Best Business Opportunities in Orissa- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Minerals: Project Opportunities in Orissa



Indian mineral resources are sufficiently rich and varied to provide the country with a strong industrial base. India is gifted with important mineral resources. The country produces about 89 minerals out of which 52 are non-metallic, 4 are fuel minerals, 11 are metallic, and 22 are minor minerals. The Mining industry in India is a major economic activity which contributes significantly to the economy of India. The GDP contribution of the mining industry varies from 2.2% to 2/5% only but going by the GDP of the total industrial sector it contributes around 10% to 11%. Even mining done on small scale contributes 6% to the entire cost of mineral production. Indian Mining Industry provides job opportunities to around 700,000 individuals.


With its vast resources of minerals Orissa offers excellent opportunities for mineral and mineral-based industries. The State has vast and diverse mineral deposits amounting to almost 16.92% of the total reserves of the country. Orissa offers investment opportunities for the following mineral-based industries: - sponge iron unit, induction furnace, coal washery, aluminium fluoride, powder metallurgy, aluminium downstream. The rich reserves of minerals in Orissa have led to the establishment of several mineral based industries in the State. Orissa is endowed with rich mineral resources like iron-ore, bauxite, coal, manganese-ore, chromite etc. According to All India Mineral Resources Estimates the mineral deposits of Orissa in respect of chromite, nickel, cobalt, bauxite, iron-ore are about 98.4%, 95.1%, 77.5%, 52.7% and 33.4% respectively of the total deposits of India. Other important mineral resources of the state are limestone, china clay, quartz, precious and semi-precious stones, copper, vanadium etc. The main exported minerals of the state are chromite, coal, dolomite, iron-ore, manganese and bauxite.


The salient features of the National Mineral Policy, 2008 (NMP) generally applicable to the States are as follows:-

·         Minerals being a valuable resource, extraction have to be optimised through scientific methods, beneficiation and economic utilization. Zero waste mining will be the goal.

·         The regulatory environment will be made more conducive to investment. Transparency in allocations of concession will be assured with security of tenure to a concessionaire.

·         The duration of all concessions shall be rationalised.

·         Data filing requirements will be rigorously monitored and concessionaires will be closely monitored in this regard.

·         A framework of sustainable development will be designed to ensure that mining can take place along with restoration.

·         Mining shall not be undertaken in ecologically fragile or biologically rich areas. Mining in forest areas will be accompanied by time-bound reclamation.

·         Mining sectoral value addition through beneficiation, calibration, blending, sizing, concentration, pelletisation, purification and customization will be encouraged.

·         Mining infrastructure requires a special thrust. Infrastructure needs will be financed through innovative structures including user charges, PPP mode and viability gap funding.

·         An enabling environment will be created to motivate large capacity mining companies to undertake creation of transportation network.

·         In the public funding of infrastructure, greater thrust will be given to development of health, education, drinking water, road and other related facilities for integrated regional development.

·         State agencies involved in mineral sector development and regulation will be encouraged to modernize in the areas of prospecting as well as regulation.

·         The State Directorates will be suitably strengthened to enable them to regulate mining in the interests of conservation and scientific development of the sector.


Agro & Food Processing: Project Opportunities in Orissa



India is the world's second largest producer of food next to China, and has the potential of being the biggest with the food and agricultural sector. The Indian food processing industry stands at $135 billion and is estimated to grow with a CAGR of 10 per cent to reach $200 billion by 2015. The food processing industry in India is witnessing rapid growth. In addition to the demand side, there are changes happening on the supply side with the growth in organised retail, increasing FDI in food processing and introduction of new products. India's food processing sector covers fruit and vegetables; meat and poultry; milk and milk products, alcoholic beverages, fisheries, plantation, grain processing and other consumer product groups like confectionery, chocolates and cocoa products, Soya-based products, mineral water, high protein foods etc.



The State has vast potential for agro and food processing industries. This sector has therefore been identified as a prominent thrust area. Agriculture occupies a vital place in Orissa's economy with nearly 65 per cent of the total work force directly or indirectly engaged it. The State attaches top most priority to the growth of agro based and food processing industries. The Government has framed an agricultural policy with the aim of increasing investment in agriculture; bringing about a shift from subsistence to commercial agriculture and thus providing a status of industry to agriculture. There are several investment opportunities in the sector, which include :- provision of infrastructure like cold storage, storage godown, lift irrigation, marketing, etc ; (ii) setting up of agro-based industries for value addition to agricultural produce; (iii) seed production and quality planting material; (iv) agro-service centres; (v) production of organic tea, coffee, ginger, turmeric, cashew, aromatic rice; (vi) export of horticultural produces; (vii) fisheries and fish processing; etc. Priority has been accorded to agriculture extension through application of high-end crop production technologies as well as adoption of integrated nutrient management and pest management practices.



The promotion of Agro-based industries is among the priorities of the State Government. Government would consider privatization of Government agricultural farms to act as nuclei for production of high quality seeds for hi-tech, agriculture and dissemination of advanced technology to farmers. Private efforts for development of agriculture, horticulture, plantation crops etc. will generally through contract farming. However, provisions of the Land Reforms Act would be suitably amended to exclude private commercial plantations from the provisions of Land Reforms. Greenhouse horticulture/floriculture would be promoted in private sector. Hi-tech, agritech firms would be also supported in selected areas. Sericulture will get high priority and private sector would be permitted to be involved in this activity. Tissue-Culture and techniques of advanced bio-technology will be promoted in a big way. Special efforts would be made to extensively develop cotton and sugarcane. Separate agencies will be created in the Agriculture A comprehensive programme for development of inland fish culture through advanced techniques of high yielding fish production will be launched. Brackish water and fresh water prawn culture has vast potential in the State. While promoting this sector, care will be taken to regulate this activity to prevent encroachments/pollution/disease spread. Modern hatcheries and feed plants would be promoted and supported. To give the required support to agro and food processing industries, a new corporate body will be set up to promote this sector through equity participation, load and other financial support and escort services. A comprehensive programme for development of Poultry sector will also be launched. Efforts will be made for long term arrangements to meet the raw material requirements of existing forest-based industries. Measures to promote commercial plantations in areas like rubber, coffee and tea will also be adopted.



Automobile industry: Project Opportunities in Orissa



The automotive industry in India is one of the largest in the world and one of the fastest growing globally. India's passenger car and commercial vehicle manufacturing industry is the seventh largest in the world, with an annual production of more than 3.7 million units. Automobile Exports registered a growth of 22.30 percent during the current financial year. Automotive industry is the key driver of any growing economy. It plays a pivotal role in country's rapid economic and industrial development. It caters to the requirement of equipment for basic industries like steel, non-ferrous metals, fertilisers, refineries, petrochemicals, shipping, textiles, plastics, glass, rubber, capital equipments, logistics, paper, cement, sugar, etc. It facilitates the improvement in various infrastructure facilities like power, rail and road transport. Due to its deep forward and backward linkages with almost every segment of the economy, the industry has a strong and positive multiplier effect and thus propels progress of a nation. The automotive industry comprises of the automobile and the auto component sectors.



The State would make every endeavour to attract entrepreneurs specially established industrial houses to the State for setting up Automobile, Automobile components and Auto Ancillary industries of suitable locations. Orissa holds huge investment potential in the automobile sector including the auto component sector. This is because of the inherent advantages of the State in terms of raw material, cost and manpower. The resources available in the State to support automobile manufacturing units include:- Good quality pig iron/steel ingot and aluminium ingot; steel flat products like plates and sheets; steel rounds; several state-of-the-art automobile tyre manufacturing units; adequate supply of power in the State for the power intensive industrial activities; several institutions which are a constant source of educated and skilled human resource; etc. Investment Opportunities in the sector exist in passenger car segment, two wheeler segment and heavy truck segment. The Government is making all efforts to attract investors into the State, through various incentives and schemes.



The Orissa state government is considering implementing a dedicated policy to encourage and boost investment in the sector of automotive components manufacturing. The state sees huge potential in the sector owing to the surge of investment and growth in the automobile industry and expects to cash in on it through the policy. According to a state official, the state plans to come up with a policy that will incentivize investment from auto parts manufacturing companies with the aim of creating an auto parts manufacturing hub in the state. In order to do so, the incentives offered in other states will be studied and the draft of the policy will be prepared accordingly after consultations with various prospective investors and stakeholders.

Biotechnology Industry: Project Opportunities in Orissa



The Biotechnology sector in India is one of the fastest growing sectors of the Indian Economy. As the sector is mainly based on knowledge, it is expected that it will play an important part in shaping the Indian Economy, which is developing at a rapid pace. The Indian Biotechnology sector holds immense potential in terms of research and development, skill and cost effectiveness.



Given the rich bio-resources base, the State offers several opportunities for investment in the sector. This is particularly so, in the areas of tissue culture, herbal products, biofertilizers and biopesticides, as well as aqua-culture. The Government of Orissa has been encouraging investors through provision of infrastructural facilities and other necessary support. The State is advantageously positioned to harness biotechnology applications owing to its rich mineral and bio-resources.  The Chilika lake, Asia’s largest brackish water lake, houses a unique ecosystem comprising aquatic and terrestrial vegetation, migratory and resident birds, fishery resources and terrestrial wild life. It has a long coastline covering 480 km.  The State has a rich floristic wealth with an estimated 2754 plant species. Out of the estimated 1200 orchid species in India, 129 rare species are reported to occur exclusively in Orissa. Forests cover about 30% of the geographical area of the State.


Recognizing the potential, the Government of Orissa has identified biotechnology as a priority area. The biotech policy aims at integrating the existing achievements in research and industry and strengthening and expanding the existing base to maximize the benefits for development of the state through the following:

1. Prioritising the thrust areas for basic and applied research and technology development

2. Promoting innovation in R&D by providing financial and infrastructural support and by encouraging public-private partnership for R&D.

3. Promoting development of the industry by providing quality infrastructure and an enabling environment for sustained growth and international competitiveness.

4. Development of human resources in various areas of biotechnology.

5. Employment generation

6. Capacity building of IPR and biosafety.

7. Providing financial support, and incentives to industry.



Handicrafts and Handlooms: Project Opportunities in Orissa


Indian handloom has been the pride of India’s tradition and a representative of its cultural brilliance. In fact, handloom sector has been gaining significance since the ancient times, when it was discovered. The basic meaning of Indian handloom is creating designs by keeping traditions intact. And that’s the reason; this sector has always been in demand. In earlier times, the weavers, embroiders and printers used to do wonders with their skills manually. But, the development in this sector has given birth to various machines that are meant to simplify the tasks. India has a rich history of handicrafts that has evolved over the centuries. The entire wealth of timeless Indian handicrafts has survived through ages. The legacy of Indian culture promises everything- beauty, dignity, form and style. The magnetic appeal of Indian culture resides in its exclusivity, its mystical tone that leaves people amazed at their sight.


Handlooms and Handicrafts of Orissa are known the world over. The industry is being assisted by the Government in various ways. It is being provided raw material, marketing and quality up gradation facilities as well as the required financial support. The sector is a source of large scale employment in the State, particularly in the rural areas. All efforts would be made to provide assistance for marketing, quality upgradation, etc. Strong incentives and support would be provided to Khadi and Village Industries sector to provide large scale employment in rural areas. As with many other handicrafts of Orissa, the roots of the applique art/craft form is interwined with the rituals and traditions of Lord Jagannath, the presiding deity of the Puri temple. Horn articles of Orissa are mystical and are blended with a superb fashion design. Their lively appearance, dynamism and animation vie with the real objects of nature - that spells the names of Parlakhemundi and Cuttack. Available in widest spectrum of items like combs, pen stands, cigar pipes, decorative figures - horn articles form a memorable memento for the near and dear ones at home. The traditional crafts like wood and stone carvings, tie and dye weaving textiles, folk and patta paintings, applique, filigree and jewellery work had flourished side by side with royal patronage and ritualistic needs of the temples in the state.



For handlooms and handicrafts, the two key organisations under the ministry of textiles are the Office of the Development Commissioner for Handlooms and the Office of the Development Commissioner for Handicrafts. Over the years, AIACA has engaged with the two offices in various capacities over issues such as access to raw material, access to markets and access to credit. More recently, AIACA has been engaging on the issue of protection, preservation and promotion of handloom and handicraft goods through the Geographical Indications status. Due to effective Government intervention through financial assistance and implementation of various developmental and welfare schemes, this sector has been able to withstand the competition from the power loom and mill sectors.




Tourism: Project Opportunities in Orissa



Tourism in India is the largest service industry, with a contribution of 6.23% to the national GDP and 8.78% of the total employment in India. Tourism has become an important industry in many countries of the world, both in the east and the west. Various initiatives are being taken by the Government and other organizations to promote tourism here. Tourism is one of the fastest growing industries in the world. The number of tourists worldwide has been registering phenomenal growth and it is expected that this number would shortly touch 1.5 billion. Tourism contributes about 11% of the world work force and 10.2% of the global gross domestic products. The dynamic growth of this industry is evident from the fact that a new job is added to this sector every 2.5 second.


Orissa offers excellent opportunities in the tourism sector. The Government has recognised the importance of tourism promotion in economic growth and has accordingly, undertaken several measures. These include:-A new logo to re-position and rebrand Orissa as a vibrant tourist destination Tourism fairs and festivals such as 'Sreekhetra Utsav' at Puri, 'Ekamra Utsav' at Bhubaneswar, 'Konark Festival' at Konark, showcasing tourism and cultural potential of the State Participation in travel-trade shows like 'Buddhist festival' , 'Leisure Moscow', 'WTM', 'PATA convention', 'IATO' , 'TTF', etc. The State has several places for tourists attraction, in the form of ancient monuments; beaches; religious places; hot springs; forest and wildlife; etc. The beaches include Gopalpur, Puri, Chandipur, Chandrabhaga, Aryapalli, Astaranga, Balaramgadi, Balighai, Baliharachandi, Beleswar, Paradeep, etc. Atri, Deulajhari, Taptapani and Tarabalo are the hot springs. Major waterfalls in the State are Barehipani, Joranda, Badaghagra, Sanaghagra, Khandadhar, Duduma, Harishankar, Miriglotah, Nrusimhanath, Phurli Jharan and Pradhanpat. Orissa was the first State to declare Hotels as an Industry. In addition to Hotels, other tourism related activities and wayside amenities would be entitled to various incentives as industries under the Industrial Policy. A separate policy on tourism would be formulated and announced shortly.


A tourism policy has also been formulated by the Government for encouraging private investors. Investment opportunities in the sector, existing across a wide spectrum of areas, include:-

·         Accommodation facilities in the form of hotels, motels, spas and resorts, camps and jungle lodges;

·         Transportation services in the form of air, road and rail network, tourist vehicles and taxicabs;

·         Entertainment and leisure centres in the form of amusement Parks, theme Parks, multiplexes; water sports complexes; golf courses, bowling alleys and other sports related facilities;


Waste management: Project Opportunities in Orissa


Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.



The most common way of treating solid waste in Orissa is land filling. Awareness on Solid Waste management among the people and various Institutions, Government Organisations and non-government Organisations are working on it. In Puri Municipality there exists a mechanized Bio-compost plant for treatment of garbage of 100 TPD capacities. Solid waste from industrial activities is one of the major environmental concerns. About 25 million tons of solid waste is being generated from industrial sectors in the state. It includes fly ash & bottom ash from thermal power plants, chemical slags from Iron 7 Steel plants and red mud from Aluminium industries. Some of the wastes are designated as hazardous because of their composition and hazard potential. About 80000 MT/annum of hazardous waste is being generated in Orissa. In the mining sectors, the major solid waste is the overburden waste.


National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 31 of 35 | Total 349 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 31 34 35   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Flavoured Nuts - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

The cashew nut is served as a snack or used in recipes, like other nuts, although it is actually a seed. The cashew apple is a fruit, whose pulp can be processed into a sweet, astringent fruit drink or distilled into liquor. The shell of the cashew nut yields derivatives that can be used in many applications from lubricants to paints, and other parts of the tree have traditionally been used for snake-bites and other folk remedies. Originally native to northeastern Brazil, the tree is now widely grown in tropical regions, India and Nigeria being major producers, in addition to Vietnam, the Ivory Coast, and Indonesia. Cashew nuts are commonly used in Indian cuisine, whole for garnishing sweets or curries, or ground into a paste that forms a base of sauces for curries (e.g., korma), or some sweets (e.g., kaju barfi). It is also used in powdered form in the preparation of several Indian sweets and desserts. In Goan cuisine, both roasted and raw kernels are used whole for making curries and sweets. Features of Flavoured Cashew Nuts : Longer shelf life ; Good for health ; Delicious taste Few Indian Major Players are as under • Goa Agricommerz Ltd. • Goa Forest Development Corpn. Ltd. • Kerala State Cashew Devp. Corpn. Ltd. • Kisan Cold Storage & Refrigeration Service Ltd. • M A C Agro Inds. Ltd. • M P S Food Products Ltd. • Mac Industries Ltd. • Mangalya Trading & Investments Ltd. • Moolchand Exports Ltd. • Olam Enterprises India Pvt. Ltd. • Olam Exports (India) Ltd. • Orissa State Cashew Devp. Corpn. Ltd. • P J S Overseas Ltd. • Padmavathi Cashews & Coffee Ltd. • Pioneer Cashew Inds. Ltd. • State Farming Corpn. Of Kerala Ltd. • Tamilnadu Forest Plantation Corpn. Ltd. • Tropical Foods Ltd. • West Bengal Forest Devp. Corpn. Ltd.
Plant capacity: Flavoured Cashew Nut:500 kgs/Day •Flavoured Peanut:500 kgs/DayPlant & machinery: Rs 117 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 215 Lakhs
Return: 29.46%Break even: 57.66%
Add to Inquiry Add to Inquiry Basket

Ductile Iron Pipe Fittings for Water & Sewage with Lost Foam Casting Process - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Cost of Project

Casting other than a pipe, which allows pipeline deviation, change of direction or bore. In addition flanged-sockets, flanged-spigots and collars are also classified as fittings. Iron or steel pipes and tubes are used in a variety of industries. Different types of pipe fittings are used to connect different types of pipe. The type of fitting used will depend on the type of service the pipe being connected must perform. Pipe fittings basically include the range of components that are used to connect pipe ends for in-line, multi-port, offset and mounting configurations. Pipe fitting cross sections are mostly, but not always, circular in shape to match with the pipe section with which they are connected. Pipes can be metallic or plastic and pipe fittings vary depending on the type of pipe used. Pipe fittings are used for various purposes. They can be used to extend or terminate pipe runs, change a pipe's direction, to connect two or more pipes and to change the pipe size.Types of D.I. Pipe : Pipe Adopter , Pipe Elbow, Pipe Coupling, Pipe Union, Pipe Reducer, Pipe Tee . Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Ashutosh Castings Ltd. • Birla Accucast Ltd. • Carnation Industries Ltd. • Chetan Foundries Ltd. • Dee Dee Steel Castings Ltd. • Electrosteel Castings Ltd. • Electrosteel Steels Ltd. • Electrotherm (India) Ltd. • Govind Steel Co. Ltd. • Hindusthan Malleable & Forgings Ltd. • I C L Foundries Ltd. • Indu Engineering & Textiles Ltd. • J K M Ferrotech Ltd. • Jai Balaji Steels (Purulia) Ltd. • Jindal Saw Ltd. • Nelcast Ltd. • Porwal Auto Components Ltd. • Sathavahana Ispat Ltd. • United Foundries Pvt. Ltd. • Yashwant Iron & Steel Works Ltd.
Plant capacity: Pipe Adopter:2 MT/Day •Pipe Elbow :2 MT/Day •Pipe Flange :2 MT/Day •Pipe Union : 2 MT/Day •Pipe Reducer : 2 MT/Day •Pipe Tee:2 MT/DayPlant & machinery: Rs 254 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 946 Lakhs
Return: 26.67%Break even: 60.85%
Add to Inquiry Add to Inquiry Basket

Plastic Optical Lenses - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Optical Lenses are optical components designed to focus or diverge light. Optical Lenses, which may consist of a single or multiple elements, are used in a wide variety of applications from microscopy to laser processing. Many industries utilize Optical Lenses, including life sciences, imaging, industrial, or defense. As light passes through a lens, it is affected by the lens’ profile or substrate. A Plano-Convex (PCX) or Double-Convex (DCX) lens causes light to focus to a point, while a Plano-Concave (PCV) or Double-Concave (DCV) lens causes the light traveling through the lens to diverge. Achromatic Lenses are ideal for applications requiring color correction, while Aspheric Lenses are designed to correct spherical aberration. Germanium (Ge), Silicon (Si), or Zinc Selenide (ZnSe) lenses are ideal for transmitting the Infrared (IR) spectrum, while Fused Silica is well suited for the Ultraviolet (UV). A lens is a transmissive optical device that affects the focus of a light beam through refraction. A simple lens consists of a single piece of material, while a compound lens consists of several simple lenses (elements), usually along a common axis. Lenses are made from transparent materials such as glass, ground and polished to a desired shape. A lens can focus light to form an image, unlike a prism, which refracts light without focusing. Devices that similarly refract radiation other than visible light are also called lenses, such as microwave lenses or acoustic lenses. Most lenses are spherical lenses: their two surfaces are parts of the surfaces of spheres. Each surface can be convex (bulging outwards from the lens), concave (depressed into the lens), or planar (flat). The line joining the centres of the spheres making up the lens surfaces is called the axis of the lens. Typically the lens axis passes through the physical centre of the lens, because of the way they are manufactured. Lenses may be cut or ground after manufacturing to give them a different shape or size. The lens axis may then not pass through the physical centre of the lens. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Bausch & Lomb Eyecare (India) Pvt. Ltd. • G K B Ophthalmics Ltd. • G K B Vision Ltd. • Indo-American Optics Ltd. • Prime Ophthalmic Products Pvt. Ltd. • Techtran Ophthalmics Pvt. Ltd. • Techtran Polylenses Ltd.
Plant capacity: 60,000 Pairs/DayPlant & machinery: Rs 1026 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 2211 Lakhs
Return: 26.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Coir Geotextiles - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Coir as a natural organic product is organically biodegradable. The Fiber is hard and strong and decomposes slowly, making it perfectly suited for use in Geotextiles. Coir Geotextiles provide good support on slopes for about five years and there is no need for post-installation work. Coir Geotextiles is developed by the Coir Board of India. The world has today accepted Coir Geotextiles and acknowledges its effectiveness. Coir Geotextiles, used in many kinds of applications like Slope Stabilisation, Controlling Soil Erosion, Road and Rail Embarkments, River Embarkments, Landscape Areas etc., Coir geotextiles with its Indianised connotation "Coir Bhoovastra", a generic member of the geosynthetic family, are made from the coconut fibre extracted from the husk of the coconut fruit as explained in the following section. Like their polymeric counter parts, coir geotextiles can be synthesised for specific applications in geotechnical engineering practice. Coir geotextiles is not a consumer product, but a technology based product. A range of different mesh matting is available, meeting varying requirements. Coir fibres can be converted into fabric both by woven and non-woven process. Coir mesh matting of different mesh sizes is the most established coir geotextiles. Mesh matting having different specifications is available under quality code numbers H2Ml to H2MIO. These qualities represent coir geotextiles of different mesh sizes ranging from 3.175mm to 25.4mm. Several types of non-woven geotextiles also exist. Most of the non-woven mats are made from loose fibres, which are interlocked by needling or rubberising. Non-woven geotextiles are available in several dimensions and have a minimum thickness of 2mm. Coir geotextiles can be used to stabilize the soil temporarily when construction roads or banks. Coir geotextiles are being used as a separation cum drainage layer in the road. It is also intended to serve as a reinforcement material in the beginning of the project. Geo-synthetics are widely used in the construction of road all over the world, whereas use of coir geotextiles is very limited in such construction. Few Indian Major Players are as under • Amco Industries Ltd. • Amichand Textiles Ltd. • Aspinwall & Co. (Travancore) Ltd. • Delight Handicrafts Palace Ltd. • Dunlop Comforts Pvt. Ltd. • Duroflex Pvt. Ltd. • Eco Wood Ltd. • Karnataka Consumer Products Ltd. • Karnataka State Coir Devp. Corpn. Ltd. • Kerala State Coir Corpn. Ltd. • Kontak Comforts Pvt. Ltd. • Kozylon Coir Products Ltd. • Wires & Fabriks (S.A.) Ltd.
Plant capacity: 6.5 MT/DayPlant & machinery: Rs 654 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 1149 Lakhs
Return: 25.93%Break even: 50.48%
Add to Inquiry Add to Inquiry Basket

Hematite from Iron Ore/Lumps - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Hematite is one of the most abundant minerals on Earth's surface and in the shallow crust. It is an iron oxide with a chemical composition of Fe2O3. It is a common rock-forming mineral found in sedimentary, metamorphic, and igneous rocks at locations throughout the world. Hematite is the most important ore of iron. Although it was once mined at thousands of locations around the world, today almost all of the production comes from a few dozen large deposits where significant equipment investments allow companies to efficiently mine and process the ore. Most ore is now produced in China, Australia, Brazil, India, Russia, Ukraine, South Africa, Canada, Venezuela, and the United States. ? Hematite has a wide variety of other uses, but their economic significance is very small compared to the importance of iron ore. The mineral is used to produce pigments, preparations for heavy media separation, radiation shielding, ballast, and many other products. The most important iron ore types found in India are hematite and magnetite. Nearly 61% of hematite ore deposits are found in the eastern part of India and 82% of magnetite ore deposits occur in southern part of India, especially in the state of Karnataka. Iron ore Hematite contains 60 per cent to 70 per cent pure iron and is found in Andhra Pradesh, Jharkhand, Orissa, Chhattisgarh, Goa, Karnataka, Maharashtra and Rajasthan. Therefore, it is a good project for entrepreneurs to invest Few Indian Major Players are as under • Adhunik Alloys & Power Ltd. • Atibir Industries Co. Ltd. • Bajrang Metalics Ltd. • Banspani Iron Ltd. • Canara Overseas Ltd. • Chaman Metallics Ltd. • Comfoams Ltd. • Concast Steel & Power Ltd. • Khedaria Ispat Ltd. • Kundil Sponge Iron Ltd. • M B Ispat Corpn. Ltd. • M G M Minerals Ltd. • M S P L Ltd. • M S P Metallics Ltd. • Shree Sidhbali Ispat Ltd. • Shri Hare-Krishna Sponge Iron Ltd. • Steel Exchange India Ltd. • Suraj Products Ltd. • Tata Sponge Iron Ltd. • V S L Steels Ltd. • Vikas Metaliks & Energy Ltd. • Yazdani Steel & Power Ltd.
Plant capacity: Hematite:120 MT/DayPlant & machinery: Rs 416 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 1081 Lakhs
Return: 28.11%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Quartz Slabs - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Engineered stone is a composite material made of crushed stone bound together by an adhesive, (most commonly polymer resin, with some newer versions using cement mix). The two common stones used in producing these products are marbles and quartz. The application of these products depends on the original stone used. For engineered marbles the most common application is indoor flooring and walls, while the quartz based product is used primarily for kitchen countertops. Quartz is the most abundant mineral on Earth and one of the hardest, so it is "hardly" surprising that manufacturers saw its great potential for a surface material more than 50 years ago. Since that time, quartz countertops have grown in popularity as homeowners discovered what the earliest quartz pioneers knew - when the natural mineral quartz is improved upon by man's ingenuity, quartz countertops can compete with other natural stone countertops in every way. Engineered quartz (not to be confused with Quartzite, another appealing natural stone used as counters) is a manmade product created mostly from natural materials. It’s made of 90 to 94 percent ground quartz and 6 to 10 percent resins and pigments that are combined into durable and nonporous slabs. The strength of quartz, even in a manufactured form, makes it naturally resistant to abrasion, scratches, dents, and even acids without the need for sealants. And the environmental impact of manufactured quartz is low: Quartz is an abundant material and the finished product is nontoxic and nonallergenic, and will last a lifetime, reducing the need for replacement. Quartz countertops quickly became popular in Italy, and have been featured in European kitchens for decades to follow. It took longer for the trend to catch on in the United States - this may be explained in various ways: trends and fashions that originate abroad often take time to trickle to the U.S., or, more likely, American homeowners were satisfied with our current options at the time (laminate was the predominant surface in the 60s and 70s) and were not inclined to embrace a material that looked so similar to widely available natural stone options like granite, marble and limestone. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Aakash Universal Ltd. • Associated Marmo & Granites Ltd. • Elegant Marbles & Grani Inds. Ltd. • Inani Marbles & Inds. Ltd. • Madhav Marbles & Granites Ltd. • Mahak Marbles Pvt. Ltd. • Mira Textiles & Inds. (India) Ltd. • N C L Marbles & Granites Ltd. • Neelmani Mines & Marbles Ltd. • Pokarna Engineered Stone Ltd. • Polar Marmo Agglomerates Ltd. • Priceless Overseas Ltd. • Rose Marbles Pvt. Ltd. • S V I L Mines Ltd. • Shreeji Industries Ltd. • Shrenik Marbles Ltd. • Sukher Marbles Ltd. • Tamil Nadu Minerals Ltd. • Vineet Udyog Ltd.
Plant capacity: Quartz Slabs (760 x 2440 x 15 mm):60 Nos/DayPlant & machinery: Rs 101 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 350 Lakhs
Return: 26.58%Break even: 51.79%
Add to Inquiry Add to Inquiry Basket

Aluminium Fluoride - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Aluminium fluoride is the chemical compound with the formula AlF3. It has the consistency of a white powder. AlF3 is refractory, in strong contrast to the other halides of aluminium. Adding aluminium fluoride to the production process of primary aluminium lowers the consumption of electricity required in the smelting process and thereby considerably contributes to the reduction of production costs of aluminium. Energy is a major cost factor in aluminium production. Aluminium fluoride is not substitutable by other products in this respect. Aluminium producers (smelters) are the main users of aluminium fluoride. For many years now the production of aluminium has been growing. Every year more than 20 million tons of aluminium is produced world-wide, some 30% of which in Europe. Depending on the type and efficiency of the production process, around 20 kg of aluminium fluoride are used in producing one ton of aluminium. There are two main ways to produce aluminium fluoride. One production process is called the "dry process" in which aluminium fluoride is produced from fluorspar (CaF2) and results in a quality referred to as "high density" aluminium fluoride. High density quality consists of 90-92% of aluminium fluoride. The other main production process is called the "wet process" in which aluminium fluoride is produced from a by-product of fertilizer plants and results in a quality called "low density" aluminium fluoride. Low density quality consists of 97% of aluminium fluoride. All the producers that are addressees of this Decision produce and sell high density aluminium fluoride. Aluminium fluoride is used in many industrial processes. It is one of the minor constituents added to the electrolytic cells during the production of metallic aluminium. Aluminium fluoride is used in turning alumina into aluminium. It lowers the melting point of alumina and boosts its electrical conductivity. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Alufluoride Ltd. • Mafatlal Fine Spg. & Mfg. Co. Ltd. • Navin Fluorine Intl. Ltd. • Southern Petrochemical Inds. Corpn. Ltd. • Tanfac Industries Ltd.
Plant capacity: Aluminium Fluoride : 16.7 MT/Day •Silica as by product: 5.67 MT/Day Plant & machinery: Rs 408 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 1069 Lakhs
Return: 26.69%Break even: 56.04%
Add to Inquiry Add to Inquiry Basket

Toothbrush - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

A toothbrush is a dental instrument used for cleaning teeth, ideally in conjunction with toothpaste or mouthwash. The toothbrush consists of a plastic handle and nylon bristles attached to the head of the brush. Toothbrush occupies a prominent and very important place among the dentifice available today. Toothbrushes are getting more complex and sophisticated every year. New geometries, material combinations and additional functions are the only way to set off from the competition. Today’s consumer expects a dental care system which offers a multitude of preventive dental care measures such as interdental space cleaning, plaque and tartar removal. Due to the increasing awareness and importance of dental hygiene, the use of tooth paste was confined to the upper and upper middle classes of urban society, but with increasing awareness the use of Toothbrush has become well established in even rural house hold. Toothbrush being consumer product and its market being quite competitive and also acceptable. For keeping good health, care of teeth is one of the essential step. The particle of food that sticks to our teeth give birth to fouling smell and many dreadful diseases, which destroy the gums and results in tooth decay. A man, who do not have teeth in his mouth, only know as how important are these. A man having fouling smell coming out from his mouth cannot even get the close company of his companion, and if someone has got a dental diseases, one can blame only one's carelessness in the past. Fortunately people have become conscious of Toothbrushing. Any entrepreneur venture into this field will be successful Few Indian Major Players are as under • Ajay Home Products Ltd. • Anchor Health & Beauty Care Pvt. Ltd. • Andhra Pradesh State Civil Supplies Corpn. Ltd. • Aryan Brush & Estate Developers Ltd. • Camelot Investments Co. Pvt. Ltd. • Colgate-Palmolive (India) Ltd. • Contemporary Targett Ltd. • Dr. Fresh Assets Ltd. (1990) • Gillette India Ltd. • Sinhal Metal Inds. Ltd. • Trim Plastics Ltd. • W H Targett India Ltd. • Warren Pharmaceuticals Ltd.
Plant capacity: 15,000 Nos/DayPlant & machinery: Rs 178 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 316 Lakhs
Return: 26.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Caramel Food Colorant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Caramel colors are amorphous, brown to brownish materials resulting from the carefully controlled heat treatment of food grade carbohydrates in the presence of small amounts of food grade acids, alkalis or salts. Caramel or black jack is a dark brown colour prepared by heating sugar until it is decomposed and then adding boiling water to form a thick syrup. Caramel will impart a distinctive flavour of burnt sugar. Caramel is a well-known simple, brown means flavor and staple commercial material. It is an amorphous, dark-brown material that has been produced by the carefully controlled heat treatment of saccharine materials such as dextrose, invert sugar, lactose, malt syrup, molasses, sucrose, starch hydrolysates and fractions thereof, etc. The heavy-bodied, almost black syrup contains color, components that impart the amber shade found in carbonated beverages, pharmaceutical and flavoring extracts, candies, soups, bakery products, and numerous other foods. Caramelization, the act of breaking up the natural sugar molecules in food to create a different flavor compound, makes everything taste better. Caramelization is one of the most important types of browning processes in foods. It is the interaction between sugar and sugar. Fructose and glucose are reducing sugars so they give their electrons to other molecules developing compounds which give caramel colors and flavors, viz; Diacetyl gives a buttery flavor, Furan gives a nutty flavor, Acetaldehyde gives a rum or cherry components flavor. Few Indian Major Players are as under • Aarkay Food Products Ltd. • Dynemic Products Ltd. • International Flavours & Fragrances (India) Ltd. • Kancor Ingredients Ltd. • Neelikon Food Dyes & Chemicals Ltd. • Universal Starch-Chem Allied Ltd. • Vidhi Dyestuffs Mfg. Ltd.
Plant capacity: Caramel Food Colour:50 MT/DayPlant & machinery: Rs 405 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 1223 Lakhs
Return: 25.82%Break even: 56.62%
Add to Inquiry Add to Inquiry Basket

Beer Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Beer is the world's oldest beverage, possibly dating back to the 6th millennium BC. It is also the most widely consumed alcoholic beverage and the third most popular drink overall after water and tea. Produced by the brewing and fermentation of starches, mainly derived from cereals — the most common of which being barley. Beer forms part of the culture of many nations, and has acquired various social traditions and associations. Beer is consumed in countries all over the world. Sales of beer are four times that of wine and in most societies, beer is the most popular alcoholic beverage. Today, the brewing industry is a global business, consisting of several dominant multinational companies and many thousands of smaller producers ranging from brewpubs to regional breweries. Among the alcoholic drinks, Beer is quite common and popular in almost every Country of the World. People of different Countries take beer in varying much like a soft drink in European Countries it is just a substitute of water. The alcoholic contents and main source stuff also keep varying according to the tests of the major part of population of the particular country although it is a fashion to ask for beer of every origin in every Country. Formulations of beer manufacturing are done with the view of availability of the raw materials in that particular part of the World where the brewery is proposed to be established. In most of the parts of the world, barley is a universal source of beer extraction. But, beers are manufactured from Chamomile flowers and powdered gingers etc. as well. Separate formulations have been adopted for every major ingredient used in brewing & distillation of beer. Few Indian Major Players are as under • Appollo Distilleries & Breweries Pvt. Ltd. • Arlem Breweries Ltd. • Arthos Breweries Ltd. • Associated Breweries & Distilleries Ltd. • Aurangabad Breweries Ltd. • Blossom Industries Ltd. • Buckingham Distilleries & Breweries Ltd. • East Coast Breweries & Distilleries Ltd. • Foster'S India Ltd. • Hindustan Breweries & Bottling Ltd. • Kalyani Breweries Ltd. • Kool Breweries Ltd. • Lilasons Breweries Ltd. • Lilasons Industries Ltd. • Malabar Breweries Ltd. • Molson Coors India Pvt. Ltd. • Mysore Breweries Ltd. • Sabmiller India Ltd. • United Breweries Ltd. • Winsome Breweries Ltd.
Plant capacity: Beer (650 ml size Bottle):10,000 Litres/DayPlant & machinery: Rs 306 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 1055 Lakhs
Return: 27.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 31 of 35 | Total 349 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 31 34 35   Next »


Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.

NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.

^ Top

Products & Services


Contact Us

My Account


Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search

Search Project Report & Profiles