Lpg Cylinders - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost And Revenue, Plant Economics
|Liquefied petroleum gas (LPG) is a term describing a group of hydrocarbon-based gases derived from crude oil and or natural gas. Natural gas purification produces about 55 percent of all LPG, while crude oil refining produces about 45 percent. LPG is mostly propane, butane or a mix of the two. It also includes ethane, ethylene, propylene, butylene, isobutene and isobutylene; these are used primarily as chemical feed stocks rather than fuel. The ultimate use of the LPG cylinder is for the storage and transportation of gas from one place to another. As the gas pipe line can only be managed to the nearby area of the gas producing centre, (though it is not applicable in India until now) the use of this cylinder has developed. The technology of transportation, e.g. U.S., U.K. etc. they have formed the system of piping. The supply is regulated a controlled from the initial point. But in India this is not applicable till now. Here the use of cylinder is existing; it is the only mode of supply and transportations of gas for cooking purpose. The LPG cylinder industry has grown phenomenally since early 1980s, when there were just about a dozen manufacturers. There was not much of LPG (liquefied petroleum gas) available for distribution and hence the need for cylinders was limited. Bharat Petroleum Corporation (BPCL) has accordingly initiated the process of launching the transparent fiberglass cylinders as a premium product in the country. The corporation has proposed making these cylinders available on demand with delivery within two hours. Due to demand growth, it is a good project for entrepreneurs to invest. Any entrepreneurs venture into this field will be successful. Few Indian Major Players are as under:- Balaji Pressure Vessels Ltd. Bharat Wagon & Engg. Co. Ltd. Confidence Petroleum India Ltd. Everest Kanto Cylinder Ltd. Haryana Land Reclamation & Devp. Corpn. Ltd. Himachal Pradesh State Civil Supplies Corpn. Ltd. Hyderabad Allwyn Ltd. J R Fabricators Ltd. Kanodia Petroleum Ltd. Karnataka Pressure Vessels Ltd. Mahaveer Cylinders Ltd. Mauria Udyog Ltd. Minda Autogas Ltd. North India Wires Ltd. Pearey Lal & Sons Pvt. Ltd. Punjab Gas Cylinders Ltd. Rajasthan Cylinders & Containers Ltd. Sanmati Metals Ltd.|
|Plant capacity: L.P.G. Cylinders (14.2 Kgs Size): 180 Nos./Day, L.P.G. Cylinders (19 Kgs Size): 180 Nos./Day||Plant & machinery: Rs. 310 Lakhs|
|Working capital: -||T.C.I: Cost of Project : Rs. 547 Lakhs|
|Return: 21.00%||Break even: 56.00%|
|Email Us | Add to Inquiry Basket|
We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.
Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.Information
- One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
- One Crore is equivalent to ten million (10,000,000)
- T.C.I is Total Capital Investment
- We can modify the project capacity and project cost as per your requirement.
- We can also prepare project report on any subject as per your requirement.
- Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.
About NIIR PROJECT CONSULTANCY SERVICES
NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.
NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.
Products & Services