Medium Density Fiberboard (mdf Board) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities
|Profile Medium density fiberboard (MDF) is a generic term for a panel primarily composed of lignocellulosic fibers combined with a synthetic resin or other suitable bonding system and bonded together under heat and pressure. MDF is a wood based composite. The primary constituent is a softwood that has been broken down into wood fibres; that is the very cells (tracheids, vessels, fibres and fibre tracheids), which are far smaller entities than those used in particleboard. The panels are compressed to a density of 0.50 to 0.80 and specific gravity (31-50 lb/ft3). Additives may be introduced during manufacturing to improve certain properties. MDF Characteristics: • Width : 1650 mm • Length (grain) : from 1650 to 3660 mm • Thickness : from 6 to 24 mm • Glue type : Urea Carbamide/urea melamine formaldehyde (UMF) • Quality Reference: TU 5536-007-4477-9728-2003 • Density : 700-850 kg/m3 • Dimensions : 3.4.1. Length/width/thickness Application Medium Density Fiberboard (MDF) is widely used in the manufacturing of furniture, kitchen cabinets, door parts, mouldings, millwork and laminate flooring. Common Uses: • Doors, Jambs & Millwork • Laminate Flooring • Laminating & Finishing • Moulding • Office & Residential Furniture • Kitchen Cabinets ? Production Procedure In the production procedure of MDF board following few steps are involved: • Chipping of wood • Defibrating, gluing and drying • Mat forming and processing • Cooling, sanding & trimming • Grading & storage • Impregnation • Lamination Market Potential The global potential demand for panel boards is estimated at 250 million m3 per year and the potential market for MDF alone is 100 million m3. The gap of 150 million m3 can be diverted to particleboard, plywood & OSB. Bulk of the industrial round wood in India is utilized by the saw milling industry, consisting of more than 23,000 units. The projected demand for MDF is 6,70,000 tons, whereas the combined capacity of 2 Plants operating in India (Delhi & Calcutta) is only 1,17,000 cubic meters (88,000 tons). Some shortage is covered by MDF imports of around 3,00,000 tons.|
|Plant capacity: 30000 Cubic meters/Annum||Plant & machinery: 2007 Lakh (40.13 Lakh USD)|
|Working capital: -||T.C.I: Cost of Project : 3534 Lakh (70.68 Lakh USD)|
|Return: 45.00%||Break even: 50.00%|
|Email Us | Add to Inquiry Basket|
We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.
Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.Information
- One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
- One Crore is equivalent to ten million (10,000,000)
- T.C.I is Total Capital Investment
- We can modify the project capacity and project cost as per your requirement.
- We can also prepare project report on any subject as per your requirement.
- Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.
About NIIR PROJECT CONSULTANCY SERVICES
NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.
NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.
Products & Services