Home » Profiles » Adhesive (fevicol Type) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost And Revenue

Adhesive (fevicol Type) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost And Revenue

Fevicol type adhesive come under the category of Synthetic resins and latex adhesives are made from Polyvinyl acetate is thermoplastic, odourless, tasteless, non toxic, essentially clear and colorless resin. It has a non Crystalline and relatively branched rather than linear structure. Most grades of resin have somewhat broad molecular weight distribution. They do not melt but soften over a temperature range. The resin is unaffected by sunlight, ultraviolet light and air, further more it will absorb a small amount of water. Polyvinyl acetate is neutral and non-corrosive. The Various grades have good heat stability below 100ºC, show slight discoloration at approximately 150º and decompose at 50ºC show slight discoloration at approximately 150ºC but brittle at 10ºC to 15ºC. The adhesive industry is currently the most important outlet for polyvinyl acetate. Polyvinyl acetate came into widespread use in 1940’s as a synthetic resin substitute for hide glue. Adhesives are made in various types and may be synthetic or natural. The term synthetic adhesive means the adhesive which is prepared by using synthetic chemical such as synthetic resin. The manufacture of adhesive from synthetic resin is simple and can be started with very little investment. The most advantage to any type of adhesive as per market demand. Polyvinyl acetate is now used in adhesives for various applications such as Book binding, Paper bag, Milk Can, Drinking straws, Envelopes, Gummed Tapes, and Foils etc. The vinyl acetate adhesive is also used for lamination, combination of two or more plies of material into a now composite. The introduction of adhesives based on vinyl acetate has introduction of adhesives based on vinyl acetate is used for the manufacture of ploy vinyl acetate (PVA), Polyvinyl alcohol is being imported from countries like Germany, FRP, France, U.K, Netherlands, Japan, Hungary, Italy, U.S.A and Belgium. Synthetic adhesives Produced in India are mostly base on vinyl Acetate Monomers (V.A.M). VAM is used in from of its various derivatives like Polyvinyl Alcohol and Polyvinyl Acetate, Ethyl Vinyl Acetate etc. There is a very good scope in this sector and new entrepreneurs should venture into this field.
Plant capacity: 300 MT/AnnumPlant & machinery: 11 Lakhs
Working capital: -T.C.I: 123 Lakhs
Return: 49.00%Break even: 38.00%
Email Us | Add to Inquiry Add to Inquiry Basket

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.


About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.

NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search