Tempering/toughening Flat Glass - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost & Revenue
|Profile Tempered glass is made from normal annealed glass via a thermal tempering process in which the glass is subjected to heat till its softening point and then rapidly cooled. This increases the strength of the glass. A fully tempered glass is 4 to 5 times stronger than an annealed glass of similar thickness. A fully tempered glass is regarded as a safety glass and when it breaks it disintegrates into small blunt pieces which greatly reduce the chances of injuries and if there are any then they are superficial in nature. Toughened or tempered glass is a type of safety glass processed by controlled thermal or chemical treatments to increase its strength compared with normal glass. Tempering creates balanced internal stresses when broken which cause the glass, to crumble into small granular chunks instead of splintering into jagged shards. The granular chunks are less likely to cause injury. Application It Toughened glass is used when strength, thermal resistance and safety are important considerations. The most commonly encountered tempered glass is that used for side and rear windows in automobiles, used for its characteristic of shattering into small cubes rather than large shards. (The windscreen or windshield is instead made of laminated glass, which will not shatter when broken.) Toughened glass is also used in buildings for unframed assemblies (such as frameless doors), structurally-loaded applications, and any other application that would become dangerous in the event of human impact. Market Scenario Glass is environment friendly and has tremendous growth opportunities in India, as India is one of the fastest growing economies in the world. The size of the glass industry in India is around $2.5 billion, out of which the container glass industry is around $0.87 billion. The major consumer industries for container glass are: liquor, beer, pharmaceuticals, soft drinks, food, and non-CSD segments. Export has a 10% share of the total container glass industry offtake in India. The alcohol segment uses more than 60% of the container glass segment, followed by food and beverages industries. The size of the float glass segment is around $0.75 billion in India, and is growing as a result of growth in construction and automotive sectors. The float glass market of India has huge growth potential. It is seen that general awareness of using it as building material is slowly increasing in India.|
|Plant capacity: 800 Sq mt/day||Plant & machinery: 189 Lakh|
|Working capital: -||T.C.I: Cost of Project : 559 Lakh|
|Return: 29.00%||Break even: 49.00%|
|Email Us | Add to Inquiry Basket|
We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.
Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.Information
- One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
- One Crore is equivalent to ten million (10,000,000)
- T.C.I is Total Capital Investment
- We can modify the project capacity and project cost as per your requirement.
- We can also prepare project report on any subject as per your requirement.
- Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.
About NIIR PROJECT CONSULTANCY SERVICES
NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.
NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.
Products & Services