Home » Profiles » High Tensile Wire Used In Prestressed Concrete Poles And Railway Sleepers - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

High Tensile Wire Used In Prestressed Concrete Poles And Railway Sleepers - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

High tensile wires are those which can withstand great strain without breaking or becoming deformed. High tensile wire is made with higher carbon steel. The increased carbon content increases the wire’s strength and elongation. As the carbon percentage content rises, steel has the ability to become harder and stronger through heat treating; however, it becomes less ductile. Regardless of the heat treatment, a higher carbon content reduces weldability. In carbon steels wire, the higher carbon content lowers the melting point. It has high strength, adequate ductility, Bendability, which is required at the harping points and near the anchorage, low relaxation to reduce losses and minimum corrosion. High tensile wire for pre-stresses in concrete structure by virtue of improved proportional limit, higher ductility combines with higher strengths. High Tensile Wires are used in Pre-stressed Concrete Industry, large bridges, Flyovers, Ports and Road Dividers. High tensile wire improves the bond strength between pre-stressed steel wire and concrete. Reduces the frictional losses between pre-stressed wire and concrete and increases the anchorage efficiency. Under the dispensations of the government's Industrial Policy of the post-liberalisation era, four steps changed the direction of the steel industry in India. These were (i) freedom to set up integrated steel plants in the private sector; (ii) placing imports of steel under OGL (open general licence); (iii) reduction of import duties on both steel and scrap; and (iv) decontrol of domestic prices. As a result, India has come to enjoy a cost advantage compared to most countries. The domestic demand is based on the per capita consumption in the urban sector increasing from 77 kg to 165 kg in 2019-20 at an annual growth of 5%. As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Aditya Ispat Ltd. • Bedmutha Industries Ltd. • Bindawala Cables & Conductors Ltd. • Calcast Ferrous Ltd. • D & H India Ltd. • Himachal Tubes & Wires Ltd. • Radiant Wires Ltd. • Rakan Steels Ltd. • S K M Steels Ltd. • Sail Bansal Service Centre Ltd. • Utkarsh Tubes & Pipes Ltd. • VandanaUdyog Ltd.
Plant capacity: 60 MT/dayPlant & machinery: 224 lakhs
Working capital: -T.C.I: Cost of Project : 958 lakhs
Return: 27.00%Break even: 58.00%
Email Us | Add to Inquiry Add to Inquiry Basket

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.


About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.

NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search