Best Business Opportunities in Meghalaya- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Meghalaya is a state in north-east India. The name means "the abode of clouds" in Sanskrit. As of 2011, the state has a population of 2,964,007 and is the 23rd most populous in the country. The population of Meghalaya as of 2014 is estimated to be 3,211,474. Meghalaya covers an area of approximately 22,430 square kilometers, with a length to breadth ratio of about 3:1

Meghalaya is predominantly an agrarian economy. Agriculture and allied activities engage nearly two-thirds of the total work force in Meghalaya. However, the contribution of this sector to the State's NSDP is only about one-third. Agriculture in the state is characterized by low productivity and unsustainable farm practices. Despite the large percentage of population engaged in agriculture, the state imports food from other Indian states.


TOURISM

 Meghalaya has some of the thickest surviving forests in the country and therefore constitutes one of the most important ecotourism circuit’s in India. The Meghalaya subtropical forests support a vast variety of flora and fauna. Meghalaya has 2 National Parks and 3 Wildlife Sanctuaries.   Meghalaya also offers many adventure tourism opportunities in the form of mountaineering, rock climbing, and trekking and hiking, water sports etc. The state offers several trekking routes, some of which also afford an opportunity to encounter rare animals such as slow loris, assorted deer and bear. The Umiam Lake has a water sports complex with facilities such as rowboats, paddleboats, sailing boats, cruise-boats, water-scooters and speedboats. Tourism in India is a growing industry, and as per World Tourism Organization predictions, India will be a leader in using tourism as an employment generator. The State of Meghalaya must be placed in a strategic position to take advantage of this growth.

“MEGHALAYA TOURISM DEVELOPMENT CORPORATION” has been set up for developing and promotion of Tourism in Meghalaya. The Corporation shall make efforts to increase its revenue to enable to carry out promotional activities. MTDC will organize package tours not only to Cherrapunjee but to other tourist destinations; organize training for guides, etc.

INDUSTRIAL SECTOR

The New Industrial & Investment Promotion Policy is designed to facilitate investments in new sectors across the State and thus ensure accelerated and sustained growth. The Policy focuses to attract, facilitate and promote wider expectations and high end investment.

There is an urgent need to promote investment in backward and difficult but resource rich areas. Therefore the policy provides additional incentives and support for such investments.


OBJECTIVE OF THE POLICY

•        To promote investment in all sectors

•        Generate employment opportunities for the local people in the industries and allied sectors.

•        To provide special incentives for promoting local Entrepreneurs in setting up of micro, small & medium manufacturing and service enterprises.

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage.

•        Achieve a balanced and growth oriented development covering the entire state through promotion of village and small scale industries.

•        Encourage need based development of local entrepreneurial skills through intensive motivation and training programmes at District, Sub-division and Block levels.

•        Provide guidance to prospective entrepreneurs by building up a data bank of project-profiles and other connected information. Special support to local entrepreneurs will be provided, and monitoring will be done to enable them to be successful.

•        Simplify rules and procedures by providing a single-window clearance facility for all investment proposals as applicable.

•        Promote Tourism, and make Meghalaya a tourist destination.

•        Promote IT as industries.

•        Promote first generation entrepreneurs. Government will encourage setting up of Entrepreneurship Development Institute by private or in PPP mode.

SALIENT FEATURES OF THE INDUSTRIAL POLICY

•        State Government believes in promoting private enterprises for speedy economic development of the State. The Government also stands committed to ensuring the healthy growth of existing industries. For this purpose, Government will ensure optimum number of industries by not permitting excess in any specific sector, thereby ensuring sustainability of existing business.

•        Enterprises promoted and managed by “Woman Entrepreneur”/physically challenged will get additional 10 % (ten percent) incentives on the State Capital Investment Subsidy.

•        Meghalaya has a long international border which needs immediate attention for development. To address this issue, 10 Kms towards the State from the International border is declared as “PRIORITY AREA” and enterprises set up within the 10 Kms area will be given special incentives to be known as “Border Area Subsidy”.

•        Government of Meghalaya recognizes:

1.       Hotels (not below two star category) and Amusement Parks.

2.       Medical and health services in the nature of nursing homes with a minimum capacity of 25 beds and Super – Specialty Health Care.

3.       Vocational training Institutes.


INDUSTRIES IDENTIFIED AS THRUST AREAS

                    Agro Based Industries :

   Horticulture – Based Units

   Biotechnology Based Units

   Medicinal Plants, Tea and Rubber

                       Animal Husbandry and Meat Processing Industries

         Development of Mineral based Industries:

      Coal-Based Industries

     Limestone Based Industries- Cement Plants, Lime Plants,

                      Calcium Carbide   Plants.

                       Electronics & Information Technology

INCENTIVES FOR LARGE AND MEDIUM SCALE INDUSTRIES

•        For large and medium scale industries, there are subsidies like capital investment subsidy, interest subsidy, power subsidy, subsidy on cost of pollution/quality-control measures, special subsidy for pioneer units in backward areas etc.

•        Exemption from the payment of applicable service tax for seven years to a "Tourism Unit"

•        Sales Tax exemption on sale of finished products for a period of seven years from the date of commercial production.

•        Reimbursement of Central Sales Tax (CST) paid on purchase of Capital Equipment installed till the date of project commissioning.

•        Partial exemption for applicable stamp duty.

INVESTMENT POLICIES

Meghalaya Government has always endeavored to set up the right kind of business climate to motivate investments in the State. In order to attract investment to the various sectors and thus contribute to the development of the economy as a whole.

The major being the industrial policy, which had been announced with a view to take advantage of the liberalized economic scenario in the country and also to keep pace with development in the national industrial sector are-

•        Generate employment opportunities for the local people in the industries and allied sectors

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage. Create a conducive environment for industrial development by creation of the basic Infrastructural facilities and by setting up of industrial areas, growth centre and export promotion industrial park.

•        Provide preference to local Entrepreneurship in setting up of large, medium and small-scale units.

•        Promote local interests through joint ventures with external investors so as to facilitate technology transfer and capital flow by a package of suitable incentives.

•        Encourage setting up of export-oriented, Agro based, Mineral-based, Horticultural based and Electronic units as thrust area.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 21 of 33 | Total 328 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 21 32 33   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Instant Noodles - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Many fast food items have flooded the markets but noodles have emerged as the most popular item as it is cheaper, very easy to make and nutritious. Urban and semi-urban markets are controlled by Maggi and other players are Top Ramen and other brands. Maggi has revolutionised the concept and this product has gone to majority of the urban households. As an off-shoot of this development, noodles have become very popular in India. Instant noodles are mostly fried noodles which are made of flour, water, alkaline salt and other additives. The consumption of instant noodles is global due to their characteristics such as convenience to eat, easy to mass-produce, widely acceptable taste, preferred texture and affordable prices. Instant noodles are dried or precooked noodles fused with oil, and often sold with a packet of flavoring. India is the world’s fifth-largest consumer of instant noodles. The instant noodles market in India has been growing, mainly driven by urbanization and changing lifestyle. In addition, many international instant noodle brands have entered the Indian market in recent years and shaken up the industry that had been dominated by a monopoly for almost 30 years. The noodle strands coming out from the pair of cutting rolls are processed into different kinds of noodles such as uncooked wet noodles (nama-men), dried noodles (kan-men) , boiled noodles (yude-men). Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Indo Nissin Foods Ltd. • M T R Foods Pvt. Ltd. • Nestle India Ltd. • Om Oil & Flour Mills Ltd. • Surya Agroils Ltd. • Vikas W S P Ltd.
Plant capacity: Instant Noodles (75 gms Pouches):5000 Kgs/DayPlant & machinery: Rs 125 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 386 Lakhs
Return: 25.83%Break even: 54.21%
Add to Inquiry Add to Inquiry Basket

PVC Shrink Sleeves - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Shrink sleeve labels are sleeves constructed from film material that, rather than using adhesive, shrinks to a product’s surface when heat is applied. This type of labeling allows the graphics to be printed around the entire circumference as well as take the shape of the product’s container. The eye-catching design of 360° graphics that form-fit containers has great consumer appeal. The shrink label can best be described as a film label printed on an oriented plastic sheet or tube, which, when heat is applied to the label, conforms – or shrinks - to the contour of the container. There are two different types of shrink label: the shrink sleeve label and the rollfed, wrap-around shrink label. Shrink wrap/sleeve is applied over or around the intended item, often by automated equipment. It is then heated by a heat gun or sent through a shrink tunnel or oven for shrinking. Shrink wrap/sleeve can be supplied in several forms. Flat rollstock can be wrapped around a product, often with heat sealing to tack the film together. Center folded film is supplied on a roll with the plastic is folded in half: product is placed in the center portion, the remaining three edges are sealed to form a bag, and the package then heated which causes the bag to shrink and conform to the product placed in the bag. Shrink wrap can be used to wrap buildings. It can wrap roofs after hurricanes, earthquakes, tornadoes and other disasters. Shrink wrap can be used for environmental containments to facilitate safe removal of asbestos, lead and other hazards. Few Indian Major Players are as under • Haldyn Corporation Ltd. • Heatshrink Technologies Ltd. • Powertel Engineering Pvt. Ltd. • Raychem-R P G Pvt. Ltd. • Saraswati International Ltd. • Shree Shree Telecom Pvt. Ltd. • Srikanth Optic Systems Ltd.
Plant capacity: PVC Shrink Sleeves:400 Pkts/DayPlant & machinery: Rs 72 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 202 Lakhs
Return: 13.16%Break even: 66.91%
Add to Inquiry Add to Inquiry Basket

Dairy Farming & Dairy Products (Pasteurised Milk & Curd) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Plant Layout

In India dairying has been practiced as a rural cottage industry since the remote past. Semi commercial dairying started with the establishment of military dairy farms and cooperative milk unions throughout the country towards the end of the Nineteenth century. However market milk technology may be considered to have commenced in 1950, with the functioning of the Central Dairy of Aarey milk colony, and milk product technology in 1956 with the establishment of AMUL Dairy, Anand. The importance of milk in human diet especially for children and expectant and nursing matters is vital. To meet the demand of the increasing population milk production in India has to be increased. It is neither possible nor desirable to increase the cattle and buffalo population to achieve this target. This can only be achieved by stepping up milk production of our bovine population by cross breeding of cows and use of improved cows and cow. ? In choosing dairying as a life work, plan to develop the best herd possible. New programs, such as artificial breeding, have helped to remove some of the most difficult problems in the development and improvement of dairy herds. Not only will you want to development pride of ownership of a good herd of cows but also you will want to produce high quality milk as efficiently as possible. Milk is a naturally nutrient rich and affordable product, with a high nutrient to energy ratio. Milk and dairy products are an important food group in many national dietary guidelines and may play a role in dietary quality. Few Indian Major Players are as under • Amrut Industries Ltd. • Anmol Dairy Ltd. • Hatsun Agro Products Ltd. • Heritage Foods Ltd. • Herman Milkfoods Ltd. • Indiana Dairy Specialities Ltd. • Kwality Ltd. • Mother Dairy Fruit & Vegetables Pvt. Ltd. • Mother Dairy India Ltd. • Mother Dairy Kerala Ltd. • Nikumbh Dairy Products Ltd. • Premier Industries (India) Ltd. • V R S Foods Ltd. • Vimal Dairy Ltd.
Plant capacity: Cows: 250 Nos • Pasturised Milk (1 Ltr & 500 ml Packs):6000 Ltrs/Day •Curd (250 ml Cups & Pouch Packs):4000 Ltrs/ DayPlant & machinery: Rs 277 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 605 Lakhs
Return: 25.72%Break even: 47.38%
Add to Inquiry Add to Inquiry Basket

Tundish Insulated Powder (Radex) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost & Revenue

In modern steelmaking and casting plants, steel is produced either in a basic oxygen furnace (BOF) or in an electric arc furnace (EAF). In a BOF, hot metal and scrap are blown by oxygen gas with a flux addition, such as lime, to remove carbon, phosphorus, sulfur, and silicon. A modern EAF produces steel by remelting and refining steel scrap and other raw materials, and also uses oxygen gas injection and lime addition. The steel melt with dissolved oxygen thus produced is tapped into a ladle, where it is deoxidized with ferroalloys, Fe-Si, Fe-Si-Mn, and/or metallic aluminum. The deoxidation products, such as silica, mangano silicates, alumina, alumino silicates, aluminates and/or their composites, are largely removed from the melt by flotation. Whenever necessary, the deoxidized melt is further processed in a ladle furnace (LF) to remove any remaining suspended oxide particles (called non-metallic inclusions, or simply inclusions), to lower the sulfur content, and to adjust the melt’s chemistry and temperature. Degassing of steel melt is done in vacuum refining facilities (RH, VAD, or VOD) to decrease hydrogen for crack sensitive grades and/or carbon for ultra low carbon grades to meet customer specifications. The increasing cost of power and the rapid depletion of conventional sources of energy have necessitated effective heat management and energy conservation in industrial processes. Tundish Insulating powder (TIP) products provide high compressive strength and low shrinkage at high temperatures; and thus offer a cost-effective energy management solution for industrial processes. The increasing cost of power and the rapid depletion of conventional sources of energy have necessitated effective heat management and energy conservation in industrial processes. Tundish Insulating Powder (TIP) products provide high compressive strength and low shrinkage at high temperatures; and thus offer a cost-effective energy management solution for industrial processes. Tundish Insulating Powder products are materials used in application requiring high temperatures (generally more than 1000°C) across various end use industries. New emerging applications of Tundish Insulating Powder (TIP) include aerospace and fire protection. Growing need to conserve energy across various industries is expected to be a key driver for the market. Additionally, stringent regulations imposed on cement, oil & gas and metal producers to reduce green house emissions has also had a significant impact on developing market demand.
Plant capacity: 12 Mt/DayPlant & machinery: Rs 8 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 77 Lakhs
Return: 17.59%Break even: 64.56%
Add to Inquiry Add to Inquiry Basket

Surgical Blade & Disposable Scalpel - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

A scalpel is a small but extremely sharp knife used for surgery, anatomical dissection, and various arts and crafts. Scalpels may be disposable or re-usable. Scalpel blades are usually of hardened and tempered steel. Surgical scalpels consist of two parts, a blade and a handle. Standard Surgical Blades are available in both high carbon and stainless steel. Stainless steel single-piece surgical blades are strong and corrosion-resistant to provide superior cutting ability. These are essential tools for surgical incision. Scalpels are used for a variety of surgeries and medical procedures. Scalpels and blades are a crucial component to cardiac surgery, interventional cardiovascular surgery, successful bypass surgery and cardiac transplant surgery. In addition to cardiovascular surgery, endoscopic surgery has seen a demand for high quality surgical scalpels and blades. Precision incision equipment is needed in procedures such as appendectomies, hernia repair, intestinal surgeries and diagnostic biopsy operations. The Indian technology is now are able to manufacture small yet extremely sharp scalpels and surgical blades. At present market share of India is around 10-12% of world market. Surgical Blade & Disposable Scalpel sale from India is increasing at the rate of 25-30% per year. In the specialty blade and scalpel market, ophthalmic scalpels account for the largest increase in sales. Few Indian Major Players are as under • Aditya Dispomed Products Pvt Ltd, • Jai Surgical Ltd, • Kehr Surgical Pvt. Ltd, • Paramount Surgimed Pvt Ltd. • Ribble International Ltd.
Plant capacity: 40000 Pcs/DayPlant & machinery: Rs 140 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 210 Lakhs (Land & Building)
Return: 30.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

Surgical Blade & Disposable Scalpel - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

A scalpel is a small but extremely sharp knife used for surgery, anatomical dissection, and various arts and crafts. Scalpels may be disposable or re-usable. Scalpel blades are usually of hardened and tempered steel. Surgical scalpels consist of two parts, a blade and a handle. Standard Surgical Blades are available in both high carbon and stainless steel. Stainless steel single-piece surgical blades are strong and corrosion-resistant to provide superior cutting ability. These are essential tools for surgical incision. Scalpels are used for a variety of surgeries and medical procedures. Scalpels and blades are a crucial component to cardiac surgery, interventional cardiovascular surgery, successful bypass surgery and cardiac transplant surgery. In addition to cardiovascular surgery, endoscopic surgery has seen a demand for high quality surgical scalpels and blades. Precision incision equipment is needed in procedures such as appendectomies, hernia repair, intestinal surgeries and diagnostic biopsy operations. The Indian technology is now are able to manufacture small yet extremely sharp scalpels and surgical blades. At present market share of India is around 10-12% of world market. Surgical Blade & Disposable Scalpel sale from India is increasing at the rate of 25-30% per year. In the specialty blade and scalpel market, ophthalmic scalpels account for the largest increase in sales. Few Indian Major Players are as under • Aditya Dispomed Products Pvt Ltd, • Jai Surgical Ltd, • Kehr Surgical Pvt. Ltd, • Paramount Surgimed Pvt Ltd. • Ribble International Ltd.
Plant capacity: 80000 Pcs/DayPlant & machinery: Rs 190 Lakhs
Working capital: -T.C.I: Rs 320 Lakhs (Land & Building not covered)
Return: 38.50%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Multiplex Cinema Hall (84+84 Seats Double Screen) - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout

A Multiplex is a multi screen entertainment complex showing different films under one roof with other type of supporting business in the vicinity like restaurants, shopping arcade and other entertainment avenues. Emergence of multiplexes has made movie going and event. People can go at just about any time and find something to watch. It also enables exhibitor to show a variety of movies appealing to several segments of movie goers while serving patrons from common support facilities such as box office, concession areas, rest room and lobby. The growing share of entertainment expenditure in the disposable income pie is driving a revolution around India’s favorite entertainment option today -Movies. The combination of cinema with other services and facilities has led to the burgeoning growth of multiplexes around the country. Multiplex embodies the luxurious amenities of the modern day cinema -the multiple screen choices, state-of-the-art technology, ergonomic seating, eye-catching architecture, and top of the line concessions, restaurants, and food courts integrating shopping with cinema to generate better opportunities and making it lucrative
Plant capacity: 84 Seats Double ScreenPlant & machinery: Rs 152 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 463 Lakhs
Return: 14.95%Break even: 62.49%
Add to Inquiry Add to Inquiry Basket

Multiplex Cinema Hall (164 Seats Single Screen) - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout

A Multiplex is a multi screen entertainment complex showing different films under one roof with other type of supporting business in the vicinity like restaurants, shopping arcade and other entertainment avenues. Emergence of multiplexes has made movie going and event. People can go at just about any time and find something to watch. It also enables exhibitor to show a variety of movies appealing to several segments of movie goers while serving patrons from common support facilities such as box office, concession areas, rest room and lobby. The growing share of entertainment expenditure in the disposable income pie is driving a revolution around India’s favorite entertainment option today -Movies. The combination of cinema with other services and facilities has led to the burgeoning growth of multiplexes around the country. Multiplex embodies the luxurious amenities of the modern day cinema -the multiple screen choices, state-of-the-art technology, ergonomic seating, eye-catching architecture, and top of the line concessions, restaurants, and food courts integrating shopping with cinema to generate better opportunities and making it lucrative.
Plant capacity: 164 Seats Single ScreenPlant & machinery: Rs 112 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 343 Lakhs
Return: 20.38%Break even: 59.39%
Add to Inquiry Add to Inquiry Basket

Integrated Unit RMC with Stone Crusher - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Concrete is most vital material in modern construction. It has versatile properties like easy mouldability, high compressive strength and long lasting durability. These properties of concrete have made it most popular construction material for all types of civil engineering works. The latest developments in concrete technology have made it possible to use it in intricate and architecturally complex structures, requiring high degree of performance and aesthetic appearance. In addition to normal concrete, other varieties in use are, high strength and high performance concrete, self compacting, light weight, high density, fibre reinforced, polymer, coloured concrete etc. Concrete is basically a mixture of Portland Cement, water and aggregates comprising sand and gravel or crushed stone. In traditional construction sites, each of these materials is procured separately and mixed in specified proportions at site to make concrete. Ready Mix Concrete, or RMX as it is popularly called, refers to concrete that is specifically manufactured elsewhere and transported in a Transit Mixer for delivery to the customer's construction site in a ready-to-use freshly mixed state. RMX can be custom-made to suit different applications. Ready Mix Concrete is bought and sold by volume - usually expressed in cubic meters. Few Indian Major Players are as under • A C C Concrete Ltd. • A C C Ltd. • Ahlcon Ready Mix Concrete Pvt. Ltd. • Ashoka Buildcon Ltd. • Binani Ready Mix Concrete Ltd. • My Home Inds. Ltd. • N C L Industries Ltd. • Navkar Builders Ltd. • Prism Cement Ltd. • R D C Concrete (India) Pvt. Ltd. • Ramco Cements Ltd. • Samruddhi Cement Ltd. • Tantia Constructions Ltd. • Tarmac (India) Pvt. Ltd. • Telecommunications Consultants India Ltd. • Trishul Concrete Products Ltd. • Ultratech Cement Ltd.
Plant capacity: Ready Mix Concrete : 62.5 Cu Mt/Day •Stone Crusher:62.5 Cu Mt/DayPlant & machinery: Rs 234 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 762 Lakhs
Return: 24.39%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Chilli Oil - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Spices are used for flavour, colour, aroma and preservation of food or beverages. Spices may be derived from many parts of the plant: bark, buds, flowers, fruits, leaves, rhizomes, roots, seeds, stigmas and styles or the entire plant tops. The term ‘herb’ is used as a subset of spice and refers to plants with aromatic leaves. Spices are often dried and used in a processed but complete state. Another option is to prepare extracts such as essential oils by distilling the raw spice material (wet or dry), or to use solvents to extract oleoresins and other standardized products. Spice oils are basically extracts from the spice seeds or spice plant parts and they are 100 percent pure extracts that retain the full body and flavor profile of the particular spice. Chili is available in throughout India. It is specially available in the U.P, Himachal Pradesh and other states. Chili is one of the abundantly domestically used as well as commercially used spices. Chili can be commercially exploited for extraction of chili oil and oleoresin afterwards it can be ground in Chili powders as used ground chili spices. For extraction of chili oil and oleoresin, there will be use of solvent extraction process or steam distillation process. It is used in the food industry as a flavouring agent, beverages, candy/sugar confectionery, cookies etc. , It can be used in the medicinal purpose , It can be used in the aroma therapy , It can be used in the preparation of derivatives of essential oils and oleoresin , It can be used in Chinese cuisines, It can be used as dip for various dishes. Few Indian Major Players are as under • A V T Natural Products Ltd. • Akay Flavours & Aromatics Pvt. Ltd. • Enjayes Spices & Chemical Oils Ltd. • K C P Biotech Ltd. • Kancor Ingredients Ltd. • Naturite Agro Products Ltd. • Sijmak Oils Ltd. • South East Agro Inds. Ltd. • Synthite Industries Ltd. • Techno Chemical Inds. Ltd.
Plant capacity: Chilli Oil :20 Kgs/Day •Chilli Oleoresin:60 Kgs/DayPlant & machinery: Rs 57 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 147 Lakhs
Return: 27.91%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 21 of 33 | Total 328 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 21 32 33   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.

NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search


Search Project Report & Profiles





Subjects