Best Business Opportunities in Mizoram- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Mizoram is a state of India. It is located in the northeastern part of the country and is bounded by Myanmar (Burma) to the east and south and Bangladesh to the west and by the states of Tripura to the northwest, Assam to the north, and Manipur to the northeast. The capital is Aizawl, in the north-central part of the state. Agriculture is the dominant economic activity of Mizoram, engaging more than two-thirds of the workforce. Two types of agriculture are practiced: terrace cultivation, in which crops are planted on relatively permanent, graduated terraces on the sides of hills and mountains to conserve water and reduce soil loss; and shifting agriculture, in which tracts called jhum are cleared by burning, cultivated for a limited period of time. Mizoram has a population of 1,091,014 with 552,339 males and 538,675 females. This reflects a 22.8% growth since 2001 census; still, Mizoram is second least populated state of India. The sex ratio of the state is 976 females per thousand males, higher than the national ratio 940. The density of population is 52 persons per square kilometer. Mizoram gross state domestic product (GSDP) in 2011-2012 was about 6991 crore (US$1.1 billion). The state's gross state domestic product (GSDP) growth rate was nearly 10% annually over 2001-2013 period. With international borders with Bangladesh and Myanmar, it is an important port state for Southeast Asian imports to India, as well as exports from India.

TOURISM

Mizoram, the Land of the Highlanders, is sandwiched between Myanmar, Bangladesh and the states of Tripura, Assam and Manipur. The rivers, peaks, plains and the lakes are the treasures of Mizoram. It is full of high ranges running from north to south covered by greenery throughout the year. The Mizoram State Government begins to recognize tourism as an important sector of the economy which needs to be developed for greater income generation. More emphasis on sustainable eco-tourism, adventure tourism, village tourism and rural tourism would bring in high - value tourism. With the increase of tourist the need for budget hotels has been acutely felt.

Tourism has emerged as an important economic activity and one of the fastest growing industries in the world. Globally, Tourism is the fastest growing industry and in terms of value, it comes third only after petroleum and Transport Industry.

As such, Tourism Department in Mizoram is also one of the fastest growing Departments in Mizoram. The Department has achieved these objectives by constructing Tourist Lodge, Tourist Resort and other Tourist amenities in difference places of Mizoram through liberal financing of Ministry of Tourism, Government of India.


INDUSTRIAL POLICY

The Industrial Policy of Mizoram State was first notified on 15.3.1989 to give direction to the strategy for Industrial development of the State. It laid stress on reducing shifting cultivation by encouraging a shift from primary to secondary sectors while protecting the Socio-Cultural and ethnic identity of the indigenous enterprise of Mizoram.

In view of the National Industrial Policy which laid special emphasis for the development of Industries in the North Eastern Region, the Govt. of Mizoram had notified new Industrial Policy 2000 for accelerated Industrial and Economic development of the State. The Government had adopted the approach for identification of thrust areas and promoting them with fiscal and other incentives packages. Broad policy of Foreign Direct Investment (FDI) and Investment from outside the State has been adopted on Joint venture (JV) mode to safeguard the interest of the tribal population of Mizoram. Various administrative support system and market support system are also announced. The Govt. of Mizoram is mandated in giving sustainable employment and introducing better utilization of land by introducing New Land Use Programme (NLUP).

OBJECTIVES

•        To create infrastructure facilities, provide incentives and marketing as well as technical support to industries.

•        To provide skill development and training for educated youth to develop entrepreneurial skills and make them self-employed.

•        To create employment opportunities particularly to the vulnerable section of the society and people in rural area, ensuring inclusive development.

•        To reduce sectoral and regional imbalance in the industrial development in the State by promoting Industries under all sectors.

•        To create proper linkage of processing Industries with the farm produce of agriculture, horticulture, forest and livestock’s.

•        To attract investment in the state.

IDENTIFICATION OF THRUST AREAS

Thrust will be given for those industries based on value addition of locally available resources. Special incentives will be formulated for speedy development of industrial units engaged in any of the following thrust sector Enterprises.

•        Forest-based Industries

The vast bamboo and other forest resources of Mizoram will be optimally harvested for setting up of Industry for manufacturing of various high value bamboo and other forest based products.

•        Food Processing Industries

Primary production of various food items, whether agricultural based, horticultural or livestock based will be linked with processing Industries.

•        Handloom Industries

Handloom sector will continue to receive serious attention of the Govt. Utmost importance will be given for improving quality product by introducing improved design, packaging, branding.

•        Handicraft Industries

The traditional skill of Mizo people will be upgraded and diversified for market competitiveness of handicraft products.

•        Plantain fibre and hill brooms

The Govt. will encourage value addition of hill-brooms. The flow of raw and unprocessed broom outside the state will be discouraged by giving attention towards value addition to help local industry.

•        Textile related industries

Bulk production of readymade garments will be encouraged as this sector is having good potential for market outside the state and export.

•        Animal Feed and poultry feed Industries

The Government is giving thrust towards having sufficient meat and meat products for which farming has been encouraged.

INCENTIVES

The incentives offered under the Rules for the grant of incentives/subsidies under the Industrial Policy of Mizoram State are-

•        Subsidies on the cost of Project Report 

•        Land subsidy

•        Factory rent subsidy

•        Manpower development subsidy

•        Interest subsidy

•        Power subsidy

•        Subsidy on Power Line 

•        Subsidy on Power Generating set

•        State Transport subsidy on Plant and Machinery 

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 21 of 22 | Total 212 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 21 22   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

MIG Welding Wire - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

MIG Wire is Copper coated strong wire. MIG wires are applied to weld numerous ferrous and non-ferrous materials and give sound results Solid copper coated welding wire for welding in gas shielding atmospheres. The high silicon contents and manganese alloyed in this wire. The higher contains of silicon and manganese increases the yield stress and tensile strength of weld metal. The high silicon content promotes a low sensitivity to surface impurities and contributes to smooth weld. Suitable for welding unalloyed and low alloyed construction steels with tensile strength below 640N/mm2 like boiler plate, fine–grained steels, pipe steels, shipbuilding steels and cast steels. MIG copper coated welding wire has excellent synthetic technological properties when corresponding welding flux is used, with a higher deposition efficiency, high quality and low intensity of labor. Wire diameter: 2.0mm, 2.5mm, 3.2mm, 4.0mm, 5.0mm.The use of wire makes MIG process a rapid one as compared to other welding processes. It is used in pressure Vessels, Heat Exchangers (Stainless Steel, Duplex Stainless Steel, carbon steel), Cryogenic (low temperature) as well as High temperature applications, automotive parts, transport Industries, copper base alloys and Nickel base alloys and Shipbuilding industry. The market for welding segment is divided into welding equipment and consumables in the ratio of 1:3. The welding market is divided between manual metal arc welding and automatic and semi-automatic equipment again in the ratio of 3:1. More than half of the market is in the organised sector. The welding machinery and electrodes market is basically served by two leading players, Advani-Oerlikon and Esab with sizable contributions from Ewac Alloys and Modi Industries. Indal and Ahura are other major players. New entrants in the industry are the MNCs: D&H Welding, Levicon Electric (USA), and Hyundai Corp of South Korea. Due to rapid growth of Industrial activities in Large/Medium and Small Scale Sector, the demand of mig welding Wire is in increasing order as the product is consumable.The product is widely demanded by railways, Ship building, chemical fertilizer, cement, petrochemical industries. There is demand in production of water pipe line also. The advantages of S A AND MIG welding is lesser labour cost, lesser rejection and perfect welding, hence the market.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under Ador Welding Ltd. B M W Ventures Ltd. D & H India Ltd. Dwekam Electrodes Pvt. Ltd. Esab India Ltd. Ewac Alloys Ltd. Indian Steel & Wire Products Ltd. Orde Industries Ltd. Superon Schweisstechnik India Ltd. Victor Electrodes Ltd. Weld Alloy Products Ltd.
Plant capacity: MIG Welding Wire : 12000 MT/annumPlant & machinery: 921 lakhs
Working capital: -T.C.I: Cost of Project: 2052 lakhs
Return: 27.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Baby & Adult Diaper & Sanitary Pads - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

A diaper or nappy is a kind of underwear that allows one to defecate or urinate in a discreet manner. When diapers become soiled, they require changing; this process is often performed by a second person such as a parent or caregiver. Diapers are primarily worn by children who are not yet potty trained or experience bedwetting. However, they can also be used by adults with incontinence or in certain circumstances where access to a toilet is unavailable. These can include the elderly, those with a physical or mental disability, and people working in extreme conditions such as astronauts. It is not uncommon for people to wear diapers under dry suits. Sanitary napkins are designed to absorb and retain menstrual fluid discharges. When used they are applied inside an undergarment with a press-on adhesive fixing strip. Over the next few decades, the disposable diaper industry boomed and the competition between Procter & Gamble's Pampers and Kimberly Clark's Huggies resulted in lower prices and drastic changes to diaper design. They have helped many families with low income to get diapers needed for their babies. Several improvements were made, such as the use of double gussets to improve diaper fit and containment. Today, the global market for absorbent hygiene products is over US $ 50 bn (including wipes).Further, a research report by RNCOS, “Indian Baby Care Market Analysis”, found that the market of disposable diapers is growing at snail pace compared to other segments of the baby care market.Many established brands, such as P&G, Kimberly-Clark, and Nobel hygiene are continuously adopting steps to grab more and more market share in this huge untapped market. Further research reveals that the Indian baby care market has substantially grown over the past few years and caught the attention of many international players. India's total personal hygiene market for women, spurred by a Government campaign to promote sanitary napkins among adolescent girls, is expected to reach Rs 2,000 crore by 2018, says a study.At present the production of about 900 mn pieces are manufactured in India and rest are imported. Total women in the age group of 15 - 54 years in India are about 300 mn. Total menstrual periods/year is 13 that last for 4 - 8 days and an average of 3pieces/day is used. Then consumption would be 58, 500 mn pieces/year. Present consumption is 2,659 mn pcs, i.e., 4.5% penetration while in Europe and USA it is well above 73 to 92%. Hence a growth rate well above 18 to 20% is expected in India. The Indian market is quite huge and as per reports available only 35% of India's requirement is manufactured in India, as of now. A huge market, great potential and excellent profit margin is envisaged in manufacturing of sanitary napkins in India. The Indian disposable diaper market is currently pegged at nearly Indian Rupees (Rs) 700m ($17.4m, E12.6m) and 30,000 tonnes/year, and is estimated to grow between 5-10% annually. It comprises brands like Huggies (60% market share) and Pampers (30%) from multinationals Kimberly Clark and Procter & Gamble, respectively. Domestic consumer products major Godrej's Snuggy is the third-largest brand of diapers in the Indian market, with a 10% share.As a whole there is a good scope for entrepreneurs for investment. Few Indian Major Players are as under Carewell Hygiene Products Ltd. Diapers India Ltd. Godrej Hygiene Products Ltd. Gufic Biosciences Ltd. Johnson & Johnson Ltd. Kimberly Clark Lever Pvt. Ltd. Procter & Gamble Hygiene & Health Care Ltd. Regency Diaper Inds. Ltd. Softouch Hygiene Products (Mkt) Ltd. Tainwala Personal Care Products Pvt. Ltd.
Plant capacity: Baby Diapers : 3000000 Pkts/annum Adult Diapers : 1500000 Pkts/annum Sanitary Napkins : 4500000 Pkts/annumPlant & machinery: 1029 lakhs
Working capital: -T.C.I: Cost of Project: 1657 lakhs
Return: 29.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Thermocol Cups, Plates & Glasses - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Thermocol has a particular characteristic: it gives the hand a sensation of velvety softness not experienced in contact with traditional types of plastic. Until recently Thermocol has been employed almost exclusively in the packing and thermoacoustic isolation sectors; utilizing new processes and sophisticated equipment has been possible to create containers for foods with a perfect retention of liquids. The disposable plastic cups, glass, plates and bowls are manufactured by thermoforming technique. They are fast replacing conventional cups, glass, plates and bowls. Ice-cream and other dairy products are packed in disposable cups. Besides Ice-cream industry, hotels, restaurants, canteens etc. have been increasingly using disposable items as against conventional glass-wares or ceramic cups, glass, plates and bowls. Thermocol plates, glass and cups making business is one kind of business which can never go out of date. As long as people celebrates various occasions thermocol plates, glass and cups business can never comes down. During occasions like marriages, birthday parties, festivals, social gatherings, and other parties these disposable items play very important role. Demand for foodservice disposables in the market is projected to increase 3.9 percent per year to $21.9 billion in 2019. Packaging will remain the most common product segment and will outpace service ware, napkins and other foodservice disposables. Retail and vending will be the fastest growing market, while eating and drinking places will remain dominant.As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Shalimar Pack (Group of Companies) • Biopac India Corporation Limited • Windsor Industries Private Limited • Essel Kitchenware Ltd • Siliguri Poly Products Pvt. Ltd.
Plant capacity: Thermocol Cups: 108,000 Th.Pcs/Annum Thermocol Glasses: 108,000 Th.Pcs/Annum Thermocol Plates: 21,600Th.Pcs/AnnumPlant & machinery: Rs. 69 lakhs
Working capital: -T.C.I: Cost of Project: Rs. 211 lakhs
Return: 28.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Foil -Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Aluminium plays a major role in the modern world through its innumerable forms of applications- from kitchen ware to electric conductors and from railway wagon to Appollo spacecraft. Because of its intrinsic and versatile properties of lightness, strength to weight ratio, corrosion resistance, electrical and thermal conductivity, non toxicity etc., a wide range of uses has opened up for this metal. Foil is a very thin sheet of rolled aluminium supplied in its pure form ('commercial purity') or in a variety of alloys and tempers which give a wide choice of tensile properties. The thickness of foil ranges from the thinnest currently produced commercially at about 0.0065 mm (or 6.5 µm) to the defined upper limit of 0.2 mm (or 200 µm).India is one of the key producers of aluminium foil in the region. Over 70% of aluminium foil used in India is for packaging applications. Pharmaceuticals followed by beverages, personal care and a wide range of food and non-food products, semi rigid containers and house foil are the principal applications of aluminium foil in India in the packaging sector. The total aluminium foil production in India is placed at around 35,000 tonne, of which Indal and India Foils account for a little over 50%. Indal is the biggest aluminum foil manufacturer in the country.Aluminum foil industry is growing annually at around 7%. In the near future, with the phenomenal rise in disposable incomes, the foil industry is expected to receive a boost. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Amco India Ltd. • Annapurna Foils Ltd. • Archer Metal Ltd. • Biopac India Corpn. Ltd. • Ess Dee Aluminium Ltd. • Flex Art Foil Ltd. • Green Pack Foils Pvt. Ltd. • Hindalco Industries Ltd.
Plant capacity: Household, Food Packaging: 3,000 MT/Annum Grade Aluminium Foil Pharmaceutical Grade Printed : 1,500 MT/Annum Laminated Aluminium Foil Insulation Grade Aluminium Foil: 1,500 MT/Annum Plant & machinery: Rs. 1340 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 2717 lakhs
Return: 27.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

Dairy Farming with Breeding and Dairy Products - Cattle Breeding Farm, Fodder, Livestock Farming, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Feasibility Study

Dairy farming has been part of agriculture for thousands of years, but historically, it was usually done on a small scale on mixed farms.But today, India derives nearly 33% of the gross Domestic population from agriculture and has 66% of economically active population, engaged in agriculture. The share of livestock product is estimated at 21% of total agriculture sector. Milk production alone involves more than 70 million producers, each raising one or two cows/buffaloes primarily for milk production.Milk is used as a food. It is used prepare curd, butter, ghee cream and ice cream etc. In addition to milk, the manure from animals provides a good source of organic matter for improving soil fertility and crop yields. The gobar gas from the dung is used as fuel for domestic purposes as also for running engines for drawing water from well. In Hinduism, cow urine has a special significance as a drink. Sprinkling of cow urine is said to have a spiritual cleansing effect as well. Gomutra is not a toxic waste material. 95% of it is water, 2.5% consists of urea, and the remaining 2.5% is a mixture of minerals, salts, hormones and enzymes. Dairy farming from being traditional family run businesses today has grown hugely to an organized dairy industry with technological specializations in every part of the process.There has been tremendous growth in dairy farming equipment that helps modern dairy farms to manage thousands of dairy cows and buffaloes. This huge boost in the industry has created a lot of farming jobs for the people.The demand for quality dairy products is rising in all over the world specially in developing countries, therefore to improve quality of milk and dairy product Indian dairy Industry needs to identify and address quality related problems at every stage from the producer at the village cooperative, to the dairy plant and the process of final delivery to the consumer.As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Amrut Industries Ltd. • Anmol Dairy Ltd. • Britannia Industries Ltd. • G R B Dairy Foods Pvt. Ltd. • Haryana Milk Foods Ltd. • Indiana Dairy Specialities Ltd. • Industrial Progressive (India) Ltd. • Mahaan Foods Ltd. • Milkfood Ltd. • Nikumbh Dairy Products Ltd.
Plant capacity: Milk: 1,800,000 Ltrs/Annum Curd : 360,000 Ltrs /Annum Butter Milk: 345,600 Ltrs /Annum Cheese: 36,000 kg /Annum Ghee: 14,400 Plant & machinery: Rs. 581 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 2047 lakhs
Return: 25.00%Break even: 43.00%
Add to Inquiry Add to Inquiry Basket

Jeans Manufacturing Unit - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Jeans are trousers, a type of garment, typically made from denimor dungareecloth. They come in many styles and colors. Jeans are dyed in every color of the rainbow.There are several advantages associated with denim jeans, which emerge when the denim jeans are compared with other types of clothing. It is on the basis of this advantage that people often opt to buy the denim jeans rather than other varieties of clothing (even when some of those others are considerably cheaper).One of those advantages of denim jeans over other types of clothing is in the fact that denim jeans tend to be highly durable. In India most of the denim manufacturers focus on the domestic markets as the value realisation remains higher in domestic market than in export markets.In the recent times the industry has witnessed entrance of new fabric manufacturers which is expected to make the market for denim fabric more price competitive in the coming years. The current domestic demand for denim is estimated at around 400mnmtrs,growing annuallyat around 13.5%. Although there is a slack in the market, it is still expected to grow at nearly 10% annually. The demand is projected to grow to 1,180 mnmtr in 2024-25.Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Aarvee Denims & Exports Ltd. • Arvind Lifestyle Brands Ltd. • Ashapura Garments Ltd. • Citi Global Finance Ltd. • Cotton County Retail Ltd. • Everblue Apparel Ltd. • Koutons Retail India Ltd. • Monarch Apparels (India) Ltd. • P J L Clothing (India) Pvt. Ltd. • Spykar Lifestyles Pvt. Ltd.
Plant capacity: Readymede Garment (Jeans) : 120,000 Pcs/AnnumPlant & machinery: Rs. 35 lakhs
Working capital: -T.C.I: Cost of Project : Rs. 415 lakhs
Return: 25.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Toughened Glass - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

It is difficult to conceive the contemporary architecture without glass.Glass is a non-crystalline amorphous solid that is often transparent and has widespread practical,technological, and decorative usage in, for example, window panes, tableware,and optoelectronics.Common glasses contain about 70% SiO2 Sodium carbonate, or soda ash decomposes, to sodium oxides as the batch of raw material melts. Consequentlyit acts as a flux. Toughened or tempered glass is a type of safety glass processed by controlled thermal or chemical treatments to increase its strength compared with normal glass. A fully tempered glass is 4 to 5 times stronger than an annealed glass of similar thickness. The total market of glass was valued at Rs. 60 bn with 80% supplied by domestic producers. The industry is growing at around 8% per annum.India exports about 13,000 tonne of glass per month to the Middle East, African countries, Europe and South America. The rapid increase in the demand for toughened glass in the domestic market has resulted in a cutback in exports by as much as 60% in the last couple of years.Indian glass industry consists as elsewhere of a number of distinct segments: architecture (45% market share), automotive (15% market share), and value added glass (10% market share), mirrors and furniture (15% market share), respectively.The industry is growing at around 15% per annum. Consumption per capita of glass in India is only 1.2 kg compared 15 kg in China, 9 kg in developed countries and 35 kg in the USA.As a whole there is a good scope for new entrepreneur with manufacturing of good quality of product. Few Indian Major Players are as under • Asahi India Glass Ltd. • Atul Glass Inds. Ltd. • Auroplast India Ltd. • Cherry Fashions Ltd. • Floatglass India Ltd. • Gobind Glass &Inds. Ltd. • Gold Plus Glass Industry Ltd. • Gujarat Borosil Ltd. • Gujarat Guardian Ltd. • H N G Float Glass Ltd.
Plant capacity: 384000 Sq.Mt./AnnumPlant & machinery: Rs. 280 lakhs
Working capital: -T.C.I: Cost of Project : Rs. 729 lakhs
Return: 26.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Dal Mill - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

India is the still by and large vegetarian in dietary habit and heavily depends upon vegetative source to meet out its daily protein requirement. India is bound to be global leader in terms of production and consumer of pulses. Since, India is leading importer of pulses; production of pulse/legume crops has been stagnant over the years. They are the main sources of protein. The important dals in the country are Channa,Moong, Urad, Moth, turdal and Masoor, Matar etc. The pulses are used for preparing hot dishes, sweet dishes and other varieties.Pulses are the important sources of proteins, vitamins and minerals and are popularly known as “Poor man’s meat” and “rich man’s vegetable”, contribute significantly to the nutritional security of the country.India is the largest producer (25% of global production), consumer (27% of world consumption) and importer (14%) of pulses in the world. The dal milling industry in India is one of the major agro processing industries in the country. From an annual production of 13.19 million tonnes of pulse in the country, 75% of these pulses are processed by dal mills.Most of these dal mills are in concentrated parts of India in pulses producing areas such as Indore, Jalgaon, Akola and Nagpur, or in and near by major consumption centres such as Kolkata, Chennai, Mumbai, Hyderabad and Delhi. There are many agricultural universities; ICAR recognized institutions in the country which have played a large role in developing improved dal mills. Some of these institutes are PKV Akola, CFTRI-Mysore, CIAE Bhopal and a handful more. These new and improved dal mills have a de-husking efficiency of approximately 95% and the split pulses yield stands at 80-85% which largely depends on the variety of the pulse and the conditioning of the pulse grain. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Agrimony Commodities Ltd. • Asian Health &Nutri Foods Ltd. • Bafna Agro Inds. Ltd. • Eco Farms (India) Pvt. Ltd. • Edible Products (India) Ltd. • Kumar Food Inds. Ltd. • Poona Dal & Oil Inds. Ltd. • Tata Chemicals Ltd.
Plant capacity: Pigeon peas: 12,000 MT/Annum Green Gram : 12,000 MT/Annum Chickpeas: 12,000 MT/AnnumPlant & machinery: Rs. 1908 lakhs
Working capital: -T.C.I: Cost of Project: Rs. 3128 lakhs
Return: 28.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

PVC Flex Banner - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

PVC flex is made out of PVC and fabric raw material, specially designed for solvent printing industry. It is suitable for indoor and outdoor printing used in billboard, display, banners and exhibition booth decoration.PVC flex is made out of PVC and fabric raw material, specially designed for solvent printing industry. It is suitable for indoor and outdoor printing used in billboard, display, banners and exhibition booth decoration. Large format digital printing flex media, PVC sheeting for digital printing like front lit flex in various gsm 260 gsm, 280 gsm, 300 gsm, 320 gsm, 340 gsm and 440 gsm and back lit flex in 550 gsm and 610 gsm and also we have vinyl, star flex type media. PVC Flex Banner is widely demanded all across the nation due to their perfect finish, attractive look, superior quality and long life. Flex banner has many advantages, such as light in weight, good mechanical performance, low cost, etc., and it can replace traditional plastic film and other materials in many fields such as advertisement, architecture, agriculture, environmental protection, and transportation etc. These are widely used for indoor and outdoor signage, building signs and in store displays, trade show displays, outdoor displays and screen printing and billboard. These banners are easy to process, install and clean.Billboards currently represent the most popularmode of outdoor advertising accounting for around 50% of the total outdoor advertising market..Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Pioneer Polyleathers Pvt Ltd • Canadian SpecialityVinyls, Inc. • Sunlex fabrics pvt. Ltd • DCP India Private Limited
Plant capacity: 4320000 Nos./AnnumPlant & machinery: Rs. 594lakhs
Working capital: -T.C.I: Cost of Project : Rs. 938 lakhs
Return: 26.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Thermocol Plates, Cups, Bowls and Glasses - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Thermocol has a particular characteristic: it gives the hand a sensation of velvety softness not experienced in contact with traditional types of plastic. Until recently Thermocol has been employed almost exclusively in the packing and thermoacoustic isolation sectors; utilizing new processes and sophisticated equipment has been possible to create containers for foods with a perfect retention of liquids. The disposable plastic cups, glass, plates and bowls are manufactured by thermoforming technique. They are fast replacing conventional cups, glass, plates and bowls. Ice-cream and other dairy products are packed in disposable cups. Besides Ice-cream industry, hotels, restaurants, canteens etc. have been increasingly using disposable items as against conventional glass-wares or ceramic cups, glass, plates and bowls. Thermocol plates, glass, bowls and cups making business is one kind of business which can never go out of date. As long as people celebrates various occasions thermocol plates, glass, bowls and cups business can never comes down. Demand for foodservice disposables in the market is projected to increase 3.9 percent per year to $21.9 billion in 2019. Packaging will remain the most common product segment and will outpace service ware, napkins and other foodservice disposables. Retail and vending will be the fastest growing market, while eating and drinking places will remain dominant. As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Shalimar Pack (Group of Companies) • Biopac India Corporation Limited • Windsor Industries Private Limited • Essel Kitchenware Ltd • Siliguri Poly Products Pvt. Ltd.
Plant capacity: Thermocol Cups: 30,000 Th.Pcs/Annum Thermocol Glasses : 30,000 Th.Pcs/Annum Thermocol Plates: 100000 Th.Pcs/Annum Thermocol bowls: 100000 Th.Pcs/AnnumPlant & machinery: Rs. 461 lakhs
Working capital: -T.C.I: Cost of Project: Rs. 717 lakhs
Return: 26.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 21 of 22 | Total 212 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 21 22   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.

NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search


Search Project Report & Profiles





Subjects