Home » Profiles » I. V. Fluid - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost And Revenue, Plant Economics

I. V. Fluid - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost And Revenue, Plant Economics

Intravenous fluids are fluids which are intended to be administered to a patient intravenously, directly through the circulatory system. These fluids must be sterile to protect patients from injury, and there are a number of different types available for use. Fluids are given when someone's body fluid volume falls. There are a number of things which can cause a drop in fluid volume. Vomiting and diarrhea are a classic example, which is why people are encouraged to drink fluids when they are sick, to keep their fluid volume stable. Another cause is blood loss, which causes problems both because people lose blood products, and because they experience a loss in fluid volume. Electrolyte levels in the blood can also become unstable as a result of rapid changes in fluid volume, in which case intravenous fluids can be used to restore the balance. Intravenous fluids can be broken into two broad groups. Crystalloids such as saline solutions contain a solution of molecules which can dissolve in water. When crystalloids are administered, they tend to create low osmotic pressure, allowing fluid to move across the blood vessels, and this can be linked with edema. Colloids contain particles which are not soluble in water, and they create high osmotic pressure, attracting fluid into the blood vessels. Blood is an example of a commonly administered intravenous colloid. Intravenous fluids can also be used as a route of medication administration. If a doctor wants to deliver a small amount of medication over an extended period of time, it can be dissolved in a bag of intravenous fluids and set on an infusion pump which delivers the medicated fluid directly into the blood. They are also commonly used to assist with surgical recovery; people who receive fluids after surgery tend to experience better recovery than people who do not. There are many solutions are used for IV fluids. The specific one used depends on the situation. Many other compounds can be added to the IV solution as a simple means of administration. For example, antibiotics, pain killers and so on can be added to the IV so the patient receives the drug at a constant rate over a long period of time. The basic function of IV fluids is to replenish the body fluids. Although there are a number of IV fluids but generally three types of IV fluids are used in hospitals as IV drips. They are as follows: 1. Dextrose injection fluid 2. Dextrose and sodium chloride injection fluid 3. Sodium chloride injection solution (Saline solution). When saline is injected intravenously, it compensate the deficiency of sodium ions when dextrose is injected it gives energy due to glucose content of it when dextro-saline is given in combination, it replenishes the dehydration as well as gives energy thereby recouping debility syndrome and also in general take care of malaise. Uses There are four main ranges of application of highly specialized intravenous infusion solutions: 1. Treatment of discarded water and electrolyte metabolism, especially in severe cases. 2. Therapy of acid base in balances. 3. The volume substitution and volume replacement in surgery of accident victim suffering blood loss. 4. Paratral nutrition for severally ill and post-operative patients. 5. Aqueous isotonic injection (5%) of dextrose is given as intravenous injections to increase the column of circulating blood in the shocks and haemarrhages and to counteract dehydration. When it is desired to replace excessive salt loss also glucose is injected along with sodium chloride. 6. Dextrose solution is used during postoperative period when sodium extraction is reduced. 7. Dextrose solution with concentration of 10-15% is used as diuretic for increase in urine flow. 8. Dextrose solutions of 5% normal salinic are used for restoring fluid volume in circulation of an emergency as in accidents with haemarrhage. Saline solution is used when large amount of sodium has been lost by vomiting or by gastric or intestinal duodenal aspiration or through an alimentary fistula. 9. Dextrose monohydrate is used as supplement to cow's milk in part of feeding. 10. Hypertonic dextrose solution (25-50%) is in medical treatment partly because they are believed to strengthen heart muscles. Hypertonic solutions are used in intravenous injection to relieve intractable pressure in-patient with hydrocephalus and meningitis. Market Survey India's traditions in the science of health and healing go back to the halcyon days of Surushta, Vagbhatta and Charaka. Our system of medicine like Ayurveda were well established and schools and hospitals with treatises and instruction manuals were in wide use. The establishment of modern pharmaceutical industry in India may be said to have commercial with the selling up of Bengal chemicals by acharya P.C Ray in Kolkata and of Alembic Chemical in B.D Amin. The growth of I.V. fluid manufacturing was faster than the growth rate of drugs. I.V fluids are the solutions applied directly to the vein of a patient who suffer from the weaknesses due to the deficiency of body fluids. These IV fluids are the best alternative which can yield sudden result in the health of a patient by replanishing the body fluids. Liquid glucose and dextrose are being produced in the organized sector. Glucose is produced in solid as well as in liquid form and dextrose is in anhydrous and monohydros form. The installed capacity, production and capacity utilization of liquid glucose are indicated below. I.V. fluid demand is normally linked to the number of hospital beds. Observations show that 18 bottles of I.V. fluids are consumed per bed per month in the country. The demand is estimated to increase at a rate of 9 to 12% per annum. The present demand level is estimated to be around 2200 Lakh bottles per annum. Areas with high population density and average temperatures are major consumption areas of I.V. fluids. Demand is high Uttar Pradesh, Rajasthan, Haryana, Bihar, Madhya Pradesh and West Bengal. North India alone account for one third of the total demand in the country. Few Indian Major Players are as under Ahlcon Parenterals (India) Ltd. Core Laboratories Ltd. Gujarat Ambuja Proteins Ltd. Gujarat Inject Ltd. Haffkine Bio-Pharmaceutical Corpn. Ltd. India Infusion Ltd. Indian Maize & Chemicals Ltd. K G Gluco Biols Ltd. Kamala Sugar Mills Ltd. Kokad Pharmaceutical Laboratories Ltd. Marck Biosciences Ltd. Origin Agrostar Ltd. Parenteral Surgicals Ltd. Senbo Industries Ltd. Span Medicals Ltd. Tirupati Starch & Chemicals Ltd. Unique Sugars Ltd. Wockhardt Health Care Ltd.
Plant capacity: 144,00,000 Bottles/AnnumPlant & machinery: Rs. 808 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1367 Lakhs
Return: 26.00%Break even: 46.00%
Email Us | Add to Inquiry Add to Inquiry Basket

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.


About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.

NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search