Lpg Storage (tank Farm) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost And Revenue
|Liqui?ed Petroleum Gas (LPG) is a term describing a group of hydrocarbon based gases derived from crude oil and or natural gas. Natural Gas purification produces about 55 percent of all LPG, while crude oil re?ning produces about 45 percent. LPG is mostly propane, butane or a mix of the two. LPG becomes a liquid at normal pressure and a temperature of 42° C, or at normal temperatures under a pressure of about eight atmospheres. LPG is stored primarily as a liquid at a moderate pressure, depending only on the ambient air temperature around the cylinder. LPG bulk tanks are normally filled to 87% of their capacity as this allows sufficient vapour space above the liquid level for the propane to expand and contract with changes in temperature. A major advantage of propane which has the formula of C3H8, meaning that each molecule consists of just three carbon atoms and eight hydrogen atoms is that it forms very few harmful pollutants. In fact, the hydrocarbon emissions from a gas powered engine are not radical... in other words, they do not react with sun light and oxides of nitrogen to form photo chemical smog. Uses and Applications LPG, primarily propane, is widely used as a fuel for heating and cooking. Its transportability and easy storage have boosted its popularity. Although relatively few urban residences depend upon large propane tanks for heating and cooking, smaller tanks for outdoor grills are extremely common throughout the nation.Propane also is used to generate electricity through microturbines and combined heat and power (CHP) technology. Microturbines are very small turbines intended to generate electricity for homes or commercial establishments, as well as for vehicles such as hybrid buses. Advantages Abundant local supplies – vast reserves, without relying on imports, Cheap – a small fraction of the cost of petrol and diesel; Readily available – excellent infra structure that is still expanding to remote areas; Safe Extremely strong storage tanks – cylindrical with round ends; Gaseous fuel – disperses and diffuses quickly; Higher ignition temperature – 470 0C compared with 300 – 400 0C for petrol; Higher lower flammability limit – 1.9% volume in air, compared with 0.6% for petrol, on toxic (anaesthetic only);High octane rating Prevents detonation – stops pinging or knocking etc.|
|Plant capacity: 12000 MT/Day||Plant & machinery: Rs 3033 Lakhs|
|Working capital: -||T.C.I: Cost of Project : Rs 27661 Lakhs|
|Return: 0.01%||Break even: N/A|
|Email Us | Add to Inquiry Basket|
We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.
Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.Information
- One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
- One Crore is equivalent to ten million (10,000,000)
- T.C.I is Total Capital Investment
- We can modify the project capacity and project cost as per your requirement.
- We can also prepare project report on any subject as per your requirement.
- Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.
About NIIR PROJECT CONSULTANCY SERVICES
NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.
NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.
Products & Services