Copper Wire Drawing (from Higher Size To Very Thin Size Used In Electrical Cables) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials
|Copper wire is an essential material for electrical cables and motor and transformer winding. Copper wire is available in different gauges (42 gauges to 18 gauges). The gauge of the copper wire depends upon the winding required for the specific motor or transformer. There is a heavy market for copper wire in motor and transformer manufacture and the copper is also used in rewinding of motors and transformers. Whatever the motor may be the winding of copper wire is done. On the basis of high conductivity, strength and ductility, copper wires are adopted as the best known economical material for such purposes. Copper is used mainly in the electrical industry for manufacturing parts of electrical apparatus, bus bars, wire etc. Copper is not very ductile at temperature from 250 to 6000C and cannot be forged or stamped at temperatures above 8000C, due to its high brittleness. Pure copper is very seldom forged or stamped and usually only its alloys bronze and brass are subjected to forging and pressing. Wire is made by cold drawing hot-rolled wire/rod through one or more dies, to decrease its size and increase the physical properties. The wire rod about 7/32" (6mm) in diameter is rolled from a single billet and cleaned in an acid bath to remove scale rust and coating. The coating is applied to prevent oxidation, neutralize any remaining acid and to act as a lubricant or a coasting to which a later applied lubricant may cling. There is a very good scope for this product and new entrepreneurs should venture into this field. Few Indian Major Players are as under: Metal Aids India, Mumbai Nissan Copper Limited Samitan Electropowers (P) Limited S. M. Enterprises, New Delhi Niki Cables Industries Bharat Insulation Company (India) Ltd Elecon Conductors Limited Saru Concast Alloys Pvt. Ltd. GTB Indo Exports Shree Nursingsahay Mudungopal Engineers Private Limited Metro Steel Corporation Optiflex Industries Nana Udyog Saru Copper Alloy Semis (P) Ltd. Manhar Metal Supply Corporation Harness Techniques(i) Pvt Ltd National Wire Industries Metal Aids India Indo German Wire Screen Co. A. P. S. Enterprises Oasis Electronics Max Engineering and Marketing Company KMA Electricals (P) Ltd. Sharpwire Industries (India) Private Limited Kawa Machine Tools Sdn Bhd Dali Electronics Vijay Trading Corporation|
|Plant capacity: 150 MT/Annum||Plant & machinery: 69 Lakhs|
|Working capital: -||T.C.I: 167 Lakhs|
|Return: 45.00%||Break even: 42.00%|
|Email Us | Add to Inquiry Basket|
We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.
Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.Information
- One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
- One Crore is equivalent to ten million (10,000,000)
- T.C.I is Total Capital Investment
- We can modify the project capacity and project cost as per your requirement.
- We can also prepare project report on any subject as per your requirement.
- Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.
About NIIR PROJECT CONSULTANCY SERVICES
NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.
NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.
Products & Services