Home » Profiles » Tannin Based Wood Adhesive - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost And Revenue

Tannin Based Wood Adhesive - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost And Revenue

Tannin is an excellent renewable resource for replacing petroleum-derived phenolic compounds. The major wood species from which it can be obtained are mimosa, quebracho and radiata pine. It is mainly concentrated in the inner layer of the bark and has been utilized in the adhesives industry in Africa, South America and Oceania. In particular, tannin-based wood adhesives have been used industrially for quite a long time in several countries for the manufacture of exterior wood panels. There are two different types of tannin: wattle tannin composed of resorcinol A-rings and pine tannin composed of phloroglucinol A-rings with catechol or pyrogallol B-rings. The free C6 or C8 sites on the A-ring react with formaldehyde, due to their strong nucleophilicity, to form the adhesive. The phenolic nuclei in tannins also react with formaldehyde. This high reactivity of tannins towards formaldehyde is the result of their A-ring phloroglucinolic or resorcinolic nuclei, which haved 10- to 50-times higher rate of reaction than the reaction of phenol with formaldehyde. Because of this characteristic, less free formaldehyde emission occurs than from other wood adhesives such as phenol– formaldehyde, urea–formaldehyde, etc. Tannins are an important ingredient in the process of tanning leather. Tanbark from oak, mimosa, chestnut and quebracho tree has traditionally been the primary source of tannery tannin, though inorganic tanning agents are also in use today and account for 90% of the world's leather production. Therefore, it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Advanced Adhesives Ltd. • Arofine Polymers Ltd. • C I C O Technologies Ltd. • Ciba India Ltd. • F C L Technologies & Products Ltd. • Feroke Boards Ltd. • Henkel C A C Pvt. Ltd. • India Tyre & Rubber Co. (India) Ltd. • Jesons Industries Ltd. • Jyoti Resins & Adhesives Ltd. • Kitply Industries Ltd. • Mica House Ltd. • N G Adhesive Inds. Pvt. Ltd. • Nikhil Adhesives Ltd. • Pidilite Industries Ltd. • Resinova Chemie Ltd. • Uflex Ltd.
Plant capacity: Tannin Based Wood: 8 MT/Day8 MT/DayPlant & machinery: Rs 72 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 517 Lakhs
Return: 27.77%Break even: 46.58%
Email Us | Add to Inquiry Add to Inquiry Basket

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.


About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.

NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search