Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 31 of 37 | Total 361 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 31 36 37   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Production Unit of Liquid Washing Soap, Perfumed Bleach for the Wash of White Cloths, Toilet/Tills Hard Stains Remover Liquid , Detergent Powder - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research

Laundry detergent, or washing powder, is a type of detergent (cleaning agent) that is added for cleaning laundry. In common usage, "detergent" refers to mixtures of chemical compounds including alkylbenzenesulfonates, which are similar to soap but are less affected by hard water. In most household contexts, the term detergent refers to laundry detergent vs hand soap or other types of cleaning agents. While detergent is still sold in powdered form, liquid detergents have been taking major market shares in many countries since their introduction in the 1960s. Bleach is a chemical compound derived from natural sources used to whiten fabrics. Bleach works by the process of oxidation or the alteration of a compound by the introduction of oxygen molecules. A stain is essentially a chemical compound, and the addition of bleach breaks down the molecules into smaller elements so that it separates from the fabric. Detergent and the agitation of the washing machine speed up the cleaning process. The disinfecting properties of bleach work in the same manner—germs are broken down and rendered harmless by the introduction of oxygen. In industry, different forms of bleach are used to whiten materials such as paper and wood, though most bleach is used to launder textiles. Bleach aids detergents in the removal of soil and stains. There are two types of bleach commonly used in home laundry: chlorine bleach or sodium hypochlorite and oxygen bleach. Through a process of oxidation, bleach changes the soil into soluble particles to be washed away by detergents in the washing process. Bleach helps to whiten and brighten washable fabrics and some bleach disinfects fabrics by killing bacteria. Stain removal is the process of removing a mark or spot left by one substance on a specific surface like a fabric. A solvent or detergent is generally used to conduct stain removal and many of these are available over the counter. Cleaning compositions that effectively disinfect and clean hard surfaces such as those in lavatories and bathrooms, particularly toilet bowls, are well known. Typical cleaning compositions provide effective coverage of the treated surfaces to ensure that contact between the cleaning composition and contaminants present on the surface occur. Ineffective disinfection and cleaning of the surface often is the end result without such contact, particularly for inner toilet bowl surfaces. For pitched toilet bowl surfaces, viscous cleaning compositions can provide good coverage and retention, particularly vertically sloped interior surfaces of a toilet bowl. Therefore, it is a good project for entrepreneurs to invest
Plant capacity: Detergent Powder:3.2 MT/day•Liquid Washing Soap:3.2 MT/day •Toilet Cleaner:3.2 MT/day •Perfumed Bleach: 3.2 MT/day •Stain Remover Liquid:3.2 MT/dayPlant & machinery: Rs 72 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 210 Lakhs
Return: 28.00%Break even: 74.00%
Add to Inquiry Add to Inquiry Basket

Maltodextrin - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Maltodextrin is a mixture of glucose, maltose, oligosaccharides and polysaccharides. Maltodextrin is 15 to 20% dextrose equivalent and is produced by enzymatic hydrolysis of starch, followed by refining and spray-drying to moisture level of 3% to 5%. Maltodextrin is an artificial sugar (also known as a polysaccharide) that has a mild, sweet taste. It's usually created from corn and wheat but can also made from rice, potatoes and tapioca. While it's a commonly used food additive found in many types of packaged foods including seasonings, cake mixes and potato chips, the health effects of maltodextrin depend on the type and amount you consume. One type of maltodextrin is a simple carbohydrate. It contains calories and is used in supplements designed to provide a boost of energy. The second type resistant maltodextrin comes from the same source, but it goes through additional processing to make it indigestible. Resistant maltodextrin doesn’t provide energy, but it does deliver benefits similar to soluble fiber. The term maltodextrin applies to any starch hydrolysis product containing less than 20 glucose units, and, for this reason, maltodextrin refers to a family of products instead of a specific product. Applications Maltodextrin is a white powder often used in processed foods as a thickener or a filler since it is fairly inexpensive, as well as in pharmaceuticals as a binding agent. It is found in canned fruits, snacks, cereal, desserts, instant pudding, sauces, and salad dressings, spice mixes, soups and sauces, baked goods, yogurt, nutrition bars, sugar-free sweeteners and meal replacement shakes. Since it contains fewer calories than sugar, it's also found in sugar substitutes . Maltodextrin is used in coffee whiteners, imitation sour creams, imitation cheeses and whipped toppings. It is perfect for candy coating and soft-centre candies, for frosting and glazing, for nut and snack coating, in lozenges and for binding, plasticising and crystal inhibition. In hard candies, it improves the hygroscopic characteristics. Maltodextrin is usually used in such small amounts that it doesn't have a significant impact in terms of the amount of protein, fat, carbohydrate, or fiber that it adds to foods. It is easy and cheap to produce making it very appealing to food manufacturers. Indian demand and supply Maltodextrin is the least hygroscopic of all corn sweeteners due to its low dextrose equivalent (DE) i.e. low sugar content and exhibits high viscosity and contribute to the mouth feel and body due to presence of higher molecular weight saccharides. As a multi functional food additive, maltodextrin is used in food industry such as sweets, drink, beer, ice cream, preserved fruit, milk powder, malted milk, cake, biscuit and bread, as well as in medicine. Maltodextrin is the perfect instant food additive due to its free flexibility open structure, dispersibility in cold water, its ability to help maintain clarity and eye-appeal. Maltodextrin increases the viscosity and prevents caking and crystallisation in the frozen foods such as ice cream. Maltodextrin is a more expensive product but the quantity needed is much less than of ordinary glucose. It can be used in products which require increased nutritive bulk without substantially affecting the flavour of sweetness balance. Maltodextrin is used particularly for production of spray dried infant food product. Indian producers include the following: • Gujarat Ambuja Exports Ltd., Gujarat • Prathista Biotech,Andhra Pradesh • Riddhi Siddhi Starch & Chemicals Ltd.,Karnataka & Gujarat • Sahyadri Starch & Industries P Ltd.,Maharashtra • Santosh Starch, Gujarat and Tamil Nadu • Sukhjit Starch & Chemicals Ltd., Punjab Maltodextrin has gained acceptance in the food manufacturing industry owing to its easy miscibility, temperature tolerance, and bland taste. It can be formulated in any food, ranging from soup & sauces to sports drinks. Major drivers fuelling the growth are growing baby food and infant formula market. Infant food formula utilizes substantial amount of maltodextrin as it is easily digestible by kids. In addition, sports nutrition and meal replacement shakes that uses maltodextrin in large quantities are potential categories of maltodextrin application.. Maltodextrin demand is on rise due to robust market for food, pharmaceutical and cosmetic encapsulation sector that uses maltodextrin as a cell wall material for encapsulation of flavours, colours and pharmaceutical molecules. The present Indian demand for maltodextrin is much below the potential level. With the increasing economic growth and per capita consumption and higher consumer expectation, the demand for confectionery products and infant food sector would steadily increase in the coming years. Such growth would translate into steady increase in demand for maltodextrin in the country.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Iron oxide - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Iron oxide and oxide-hydroxide are widespread in nature, play an important role in many geological and biological processes, and are widely utilized by humans, e.g., as iron ores, pigments and catalysts in thermite. Common rust is a form of iron (III) oxide. Iron oxides are widely used as inexpensive, durable, pigments in paints, coatings and colored concretes. Colours commonly available are in the “earthy” end of the yellow/orange/red/brown/black range. Iron oxides are produced from ferrous sulfate by heat soaking, removal of water, decomposition, washing, filtration, drying and grinding. Chemical formula: Fe2O3. Appearance: Powder of size around 40 micron. Iron (III) oxide or ferric oxide is an inorganic compound with the formula Fe2O3. It is one of the three main oxides of iron. As the mineral known as hematite, Fe2O3 is the main source of the iron for the steel industry. Fe2O3 is ferromagnetic, dark red, and readily attacked by acids. Iron (III) oxide is often called rust. To some extent this label is useful, because rust shares several properties and has a similar composition. To chemists, rust is considered an ill-defined material, described as hydrated ferric oxide The overwhelming application of Iron (III) oxide is as the feedstock of the steel and iron industries, e.g. the production of iron, steel, and many alloys. Black iron oxide has the highest tint strength, generally achieving saturation at 6 percent dosage. Brown has a slightly lower tint strength, levelling -off at approximately 7 percent dosage, followed by 8 percent for red and 9 percent for yellow. The difference in colour/shade between one pigment and another is due to the surface structure of the particle. Pigments of the same family, such as reds for example, could have different undertone. Upon dilution with a white extender, reds may appear purple or pink. The reason for this is that a red pigment particle, depending on its structure, may reflect the red component of light plus a certain amount of blue (purple undertone) or some yellow (pink undertone). They are produced in either anhydrous or hydrated forms. Their range of hues includes yellows, reds, browns and blacks. The food-quality iron oxides are primarily distinguished from technical grades by their comparatively low levels of contamination by other metals; this is achieved by the selection and control of the source of the iron or by the extent of chemical purification during the manufacturing process. Applications Iron Oxide is a very fine powder of ferric oxide known as “jewellers rouge”, “red rouge”, or simply “rouge”. It is used to put the final polish on metallic jewellery and lenses, and historically as a cosmetic. Rouge is sold as a powder, paste, laced on polishing cloths or solid bar (with a wax or grease binder). Iron(III) oxide is also used as a pigment in cosmetics. Additionally, Iron oxides are used as pigments in dental composites alongside titanium oxides. Iron Oxide pigments are also used in paints and coatings; colour concentrates; and mulch. Iron oxide dispersant is one of many solutions used to purify water in water treatment facilities. It is considered to be a superior phosphate and zinc stabilizer stressed cooling water systems and an excellent iron and sludge dispersant in boilers. Compact pigment : Whereas inorganic binders do not disperse to 100% during the usual mixing times allowed, those prepared with organic wetting and deflocculating agents achieve excellent dispersion and hence provide high tinting strength in concrete products. Bayer developed compacted pigments which also incorporate organic dispersing agents. In making them, a pigment paste is pre-shaped (by the use of perforated rollers or matrices) and the prepared particles are rounded subsequently in granulation drums or on granulation plates. Comparison of natural iron oxide and synthetic iron oxide pigment The use of natural iron oxide pigment dates back centuries to prehistoric times and can be seen in cave paintings around the world. However, natural iron oxide pigments are nearly overshadowed by the synthetic variety, due to its consistency and superior tailor made properties. Synthetically prepared iron oxide pigment has been found to possess better texture, brilliance and staining power compared to natural pigment. When the colour of the paint is important, synthetic iron oxides are predominantly used because they have greater tinting strength than natural oxides. But in primers or undercoats, which are not so colour dependent as the finishing paints, natural iron oxide pigments may be used. Ceramics may also use natural oxides to provide colour for frits and glazes. Iron oxide pigment can be either produced in synthetic process or refined from naturally occurring ore deposits. A number of different processes have been developed for manufacturing synthetic iron oxide pigments. Important actually used production methods are as follows: • Laux process • Calcination process • Penniman process • Precipitation process Demand driver Iron oxide pigments are used in the coatings and colorants, construction, plastics and toner industries. The demand for iron oxide pigment would be mainly driven by the performance and growth of the paint and coating industry and polymer master batch sector. ? For more details: NIIR PROJECT CONSULTANCY SERVICES offers consultancy on various industrial and profitable projects with complete details of pre-feasibility, market survey, capital requirement, rate of return and breakeven point. The detailed project profile reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. For more details send us your inquiry on [email protected]
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Petroleum Jelly - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Petroleum jelly or petrolatum was discovered as a paraffin-like material coating oil rigs. Since then, it has been used in various ointments and as a lubricant. Petroleum jelly is mixture of mineral waxes and oils that together lock moisture in skin, moisturizing it to repair and relieve dryness. They are stabilized in such fashion that the oil appears to form the internal phase, whereas the wax compound forms the external phase. Petroleum jelly is made by the waxy petroleum material that formed on oil rigs and distilling it. The lighter and thinner oil-based products make up petroleum jelly, also known as white petrolatum or simply as petrolatum. Robert Chesebrough is the chemist who devised and patented this process. Basically, the crude material undergoes vacuum distillation. The still residue is then filtered through bone char to yield petroleum jelly. At room temperature, petroleum jelly is an odourless semi-solid which consists of a mixture of hydrocarbons. Petroleum jelly has fibrous or grease like structure and also possess discreet drop point and penetration value . Petroleum jelly may be considered as microcrystalline wax which has absorbed the oil, resulting in an amorphous jelly like mass. It is mostly available in two colours namely white and yellow. Petroleum jelly is hugely versatile, and it’s used all over the world to protect and heal dry skin, from dry, cracked hands to hard skin on heels, as well as for beauty purposes, like softening the lips or highlighting the cheekbones. Application sector Petroleum jelly is an ingredient in many cosmetics and lotions. Originally it was marketed as a burn ointment. Petroleum jelly also may be applied to dry or chapped skin to seal in moisture. A variation known as red veterinary petroleum confers some protection against UV (ultraviolet) exposure and has been used as a sunscreen. • Pharmaceuticals/ Cosmetics industry • Jelly filled cable • Leather industry • Rubber industry • Other miscellaneous application including rust prevention etc. Petroleum jelly white / yellow IP uses are as follows: • Skin ointment / Skin cream • Hair Vaseline • Pain balm • Cold cream and cosmetic preparations • Ophthalmic ointment • Vaporub Ointment Indian demand: Various Cosmetics and pharmaceuticals are used by the large number of people in general for wounds, cuts, burns, skin diseases. In today’s business word, more and cosmetics industries are coming up and thereby increasing the demand for the raw materials like petroleum jelly. Hence it can be assumed that the petroleum jelly is having very good market potential in view of development of cosmetic & pharmaceutical industry in India. Present demand for petroleum jelly including export demand is around 70000 metric tonne per annum Growth rate in demand for 2021: 7% per annum Indian producers include the following: • Eastern Petroleum (P) Ltd., Maharashtra • Mahatha Petroleum (P) Ltd., Tamilnadu • Panama Petrochem Gujarat • Gandhar Oil Refinery Maharashtra • Asian Oil Company Maharashtra • Bhakti Petrochem P Ltd., Maharashtra • Unicorn Petroleum Inds P Ltd., Maharashtra • Kim Chemicals Ltd , Maharashtra Global petroleum jelly market Global supplies of microcrystalline wax and petroleum jelly continue to shrink due to the reduction in API Group I and specifically base oil Group I production capacity. On the other hand, demand for microcrystalline wax and petroleum jelly continues to be strong, helped by the recovery in many parts of the world. The resultant rise in prices has motivated wax de oilers, blenders, specialty wax producers to seek alternatives. The interplay of supply and demand drivers and the penetration of alternate materials will set the future direction of this product market. While natural and organic products account for a small percentage of the total skin care market, their share is growing faster than the general market.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

PE Wax Emulsion - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Waxes are among the oldest worked materials used by humans. Their value as versatile construction materials ("man's first plastic") was discovered very early. Today, waxes are used mostly as additives and active substances. The use of waxes is expected to increase in the future because of their generally favourable toxicological and ecological properties. The word "wax" usually refers to a variety of organic substances that are solid at ambient temperature but become free-flowing liquids at slightly higher temperatures. The chemical composition of waxes is complex, but normal alkanes are always present in high proportion and molecular weight profiles tend to be wide. The main commercial source of wax is crude oil but not all crude oil refiners produce wax. "Mineral" wax can also be produced from lignite. Plants, animals and even insects produce materials sold in commerce as "wax." Wax emulsions are now well established and extensively used in aqueous formulations such as coatings, inks and OPVs, textile and leather treatments, polishes, paper and cardboard coatings, etc. These ready-to-use emulsions can be easily incorporated by simple mixing. Their very fine particle size ensures an intimate and homogeneous incorporation within other ingredients of the formulation, maximizing the required effect(s). Wax emulsions can be stabilized by either a steric mechanism (using with non-ionic emulsifiers) or by an electrostatic mechanism (using ionic emulsifiers, most often anionics). Combining anionic and non-ionic emulsifiers gives the emulsion an optimum stability because wax particles are protected through both stabilization mechanisms referred to as the electro-steric stabilization mechanism. In addition to giving more flexibility in formulating, each stabilization mechanism has not only its own advantages and disadvantages but also significantly impacts on the overall formulation. Polyethylene wax is used in many applications to improve processing and end product properties. It is widely used in plastic, rubber and electrical industry, up to in ink, paint, detergent and chemical engineering industry, wax becomes more important product then ever in general industrial field as raw material additive improving its efficiency. As a whole it is a good project for new entrepreneurs to invest.
Plant capacity: 20 MT/DayPlant & machinery: Rs 97 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 343 Lakhs
Return: 26.90%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Flavoured Nuts - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

The cashew nut is served as a snack or used in recipes, like other nuts, although it is actually a seed. The cashew apple is a fruit, whose pulp can be processed into a sweet, astringent fruit drink or distilled into liquor. The shell of the cashew nut yields derivatives that can be used in many applications from lubricants to paints, and other parts of the tree have traditionally been used for snake-bites and other folk remedies. Originally native to northeastern Brazil, the tree is now widely grown in tropical regions, India and Nigeria being major producers, in addition to Vietnam, the Ivory Coast, and Indonesia. Cashew nuts are commonly used in Indian cuisine, whole for garnishing sweets or curries, or ground into a paste that forms a base of sauces for curries (e.g., korma), or some sweets (e.g., kaju barfi). It is also used in powdered form in the preparation of several Indian sweets and desserts. In Goan cuisine, both roasted and raw kernels are used whole for making curries and sweets. Features of Flavoured Cashew Nuts : Longer shelf life ; Good for health ; Delicious taste Few Indian Major Players are as under • Goa Agricommerz Ltd. • Goa Forest Development Corpn. Ltd. • Kerala State Cashew Devp. Corpn. Ltd. • Kisan Cold Storage & Refrigeration Service Ltd. • M A C Agro Inds. Ltd. • M P S Food Products Ltd. • Mac Industries Ltd. • Mangalya Trading & Investments Ltd. • Moolchand Exports Ltd. • Olam Enterprises India Pvt. Ltd. • Olam Exports (India) Ltd. • Orissa State Cashew Devp. Corpn. Ltd. • P J S Overseas Ltd. • Padmavathi Cashews & Coffee Ltd. • Pioneer Cashew Inds. Ltd. • State Farming Corpn. Of Kerala Ltd. • Tamilnadu Forest Plantation Corpn. Ltd. • Tropical Foods Ltd. • West Bengal Forest Devp. Corpn. Ltd.
Plant capacity: Flavoured Cashew Nut:500 kgs/Day •Flavoured Peanut:500 kgs/DayPlant & machinery: Rs 117 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 215 Lakhs
Return: 29.46%Break even: 57.66%
Add to Inquiry Add to Inquiry Basket

Ductile Iron Pipe Fittings for Water & Sewage with Lost Foam Casting Process - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Cost of Project

Casting other than a pipe, which allows pipeline deviation, change of direction or bore. In addition flanged-sockets, flanged-spigots and collars are also classified as fittings. Iron or steel pipes and tubes are used in a variety of industries. Different types of pipe fittings are used to connect different types of pipe. The type of fitting used will depend on the type of service the pipe being connected must perform. Pipe fittings basically include the range of components that are used to connect pipe ends for in-line, multi-port, offset and mounting configurations. Pipe fitting cross sections are mostly, but not always, circular in shape to match with the pipe section with which they are connected. Pipes can be metallic or plastic and pipe fittings vary depending on the type of pipe used. Pipe fittings are used for various purposes. They can be used to extend or terminate pipe runs, change a pipe's direction, to connect two or more pipes and to change the pipe size.Types of D.I. Pipe : Pipe Adopter , Pipe Elbow, Pipe Coupling, Pipe Union, Pipe Reducer, Pipe Tee . Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Ashutosh Castings Ltd. • Birla Accucast Ltd. • Carnation Industries Ltd. • Chetan Foundries Ltd. • Dee Dee Steel Castings Ltd. • Electrosteel Castings Ltd. • Electrosteel Steels Ltd. • Electrotherm (India) Ltd. • Govind Steel Co. Ltd. • Hindusthan Malleable & Forgings Ltd. • I C L Foundries Ltd. • Indu Engineering & Textiles Ltd. • J K M Ferrotech Ltd. • Jai Balaji Steels (Purulia) Ltd. • Jindal Saw Ltd. • Nelcast Ltd. • Porwal Auto Components Ltd. • Sathavahana Ispat Ltd. • United Foundries Pvt. Ltd. • Yashwant Iron & Steel Works Ltd.
Plant capacity: Pipe Adopter:2 MT/Day •Pipe Elbow :2 MT/Day •Pipe Flange :2 MT/Day •Pipe Union : 2 MT/Day •Pipe Reducer : 2 MT/Day •Pipe Tee:2 MT/DayPlant & machinery: Rs 254 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 946 Lakhs
Return: 26.67%Break even: 60.85%
Add to Inquiry Add to Inquiry Basket

Plastic Optical Lenses - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Optical Lenses are optical components designed to focus or diverge light. Optical Lenses, which may consist of a single or multiple elements, are used in a wide variety of applications from microscopy to laser processing. Many industries utilize Optical Lenses, including life sciences, imaging, industrial, or defense. As light passes through a lens, it is affected by the lens’ profile or substrate. A Plano-Convex (PCX) or Double-Convex (DCX) lens causes light to focus to a point, while a Plano-Concave (PCV) or Double-Concave (DCV) lens causes the light traveling through the lens to diverge. Achromatic Lenses are ideal for applications requiring color correction, while Aspheric Lenses are designed to correct spherical aberration. Germanium (Ge), Silicon (Si), or Zinc Selenide (ZnSe) lenses are ideal for transmitting the Infrared (IR) spectrum, while Fused Silica is well suited for the Ultraviolet (UV). A lens is a transmissive optical device that affects the focus of a light beam through refraction. A simple lens consists of a single piece of material, while a compound lens consists of several simple lenses (elements), usually along a common axis. Lenses are made from transparent materials such as glass, ground and polished to a desired shape. A lens can focus light to form an image, unlike a prism, which refracts light without focusing. Devices that similarly refract radiation other than visible light are also called lenses, such as microwave lenses or acoustic lenses. Most lenses are spherical lenses: their two surfaces are parts of the surfaces of spheres. Each surface can be convex (bulging outwards from the lens), concave (depressed into the lens), or planar (flat). The line joining the centres of the spheres making up the lens surfaces is called the axis of the lens. Typically the lens axis passes through the physical centre of the lens, because of the way they are manufactured. Lenses may be cut or ground after manufacturing to give them a different shape or size. The lens axis may then not pass through the physical centre of the lens. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Bausch & Lomb Eyecare (India) Pvt. Ltd. • G K B Ophthalmics Ltd. • G K B Vision Ltd. • Indo-American Optics Ltd. • Prime Ophthalmic Products Pvt. Ltd. • Techtran Ophthalmics Pvt. Ltd. • Techtran Polylenses Ltd.
Plant capacity: 60,000 Pairs/DayPlant & machinery: Rs 1026 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 2211 Lakhs
Return: 26.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Coir Geotextiles - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Coir as a natural organic product is organically biodegradable. The Fiber is hard and strong and decomposes slowly, making it perfectly suited for use in Geotextiles. Coir Geotextiles provide good support on slopes for about five years and there is no need for post-installation work. Coir Geotextiles is developed by the Coir Board of India. The world has today accepted Coir Geotextiles and acknowledges its effectiveness. Coir Geotextiles, used in many kinds of applications like Slope Stabilisation, Controlling Soil Erosion, Road and Rail Embarkments, River Embarkments, Landscape Areas etc., Coir geotextiles with its Indianised connotation "Coir Bhoovastra", a generic member of the geosynthetic family, are made from the coconut fibre extracted from the husk of the coconut fruit as explained in the following section. Like their polymeric counter parts, coir geotextiles can be synthesised for specific applications in geotechnical engineering practice. Coir geotextiles is not a consumer product, but a technology based product. A range of different mesh matting is available, meeting varying requirements. Coir fibres can be converted into fabric both by woven and non-woven process. Coir mesh matting of different mesh sizes is the most established coir geotextiles. Mesh matting having different specifications is available under quality code numbers H2Ml to H2MIO. These qualities represent coir geotextiles of different mesh sizes ranging from 3.175mm to 25.4mm. Several types of non-woven geotextiles also exist. Most of the non-woven mats are made from loose fibres, which are interlocked by needling or rubberising. Non-woven geotextiles are available in several dimensions and have a minimum thickness of 2mm. Coir geotextiles can be used to stabilize the soil temporarily when construction roads or banks. Coir geotextiles are being used as a separation cum drainage layer in the road. It is also intended to serve as a reinforcement material in the beginning of the project. Geo-synthetics are widely used in the construction of road all over the world, whereas use of coir geotextiles is very limited in such construction. Few Indian Major Players are as under • Amco Industries Ltd. • Amichand Textiles Ltd. • Aspinwall & Co. (Travancore) Ltd. • Delight Handicrafts Palace Ltd. • Dunlop Comforts Pvt. Ltd. • Duroflex Pvt. Ltd. • Eco Wood Ltd. • Karnataka Consumer Products Ltd. • Karnataka State Coir Devp. Corpn. Ltd. • Kerala State Coir Corpn. Ltd. • Kontak Comforts Pvt. Ltd. • Kozylon Coir Products Ltd. • Wires & Fabriks (S.A.) Ltd.
Plant capacity: 6.5 MT/DayPlant & machinery: Rs 654 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 1149 Lakhs
Return: 25.93%Break even: 50.48%
Add to Inquiry Add to Inquiry Basket

Toothbrush - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

A toothbrush is a dental instrument used for cleaning teeth, ideally in conjunction with toothpaste or mouthwash. The toothbrush consists of a plastic handle and nylon bristles attached to the head of the brush. Toothbrush occupies a prominent and very important place among the dentifice available today. Toothbrushes are getting more complex and sophisticated every year. New geometries, material combinations and additional functions are the only way to set off from the competition. Today’s consumer expects a dental care system which offers a multitude of preventive dental care measures such as interdental space cleaning, plaque and tartar removal. Due to the increasing awareness and importance of dental hygiene, the use of tooth paste was confined to the upper and upper middle classes of urban society, but with increasing awareness the use of Toothbrush has become well established in even rural house hold. Toothbrush being consumer product and its market being quite competitive and also acceptable. For keeping good health, care of teeth is one of the essential step. The particle of food that sticks to our teeth give birth to fouling smell and many dreadful diseases, which destroy the gums and results in tooth decay. A man, who do not have teeth in his mouth, only know as how important are these. A man having fouling smell coming out from his mouth cannot even get the close company of his companion, and if someone has got a dental diseases, one can blame only one's carelessness in the past. Fortunately people have become conscious of Toothbrushing. Any entrepreneur venture into this field will be successful Few Indian Major Players are as under • Ajay Home Products Ltd. • Anchor Health & Beauty Care Pvt. Ltd. • Andhra Pradesh State Civil Supplies Corpn. Ltd. • Aryan Brush & Estate Developers Ltd. • Camelot Investments Co. Pvt. Ltd. • Colgate-Palmolive (India) Ltd. • Contemporary Targett Ltd. • Dr. Fresh Assets Ltd. (1990) • Gillette India Ltd. • Sinhal Metal Inds. Ltd. • Trim Plastics Ltd. • W H Targett India Ltd. • Warren Pharmaceuticals Ltd.
Plant capacity: 15,000 Nos/DayPlant & machinery: Rs 178 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 316 Lakhs
Return: 26.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 31 of 37 | Total 361 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 31 36 37   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.

NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search


Search Project Report & Profiles





Subjects