Best Business Opportunities in Jharkhand- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mining & Minerals: Project Opportunities in Jharkhand

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

The newly carved out resource rich State of Jharkhand is widely acclaimed as the region of the future, having immense potential for industrialisation with its large deposits of minerals which could provide a firm launching pad for various industries.

RESOURCES:

Jharkhand is one of the richest zones of minerals in the world. The 40% of the total minerals of the country are available in this state. The State is the sole producer of cooking coal, uranium and pyrite. It ranks first in the production of coal, mica, kyanite and copper in India. The geographical exploration and exploitation of gold, silver, base metals, decorative stones, precious stones, etc. are the potential areas of the future. Jharkhand is also endowed with other resources such as surface and ground water, land with immense bio-diversity, moderate climate, disciplined and skilled manpower, adequate availability of power, which are the basic essentials for the growth and development of industries.

GOVERNMENT POLICIES:

Jharkhand region is generously endowed with Mineral Wealth and the State Government is committed to create an environment conducive to the growth of Mining and Mineral based Industries in the State. In view of this, the State's Industrial policy covers certain clauses relevant for Mining and Mineral sector, which are enumerated below:

•        Simplify procedures and expedite granting of mining leases.

•        Provide certain relief to make mining activities easier.

•        Encourage use of modern exploration techniques to set up a resource inventory of various minerals in the State.

•        Encourage joint venture projects with SMDC.

•        Clear mining lease applications and project report within 60 days.

•        Encourage foreign investment and technological collaboration by OCBs and NRIs in selected sectors including Mineral development.

•        Encourage Private Sector participation in Mining Activities

Jharkhand State Mineral Development Corporation Ltd. was incorporated on 7th May, 2002 after bifurcation from Bihar State Mineral Development Corporation Ltd. JSMDC is a Government of Jharkhand Undertaking under the Dept. of Mines & Geology, Govt. of Jharkhand. It is premier producer and supplier of minerals and mineral based products in the State of Jharkhand. Core business of the Company is production and marketing of coal, limestone and its powder, kyanite, graphite, granite blocks and manufacturing of granite tiles of smaller dimensions. JSMDC is a consistently making profit company. Annual turnover is more than 100 Crores in the current fiscal year.

 

 

 

Agro-Based Industries: Project Opportunities in Jharkhand

 

 

PROFILE:

 

Agro-based industry would mean any activity involved in cultivation, under controlled conditions of agricultural and horticultural crops, including floriculture and cultivation of vegetables and post-harvest operation on all fruits and vegetables. The development of agro-industries has assumed crucial importance in the economic planning and progress of the country. The agro industry is regarded as an extended arm of agriculture. The development of the agro industry can help stabilise and make agriculture more lucrative and create employment opportunities both at the production and marketing stages. The broad-based development of the agro-products industry will improve both the social and physical infrastructure of India. Since it would cause diversification and commercialization of agriculture, it will thus enhance the incomes of farmers and create food surpluses. The state of Jharkhand having diversified agro-climatic conditions is much suited for the development horticulture based economy that has ample scope for its growth.

RESOURCES:

The agro-climatic conditions of the State are conducive for commercial cultivation of large varieties of fruits, vegetables,flowers and medicinal and aromatic plants. Plantation and Horticulture is one of the important sub sectors of Agriculture having ample scope for expansion in the state of Jharkhand. The state of Jharkhand has a total geographical area of 79.7 lakh ha out of which cultivable land is 38 lakh ha. The net irrigated area is only 1.57 lakh ha which is only 8% of the net sown area. The total area occupied for plantation and horticulture crop in the state is about 2.57 lakh hectares. Different kinds of fruits are grown in Jharkhand. The crops grown in Jharkhand are Mango, Litchi, Stone fruit (Peach), Citrus (Lime/Lemon), Awla and Papaya in fruits, Chilli, Turmeric and Ginger in spices, Rose, Marigold, Gerbera, Carnation and Gladiolus among flowers, Lemon grass, Palmarosa and Rosa damascena in aromatic plants, Cashew in Plantation crops. Jharkhand endowed with vast impounded fresh water resources in the form of tank/ponds and reservoirs. The major plantation crops cultivated in the State are cashew nut and coconut. The Board has identified the State as high potential State for coconut cultivation as the average productivity of coconut palm is 36 nuts per palm, which is above the national average of 34 nuts. Cashew nuts popularly known as a gold mine of wastelands is very ideal for cultivation in wastelands and hence there is good potential for cashew cultivation especially in East and West Singhbhum districts. Tea plantation in a small measure has been taken up in Ranchi district, which has a favourable climate for growing tea.

 

 

 

GOVERNMENT POLICIES:

 

 The promotion of Agro-based industries is among the priorities of the State Government. The state has assured supply of fruits & vegetables grown by applying scientific techniques, investment in post harvest and good transport infrastructure. The National Horticulture Mission (NHM) in the Jharkhand State was launched in late 2005-06 initially in 10 districts with main focus on production of planting materials, vegetable seed production, establishment of new gardens, creation of water resources etc. Establishment of new gardens include perennial and non perennial fruits, spices, floriculture, aromatic and medicinal plants. This scheme was 100 % sponsored by Central Govt. during 2005-06 and 2006-07 (Xth Five Year Plan). However, during 2007-08 and onwards (XIth Five Year Plan) this scheme has been implemented in 15 districts with the pattern of assistance as 85:15 by Central Govt. and State Govt. respectively. The Jharkhand government has decided to set up a food park to kick off the development of the food processing sector in the state and attract investors. In general very few small scale food processing industries are present in the state.

 

 

 

 Sericulture (Tasar Silk): Project Opportunities in Jharkhand

 

PROFILE:

Sericulture is an agro-based industry. It involves rearing of silkworms for the production of raw silk, which is the yarn obtained out of cocoons spun by certain species of insects. The major activities of sericulture comprises of food-plant cultivation to feed the silkworms which spin silk cocoons and reeling the cocoons for unwinding the silk filament for value added benefits such as processing and weaving. Silk is a fine strand of fiber that is a solidified secretion produced by certain caterpillars to encase themselves in the form of cocoons. India is second largest producer of silk. Sericulture industry is looking out for the developments of young age silk worm rearing or chawki rearing. Care of silk worms start from the stage of procurement of silk worm eggs from the grainage itself. Silk worm eggs are distributed to the farmers for commercial rearing when active development of embryo is in progress. The important aspect of young silkworm rearing management are a suitable separate rearing house or room, well maintained mulberry garden with assured irrigation facilities. Sericulture has emerged as a virtual lifeline and a profitable employment avenue for villagers in Maoist-affected areas in India's eastern Jharkhand. Under the aegis of the Jharkhand state industrial department, farmers are beginning to rear silkworms.

RESOURCES:

Jharkhand, much like Chattisgarh and Uttaranchal, is endowed with adequate forest cover. These forests are home to two species of trees -Arjuna (Terminalia Arjuna) & Asan (Terminalia Tomentosa) which are breeding ground for the moth which produces the cocoon from which Tasar yarn is reeled. Jharkhand's forest department is also planning to encourage planting of Arjuna trees in place of the traditional Acacia or Eucalyptus trees. Tussar Food plants are available over an area of 9 lakh hectares. The Singhbhum and Santhalpargana regions are the main silk producing centres in the State. The State is promoting this activity through 28 pilot project centres situated in different areas. Each rearer can rear on an average 200 eggs or Disease Free Laying (DFLs) so the annual demand of commercial seed or egg is of 130 lakh. There are three types of seeds or eggs – Nucleus, Basic seed and Basic seed multiplied to commercial seed.

GOVERNMENT RESOURCES:

Tasar culture is a backbone for Tribal development, and the Government of India, through the Central Silk Board and different State Governments have initiated several developmental and welfare measures for the tribal welfare through it. Jharkhand's forest department is also planning to encourage planting of Arjuna trees in place of the traditional Acacia or Eucalyptus trees. Jharkhand Sericulture Development Institute (JSDI) and Jharkhand Silk Technical Development Institute (JSTDI) are being strengthened to give an impetus to this sector. During the year 2010-11, it is proposed to rear 2.35 lakh tasar nucleus DFLs, 16 lakh of tasar basic DFLs and 96 lakh of commercial DFLs through seed and commercial rearers in the State. It is proposed to be benefited 40,000 -50,000 Tasar farmers through Tasar seed production and its rearing during the year.

 

Steel Industry

 

PROFILE:

Steel Industry is a booming industry in the whole world. India’s economic growth is contingent upon the growth of the Indian steel industry. Consumption of steel is taken to be an indicator of economic development. While steel continues to have a stronghold in traditional sectors such as construction, housing and ground transportation, special steels are increasingly used in engineering industries such as power generation, petrochemicals and fertilisers. Indian Steel Industry is more than a century old. India has now emerged as the eighth largest producer of steel in the world with a production capacity of 35MT. Almost all varieties of steel is now produced in India. India has also emerged as a net exporter of steel which shows that Indian steel is being increasingly accepted in the global market. The growth of the steel industry in India is also dependant, to a large extent, on the level of consumption of steel in the domestic market. Steel consumption is significant in housing and infrastructure. In recent years the surge in housing industry of India has led to increase in the domestic demand for steel.

 

 

RESOURCES:

Jharkhand emerges as hub for steel companies. The state is endowed with deposits of Iron Ores of both, Hematite & Magnetite. The Hematite deposits are mainly located in the West Singhbhum District and have a resource base exceeding 3700 Million Tonnes. These have been explored only in pockets by large industry houses in their lease hold. There is a very good scope of enlarging this resource base by further exploration. The Magnetite Deposits are located in the East Singhbhum, Latehar & Palamu districts. They comprise lenticular ore bodies as well as Schist rocks with 80 to 36% magnetic. The exploration of these bodies is yet to be taken up. The existing steel mills are sourcing their iron ore (Hematite) from West Singhbhum. The Magnetite ore is being used in heavy media coal washeries & paints. Tata Steel's largest plant is located in Jamshedpur, Jharkhand, with its recent acquisitions; the company has become a multinational with operations in various countries. If the interest shown by all the companies, big and small, in Jharkhand's iron ore deposits translates into reality, the state will produce more than half the total steel in India. First Iron & steel factory  is located at Jamshedpur and Largest Steel plant in Asia is Bokaro steel plant.

 

GOVERNMENT POLICIES:

Under the new industrial policy, iron and steel has been made one of the high priority industries. Price and distribution controls have been removed  as well as foreign direct investment up to 100% (under automatic route) has been permitted.  The Trade Policy has also been liberalized and import and export of iron and steel is freely allowed with no quantitative restrictions on import of iron and steel items. Tariffs on various items of iron and steel have drastically come down since 1991-92 levels and the government is committed to bring them down to the international levels.  With the abolishing of price regulation of iron and steel in 92, the steel prices are market determined. The policy devises a multi-pronged strategy to achieve these targets with following focus areas; removal of supply constraints especially availability  of critical inputs like iron ore; improve cost competitiveness by expanding and strengthening the infrastructure in roads, railways, ports and power; increase exports; meet the additional capital requirements by mobilizing financial resources; promote investments by removing  procedural delays. In addition the policy also addresses challenges arising out of environmental concerns, human resource requirements, R&D, volatile steel prices and the secondary sector. 

 

Rural Industries: Project Opportunities in Jharkhand

 

PROFILE:

Rural industry is an important source of employment for workers shifting out of agriculture. The rural industry continues to play a significant role in the expansion ofemployment, improvement in productivity and earnings, and poverty reduction in many non-industrialized countries; this is particularly the case in India. This sector has immense export potential which needs to be exploited to earn foreign exchange. To give thrust, the government aims to provide benefits in the various areas such as handloom, handicrafts, khadi village industries, forest based industries etc.

RESOURCES:

Handloom is labour intensive cottage industry sector providing employment to around 1.5 lakh weavers throughout the State. Various incentives to the handloom weavers are being provided under Deendayal Hastkargha Protsahan Yojana, which aims attaking care of wide gamut of activities, such as basic inputs like looms and accessories, product development, infrastructure support, institutional support, training to weavers, supply of equipment and marketing support, both at micro and macro levels in an integrated and coordinated manner for an overall development of the sector and benefit to handloom weavers. Handicrafts of Jharkhand reflect the cultural heritage, customs and traditions of the State. The State manufactures handicrafts in cane and bamboo works, woodcarving, stoneware, brassware, Lac based handicraft items, paper mache, terracotta, etc. The State Government may set up a model suitable ‘Handicraft Village’ in each of the districts of the State for promoting the traditional arts and crafts of the villages by adopting the "One Tambon One Product" model of Thailand. Various forest produce available in the state are mahua seed, sal seed, shellac, bamboo, kendu leaf, harre, bahera, etc.

 

GOVERNMENT POLICIES:

Focus of the Rural Industrial Policy:-

1.       Providing ample employment opportunities through rural industries.

2.       Establishing rural industries and providing help on priority basis for skill enhancement, modern technology, and marketing especially for beneficiaries of scheduled caste, scheduled tribe, backward, and minority sections.

3.       Giving priority to participation of women in development of rural industries.

4.       Encouraging participation of private sector, non-governmental organizations, cooperative societies, and self help groups for development of rural industries.

5.       Implementing cluster approach.

6.       Value addition to the minor forest produce and medicinal herbs in the tribal areas of the state itself and passing on the benefits to the tribal population of the area.

7.       Connecting rural industries with E-commerce.

With the implementation of the Rural Industrial Policy, active participation of experienced craftsmen and industrialists in the field of handloom, handicraft, leather industry, other cottage industries and silk centers would be ensured for overall development of rural industries in the rural areas.

 

 

Tourism: Project Opportunities in Jharkhand

 

PROFILE:

Tourism is one of the fastest growing industries in the world. The number of tourists worldwide has been registering phenomenal growth and it is expected that this number would shortly touch 1.5 billion. Tourism contributes about 11% of the world work force and 10.2% of the global gross domestic products. The dynamic growth of this industry is evident from the fact that a new job is added to this sector every 2.5 second. Jharkhand is endowed with rich cultural heritage and bestowed liberally with bounties of nature. Various initiatives are being taken by the Government and other organizations to promote tourism here. Jharkhand is blessed with an exotic landscape: the rolling hills, beautiful plateaus, sparkling rivers, etc. that largely contribute towards tourism at Jharkhand. Besides, the national parks, wildlife sanctuaries, holy shrines and museums, etc. largely attracts tourists to come to Jharkhand.

RESOURCES:

Blessed with immense biodiversity, moderate climate, rich cultural and historical heritage, Jharkhand is fast emerging as an ultimate tourist destination in eastern India. Jharkhand Tourism Department is taking utmost initiative to promote tourism in Jharkhand. A good number of hotels run by Jharkhand Tourism and private hoteliers have come up at popular tourist spots, which cater to all segments of travellers. Several Jharkhand Tourism Information Centers have been opened up in various parts of the city. These information centers provide details about Jharkhand travel, hotels, tourist attractions, travel agencies, licensed Jharkhand tourism guides and other important travel tips to holiday makers. Some of the major tourist spots in Jharkhand that play a vital role in the tourism industry of Jharkhand are: Netarhat, Betla National Park, Baidyanath Dham so on. It is noteworthy in this context that Kanke Dam, Ranchi Hill, Tagore Hill, Hatia Dam, Dasham Falls, Jagannath mandir, Jonah Falls, Hoondru waterfalls, etc. are the projects under the Tourism Industry of Jharkhand that heavily contributes towards the economy of the State.

GOVERNMENT POLICIES:

Jharkhand has huge potential in tourism sector. The tourism potential of the state has not been exploited and at the same time tourist spots have not been highlighted at national and international level. Jharkhand government seems to be serious to promote tourism in the state. The State Government would set up a Jharkhand Tourism Development Board to facilitate enter departmental co-operation and coordination to promote Tourism in the State. This Board would be set up under the chairmanship of the Chief Minister of Jharkhand with the Tourism Minister as Vice-chairman and Principal Secretaries/Secretaries of other relevant departments as members. The Board would also have representatives of the Hotel Association, Travel Agents Association, Adventure Sports Operators Association, NGO's and other non-official members having outstanding contribution or expertise in the field of development and promotion of tourism industries. Financial assistance as grants-in-aid, etc would be provided (to this board). The Board would advise the Government to lay down the policy guidelines for the development and promotion of tourism industry in the State, to promote public-private partnership and public sector would undertake all steps to develop and promote tourism in the State.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 31 of 81 | Total 808 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 31 80 81   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

FROZEN FOODS HAVING GOOD EXPORT AND DOMESTIC DEMAND - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Cost of Project

It is part of age-old human experience that food remains in fresh condition longer in cool than in warm weather. Hence it is not surprising that one of the first applications of mechanical refrigeration was to cool perishable food to prolong their storage life. It was claimed in 1968 that there were 2823 types of frozen foods, including 639 types of frozen vegetables, 446 frozen deserts, and 448 types of frozen seafood. It is further stated that 58% of the volume of frozen foods is fruit juices and vegetables. It is also said that frozen soups account for 11.4% and baked goods for 10.1%. Before freezing, it is necessary to blanch the product to destroy enzymes, which would result in off-flavours and consequent quality deterioration. Rapid freezing is important, since just as with ice cream, it results in a smoother product having smaller ice crystals and a more natural body and texture. In the first freezing systems the product was frozen by being subjected to high velocity air at temp. as low as 400F. The next important was that of the birds eye system, in which the product was frozen extremely rapidly, by being clamped tightly between very old refrigerated plants at – 20 to – 400F. This gave very rapid heat transfer and quick cooling resulting in marked improvement in the quality of both and vegetables the details of the system vary somewhat with the product the rate of freezing depends upon the size of packages but in usually on the order of ½ hr to 1 hr. Calculation of Refrigeration Requirements: Fruits and Vegetables are high in water content, and are absorbed much refrigeration. FREEZING Many vegetables are seasonal crops, abundant at certain times of the year, and not readily available at other times of the year. In order to extend availability all year round, methods of preservation are needed. These methods may alter the characteristics of the vegetables; some to a small extent, some to a large extent. They may also be effective over different time periods. Some extend shelf life by only a few weeks, some give a shelf-life of many months. The changes in the tissue characteristics consequent upon the preservation technique may be more market where long storage lives are required. for long-term storage, extending from months to years, canning (in which product is placed in a hermetically sealed container, and then heated sufficiently to achieve sterility) and freezing (in which product is cooled down to temperatures below – 200C and maintained at these temperatures) are the primary preservation techniques. Freezing is often preferred over canning, because the alternations to the tissues, such as softening and colour changes, may be less marked. Preservation by freezing makes use of the phenomenon that rates of chemical change are generally reduced at lower temperatures. Rates of physical change, too, may be reduced at sufficiently low temperatures, so that a product may be stored at low temperatures for extended periods without there being too much change in its properties compared to those it had at the commencement of the storage period. The freezing process itself, however, may result in change. There are commodities, such as lettuce, preservation of that particular commodity. It is generally true that the lower the temperature of storage, the slower the rate of change in properties. Because freezing involves the separation of some of the water in the product as ice, with consequent increase in the concentrations in the unfrozen phase, and potential crystallization or precipitation of other components, the rate of deterioration may be affected by factors other than the temperature linked slowdown. Higher solute concentrations may induce increased rates of change in some chemical processes (1). Also, low temperatures may enhance the rates of some crystallization processes. The rates of change in frozen systems could then be a complex function of temperature. There may be a temperature region with enhanced rates of change just below 00C in some systems. However, at sufficiently low temperatures, of rates of change will reduce. This is illustrated schematically in Figure. The upper line illustrates rate enhancement due to freezing. The lower line illustrates rate inhibition due to freezing. The centre line represents the rate to be expected on the predictions of the Arhenius rate expression. The arhenius expression in inappropriate for use in frozen systems, as it does not allow for the complex changes, which accompany the separation of crystalline ice, but assumes the system stays on uniform phase. It has recently been shown that, in systems containing ice, the temperature dependence of the kinetics in the unfrozen phase may better be described by an equation, known as the Williams-Landel-Ferry equation, which describes the temperature dependence of kinetics in rubbery systems. To-day frozen foods are available in retail and institutional outlets over all areas of the country. The total annual commercial production is estimated to be more than ten billion pounds. Obviously, what is produced must be marketed. To day some 250,000 retail stores have frozen food departments and 75 percent of the Industry out put is sold through supermarkets. The distribution channels of produce run through a long chain of middlemen by and large the processing industry gets its few materials from the maindis or wholesales markets. There are of course a few large units who have their orchard and farms. But even these depend extensively on mandis. The industry does not get preferential treatment in credit allocations. The raw materials used by it being highly perishable, the financial reckoning of security is extremely conservative. However, finished products are subjected to the usual norms for purposes of bank financing.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

TOMATO PULP - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Tomato pulp is very much popular item derived from tomato fruit. It is a ground form of tomato having only 6% solid content. A wide variety of products are available by processing tomato pulp. Tomato pulp is used for the production of a wide variety of tomato products like sauce, ketchup, juice, etc. By adding proper additions and keeping under specified conditions, tomato pulp can be preserved for a longer period. Other items like puree and cocktail. Processed fruits and vegetables have a very good potential in the export market. The food processing industry has a higher employment potential with a relatively low investment hence, there exists vast areas for new entrants for the development of this industry.
Plant capacity: 10,000 Bottles/Day Plant & machinery: 19 Lakhs
Working capital: -T.C.I: 158 Lakhs
Return: 51.00%Break even: 37.00%
Add to Inquiry Add to Inquiry Basket

STAINLESS STEEL TUBES / PIPES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Stainless Steel tubes are widely used in the dairy & food processing industries, heat exchangers, evaporators, cooling units, stock lives and condensers, such as those used in chemical digestive food liners, blow lines, evaporation pulp and paper industry, pharmaceutical industry production flow lines, aircraft tubing, hydraulic lines, air conditioning and pressurizing tubes, oil lines, electrical controls and switches, fuel lines, flexible joints & connections, exhaust turbine assemblies, oxygen tanks, stationary, etc. so there is a good demand of such products. The demand for steel pipes and tubes is increasing day by day, especially in the automobile industry.
Plant capacity: 600 MT/Annum Plant & machinery: 101 Lakhs
Working capital: -T.C.I: Cost of Project : 282 Lakhs
Return: 41.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

COAL TAR PITCH - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic

Coal tar pitch is the residue from the processing of coal tar. Since pitch constituents over 50% of crude tar, its utilization has a major effect on the economics of tar processing. Coal tar pitch is binder for carbon electrodes base for paints and coating. Pitch is a valuable binder for briquetting and in making electrodes. The aluminium industry of the world depends heavily on electrodes made from petroleum coke, pitch coke and pitch. Because of its valuable water proofing properties, pitch is employed in a number of formulations for treating walls, roofs and floors. The scope of pitch as pitch mixture and creosote constitute road tar and fuels, and end user industries have very good market. There is a good scope for new entrepreneurs.
Plant capacity: 7500 MT/Annum Plant & machinery: 143 Lakhs
Working capital: -T.C.I: Cost of Project : 340 Lakhs
Return: 43.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

SEAMLESS TUBES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic

Manufacturing of steel tubes and pipes is basically a large scale engineering industry. Mild steel demand as raw material for pipe and tubes manufacture units are fully met with indigenous sources. Seamless tubes have a variety of uses. They are used in boilers, bearings, hydraulic cylinders, generic engineering equipment and oil exploration,
Plant capacity: 1,20,000 MT/Annum Plant & machinery: 653 Lakhs
Working capital: -T.C.I: Cost of Project : 2274 Lakhs
Return: 46.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

FILTERATION AND AIRTIGHT PACKING OF COCONUT OIL - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Coconut oil, also known as coconut butter, is a tropical oil with many applications. It is extracted from copra (derived from the word "kopra" which means dried coconut). Coconut oil constitutes seven percent of the total export income of the Philippines, the world's largest exporter of the product. Coconut oil is a fat consisting of about 90% saturated fat. The oil contains predominantly medium chain triglycerides, with roughly 92% saturated fatty acids, 6% monounsaturated fatty acids, and 2% polyunsaturated fatty acids. Of the saturated fatty acids, coconut oil is primarily 44.6% lauric acid, 16.8% myristic acid a 8.2% palmitic acid and 8% caprylic acid, although it contains seven different saturated fatty acids in total. Its only monounsaturated fatty acid is oleic acid while its only polyunsaturated fatty acid is linoleic acid. Unrefined coconut oil melts at 24-25°C (76°F) and smokes at 170°C (350°F),while refined coconut oil has a higher smoke point of 232°C (450°F). Among the most stable of all oils, coconut oil is slow to oxidize and thus resistant to rancidity, lasting up to two years due to its high saturated fat content.[citation needed] In order to extend shelf life, it is best stored in solid form (i.e. below 24.5°C [76°F]). Coconut oil is used in volume quantities for making margarine, soap and cosmetics.Hydrogenated or partially-hydrogenated coconut oil is often used in non-dairy creamers, and snack foods.Fractionated coconut oil is also used in the manufacture of essences, massage oils and cosmetics Coconut oil is an important component of many industrial lubricants, for example in the cold rolling of steel strip.Coconut oil has to be refined and filtered, and then only it can be used for edible purposes. The fine primary functions for are: hygiene, protection, customer convenience, identification & sales appeal and facts. Coconut oil is used in India as a cooking fat, hair oil, body oil and industrial oil. Coconut oil is made from fully dried copra having maximum moisture content of six per cent. Steam cooking of copra is also practised by some millers to enhance the quality and aroma of oil. Coconut oil is marketed in bulk as well as in packs ranging from sachets containing 5 ml. to 15kg tins. The branded coconut oil in small packs is mainly marketed as hair oil and body oil. There are several brands known for their superior grade oil which have export market throughout the world. India has unbeatable quality advantage in this sector. Refined coconut oil is also manufactured in the country for industrial uses. Refined coconut oil is mainly used in the manufacture of biscuits, chocolates and other confectionery items, ice cream, pharmaceutical products and costly paints. Generally, filtered coconut oil is used for cooking and toiletry purposes. India accounts for nearly 20% of global coconut output. Coconut oil is the main cooking oil in the south Indian State of Kerala. Kerala, Tamil Nadu, Andhra Pradesh and Maharashtra are leading producers of coconut in the country. Kerala and Tamil Nadu are the major centres of coconut oil and copra in the country. Besides cooking coconut oil is also used extensively on cosmetics, toiletries, hair tonics and slew of other industries. The price of coconut oil is shaped by variations in production, global demand and supply situation and price of other vegetable oils.
Plant capacity: 600 Tons/Annum Plant & machinery: 19 Lakhs
Working capital: -T.C.I: Cost of Project : 94 Lakhs
Return: 43.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

FILTRATION AND AIRTIGHT PACKING OF COCONUT OIL - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Coconut oil, also known as coconut butter, is a tropical oil with many applications. It is extracted from copra (derived from the word "kopra" which means dried coconut). Coconut oil constitutes seven percent of the total export income of the Philippines, the world's largest exporter of the product. Coconut oil is a fat consisting of about 90% saturated fat. The oil contains predominantly medium chain triglycerides, with roughly 92% saturated fatty acids, 6% monounsaturated fatty acids, and 2% polyunsaturated fatty acids. Of the saturated fatty acids, coconut oil is primarily 44.6% lauric acid, 16.8% myristic acid a 8.2% palmitic acid and 8% caprylic acid, although it contains seven different saturated fatty acids in total. Its only monounsaturated fatty acid is oleic acid while its only polyunsaturated fatty acid is linoleic acid. Unrefined coconut oil melts at 24-25°C (76°F) and smokes at 170°C (350°F),while refined coconut oil has a higher smoke point of 232°C (450°F). Among the most stable of all oils, coconut oil is slow to oxidize and thus resistant to rancidity, lasting up to two years due to its high saturated fat content.[citation needed] In order to extend shelf life, it is best stored in solid form (i.e. below 24.5°C [76°F]). Coconut oil is used in volume quantities for making margarine, soap and cosmetics.Hydrogenated or partially-hydrogenated coconut oil is often used in non-dairy creamers, and snack foods.Fractionated coconut oil is also used in the manufacture of essences, massage oils and cosmetics Coconut oil is an important component of many industrial lubricants, for example in the cold rolling of steel strip.Coconut oil has to be refined and filtered, and then only it can be used for edible purposes. The fine primary functions for are: hygiene, protection, customer convenience, identification & sales appeal and facts. Coconut oil is used in India as a cooking fat, hair oil, body oil and industrial oil. Coconut oil is made from fully dried copra having maximum moisture content of six per cent. Steam cooking of copra is also practised by some millers to enhance the quality and aroma of oil. Coconut oil is marketed in bulk as well as in packs ranging from sachets containing 5 ml. to 15kg tins. The branded coconut oil in small packs is mainly marketed as hair oil and body oil. There are several brands known for their superior grade oil which have export market throughout the world. India has unbeatable quality advantage in this sector. Refined coconut oil is also manufactured in the country for industrial uses. Refined coconut oil is mainly used in the manufacture of biscuits, chocolates and other confectionery items, ice cream, pharmaceutical products and costly paints. Generally, filtered coconut oil is used for cooking and toiletry purposes. India accounts for nearly 20% of global coconut output. Coconut oil is the main cooking oil in the south Indian State of Kerala. Kerala, Tamil Nadu, Andhra Pradesh and Maharashtra are leading producers of coconut in the country. Kerala and Tamil Nadu are the major centres of coconut oil and copra in the country. Besides cooking coconut oil is also used extensively on cosmetics, toiletries, hair tonics and slew of other industries. The price of coconut oil is shaped by variations in production, global demand and supply situation and price of other vegetable oils.
Plant capacity: 600 Tons/Annum Plant & machinery: 19 Lakhs
Working capital: -T.C.I: Cost of Project : 94 Lakhs
Return: 43.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

Pre-painted Coloured Galvanized Roofing Steel Sheet (Plain & Corrugated) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

There is significant increase in demand for pre-coated galvanized sheet-for industrial, storage and warehousing projects. In USA & Europe 55% Aluminium Zinc coated steel is used for roofing which gives increased life compared to ordinary coated sheets. The corrugated galvanized iron sheets are extensively used in various fields e.g. Industrial sheds, dairy farm sheds, poultry farm sheds and warehouses etc. for roofing purpose. It is observed that asbestos cemented roof sheet, plastic corrugated sheet, and red mud sheets are also used in the construction of industrial shed. However, the use of asbestos sheet is not preferred and there is a potential for growth of this product, in industrial projects, warehouses and storage establishments.
Plant capacity: 15 MT / DayPlant & machinery: 58 Lakhs
Working capital: -T.C.I: 793 Lakhs
Return: 50.00%Break even: 27.00%
Add to Inquiry Add to Inquiry Basket

Refined Vegetable Oil - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Refined vegetable oil is considered to be high quality edible oil because of its non-cholesterol properties. Its main use in the world is in cooking, pharmaceuticals, bakery goods & other edible products. In refined vegetable oil, the term refining is applied to the operation of pretreatment and de-acidification or neutralization, its complete process involves bleaching & deodorization. The oil is basically produced from four different seeds which are edible in nature. The demand of refined vegetable oil is increasing day by day because of its large consumption in bakery & pharmaceuticals.
Plant capacity: 75 MT / DayPlant & machinery: 141 Lakhs
Working capital: -T.C.I: 3395 Lakhs
Return: 55.00%Break even: 22.00%
Add to Inquiry Add to Inquiry Basket

Modified Potato Starch - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Potato starch is essential as a universal binding and food thickening agent. Leveraging on over expertise in potato starch production, we began producing modified potato starch that is specially customized for various applications in food, textile and paper manufacturing industries. It is estimated that about 5 million tons of starch are currently used by the world paper industry that is about 1.5% starch by weight including all grades of paper and paperboard. Modified starch opportunities in Asia is expected to grow at a faster rate than paper production growth due to improvement in paper quality and utilization of higher than used amounts of recycled fibres, agricultural fibres and mineral fillers.
Plant capacity: 167 MT / DayPlant & machinery: 463 Lakhs
Working capital: -T.C.I: 3843 Lakhs
Return: 51.00%Break even: 27.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 31 of 81 | Total 808 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 31 80 81   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.

NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search


Search Project Report & Profiles





Subjects