the size of these pipes too. It is manufactured in different sizes having innumerable usage value.

The Chief Advantage of PVC are:

·         Resistance to corrosion

·         Light weight

·         Toughness

·         Rigidity

·         Economical in laying, jointing and maintenance

·         Ease of fabrication

The PVC pipes are much lighter than cast iron or A. C. pipes. Because of their lightweight PVC pipes are easy to handle, transport, and install. Solvent cementing techniques for jointing PVC pipe lengths is cheaper, more efficient and far simpler. PVC pipes progressively replacing conventional pipes like G.I., Cast Iron, Asbestos Cement or Stone-ware. PVC pipes are light in weight, rates for use under pressure, easy to install, low frictional loss, low on maintenance cost, and have low frictional loss. PVC pipes do not become pitted or tuberculated and are unaffected by fungi and bacteria and are resistant to a wide range of chemicals.

 

Few Indian Major Players are as under:

·         AML Steel Ltd.

·         Ajanta Tubes Ltd.

·         Anant Extrusions Ltd.

·         Bharat Pipes & Fittings Ltd.

·         Bharat Steel Tubes Ltd.

·         Fine Plast Polymers Ltd.

·         Finolex Industries Ltd.

·         Gwalior Polypipes Ltd.

·         Jadia Pipes (India) Ltd.

·         Jain Tube Co. Ltd.

·         Omega Pipes Ltd.

·         Profitcore Pipes Ltd.

·         Raj Irrigation Pipes & Fittings Ltd.

·         Sudhakar Plastic Ltd.

·         Sudhakar Polymers Ltd.

·         Vindhya Pipes & Plastics Ltd.

·         Vishal Pipes Ltd.

 

Market Outlook

India PVC pipes and fittings Market is expected to reach INR 391 billion by FY’2019

Future growth of India PVC pipes and fittings Market is expected to be led by rapidly increasing population leading to increased demand for agricultural production, expanding housing sector and significant role played by the government in the development of irrigation infrastructure and real estate sector in the country.

PVC pipes and fittings market in India has witnessed constant incline in terms of volume of PVC pipes and fittings produced, year on year.

The exports of PVC pipes and fittings in India have witnessed healthy traction in terms of growth as observed over the past few years. India continues to maintain its leading position as the net exporter of PVC pipes and fittings across the world. The availability of cheap labor and low processing costs has made India a manufacturing hub for PVC pipes and fittings with several multinationals setting up their manufacturing facilities in the country. The export market for PVC pipes in India has grown considerably over the years due to the country’s competence in low cost manufacturing and technically trained manpower.

Global PVC Pipe Market size was valued at $54,246 million in 2015, and is anticipated to grow at a CAGR of 6.7% to reach $85,565 million by 2022. Polyvinyl chloride (PVC) is the third largest selling plastic commodity after polyethylene & polypropylene. It is beneficial over other materials owing to its chemical resistance, durability, low cost, recyclability, and others; thus, it can replace wood, metal, concrete, and clay in different applications. Piping and piping systems are a major application of PVC resin. PVC pipes are manufactured by extrusion method in a variety of dimensions such as solid wall or cellular core construction. These are corrosion resistant, cost-effective, flame resistant, and easy to install & handle, and environmentally sound, with long service life.

PVC pipe has applications in drain-waste-vent (DWV), sewers, water mains, water service lines, irrigation, conduit, and various industrial installations.

Future growth of India PVC pipes and fittings Market is expected to be led by the rising construction of much required residential units and inclining demand of PVC pipes and fittings in agricultural sector to bring in more area under cultivation. This will also be bolstered by the government projects for clean environment and housing for all which includes a large focus on the sanitation facilities for the people.

The Indian PVC pipes and fittings industry, which comprises of segments such as RPVC, PVC and CPVC pipes and fittings has grown significantly over the last few years due to the increase in the demand from irrigation sector on account of the burgeoning population and uncertain weather conditions in the country. The PVC pipes and fittings industry in India is highly fragmented.

“PVC pipes will gradually replace conventional piping systems in the market due to their lower cost and higher durability. CPVC pipes are expected to register fastest growth in terms of the production capacity in the next 5 years from FY’2015-FY’2020. Rising acceptance of CPVC pipes over galvanized or PVC pipes will lead to the growth in the future.

 

See more

https://goo.gl/z6J16B

https://goo.gl/DxM9jG

https://goo.gl/soVCd3

 

Contact us:

Niir Project Consultancy Services

An ISO 9001:2015 Company

106-E, Kamla Nagar, Opp. Spark Mall,

New Delhi-110007, India.

Email: [email protected]  , [email protected]

Tel: +91-11-23843955, 23845654, 23845886, 8800733955

Mobile: +91-9811043595

Website: www.entrepreneurindia.co  , www.niir.org

 

Tags

PVC Pipe Production, PVC Pipe Manufacturing Process, PVC Pipe Making Process, How to Start PVC Pipe Manufacturing Business, PVC Pipe Manufacturing Unit, PVC Pipe Plant, PVC Pipe Production Process, How is PVC Pipe Made?, PVC Pipe Manufacturing Business Plan, Plastic Pipe Production, PVC for Piping Industry, PVC Pipe Manufacturing, PVC Pipe Making Business, PVC Pipe Production Plant, PVC Pipes Manufacturing Unit in India, Production of PVC Pipes, PVC Pipe Manufacture, PVC Pipe Manufacturing Industry, Project Report on PVC Pipe Manufacturing Unit, Project Report on PVC (Polyvinyl Chloride) Pipes Manufacturing Industry, Start PVC Pipe Manufacturing Factory, PVC Pipe Production Plant, Plant for PVC Pipes Production, Pipe Manufacture In India, Polyvinyl Chloride (PVC) Production and Manufacturing Process, Manufacturing of PVC Pipes, Making of PVC Pipes, PVC Pipe Factory, How to Make PVC Pipe, PVC Pipes Manufacturing Project Report, Start PVC Pipe Manufacturing Plant, PVC Pipe Manufacturing project ideas, Projects on Small Scale Industries, Small scale industries projects ideas, PVC Pipe Based Small Scale Industries Projects, Project profile on small scale industries, How to Start PVC Pipe Manufacturing Industry in India, PVC Pipe Manufacturing Projects, New project profile on PVC Pipe Manufacturing industries, Project Report on PVC Pipe Manufacturing Industry, Detailed Project Report on PVC Pipe Manufacturing, Project Report on PVC Pipe Manufacturing, Pre-Investment Feasibility Study on PVC Pipe Manufacturing, Techno-Economic feasibility study on PVC Pipe Manufacturing, Feasibility report on PVC Pipe Manufacturing, Free Project Profile on PVC Pipe Manufacturing, Project profile on PVC Pipe Manufacturing, Download free project profile on PVC Pipe Manufacturing, Industrial Project Report,  Project consultant, Project consultancy, NPCS, Niir, Process technology books, Business consultancy, Business consultant, Project identification and selection, Preparation of Project Profiles, Startup, Business guidance, Business guidance to clients, Startup Project for PVC Pipe Manufacturing, Startup Project, Startup ideas, Project for startups, Startup project plan, Business start-up, Business Plan for a Startup Business, Great Opportunity for Startup, Small Start-up Business Project, Project report for bank loan, Project report for bank finance, Project report format for bank loan in excel, Excel Format of Project Report and CMA Data, Project Report Bank Loan Excel, Detailed Project Plan Report


blog comments powered by Disqus



About NIIR

Hide ^

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search


Search Blog