Power, Energy generation, Distribution, Production and related Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 1 of 4 | Total 37 projects in this category
«   Page 1 2 3 4   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Wind Mill - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Non-conventional and renewable sources of energy have come to assume tremendous significance both as alternative or substitute and also as viable supplement to conventional sources of energy. The need for development of non-conventional sources has been strengthened in view of the increasing population, faster pace of economic development and industrialization and gradual depletion of the conventional fossil based energy sources. Along with it the growing concern of the environmental activities has forced governments all over the world to think of ways to tap and generate additional sources of energy to meet the growing demands of the teeming millions. There is good scope of wind mill. A new strategy to attract private investment in commercial projects was adopted.
Plant capacity: 30 Nos./DayPlant & machinery: Rs. 17 Lakhs
Working capital: Rs. 86 LakhsT.C.I: Rs. 137.0 Lakhs
Return: 52.70%Break even: 40.81%
Add to Inquiry Add to Inquiry Basket

Power Project For Glass Industry - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost & Revenue

Glass industry in India is one of the prime industry where much more power is utilizing for controlling the production of glass continuously. It is necessary to regular supply of power in the industry. On that base it is best to produce captive power in their own industry. Now government wants to increase the captive power project as well as they increase the power production by using non-conventional source of energy power from the waste utilization and solar energy. India support an installed capacity of 79, 187MW the maximum peak availability is only 53000MW, entailing a supply deficit of 9% and 21% peaking shortage. India requires 1.4 lakhs MW of additional capacity in the next 15 years to merely keep pace with the current shortage. This means an investment of nearly $120 billion.
Plant capacity: 110 MW/DayPlant & machinery: 453 Lakhs
Working capital: -T.C.I: 494 Lakhs
Return: 56.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Distribution Transformers - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The manufacturing process of distribution transformers are quite similar to the process of power transformers. It consist of laminating cores, enamelled wire, iron and stands etc. The rapid expansion of energy programme of Govt. of India will boost the economy of the country to a great extent. To achieve the required energy, it is essential that all the electrical equipments required for generation, transmission and distribution system must also have potential growth in the country, otherwise, it will be difficult to achieve the target. Transformers play an important role in the development of electrical power in all the fields. Therefore, the growth of transformer industries in the country is of utmost importance.
Plant capacity: 1 Nos./DayPlant & machinery: 40 Lakhs
Working capital: -T.C.I: 209 Lakhs
Return: 43.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

PRE-COMPRESSED PRESSBOARD - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Pre compressed press board is special type board. It has specialty use in the floor of special electrical instrument like transformer. Specification of board is depend upon the specifications of the transformer. Basic raw material used for the manufacturing of pre compressed press board is paper pulp, made by soft wood. Pre compressed press board is used mainly in power and distribution transformers to provide electrical insulation. It is used in the form of sheets, machined components and moulded components in cylinders and caps, as runners and wedges; as spacers and duct strips; as angle rings and cap rings etc. Millions numbers of transformers are required for the distribution of energy to the domestic as well as in the industrial need. For that reason there is need of much more pre compressed press board. A new entrepreneur can well venture into this field.
Plant capacity: 300000 Sq. Mt./AnnumPlant & machinery: Rs. 61 Lakhs
Working capital: -T.C.I: Cost of Project Rs. 157 Lakhs
Return: 38.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

Diesel Generating Sets - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Looking at the huge shortage of electricity supply in the country and at the same time, emphatic need for industrialisations, it can be well understood that D.G. sets for the industrial purposes have become a prime necessity. D.G. sets are today essential requirements. It is becoming popular even for lighting and water supplies at public place like hotels, hospitals, commercial complex, railway station, air ports similar other places for drinking, air-conditioning, lighting and other purposes. Main source of generation of electricity in the country has been thermal power plants, followed by hydro-electric and nuclear plants. All these projects are enormously capital-intensive and take years together to establish them. D.G. sets are available in a wide-range of sizes to suit the requirements of all sizes industrial units and commercial establishment. It can be predicted that there will be a good scope for new entrepreneurs.
Plant capacity: 600 Nos. /AnnumPlant & machinery: 54 Lakhs
Working capital: N/AT.C.I: Cost of Project 209 Lakhs
Return: 41.00%Break even: 66.00%
Add to Inquiry Add to Inquiry Basket

Biogas Power Plant from Cow Dung - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Biogas plants have the ability to accept a wide variety of organic residues as primary fuel input. This includes Cow dung, agricultural residue, effluent discharge, food residue etc. Most agricultural / food production processes have significant amount of organic residues output as by-product. Traditionally, there residues are buried in landfills or discharged, which cause negative environmental impact. In some places, institutions have to pay a fee to dispose off such residues. A biogas plant solves this residue disposal problem by converting residues into usable energy. Biogas is created by bacteria in the process of bio-degradation of organic material under anaerobic (without air) conditions. Methanogens material and return the decomposed products to the environment. In this process biogas (methane) is generated, which is a source of renewable energy. There is a good scope for new entrants.
Plant capacity: 1000 KWh or 1 MWhPlant & machinery: Rs. 485 Lakhs
Working capital: -T.C.I: Rs. 1245 Lakhs
Return: 22.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Solar Pump - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

The energy consumption per capita throughout the world is rapidly increasing. Solar energy is considered to be unlimited source of energy. Energy is a key ingredient for the overall development of an economy. Pumps are known for their preferential use in transportation of water, liquid chemicals, slurry and similar other fluids of varying viscosity. The pumps are generally driven by electric motors. Increasing shortages of electricity, frequent power cuts and problem of setting of nuclear energy plants, have necessitated the use of some non-conventional energy in various equipments and appliances. Solar energy is an answer to all the energy related problems. It can be concluded that there is a good scope for any new entrepreneur.
Plant capacity: 12 Nos. / dayPlant & machinery: Rs. 17 Lakhs
Working capital: -T.C.I: Rs. 288 Lakhs
Return: 47.00%Break even: 28.00%
Add to Inquiry Add to Inquiry Basket

BIO MASS GASIFICATION POWER PLANT - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Plant Layout

Bio-gas power plant is one of the sources of non-conventional energy. The biomass fuels are solid carbonaceous materials derived from living plants and animals. There is availability of waste material in our country, producer gas can be easily converted to energy. It can be used for providing electricity in nearer or furthest area. It can also be used to run plant and machineries in the industry. Economic development results in both qualitative and quantitative increase in the use of energy. In India, it is estimated that of the 68.3 million tonnes of carbon released annually due to biomass burning, fuel wood accounts for 82.3%. It will be profitable for any new entrant to invest in this field.
Plant capacity: 1000 KWh or 1 MW.Plant & machinery: 475 Lakhs
Working capital: -T.C.I: 691 Lakhs (W/c. One Month)
Return: 12.00%Break even: 66.00%
Add to Inquiry Add to Inquiry Basket

POWER TRANSFORMER UPTO 40 MVA - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Over the past hundred years transformers have played a major role in the growth of almost all industries in the world. The transformer is a device that transfers electricity or energy from one electric circuit to another without change of frequency and usually, but not always, with a change in voltage. The transformers with rating more than 16, 000 KVA are called power transformers and those having rating upto 16,000 KVA or less are called distribution transformers. Both are used for transmission and distribution of electricity. Distribution transformers are used to modulates the voltage as per the need of consumers. The new comer can well venture in this field.
Plant capacity: 1 No./dayPlant & machinery: 61 Lakhs
Working capital: -T.C.I: 717 Lakhs
Return: 52.00%Break even: 30.00%
Add to Inquiry Add to Inquiry Basket

Power Cable - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Electrical power cables used for transmission and distribution purposes consist of conductors stranded from plain high conductively annealed copper wires insulated with oil impregnated paper tapes. Under ground construction is necessitated in the more density built up portions of cities by the heavy transformers and lines required and by the multiplication of service connections to buildings. PVC coated cables and wires are extensively used in all electrical linings, domestic lightings and all other purposes. According to the present policy of the India Government, this time, PVC coating on electric cables and wire is exclusively reserved for development in small scale sector or in the cottage industries. The demand for PVC coating electrical wires is increasing at a rapid rate. There is a bright scope for starting new units in this field.
Plant capacity: 2050 MT Aluminium Power Cable/Annum 350 MT Copper Power Cable/AnnumPlant & machinery: Rs. 80 Lakhs
Working capital: -T.C.I: Cost of Project Rs. 305 Lakhs
Return: 45.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 1 of 4 | Total 37 projects in this category
«   Page 1 2 3 4   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.

NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search


Search Project Report & Profiles





Subjects