Best Business Opportunities in Haryana - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Food & Agro Processing: Project Opportunities in Haryana

PROFILE:

Food processing is a large sector that covers activities such as agriculture, horticulture, plantation, animal husbandry’s and fisheries. India is the world's second largest producer of food and has the potential of being the biggest with the food and agricultural sector. The total food production in India is likely to double in the next ten years and there is an opportunity for large investments in food and food processing technologies, skills and equipment, especially in areas of Canning, Dairy and Food Processing, Specialty Processing, Packaging, Frozen Food/Refrigeration and Thermo Processing. Fruits & Vegetables, Fisheries, Milk & Milk Products, Meat & Poultry, Packaged/Convenience Foods, Alcoholic Beverages & Soft Drinks and Grains are important sub-sectors of the food processing industry. India is one of the major food producers of world but accounts for less than 1.5 per cent of international food trade.

 

RESOURCES:

Haryana has made a significant contribution in agricultural production in the country. Agriculture is the mainstay of more than 75 per cent population in Haryana, with contribution of 28.2 per cent in GDP of the State. Rice, wheat, jowar, bajra, maize, barley and pulses are the major crops of the State. Under the diversification of crops, more and more area is being brought under cash crops like sugarcane, cotton, oilseeds, etc. New crops like castor, groundnut, soyabean and horticulture crops (vegetables and fruits) are also being encouraged. Efforts are being made to encourage intensive and extensive farming in the State. Sustainable agriculture is being promoted through the propagation of resource conserving technologies and organic farming.

Besides, Haryana is called the land of milk, with having one of the highest productions of dairy products in the country. Haryana also ranks second in fish productivity in India. Rivers, canals and drains are the main sources for capturing fisheries in Haryana. The State has Asia's biggest agricultural University known as Chaudhry Charan Singh Haryana Agricultural University at Hisar, which has already made a significant contribution in ushering 'Green Revolution'.

 

GOVERNMENT POLICIES:

The salient features of the new agricultural policy are:

•        Over 4 per cent annual growth rate aimed over next two decades.

•        Greater private sector participation through contract farming, Price protection for farmers.

•        National agricultural insurance scheme to be launched.

•        Rational utilisation of country's water resources for optimum use of irrigation potential.

•        High priority to development of animal husbandry, poultry, dairy and aquaculture.

•        Capital inflow and assured markets for crop production.

•        Exemption from payment of capital gains tax on compulsory acquisition of agricultural land.

•        Minimise fluctuations in commodity prices.

•        Continuous monitoring of international prices.

•        Plant varieties to be protected through legislation. Adequate and timely supply of quality inputs to farmers.

•        High priority to rural electrification.

•        Setting up of agro-processing units and creation of off-farm employment in rural areas.

 

Automobile: Project Opportunities in Haryana

PROFILE:

The automotive industry in India is one of the largest in the world and one of the fastest growing globally. India's passenger car and commercial vehicle manufacturing industry is the seventh largest in the world, with an annual production of more than 3.7 million units in 2010. Automotive industry is the key driver of any growing economy. It plays a pivotal role in country's rapid economic and industrial development. It caters to the requirement of equipment for basic industries like steel, non-ferrous metals, fertilisers, refineries, petrochemicals, shipping, textiles, plastics, glass, rubber, capital equipments, logistics, paper, cement, sugar, etc. It facilitates the improvement in various infrastructure facilities like power, rail and road transport. Due to its deep forward and backward linkages with almost every segment of the economy, the industry has a strong and positive multiplier effect and thus propels progress of a nation. The automotive industry comprises of the automobile and the auto component sectors.

RESOURCES:

Automobile manufacturing sector constitutes Haryana’s primary strength, thanks to the presence of Maruti-Suzuki, Hero-Honda, Honda Motors, Escorts which have led to the development of a large number of ancillaries in this Sector. Gurgaon-Manesar-Bawal region has  been  identified  as  an  Auto  Hub  by  the  Government  of  India.  A number of auto & auto component units have already set up base in this hub. Maruti-Suzuki has already rolled-out its one-millionth car in a year. Haryana is all set to draw huge investments in the auto sector. In the last 45 days, the Haryana government has attracted investments close to Rs 1,000 crore in the sector, giving tough competition to its arch rival Punjab.

GOVERNMENT POLICIES:

Following new initiatives are expected to provide a further boost to this industry:

i) The HSIIDC had earlier allotted 8 acres of land to Automotive Research Association of India (ARAI) in IMT Manesar, for setting up Automotive Testing Laboratory, which is being run by National Automotive Testing, R&D Infrastructure Project (NATRIP). Another site measuring 46 acres has been allotted at concessional rates in IMT Manesar. The foundation stone for this facility has been laid on the 4th of June 2010. The availability of Testing and R&D facility at this centre will facilitate further development of auto & auto components industry in the State; 

ii) It is proposed to create a railway siding facility in IMT Manesar for smooth transportation of the manufactured goods from out of the IMT area for export and across various destinations in the country;

iii) The State would encourage establishment of a Logistics Centre Facility in PPP mode or through the private sector in IMT Manesar for efficient inventory management and dispatches by the industries.

Textiles: Project Opportunities in Haryana

PROFILE:

Textile is a very important part of our life, be it the clothes we wear or the bed and furnishings that we use in our daily life. The history of textile industry is very rich and has impacted the world economy in a big way. It is one of the oldest form of craft and dates back to Neolithic age. Initially twigs, leave and branches were weaved but subsequently other natural fibres were interlaced to form cloth and fabrics.

RESOURCES:

Haryana boasts of a robust handloom tradition, especially in Panipat and an equally vibrant handicraft tradition. Panipat is a major textile town of India famous for its rugs and upholstery fabric. Traditionally women would weave durries (rugs) and khes (thick coverlets) for household use whenever they would be free from agricultural and household work. However, today theses rugs, especially the panja durries (named after a weaving method) are marketed all over the world. Thick fabrics are a speciality of Haryana, as climatic conditions do not allow the use of fine threads in normal looms. The weavers have also developed their skills using thick threads and can weave many beautiful and complicated designs.

GOVERNMENT POLICIES:

The Ministry of Textiles in India has formulated numerous policies and schemes for the development of the textile industry in India. The government of India has been following a policy of promoting and encouraging the handloom sector through a number of programmes. Most of the schematic interventions of the government of India in the ninth and tenth plan period have been through the state agencies and co-operative societies in the handloom industries. Some of the major acts relating to textile industry include: Central Silk Board Act, 1948, The Textiles Committee Act, 1963, The Handlooms Act, 1985, Cotton Control Order, 1986, The Textile Undertakings Act, 1995 Government of India is earnestly trying to provide all the relevant facilities for the textile industry to utilize its full potential and achieve the target. The textile industry is presently experiencing an average annual growth rate of 9-10% and is expected to grow at a rate of 16% in value, which will eventually reach the target of US $ 115 billion by 2012. The clothing and apparel sector are expected to grow at a rate of 21 %t in value terms.

 

Power: Project Opportunities in Haryana

PROFILE:

The power industry plays a vital role in the economic development of any country. Electricity is a key driver of rapid economic growth and industrialization in the country. It is one of the critical infrastructure on which development of several economic sectors depend. India is the world's sixth largest energy consumer accounting for about 3.5% of the world's total annual energy consumption. Availability of reliable and quality power at competitive rates to Indian industry is necessary to make it globally competitive and to enable it to exploit the tremendous potential of employment generation. Over the years, Indian power industry has shown considerable growth. Foreign direct investment (FDI) up to 100 percent has been permitted through automatic route in generation, transmission and distribution segments.

 

RESOURCES:

The power industry plays a vital role in the economic development of any country. Electricity is a key driver of rapid economic growth and industrialization in the country. It is one of the critical infrastructure on which development of several economic sectors depend. India is the world's sixth largest energy consumer accounting for about 3.5% of the world's total annual energy consumption. Availability of reliable and quality power at competitive rates to Indian industry is necessary to make it globally competitive and to enable it to exploit the tremendous potential of employment generation. Over the years, Indian power industry has shown considerable growth. Foreign direct investment (FDI) up to 100 percent has been permitted through automatic route in generation, transmission and distribution segments.

 

GOVERNMENT POLICIES:

The Government of India has modified the Mega Power Policy to smoothen the procedures further.  The modified Mega Power Policy is as follows:

(i) The power projects with the following threshold capacity shall be eligible for the benefit of mega power policy:

(a) A thermal power plant of capacity 1000 MW or more; or

(b) A thermal power plant of capacity of 700 MW or more located in the States of J&K, Sikkim, Arunachal Pradesh, Assam, Meghalaya, Manipur, Mizoram, Nagaland and Tripura or

(c) A hydel power plant of capacity of 500 MW or more

(d) A hydel power plant of a capacity of 350 MW or more, located in the States of J&K, Sikkim, Arunachal Pradesh, Assam, Meghalaya, Manipur, Mizoram, Nagaland and Tripura; 

(e) Government has decided to extend mega policy benefits to brownfield (expansion) projects also. In case of   brownfield (expansion) phase of the existing mega project, size of the expansion unit(s) would not be not less than that provided in the earlier phase of the project granted mega power project certificate. 

 

Tourism: Project Opportunities in Haryana

PROFILE:

Tourism in India is the largest service industry, with a contribution of 6.23% to the national GDP and 8.78% of the total employment in India. The tourism industry in India is substantial and vibrant, and the country is fast becoming a major global destination. India’s travel and tourism industry is one of them most profitable industries in the country, and also credited with contributing a substantial amount of foreign exchange. Indian Tourism offers a potpourri of different cultures, traditions, festivals, and places of interest.

RESOURCES:

The state of Haryana is blessed with the bounty of nature. Tourism in India is the largest service industry, with a contribution of 6.23% to the national GDP and 8.78% of the total employment in India. The tourism industry in India is substantial and vibrant, and the country is fast becoming a major global destination. India’s travel and tourism industry is one of them most profitable industries in the country, and also credited with contributing a substantial amount of foreign exchange. Indian Tourism offers a potpourri of different cultures, traditions, festivals, and places of interest.

The state of Haryana houses several Sikh Gurdwaras that represents the secular tradition of the people of the state. Apart from performing the religious duties, the Gurdwaras also engage in several social activities. Representing the variant cultural tradition of the state, Haryana has many Muslim "Shrines" that attracts. The Muslim Shrines are noted for their architectural styles. Haryana houses several "Churches" that adds to the diversity of the state. The ceilings of the Church are ornamented with beautiful designs and the walls are adorned with paintings which reflect the artistic imagination of the past golden era.

The state boasts of several places of Pilgrims which have a significant religious and historical importance. The historical place of Kurukshetra, Jyotisar, Thaneshwar, Pehowa and Panchkula reminds one of the rich historical past of our country. The state of Haryana boasts of the rich bio- diversity of the regions which is manifested through the vast reserve of the rare and endangered species of birds in the famous wild life sanctuary of the Sultanpur Bird Sanctuary. Haryana also has several "forts" that adds to the historicity of the state. The strategic location of Haryana was guarded by the construction of huge Forts.

GOVERNMENT POLICIES:

In order to develop tourism in India in a systematic manner, position it as a major engine of economic growth and to harness its direct and multiplier effects for employment and poverty eradication in an environmentally sustainable manner, the National Tourism Policy was formulated in the year 2002. Broadly, the Policy attempts to:-

•        Position tourism as a major engine of economic growth;

•        Harness the direct and multiplier effects of tourism for employment generation, economic development and providing impetus to rural tourism;

•        Focus on domestic tourism as a major driver of tourism growth.

•        Position India as a global brand to take advantage of the burgeoning global travel trade and the vast untapped potential of India as a destination;

•        Acknowledges the critical role of private sector with government working as a pro-active facilitator and catalyst;

•        Create and develop integrated tourism circuits based on India’s unique civilization, heritage, and culture in partnership with States, private sector and other agencies; and

•        Ensure that the tourist to India gets physically invigorated, mentally rejuvenated, culturally enriched, spiritually elevated and “feel India from within”.

 

E-Waste Management: Project Opportunities in Haryana

PROFILE:

E-waste is a popular, informal name for electronic products nearing the end of their useful life. E-wastes are considered dangerous, as certain components of some electronic products contain materials that are hazardous, depending on their condition and density. The hazardous content of these materials pose a threat to human health and environment. Discarded computers, televisions, VCRs, stereos, copiers, fax machines, electric lamps, cell phones, audio equipment and batteries if improperly disposed can leach lead and other substances into soil and groundwater. Many of these products can be reused, refurbished, or recycled in an environmentally sound manner so that they are less harmful to the ecosystem. This paper highlights the hazards of e-wastes, the need for its appropriate management and options that can be implemented.

 

RESOURCES:

Gurgaon known for being the home to over two hundred Fortune 500 companies and a hub of BPOs, Gurgaon is also the biggest producer of e-waste. A recent study revealed that Gurgaon generates about 8,000 metric tonnes (MT) of e-waste every year, the highest in the country. The groundwater in Gurgaon is contaminated with lead and heavy metals because of the unregulated disposal of e-waste and other solid and liquid waste, says the study.

Haryana, in fact, is still to implement its e-waste policy even after the Central Pollution Control Board notified it long back. The e-waste was growing at the pace of 20 per cent annually in India. It was going up in Delhi region, that includes Gurgaon, at the phenomenal rate of more than 40 per cent, it said. It is estimated that the Delhi region would produce about six lakh metric tons of e-waste annually and would continue to be the highest e-waste producer with Gurgaon contributing to it in a major way.

With the increasing use of computers in households, purchase of mobile phones and television sets, e-waste in Delhi region, including Gurgaon, is going to go up phenomenally, the study says. The study has revealed that IT companies in Gurgaon dispose off about 40,000 computers every year while the country’s figure is 20 lakh computers annually.

Haryana is still to introduce e-waste policy in the state. Unregulated disposal of e-waste has resulted in groundwater contamination in Gurgaon. Haryana government on e-waste disposal, the BPOs and other IT companies are taking initiatives on their own.

GOVERNMENT POLICIES:

A comprehensive law that provides e-waste regulation and management and proper disposal of hazardous wastes is required. Such a law should empower the agency to control, supervise and regulate the relevant activities of government departments. Under this law, the agency concerned should collect basic information on the materials from manufacturers, processors and importers and to maintain an inventory of these materials. The information should include toxicity and potential harmful effects.

•        Identify potentially harmful substances and require the industry to test them for adverse health and environmental effects.

•        Control risks from manufacture, processing, distribution, use and disposal of electronic wastes.

•        Encourage beneficial reuse of e-waste and encouraging business activities that use waste. Set up programs so as to promote recycling among citizens and businesses.

•        Educate e-waste generators on reuse/recycling options

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 11 of 34 | Total 335 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 33 34   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Bitumen Emulsion - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Bitumen is defined as “A viscous liquid, or a solid, consisting essentially of hydrocarbons and their derivatives, which is soluble in trichloro-ethyelene and is substantially nonvolatile and softens gradually when heated. It is black or brown in colour & posseses waterproofing and adhesive properties. It is obtained by refinery processes from petroleum, and is also found as a natural deposit or as a component of naturally occurring asphalt, in which it is associated with mineral matte. Bitumen emulsion is one kind of speciality chemicals, which has large commercial uses as coating materials in the road construction and many other construction fields. It is also used as sealing material for the different type of laminated paper. Bitumen is available in the nature also and it is the byproduct of petroleum distillation plant or coal carbonization plant. Uses Most bituminous binders are used in the construction of roads. These are viscous semisolids at normal temperature. Therefore these require to be brought to a fluid state by heating, by dilution with solvent or by emulsifying before being applied in thin film. Use of emulsions facilities not only flows at atmospheric temperature but also application to damp road surfaces and wet aggregates. Bitumen emulsions are dispersions of very fine bitumen particles in an aqueous medium. They are easy to handle and find a wide application in road construction and maintenance; soil stabilization; grouting; tack coating; surface dressing;crack filling; seal coating; premixing; dust laying and in various other special circumstances where cold application of bitumen is desirable. The bitumen market was valued at USD 71.44 billion in 2013 and is likely to reach USD 93.38 billion by 2020, expanding at a CAGR of 3.9% during the forecast period from 2014 to 2020. In terms of volume, the global demand for bitumen stood at 108,348.9 kilo tons in 2013. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Art Infra Solutions Pvt. Ltd. • B G H Exim Pvt. Ltd. • Bitchem Asphalt Technologies Ltd. • Hemi Petro Products Ltd. • Hindustan Colas Ltd. • Indian Oil Corpn. Ltd. • Kochi Refineries Ltd. • Modern Road Makers Pvt. Ltd. • Ojas Technochem Products Ltd. • Stanpacks (India) Ltd. • Tinna Rubber & Infrastructure Ltd.
Plant capacity: 50 MT/DayPlant & machinery: Rs 143 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 372 Lakhs
Return: 28.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Condoms - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Control of fertility continues to be an important issue through the world even though the population growth rate has shown a steady decline in many countries, partly owing to the extensive use of condoms (male) or with use of oral contraceptives (female). Rubber condoms (male) are used by the majority of man today for enjoying the sexual intercourse. The function of the condoms it’s to collect the sperm created by the man during sexual intercourse. This condom prevents the sperm in penetrating into the female reproductory organ. The condoms or contraceptives (male) are usually made from natural rubber (latex). The rubber is used because of the unique physical properties which are Elasticity; Flexibility; Impermeable. The use of condoms or contraceptives results in steady decline in population of growth. In rural areas where peoples are illiterate & uneducated about sexual education did not utilized condoms or contraceptive. So the Government of India made a special programme to educate them about sexual education. The Government also made a special family planning programme for the rural areas. They generally advice the population or people of the rural areas to use condoms or other related things to check the greatly increasing population. In rural & urban areas the government sold condoms or contraceptive free of cost from and government dispensary & hospital. At present the country's total demand of condom is being fulfilled by total three manufacturing units. Hindustan Latex Ltd. of Kerala is Central public sector undertaking was set up in 1969 to manufacture Condoms. It is the largest manufacturer of Condoms in the country today and produces thinnest variety of Condoms in the world. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Cupid Ltd. • Famy Care Ltd. • H L L Lifecare Ltd. • J K Ansell Ltd. • London Rubber India Ltd. • Medtech Products Ltd. • Pashupati Seohung Ltd. • T T K Biomed Ltd. • T T K Healthcare Ltd. • T T K Protective Devices Ltd.
Plant capacity: 116,666.7 Pcs /DayPlant & machinery: Rs 139 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 400 Lakhs
Return: 25.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

Sweet & Scented Supari in Pouches - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Plant Layout

The betel nut (Supari) tree, which is known as "ARECA" in South India. It is planted in Bengal, Mysore, Sri Lanka etc. Its yield considered being very good in Sri Lanka. The betel (Piper betle) is the leaf of a vine belonging to the Piperaceae family, which includes pepper and kava. It is valued both as a mild stimulant and for its medicinal properties. Betel leaf is mostly consumed in Asia and elsewhere in the world by some Asian emigrants, as betel quid or in paan, with or without tobacco with adverse health effects. Betel is notable for staining the teeth of regular users. It is found in various places and its yield is different due to changed climate. Betel nut chewing has been practiced by natives in various countries since times. So keeping in mind its demand manufacturer utilising supari as a raw material for making various chewing material as Supari, Pan chapp gutaka, Pan Masala, Mayur brand sweet supari, scented supari etc. People chew it for stress reduction, feelings of well-being, and heightened awareness. It contains three major alkaloids: arecoline, pilocarpine, and muscarine. ? USES 1. It is used to refresh the mouth. 2. It freshens up mouth and breathes with its flavour. 3. It is chewed by all age group people. 4. It is served to guests after lunch and dinner to keep mouth fresh. 5. It helps in digestion of food after meals 6. It is served in marriages, parties or any other special occasions. 7. It is a direct substitute of pan, pan masala etc. 8. Widely used in religious and social functions. Cost Estimation Capacity • Sweet & Scented Supari (2 gms Size Pouches) : 83,333.3 Pouches /Day • Sweet & Scented Supari (5 gms Size Pouches): 33,333.3 Pouches / Day • Sweet & Scented Supari (10 gms Size Pouches): 16,666.7 Pouches / Day
Plant capacity: -Plant & machinery: Rs 9 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 192 Lakhs
Return: 27.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Paraffin Wax - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Paraffin wax is a white or colorless soft solid derivable from petroleum, coal or oil shale, that consists of a mixture of hydrocarbon molecules containing between twenty and forty carbon atoms. It is solid at room temperature and begins to melt above approximately 37°C (99°F); its boiling point is >370 °C (698 °F). Common applications for paraffin wax include lubrication, electrical insulation, and candles. It is distinct from kerosene, another petroleum product that is sometimes called paraffin. Paraffin wax from a solvent dewaxing operation is commonly known as slack wax, and the processes used for the production of waxes are aimed at de-oiling the slack wax (petroleum wax concentrate). Wax sweating was originally used to separate wax fractions with various melting points from the wax obtained from shale oils. Wax sweating is still used to some extent but is being replaced by the more convenient crystallization process. Chemically, paraffin wax is a mixture of saturated aliphatic hydrocarbons (with the general formula CnH2n+2).Wax is the residue extracted when lubricant oils are dewaxed and it has a crystalline structure with a carbon number greater than 12.The main characteristics of wax are (1) absence of color, (2) absence of odor, (3) translucence, and (4) a melting point above 45°C (113°F). Uses • Candle-making • Coatings for waxed paper or cloth • Food-grade paraffin wax: • Shiny coating used in candy-making; although edible, it is nondigestible, passing right through the body without being broken down • Coating for many kinds of hard cheese, like Edam cheese • Sealant for jars, cans, and bottles • Chewing gum additive • Anti-caking agent, moisture repellent, and dust binding coatings for fertilizers • Used in Forensic investigations Wax consumption has been projected to grow at an average annual rate of greater than 2 percent from 2010 to 2020. Waxes are used in a variety of products, including packaging, coatings, personal care products and of course, candles. Waxes can also be further processed into synthetic lubricants. Overall wax demands are largest for board sizing and candles . Combined these two products account for about 44 percent of the demand. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Chennai Petroleum Corpn. Ltd. • Mahalaxmi Dyes & Chemicals Ltd.
Plant capacity: Paraffin Wax:10 MT/Day •Micro Crystalline Wax (Bye Product):0.03 MT/Day •Foot Oil (Bye Product):2.51MT/Day Plant & machinery: Rs 270 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 922 Lakhs
Return: 27.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Contact Adhesive - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

An adhesive is any substance applied to the surfaces of materials that binds them together and resists separation. The term "adhesive" may be used interchangeably with glue, cement, mucilage, or paste. Adjectives may be used in conjunction with the word “adhesive” to describe properties based on the substance's physical or chemical form, the type of materials joined, or conditions under which it is applied. The use of adhesives offers many advantages over binding techniques such as sewing, mechanical fastening, thermal bonding, etc. These include the ability to bind different materials together, to distribute stress more efficiently across the joint, the cost effectiveness of an easily mechanized process, an improvement in aesthetic design, and increased design flexibility. Adhesives may be found naturally or produced synthetically. The earliest human use of adhesive-like substances was approximately 200,000 years ago. There is hardly any product in our surroundings that does not contain at least one adhesive – be it the label on a beverage bottle, protective coatings on automobiles or profiles on window frames. Applicators of different adhesives are designed according to the adhesive being used and the size of the area to which the adhesive will be applied. The adhesive is applied to either one or both of the materials being bonded. The pieces are aligned and pressure is added to aid in adhesion and rid the bond of air bubbles. Polychloroprene contact adhesives are used for bonding high-pressure laminates, automotive trim, roofing-membrane attachment, furniture, kitchen cabinets, custom display cabinets, interior and exterior panels, wall partitions, shoe soles, and many other applications where quick, high-strength, permanent bonds are needed. Thus, as an entrepreneur, contact adhesive production offers an exciting opportunity to you.
Plant capacity: Contact Adhesive: 160 Kgs/DayPlant & machinery: Rs 32 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 220 Lakhs
Return: 10.00%Break even: 64.00%
Add to Inquiry Add to Inquiry Basket

Mattress & Quilt - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

A mattress is a large pad for supporting the reclining body, used as or on a bed. Mattresses may consist of a quilted or similarly fastened case, usually of heavy cloth, that contains hair, straw, cotton, foam rubber, etc.; a framework of metal springs; or they may be inflatable. Mattresses are usually placed on top of a bed base which may be solid, as in the case of a platform bed, or elastic, e.g. with an upholstered wood and wire box spring or a slatted foundation. Flexible bed bases can prolong the life of the mattress. Popular in Europe, a divan incorporates both mattress and foundation in a single upholstered, footed unit. Divans have at least one innerspring layer as well as cushioning materials. They may be supplied with a secondary mattress and/or a removable "topper." A quilt is a type of blanket, traditionally composed of three layers of fiber: a woven cloth top, a layer of batting or wadding, and a woven back, combined using the technique of quilting. A quilt is distinguishable from other types of blanket because it is pieced together with several pieces of cloth. “Quilting” refers to the technique of joining at least two fabric layers by stitches or ties. In most cases, two fabric layers surround a middle layer of batting (cotton, polyester, silk, wool or combinations of fibers) which is a lighter, insulating layer. Batting is often referred to as “wadding” in Britain. Some modern quilts are made with an upper fabric layer, quilted to a layer of microfleece, perhaps without a fabric backing. The most decorative fabric surface is called the “top”, and is the design focus. A single piece of fabric (a “whole cloth quilt”) may be used as the top, or the top may be “pieced” from smaller fabric pieces. Sewing together smaller pieces of fabric into a larger patchwork "block" of fabric creates the basic unit. Few Indian Major Players are as under • Dunlop Comforts Pvt. Ltd. • Gandhigram Rubbers Ltd. • India Tyre & Rubber Co. (India) Ltd. • Kontak Comforts Pvt. Ltd. • M B I Intercorp Ltd. • M M Rubber Co. Ltd. • Oriental Veneer Products Ltd. • Southern Latex Ltd.
Plant capacity: Mattress 200 Nos/Day, Quilt:1000 Nos/DayPlant & machinery: Rs 63 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 364 Lakhs
Return: 28.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Cold Storage - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project

India is the largest producer of fruits and second largest producer of vegetables in the world. Fruits & vegetables, being perishable in nature require certain techniques of preservation for retaining the freshness intact and making them an acceptable item even after few days of ripening. It also facilitates the farmer to realize a better price instead of selling the product at a throw away price due to the perishability. This necessity as evolved a new concept of storing these items at below or just above sub-zero temperatures known as cold storage. Introduction of Cold storage / Cold room facility will help them in removing the risk of distress sale and simultaneously will ensure better returns. The annual production of fruits and vegetables in the country accounts for 18 to 20% of our agriculture output. Varied agro climatic conditions and better availability of scientific package of practices, there is a vast scope for increasing the production. Cold Storage is a special kind of room, the temperature of which is kept very low with the help of machines and precision instruments. India is having a unique geographical position and a wide range of soil, thus producing variety of fruits and vegetables like apples, grapes, oranges, potatoes, chillies, ginger, etc. Marine products are also being produced in large quantities due to large coastal areas. As per 2008-09 figures, India produces around 215 Million Tons of Fruits and Vegetables, 3 Billion Tons of Marine Products, 109 Million Tons of Milk, 56 Billion Eggs and 38 Million Tons of Meat per annum. Commercially apples, potatoes, oranges, etc are stored on large scale in the cold storages. Other important costly raw materials like dry fruits, chemicals, essences and processed foods like fruit juice/pulp, concentrate dairy products, frozen meat, fish and eggs are also stored in cold storages to regulate marketing channels of these products. Therefore, it is a good project for entrepreneurs to invest. Uses Cold storage is used to preserve fruits and vegetables. Once they are kept in the cold storage, they do not get spoiled even after many months. Sometimes, in production season of certain vegetable or fruit crops, the demand for those thing decreases, which in turn decreases the consumption in surplus amount of that particular item and it is kept in a cold storage. Few Indian Major Players are as under • Allana Cold Storage Ltd. • Anjaneya Cold Storage Ltd. • Asvini Fisheries Pvt. Ltd. • H M G Industries Ltd. • Hindusthan Ice & Cold Storage Co. Ltd. • Ideal Ice & Cold Storage Co. Ltd. • Indagro Foods Ltd. • Jindal Steel & Alloys Ltd. • Karnavati Cold Storage Ltd. • Karnimata Cold Storage Ltd. • Kisan Cold Storage & Refrigeration Service Ltd. • Mohan Meakin Ltd. • Nav Bharat Refrigeration & Inds. Ltd. • Prabhu Hira Ice & Cold Storage Ltd. • Ram'S Assorted Cold Storage Ltd. • Sri Vatsa Hotels Ltd. • Universal Cold Storage Pvt. Ltd. • Uptown Trading & Investments Ltd.
Plant capacity: 3000 MTPlant & machinery: Rs 266 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 882 Lakhs
Return: 26.00%Break even: 43.00%
Add to Inquiry Add to Inquiry Basket

PVC Wire & Cables - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The generation, transmission, and distribution of power involve electrical facilities, apparatus, and components, to carry the electrical energy from its generating site to where it is utilized. An important part of this power system is the cable system that is used exclusively to carry power from the main substations to secondary substations at load centers. Low-voltage cable is used to distribute power from the load centers to utilization equipment in conduits and ducts, even though other methods such as cable trays, direct burial for outdoor applications, and aerial cable are used. Electrical, mechanical, and environmental considerations are the main factors in selecting and applying cable systems for distribution and utilization of electrical power. Cables are the source of carrying power and signal in power plants, refineries, process industries. Cable network can carry fire from one place to another in the event of fire caused due to external sources or due to short circuit. Power cable industry in India is eyeing an estimated Rs 50 bn market to unfold. About 78,000 MW of power generation capacity and 60,000 circuit km of transmission network are projected to be added by 2012 according to the Eleventh Five Year Plan. Capex required for every MW of power generating capacity is about Rs 40 mn. Expenditure required in the Eleventh Five Year Plan for power generation has been estimated at Rs 270 bn. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Bindawala Cables & Conductors Ltd. • Gem Cables & Conductors Ltd. • I L A C Ltd. • Industrial Cables (India) Ltd. • Omega Cables Ltd. • Opal Industries Ltd. • Sanco Industries Ltd. • Skytone Electricals (India) Ltd. • Torrent Cables Ltd. • Universal Cables Ltd. • Vimal Flexsol Ltd.
Plant capacity: Single Core Wires (THHN/THWN) 60 KM/Day,Single Core Stranded (CU/PVC)45 KM/Day,Multiple-Core Flexible-Wire (Sheathed)21 KM/DayPlant & machinery: Rs 55 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 189 Lakhs
Return: 31.00%Break even: 71.00%
Add to Inquiry Add to Inquiry Basket

SCHOOL (CBSE Pattern) - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project

Education is today identified among basic needs, as essential for an individual’s survival as ‘food, clothing and shelter.’ The need for education has been recognized in all parts of the country and among all sections of society. Education brings success and success translates into social recognition. Though we have developed well in higher education system, a limited infrastructure facility is there in most of the educational institutions. Opening school in India is a herculean task, however more and more people are entering in school business; for the demand for school appears unending in India. The promising business opportunity can be discovered in the light of absence of quality school, growing population, and increasing desire to provide quality education to one’s children. A school is an unique business as it cannot be even termed a business. Schools cannot be set up by private entities. They have to be run by a society formed under the Societies Act of 1860, or a trust under Public Trust Act as existent in different states, or by forming a company under Section 25 of the Companies Act 1956.
Plant capacity: Total Students: 750 StudentsPlant & machinery: Rs 20 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 408 Lakhs
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Medical College with Hospital - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project

A medical college is meant to impart education of medical field to students to qualify them as doctors in different specialized disciplines so as to treat patients suffering from various ailments. Doctors with their dedicated spirit serve the nation at large by providing medication and treatment for eradication of diseases, which exchange health and add suffering to humanity. Normally a medical college is associated with a hospital. Hospitals provide the facilities of O.P.D. and admission for seriously ill seriously injured, seriously burnt and pregnant ladies, causalities etc. Presently, every city or town in India has no. of private hospitals furnished with latest medical facilities available and with more qualified surgeons, physicians and specialist doctors. Even sometimes, they are furnished with more modern machines than those available in the nearby Government Hospital. These hospitals can be seen well crowded as they provide very good service at a smile. As they are run by privates very good medical care is provided by them. A private hospital is a place where one may get treatment from ordinary fever to a major surgery operation. As a matter of fact, no limitation has been made for the facilities available in a hospital. However, generally all private hospitals are provided with latest facilities and ultra modern machines. In a hospital, surgeons, physicians, E.N.T., specialists, children specialist, Eye-surgeon, psychologists and sex-specialist are essential.
Plant capacity: Total Students per Annum:150 Students Admitted/Annum 700 Beded HospitalPlant & machinery: Rs 2047 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 31862 Lakhs
Return: 1.00%Break even: 36.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 11 of 34 | Total 335 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 33 34   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.

NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search


Search Project Report & Profiles





Subjects