Best Business Opportunities in Tamil Nadu- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Automotive Industry: Project Opportunities in Tamil Nadu



The automotive industry in India is one of the largest in the world and one of the fastest growing globally. India's passenger car and commercial vehicle manufacturing industry is the seventh largest in the world, with an annual production of more than 3.7 million units in 2010. Automotive industry is the key driver of any growing economy. It plays a pivotal role in country's rapid economic and industrial development. It caters to the requirement of equipment for basic industries like steel, non-ferrous metals, fertilisers, refineries, petrochemicals, shipping, textiles, plastics, glass, rubber, capital equipments, logistics, paper, cement, sugar, etc. It facilitates the improvement in various infrastructure facilities like power, rail and road transport. Due to its deep forward and backward linkages with almost every segment of the economy, the industry has a strong and positive multiplier effect and thus propels progress of a nation. The automotive industry comprises of the automobile and the auto component sectors.



Tamil Nadu is being popularly hailed as “Detroit” of India as it has a large Automobile and Ancillary sector. Automobile industry plays a crucial role in the State economy and has been one of the key driving factors, contributing 8% to State GDP and giving direct employment to 2,20,000 people. More than100 companies in the Automotive and Auto Ancillary industry are located in this state, maintaining highest production norms by implementing internationally recognized quality standards. Chennai has emerged as India's largest automobile and auto components exporter in India. Hyundai has made Chennai the manufacturing and export hub for its small cars. Tamil Nadu has the largest auto components industry base. Currently, Tamil Nadu accounts for above 32% of India's production capacity. Automobile manufacturers operate "Just - in-Time" avoiding inventory costs. The state has a well-developed automotive and auto component industry. It is the hub of Indian automobiles industry. Several automobile and automobile ancillary units are located in Tamil Nadu. It has manufacturing facilities across the automotive spectrum from tractors to battle tanks. Global auto majors like, Hindustan Motors and Mitsubishi have commenced production plants. Ashok Leyland and TAFE have set up expansion plants in Chennai. Fortune 500 companies such as Hyundai and Ford have established manufacturing facilities in the state.



Government brought out a very innovative Policy "Ultra Mega Policy for Integrated Automobile Projects" that offers a very attractive package of support to automobile projects investing more than Rs.4000 Crores. As a result of this Policy, since May 2006, investments attracted by Tamil Nadu is automobiles & components manufacturing is Rs.21900 Crores, almost 5 times of the Investments attracted during previous 15 years (May 1991-April 2006). The total employment potential in these new projects is: 1.20 lakhs (direct + Indirect). Govt of India is currently implementing a project "National Automotive Testing R&D Infrastructure Project" (NATRIP) in Oragdam near Chennai at a project cost of about Rs.450 Crores. This project aims at facilitating introduction of world-class automotive safety, emission and performance standards in India as also ensure seamless integration of our automotive industry with the global industry.


Textile: Project Opportunities in Tamil Nadu



The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.


Tamil Nadu has traditional strengths in the textile sector. In the post-quota abolition regime, the Textile Industry has tremendous opportunities for growth as well as challenges to be met. Availability of cotton at fair prices and at right quality, the backlog in modernization, supply of inputs particularly credit and power at reasonable rates etc. are all essential for the textile industry to be competitive in an increasingly uncertain trading environment. The Handlooms, Power looms, Hi-Tech Weaving Parks, Garments & Hosiery, Processing Apparel Park are important components of the textile industry.



The Ministry of Textiles in India has formulated numerous policies and schemes for the development of the textile industry in India. The government of India has been following a policy of promoting and encouraging the handloom sector through a number of programmes. Most of the schematic interventions of the government of India in the ninth and tenth plan period have been through the state agencies and co-operative societies in the handloom industries. Some of the major acts relating to textile industry include: Central Silk Board Act, 1948, The Textiles Committee Act, 1963, The Handlooms Act, 1985, Cotton Control Order, 1986, The Textile Undertakings Act, 1995Government of India is earnestly trying to provide all the relevant facilities for the textile industry to utilize its full potential and achieve the target. The textile industry is presently experiencing an average annual growth rate of 9-10% and is expected to grow at a rate of 16% in value, which will eventually reach the target of US $ 115 billion by 2012. The clothing and apparel sector are expected to grow at a rate of 21 %t in value terms.


Leather: Project Opportunities in Tamil Nadu



Leather Industry occupies a place of prominence in the Indian economy in view of its massive potential for employment, growth and exports. There has been increasing emphasis on its planned development, aimed at optimum utilisation of available raw materials for maximising the returns, particularly from exports.  The leather and leather products industry is one of India’s oldest manufacturing industries that catered to the international market right from the middle of the nineteenth century. The leather industry employs about 2.5 million people and has annual turnover of Rs. 25,000 crores. India is the third largest leather producer in the world after China and Italy


Leather industry in Tamil Nadu is considered to be very ancient and some say it is of more than two centuries old. The state accounts for 70 per cent of leather tanning capacity in India and 38 per cent of leather footwear and components. The exports from Tamil Nadu are valued at about US $ 762 million, which accounts for 42 per cent of Indian leather exports. Hundreds of leather and tannery industries are located around Vellore, Dindigul and Erode its nearby towns such as Ranipet, Ambur, Perundurai, Nilakottai and Vaniyambadi. The Vellore district is the top exporter of finished leather goods in the country. That leather accounts for more than 37% of the country's Export of Leather and Leather related products such as finished leathers, shoes, garments, gloves and so on. The tanning industry in India has a total installed capacity of 225 million pieces of hide and skins of which Tamil Nadu alone contributes to an inspiring 70%. Leather industry occupies a pride of place in the industrial map of Tamil Nadu. Tamil Nadu enjoys a leading position with 40% share in India's export.


Government policies in support of the industry:

• The entire leather sector is now de-licensed and de-reserved, paving way for expansion on modern lines with state-of-the art machinery and equipment

• 100% Foreign Direct Investment and Joint Ventures permitted through the automatic route

• 100% repatriation of profit and dividends, if investments made in convertible foreign currency. Only declaration to this effect to the Reserve Bank is required.

• Promotion of industrial parks (one leather park in Andhra Pradesh, one leather goods park in West Bengal, one footwear park in Tamil Nadu and one footwear components park in Chennai).

• Funding support for modernizing manufacturing facilities 

• Funding support for establishing design studios

• Duty free import of raw materials (namely raw skins, hides, semi finished leather and finished leather) and of embellishments and components under specific scheme

• Concessional duty on import of specified machinery for use in leather sector

• Duty neutralization / remission scheme

Food Processing: Project Opportunities in Tamil Nadu



India is the world's second largest producer of food next to China, and has the potential of being the biggest with the food and agricultural sector. The Indian food processing industry stands at $135 billion and is estimated to grow with a CAGR of 10 per cent to reach $200 billion by 2015. The food processing industry in India is witnessing rapid growth. In addition to the demand side, there are changes happening on the supply side with the growth in organised retail, increasing FDI in food processing and introduction of new products. India's food processing sector covers fruit and vegetables; meat and poultry; milk and milk products, alcoholic beverages, fisheries, plantation, grain processing and other consumer product groups like confectionery, chocolates and cocoa products, Soya-based products, mineral water, high protein foods etc.


Tamil Nadu has historically been an agricultural state and is a leading producer of agricultural products in India. In 2008, Tamil Nadu was India's fifth biggest producer of Rice. The total cultivated area in the State was 5.60 million hectares in 2009-10. The state is the largest producer of bananas, flowers, tapioca, the second largest producer of mango, natural rubber, coconut, groundnut and the third largest producer of coffee, sapota, Tea and Sugarcane. Tamil Nadu's sugarcane yield per hectare is the highest in India. Among states in India, Tamil Nadu is one of the leaders in livestock, poultry and fisheries production. Tamil Nadu had the second largest number of poultry amongst all the states and accounted for 17.7% of the total poultry population in India. With the third longest coastline in India, Tamil Nadu represented 27.54% of the total value of fish and fishery products exported by India in 2006.


Tamil Nadu government has come out with following policies :

·         Raise in processed foods in the market from 1% to 10%.

·         Raise value addition levels from 7% to 30 %

·         Food processing industry is one of the growing areas identified for exports. Free Trade Zones (FTZ) and Export Processing Zones (EPZ) have been set up with all infrastructures. Also, setting up of 100% Export oriented units (EOU) is encouraged in other areas. They may import free of duty all types of goods, including capital foods.

·         Capital goods, including spares up to 20% of the CIF value of the Capital goods may be imported at a concessional rate of Customs duty subject to certain export obligations under the EPCG scheme, Export Promotion Capital Goods. Export linked duty free imports are also allowed.

·         Units in EPZ/FTZ and 100% Export oriented units can retain 50% of foreign exchange receipts in foreign currency accounts.

·         50% of the production of EPZ/FTZ and 100% EOU units is saleable in domestic tariff area.

Paper industry: Project Opportunities in Tamil Nadu



Paper Industry in India is riding on a strong demand and on an expanding mood to meet the projected demand of 8 million tons by 2010 & 13 million tons by 2020. The Indian Paper Industry is a booming industry and is expected to grow in the years to come. The usage of paper cannot be ignored and this awareness is bound to bring about changes in the paper industry for the better. It is a well known fact that the use of plastic is being objected to these days. The reason being, there are few plastics which do not possess the property of being degradable, as such, use of plastic is being discouraged. Excessive use of non degradable plastics upsets the ecological equilibrium. The Paper industry is a priority sector for foreign collaboration and foreign equity participation upto 100% receives automatic approval by Reserve Bank of India. Several fiscal incentives have also been provided to the paper industry, particularly to those mills which are based on non-conventional raw material.


Tamil Nadu continues to be one of the forerunners in the production of paper and paper products. There are 74 paper mills in operation in Tamil Nadu. The total paper production was 3.7 lakh tonnes in 2005 06 which accounts for 17.30% share of the national production, next only to Andhra Pradesh.  As the country’s forest cover is much below the desired level, the Government of Tamil Nadu established TNPL in 1979 to manufacture newsprint and paper using bagasse (sugarcane waste) as the primary raw material. This is the largest paper mill in India with an installed capacity of 230,000 TPA. Tamil Nadu Newsprint and Papers Limited (TNPL) was established by the Government of Tamil Nadu to produce newsprint and writing paper using bagasse, a sugarcane residue.


Several policy measures have been initiated in recent years to remove the bottlenecks of availability of raw materials and infrastructure development. To bridge the gap of short supply of raw materials, duty on pulp and waste paper and wood logs/chips have been reduced. In the year 1979, Government of Tamil Nadu established Tamil Nadu Newsprint and Papers Limited as a public limited company under the Companies Act, 1956. Commencing production in 1984, with the support of Government of Tamil Nadu, the company has made rapid strides and has emerged as the largest paper mill in India at a single location. With the on-going expansion plan to increase paper production capacity from the present 2.45 lakh tons to 4 lakh tons per annum, TNPL is poised to become a Rs.2000 crores company by 2011-12.

Cement Industry: Project Opportunities in Tamil Nadu



India is the second largest producer of quality cement in the world. The cement industry in India comprises 139 large cement plants and over 365 mini cement plants. Industry's capacity at beginning of the year 2008-09 was 198.30 million tonne (MT) which increased to 219 MT at the close of the year. The initiatives provided by the Government of India to various infrastructure projects, road network and housing activities will provide required stimulus towards the growth of cement industry in India. Domestic demand for cement has been increasing at a fast pace in India & it has surpassed the economic growth of the country.


Tamil Nadu is a leading producer of cement in India. It has 13 major cement factories.  It is a home for leading brands in the country such as Chettinad Cements (Karur), Dalmia Cements (Ariyalur), Ramco Cements (Madras Cement Ltd.), India Cements (Sankakari, Ariyalur), Grasim etc. The production of cement in the State increased from 126 lakh tonnes in 2004-05 to 142.89 lakh tonnes in 2005-06 with a growth rate of 13.4% accounting for 10.08 % of cement production at the national level, occupying the 5th place.  However, it may be noted that, the cement production in the private sector has been showing an increasing trend whereas production in the public sector has decreased to 7.85 lakh tonnes from 8.06 lakh tonnes in the public sector for the corresponding period.


Government policies have affected the growth of cement plants in India in various stages. The control on cement for a long time and then partial decontrol and then total decontrol has contributed to the gradual opening up of the market for cement producers. The prices that primarily control the price of cement are coal, power tariffs, railway, freight, royalty and cess on limestone. Interestingly, all of these prices are controlled by government. Cement industry consumes about 5.5bn units of electricity annually while one ton of cement approximately requires 120-130 units of electricity. Power tariffs vary according to the location of the plant and on the production process. The state governments supply this input and hence plants in different states shall have different power tariffs. Another major hindrance to the industry is severe power cuts.


Waste management: Project Opportunities in Andhra Pradesh


Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.



Municipal Solid Waste (MSW) generation in Chennai, the fourth largest metropolitan city in India, has increased from 600 to 3500 tons per day (tpd) within 20 years. The highest per capita solid waste generation rate in India is in Chennai (0.6 kg/d). Chennai is divided into 10 zones of 155 wards and collection of garbage is carried out using door-to-door collection and street bin systems. The collected wastes are disposed at open dump sites located at a distance of 15 km from the city.  Recent investigations on reclamation and hazard potential of the sites indicate the need for the rehabilitation of the sites.  Chennai is the first city in India to contract out MSWM services to a foreign private agency- ONYX, a Singapore based company. The scope of privatization includes activities such as sweeping, collection, storing, transporting of MSW and creating public awareness in three municipal zones.  ONYX collects about 1100 Metric tons of waste from three zones per day and transports it to open dumps.



National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 11 of 37 | Total 366 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 36 37   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Pencil Sharpeners (Plastic) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Generally, pencil sharpeners can be classified into electric pencil sharpeners and manual pencil sharpeners. Since the electric pencil sharpeners are not frequently used for sharpening pencils, they usually keep in a standby condition, which will consume powers of the batteries and is not environment protective. Conversely, hand-cranked pencil sharpeners are in a large market demand since they do not require any power supply and are compact and portable. The pencil is inserted into the sharpener and rotated while the sharpener is held motionless. The body of the sharpener is often contoured, ridged or grooved to make the small block easier to firmly grip. In a Babcock Duplex Pencil Sharpener, the pencil is inserted into the chuck on the side of the machine. When the crank on top of the machine is turned with the right hand, the gang of six blades rotates, shaving the pencil, while the chuck holding the pencil revolves. As the cutting proceeds, the cutter is advanced toward the pencil by applying pressure on a feed bar with the left hand. The Duplex is 3” tall. Pencil sharpeners are necessary for any office that uses pencils regularly. Place a sharpener in every work area, letting the employees easily maintain their writing instruments. The Indian stationery industry is highly scattered and is largely dominated by the unorganised sector and the situation is quite alarming for the organised players industry. Factors like lack of modern production facilities, unorganised nature of functioning, marginal demands, government policies and international competition are largely contributing to the slow growth of the organised stationery industry in India. Established players are increasing their penetration by launching rural and urban-specific brands with different price tags so as to cater for both markets. The leading players are also increasing their manufacturing capacity to cater for overall growing demand for writing instruments in India. Thus it is a good project for investment.
Plant capacity: 5000 Pcs/DayPlant & machinery: Rs 9 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 24 Lakhs
Return: 27.00%Break even: 72.00%
Add to Inquiry Add to Inquiry Basket

Fiber Optical Cables - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

An optical fiber (or optical fibre) is a flexible, transparent fiber made of extruded glass (silica) or plastic, slightly thicker than a human hair. It can function as a waveguide, or “light pipe”, to transmit light between the two ends of the fiber.Power over Fiber (PoF) optic cables can also work to deliver an electric current for low-power electric devices. The field of applied science and engineering concerned with the design and application of optical fibers is known as fiber optics. Optical fibers are widely used in fiber-optic communications, where they permit transmission over longer distances and at higher bandwidths (data rates) than wire cables. Fibers are used instead of metal wires because signals travel along them with less loss and are also immune to electromagnetic interference. Fibers are also used for illumination, and are wrapped in bundles so that they may be used to carry images, thus allowing viewing in confined spaces. Specially designed fibers are used for a variety of other applications, including sensors and fiber lasers. The extensive use of fiber optic cables in the telecommunications industry has provided the technological and economical platform for practical deployment in many other applications. Current industries using fiber optic cables for demanding security applications include: Aerospace , Bridges , Nuclear Facilities ,Highways and Traffic Intersections , Department of Energy and other areas also. Despite enormous potential generated by the growth of the end-user segments, the cable industry (both sectors - power and telecom cables) has remained sluggish. In the telecom sector, the processes of private entry encountered several policy roadblocks in the early stages. None-theless, the industry is on the move with the telecom sector getting globalised and transformed technologically with the shift from jelly-filled (JFTC) to optic fibre cables (OFC). Out of the total market of telecom cables, JFTC accounts for over two-third, while the balance goes to the optic fibre cables. The industry recorded a very impressive growth of 115% in 2004-05 over the preceding year. Thus, Fiber Optical Cables is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Aksh Optifibre Ltd. • Birla Ericsson Optical Ltd. • Optel Telecommunications Ltd. • Spectra Punjab Pvt. Ltd. • Sterlite Telecables Ltd. • Tamilnadu Telecommunications Ltd.
Plant capacity: 50 KMeters/DayPlant & machinery: Rs 3563 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 4266 Lakhs
Return: 19.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Honeycomb Paper Products (Board, Paper Partition, Pallets & 5 Ply Corrugated Boxes) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials

The manufacture of modern structural honeycombs probably began in the late 1930s when J. D. Lincoln manufactured Kraft paper honeycomb for use in the furniture built by Lincoln Industries in Marion, Virginia, USA. The material was used in sandwich panels which consisted of thin hardwood facings bonded to a relatively thick slice of paper honeycomb. At the outbreak of World War II paper honeycomb was used by the Glen L. Martin Company in radomes - structural enclosures for radar antennas, which were then in their infancy. It was quite successful; however, the paper core did pick up moisture. Martin later developed a honeycomb made of cotton duck fabric and by the end of World War II they had produced honeycomb cores made of cotton fabric, glass fabric and Aluminium foil. The main use of honeycomb is in structural applications. This is because honeycomb sandwich panels are extremely efficient in stiffness-to-weight and strength-to-weight situations. Whenever light weight is a premium honeycomb sandwich construction is very difficult to beat. The use of honeycomb core structure finds application in the following areas : • Aircraft • Aerospace • Transportation • Building construction • Sporting equipment With increasing trends to tighter tolerances and process optimization, the issue of moisture absorption by Honeycomb paper and the effect on its properties needs to be explained. Dimensional changes of Honeycomb paper due to moisture content are relatively small compared to other paper structures. Compared to film structures, however, these changes are significant and need to be taken into consideration at both the design and manufacturing stages. Corrugated fiberboard has more than 100 years of history and features the advantages of low cost, light weight, ease of processing, high strength, and suitability for printing. Apart from meeting the demand for environmental protection by using corrugated fiberboard materials, the works on show at the exhibition also accommodated trends in the furniture design world, using bonding techniques or latch principles. As a whole it is a good project for new entrepreneurs to invest.
Plant capacity: Paper Board:2.50 MT/Day•Paper Partitions:2.50 MT/Day•Paper Pallets:2.50 MT/Day•5 Ply Corrugated Boxes:2.50 MT/DayPlant & machinery: Rs 214 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 480 Lakhs
Return: 26.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

PVC Flex Banner (Frontlit, Backlit & Vinyl) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

PVC flex is made out of PVC and fabric raw material, specially designed for solvent printing industry. It is suitable for indoor and outdoor printing used in billboard, display, banners and exhibition booth decoration. PVC Flex is best to all Digital printer specially designed for Indian market. Due to stable chemical character and excellent ink absorbency, PVC Flex will bring wonderful digital printing images for large format picture advertisements. In virtue of the high classic quality and best sales service, nowadays PVC Flex is playing an important role in signage & Banner Advertising industry. Flex is a sheet of polythene widely used to deliver high quality digital print for outdoor hoardings and banner, mainly printed by large color plotters in CMYK mode. These prints are efficient, Low-cost and durable substitutes of hand painted hoarding and hand written banner. Laminated Backlit flex products are widely used for indoor and outdoor advertisement. Its surface has fine ink absorption which is compatible for all solvent-based printers such as Vutek, Nur, Scitex, etc. With special treatment, the products have a good property of anti-microbial and anti-aging. Backlit flex is a good translucent media material design for backlit displays which perform a high printing quality while printing a single strike image. Its certain finishing treatment makes ideal performance. This market is booming with 25-30% annual growth and is worth around Rs 500-600 crore. PVC is the third-most-used plastic or polymer petrochemical, after polyethylene and polypropylene. Depending on the manufacturing process or polymerisation, there are two types of PVC. Suspension is plain or rigid PVC, used for construction works, while emulsion or paste PVC is used in coating and blending applications. PVC flex is an end-product, used in tarpaulins, canvas and printing. Thus, due to demand it is a good project for entrepreneurs to invest.
Plant capacity: PVC Flex Banner (Frontlit/Backlit) 440 g/m2:13 MT/Day•PVC Flex Banner Vinyl 440 g/m2:12 MT/DayPlant & machinery: Rs 832 Lakhs
Working capital: -T.C.I: Cost of Project Rs 1208 Lakhs
Return: 27.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

SCHOOL (CBSE Pattern) - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project

Education is today identified among basic needs, as essential for an individual’s survival as ‘food, clothing and shelter.’ The need for education has been recognized in all parts of the country and among all sections of society. Education brings success and success translates into social recognition. Though we have developed well in higher education system, a limited infrastructure facility is there in most of the educational institutions. Opening school in India is a herculean task, however more and more people are entering in school business; for the demand for school appears unending in India. The promising business opportunity can be discovered in the light of absence of quality school, growing population, and increasing desire to provide quality education to one’s children. A school is an unique business as it cannot be even termed a business. Schools cannot be set up by private entities. They have to be run by a society formed under the Societies Act of 1860, or a trust under Public Trust Act as existent in different states, or by forming a company under Section 25 of the Companies Act 1956.
Plant capacity: Total Students per Annum:750 Students/AnnumPlant & machinery: Rs 20 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 578 Lakhs
Return: 1.00%Break even: 1.00%
Add to Inquiry Add to Inquiry Basket

Sanitary Napkins - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Technical textiles are defined as textile materials and products used primarily for their technical performance and functional properties rather than their aesthetic or decorative characteristics. Thus Sanitary Napkin comes under Nonwoven fabrics which as a whole come under technical textile. Non woven Fabrics are broadly defined as sheet or web structures bonded together by entangling fibre or filaments (and by perforating films) mechanically, thermally or chemically. They are flat, porous sheets made directly from separate fibres or from molten plastic or plastic film. They are not made by weaving or knitting and do not require converting the fibres to yarn. The Sanitary napkin industry is closely connected with the mode of life, which is in turn directly correlated to housing. Accordingly this industry has always grown by keeping space with improvement in living and it is new indispensable for sanitary in modern housing. A woman will use an average of 10000 pieces of sanitary napkins within 30 to 40 years in her entire lifetime. Having a trusted brand of sanitary napkins has become paramount for every modern woman. Not only must the sanitary napkin provide comfort and safety, but also enhance every woman's health and lifestyle. Thus, due to demand it is a good project for entrepreneurs to invest. Uses Sanitary Napkins are exclusively used by adult girls & Ladies around the world during for maintaining physical aid & to avoid wetting or staining of the clothes. India’s sanitary napkin market has significant profit potential. The demand for such products is stable; purchases are recurring and not subject to normal business cycles. Historically, the price of feminine hygiene products have been relatively expensive, but that is changing as small and large businesses enter the market and make an accessible, lower-priced offering to a wider consumer base. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Carewell Hygiene Products Ltd. • Centron Industrial Alliance Ltd. • Dhanalaxmi Roto Spinners Ltd. • Diapers India Ltd. • Godrej Consumer Products Ltd. • Gufic Biosciences Ltd. • Johnson & Johnson Ltd. • Kimberly Clark Lever Pvt. Ltd. • Mediklin Healthcare Ltd. • Syncom Healthcare Ltd. • Tainwala Personal Care Products Pvt. Ltd.
Plant capacity: 96000 Pcs/DayPlant & machinery: Rs 76 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 325 Lakhs
Return: 29.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Cold Storage with Ice Plant - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project

India is the largest producer of fruits and second largest producer of vegetables in the world. Fruits & vegetables, being perishable in nature require certain techniques of preservation for retaining the freshness intact and making them an acceptable item even after few days of ripening. It also facilitates the farmer to realize a better price instead of selling the product at a throw away price due to the perishability. This necessity as evolved a new concept of storing these items at below or just above sub-zero temperatures known as cold storage. Introduction of Cold storage / Cold room facility will help them in removing the risk of distress sale and simultaneously will ensure better returns. The annual production of fruits and vegetables in the country accounts for 18 to 20% of our agriculture output. Varied agro climatic conditions and better availability of scientific package of practices, there is a vast scope for increasing the production. Cold Storage is a special kind of room, the temperature of which is kept very low with the help of machines and precision instruments. India is having a unique geographical position and a wide range of soil, thus producing variety of fruits and vegetables like apples, grapes, oranges, potatoes, chillies, ginger, etc. Marine products are also being produced in large quantities due to large coastal areas. As per 2008-09 figures, India produces around 215 Million Tons of Fruits and Vegetables, 3 Billion Tons of Marine Products, 109 Million Tons of Milk, 56 Billion Eggs and 38 Million Tons of Meat per annum. Commercially apples, potatoes, oranges, etc are stored on large scale in the cold storages. Other important costly raw materials like dry fruits, chemicals, essences and processed foods like fruit juice/pulp, concentrate dairy products, frozen meat, fish and eggs are also stored in cold storages to regulate marketing channels of these products. Therefore, it is a good project for entrepreneurs to invest. Uses Cold storage is used to preserve fruits and vegetables. Once they are kept in the cold storage, they do not get spoiled even after many months. Sometimes, in production season of certain vegetable or fruit crops, the demand for those thing decreases, which in turn decreases the consumption in surplus amount of that particular item and it is kept in a cold storage. 1. Ice is used in large quantities during summer seasons. 2. It is used in every hotel, restaurant, and other shops. 3. It finds its uses in making sharbats, and others household cold drinks. 4. It is used in chemical industries for different application. 5. Application of ice ranges over many fields such a chemicals, nuclear, fishery and medical. Few Indian Major Players are as under • Allana Cold Storage Ltd. • Anjaneya Cold Storage Ltd. • Asvini Fisheries Pvt. Ltd. • H M G Industries Ltd. • Hindusthan Ice & Cold Storage Co. Ltd. • Ideal Ice & Cold Storage Co. Ltd. • Indagro Foods Ltd. • Jindal Steel & Alloys Ltd. • Karnavati Cold Storage Ltd. • Karnimata Cold Storage Ltd. • Kisan Cold Storage & Refrigeration Service Ltd. • Mohan Meakin Ltd. • Nav Bharat Refrigeration & Inds. Ltd.
Plant capacity: Cold Storage (Service On Rent): 5,000.0 Kgs./ Day•Ice Slab (120 Kgs each Ice Slab):40.0 Slab / DayPlant & machinery: Rs 52 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 243 Lakhs
Return: 28.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Barley Malt - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Barley Malt is germinated cereal grains that have been dried in a process known as "malting". The grains are made to germinate by soaking in water, and are then halted from germinating further by drying with hot air. Malting grains develop the enzymes required to modify the grain's starches into sugars, including the monosaccharide glucose, the disaccharide maltose, the trisaccharide maltotriose, and higher sugars called maltodextrines. Barley Malt also contains small amounts of other sugars, such as sucrose and fructose. Barley Malted grain is used to make beer, whisky, malted shakes, malt vinegar, confections such as Maltesers and Whoppers, flavored drinks such as Horlicks, Ovaltine and Milo, and some baked goods, such as malt loaf, bagels and rich tea biscuits. Malted grain that has been ground into a coarse meal is known as "sweet meal". Various cereals are malted, though barley is the most common. Malting is the process of converting barley or other cereal grains into malt, for use in brewing, distilling, or in foods and takes place in a maltings, sometimes called a malthouse, or a malting floor. Out of the total production of 14.5 lakh MT in the country hardly 10% is used for Malt production. About 5-10% is reportedly used for human consumption and about 4-5% is retained by the farmers as seed. The large quantity of remaining barley is used as feed for the animals. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Haryana Suraj Maltings Ltd. • Jagatjit Industries Ltd. • John Distilleries Pvt. Ltd. • Malt Company (India) Pvt. Ltd. • Maltex Malsters Ltd. • Millennium Beer Inds. Ltd. • National Cereals Products Ltd. • United Breweries Ltd.
Plant capacity: 100MT/DayPlant & machinery: Rs 408 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 1672 Lakhs
Return: 26.00%Break even: 43.00%
Add to Inquiry Add to Inquiry Basket

BLOOD BAGS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Blood bag is a disposable bio-medical device used for collection, storage, transportation and transfusion of human blood and blood components. The system consists of a single or multiple bag connected with tubings, needle, needle cover, clamp etc. The Blood Bags are made of plastic-material, which are compatible with blood. The introduction of flexible PVC bags for the storage of blood and its components totally replaced the use of glass bottles because of its numerous advantages. Blood bags enable better separation of blood components in a more sterile manner and safer transfusion of components. This has led to increasingly wider use of blood component therapy than whole blood use, thus enabling more effective use of the scarce donor blood that is available. Blood Bags can successfully replace the use of glass bottles for collection storage, transportation and transfusion of blood and blood components since bottles require exhaustive cleaning, rinsing and autoclaving procedures and there are chances of breakage at any stage. Further, use of disposable bags eliminates the possibility of any contamination. Blood bags contain an anticoagulant solution and a red blood cell preservative solution, and are used in blood banks which both collect donor blood and separate blood components. Blood bags are made from imported, medical grade PVC granules & sheets in Class 10000 Clean room environments. Increase in the healthcare facilities will further act as a driver for the growth of medical devices sector in India. The blood bag market is expected to grow further in the coming years owing to continuous developments and rising demand for better blood collection technology. As a whole it is a good project for new entrepreneurs to invest.
Plant capacity: 30000 Nos./DayPlant & machinery: Rs 426 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1465 Lakhs
Return: 27.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Heptafluoropropane - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

1,1,1,2,3,3,3-Heptafluoropropane, also called heptafluoropropane, HFC-227 or HFC-227ea (ISO name), is a colourless, odourless gaseous halocarbon commonly helped as a gaseous fire suppression agent. Its chemical formula is CF3-CHF-CF3, or C3HF7. With a boiling point of -16.4°C, it is a gas at room temperature. It is slightly soluble in water (260 mg/L). HFC-227ea is almost not transformed in the body. During exposure blood concentrations rise rapidly to a maximum, but is also rapidly cleared from the blood via respiration after cessation of exposure. HFC-227ea has no toxicity after single and after repeated exposure for prolonged periods. The gas is not an irritant to the respiratory tract and does not cause genetic effects. The data on HFC-227ea do not indicate that the gas causes cancer. Uses HFC-227ea finds use in fire suppression systems in data processing and telecommunication facilities, and in protection of many flammable liquids and gases. HFC-227ea falls in the category of Clean Agents and is governed by NFPA 2001 - Standard for Clean Agent Fire Extinguishing Systems. Effective fire suppression requires introducing a concentration of the HFC-227ea agent between 6.25% and 9% depending on the hazard being protected. Its NOAEL level for cardiac sensitization is 9%. The United States Environmental Protection Agency allows concentration of 9% volume in occupied spaces without mandated egress time, or up to 10.5% for a herped time. Most fire suppression systems are designed to provide concentration of 6.25-9%. Further the heptafluoropropane is indicated to be useful at lower vapor pressures, to have better pressure-seal properties, elastomer compatibility and solvent power, and to provide higher formulation stability while being non-flammable. Any entrepreneur venture into this field will be successful.
Plant capacity: 2 MT/DayPlant & machinery: Rs 116 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1108 Lakhs
Return: 26.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 11 of 37 | Total 366 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 36 37   Next »


Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.

NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.

^ Top

Products & Services


Contact Us

My Account


Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search

Search Project Report & Profiles